一个编写word程序引用了Word_TLB,Word2010这两个uses，使用break就会报错，而且提示break属于Word_TLB或Word2010

kaixin9611 2016-11-18 04:21:02

一个编写word程序引用了Word_TLB,Word2010这两个uses，使用break就会报错，而且提示break属于Word_TLB或Word2010

报错的break位置代码为：
if RzStringGrid1.Cells[4,i + 1]=EmptyStr then
begin
break
end
else
begin
sEdit2.Text:=FloatToStr(StrToFloat(sEdit2.Text) + StrToFloat(RzStringGrid1.Cells[4,i + 1 ] ));
end;
RzStringGrid1.RowCount:=RzStringGrid1.RowCount + 1;

编译时，错误代码为：
[dcc32 Error] MainForm.pas(1173): E2014 Statement expected, but expression of type 'TGUID' found

究竟如何解决呢？

各位高手

...全文

726 2 打赏收藏转发到动态举报

写回复

2 条回复

切换为时间正序

请发表友善的回复…

发表回复

lyhoo163 2016-11-18

打赏
举报

回复

解决了，接分啊。。。。

kaixin9611 2016-11-18

打赏
举报

回复

解决问题了用: System.break即可，也就是说将类型具体化。汗~~~

实验三移植U-Boot-1.3.1 实验【实验目的】了解 U-Boot-1.3.1 的代码结构，掌握其移植方法。【实验环境】 1、Ubuntu 7.0.4发行版 2、u-boot-1.3.1 3、FS2410平台 4、交叉编译器 arm-softfloat-linux-gnu-gcc-3.4.5 【实验步骤】一、建立自己的平台类型（1）解压文件 #tar jxvf u-boot-1.3.1.tar.bz2 （2）进入 U-Boot源码目录 #cd u-boot-1.3.1 （3）创建自己的开发板： #cd board #cp smdk2410 fs2410 –a #cd fs2410 #mv smdk2410.c fs2410.c #vi Makefile （将 smdk2410修改为 fs2410） #cd ../../include/configs #cp smdk2410.h fs2410.h 退回 U-Boot根目录：#cd ../../ （4）建立编译选项 #vi Makefile smdk2410_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 fs2410_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t fs2410 NULL s3c24x0 arm: CPU的架构(ARCH) arm920t: CPU的类型(CPU)，其对应于 cpu/arm920t子目录。 fs2410: 开发板的型号(BOARD)，对应于 board/fs2410目录。 NULL: 开发者/或经销商(vender)，本例为空 s3c24x0: 片上系统(SOC) （5）编译 #make fs2410_config; #make 本步骤将编译 u-boot.bin文件，但此时还无法运行在FS2410开发板上。二、修改 cpu/arm920t/start.S文件，完成 U-Boot的重定向（1）修改中断禁止部分 # if defined(CONFIG_S3C2410) ldr r1, =0x7ff /*根据 2410 芯片手册，INTSUBMSK 有 11位可用 */ ldr r0, =INTSUBMSK Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) str r1, [r0] # endif （2）修改时钟设置（这个文件要根据具体的平台进行修改）（3）将从Nor Flash启动改成从 NAND Flash启动在文件中找到 195-201 代码，并在 201行后面添加如下代码： 195 copy_loop: 196 ldmia r0!, {r3-r10} /* copy from source address [r0] */ 197 stmiar1!, {r3-r10} /* copy to target address [r1] */ 198 cmp r0, r2 /* until source end addreee [r2] */ 199 ble copy_loop 200 #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ 201 #endif #ifdef CONFIG_S3C2410_NAND_BOOT @ reset NAND mov r1, #NAND_CTL_BASE ldr r2, =0xf830 @ initial value str r2, [r1, #oNFCONF] ldr r2, [r1, #oNFCONF] bic r2, r2, #0x800 @ enable chip str r2, [r1, #oNFCONF] mov r2, #0xff @ RESET command strb r2, [r1, #oNFCMD] mov r3, #0 @ wait nand1: add r3, r3, #0x1 cmp r3, #0xa blt nand1 nand2: ldr r2, [r1, #oNFSTAT] @ wait ready tst r2, #0x1 beq nand2 ldr r2, [r1, #oNFCONF] orr r2, r2, #0x800 @ disable chip str r2, [r1, #oNFCONF] @ get read to call C functions (for nand_read()) ldr sp, DW_STACK_START @ setup stack pointer mov fp, #0 @ no previous frame, so fp=0 @ copy U-Boot to RAM ldr r0, =TEXT_BASE mov r1, #0x0 mov r2, #0x30000 bl nand_read_ll tst r0, #0x0 beq ok_nand_read Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)bad_nand_read: loop2: b loop2 @ infinite loop ok_nand_read: @ verify mov r0, #0 ldr r1, =TEXT_BASE mov r2, #0x400 @ 4 bytes * 1024 = 4K-bytes go_next: ldr r3, [r0], #4 ldr r4, [r1], #4 teq r3, r4 bne notmatch subs r2, r2, #4 beq stack_setup bne go_next notmatch: loop3: b loop3 @ infinite loop #endif @ CONFIG_S3C2410_NAND_BOOT （4）在 “ _start_armboot: .word start_armboot ”后加入： .align 2 DW_STACK_START: .word STACK_BASE+STACK_SIZE-4 三、创建 board/fs2410/nand_read.c 文件，加入读 NAND Flash 的操作。 #include #define __REGb(x) (*(volatile unsigned char *)(x)) #define __REGi(x) (*(volatile unsigned int *)(x)) #define NF_BASE 0x4e000000 # if defined(CONFIG_S3C2410) #define NFCONF __REGi(NF_BASE + 0x0) #define NFCMD __REGb(NF_BASE + 0x4) #define NFADDR __REGb(NF_BASE + 0x8) #define NFDATA __REGb(NF_BASE + 0xc) #define NFSTAT __REGb(NF_BASE + 0x10) #define BUSY 1 inline void wait_idle(void) { int i; while(!(NFSTAT & BUSY)) for(i=0; i<10; i++); } /* low level nand read function */ int nand_read_ll(unsigned char *buf, unsigned long start_addr, int size) { int i, j; Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) { return -1; /* invalid alignment */ } /* chip Enable */ NFCONF &= ~0x800; for(i=0; i<10; i++); for(i=start_addr; i > 9) & 0xff; NFADDR = (i >> 17) & 0xff; NFADDR = (i >> 25) & 0xff; wait_idle(); for(j=0; j NFCONF = conf; } Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)static inline void NF_Cmd(u8 cmd) { S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); nand->NFCMD = cmd; } static inline void NF_CmdW(u8 cmd) { NF_Cmd(cmd); udelay(1); } static inline void NF_Addr(u8 addr) { S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); nand->NFADDR = addr; } static inline void NF_WaitRB(void) { S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); while (!(nand->NFSTAT & (1NFDATA); } static inline u32 NF_Read_ECC(void) { S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); return(nand->NFECC); } static inline void NF_SetCE(NFCE_STATE s) { S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); switch (s) { case NFCE_LOW: nand->NFCONF &= ~(1 20); } #endif （2）配置GPIO 和 PLL 根据开发板的硬件说明和芯片手册，修改GPIO 和 PLL的配置。六、修改 include/configs/fs2410.h 头文件（1）加入命令定义 /* Command line configuration. */ #include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_PING #define CONFIG_CMD_NAND #define CONFIG_CMD_REGINFO #define CONFIG_CMD_USB #define CONFIG_CMD_FAT （2）修改命令提示符 #define CFG_PROMPT "SMDK2410 # " -> #define CFG_PROMPT "FS2410# " （3）修改默认载入地址 #define CFG_LOAD_ADDR 0x33000000 -> #define CFG_LOAD_ADDR 0x30008000 （4）加入 Flash环境信息 #define CFG_ENV_IS_IN_NAND 1 #define CFG_ENV_OFFSET 0X30000 #define CFG_NAND_LEGACY //#define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ （5）加入Nand Flash设置（在文件结尾处） /* NAND flash settings */ #if defined(CONFIG_CMD_NAND) #define CFG_NAND_BASE 0x4E000000 /* NandFlash控制器在SFR区起始寄存器地址 */ #define CFG_MAX_NAND_DEVICE 1 /* 支持的最在Nand Flash数据 */ #define SECTORSIZE 512 /* 1页的大小 */ #define NAND_SECTOR_SIZE SECTORSIZE Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)#define NAND_BLOCK_MASK 511 /* 页掩码 */ #define ADDR_COLUMN 1 /* 一个字节的Column地址 */ #define ADDR_PAGE 3 /* 3字节的页块地址!!!!!*/ #define ADDR_COLUMN_PAGE 4 /* 总共4字节的页块地址!!!!! */ #define NAND_ChipID_UNKNOWN 0x00 /* 未知芯片的ID号 */ #define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 /* Nand Flash命令层底层接口函数 */ #define WRITE_NAND_ADDRESS(d, adr) {rNFADDR = d;} #define WRITE_NAND(d, adr) {rNFDATA = d;} #define READ_NAND(adr) (rNFDATA) #define NAND_WAIT_READY(nand) {while(!(rNFSTAT&(1<<0)));} #define WRITE_NAND_COMMAND(d, adr) {rNFCMD = d;} #define WRITE_NAND_COMMANDW(d, adr) NF_CmdW(d) #define NAND_DISABLE_CE(nand) {rNFCONF |= (1<<11);} #define NAND_ENABLE_CE(nand) {rNFCONF &= ~(1<<11);} /* the following functions are NOP's because S3C24X0 handles this in hardware */ #define NAND_CTL_CLRALE(nandptr) #define NAND_CTL_SETALE(nandptr) #define NAND_CTL_CLRCLE(nandptr) #define NAND_CTL_SETCLE(nandptr) /* 允许 Nand Flash写校验 */ #define CONFIG_MTD_NAND_VERIFY_WRITE 1 （6）加入Nand Flash启动支持（在文件结尾处） /* Nandflash Boot*/ #define STACK_BASE 0x33f00000 #define STACK_SIZE 0x8000 /* NAND Flash Controller */ #define NAND_CTL_BASE 0x4E000000 #define bINT_CTL(Nb) __REG(INT_CTL_BASE + (Nb)) /* Offset */ #define oNFCONF 0x00 #define CONFIG_S3C2410_NAND_BOOT 1 /* Offset */ #define oNFCONF 0x00 #define oNFCMD 0x04 #define oNFADDR 0x08 #define oNFDATA 0x0c #define oNFSTAT 0x10 #define oNFECC 0x14 #define rNFCONF (*(volatile unsigned int *)0x4e000000) #define rNFCMD (*(volatile unsigned char *)0x4e000004) Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)#define rNFADDR (*(volatile unsigned char *)0x4e000008) #define rNFDATA (*(volatile unsigned char *)0x4e00000c) #define rNFSTAT (*(volatile unsigned int *)0x4e000010) #define rNFECC (*(volatile unsigned int *)0x4e000014) #define rNFECC0 (*(volatile unsigned char *)0x4e000014) #define rNFECC1 (*(volatile unsigned char *)0x4e000015) #define rNFECC2 (*(volatile unsigned char *)0x4e000016) #endif （7）加入 jffs2的支持 /*JFFS2 Support */ #undef CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_NAND 1 #define CONFIG_JFFS2_DEV "nand0" #define CONFIG_JFFS2_PART_SIZE 0x4c0000 #define CONFIG_JFFS2_PART_OFFSET 0x40000 /*JFFS2 Support */ （8）加入 usb的支持 /* USB Support*/ #define CONFIG_USB_OHCI #define CONFIG_USB_STORAGE #define CONFIG_USB_KEYBOARD #define CONFIG_DOS_PARTITION #define CFG_DEVICE_DEREGISTER #define CONFIG_SUPPORT_VFAT #define LITTLEENDIAN /* USB Support*/ 七、修改 include/linux/mtd/nand.h头文件屏蔽如下定义： #if 0 /* Select the chip by setting nCE to low */ #define NAND_CTL_SETNCE 1 /* Deselect the chip by setting nCE to high */ #define NAND_CTL_CLRNCE 2 /* Select the command latch by setting CLE to high */ #define NAND_CTL_SETCLE 3 /* Deselect the command latch by setting CLE to low */ #define NAND_CTL_CLRCLE 4 /* Select the address latch by setting ALE to high */ #define NAND_CTL_SETALE 5 /* Deselect the address latch by setting ALE to low */ #define NAND_CTL_CLRALE 6 /* Set write protection by setting WP to high. Not used! */ #define NAND_CTL_SETWP 7 /* Clear write protection by setting WP to low. Not used! */ Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)#define NAND_CTL_CLRWP 8 #endif 八、修改 include/linux/mtd/nand_ids.h 头文件在该文件中加入开发板的 NAND Flash型号 {"Samsung K9F1208U0B", NAND_MFR_SAMSUNG, 0x76, 26, 0, 4, 0x4000, 0}, 九、修改 common/env_nand.c文件我们使用了早期的Nand读写方式，因此做出下列移植： (1) 加入函数原型定义 extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; extern int nand_legacy_erase(struct nand_chip *nand, size_t ofs, size_t len, int clean); /* info for NAND chips, defined in drivers/nand/nand.c */ extern nand_info_t nand_info[CFG_MAX_NAND_DEVICE]; (2) 修改saveenv函数注释//if (nand_erase(&nand_info[0], CFG_ENV_OFFSET, CFG_ENV_SIZE)) 加入：if (nand_legacy_erase(nand_dev_desc + 0, CFG_ENV_OFFSET, CFG_ENV_SIZE, 0)) 注释//ret = nand_write(&nand_info[0], CFG_ENV_OFFSET, &total, (u_char*)env_ptr); 加入：ret = nand_legacy_rw(nand_dev_desc + 0,0x00 | 0x02, CFG_ENV_OFFSET, CFG_ENV_SIZE, &total, (u_char*)env_ptr); (3) 修改env_relocate_spec函数注释//ret = nand_read(&nand_info[0], CFG_ENV_OFFSET, &total, (u_char*)env_ptr); 加入：ret = nand_legacy_rw(nand_dev_desc + 0, 0x01 | 0x02, CFG_ENV_OFFSET, CFG_ENV_SIZE, &total, (u_char*)env_ptr); 十、修改 common/cmd_boot.c 文件，添加内核启动参数设置 (1) 首先添加头文件#include (2) 修改do_go函数。具体修改为： int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { #if defined(CONFIG_I386) DECLARE_GLOBAL_DATA_PTR; #endif ulong addr, rc; int rcode = 0; ///////////////////////////////////////////////////////////////////////// char *commandline = getenv("bootargs"); struct param_struct *my_params=(struct param_struct *)0x30000100; memset(my_params,0,sizeof(struct param_struct)); my_params->u1.s.page_size=4096; my_params->u1.s.nr_pages=0x4000000>>12; memcpy(my_params->commandline,commandline,strlen(commandline)+1); Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)/////////////////////////////////////////////////////////////////////// if (argc usage); return 1; } addr = simple_strtoul(argv[1], NULL, 16); printf ("## Starting application at 0x%08lX ...\n", addr); /* * pass address parameter as argv[0] (aka command name), * and all remaining args */ #if defined(CONFIG_I386) /* * x86 does not use a dedicated register to pass the pointer * to the global_data */ argv[0] = (char *)gd; #endif #if !defined(CONFIG_NIOS) //////////////////////////////////////////////////////////////////// __asm__( "mov r1, #193\n" "mov ip, #0\n" "mcr p15, 0, ip, c13, c0, 0\n" /* zero PID */ "mcr p15, 0, ip, c7, c7, 0\n" /* invalidate I,D caches */ "mcr p15, 0, ip, c7, c10, 4\n" /* drain write buffer */ "mcr p15, 0, ip, c8, c7, 0\n" /* invalidate I,D TLBs */ "mrc p15, 0, ip, c1, c0, 0\n" /* get control register */ "bic ip, ip, #0x0001\n" /* disable MMU */ "mov pc, %0\n" "nop\n" : :"r"(addr) ); ////////////////////////////////////////////////////////// rc = ((ulong (*)(int, char *[]))addr) (--argc, &argv[1]); #else /* * Nios function pointers are address >> 1 */ rc = ((ulong (*)(int, char *[]))(addr>>1)) (--argc, &argv[1]); #endif if (rc != 0) rcode = 1; Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) printf ("## Application terminated, rc = 0x%lX\n", rc); return rcode; } 其中用//括起来的代码是要添加的代码。否则在引导LINUX 内核的时候会出现一个 Error： a 或无法传递内核启动参数的错误。其原因是平台号或启动参数没有正确传入内核。十一、交叉编译 U-BOOT #make distclean #make fs2410_config export PATH=$PATH:/home/linux/crosstool/gcc-3.4.5-glibc-2.3.6/arm-softfloat-linux-gnu/bin: #make CROSS_COMPILE= arm-softfloat-linux-gnu- 生成的 u-boot.bin 即为我们移植后的结果。下载到开发板上运行！ Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)U-Boot简介 U-Boot，全称 Universal Boot Loader，是遵循 GPL 条款的开放源码项目。从 FADSROM、 8xxROM、PPCBOOT 逐步发展演化而来。其源码目录、编译形式与 Linux 内核很相似，事实上，不少U-Boot源码就是相应的 Linux内核源程序的简化，尤其是一些设备的驱动程序，这从U-Boot源码的注释中能体现这一点。