移植3G模块，遇到拨号上网问题PPD不成功

[FrankBIBI]

I/pppd ( 495): Serial connection established.
D/pppd ( 495): using channel 2
I/pppd ( 495): Using interface ppp0
I/pppd ( 495): Connect: ppp0 <--> /dev/ttyUSB3
D/Tethering( 120): ppp0 is not a tetherable iface, ignoring
D/pppd ( 495): sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9c23abd> <pcomp> <accomp>]
D/pppd ( 495): rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <auth chap MD5> <magic 0x165bcb5> <pcomp> <accomp>]
D/pppd ( 495): No auth is possible
D/pppd ( 495): sent [LCP ConfRej id=0x4 <auth chap MD5>]
D/pppd ( 495): rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xf9c23abd> <pcomp> <accomp>]
D/pppd ( 495): rcvd [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x165bcb5> <pcomp> <accomp>]
D/pppd ( 495): sent [LCP ConfAck id=0x5 <asyncmap 0x0> <magic 0x165bcb5> <pcomp> <accomp>]
D/pppd ( 495): sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
D/pppd ( 495): sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
D/pppd ( 495): rcvd [LCP DiscReq id=0x6 magic=0x165bcb5]
D/pppd ( 495): rcvd [LCP ProtRej id=0x7 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
[ 137.624910] s3c_get_bat_level : bat_vol=361
D/pppd ( 495): rcvd [IPCP ConfReq id=0x2]
D/pppd ( 495): sent [IPCP ConfNak id=0x2 <addr 0.0.0.0>]
D/pppd ( 495): rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 0[ 138.105480] ####__dev_change=0
[ 138.107929] #####open-set link state!!!
1>]
D/pppd ( 495): sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
D/pppd ( 495): rcvd [IPCP ConfReq id=0x3]
D/pppd ( 495): sent [IPCP ConfAck id=0x3]
D/pppd ( 495): rcvd [IPCP ConfNak id=0x2 <addr 172.26.98.153> <ms-dns1 221.12.1.227> <ms-dns3 221.12.33.227>]
D/pppd ( 495): sent [IPCP ConfReq id=0x3 <addr 172.26.98.153> <ms-dns1 221.12.1.227> <ms-dns3 221.12.33.227>]
D/pppd ( 495): rcvd [IPCP ConfAck id=0x3 <addr 172.26.98.153> <ms-dns1 221.12.1.227> <ms-dns3 221.12.33.227>]
W/pppd ( 495): Could not determine remote IP address: defaulting to 10.64.64.64
I/pppd ( 495): local IP address 172.26.98.153
I/pppd ( 495): remote IP address 10.64.64.64
I/pppd ( 495): primary DNS address 221.12.1.227
I/pppd ( 495): secondary DNS address 221.12.33.227
D/pppd ( 495): Script /etc/ppp/ip-up started (pid 498)
D/pppd ( 495): Script /etc/ppp/ip-up finished (pid 498), status = 0x0


不知道为什么呢~

[wyjq395]

不懂，对LCP包不了解，学习。
不过看到D/pppd ( 495): No auth is possible,不知道是不是用户密码不对？
楼主使用的测试环境是模拟的还是真实的电信的网络？

[FrankBIBI]

我是真实的联通网络~

[FrankBIBI]

搞定~我发现发帖 基本都是自问自答了 已经很久了呢~是我做的东西太偏了？呵呵~。。。。

[lovehahaforever]

看一下你的/etc/ppp/chap-secrets

联通好像也不用验证用户名和密码，但不能为空，你可以添加一行“3gnet” * "GSM"试试

[FrankBIBI]

谢谢 各位 ~上周就搞好了~modem口搞错了~换一个就可以了~

[FrankBIBI]

W/pppd ( 495): Could not determine remote IP address: defaulting to 10.64.64.64
I/pppd ( 495): local IP address 172.26.98.153
I/pppd ( 495): remote IP address 10.64.64.64
I/pppd ( 495): primary DNS address 221.12.1.227
I/pppd ( 495): secondary DNS address 221.12.33.227
D/pppd ( 495): Script /etc/ppp/ip-up started (pid 498)
D/pppd ( 495): Script /etc/ppp/ip-up finished (pid 498), status = 0x0

到这里其实就已经开始连网了~会发起一个time的连接~

[linshutao]

之前也搞过类似的，你网关设置对了没？

[fx397993401]

同时不懂 顶

[fensnote]

怎么解决的？

[wolflovegirl]

Could not determine remote IP address: defaulting to 10.64.64.64
not replacing existing default route via 192.168.168.1
local IP address 10.230.218.238
remote IP address 10.64.64.64
primary DNS address 221.5.88.88
secondary DNS address 210.21.4.130
我做的出现这样，应该也拨号成功了吧，但是无法ping通啊
你的会ping通吗

[wolflovegirl]

Could not determine remote IP address: defaulting to 10.64.64.64
not replacing existing default route via 192.168.168.1
local IP address 10.230.218.238
remote IP address 10.64.64.64
primary DNS address 221.5.88.88
secondary DNS address 210.21.4.130
我做到这里了应该是拨号成功了，但是ping不通怎么回事啊