freescale i.MX25 WINCE映像烧写
请教玩过freescale ARM处理器的达人:
最近使用i.MX25系列,官方文档已经看遍了,能够通过ATK工具将
XLDR.nb0以及eboot.nb0烧写到TF卡里面并正常启动,但是按照官方
的文档尝试下载NK映像不成功。
在pdk16_imx25_WinCE60_UG.pdf文档中,
第5.3节,配置以太网连接下载和调试步骤如下:
1.From the Platform Builder Target menu, choose Connectivity Options.
2.Choose Kernel Service Map.
3.In the Target Device box, choose a target device.
4.In the Download box, choose Ethernet as the download service.
5.Launch EBOOT on the target. After EBOOT initialization completes, you should see BOOTME
messages appear on the serial debug output. Observe the device name created by EBOOT on the
serial debug output.
6.To the right of the Download box, choose Settings. The device name of your target should appear
in the Active Devices box.
7.Select your target from the Active Devices box, and then choose OK.
8.In the Transport box, choose Ethernet as a kernel transport.
9.To the right of the Transport box, choose Settings.
10.Check the box next to Use device name from bootloader and then choose OK.
11.If your run-time image includes support for the kernel debugger stub, KdStub, choose KdStub
from the Debugger box. If your run-time image does not include support for a debugger, choose
None from the Debugger box.
12.Choose Core Service Settings.
13.To instruct the Platform Builder to download a run-time image each time the Platform Builder
connects with the target device, choose Always under Download Image.
14.Select Enable KITL on device boot.
15.Select Clear memory on soft reset.
16.Select Enable access to desktop files.
17.Choose Apply.
18.Choose Close.
第3步:选择一个目录设备,这里默认选CE Device?
第6步:下载键右边点设置,一直没有设备名出来,因此后面的步骤无法进行。
期待高手指点。