但是U-Boot不仅仅支持嵌入式Linux系统的引导，当前，它还支持 NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS嵌入式操作系统。其目前要支持的目标操作系统是OpenBSD, NetBSD, FreeBSD,4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, LynxOS, pSOS, QNX, RTEMS, ARTOS。这是 U-Boot中 Universal的一层含义，另外一层含义则是 U-Boot除了支持 PowerPC系列的处理器外，还能支持 MIPS、 x86、ARM、NIOS、XScale等诸多常用系列的处理器。这两个特点正是U-Boot 项目的开发目标，即支持尽可能多的嵌入式处理器和嵌入式操作系统。就目前来看，U-Boot 对 PowerPC 系列处理器支持最为丰富，对 Linux 的支持最完善。其它系列的处理器和操作系统基本是在2002年11 月PPCBOOT改名为U-Boot后逐步扩充的。从PPCBOOT向U-Boot 的顺利过渡，很大程度上归功于 U-Boot 的维护人德国 DENX 软件工程中心 Wolfgang Denk[以下简称 W.D]本人精湛专业水平和持着不懈的努力。当前，U-Boot 项目正在他的领军之下，众多有志于开放源码 BOOT LOADER移植工作的嵌入式开发人员正如火如荼地将各个不同系列嵌入式处理器的移植工作不断展开和深入，以支持更多的嵌入式操作系统的装载与引导。选择 U-Boot的理由： ① 开放源码； ② 支持多种嵌入式操作系统内核，如 Linux、NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS； ③ 支持多个处理器系列，如 PowerPC、ARM、x86、MIPS、XScale； ④ 较高的可靠性和稳定性； ④ 较高的可靠性和稳定性； ⑤ 高度灵活的功能设置，适合U-Boot调试、操作系统不同引导要求、产品发布等； ⑥ 丰富的设备驱动源码，如串口、以太网、SDRAM、FLASH、LCD、NVRAM、EEPROM、 RTC、键盘等； ⑦ 较为丰富的开发调试文档与强大的网络技术支持； U-Boot主要目录结构 - board 目标板相关文件，主要包含 SDRAM、FLASH 驱动； - common 独立于处理器体系结构的通用代码，如内存大小探测与故障检测； - cpu 与处理器相关的文件。如 mpc8xx子目录下含串口、网口、LCD 驱动及中断初始化等文件； - driver 通用设备驱动，如 CFI FLASH 驱动（目前对INTEL FLASH 支持较好） Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)- doc U-Boot的说明文档； - examples可在 U-Boot下运行的示例程序；如 hello_world.c,timer.c； - include U-Boot头文件；尤其 configs子目录下与目标板相关的配置头文件是移植过程中经常要修改的文件； - lib_xxx 处理器体系相关的文件，如 lib_ppc, lib_arm目录分别包含与 PowerPC、ARM体系结构相关的文件； - net 与网络功能相关的文件目录，如 bootp,nfs,tftp； - post 上电自检文件目录。尚有待于进一步完善； - rtc RTC驱动程序； - tools 用于创建 U-Boot S-RECORD 和 BIN 镜像文件的工具； U-Boot支持的主要功能 U-Boot可支持的主要功能列表系统引导支持NFS挂载、RAMDISK（压缩或非压缩）形式的根文件系统支持 NFS挂载、从 FLASH 中引导压缩或非压缩系统内核；基本辅助功能强大的操作系统接口功能；可灵活设置、传递多个关键参数给操作系统，适合系统在不同开发阶段的调试要求与产品发布，尤对Linux支持最为强劲；支持目标板环境参数多种存储方式，如 FLASH、NVRAM、EEPROM； CRC32校验，可校验 FLASH 中内核、RAMDISK 镜像文件是否完好；设备驱动串口、 SDRAM、 FLASH、以太网、 LCD、 NVRAM、 EEPROM、键盘、 USB、 PCMCIA、 PCI、RTC等驱动支持；上电自检功能 SDRAM、FLASH 大小自动检测；SDRAM故障检测；CPU型号；特殊功能 XIP内核引导；移植前的准备（1）、首先读读 uboot自带的 readme文件，了解了一个大概。（2）、看看 common.h，这个文件定义了一些基本的东西，并包含了一些必要的头文件。再看看 flash.h，这个文件里面定义了 flash_info_t为一个 struct。包含了 flash的一些属性定义。并且定义了所有的 flash 的属性，其中，AMD 的有：AMD_ID_LV320B，定义为“#define AMD_ID_LV320B 0x22F922F9” 。（3）、对于“./borad/at91rm9200dk/flash.c”的修改，有以下的方面： “void flash_identification(flash_info_t *info)”这个函数的目的是确认 flash的型号。注意的是，这个函数里面有一些宏定义，直接读写了 flash。并获得 ID 号。（4）、修改： ”./board/at91rm9200dk/config.mk”为 TEXT_BASE=0x21f80000 为 TEXT_BASE=0x21f00000 （当然，你应该根据自己的板子来修改，和一级boot的定义的一致即可）。 Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)（5）、再修改”./include/configs/at91rm9200dk.h”为修改 flash和 SDRAM的大小。（6）、另外一个要修改的文件是： ./borad/at91rm9200dk/flash.c。这个文件修改的部分比较的多。 a．首先是OrgDef的定义，加上目前的 flash。 b．接下来，修改”#define FLASH_BANK_SIZE 0x200000”为自己flash的容量 c．在修改函数 flash_identification(flash_info_t * info)里面的打印信息，这部分将在 u-boot 启动的时候显示。 d．然后修改函数 flash_init(void)里面对一些变量的赋值。 e．最后修改的是函数 flash_print_info(flash_info_t * info)里面实际打印的函数信息。 f．还有一个函数需要修改，就是： “flash_erase” ，这个函数要检测先前知道的 flash类型是否匹配，否则，直接就返回了。把这里给注释掉。（7）、接下来看看 SDRAM的修改。这个里面对于“SIZE”的定义都是基于字节计算的。只要修改”./include/configs/at91rm9200dk.h”里面的 “#define PHYS_SDRAM_SIZE 0X200000”就可以了。注意，SIZE 是以字节为单位的。（8）、还有一个地方要注意就是按照目前的设定，一级 boot 把 u_boot 加载到了 SDRAM 的空间为：21F00000 -> 21F16B10，这恰好是 SDRAM的高端部分。另外，BSS为 21F1AE34。（9）、编译后，可以写入 flash了。 a．压缩这个 u-boot.bin “gzip –c u-boot.bin > u-boot.gz” 压缩后的文件大小为： 43Kbytes b．接着把 boot.bin和 u-boot.gz 烧到 flash里面去。 Boot.bin大约 11kBytes，在 flash的 0x1000 0000 ~ 0x1000 3fff U-Boot移植过程 ① 获得发布的最新版本 U-Boot源码，与 Linux内核源码类似，也是 bzip2 的压缩格式。可从 U-Boot的官方网站 http://sourceforge.net/projects/U-Boot上获得； ② 阅读相关文档，主要是 U-Boot 源码根目录下的 README 文档和 U-Boot 官方网站的 DULG （ The DENX U-Boot and Linux Guide ）文档 http://www.denx.de/twiki/bin/view/DULG/Manual。尤其是DULG 文档，从如何安装建立交叉开发环境和解决 U-Boot移植中常见问题都一一给出详尽的说明； Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) ③ 订阅 U-Boot 用户邮件列表 http://lists.sourceforge.net/lists/listinfo/u-boot-users。在移植 U-Boot 过程中遇有问题，在参考相关文档和搜索 U-Boot-User 邮件档案库 http://sourceforge.net/mailarchive/forum.php?forum_id=12898 仍不能解决的情况下，第一时间提交所遇到的这些问题，众多热心的 U-Boot开发人员会乐于迅速排查问题，而且很有可能， W.D本人会直接参与指导； ④ 在建立的开发环境下进行移植工作。绝大多数的开发环境是交叉开发环境。在这方面， DENX 和 MontaVista 均提供了完整的开发工具集； ⑤ 在目标板与开发主机间接入硬件调试器。这是进行U-Boot移植应当具备且非常关键的调试工具。因为在整个 U-Boot的移植工作中,尤其是初始阶段，硬件调试器是我们了解目标板真实运行状态的唯一途径。在这方面， W.D 本人和众多嵌入式开发人员倾向于使用 BDI2000。一方面，其价格不如 ICE 调试器昂贵，同时其可靠性高，功能强大，完全能胜任移植和调试 U-Boot。另外，网上也有不少关于 BDI2000调试方面的参考文档。 ⑥ 如果在参考开发板上移植 U-Boot，可能需要移除目标板上已有的 BOOT LOADER。可以根据板上 BOOT LOADER的说明文档，先着手解决在移除当前 BOOT LOADER的情况下，如何进行恢复。以便今后在需要场合能重新装入原先的BOOT LOADER。 U-Boot移植方法当前，对于 U-Boot的移植方法，大致分为两种。一种是先用 BDI2000创建目标板初始运行环境，将 U- Boot镜像文件 u-boot.bin下载到目标板 RAM中的指定位置，然后，用 BDI2000 进行跟踪调试。其好处是不用将 U-Boot 镜像文件烧写到 FLASH 中去。但弊端在于对移植开发人员的移植调试技能要求较高，BDI2000 的配置文件较为复杂。另外一种方法是用 BDI2000先将 U-Boot 镜像文件烧写到 FLASH 中去，然后利用GDB和 BDI2000进行调试。这种方法所用 BDI2000的配置文件较为简单，调试过程与 U-Boot移植后运行过程相吻合，即 U-Boot先从 FLASH 中运行，再重载至 RAM中相应位置，并从那里正式投入运行。唯一感到有些麻烦的就是需要不断烧写 FLASH。但考虑到 FLASH 常规擦写次数基本为 10万次左右，作为移植 U-Boot，不会占用太多的次数，应该不会为 FLASH 烧写有什么担忧。同时， W. D本人也极力推荐使用后一种方法。笔者建议，除非U-Boot移植资深人士或有强有力的技术支持，建议采用第二种移植方法。 U-Boot移植主要修改的文件从移植 U-Boot最小要求－U-Boot能正常启动的角度出发，主要考虑修改如下文件： ① .h头文件，如 include/configs/RPXlite.h。可以是 U-Boot源码中已有的目标板头文件，也可以是新命名的配置头文件；大多数的寄存器参数都是在这一文件中设置完成的； ② .c文件，如board/RPXlite/RPXlite.c。它是SDRAM的驱动程序，主要完成SDRAM Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)的 UPM表设置，上电初始化。 ③ FLASH的驱动程序，如board/RPXlite/flash.c，或common/cfi_flash.c。可在参考已有FLASH 驱动的基础上，结合目标板 FLASH 数据手册，进行适当修改； ④ 串口驱动，如修改cpu/mpc8xx/serial.c串口收发器芯片使能部分。 U-Boot移植要点 ① BDI2000 的配置文件。如果采用第二种移植方法，即先烧入 FLASH 的方法，配置项只需很少几个，就可以进行 U-Boot的烧写与调试了。对 PPC 8xx系列的主板，可参考DULG 文档中 TQM8xx 的配置文件进行相应的修改。下面，笔者以美国 Embedded Planet 公司的 RPXlite DW 板为例，给出在嵌入式Linux交叉开发环境下的 BDI2000参考配置文件以作参考： ; bdiGDB configuration file for RPXlite DW or LITE_DW ; -------------------------------------------- [INIT] ; init core register WSPR 149 0x2002000F ;DER : set debug enable register ; WSPR 149 0x2006000F ;DER : enable SYSIE for BDI flash program WSPR 638 0xFA200000 ;IMMR : internal memory at 0xFA200000 WM32 0xFA200004 0xFFFFFF89 ;SYPCR [TARGET] CPUCLOCK 40000000 ;the CPU clock rate after processing the init list BDIMODE AGENT ;the BDI working mode (LOADONLY | AGENT) BREAKMODE HARD ;SOFT or HARD, HARD uses PPC hardware breakpoints [HOST] IP 173.60.120.5 FILE uImage.litedw FORMAT BIN LOAD MANUAL ;load code MANUAL or AUTO after reset DEBUGPORT 2001 START 0x0100 [FLASH] CHIPTYPE AM29BX8 ;;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16) CHIPSIZE 0x400000 ;;The size of one flash chip in bytes BUSWIDTH 32 ;The width of the flash memory bus in bits (8 | 16 | 32) WORKSPACE 0xFA202000 ; RAM buffer for fast flash programming FILE u-boot.bin ;The file to program FORMAT BIN 0x00000000 ERASE 0x00000000 BLOCK ERASE 0x00008000 BLOCK ERASE 0x00010000 BLOCK Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)ERASE 0x00018000 BLOCK [REGS] DMM1 0xFA200000 FILE reg823.def ② U-Boot 移植参考板。这是进行 U-Boot 移植首先要明确的。可以根据目标板上 CPU、 FLASH、SDRAM的情况，以尽可能相一致为原则，先找出一个与所移植目标板为同一个或同一系列处理器的 U-Boot 支持板为移植参考板。如 RPXlite DW 板可选择 U-Boot 源码中 RPXlite 板作为 U-Boot 移植参考板。对 U-Boot 移植新手，建议依照循序渐进的原则，目标板文件名暂时先用移植参考板的名称，在逐步熟悉 U-Boot 移植基础上，再考虑给目标板重新命名。在实际移植过程中，可用 Linux 命令查找移植参考板的特定代码，如 grep –r RPXlite ./ 可确定出在 U-Boot中与 RPXlite板有关的代码，依此对照目标板实际进行屏蔽或修改。同时应不局限于移植参考板中的代码，要广泛借鉴U-Boot 中已有的代码更好地实现一些具体的功能。 ③ U-Boot烧写地址。不同目标板，对 U-Boot在 FLASH 中存放地址要求不尽相同。事实上，这是由处理器中断复位向量来决定的，与主板硬件相关，对 MPC8xx 主板来讲，就是由硬件配置字(HRCW)决定的。也就是说，U-Boot烧写具体位置是由硬件决定的，而不是程序设计来选择的。程序中相应 U-Boot 起始地址必须与硬件所确定的硬件复位向量相吻合；如 RPXlite DW 板的中断复位向量设置为 0x00000100。因此， U-Boot 的 BIN 镜像文件必须烧写到 FLASH 的起始位置。事实上，大多数的 PPC系列的处理器中断复位向量是 0x00000100 和 0xfff00100。这也是一般所说的高位启动和低位启动的 BOOT LOADER 所在位置。可通过修改 U-Boot 源码.h 头文件中 CFG_MONITOR_BASE 和 board//config.mk中的 TEXT_BASE 的设置来与硬件配置相对应。 ④ CPU寄存器参数设置。根据处理器系列、类型不同，寄存器名称与作用有一定差别。必须根据目标板的实际，进行合理配置。一个较为可行和有效的方法，就是借鉴参考移植板的配置，再根据目标板实际，进行合理修改。这是一个较费功夫和考验耐力的过程，需要仔细对照处理器各寄存器定义、参考设置、目标板实际作出选择并不断测试。MPC8xx处理器较为关键的寄存器设置为 SIUMCR、PLPRCR、SCCR、BRx、ORx。 ⑤ 串口调试。能从串口输出信息，即使是乱码，也可以说 U-Boot移植取得了实质性突破。依据笔者调试经历，串口是否有输出，除了与串口驱动相关外，还与 FLASH 相关的寄存器设置有关。因为 U-Boot 是从 FLASH 中被引导启动的，如果 FLASH 设置不正确，U-Boot 代码读取和执行就会出现一些问题。因此，还需要就FLASH 的相关寄存器设置进行一些参数调试。同时，要注意串口收发芯片相关引脚工作波形。依据笔者调试情况，如果串口无输出或出现乱码，一种可能就是该芯片损坏或工作不正常。 ⑥ 与启动 FLASH 相关的寄存器 BR0、OR0 的参数设置。应根据目标板 FLASH 的数据手册与 BR0 和 OR0 的相关位含义进行合理设置。这不仅关系到 FLASH 能否正常工作，而且与串口调试有直接的关联。 ⑦ 关于 CPLD 电路。目标板上是否有 CPLD 电路丝毫不会影响 U-Boot 的移植与嵌入式操作系统的正常运行。事实上，CPLD 电路是一个集中将板上电路的一些逻辑关系可编程设置 Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)的一种实现方法。其本身所起的作用就是实现一些目标板所需的脉冲信号和电路逻辑，其功能完全可以用一些逻辑电路与 CPU口线来实现。 ⑧ SDRAM的驱动。串口能输出以后，U-Boot移植是否顺利基本取决于 SDRAM的驱动是否正确。与串口调试相比，这部分工作更为核心，难度更大。 MPC8xx 目标板 SDRAM 驱动涉及三部分。一是相关寄存器的设置；二是 UPM表；三是 SDRAM上电初始化过程。任何一部分有问题，都会影响 U- Boot、嵌入式操作系统甚至应用程序的稳定、可靠运行。所以说，SDRAM 的驱动不仅关系到 U-Boot 本身能否正常运行，而且还与后续部分相关，是相当关键的部分。 ⑨ 补充功能的添加。在获得一个能工作的 U-Boot后，就可以根据目标板和实际开发需要，添加一些其它功能支持。如以太网、LCD、NVRAM 等。与串口和 SDRAM 调试相比，在已有基础之上，这些功能添加还是较为容易的。大多只是在参考现有源码的基础上，进行一些修改和配置。另外，如果在自主设计的主板上移植 U-Boot，那么除了考虑上述软件因素以外，还需要排查目标板硬件可能存在的问题。如原理设计、PCB 布线、元件好坏。在移植过程中，敏锐判断出故障态是硬件还是软件问题，往往是关系到项目进度甚至移植成败的关键，相应难度会增加许多。下面以移植 u-boot 到 44B0开发板的步骤为例，移植中上仅需要修改和硬件相关的部分。在代码结构上： 1) 在 board 目录下创建 ev44b0ii 目录，创建 ev44b0ii.c 以及 flash.c,memsetup.S,u-boot.lds 等。不需要从零开始，可选择一个相似的目录，直接复制过来，修改文件名以及内容。我在移植 u-boot 过程中，选择的是 ep7312 目录。由于 u-boot 已经包含基于 s3c24b0 的开发板目录，作为参考，也可以复制相应的目录。 2) 在 cpu 目录下创建 arm7tdmi 目录,主要包含 start.S， interrupts.c 以及 cpu.c,serial.c几个文件。同样不需要从零开始建立文件，直接从arm720t 复制，然后修改相应内容。 3) 在 include/configs 目录下添加 ev44b0ii.h，在这里放上全局的宏定义等。 4) 找到 u-boot 根目录下 Makefile 修改加入 ev44b0ii_config : unconfig @./mkconfig $(@:_config=) arm arm7tdmi ev44b0ii 5) 运行 make ev44bii_config,如果没有错误就可以开始硬件相关代码移植的工作 u-boot 的体系结构 1) 总体结构 u-boot 是一个层次式结构。从上图也可以看出，做移植工作的软件人员应当提供串口驱动 Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)（UART Driver）,以太网驱动(Ethernet Driver),Flash 驱动（Flash 驱动）,USB 驱动（USB Driver）。目前，通过 USB 口下载程序显得不是十分必要，所以暂时没有移植 USB 驱动。驱动层之上是 u-boot 的应用，command 通过串口提供人机界面。我们可以使用一些命令做一些常用的工作，比如内存查看命令 md。 Kermit 应用主要用来支持使用串口通过超级终端下载应用程序。TFTP 则是通过网络方式来下载应用程序，例如uclinux 操作系统。 2) 内存分布在 flash rom 中内存分布图 ev44b0ii 的 flash 大小 2M(8bits),现在将 0-40000 共 256k 作为 u-boot 的存储空间。由于 u-boot 中有一些环境变量，例如 ip 地址，引导文件名等，可在命令行通过 setenv 配置好,通过 saveenv 保存在 40000-50000（共 64k）这段空间里。如果存在保存好的环境变量，u-boot 引导将直接使用这些环境变量。正如从代码分析中可以看到，我们会把 flash 引导代码搬移到 DRAM 中运行。下图给出 u-boot 的代码在 DRAM 中的位置。引导代码 u-boot 将从 0x0000 0000 处搬移到 0x0C700000 处。特别注意的由于 ev44b0ii uclinux 中断向量程序地址在 0x0c00 0000 处，所以不能将程序下载到0x0c00 0000 出，通常下载到 0x0c08 0000 处。 2) start.S 代码结构 1) 定义入口一个可执行的 Image 必须有一个入口点并且只能有一个唯一的全局入口，通常这个入口放在 Rom(flash)的 0x0 地址。例如 start.S 中的 .globl _start _start: 值得注意的是你必须告诉编译器知道这个入口，这个工作主要是修改连接器脚本文件（lds）。 2) 设置异常向量(Exception Vector) 异常向量表，也可称为中断向量表，必须是从 0 地址开始，连续的存放。如下面的就包括了复位(reset),未定义处理（undef）,软件中断(SWI),预去指令错误(Pabort),数据错误 (Dabort), 保留，以及 IRQ,FIQ 等。注意这里的值必须与 uclinux 的 vector_base 一致。这就是说如果 uclinux 中 vector_base(include/armnommu/proc-armv/system.h) 定义为 0x0c00 0000, 则 HandleUndef 应该在 0x0c00 0004。 b reset //for debug ldr pc,=HandleUndef ldr pc,=HandleSWI ldr pc,=HandlePabort ldr pc,=HandleDabort b . ldr pc,=HandleIRQ ldr pc,=HandleFIQ ldr pc,=HandleEINT0 /*mGA H/W interrupt vector table*/ ldr pc,=HandleEINT1 ldr pc,=HandleEINT2 Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)ldr pc,=HandleEINT3 ldr pc,=HandleEINT4567 ldr pc,=HandleTICK /*mGA*/ b . b . ldr pc,=HandleZDMA0 /*mGB*/ ldr pc,=HandleZDMA1 ldr pc,=HandleBDMA0 ldr pc,=HandleBDMA1 ldr pc,=HandleWDT ldr pc,=HandleUERR01 /*mGB*/ b . b . ldr pc,=HandleTIMER0 /*mGC*/ ldr pc,=HandleTIMER1 ldr pc,=HandleTIMER2 ldr pc,=HandleTIMER3 ldr pc,=HandleTIMER4 ldr pc,=HandleTIMER5 /*mGC*/ b . b . ldr pc,=HandleURXD0 /*mGD*/ ldr pc,=HandleURXD1 ldr pc,=HandleIIC ldr pc,=HandleSIO ldr pc,=HandleUTXD0 ldr pc,=HandleUTXD1 /*mGD*/ b . b . ldr pc,=HandleRTC /*mGKA*/ b . b . b . b . b . /*mGKA*/ b . b . ldr pc,=HandleADC /*mGKB*/ b . b . b . b . b . /*mGKB*/ b . Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)b . ldr pc,=EnterPWDN 作为对照：请看以上标记的值： .equ HandleReset, 0xc000000 .equ HandleUndef,0xc000004 .equ HandleSWI, 0xc000008 .equ HandlePabort, 0xc00000c .equ HandleDabort, 0xc000010 .equ HandleReserved, 0xc000014 .equ HandleIRQ, 0xc000018 .equ HandleFIQ, 0xc00001c /*the value is different with an address you think it may be. *IntVectorTable */ .equ HandleADC, 0xc000020 .equ HandleRTC, 0xc000024 .equ HandleUTXD1, 0xc000028 .equ HandleUTXD0, 0xc00002c .equ HandleSIO, 0xc000030 .equ HandleIIC, 0xc000034 .equ HandleURXD1, 0xc000038 .equ HandleURXD0, 0xc00003c .equ HandleTIMER5, 0xc000040 .equ HandleTIMER4, 0xc000044 .equ HandleTIMER3, 0xc000048 .equ HandleTIMER2, 0xc00004c .equ HandleTIMER1, 0xc000050 .equ HandleTIMER0, 0xc000054 .equ HandleUERR01, 0xc000058 .equ HandleWDT, 0xc00005c .equ HandleBDMA1, 0xc000060 .equ HandleBDMA0, 0xc000064 .equ HandleZDMA1, 0xc000068 .equ HandleZDMA0, 0xc00006c .equ HandleTICK, 0xc000070 .equ HandleEINT4567, 0xc000074 .equ HandleEINT3, 0xc000078 .equ HandleEINT2, 0xc00007c .equ HandleEINT1, 0xc000080 .equ HandleEINT0, 0xc000084 3) 初始化 CPU 相关的 pll,clock,中断控制寄存器依次为关闭 watch dog timer,关闭中断，设置 LockTime，PLL(phase lock loop),以及时钟。 Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)这些值（除了LOCKTIME）都可从 Samsung 44b0 的手册中查到。 ldr r0,WTCON //watch dog disable ldr r1,=0x0 str r1,[r0] ldr r0,INTMSK ldr r1,MASKALL //all interrupt disable str r1,[r0] /***************************************************** * Set clock control registers * *****************************************************/ ldr r0,LOCKTIME ldr r1,=800 // count = t_lock * Fin (t_lock=200us, Fin=4MHz) = 800 str r1,[r0] ldr r0,PLLCON /*temporary setting of PLL*/ ldr r1,PLLCON_DAT /*Fin=10MHz,Fout=40MHz or 60MHz*/ str r1,[r0] ldr r0,CLKCON ldr r1,=0x7ff8 //All unit block CLK enable str r1,[r0] 4) 初始化内存控制器内存控制器，主要通过设置 13 个从 1c80000 开始的寄存器来设置，包括总线宽度， 8 个内存 bank，bank 大小，sclk,以及两个 bank mode。 /***************************************************** * Set memory control registers * *****************************************************/ memsetup: adr r0,SMRDATA ldmia r0,{r1-r13} ldr r0,=0x01c80000 //BWSCON Address stmia r0,{r1-r13} 5) 将 rom 中的程序复制到 RAM 中首先利用 PC 取得 bootloader 在 flash 的起始地址，再通过标号之差计算出这个程序代码的大小。这些标号，编译器会在连接（link）的时候生成正确的分布的值。取得正确信息后，通过寄存器(r3 到 r10)做为复制的中间媒介，将代码复制到 RAM 中。 relocate: /* * relocate armboot to RAM */ Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)adr r0, _start /* r0 <- current position of code */ ldr r2, _armboot_start ldr r3, _armboot_end sub r2, r3, r2 /* r2 <- size of armboot */ ldr r1, _TEXT_BASE /* r1 <- destination address */ add r2, r0, r2 /* r2 baudrate) + 0.5) -1 )计算得出。这可以在手册中查到。其他的函数包括发送，接收。这个时候没有中断，是通过循环等待来判断是否动作完成。例如，接收函数： while(!(rUTRSTAT0 & 0x1)); //Receive data read return RdURXH0(); 2. 时钟部分实现了延时函数 udelay。这里的 get_timer 由于没有使用中断，是使用全局变量来累加的。 3. flash 部分 flash 作为内存的一部分，读肯定没有问题，关键是 flash 的写部分。 Flash 的写必须先擦除，然后再写。 unsigned long flash_init (void) { int i; u16 manId,devId; //first we init it as unknown,even if you forget assign it below,it's not a problem for (i=0; i < CFG_MAX_FLASH_BANKS; ++i){ flash_info[i].flash_id = FLASH_UNKNOWN; flash_info[i].sector_count=CFG_MAX_FLASH_SECT; } /*check manId,devId*/ _RESET(); _WR(0x555,0xaa); _WR(0x2aa,0x55); _WR(0x555,0x90); manId=_RD(0x0); _WR(0x555,0xaa); _WR(0x2aa,0x55); _WR(0x555,0x90); Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)devId=_RD(0x1); _RESET(); printf("flashn"); printf("Manufacture ID=%4x(0x0004), Device ID(0x22c4)=%4xn",manId,devId); if(manId!=0x0004 && devId!=0x22c4){ printf("flash check faliluren"); return 0; }else{ for (i=0; i = CFG_FLASH_BASE //onitor protection ON by default flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, CFG_MONITOR_BASE+monitor_flash_len-1, &flash_info[0]); #endif */ flash_info[0].size =PHYS_FLASH_SIZE; return (PHYS_FLASH_SIZE); } flash_init 完成初始化部分，这里的主要目的是检验flash 的型号是否正确。 int flash_erase (flash_info_t *info, int s_first, int s_last) { volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]); int flag, prot, sect, l_sect; //ulong start, now, last; u32 targetAddr; u32 targetSize; /*zyy note:It is required and can't be omitted*/ rNCACHBE0=( (0x2000000>>12)<>12); //flash area(Bank0) must be non-cachable area. rSYSCFG=rSYSCFG & (~0x8); //write buffer has to be off for proper timing. if ((s_first s_last)) { if (info->flash_id == FLASH_UNKNOWN) { printf ("- missingn"); } else { printf ("- no sectors to erasen"); Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)} return 1; } if ((info->flash_id == FLASH_UNKNOWN) || (info->flash_id > FLASH_AMD_COMP)) { printf ("Can't erase unknown flash type - abortedn"); return 1; } prot = 0; for (sect=s_first; sectprotect[sect]) { prot++; } } if (prot) { printf ("- Warning: %d protected sectors will not be erased!n", prot); } else { printf ("n"); } l_sect = -1; /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); /* Start erase on unprotected sectors */ for (sect = s_first; sectprotect[sect] == 0) {/* not protected */ targetAddr=0x10000*sect; if(targetAddr<0x1F0000) targetSize=0x10000; else if(targetAddr<0x1F8000) targetSize=0x8000; else if(targetAddr<0x1FC000) targetSize=0x2000; else targetSize=0x4000; F29LV160_EraseSector(targetAddr); l_sect = sect; if(!BlankCheck(targetAddr, targetSize)) printf("BlankCheck Errorn"); } } /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)/* wait at least 80us - let's wait 1 ms */ udelay (1000); /* *We wait for the last triggered sector */ if (l_sect > 16) & 0xffff; low=swap_16(low); high=swap_16(high); tempPt=(volatile u16 *)dest; _WR(0x555,0xaa); _WR(0x2aa,0x55); _WR(0x555,0xa0); *tempPt=high; Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)_WAIT(); _WR(0x555,0xaa); _WR(0x2aa,0x55); _WR(0x555,0xa0); *(tempPt+1)=low; _WAIT(); return 0; } wirte_word 则想 flash 里面写入 unsigned long 类型的 data，因为flash 一次只能写入16bits，所以这里分两次写入。 Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)u-boot源码分析——启动第一阶段分析代码当然要从上电后执行的第一条指令开始看起咯, 那第一条指令在哪呢？还是以 smdk2410 为例，我们看它的链接脚本：文件 board/smsk2410/u-boot.lds: …… ENTRY(_start) //指明入口地址（见汇编指令） SECTIONS { . = 0x00000000; //入口地址为 0x00000000，硬件决定的 . = ALIGN(4); //按 4 字节对齐，即按字对齐(32 位) .text: //文本段，即代码段 { cpu/arm920t/start.o (.text) //确定启动后执行的第一个文件 *(.text) } . = ALIGN(4); .rodata : { *(.rodata) } …… } 由这个文件可知第一个执行的文件是 cpu/arm920t/start.S，那第一条指令(_start)很可能就在这个文件中了。我们看这个文件： cpu/arm920t/start.S: .globl _start /*这 8 行为中断向量表，参考arm书籍可确定这段代码的编写方法*/ _start: b reset //复位向量，CPU上电后执行的第一条语句 ldr pc, _undefined_instruction ldr pc, _software_interrupt ldr pc, _prefetch_abort ldr pc, _data_abort ldr pc, _not_used ldr pc, _irq //中断向量 ldr pc, _fiq //快速中断向量 /*.word为伪指令，变量替换*/ _undefined_instruction: .word undefined_instruction _software_interrupt: .word software_interrupt Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) _prefetch_abort: .word prefetch_abort _data_abort: .word data_abort _not_used: .word not_used _irq: .word irq _fiq: .word fiq S3C2410的 CPU规定开机后的 PC寄存器地址为 0，即从 0 地址开始执行指令，因此我们必须把我们的复位代码放在 0 地址处才能正常开机。 ARM核也规定启动地址处的 32个字节必须存放异常向量跳转表，里面保存有中断，异常等的处理函数地址。当系统产生中断时，必定会跳到这里来开始处理中断。具体可参考 ARM方面的书籍。由 u-boot.lds可知入口地址为_start，即开机后从_start处开始执行指令。所以第一条指令就是： b reset //跳转到 reset处进行复位处理 cpu/arm920t/start.S: // CPU上电后跳转到此处，CPU进入 SVC32模式，这样可以拥有特权操作，参考 ARM书籍 /* the actual reset code */ reset: mrs r0,cpsr bic r0,r0,#0x1f orr r0,r0,#0xd3 msr cpsr,r0 /* turn off the watchdog */ //CPU上操作 watchdog相关的寄存器地址，可参考CPU的 datasheet,这里用到的地址都是实地址， //因为还没为 MMU等部件进行初始化，也没切换操作模式呢。 #if defined(CONFIG_S3C2400) # define pWTCON 0x15300000 # define INTMSK 0x14400008 /* Interupt-Controller base addresses */ # define CLKDIVN 0x14800014 /* clock divisor register */ #elif defined(CONFIG_S3C2410) # define pWTCON 0x53000000 # define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ # define INTSUBMSK 0x4A00001C # define CLKDIVN 0x4C000014 /* clock divisor register */ #endif #if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) ldr r0, =pWTCON mov r1, #0x0 Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) str r1, [r0] //关闭 watchdog，具体寄存器含义可参考 CPU手册 /* * mask all IRQs by setting all bits in the INTMSK - default */ mov r1, #0xffffffff ldr r0, =INTMSK str r1, [r0] //关闭所有的中断 # if defined(CONFIG_S3C2410) ldr r1, =0x3ff ldr r0, =INTSUBMSK str r1, [r0] //关闭所有的中断 # endif /* FCLK:HCLK:PCLK = 1:2:4 */ /* default FCLK is 120 MHz ! */ //设置 HCLK 为 FCLK/2, PCLK 为 FCLK/4, FCLK 为 CPU产生 clock,HCLK 为 AHB总线上的设备产生 //clock, PCLK 为 APB总线上的设备产生 clock,具体参考 s3c2410的 datasheet ldr r0, =CLKDIVN mov r1, #3 str r1, [r0] #endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ /* * we do sys-critical inits only at reboot, * not when booting from ram! */ //做系统相关的重要初始化，这些初始化代码只在系统重起的时候执行， // CONFIG_SKIP_LOWLEVEL_INIT 可以看 README. #ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit //可以先看这段代码在转回来接着看后面的复位过程。 #endif //内存配置完后，可以进行重定位操作了 #ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* 重定位 u-boot到 RAM中*/ adr r0, _start /* r0 ＝ flash中的代码的起始地址*/ ldr r1, _TEXT_BASE /* r1＝代码在 RAM中的起始地址 */ cmp r0, r1 /* 看是否 u-boot就在 RAM中运行*/ beq stack_setup /*如果在 RAM中则无需重定位*/ /*开始重定位，即把u-boot从 flash中搬到 RAM 中去运行*/ ldr r2, _armboot_start /*r2 = flash中代码的起始地址，看_armboot_start的定义*/ ldr r3, _bss_start /*r3 = bss段的起始地址，_bss_start可在 u-boot.lds中查看。*/ Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) sub r2, r3, r2 /* r2 ＝需要重定位的字节数*/ add r2, r0, r2 /* r2 ＝ flash中 RO,RW 内容的结束地址 */ //开始把代码从 flash中搬运到 RAM中 copy_loop: ldmia r0!, {r3-r10} /*获取从 r0开始的代码,存入 r3—r10*/ stmia r1!, {r3-r10} /*把 r3—r10 的内容存入r1 所在位置，即 RAM中*/ cmp r0, r2 /*copy所有代码 */ ble copy_loop #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ /*设置栈地址*/ stack_setup: ldr r0, _TEXT_BASE /*upper 128 KiB: relocated uboot*/ sub r0, r0, #CFG_MALLOC_LEN /*malloc分配内存的区域，大小以板子的配置而定，smdk2410的在 include/configs/smdk2410.h中定义*/ sub r0, r0, #CFG_GBL_DATA_SIZE /* 存放 bdinfo的区域，定义同上*/ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) //保留中断所需的区域 #endif sub sp, r0, #12 /* 保留 12 字节给 abort-stack，并设好堆栈*/ //bss段内容清 0 clear_bss: ldr r0, _bss_start /* find start of bss segment */ ldr r1, _bss_end /* stop here */ mov r2, #0x00000000 /* clear */ clbss_l:str r2, [r0] /* clear loop... */ add r0, r0, #4 cmp r0, r1 ble clbss_l #if 0 /* try doing this stuff after the relocation */ ldr r0, =pWTCON mov r1, #0x0 str r1, [r0] /* mask all IRQs by setting all bits in the INTMR - default*/ mov r1, #0xffffffff ldr r0, =INTMR str r1, [r0] /* FCLK:HCLK:PCLK = 1:2:4 */ /* default FCLK is 120 MHz ! */ ldr r0, =CLKDIVN mov r1, #3 Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) str r1, [r0] /* END stuff after relocation */ #endif ldr pc, _start_armboot //跳转到_start_armboot处执行。 _start_armboot: .word start_armboot 总结 reset这块代码，主要完成了一下几个部分： 1. 重要部分的初始化工作，如禁止中断，关闭 watchdog，初始化 memory控制器等 2. 重定位boot loader 到 ram 3. 设置好堆栈 4. 跳转到第 2阶段执行完成这些后，此时内存的分布情况如下：这个图代表的是 u-boot自己在内存的情况，和上面的图不一样，这里的_TEXT_BASE 就是 0x33F8’ 0000 接着看 CPU_init_critical cpu/arm920t/start.S: /* ************************************************************************** * CPU_init_critical registers * 设置 cache,TLB,MMU等寄存器 * 设置内存操作的时序 * ************************************************************************* */ cpu_init_crit: /* * flush v4 I/D caches */ /*使 cache和 TLB无效，可以参考 data sheet*/ mov r0, #0 mcr p15, 0, r0, c7, c7, 0 /* 使指令 cache和数据 cache无效 */ mcr p15, 0, r0, c8, c7, 0 /* 使 TLB无效 */ /* * disable MMU stuff and caches */ mrc p15, 0, r0, c1, c0, 0 /*读出 c1 控制寄存器的值*/ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM),小端对齐，关闭数据 cache，关 //闭错误检测，关闭MMU orr r0, r0, #0x00000002 @ set bit 2 (A) Align, 使能错误检测 orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache，使能指令 cache mcr p15, 0, r0, c1, c0, 0 /*设置 c1 控制寄存器*/ /*可以参考 data sheet*/ Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will * find a lowlevel_init.S in your board directory. */ //在把 u-boot 重定位到 RAM 前，我们必须先把 RAM 的时序设置好，内存时序是依板子而定的，所以这里的初始化应该由我们提供,一般在我们的板子所在目录下有个 lowlevel_init.S来负责这件事情。特定板子的目录还记得吗，呵呵回到上面在看看。 mov ip, lr bl lowlevel_init mov lr, ip mov pc, lr //类似于函数返回 cpu_init_crit主要是使能了 instruction cache,关闭了 MMU等部件，但是好像在 u-boot后面的代码里没有看见打开 MMU 的操作，我猜测可能是留到了 OS 启动的时候再打开了吧，data cache 在第二阶段的 board_init下被使能。接着看 lowlevel_init。以 smdk2410位例 board/smdk2410/lowlevel_init.S _TEXT_BASE: .word TEXT_BASE .globl lowlevel_init lowlevel_init: /* memory control configuration */ /* make r0 relative the current location so that it */ /* reads SMRDATA out of FLASH rather than memory ! */ // 内存控制器的配置，配置完后就可以使用内存了 ldr r0, =SMRDATA //在下面定义 ldr r1, _TEXT_BASE sub r0, r0, r1 // ldr r1, =BWSCON /* Bus Width Status Controller */ add r2, r0, #13*4 0: ldr r3, [r0], #4 str r3, [r1], #4 //设置内存配置寄存器，可以对着datasheet来看这里的设置，包括时序位宽等等, 使用一个循环来配置所有的寄存器 cmp r2, r0 bne 0b /* everything is fine now */ mov pc, lr .ltorg /* the literal pools origin */ //这些就是要被设置进内存配置寄存器的值， SMRDATA: Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON< <20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) .word 0x32 .word 0x30 .word 0x30 这部分代码主要是设置 memory的时序，位宽等参数 Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com) U-BOOT源码分析及移植本文从以下几个方面粗浅地分析 u-boot并移植到 FS2410 板上： 1、u-boot工程的总体结构 2、u-boot的流程、主要的数据结构、内存分配。 3、u-boot的重要细节，主要分析流程中各函数的功能。 4、基于 FS2410板子的u-boot移植。实现了 NOR Flash和 NAND Flash启动,网络功能。这些认识源于自己移植 u-boot过程中查找的资料和对源码的简单阅读。下面主要以 smdk2410为分析对象。一、u-boot工程的总体结构： 1、源代码组织对于 ARM而言，主要的目录如下： board 平台依赖存放电路板相关的目录文件,每一套板子对应一个目录。如 smdk2410(arm920t) cpu 平台依赖存放 CPU 相关的目录文件，每一款 CPU 对应一个目录，例如：arm920t、 xscale、i386 等目录 lib_arm 平台依赖存放对 ARM 体系结构通用的文件，主要用于实现 ARM平台通用的函数，如软件浮点。 common 通用通用的多功能函数实现，如环境，命令，控制台相关的函数实现。 include 通用头文件和开发板配置文件，所有开发板的配置文件都在 configs目录下 lib_generic 通用通用库函数的实现 net 通用存放网络协议的程序 drivers 通用通用的设备驱动程序，主要有以太网接口的驱动，nand 驱动。 ....... 2.makefile简要分析所有这些目录的编译连接都是由顶层目录的 makefile 来确定的。在执行 make之前，先

Drag and Drop Component Suite Version 4.1 Field test 5, released 16-dec-2001 ?1997-2001 Angus Johnson & Anders Melander http://www.melander.dk/delphi/dragdrop/ ------------------------------------------- Table of Contents: ------------------------------------------- 1. Supported platforms 2. Installation 3. Getting started 4. Known problems 5. Support and feedback 6. Bug reports 7. Upgrades and bug fixes 8. Missing in this release 9. New in version 4.x 10. TODO 11. Licence, Copyright and Disclaimer 12. Release history ------------------------------------------- 1. Supported platforms: ------------------------------------------- This release supports Delphi 4-6 and C++ Builder 4-5. Earlier versions of Delphi and C++ Builder will not be supported. If you need Delphi 3 or C++ Builder 3 support you will have to revert to version 3.7 of the Drag and Drop Component Suite. The library has been tested on NT4 service pack 5 and Windows 2000. Windows 95, 98, ME and XP should be supported, but has not been tested. Linux and Kylix are not supported. There are *NO* plans to port the library to Kylix. The drag and drop protocols available on Linux are too much of a mess at this time. ------------------------------------------- 2. Installation: ------------------------------------------- 1) Before you do anything else, read the "Known problems" section of this document. 2) Install the source into a directory of your choice. The files are installed into three directories: DragDrop DragDrop\Components DragDrop\Demo 3) Install and compile the appropriate design time package. The design time packages are located in the Components directory. Each version of Delphi and C++ Builder has its own package; DragDropD6.dpk for Delphi 6, DragDropD5.dpk for Delphi 5, DragDropC5.bpk for C++ Builder 5, etc. 4) Add the Drag and Drop Component Suite components directory to your library path. 5) Load the demo project group: demo\dragdrop_delphi.bpg for Delphi 5 and 6 demo\dragdrop_bcb4.bpg for C++ Builder 4 demo\dragdrop_bcb5.bpg for C++ Builder 5 The project group contains all the demo applications. 6) If your version of Delphi does not support text format DFM files (e.g. Delphi 4 doesn't), you will have to use the convert.exe utility supplied with Delphi to convert all the demo form files to binary format. A batch file, convert_forms_to delphi_4_format.bat, is supplied in the demo directory which automates the conversion process. The C++ Builder demo forms are distributed in binary format. 7) If upgrading from a previous version of the Drag and Drop Component Suite, please read the document "upgrading_to_v4.txt" before you begin working on your existing projects. Note about "Property does not exist" errors: Since all demos were developed with the latest version of Delphi, most of the demo forms probably contains references to properties that doesn't exist in earlier versions of Delphi and C++ Builder. Because of this you will get fatal run-time errors (e.g. "Error reading blahblahblah: Property does not exist.") if you attemt to run the demos without fixing this problem. Luckily it is very easy to make the forms work again; Just open the forms in the IDE, then select "Ignore All" when the IDE complains that this or that property doesn't exist and finally save the forms. ------------------------------------------- 3. Getting started: ------------------------------------------- It is recommended that you start by running each of the demo applications and then look through the demo source. Each demo application is supplied with a readme.txt file which briefly describes what the demo does and what features it uses. The demos should be run in the order in which they are listed in the supplied project group. Even if you have used previous versions of the Drag and Drop Component Suite it would be a good idea to have a quick look at the demos. The library has been completely rewritten and a lot of new features has been added. ------------------------------------------- 4. Known problems: ------------------------------------------- * The Shell Extension components does not support C++ Builder 4. For some strange reason the components causes a link error. * There appear to be sporadic problems compiling with C++ Builder 5. Several user have reported that they occasionally get one or more of the following compiler errors: [C++ Error] DragDropFile.hpp(178): E2450 Undefined structure '_FILEDESCRIPTORW' [C++ Error] DropSource.hpp(135): E2076 Overloadable operator expected I have not been able to reproduce these errors, but I believe the following work around will fix the problem: In the project options of *all* projects which uses these components, add the following conditional define: NO_WIN32_LEAN_AND_MEAN The define *must* be made in the project options. It is not sufficient to #define it in the source. If you manage to compile with C++ Builder (any version), I would very much like to know about it. * Delphi's and C++ Builder's HWND and THandle types are not compatible. For this reason it might be nescessary to cast C++ Builder's HWND values to Delphi's THandle type when a HWND is passed to a function. E.g.: if (DragDetectPlus(THandle(MyControl->Handle), Point(X, Y))) { ... } * Virtual File Stream formats can only be pasted from the clipboard with live data (i.e. FlushClipboard/OleFlushClipboard hasn't been called on the data source). This problem affects TFileContentsStreamOnDemandClipboardFormat and the VirtualFileStream demo. This is believed to be a bug in the Windows clipboard and a work around hasn't been found yet. * Asynchronous targets appears to be broken in the current release. * When TDropFileTarget.GetDataOnEnter is set to True, the component doesn't work with WinZip. Although the file names are received correctly by TDropFileTarget, WinZip doesn't extract the files and the files thus can't be copied/moved. This is caused by a quirk in WinZip; Apparently WinZip doesn't like IDataObject.GetData to be called before IDropTarget.Drop is called. ------------------------------------------- 5. Support and feedback: ------------------------------------------- Since these components are freeware they are also unsupported. You are welcome to ask for help via email, but I cannot guarantee that I will have time to help you or even reply to your mail. If you absolytely can't live without my help, you can alway try bribing me. You can also try asking for help in the Delphi newsgroups. Since the Drag and Drop Component Suite is in widespread use, there's a good chance another user can help you. I recommend the following newsgroups for issues regarding this library (or COM based Drag/Drop in general): borland.public.delphi.winapi borland.public.delphi.thirdparty-tools borland.public.delphi.oleautomation borland.public.cppbuilder.winapi borland.public.cppbuilder.thirdparty-tools Please choose the most appropiate newsgroup for your question. Do not cross post to them all. Before posting to the newsgroups, I suggest you try to search for an answer on the Google (DejaNews) search engine: http://groups.google.com Chances are that your question has been asked and answered before. If you have suggestions for improvements please mail them to me: anders@melander.dk Please include the words "Drag Drop" in the subject of any email regarding these components. ------------------------------------------- 6. Bug reports: ------------------------------------------- Bugs can either be reported at my home page (http://www.melander.dk/) or mailed directly to me: anders@melander.dk. When reporting a bug, please provide the following information: * The exact version of the Drag and Drop Component Suite you are using. * The exact version of Delphi or C++ Builder you are using. * The name and exact version of your operating system (e.g. NT4 SP5). * The exact version of the Internet Explorer installed on your system. If you can provide me with a minimal application which reproduces the problem, I can almost guarantee that I will be able to fix the problem in very short time. Please supply only the source files (pas, dfm, dpr, dof, res, etc.) and mail them as a single zip file. If I need a compiled version I will ask for it. If you feel you need to send me a screen shot, please send it in GIF or PNG format. If you mail a bug report to me, please include the words "Drag Drop" in the subject of your email. ------------------------------------------- 7. Upgrades and bug fixes: ------------------------------------------- Upgrades can be downloaded from my home page: http://www.melander.dk/delphi/dragdrop/ Bug fixes will also be posted to the above page. If you have registered for update notification via the installation program, you will receive email notification when a new release is available. You will not be notified of bug fixes. You can use the installation program to check for and download new releases and to check for known bugs. Note: If a new release is made available and you are not notified even though you registered for notification, you probably mistyped your email address during installation; About 10% of all registrations supply an invalid email address. ------------------------------------------- 8. Missing in this release: ------------------------------------------- * On-line help has not been updated and included in the kit due to late changes in the Delphi 6 help system and lack of time. If time permits, I will update the help and include it in a future release. ------------------------------------------- 9. New in version 4.x: ------------------------------------------- * Completely redesigned and rewritten. Previous versions of the Drag and Drop Component Suite used a very monolithic design and flat class hierachy which made it a bit cumbersome to extend the existing components or implement new ones. Version 4 is a complete rewrite and redesign, but still maintains compatibility with previous versions. The new V4 design basically separates the library into three layers: 1) Clipboard format I/O. 2) Data format conversion and storage. 3) COM Drag/Drop implementation and VCL component interface. The clipboard format layer is responsible for reading and writing data in different formats to and from an IDataObject interface. For each different clipboard format version 4 implements a specialized class which knows exactly how to interpret the clipboard format. For example the CF_TEXT (plain text) clipboard format is handled by the TTextClipboardFormat class and the CF_FILE (file names) clipboard format is handled by the TFileClipboardFormat class. The data format layer is primarily used to render the different clipboard formats to and from native Delphi data types. For example the TTextDataFormat class represents all text based clipboard formats (e.g. TTextClipboardFormat) as a string while the TFileDataFormat class represents a list of file names (e.g. TFileClipboardFormat) as a string list. The conversion between different data- and clipboard formats is handled by the same Assign/AssignTo mechanism as the VCLs TPersistent employes. This makes it possible to extend existing data formats with support for new clipboard formats without modification to the existing classes. The drag/drop component layer has several tasks; It implements the actual COM drag/drop functionality (i.e. it implements the IDropSource, IDropTarget and IDataObject interfaces (along with several other related interfaces)), it surfaces the data provided by the data format layer as component properties and it handles the interaction between the whole drag/drop framework and the users code. The suite provides a multitude of different components. Most are specialized for different drag/drop tasks (e.g. the TDropFileTarget and TDropFilesSource components for drag/drop of files), but some are either more generic, handling multiple unrelated formats, or simply helper components which are used to extend the existing components or build new ones. * Support for Delphi 6. Version 4.0 was primarily developed on Delphi 6 and then ported back to previous versions of Delphi and C++ Builder. * Support for Windows 2000 inter application drag images. On Windows platforms which supports it, drag images are now displayed when dragging between applications. Currently only Windows 2000 supports this feature. On platforms which doesn't support the feature, drag images are only displayed whithin the source application. * Support for Windows 2000 asynchronous data transfers. Asynchronous data tranfers allows the drop source and targets to perform slow transfers or to transfer large amounts of data without blocking the user interface while the data is being transfered. For platforms other than Windows 2000, the new TDropSourceThread class can be used to provide similar (but more limited) asynchronous data transfer capabilities. * Support for optimized and non-optimized move. When performing drag-move operations, it is now possible to specify if the target (optimized move) or the source (non-optimized move) is responsible for deleting the source files. * Support for delete-on-paste. When data is cut to the clipboard, it is now possible to defer the deletion of the source data until the target actually pastes the data. The source is notified by an event when the target pastes the data. * Extended clipboard support. All formats and components (both source and target) now support clipboard operations (copy/cut/paste) and the VCL clipboard object. * Support for shell drop handlers. The new TDropHandler component can be used to write drop handler shell extensions. A drop handler is a shell extension which is executed when a user drags and drops one or more files on a file associated wth your application. * Support for shell drag drop handlers. The new TDragDropHandler component can be used to write drag drop handler shell extensions. A drag drop handler is a shell extension which can extend the popup menu which is displayed when a user drag and drops files with the right mouse button. * Support for shell context menu handlers. The new TDropContextMenu component can be used to write context menu handler shell extensions. A context menu handler is a shell extension which can extend the popup menu which is displayed when a user right-clicks a file in the shell. * Drop sources can receive data from drop targets. It is now possible for drop targets to write data back to the drop source. This is used to support optimized-move, delete-on-paste and inter application drag images. * Automatic re-registration of targets when the target window handle is recreated. In previous versions, target controls would loose their ability to accept drops when their window handles were recreated by the VCL (e.g. when changing the border style or docking a form). This is no longer a problem. * Support for run-time definition of custom data formats. You can now add support for new clipboard formats without custom components. * Support for design-time extension of existing source and target components. Using the new TDataFormatAdapter component it is now possible to mix and match data formats and source and target components at design time. E.g. the TDropFileTarget component can be extended with URL support. * It is now possible to completely customize the target auto-scroll feature. Auto scroling can now be completely customized via the OnDragEnter, OnDragOver, OnGetDropEffect and OnScroll events and the public NoScrollZone and published AutoScroll properties. * Multiple target controls per drop target component. In previous versions you had to use one drop target component per target control. With version 4, each drop target component can handle any number of target controls. * It is now possible to specify the target control at design time. A published Target property has been added to the drop target components. * Includes 20 components: - TDropFileSource and TDropFileTarget Used for drag and drop of files. Supports recycle bin and PIDLs. - TDropTextSource and TDropTextTarget Used for drag and drop of text. - TDropBMPSource and TDropBMPTarget Used for drag and drop of bitmaps. - TDropPIDLSource and TDropPIDLTarget Used for drag and drop of PIDLs in native format. - TDropURLSource and TDropURLTarget Used for drag and drop of internet shortcuts. - TDropDummyTarget Used to provide drag/drop cursor feedback for controls which aren't registered as drop targets. - TDropComboTarget (new) Swiss-army-knife target. Accepts text, files, bitmaps, meta files, URLs and file contents. - TDropMetaFileTarget (new) Target which can accept meta files and enhanced meta files. - TDropImageTarget (new) Target which can accept bitmaps, DIBs, meta files and enhanced meta files. - TDragDropHandler (new) Used to implement Drag Drop Handler shell extensions. - TDropHandler (new) Used to implement Shell Drop Handler shell extensions. - TDragDropContext (new) Used to implement Shell Context Menu Handler shell extensions. - TDataFormatAdapter (new) Extends the standard source and target components with support for extra data formats. An alternative to TDropComboTarget. - TDropEmptySource and TDropEmptyTarget (new) Target and source components which doesn't support any formats, but can be extended with TDataFormatAdapter components. * Supports 27 standard clipboard formats: Text formats: - CF_TEXT (plain text) - CF_UNICODETEXT (Unicode text) - CF_OEMTEXT (Text in the OEM characterset) - CF_LOCALE (Locale specification) - 'Rich Text Format' (RTF text) - 'CSV' (Tabular spreadsheet text) File formats: - CF_HDROP (list of file names) - CF_FILEGROUPDESCRIPTOR, CF_FILEGROUPDESCRIPTORW and CF_FILECONTENTS (list of files and their attributes and content). - 'Shell IDList Array' (PIDLs) - 'FileName' and 'FileNameW' (single filename, used for 16 bit compatibility). - 'FileNameMap' and 'FileNameMapW' (used to rename files, usually when dragging from the recycle bin) Image formats: - CF_BITMAP (Windows bitmap) - CF_DIB (Device Independant Bitmap) - CF_METAFILEPICT (Windows MetaFile) - CF_ENHMETAFILE (Enhanced Metafile) - CF_PALETTE (Bitmap palette) Internet formats: - 'UniformResourceLocator' and 'UniformResourceLocatorW' (Internet shortcut) - 'Netscape Bookmark' (Netscape bookmark/URL) - 'Netscape Image Format' (Netscape image/URL) - '+//ISBN 1-887687-00-9::versit::PDI//vCard' (V-Card) - 'HTML Format' (HTML text) - 'Internet Message (rfc822/rfc1522)' (E-mail message in RFC822 format) Misc. formats: - CF_PREFERREDDROPEFFECT and CF_PASTESUCCEEDED (mostly used by clipboard) - CF_PERFORMEDDROPEFFECT and CF_LOGICALPERFORMEDDROPEFFECT (mostly used for optimized-move) - 'InShellDragLoop' (used by Windows shell) - 'TargetCLSID' (Mostly used when dragging to recycle-bin) * New source events: - OnGetData: Fired when the target requests data. - OnSetData: Fired when the target writes data back to the source. - OnPaste: Fired when the target pastes data which the source has placed on the clipboard. - OnAfterDrop: Fired after the drag/drop operation has completed. * New target events: - OnScroll: Fires when the target component is about to perform auto-scroll on the target control. - OnAcceptFormat: Fires when the target component needs to determine if it will accept a given data format. Only surfaced in the TDropComboTarget component. * 8 new demo applications, 19 in total. ------------------------------------------- 10. TODO (may or may not be implemented): ------------------------------------------- * Async target demo (with and without IAsyncOperation support). * Scrap file demo. * Native Outlook message format. * Structured storage support (IStorage encapsulation). ------------------------------------------- 11. Licence, Copyright and Disclaimer: ------------------------------------------- The Drag and Drop Component Suite is Copyright ?1997-2001 Angus Johnson and Anders Melander. All rights reserved. The software is copyrighted as noted above. It may be freely copied, modified, and redistributed, provided that the copyright notice(s) is preserved on all copies. The Drag and Drop Component Suite is freeware and we would like it to remain so. This means that it may not be bundled with commercial libraries or sold as shareware. You are welcome to use it in commercial and shareware applications providing you do not charge for the functionality provided by the Drag and Drop Component Suite. There is no warranty or other guarantee of fitness for this software, it is provided solely "as is". You are welcome to use the source to make your own modified components, and such modified components may be distributed by you or others if you include credits to the original components, and do not charge anything for your modified components. ------------------------------------------- 12. Version 4 release history: ------------------------------------------- 16-dec-2001 * Ported to C++ Builder 4. * Released for test as v4.1 FT5. 12-dec-2001 * Fixed C++ Builder name clash between TDropComboTarget.GetMetaFile and the GetMetaFile #define in wingdi.h 1-dec-2001 * The IAsyncOperation interface is now also declared as IAsyncOperation2 and all references to IAsyncOperation has been replaced with IAsyncOperation2. This was done to work around a bug in C++ Builder. Thanks to Jonathan Arnold for all his help with getting the components to work with C++ Builder. Without Jonathan's help version 4.1 would prabably have shipped witout C++ Builder support and certainly without any C++ Builder demos. * Demo applications for C++ Builder. The C++ Builder demos were contributed by Jonathan Arnold. 27-nov-2001 * TCustomDropTarget.Droptypes property renamed to DropTypes (notice the case). Thanks to Krystian Brazulewicz for spotting this. 24-nov-2001 * The GetURLFromString function in the DragDropInternet unit has been made public due to user request. 21-nov-2001 * Modified MakeHTML function to comply with Microsoft's description of the CF_HTML clipboard format. * Added MakeTextFromHTML function to convert CF_HTML data to plain HTML. Provides the reverse functionality of MakeHTML. * Added HTML support to TTextDataFormat class and TDropTextSource and TDropTextTarget components. * Fixed C++ Builder 5 problem with IAsyncOperation. * Released for test as v4.1 FT4. 10-nov-2001 * Added NetscapeDemo demo application. Demonstrates how to receive messages dropped from Netscape. This demo was sponsored by ThoughtShare Communications Inc. * Released for test as v4.1 FT3. 23-oct-2001 * Conversion priority of TURLDataFormat has been changed to give the File Group Descritor formats priority over the Internet Shortcut format. This resolves a problem where dropping an URL on the desktop would cause the desktop to assume that an Active Desktop item was to be created instead of an Internet Shortcut. Thanks to Allen Martin for reporting this problem. By luck this modification also happens to work around a bug in Mozilla and Netscape 6; Mozilla incorrectly supplies the UniformResourceLocator clipboard format in unicode format instead of ANSI format. Thanks to Florian Kusche for reporting this problem. * Added support for TFileGroupDescritorWClipboardFormat to TURLDataFormat. * Added declaration of FD_PROGRESSUI to DragDropFormats. * Added TURLWClipboardFormat which implements the "UniformResourceLocatorW" (a.k.a. CFSTR_INETURLW) clipboard format. Basically a Unicode version of CFSTR_SHELLURL/CFSTR_INETURL. The TURLWClipboardFormat class isn't used anywhere yet but will probably be supported by TURLDataFormat (and thus TDropURLTarget/TDropURLSource) in a later release. * Added experimental Shell Drag Image support. This relies on undodumented shell32.dll functions and probably won't be fully support before v4.2 (if ever). See InitShellDragImage in DropSource.pas. Thanks to Jim Kueneman for bringning these functions to my attention. 13-oct-2001 * TCustomDropSource.Destroy and TCustomDropMultiSource.Destroy changed to call FlushClipboard instead of EmptyClipboard. This means that clipboard contents will be preserved when the source application/component is terminated. * Added clipboard support to VirtualFileStream demo. * Modified VirtualFileStream demo to work around clipboard quirk with IStream medium. * Modified TCustomSimpleClipboardFormat to disable TYMED_ISTORAGE support by default. At present TYMED_ISTORAGE is only supported for drop targets and enabling it by default in TCustomSimpleClipboardFormat.Create caused a lot of clipboard operations (e.g. copy/paste of text) to fail. Thanks to Michael J Marshall for bringing this problem to my attention. * Modified TCustomSimpleClipboardFormat to read from the the TYMED_ISTREAM medium in small (1Mb) chunks and via a global memory buffer. This has resultet in a huge performance gain (several orders of magnitude) when transferring large amounts of data via the TYMED_ISTREAM medium. 3-oct-2001 * Fixed bug in TCustomDropSource.SetImageIndex. Thanks to Maxim Abramovich for spotting this. * Added missing default property values to TCustomDropSource. Thanks to Maxim Abramovich for spotting this. * DragDrop.pas and DragDropContext.pas updated for Delphi 4. * Reimplemented utility to convert DFM form files from Delphi 5/6 test format to Delphi 4/5 binary format. * Improved unregistration of Shell Extensions. Shell extension now completely (and safely) remove their registry entries when unregistered. * Deprecated support for C++ Builder 3. * Released for test as v4.1 FT2. 25-sep-2001 * Rewritten ContextMenuHandlerShellExt demo. The demo is now actually a quite useful utility which can be used to register and unregister ActiveX controls, COM servers and type libraries. It includes the same functionality as Borland's TRegSvr utility. 20-sep-2001 * Added support for cascading menus, ownerdraw and menu bitmaps to TDropContextMenu component. * Modified TFileContentsStreamOnDemandClipboardFormat to handle invalid parameter value (FormatEtcIn.lindex) when data is copied to clipboard. This works around an apparent bug in the Windows clipboard. Thanks to Steve Moss for reporting this problem. * Modified TEnumFormatEtc class to not enumerate empty clipboard formats. Thanks to Steve Moss for this improvement. 1-sep-2001 * Introduced TCustomDropTarget.AutoRegister property. The AutoRegister property is used to control if drop target controls should be automatically unregistered and reregistered when their window handle is recreated by the VCL. If AutoRegister is True, which is the default, then automatic reregistration will be performed. This property was introduced because the hidden child control, which is used to monitor the drop target control's window handle, can have unwanted side effects on the drop target control (e.g. TToolBar). * Deprecated support for Delphi 3. 22-jun-2001 * Redesigned TTextDataFormat to handle RTF, Unicode, CSV and OEM text without conversion. Moved TTextDataFormat class to DragDropText unit. Added support for TLocaleClipboardFormat. * Surfaced new text formats as properties in TDropTextSource and TDropTextTarget. Previous versions of the Text source and target components represented all supported text formats via the Text property. In order to enable users to handle the different text formats independantly, the text source and target components now has individual properties for ANSI, OEM, Unicode and RTF text formats. The text target component can automatically synthesize some of the formats from the others (e.g. OEM text from ANSI text), but applications which previously relied on all formats being represented by the Text property will have to be modified to handle the new properties. * Added work around for problem where TToolBar as a drop target would display the invisible target proxy window. * Fixed wide string bug in WriteFilesToZeroList. Thanks to Werner Lehmann for spotting this. 15-jun-2001 * Added work-around for Outlook Express IDataObject.QueryGetData quirk. 3-jun-2001 * Ported to C++ Builder 4 and 5. * Added missing DragDropDesign.pas unit to design time packages. * First attempt at C++ Builder 3 port.... failed. * Improved handling of oversized File Group Descriptor data. * Added support for IStorage medium to TFileContentsStreamClipboardFormat. This allows the TDropComboTarget component to accept messages dropped from Microsoft Outlook. This work was sponsored by ThoughtShare Communications Inc. 23-may-2001 * Ported to Delphi 4. * First attempt at C++ Builder 5 port.... failed. 18-may-2001 * Released as version 4.0. Note: Version 4.0 was released exclusively on the Delphi 6 Companion CD. * ContextMenuDemo and DropHandlerDemo application has been partially rewritten and renamed. ContextMenuDemo is now named ContextMenuHandlerShellExt. DropHandlerDemo is now named DropHandlerShellExt. * TDropContextMenu component has been rewitten. The TDropContextMenu now implements a context menu handler shell extension. In previous releases it implemented a drag drop handler shell extension. * The DragDropHandler.pas unit which implements the TDropHandler component has been renamed to DropHandler.pas. * Added new TDragDropHandler component. The new component, which lives in the DragDropHandler unit, is used to implement drag drop handler shell extensions. * Added DragDropHandlerShellExt demo application. * Removed misc incomplete demos from kit. * Fixed minor problem in VirtualFileStream demo which caused drops from the VirtualFile demo not to transfer content correctly. 11-may-2001 * Converted all demo forms to text DFM format. This has been nescessary to maintain compatibility between all supported versions of Delphi. * Fixed a bug in GetPIDLsFromFilenames which caused drag-link of files (dtLink with TDropFileSource) not to work. * Added readme.txt files to some demo applications. * Added missing tlb and C++ Builder files to install kit. * Released as FT4. 6-may-2001 * Added missing dfm files to install kit. * Tested with Delphi 5. Fixed Delphi 5 compatibility error in main.dfm of DragDropDemo. * Removed misc compiler warnings. * The AsyncTransferTarget and OleObjectDemo demos were incomplete and has been removed from the kit for the V4.0 release. The demos will be included in a future release. * Released as FT3. 3-may-2001 * Added missing dpr and bpg files to install kit. * Updated readme.txt with regard to lack of C++ Builder demos. * Released as FT2. 29-apr-2001 * Cleaned up for release. * Released as FT1. 23-feb-2001 * Modified TCustomDropTarget.FindTarget to handle overlapping targets (e.g. different targets at the same position but on different pages of a page control or notebook). Thanks to Roger Moe for spotting this problem. 13-feb-2001 * Renamed AsyncTransfer2 demo to AsyncTransferSource. * Added AsyncTransferTarget demo. * Replaced TChart in AsyncTransfer2 demo with homegrown pie-chart-thing. * Modified all IStream based target formats to support incremental transfer. * URW533 problem has finally been fixed. The cause of the problem, which is a bug in Delphi, was found by Stefan Hoffmeister. * Fixed free notification for TDropContextmenu and TDataFormatAdapter. 27-dec-2000 * Moved TVirtualFileStreamDataFormat and TFileContentsStreamOnDemandClipboardFormat classes from VirtualFileStream demo to DragDropFormats unit. * Added TClipboardFormat.DataFormat and TClipboardFormats.DataFormat property. * Added TDropEmptySource and TDropEmptyTarget components. These are basically do-nothing components for use with TDataFormatAdapter. * Rewritten AsyncTransfer2 demo. The demo now uses TDropEmptySource, TDataFormatAdapter and TVirtualFileStreamDataFormat to transfer 10Mb of data with progress feedback. * Rewritten VirtualFileStream demo. The demo now uses TDropEmptySource, TDropEmptyTarget, TDataFormatAdapter and TVirtualFileStreamDataFormat. * Fixed memory leak in TVirtualFileStreamDataFormat. This leak only affected the old VirtualFileStream demo. * Added support for full File Descriptor attribute set to TVirtualFileStreamDataFormat. It is now possible to specify file attributes such as file size and last modified time in addition to the filename. I plan to add similar features to the other classes which uses FileDescriptors (e.g. TDropFileSource and TDropFileTarget). 21-dec-2000 * Ported to Delphi 4. * Added workaround for design bug in either Explorer or the clipboard. Explorer and the clipboard's requirements to the cursor position of an IStream object are incompatible. Explorer requires the cursor to be at the beginning of stream and the clipboard requires the cursor to be at the end of stream. 15-dec-2000 * Fixed URW533 problem. I'll leave the description of the workaround in here for now in case the problem resurfaces. 11-dec-2000 * Fixed bug in filename to PIDL conversion (GetPIDLsFromFilenames) which affected TDropFileTarget. Thanks to Poul Halgaard J鴕gensen for reporting this. 4-dec-2000 * Added THTMLDataFormat. * Fixed a a few small bugs which affected clipboard operations. * Added {$ALIGN ON} to dragdrop.inc. Apparently COM drag/drop requires some structures to be word alligned. This change fixes problems where some of the demos would suddenly stop working. * The URW533 problem has resurfaced. See the "Known problems" section below. 13-nov-2000 * TCopyPasteDataFormat has been renamed to TFeedbackDataFormat. * Added support for the Windows 2000 "TargetCLSID" format with the TTargetCLSIDClipboardFormat class and the TCustomDropSource.TargetCLSID property. * Added support for the "Logical Performed DropEffect" format with the TLogicalPerformedDropEffectClipboardFormat class. The class is used internally by TCustomDropSource. 30-oct-2000 * Added ContextMenu demo and TDropContextMenu component. Demonstrates how to customize the context menu which is displayed when a file is dragged with the right mouse button and dropped in the shell. * Added TCustomDataFormat.GetData. With the introduction of the GetData method, Data Format classes can now be used stand-alone to extract data from an IDataObject. 20-oct-2000 * Added VirtualFileStream demo. Demonstrates how to use the "File Contents" and "File Group Descritor" clipboard formats to drag and drop virtual files (files which doesn't exist physically) and transfer the data on-demand via a stream. 14-oct-2000 * Added special drop target registration of TCustomRichEdit controls. TCustomRichEdit needs special attention because it implements its own drop target handling which prevents it to work with these components. TCustomDropTarget now disables a rich edit control's built in drag/drop handling when the control is registered as a drop target. * Added work around for Windows bug where IDropTarget.DragOver is called regardless that the drop has been rejected in IDropTarget.DragEnter. 12-oct-2000 * Fixed bug that caused docking to interfere with drop targets. Thanks to G. Bradley MacDonald for bringing the problem to my attention. 30-sep-2000 * The DataFormats property has been made public in the TCustomDropMultiTarget class. * Added VirtualFile demo. Demonstrates how to use the TFileContentsClipboardFormat and TFileGroupDescritorClipboardFormat formats to drag and drop a virtual file (a file which doesn't exist physically). 28-sep-2000 * Improved drop source detection of optimized move. When an optimized move is performed by a drop target, the drop source's Execute method will now return drDropMove. Previously drCancel was returned. The OnAfterDrop event must still be used to determine if a move operation were optimized or not. * Modified TCustomDropTarget.GetPreferredDropEffect to get data from the current IDataObject instead of from the VCL global clipboard. 18-sep-2000 * Fixed bug in DropComboTarget caused by the 17-sep-2000 TStreams modification. 17-sep-2000 * Added AsyncTransfer2 demo to demonstrate use of TDropSourceThread. * Renamed TStreams class to TStreamList. 29-aug-2000 * Added TDropSourceThread. TDropSourceThread is an alternative to Windows 2000 asynchronous data transfers but also works on other platforms than Windows 2000. TDropSourceThread is based on code contributed by E. J. Molendijk. 24-aug-2000 * Added support for Windows 2000 asynchronous data transfers. Added IAsyncOperation implementation to TCustomDropSource. Added TCustomDropSource.AllowAsyncTransfer and AsyncTransfer properties. 5-aug-2000 * Added work around for URW533 compiler bug. * Fixed D4 and D5 packages and updated a few demos. Obsolete DropMultiTarget were still referenced a few places. * Documented work around for C++ Builder 5 compiler error. See the Known Problems section later in this document for more information. 2-aug-2000 * The package files provided in the kit is now design-time only packages. In previous versions, the packages could be used both at design- and run-time. The change was nescessary because the package now contains design-time code. * Added possible work around for suspected C++ Builder bug. The bug manifests itself as a "Overloadable operator expected" compile time error. See the "Known problems" section of this document. * Rewrote CustomFormat1 demo. * Added CustomFormat2 demo. * TDataDirection members has been renamed from ddGet and ddSet to ddRead and ddWrite. * All File Group Descritor and File Contents clipboard formats has been moved from the DragDropFile unit to the DragDropFormats unit. * File Contents support has been added to TTextDataFormat. The support is currently only enabled for drop sources. * Renamed TDropMultiTarget component to TDropComboTarget. Note: This will break applications which uses the TDropMultiTarget component. You can use the following technique to port application from previous releases: 1) Install the new components. 2) Repeat step 3-8 for all units which uses the TDropMultiTarget component. 3) Make a backup of the unit (both pas and dfm file) just in case... 4) Open the unit in the IDE. 5) In the .pas file, replace all occurances of "TDropMultiTarget" with "TDropComboTarget". 6) View the form as text. 7) Replace all occurances of "TDropMultiTarget" with "TDropComboTarget". 8) Save the unit. * Renamed a lot of demo files and directories. * Added work around for yet another bug in TStreamAdapter. * Added TCustomStringClipboardFormat as new base class for TCustomTextClipboardFormat. This changes the class hierachy a bit for classes which previously descended from TCustomTextClipboardFormat: All formats which needs zero termination now descend from TCustomTextClipboardFormat and the rest descend from TCustomStringClipboardFormat. Added TrimZeroes property. Fixed zero termination bug in TCustomTextClipboardFormat and generally improved handling of zero terminated strings. Disabled zero trim in TCustomStringClipboardFormat and enabled it in TCustomTextClipboardFormat. 23-jul-2000 * Improved handling of long file names in DropHandler demo. Added work around for ParamStr bug. * Added TDataFormatAdapter component and adapter demo. TDataFormatAdapter is used to extend the existing source and target components with additional data format support without modifying them. It can be considered an dynamic alternative to the current TDropMultiTarget component. 17-jul-2000 * TDropHandler component and DropHandler demo fully functional. 14-jul-2000 * Tested with C++ Builder 5. * Fixed sporadic integer overflow bug in DragDetectPlus function. * Added shell drop handler support with TDropHandler component. This is a work in progress and is not yet functional. 1-jul-2000 * Tested with Delphi 4. * Support for Windows 2000 inter application drag images. * TRawClipboardFormat and TRawDataFormat classes for support of arbitrary unknown clipboard formats. The classes are used internally in the TCustomDropSource.SetData method to support W2K drag images.

Changes in 2.4.6 (February 22, 2011): Brief summary : - Support more host OS to run on: - Include win64 native binary in the release. - Fixed failures on big endian hosts. - BIOS: Support for up to 2M ROM BIOS images. - GUI: select mouse capture toggle method in .bochsrc. - Ported most of Qemu's 'virtual VFAT' block driver (except runtime write support, but plus FAT32 suppport) - Added write protect option for floppy drives. - Bugfixes / improved internal debugger + instrumentation. Detailed change log : - CPU and internal debugger - Implemented Process Context ID (PCID) feature - Implemented FS/GS BASE access instructions support (according to document from http://software.intel.com/en-us/avx/) - Rewritten from scratch SMC detection algorithm - Implemented fine-grained SMC detection (on 128 byte granularity) - Bugfixes for CPU emulation correctness and stability - Fixed failures on Big Endian hosts ! - Print detailed page walk information and attributes in internal debugger 'page' command - Updated/Fixed instrumentation callbacks - Configure and compile - Bochs now can be compiled as native Windows x86-64 application (tested with Mingw gcc 4.5.1 and Microsoft Visual Studio Express 2010) - Added ability to configure CPUID stepping through .bochsrc. The default stepping value is 3. - Added ability to disable MONITOR/MWAIT support through .bochsrc CPUID option. The option is available only if compiled with --enable-monitor-mwait configure option. - Determine and select max physical address size automatically at configure time: - 32-bit physical address for 386/486 guests - 36-bit physical address for PSE-36 enabled Pentium guest - 40-bit physical address for PAE enabled P6 or later guests - Update config.guess/config.sub scripts to May 2010 revisions. - Update Visual Studio 2008 project files in build/win32/vs2008ex-workspace.zip - Added Bochs compilation timestamp after Bochs version string. - GUI and display libraries (Volker) - Added new .bochsrc option to select mouse capture toggle method. In addition to the default Bochs method using the CTRL key and the middle mouse button there are now the choices: - CTRL+F10 (like DOSBox) - CTRL+ALT (like QEMU) - F12 (replaces win32 'legacyF12' option) - display library 'x' now uses the desktop size for the maximum guest resolution - ROM BIOS - Support for up to 2M ROM BIOS images - I/O Devices - 3 new 'pseudo device' plugins created by plugin separation (see below) - Fixes for emulated DHCP in eth_vnet (patch from @SF tracker) - Added support for VGA graphics mode with 400 lines (partial fix for SF bug #2948724) - NE2K: Fixed "send buffer" command issue on big endian hosts - USB - converted common USB code plus devices to the new 'usb_common' plugin Now the USB device classes no longer exist twice if both HC plugins are loaded. - added 'pseudo device' in common USB code for the device creation. This makes the HCs independent from the device specific code. - USB MSD: added support for disk image modes (like ATA disks) - USB printer: output file creation failure now causes a disconnect - re-implemented "options" parameter for additional options of connected devices (currently only used to set the speed reported by device and to specify an alternative redolog file of USB MSD disk image modes) - hard drive - new disk image mode 'vvfat' - ported the read-only part of Qemu's 'virtual VFAT' block driver - additions: configurable disk geometry, FAT32 support, read MBR and/or boot sector from file, volatile write support using hdimage redolog_t class, optional commit support on Bochs exit, save/restore file attributes, 1.44 MB floppy support, set file modification date/time - converted the complete hdimage stuff to the new 'hdimage' plugin - new hdimage method get_capabilities() that can return special flags - vmware3, vmware4 and vvfat classes now return HDIMAGE_HAS_GEOMETRY flag - other disk image modes by default return HDIMAGE_AUTO_GEOMETRY if cylinder value is set to 0 - multiple sector read/write support for some image modes - new log prefix "IMG" for hdimage messages - floppy - added write protect option for floppy drives (based on @SF patch by Ben Lunt) - vvfat support - bugfix: close images on exit - SB16 - converted the sound output module stuff to the new 'soundmod' plugin - SF patches applied [3164945] hack to compile under WIN64 by Darek Mihocka and Stanislav [3164073] Fine grain SMC invalidation by Stanislav [1539417] write protect for floppy drives by Ben Lunt [2862322] fixes for emulated DHCP in eth_vnet - these S.F. bugs were closed/fixed [2588085] Mouse capture [3140332] typo in mf3/ps2 mapping of BX_KEY_CTRL_R [3111577] No "back" option in log settings [3108422] Timing window in NE2K emulation [3084390] Bochs won't load floppy plugin right on startup [3043174] Docbook use of '_' build failure [3085140] Ia_arpl_Ew_Rw definition of error [3078995] ROL/ROR/SHL/SHR modeling wrong when dest reg is 32 bit [2864794] BX_INSTR_OPCODE in "cpu_loop" causes crash in x86_64 host [2884071] [AIX host] prefetch: EIP [00010000] > CS.limit [0000ffff] [3053542] 64 bit mode: far-jmp instruction is error [3011112] error compile vs2008/2010 with X2APIC [3002017] compile error with vs 2010 [3009767] guest RFLAGS.IF blocks externel interrupt in VMX guest mode [2964655] VMX not enabled in MSR IA32_FEATURE_CONTROL [3005865] IDT show bug [3001637] CMOS MAP register meaning error [2994370] Cannot build with 3DNow support - these S.F. feature requests were closed/implemented [1510142] Native Windows XP x64 Edition binary [1062553] select mouse (de)activation in bochsrc [2930633] legacy mouse capture key : not specific enough [2930679] Let user change mouse capture control key [2803538] Show flags for pages when using "info tab" ------------------------------------------------------------------------- Changes in 2.4.5 (April 25, 2010): Brief summary : - Major configure/cpu rework allowing to enable/disable CPU options at runtime through .bochsrc (Stanislav) - Bugfixes for CPU emulation correctness and stability - Implemented X2APIC extensions (Stanislav) - Implemented Intel VMXx2 extensions (Stanislav) - Extended VMX capability MSRs, APIC Virtualization, X2APIC Virtualization, Extended Page Tables (EPT), VPID, Unrestricted Guests, new VMX controls. - Implemented PCLMULQDQ AES instruction - Extended Bochs internal debugger functionality - USB HP DeskJet 920C printer device emulation (Ben Lunt) Detailed change log : - Configure rework - Deprecate --enable-popcnt configure option. POPCNT instruction will be enabled automatically iff SSE4_2 is supported (like in hardware). - Make --ignore-bad-msrs runtime option in .bochsrc. Old --ignore-bad-msrs configure option is deprecated and should not be used anymore. - Enable changing part of CPU functionality at runtime through .bochsrc. - Now you could enable/disable any of SSEx/AES/MOVBE/SYSENTER_SYSEXIT/XSAVE instruction sets using new CPUID option in .bochsrc. - When x86-64 support is compiled in, you could enable/disable long mode 1G pages support without recompile using new CPUID option in .bochsrc. Configure options: --enable-mmx, --enable-sse, --enable-movbe, --enable-xsave, --enable-sep, --enable-aes, --enable-1g-pages are deprecated and should not be used anymore. - Local APIC configure option --enable-apic is deprecated and should not be used anymore. The LAPIC option now automatically determined from other configure options. XAPIC functionality could be enabled using new CPUID .bochsrc option. - Changed default CPU configuration (generated by configure script with default options) to BX_CPU_LEVEL=6 with SSE2 enabled. - CPU - Implemented PCLMULQDQ AES instruction - Implemented X2APIC extensions / enable extended topology CPUID leaf (0xb), in order to enable X2APIC configure with --enable-x2apic - Implemented Intel VMXx2 extensions: - Enabled extended VMX capability MSRs - Implemented VMX controls for loading/storing of MSR_PAT and MSR_EFER - Enabled/Implemented secondary proc-based vmexec controls: - Implemented APIC virtualization - Implemented Extended Page Tables (EPT) mode - Implemented Descriptor Table Access VMEXIT control - Implemented RDTSCP VMEXIT control - Implemented Virtualize X2APIC mode control - Implemented Virtual Process ID (VPID) - Implemented WBINVD VMEXIT control - Implemented Unrestricted Guest mode In order to enable emulation of VMXx2 extensions configure with --enable-vmx=2 option (x86-64 must be enabled) - Bugfixes for CPU emulation correctness - Fixed Bochs crash when accessing the first byte above emulated memory size - Internal Debugger - Introduced range read/write physical watchpoints - Allow reloading of segment registers from internal debugger - Improved verbose physical memory access tracing - BIOS - Fix MTRR configuration (prevented boot of modern Linux kernels) - Fix interrupt vectors for INT 60h-66h (reserved for user interrupt) by setting them to zero - Fix BIOS INT13 function 08 when the number of cylinders on the disk = 1 - I/O Devices - USB HP DeskJet 920C printer device emulation (Ben Lunt) - Misc - Updated Bochs TESTFORM to version 0.5 - SF patches applied [2864402] outstanding x2apic patches by Stanislav [2960379] Fix build with -Wformat -Werror=format-security by Per Oyvind Karlsen [2938273] allow instrumentation to change execute by Konrad Grochowski [2926072] Indirection operators in expressions by Derek Peschel [2914433] makesym.perl misses symbols by John R. Jackson [2908481] USB Printer by Ben Lunt - these S.F. bugs were closed/fixed [2861662] dbg_xlate_linear2phy needs to be updated [2956217] INT13 AH=8 returns wrong values when cylinders=1 [2981161] Allow DMA transfers to continue when CPU is in HALT state [2795115] NX fault could be missed [2964824] bad newline sequence in aspi-win32.h [913419] configure options and build process needs some work [2938398] gdbstub compile error with x86_64 enabled [2734455] shutdown/reset type 05 should reinit the PICs [1921294] extended memory less than 1M wrong size [1947249] BX_USE_EBDA_TABLES and MP table placement [1933859] BX_USE_EBDA_TABLES and memory overlapping [2923680] "help dregs" is a syntax error [2919661] CPU may fail to do 16bit near call [2790768] Memory corruption with SMP > 32, Panic BIOS Keyboard Error [2902118] interrupts vectors 0x60 to 67 should be NULL ! [2912502] Instruction Pointer behaving erratically [2901047] Bochs crashed, closed by guest os [2905385] Bochs crash [2901481] Instruction SYSRET and SS(PL) [2900632] Broken long mode RETF to outer priviledge with null SS [1429011] Use bx_phyaddr_t for physaddr vars and bx_adress for lin adr - these S.F. feature requests were closed/implemented [2955911] RPM preuninstall scriptlet removes /core [2947863] don't abort on unrecognised options [2878861] numerics in the disassembler output [2900619] make more CPU state changeable ------------------------------------------------------------------------- Changes in 2.4.2 (November 12, 2009): - CPU and internal debugger - VMX: Implemented TPR shadow VMEXIT - Bugfixes for CPU emulation correctness (mostly for VMX support). - Bugfixes and updates for Bochs internal debugger - On SMP system stepN command now affects only current processor - Memory - Bugfixes for > 32-bit physical address space. - Allow to emulate more physical memory than host actually could or would like to allocate. For more details look for new .bochsrc 'memory' option. - Cleanup configure options - All paging related options now will be automatically determined according to --enable-cpu-level option. Related configure options --enable-global-pages, --enable-large-pages, --enable-pae, --enable-mtrr are deprecated now. Only 1G paging option still remaining unchanged. - Deprecate --enable-daz configure option. Denormals-are-zeros MXCSR control will be enabled automatically iff SSE2 is supported (like in hardware). - Deprecate --enable-vme configure option, now it will be supported iff CPU_LEVEL >= 5 (like in hardware). - I/O Devices - Bugfixes for 8254 PIT, VGA, Cirrus-Logic SVGA, USB UCHI - SF patches applied [2817840] Make old_callback static by Mark Marshall [2874004] fix for VMWRITE instruction by Roberto Paleari [2873999] fix CS segment type during fast syscall invocation by Roberto Paleari [2864389] Debugger gui maximize on startup by Thomas Nilsen [2817868] Rework loops in the memory code by Mark Marshall [2812948] PIT bug by Derek - these S.F. bugs were closed/fixed [2833504] GUI debugger bug-about GDT display [2872244] BIOS writes not allowed value to MTRR MSR causing #GP [2885383] SDL GUI memory leak [2872290] compilation in AIX5.3 ML10 failes [2867904] crash with cirrus bx_vga_c::mem_write [2851495] BIOS PCI returns with INT flag = 0 [2860333] vista 64 guest STOP 109 (GDT modification) [2849745] disassembler bug for 3DNow and SSE opcodes [1066748] Wrong registers values after #RESET, #INIT [2836893] Regression: Windows XP installer unable to format harddrive [2812239] VMX: VM-Exit: Incorrect instruction length on software int [2814130] bx_debug lex/yacc files incorrectly generated [2813199] MP Tables Missing From BIOS [2824093] VMX exception bug [2811909] VMX : CS Access-rights Type.Accessed stays 0 [2810571] Compile Errors on OSX [2823749] GCC regression or VM_EXIT RDMSR/WRMSR bug [2815929] Vista/XP64 unnecessary panic [2803519] Wrong example in man page bochsrc - these S.F. feature requests were closed/implemented [422766] Large Memory configurations [1311287] Idea for a better GUI [455971] USB support [615363] debugger shortcut for repeat last cmd ------------------------------------------------------------------------- Changes in 2.4.1 (June 7, 2009): - Fixed bunch of CPUID issues - Bochs is now able to install and boot 64-bit Windows images! (special thanks to Mark Ebersole for his patch) - Several bugfixes in CPU emulation (mostly for x87 instructions) - Fixed two critical deadlock bugs in the Win32 gui (patches from @SF tracker) - Fixes related to the 'show ips' feature - removed conflicting win32-specific alarm() functions ('win32' and 'sdl' gui) - feature now works in wx on win32 - Added support for gdb stub on big endian machine (patch by Godmar Back) - Rewritten obsolete hash_map code in dbg symbols module (patch from @SF) - BIOS: implemented missing INT 15h/89h (patch by Sebastian Herbszt) ------------------------------------------------------------------------- Changes in 2.4 (May 3, 2009): Brief summary : - Added graphical Bochs debugger frontend for most of the supported platforms. - Thanks for Chourdakis Michael and Bruce Ewing. - Many new CPU features in emulation - Support for > 32 bit physical address space and configurable MSRs - VMX, 1G pages in long mode, MOVBE instruction - Bugfixes for CPU emulation correctness, debugger and CPU instrumentation. - New config interface 'win32config' with start and runtime menu - USB: added OHCI support, external hub and cdrom - Added user plugin interface support. Detailed change log : - CPU and internal debugger - Support for VMX hardware emulation in Bochs CPU, to enable configure with --enable-vmx option Nearly complete VMX implementation, with few exceptions: - Dual-monitor treatment of SMIs and SMM not implemented yet - NMI virtualization, APIC virtualization not implemented yet - VMENTER to not-active state not supported yet - No advanced features like Extended Page Tables or VPID - Support for configurable MSR registers emulation, to enable configure with --enable-configurable-msrs option Look for configuration example in .bochsrc and msrs.def - Support new Intel Atom(R) MOVBE instruction, to enable configure with --enable-movbe option - Support for 1G pages in long mode, to enable configure with --enable-1g-pages option - Support for > 32 bit physical address space in CPU. Up to 36 bit could be seen in legacy mode (PAE) and up to 40 bit in x86-64 mode. Still support the same amount of the physical memory in the memory object, so system with > 4Gb of RAM yet cannot be emulated. To enable configure with --enable-long-phy-address option. - Implemented modern BIOSes mode limiting max reported CPUID function to 3 using .bochsrc CPU option. The mode is required in order to correctly install and boot WinNT. - Added ability to configure CPUID vendor/brand strings through .bochsrc (patch from @SF by Doug Reed). - Many bugfixes for CPU emulation correctness (both x86 and x86-64). - Updated CPU instrumentation callbacks. - Fixed Bochs internal debugger breakpoints/watchpoints handling. - Configure and compile - Added ability to choose Bochs log file name and Bochs debugger log file name from Bochs command line (using new -log and -dbglog options) - Removed Peter Tattam's closed source external debugger interface from the code. - Removed --enable-guest2host-tlb configure option. The option is always enabled for any Bochs configuration. - Removed --enable-icache configure option. The option is always enabled for any Bochs configuration. Trace cache support still remains optional and could be configured off. - Added configure option to compile in GUI frontend for Bochs debugger, to enable configure with --enable-debugger-gui option. The GUI debugger frontend is enabled by default with Bochs debugger. - Removed --enable-port-e9-hack configure option. The feature now could be configured at runtime through .bochsrc. - Added configure option to enable/disable A20 pin support. Disabling the A20 pin support slightly speeds up the emulation. - reduced dependencies between source files for faster code generation - BIOS - Added S3 (suspend to RAM) ACPI state to BIOS (patch by Gleb Natapov) - Implemented MTRR support in the bios (patches by Avi Kivity and Alex Williamsion with additions by Sebastian Herbszt) - Bug fixes - I/O Devices - Added user plugin support - remaining devices converted to plugins: pit, ioapic, iodebug - added 'plugin_ctrl' bochsrc option to control the presence of optional device plugins without a separate option. By default all plugins are enabled. - added register mechanism for removable mouse and keyboard devices - Hard drive / cdrom - PACKET-DMA feature now supported by all ATAPI commands - ATAPI command 0x1A added (based on the Qemu implementation) - sb16 - Added ALSA sound support on Linux (PCM/MIDI output) - FM synthesizer now usable with MIDI output (simple piano only) - Fixed OPL frequency to MIDI note translation - Fixed MIDI output command - keyboard - added keyboard controller commands 0xCA and 0xCB - USB - USB code reorganized to support more HC types and devices - added USB OHCI support written by Ben Lunt - added external USB hub support (initial code ported from Qemu) - added USB cdrom support (SCSI layer ported from Qemu) - added status bar indicators to show data transfer - VGA - VBE video memory increased to 16 MB - implemented changeable VBE LFB base address (PCI only, requires latest BIOS and VGABIOS images) - I/O APIC - implemented I/O APIC device hardware reset - Config interface - new config interface 'win32config' with start and runtime menu is now the default on Windows ('textconfig' is still available) - win32 device config dialogs are now created dynamicly from a parameter list (works like the wx ParamDialog) - changes in textcofig and the wx ParamDialog for compatibility with the new win32 dialog behaviour - Bochs param tree index keys are case independent now - some other additions / bugfixes in the simulator interface code - Misc - updated LGPL'd VGABIOS to version 0.6c - Updated Bochs TESTFORM to version 0.4 - SF patches applied [2784858] IO Handler names are not compared properly [2712569] Legacy bios serial data buffer timeout bug by grybranix [2655090] 64 bit BSWAP with REX.W broken by M. Eby [2645919] CR8 bug when reading by M. Eby [1895665] kvm: bios: add support to memory above the pci hole by Izik Eidus [2403372] rombios: check for valid cdrom before using it by Sebastian [2307269] acpi: handle S3 by Sebastian [2354134] TAP networking on Solaris/Sparc repaired [2144692] The scsi device can not complete its writing data command by naiyue [1827082] [PATCH] Configurable CPU vendor by Marcel Sondaar [2217229] Panic on EBDA overflow in rombios32 by Sebastian [2210194] Log pci class code by Sebastian [1984662] red led for disk write and titlebar mod by ggbsf [2142955] Fix for monitor/mwait by Doug Gibson [2137774] Patch to fix bug: cdrom: read_block: lseek returned error by Gabor Olah [2134642] Fix scan_to_scanascii table for F11 and F12 by Ben Guthro & Steve Ofsthun [2123036] sdl fullscreen fix by ggbsf [2073039] Remove CMOS accsess from AML code by Gleb Natapov [2072168] smbios: add L1-L3 cache handle to processor information by Sebastian [2055416] bochsrc cpu options for cpuid vendor and brand string by Doug Reed [2035278] rombios: Fix return from BEV via retf by Sebastian [2035260] rombios: El Torito load segment fix by Sebastian [2031978] Fix VMware backdoor command 0Ah by Jamie Lokier [2015277] Remove obsolete comment about DATA_SEG_DEFS_HERE hack by Sebastian [2011268] Set new default format and unit only if both are supported by Sebastian [2001919] gdbstub: fix qSupported reply by Sebastian [2001912] gdbstub: enclose packet data by apostrophes by Sebastian [1998071] fix missing SIGHUP and SIGQUIT with term ui on mingw by Sebastian [1998063] fix wrong colors with term ui by Sebastian [1995064] Compile fix needed for --enable-debugger and gcc 4.3 by Hans de Goede [1994564] Fix typo in RDMSR BX_MSR_MTRRFIX16K_A0000 by Sebastian [1994396] Change hard_drive_post #if by Sebastian [1993235] TESTFORM email address update by Sebastian [1992322] PATCH: fix compilation of bochs 2.3.7 on bigendian machines by Hans de Goede [1991280] Shutdown status code 0Ch handler by Sebastian [1990108] Shutdown status code 0Bh handler by Sebastian [1988907] Shutdown status code 0Ah handler by Sebastian [1984467] two typos in a release! (2.3.7) [1981505] Init PIIX4 PCI to ISA bridge and IDE by Sebastian - these S.F. bugs were closed/fixed [2784148] an integer overflow BUG of Bochs-2.3.7 source code [2695273] MSVC cpu.dsp failure in 2.3.7.zip [616114] Snapshot/Copy crash on Win2K [2628318] 'VGABIOS-latest' bug [1945055] can't 'make install' lastest bochs on loepard [2031993] Mac OS X Makefile bug [1843199] install error on mac osx [2710931] Problem compiling both instrumentation and debugger [2617003] ExceptionInfo conflicts with OS X api [2609432] stepping causes segfault (CVS) [2605861] compile error with --enable-smp [1757068] current cvs(Jul19, 07) failed to boot smp [2426271] cannot get correct symbol entry [2471982] VGA character height glitches [1659659] wrong behaviour a20 at boot [1998027] minwg + --with-term + --with-out-win32 = link failure [1871936] bochs-2.3.6 make fails on wx.cc [1684666] info idt for long mode [2105989] could not read() hard drive image file at byte 269824 [1173093] Debugger totally not supports x86-64 [1803018] new win32debug dialog problems [2141679] windows vcc build broken [2162824] latest cvs fails to compile [2164506] latest bochs fails to start [2129223] MOV reg16, SS not working in real mode due to dead code [2106514] RIS / startrom.com install ALMOST works [2123358] SMP (HTT): wbinvd executed by CPU1 crashes CPU0 [2002758] Arch Linux: >>PANIC<< ATAPI command with zero byte count [2026501] El Torito incorrect boot segment:offset [2029758] BEV can return via retf instead of int 18h [2010173] x command breaks after one error about x/s or x/i [1830665] harddrv PANIC: ATAPI command with zero byte count [1985387] fail to make using gcc4 with --enable-debugger [1990187] testform feedback [1992138] Misspell in cpu/ia_opcodes.h - these S.F. feature requests were closed/implemented [2175153] Update MSVC project files [658800] front end program and bios [1883370] Make cd and floppy images more usable [422783] change floppy size without restarting [2552685] param tree names should be case insensitive [1214659] PC Speaker emu turnoff. Plugin Controll. [1977045] support 40 bit physical address [1506385] Intel Core Duo VT features [1429015] Support for user plugins [1488136] debugger access to floppy controller [1363136] Full debugger SMP and 64 bit support [2068304] Support for ACPI [431032] debugger "x" command [423420] profiling ideas (SMF) [445342] Add FM support? [928439] alsa ------------------------------------------------------------------------- Changes in 2.3.7 (June 3, 2008): Brief summary : + More optimizations in CPU code - Bochs 2.3.7 is more than 2x faster than Bochs 2.3.5 build ! - Implemented LBA48 support in BIOS - Added memory access tracing for Bochs internal debugger - Implemented Intel(R) XSAVE/XRSTOR and AES instruction set extensions - Many fixes in CPU emulation and internal debugger - MenuetOS64 floppy images booting perfect again ! - updated LGPL'd VGABIOS to version 0.6b Detailed change log : - CPU - Support of XSAVE/XRSTOR CPU extensions, to enable configure with --enable-xsave option - Support of AES CPU extensions, to enable configure with --enable-aes option - Fixed Bochs failure on RISC host machines with BxRepeatSpeedups optimization enabled - Implemented SYSENTER/SYSEXIT instructions in long mode - More than 100 bugfixes for CPU emulation correctness (both x86 and x86-64) - MenuetOS64 floppy images booting perfect again ! - Updated CPU instrumentation callbacks - Bochs Internal Debugger and Disassembler - Added memory access tracing for Bochs internal debugger, enable by typing 'trace-mem on' in debugger command line - Many bug fixes in Bochs internal debugger and disassembler - System BIOS (Volker) - Implemented LBA48 support - Added generation of SSDT ACPI table that contains definitions for available processors - Added RTC device to ACPI DSDT table - Added implementation of SMBIOS - I/O devices (Volker) - VGA - Implemented screen disable bit in sequencer register #1 - Implemented text mode cursor blinking - Serial - new serial modes 'pipe-server' and 'pipe-client' for win32 - new serial mode 'socket-server' - Configure and compile - Fixed configure bug with enabling of POPCNT instruction, POPCNT instruction should be enabled by default when SSE4.2 is enabled. - Removed --enable-magic-breakpoint configure option. The option is automatically enabled if Bochs internal debugger is compiled in. It is still possible to turn on/off the feature through .bochsrc. - Allow boot from network option in .bochsrc - Added Bochs version info for Win32 - Display libraries - implemented text mode character blinking in some guis - improved 'X' gui runtime dialogs - SF patches applied [1980833] Fix shutdown status code 5h handler by Kevin O'Connor [1928848] "pipe" mode for serial port (win32 only) by Eugene Toder [1956843] Set the compatible pci interrupt router back to PIIX by Sebastian [1956366] Do not announce C2 & C3 cpu power state support by Igor Lvovsky [1921733] support for LBA48 by Robert Millan [1938185] Fix link problem with --enable-debugger by Sebastian [1938182] Makefile.in - use @IODEV_LIB_VAR@ by Sebastian [1928945] fix for legacy rombios - e820 map and ACPI_DATA_SIZE by Sebastian [1925578] rombios32.c - fix ram_size in ram_probe for low memory setup by Sebastian [1908921] rombios32.c - move uuid_probe() call by Sebastian [1928902] improvements to load-symbols by Eugene Toder [1925568] PATCH: msvc compilation by Eugene Toder [1913150] rombios.c - e820 cover full size if memory <= 16 mb by Alexander van Heukelum [1919804] rombios.c - fix and add #ifdef comments by Sebastian [1909782] rombios.c - remove segment values from comment by Sebastian [1908918] SMBIOS - BIOS characteristics fix by Sebastian [1901027] BIOS boot menu support (take 3) [1902579] rombios32.c - define pci ids by Sebastian [1859447] Pass segment:offset to put_str and introduce %S by Sebastian [1889057] rombios.c - boot failure message by Sebastian [1891469] rombios.c - print BEV product string by Sebastian [1889851] Win32 version information FILEVERSION for bochs.exe by Sebastian [1889042] rombios.c - fix comment by Sebastian [1881500] bochsrc, allow boot: network by Sebastian [1880755] Win32 version information for bochs.exe by Sebastian [1880471] SMBIOS fix type 0 by Sebastian [1878558] SMBIOS fixes by Sebastian [1864692] SMBIOS support by Filip Navara [1865105] Move bios_table_area_end to 0xcc00 by Sebastian [1875414] Makefile.in - change make use by Sebastian [1874276] Added instrumentation for sysenter/sysexit by Lluis [1873221] TLB page flush: add logical address to instrumentation by Lluis [1830626] lba32 support by Samuel Thibault [1861839] Move option rom scan after floppy and hard drive post by Sebastian [1838283] Early vga bios init by Sebastian [1838272] rom_scan range parameter by Sebastian [1864680] Save CPUID signature by Filip Navara - these S.F. bugs were closed [1976171] Keyboard missing break code for enter (0x9C) [666433] physical read/write breakpoint sometimes fails [1744820] info gdt and info idt shows the entire tables [1755652] graphics: MenuetOS64 shows black screen [1782207] Windows Installer malfunction, Host=Linux, Guest=Win98SE [1697762] OS/2 Warp Install Failed [1952548] String to char * warnings [1940714] SYSENTER/SYSEXIT doesn't work in long mode [1422342] SYSRET errors [1923803] legacy rombios - e820 map and ACPI_DATA_SIZE [1936132] Link problem with --enable-debugger & --enable-disasm [1934477] Linear address wrap is not working [1424984] virtual machine freezes in Bochs 2.2.6 [1902928] with debugger cpu_loop leaves CPU with unstable state [1898929] Bochs VESA BIOS violates specs (banks == 1) [1569256] bug in datasegment change in long mode [1830662] ACPI: no DMI BIOS year, acpi=force is required [1868806] VGA blink enable & screen disable [1875721] Bit "Accessed" in LDT/GDT descriptors & #PF [1874124] bx_Instruction_c::ilen() const [1873488] bochs-2.3.6 make fails on dbg_main.cc - these S.F. feature requests were implemented [1422769] SYSENTER/SYSEXIT support in x86-64 mode [1847955] Version information for bochs(dbg).exe [939797] SMBIOS support ------------------------------------------------------------------------- Changes in 2.3.6 (December 24, 2007): Brief summary : + More than 25% emulation speedup vs Bochs 2.3.5 release! - Thanks to Darek Mihocka (http://www.emulators.com) for providing patches and ideas that made the speedup possible! + Up to 40% speedup vs Bochs 2.3.5 release with trace cache optimization! - Lots of bugfixes in CPU emulation - Bochs benchmarking support - Added emulation of Intel SSE4.2 instruction set Detailed change log : - CPU - Added emulation of SSE4.2 instruction set, to enable use --enable-sse=4 --enable-sse-extension configure options to enable POPCNT instruction only use configure option --enable-popcnt - Implemented MTRR emulation, to enable use --enable-mtrr configure option. MTRRs is enabled by default when cpu-level >= 6. - Implemented experimental MONITOR/MWAIT support including optimized MWAIT CPU state and hardware monitoring of physical address range, to enable use --enable-monitor-mwait configure option. - Removed hostasm optimizations, after Bochs rebenchmarking it was found that the feature bringing no speedup or even sometimes slows down emulation! - Merged trace cache optimization patch, the trace cache optimization is enabled by default when configure with --enable-all-optimizations option, to disable trace cache optimization configure with --disable-trace-cache - Many minor bugfixes in CPU emulation (both ia32 and x86-64) - Updated CPU instrumentation callbacks - Bochs Internal Debugger and Disassembler - Many fixes in Bochs internal debugger and disassembler, some debugger interfaces significantly changed due transition to the param tree architecture - Added support for restoring of the CPU state from external file directly from Bochs debugger - Configure and compile - Renamed configure option --enable-4meg-pages to --enable-large-pages. The option enables page size extensions (PSE) which refers to 2M pages as well. - Removed --enable-save-restore configure option, save/restore feature changed to be one of the basic Bochs features and compiled by default for all configurations. - Added new Bochs benchmark mode. To run Bochs in benchmark mode execute it with new command line option 'bochs -benchmark time'. The emulation will be automatically stopped after 'time' millions of emulation cycles executed. - Another very useful option for benchmarking of Bochs could be enabled using new 'print_timestamps' directive from .bochsrc: print_timestamps: enable=1 - Added --enable-show-ips option to all configuration scripts used to build release binaries, so all future releases will enjoy IPS display. - Enable alignment check in the CPU and #AC exception by default for --cpu-level >= 4 (like in real hardware) - SF patches applied [1491207] Trace Cache Speedup patch by Stanislav [1857149] Define some IPL values by Sebastian [1850183] Get memory access mode in BX_INSTR_LIN_READ by Lluis Vilanova [1841421] pic: keep slave_pic.INT and master_pic.IRQ_in bit 2 in sync by Russ Cox [1841420] give segment numbers in exception logs by Russ Cox [1801696] Allow Intel builds on Mac OS X [1830658] Fix >32GB disk banner by Samuel Thibault [1813314] Move #define IPL_* and typedef ipl_entry by Sebastian [1809001] Save PnP Option ROM Product Name string in IPL Boot Table by Sebastian [1821242] Fix for #1801285, Niclist.exe broken by Sebastian [1819567] Code warning cleanup [1816162] Update comment on bios_printf() by Sebastian [1811139] Trivial Fix when BX_PCIBIOS and BX_ROMBIOS32 not defined by Myles Watson [1811190] Improve HD recognition and CD boot by Myles Watson [1811860] Implement %X in bios_printf by Sebastian [1809649] printf %lx %ld %lu by Myles Watson [1809651] move BX_SUPPORT_FLOPPY by Myles Watson [1809652] dpte and Int13DPT fixes by Myles Watson [1809669] clip cylinders to 16383 in hard drive by Myles Watson [1799903] Build BIOS on amd64 by Robert Millan [1799877] Fix for parallel build (make -j2) by Robert Millan - these S.F. bugs were closed [1837354] website bug: View the Source link broken [1801268] Reset from real mode no longer working [1843250] Using forward slashes gives invalid filename [1823446] BIOS bug, local APIC #0 not detected [1801285] Niclist.exe broken [1364472] breakpoints sometimes don't work [994451] breakpoint bug [1801295] NSIS installer vs Windows Notepad [1715328] Unreal mode quirk [1503972] debugger doesn't debug first instruction on exception [1069071] div al, byte ptr [ds:0x7c18] fails to execute [1800080] Wrong "BX_MAX_SMP_THREADS_SUPPORTED" assertion - these S.F. feature requests were implemented [1662687] Download for Win32-exe with x64 Mode and debugging [604221] Debugger command: query lin->phys mapping ------------------------------------------------------------------------- Changes in 2.3.5 (September 16, 2007): Brief summary : - Critical problems fixed for x86-64 support in CPU and Bochs internal debugger - ACPI support - The release compiled with x86-64 and ACPI - Hard disk emulation supports ATA-6 (LBA48 addressing, UDMA modes) - Added emulation of Intel SSE4.1 instruction set Detailed change log : - CPU - Fixed critical bug with 0x90 opcode (NOP) handling in x86-64 mode - implied stack references where the stack address is not in canonical form should causes a stack exception (#SS) - Added emulation of SSE4.1 instruction set (Stanislav) - Do not save and restore XMM8-XMM15 registers when not in x86-64 mode - Fixed zero upper 32-bit part of GPR in x86-64 mode - CMOV_GdEd should zero upper 32-bit part of GPR register even if the 'cmov' condition was false ! - Implemented CLFLUSH instruction, report non-zero cache size in CPUID - Fixed PUSHA/POPA instructions behavior in real mode - Fixed detection of inexact result by FPU - Fixed denormals-are-zero (DAZ) handling by SSE convert instructions - Implemented Misaligned Exception Mask support for SSE (MXCSR[17]) - Implemented Alignment Check in the CPU and #AC exception, to enable use --enable-alignment-check configure option - General - 2nd simulation support in wxBochs now almost usable (simulation cleanup code added and memory leaks fixed) - Configure and compile - several fixes for MacOSX, OpenBSD and Solaris 10 - enable save/restore feature by default for all configurations - reorganized SSE configure options to match Intel(R) Programming Reference Manual, new option introduced for SSE extensions enabling. To enable Intel Core Duo 2 new instructions use --enable-sse=3 --enable-sse-extension enabling of SSE4.1 (--enable-sse=4) will enable SSE3 extensions as well - removed old PIT, always use new PIT written by Greg Alexander, removed configure option --enable-new-pit - I/O devices (Volker) - Floppy - partial non-DMA mode support (patch by John Comeau) - Hard drive / cdrom - hard disk emulation now supports ATA-6 (LBA48 addressing, UDMA modes) - VMWare version 4 disk image support added (patch by Sharvil Nanavati) - PCI - initial support for the PIIX4 ACPI controller - Serial - added support for 3-button mouse with Mousesystems protocol - USB - experimental USB device change support added - rewrite of the existing USB devices code - new USB devices 'disk' and 'tablet' (ported from the Qemu project) - Bochs internal debugger - fixed broken debugger "rc file" option (execute debugger command from file) - implementation of a gui frontend ("windebug") for win32 started - gdbstub now accepts connection from any host - several documentation updates - a lot of disasm and internal debugger x86_64 support fixes - Configuration interface - fixes and improvements to the save state dialog handling - Display libraries - text mode color handling improved in some guis - win32 fullscreen mode (patch by John Comeau) - System BIOS (Volker) - 32-bit PM BIOS init code for ACPI, PCI, SMP and SMM (initial patches by Fabrice Bellard) - PCI BIOS function "find class code" implemented - SF patches applied [1791000] 15h 8600h is reading the wrong stack frame by Sebastian [1791016] rombios32.c, ram_probe(), BX_INFO missing value by Sebastian [1786429] typo in bochsrc.5 by Sebastian [1785204] Extend acpi_build_table_header to accept a revision number by Sebastian [1766536] Partial Patch for Bug Report 1549873 by Ben Lunt [1763578] ACPI Table Revision 0 -> 1 [1642490] implement alignment check and #AC exception by Stanislav Shwartsman [1695652] [PATCH] .pcap pktlog and vnet PXE boot by Duane Voth [1741153] Add expansion-ROM boot support to the ROMBIOS [1734159] Implemented INT15h, fn 0xC2 (mouse), subfn 3, set resolution [1712970] bios_printf %s fix [1573297] PUSHA/POPA real mode fix by Stanislav Shwartsman [1641816] partial support for non-DMA access to floppy by John Comeau [1624032] shows where write outside of memory occurred by John Comeau [1607793] allow fullscreen when app requests it by John Comeau [1603013] Bugfix for major NOP problem on x64 by mvysin [1600178] Make tap and tuntap compile on OpenBSD by Jonathan Gray [1149659] improve gdbstub network efficiency by Avi Kivity [1554502] Trivial FPU exception handling fix - these S.F. bugs were closed [1316008] Double faults when it shouldn't - gcc 4.0.2 [1787289] broken ABI for redolog class when enable-compressed-hd [1787500] tftp_send_optack not 64bit clean [1264540] Security issue with Bochs website [1767217] Debugger Faults including ud2 [1729822] Various security issues in io device emulation [1675202] mptable hosed (bad entry count in header) [1197141] 'make install' installs to bad location [1157623] x86Solaris10 cannot recoginize ACPI RSD PTR [1768254] large HDD in Bochs/bximage [1496157] Windows Vista Beta2 dosn't boot [1755915] Illegal Hard Disk Signature Output [1717790] info gdt and info idt scrolls away, too long result [1726640] Debugger displays incorrect segment for mov instruction [1719156] Typo in misc_mem.cpp [1715270] Debugger broken in/beyond 2.3 [1689107] v8086 mode priviledge check failed [1704484] A few checks when CPU_LEVEL < 4 [1678395] Problem with zero sector... [876990] SA-RTL OS fails on PIC configuration [1673582] save/restore didn't restore simulation correctly [1586662] EDD int 13h bug, modify eax [666618] POP_A Panic in DOS EMU [1001485] panic: not enough bytes on stack [1667336] delay times an order of magnitude slow [1665601] crash disassembling bootcode [1657065] CVS sources won't compile [1653805] bochs's gdbstub uses incorrect protocol [1640737] ASM sti command frezzes guest OS [1636439] latest CVS sources don't compile under Cygwin [1634357] disasm incorrect (no sign ext) displacement in 64-bit mode [1376453] pcidev segfaults bochs [1180890] IOAPIC in BOCHS - WinXP 64 in MP version [1597528] 2.3 fails to compile on amd64 [1526255] FLD1 broken when compaling with gcc 4.0.x [1597451] eth_fbsd is broken under FreeBSD [1571949] Bochs will not compile under Solaris [1500216] Bochs fails to boot BeOs CD [1458339] bochs-2.2.6 WinXP Binary ACPI error installing FreeBSD 6.0 [1440011] patches needed for FreeBSD 6.0 to compile Bochs [431674] some devices don't have a prefix [458150] QNX demo disk crashes with new pit [818322] Bochs 2.1 cvs: OS/2 - read verify on non disk [906840] KBD: bogus scan codes generated in set 3 [1005053] No keyboard codes translation [1109374] Problem with Scancodeset 2 [1572345] Bochs won't continue [1568153] Bochs looks for (and loads?) unspecified display libraries [1563462] Errors in /iodev/harddrv.h [1562172] TLB_init() fails to initialize priv_check array if USE_TLB 0 [1385303] debugger crashes after panic [1438227] crc.cpp missing in bx_debug version 2.2.6 [1501825] debugger crashes on to high input [1420959] Memory leak + buffer overflow in Bochs debugger [1553289] Error in Dis-assembler [542464] I cannot use FLAT [1548270] Bochs won't die with its pseudo terminal [1545588] roundAndPackFloatx80 does not detect round up correctly ------------------------------------------------------------------------- Changes in 2.3 (August 27, 2006): Brief summary : - limited save/restore support added (config + log options, hardware state) - configuration parameter handling rewritten to a parameter tree - lots of cpu and internal debugger fixes - hard disk geometry autodetection now supported by most of the image types - hard disk emulation now supports ATA-3 (multiple sector transfers) - VBE memory size increased to 8MB and several VGA/VBE fixes - updated LGPL'd VGABIOS to version 0.6a Detailed change log : - CPU and internal debugger fixes - Fixed bug in FSTENV instruction (Stanislav Shwartsman) - Recognize #XF exception (19) when SSE is enabled - Fixed bug in PSRAW/PSRAD MMX and SSE instructions - Save and restore RIP/RSP only for FAULT-type exceptions, not for traps - Correctly decode, disassemble and execute multi-byte NOP '0F F1' opcode - Raise A20 line after system reset (Stanislav Shwartsman) - Implemented SMI and NMI delivery (APIC) and handling in CPU (Stanislav) - Experimental implementation of System Management Mode (Stanislav) - Added emulation of SSE3E instructions (Stanislav Shwarstman) - Save and restore FPU opcode, FIP and FDP in FXSAVE/FRSTOR instructions - Fixed bug in MOVD_EdVd opcode (always generated #UD exception) - Fixed critical issue, Bochs was not supporting > 16 bit LDT.LIMIT values - Many fixes in Bochs internal debugger and disassembler - CPU x86-64 fixes - Fixed SYSRET instruction implementation - Fixed bug in CALL/JMP far through 64-bit callgate in x86-64 mode - Correctly decode, disassemble and execute 'XCHG R8, rAX' instruction - Correctly decode and execute 'BSWAP R8-R15' instructions - Fixed ENTER and LEAVE instructions in x86-64 mode (Stanislav) - Fixed CR4 exception condition (No Name) - Fixed x86 debugger to support x86-64 mode (Stanislav) - APIC and SMP - Support for Dual Core and Intel(R) HyperThreading Technology. Now you could choose amount of cores per processor and amount of HT threads per core from .bochsrc for SMP simulation (Stanislav Shwartsman) - Allow to control SMP quantum value through .bochsrc CPU option parameter. Previous Bochs versions used hardcoded quantum=5 value. - Fixed interrupt priority bug in service_local_apic() - Fixed again reading of APIC IRR/ISR/TMR registers. Finally it becomes fully correct :-) - Configure and compile - Moved configure time --enable-reset-on-triple-fault option to runtime, the 'cpu' option in .bochsrc is extended and the old configure option is deprecated (Stanislav Shwartsman) - Removed --enable-pni configure option, to compile with PNI use --enable-sse=3 instead (Stanislav Shwartsman) - enable SEP (SYSENTER/SYSEXIT) support by default for Penitum II+ processor emulation (i.e. if cpu-level >= 6 and MMX is enabled) - general - Limited save/restore support added. The state of CPU, memory and all devices can be saved now (state of harddisk images not handled yet). - Fixed several memory leaks - configuration interface - Configuration parameter handling rewritten to a parameter tree. This is required for dynamic menus/dialogs, user-defined options and save/restore. - Support for user-defined bochsrc options added - help support at the parameter prompt in textconfig added - I/O devices (Volker) - Floppy - partial sector transfers fixed - Hard drive / cdrom - several fixes to the IDE register behaviour (e.g. in case of a channel with only one drive connected) - fixed data alignment of 'growing' hard drive images (sharing images between Windows and Linux now possible) - disk geometry autodetection now supported by most of the image types (unsupported: external, dll and compressed modes) - multi sector read/write commands implemented - hard disk now reporting ATA-3 supported - ATAPI 'inquiry' now returns a unique device name - Keyboard - reset sent to keyboard has no effect on the 8042 (scancode translation) - PCI - forward PIRQ register changes to the I/O APIC (if present) - attempt to fix and update the emulation part of 'pcidev' (untested) - VGA - VBE memory size increased to 8MB and several VBE fixes - VGA memory read access fixed (bit plane access and read mode) - VGA memory is now a part of the common video memory - System BIOS (Volker) - enable interrupts before executing INT 19h - fixed ATA device detection in case of one drive only connected to controller - improved INT 15h function AX=E820h - real mode PCI BIOS now returns IRQ routing information (function 0Eh) - keyboard LED flags handling fixed and improved - fixed handling of extended keys in INT 09h - Updated LGPL'd VGABIOS to version 0.6a - SF patches applied [1340111] fixes and updates to usb support by Ben Lunt [1539420] minor addition to pci_usb code by Ben Lunt [1455958] call/jmp through call gate in 64-bit mode [1433107] PATCH: fix compile with wxwindows 2.6 (unicode / utf8) by jwrdegoede [1386671] Combined dual core and hyper-threading patch - these S.F. bugs were closed [833927] TTD: System Error TNT.40025: Unexpected processor exception [789230] Sending code that shows lock up when setting idt [909670] Problems with Symantec Ghost [1540241] include missing in osdep.cc [1539373] Incorrect disasm for "mov moffset,bla" in 64bit [1538419] incorrect disassembly of [rip+disp] with rex.b [1535432] shift+cursor key maps to a digit [1504891] Knoopix 5.0.1 error [1424355] bochs-2.2.6 ata failure in windoze 98se [1533979] wrong disassembly of IN instruction [620059] paste won't stop [1164904] status bar doesn't show num/caps/scroll lock status [1061720] ATA Support level for HD [1522196] Broken CHANGES link in main page [1438415] crash if screen scrolled downwards [778441] Shouldn't interrupts be enable after BIOS? [1514949] I got a problem with the 8253 timer [1513544] disasm of 0xec (in AL,DX) returns ilen of 2 instead of 1 [1508947] APIC interrupt priority checking and interrupt delivery [766286] Debugger halts after any GPF exception [639143] va_list is not a pointer on linuxppc [1501815] debugger examines memory over page-boundary wrong [1503978] movsb/w/d doesn't work when direction is stored [1499405] WinPCap has changed URL hosting [1498519] APIC IRR bits not set while interrupts disabled [1498193] Bochs segfaults on LTR instruction [787140] Guest2HostTLB optimization bug [1492070] instrument stop [1487772] No SEP on P4 [1488335] Growing hard disk images severe interoperability errors! [1076312] Shadow RAM and TLB [1282249] The real i440FX chipset Award bios hangs [1479763] mistake "mov ax,[es:di]" for "mov ax,[ds:di]" [1453575] Misconfigured floppy DMA transfers do not terminate. [1460068] Incorrect handling for the Options Menu Item [910203] bochs-2.1.1 wx.lo failed [1438654] PANIC when trying to run install-amd64-minimal-2005.0.iso [1458320] compile hdimage.h fails [1455880] bochs-2.2.6,2: make error on FreeBSD [696890] Network wouldn't run under W2k hosting MSDOS [673391] SMP timer problems [1291059] wxWindows GUI on non-windows/configure issue [1356450] bochs 2.2.1 errors-omittions [1178017] Win98 guest cannot receive network packets from host [1076315] a20_mask after restarting [1436323] real hw does not panic when bad Ib in CMPSS_VssWssIb [1435269] cdrom_amigaos is not compilable [1433314] disasm issues [1170614] relative jumps/calls wrong in debugger [758121] user might get confused when interrupt handler invoked [1170622] You cannot toggle OFF "show" flags [1406387] JMP instruction should display absolute address [1428813] PANIC: ROM address space out of range [1426288] DR-DOSs EMM386 problem [1412036] Bochs cannot recognize PCI NIC correctly [435115] dbg: modebp broken and no docs [1419366] disasm cs:eip does not work anymore [1419393] SSE's #XF exception -> "exception(19): bad vector" [1419429] disassembly of "260f6f00" show DS: instead of ES: prefix [1417583] Interrupt behaviour changed from 2.2.1 to 2.2.5 [1418281] 'push' (6A) incorrectly disassembled [1417791] FLDENV generating exception when real hw does not. [1264583] OS/2 1.1 doesn't run ------------------------------------------------------------------------- Changes in 2.2.6 (January 29, 2006): - First major SMP release ! - several APIC and I/O APIC fixes make SMP Bochs booting Windows NT4.0 or Knoppix 4.0.2 without noapic kernel option in SMP configuration. - critical APIC timer bug fixed - obsolete SMP BIOS images removed (MP tables created dynamicaly) - determine number of processors in SMP configuration through .bochsrc new .bochsrc option 'CPU' allows to choose number of processors to emulate - new configure option --enable-smp to configure Bochs for SMP support, the old --enable-processors=N option is deprecated - CPU and internal debugger fixes - enabled #PCE bit in CR4 register, previosly setting of this bit generated #GP(0) fault - enabled LAHF/SAHF instructions in x86-64 mode - fixed bug in PMULUDQ SSE2 instruction - fixes in Bochs debugger - Configure and compile - enable VME (virtual 8086 mode extensions) by default if cpu-level >= 5 - enable Bochs disassembler by default for all configurations - win32 installer script improvements - ips parameter moved to new 'CPU' option - show IPS value in status bar if BX_SHOW_IPS is enabled - Other - several fixes in the hard drive, keyboard, timer, usb and vga code - new user button shortcut "bksl" (backslash) - updated Bochs instrumentation examples - user and development documentation improved ------------------------------------------------------------------------- Changes in 2.2.5 (December 30, 2005): Brief summary : - added virtual 8086 mode extensions (VME) implementation - several fixes/improvements in x86-64 emulation, debugger and disassembler - new serial mode 'socket' connects a network socket - IDE busmaster DMA feature for harddisks and cdroms completed and enabled - many improvements in Bochs emulated I/O devices (e.g. floppy, cdrom) - Updated LGPL'd VGABIOS to version 0.5d Detailed change log : - CPU - fixed XMM registers restore in FXRSTOR instruction (Andrej Palkovsky) - print registers dump to the log if tripple fault occured - fixed PANIC in LTR instruction (Stanislav) - added virtual 8086 mode extensions (VME) implementation, to enable configure with --enable-vme (Stanislav) - flush caches and TLBs when executing WBINVD and INVD instructions - do not modify segment limit and AR bytes when modifying segment register in real mode (support for unreal mode) - fixed init/reset values for LDTR and TR registers - reimplemented hardware task switching mechanism (Stanislav) - generate #GP(0) when fetching instruction cross segment boundary - CPU (x86-64) (Stanislav Shwartsman) - implemented call_far/ret_far/jmp_far instructions in long mode - fixed IRET operation in long mode - fixed bug prevented setting of NXE/FFXSR bits in MSR.EFER register - implemented RDTSCP instruction - do not check CS.limit when prefetching instructions in long mode - fixed masked write instructions (MASKMOVQ/MASKMOVDQU) in long mode - fetchdecode fixes for x86-64 - APIC - Fixed bug in changing local APIC id (Stanislav) - Fixed reading of IRR/ISR/TMR registers (patch by wmrieker) - Implemented spurious interrupt register (Stanislav, patch by wmrieker) - Fixed interrupt delivery bug (anonymous #SF patch) - Correctly implemented ESR APIC register (Stanislav) - Bochs debugger - Fixed bug in bochs debugger caused breakpoints doesn't fire sometimes (Alexander Krisak) - watchpoints in device memory fixed (Nickolai Zeldovich) - new debug interface to access Bochs CPU general purpose registers with support for x86-64 - Disassembler (Stanislav Shwartsman) - Fixed disassembly for FCOMI/FUCOMI instructions - Full x86-64 support in disassembler. The disassembler module extended to support x86-64 extensions. Still limited by Bochs debugger which is not supporting x86-64 at all ;( - I/O devices (Volker) - general - memory management prepared for large BIOS images (up to 512k) - slowdown timer sleep rate fixed (now using 1 msec on all platforms) - some device specific parameter handlers moved into the device code - serial - new serial mode 'socket' connects a network socket (#SF patch by Andrew Backer) - hard drive / cdrom - assign a unique serial number to each drive (fixes harddrive detection problems with Linux kernels 2.6.x: "ignoring undecoded slave") - geometry autodetection for 'flat' hard disk images added. Works with images created with bximage (heads = 16, sectors per track = 63) - ATAPI command 'read cd' implemented, some other commands improved - cdrom read block function now tries up to 3 times before giving up - emulation of raw cdrom reads added, some other lowlevel cdrom fixes - IDE busmaster DMA feature for harddisks and cdroms completed and enabled - disk image size limit changed from 32 to 127 GB - split ATA/ATAPI emulation code and image handling code - floppy - fixes for OS/2 (patch by Robin Kay) - disk change line behaviour fixed (initial patch by Ben Lunt) - end-of-track (EOT) condition handling implemented - more accurate timing for read/write data and format track commands using a motor speed of 300 RPM - timing of recalibrate and seek commands now depends on the step rate, date rate and the steps to do - floppy controller type changed to 82077AA - cmos - RTC 12-hour and binary mode implemented - number of CMOS registers changed from 64 to 128 - bochsrc option 'cmosimage' improved - save cmos image on exit if enabled - speaker - simple speaker support for OS X added (patch by brianonn@telus.net) - pci - BeOS boot failure fix in the PCI IDE code - don't register i/o and memory regions during PCI probe - vga - memory allocation for vga extensions fixed - usb - some bugfixes by Ben Lunt (mouse and keypad are usable now) - networking modules - VDE networking module now enabled on Linux - display libraries - general - new syntax for the userbutton shortcut string and more keys supported - win32 - fixed keycode generation for right alt/ctrl/shift keys - runtime dialog is now a property sheet - x11 - simple dialog boxes for the "ask" and "user shortcut" feature implemented - Slovenian keymap added (contributed by Mitja Ursic) - configuration interface - ask dialog is now enabled by default for win32, wx and x display libraries - bochsrc option floppy_command_delay is obsolete now (floppy timing now based on hardware specs) - floppy image size detection now available in the whole config interface - some device specific parameter handlers moved into the device code - calculate BIOS ROM start address from image if not specified - System BIOS (Volker) - PCI i/o and memory base address initialization added - several keyboard interrupt handler fixes (e.g. patch by japheth) - several floppy fixes (e.g. OS/2 works with patch by Robin Kay) - some more APM functions added - Updated LGPL'd VGABIOS to version 0.5d - generate SMP specific tables dynamicly by the Bochs memory init code - SF patches applied [1389776] Disk sizes over 64 Gbytes by Andrzej Zaborowski [1359162] disasm support for x86-64 by Stanislav Shwartsman [857235] task priority and other APIC bugs, etc by wmrieker [1359011] build breaks for 386 + debugger + disasm by shirokuma [1352761] Infinite loop when trying to debug a triple exception [1311170] small APIC bug fix (interrupt sent to the wrong CPU) [1309763] Watchpoints don't work in device memory by Nickolai Zeldovich [1294930] change line status on floppy by Ben Lunt [1282033] SSE FXRESTORE not working correctly by Ondrej Palkovsky [816979] wget generalizations by Lyndon Nerenberg [1214886] No more pageWriteStamp / unified icache by H. Johansson [1107945] com->socket redirection support by Andrew Backer - these S.F. bugs were closed [669180] win95 install : unknown SET FEATURES subcommand 0x03 [1346692] bochs 2.2.1 VGA BIOS error [1354963] floppy in KolibriOS [1378204] error: bochs-2.2.1, --enable-sb16, --disable-gameport [1368412] VDE problems in BOCHS [533446] CPU and APIC devices appear twice [1000796] bximage fails to create image of specified size [1170793] Quarterdeck QEMM doesn't work [923704] Multiple opcode prefixes don't reflect Trap 13 [1166392] DocBook/documentation issues [1368239] broken grater than 4GB size of sparse type hd image [1365830] i386 compile breaks on paging [427550] Incomplete IRETD implementation [1215081] MSVC workspace STILL not fixed [736279] Jump to Task [1356488] FD change fail & occur error [957615] [CPU ] prefetch: RIP > CS.limit [1353866] not booting linux-2.6.14 [1351667] load32bitOSImage does not work with --enable-x86-debugger [1217476] Incorrect (?) handling of segment registers in real mode [1184711] OS2 DOS crash [2.2.pre2] [624330] support for disks > 32GiB [1348368] bochs 2.2.1 bximage error [1342081] Configuration Menu option failed [1138616] OS/2 Warp 4 hangs when booting [1049840] mouse and video conflict [1164570] Unable to perform Fedora Core 4 test 1 installation [1183201] Windows 2000 (MSDN build 2150?) does not completely install [1194284] Can't boot from CD-ROM (Windows NT) [962969] Windows NT crashes while trying to intall them. [1054594] WinXP install halts (redo) [1153107] Windows XP fails with BSOD on 'vga' [938518] Win XP installation fails [645420] getHostMemAddr vetoed direct read [1179985] MS XENIX: >>PANIC<< VGABIOS panic at vgabios.c, line 0 [1329600] WBINVD and INVD should flush caches and TLB [638924] eliminate BX_USE_CONFIG_INTERFACE [1048711] Funny behaviour with CTRL [1288450] keyboard BIOS error [1310706] Keyboard - about key SHIFT [1295981] Ubuntu 5.04 Live-CD won't boot in Bochs [879047] APIC timer behavior different before reset and after [1188506] I still can't install the german Windows XP! [1301847] Windows XP dosn't boot - FXRSTOR problem ? [661259] does not boot QNX under WinX [924412] Keyboard lock states all whacked [681127] MIPSpro compiler (IRIX) is allergic to ^M [1285923] BIOS keyboard handler [516639] ATA controller revisited... [657918] does not boot BeOS under WinX [649245] BeOS CD locks halfway on boot [1094385] Attachment for bug 1090339 (beos failure) [1183196] BeOS 4.5 developer CD does not install [1090339] BeOS fails to boot [639484] panics when int 13 is called [711701] divide by zero [704295] ATAPI/BIOS call missing [682856] hard drive problems [627691] Cursor keys problem [588011] keyboard not working [542260] os/2 warp crashes with floppy handling [1273878] SB16 doesn't work in pure DOS [542254] OS/2 FDC driver dies [1099610] Windows 98 SE Does not install [875479] cr3 problem on task switch [731423] NE2000 causing PANIC on Win2K detection [1156155] bochs fails to boot plan9 iso [1251979] --enable-cpu-level=3 should assume --without-fpu [1257538] Interupt 15h 83h - set wait event interval [658396] Panic for DR DOS emm386 [679339] /? doesn't divulge Bochs command-line syntax [1167016] call/jump/return_protected doesn't support x86-64 [1252432] Mac OS X compile bug [881442] Bochs 2.1 PANIC when loading DOS Turbo Pascal protected mode [1249324] Boch2.2.1 Buffer Overfollow in void bx_local_apic_c::init () [1197144] 'make install' has dependency on wget [1079595] LTR:386TSS: loading tr.limit < 103 [1244070] Compilation Error in gui/rfb.cc [761707] CPU error when trying to start Privateer [517281] Crash running Privateer in DOS... ------------------------------------------------------------------------- Changes in 2.2.1 (July 8, 2005): - Fixed several compilation warnings and errors for different platforms (Volker) - Fixed FPU tag word restore in FXRSTOR instruction (Stanislav) - Added missing scancodes for F11 and F12 to BIOS translation table (Volker) - Bochs disassembler bugfixes (h.johansson) - About 5% emulation speed improvement (h.johansson) - Handle writing of zero to APIC timer initial count register (Stanislav) - Enable Idle-Hack for 'TERM' GUI (h.johansson) - Reduced overhead of BX_SHOW_IPS option to minimum. Now every simulation could run with --enable-show-ips without significant performance penalty. (Stanislav) - Fixed pcipnic register access (Volker) - Limited write support for TFTP server in 'vnet' networking module added (Volker) - Changed some timing defaults to more useful values (Volker) - WinXP/2003 style common controls now supported (Vitaly Vorobyov) - Updated LGPL'd VGABIOS to version 0.5c (Volker) - Added new BX_INSTR_HLT callback to instrumentation (Stanislav) ------------------------------------------------------------------------- Changes in 2.2 (May 28, 2005): Brief summary : - New floating point emulator based on SoftFloat floating point emulation library. - improved x86-64 emulation - Cirrus SVGA card emulation added - status bar with indicators for keyboard, floppy, cdrom and disk (gui dependant) - many improvements in Bochs emulated I/O devices (e.g. PCI subsystem) Detailed change log : - CPU - fixes for booting OS/2 by Dmitri Froloff - fixed v8086 priveleged instruction processing bug (was also reported by LightCone Aug 7 2003) - exception process bug (was reported by Diego Henriquez Sat Nov 15 01:16:51 CET 2003) - segment validation with IRET instruction - CS segment not present exception processing with IRET - several fixes by Kevin Lawton - add MSVC host asm instructions (patch by suzu) - fixed bug in HADDPD/HSUBP

Borland Delphi 2005 Architect Update 3----------Report #: Short Description: Rating: Status12241 IntToHex returns lowercase letters0.00 of 5 Closed11881 TStringStream constructor for .NET sets Position incorrectly0.00 of 5 Closed11787 Access violation using Code Insight when editing the uses clause0.00 of 5 Closed11759 TList instance leaked in DBCommon.pas when using IN operator in Filter expression5.00 of 5 Closed11651 New EllipsisPosition property causes text to be invisible & process to hang5.00 of 5 Closed11471 Cannot manage StarTeam association since applying Update20.00 of 5 Closed11353 (strict) protected nested class become public3.67 of 5 Closed11314 Too much inlining yields unstable compiled code.0.00 of 5 Closed11266 Inline causes compile error : F2084 Internal Error SCR765.00 of 5 Closed11193 Inlined function affects working of the enclosing for loop0.00 of 5 Closed11184 [Fatal Error] F2084 Internal Error: ILLK26340.00 of 5 Closed11069 Compact the TApplication.ProcessMessage code fragment for Unicode handling5.00 of 5 Closed10918 TColorBox control custom color selection causes AV0.00 of 5 Closed10873 Internal error: URW 793 when using constant struct with enums2.00 of 5 Closed10861 Access Violation when compiling code with default index property0.00 of 5 Closed10772 Designer improperly handles controls tagged with [ToolboxItem]0.00 of 5 Closed10669 TWideStrings has no GetEnumerator method0.00 of 5 Closed10661 Switching between form and source view cause long delay4.67 of 5 Closed10567 Ability to create all VCL packages0.00 of 5 Closed10498 D2005: DataSet lots of methods missing in code completion0.00 of 5 Closed10450 The Ellipse is drawn over some of the caption text when a form is docked in IDE0.00 of 5 Closed10381 Constant array of procedural types crashes compiler5.00 of 5 Closed10376 The Delphi 2k5 IDE UpTime & project loading is very SLOW4.00 of 5 Closed10314 Error Insight fails to flag an error4.00 of 5 Closed10248 Alignment Palette in VCL form designer malfunctions5.00 of 5 Closed10190 List view selected item no longer selected5.00 of 5 Closed10009 Double-click in the Search Results window0.00 of 5 Closed9912 Press Enter on Component crashes Delphi 20050.00 of 5 Closed9847 Transactional Object Wizard Missing0.00 of 5 Closed9712 The XML documentation feature doesn't associate comments with the correct symbols5.00 of 5 Closed9690 "Cannot focus a disabled or invisible window" in IDE0.00 of 5 Closed9666 Code Completion doesn't show all available items when using overload5.00 of 5 Closed9639 Active Form wizard not available in Delphi 2005 but mentioned in online help5.00 of 5 Closed9634 IDE response too SLOW4.63 of 5 Closed9578 TXPManifest + TFrame + TLabel + TRadioGroup = bad5.00 of 5 Closed9477 Delphi .NET assembly references with strong names5.00 of 5 Closed9254 Incorrect reference public key token included into Delphi8 strong-named assembly metadata4.00 of 5 Closed9021 Memory Leak in TreeView0.00 of 5 Closed8866 Assigning long string values (greater than 8192 characters) to TStringFields results in access violation.5.00 of 5 Closed8785 Filter or Ranges on Nested Dataset's should restrict master as well.0.00 of 5 Closed8417 TCustomSQLDataSet.GetFieldData implementation0.00 of 5 Closed8229 Error in code when database doesn't support schema/owner names5.00 of 5 Closed8032 Show modified code in the scrollbar0.00 of 5 Closed8021 TIndexDef.Assign Doesn't copy DescFiels and CaseInsFields5.00 of 5 Closed8001 SQLDataset doesn't call .Close on dbExpress driver cursor when closing5.00 of 5 Closed7912 TCustomClientdataset: properties "IndexDefs" and "IndexName" should be public0.00 of 5 Closed7872 double exception in method TDataSetProvider.InternalGetRecords5.00 of 5 Closed7809 SetOptionalParam don't work0.00 of 5 Closed7768 An Easy Feature Request: TDataset.CopyFields4.00 of 5 Closed7290 Grid's functionality enhancement5.00 of 5 Closed7199 Class Completion erroneously adds fields to a complete class if the getter functions starts with F5.00 of 5 Closed7082 Add SSE3 / PNI instructions to the BASM5.00 of 5 Closed7005 New control request - TDBStaticText - Add possibility to have Edge Borders0.00 of 5 Closed6985 Add node for unit name in Find in Files results in Message Window0.00 of 5 Closed6803 WebToolBar problem with buttons0.00 of 5 Closed6558 AV in DBGrid when destroying DataSet0.00 of 5 Closed6428 Labels disappear with XPManifest5.00 of 5 Closed6368 Resolving lookup- & calculated fields to datafields4.00 of 5 Closed6238 DBNavigator and DBGrid compliant with Federal Section 5080.00 of 5 Closed6021 Labels not visible in Windows XP0.00 of 5 Closed5951 Internal error: SY5764.44 of 5 Closed5812 TComboBox.Focused method does not always return good results.1.00 of 5 Closed5803 Unable to delete component if code editor minimized in saved desktop5.00 of 5 Closed5763 Cannot debug datamodule containing many objects0.00 of 5 Closed5699 Apache shared modules do not work with Apache 2.0.4x5.00 of 5 Closed5592 New event OnValidate that is fired before applying updates2.00 of 5 Closed5336 fatal error: Internal Error: L6812.33 of 5 Closed5283 Cannot read complete compiler error message.0.00 of 5 Closed5280 MessageDlg returns mrNone instead of mrCancel when aborted5.00 of 5 Closed5248 Assert fails to break and leaves FPU invalid op exception set.4.50 of 5 Closed4627 Cannot assign -2147483648 into INTEGER Variable4.00 of 5 Closed4624 A way to set both Width and Height of TBitmap (speed reason)4.85 of 5 Closed4581 Field description and Label3.00 of 5 Closed4444 IncMilliSeconds...IncHour with DateTime<0 wrong0.00 of 5 Closed4343 Proposal of modification of the TDataSet.Post method in DB.pas unit1.00 of 5 Closed4184 Delphi DLL using sharemem called from VC++ exe AV on exit3.25 of 5 Closed4172 tFrames and XPMan hiding controls5.00 of 5 Closed3850 TGraphicControl descendants invisible in frames with XP Manifest4.60 of 5 Closed3792 TryEncodeDateTime not correct for dates before Dec. 30, 18995.00 of 5 Closed3776 Add full IDL support0.00 of 5 Closed3718 Automatic Required setting of TField not consistent with SQL3.71 of 5 Closed3542 Strange limits in property CommandText2.40 of 5 Closed2881 DBGrid doesn't repaint when Enabled changed.5.00 of 5 Closed2625 Impossible to open a .TLB into the TLB Editor if missing uses reference3.50 of 5 Closed2608 Compiler crashes, dcc70.dll Read of address 000000004.00 of 5 Closed2572 Unable to sort on columns in module view3.00 of 5 Closed2382 TListView doesn't update correctly in OwnerData mode.4.00 of 5 Closed2276 'deprecated' warning appears when it shouldn't4.31 of 5 Closed2258 Failure to parse/compile integer constant --2147483648 and lower4.86 of 5 Closed2236 Delphi converts Text DFM's to binary with these steps4.71 of 5 Closed1685 Compiler error message refers to HIGH when it should be LOW3.43 of 5 Closed1455 GetRange method3.38 of 5 Closed1209 Context help does not work for TComboboxEx3.67 of 5 Closed1177 ResourceString limitation of 1024 characters3.89 of 5 Closed（出处：www.borland.com）

delphi word 什么是(OLE)自动化？什么是自动化服务器？什么是自动化客户端？ ( What is (OLE) Automation? What is Automation Server? What is Automation Client? ) Suppose you are developing an HTML editor like HTML Kit. As like ...

5,928

社区成员

262,931

社区内容

发帖

与我相关

我的任务

社区管理员

加入社区

近7日
近30日
至今

加载中

查看更多榜单

社区公告

暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章