ASA5510基础操作ios
检查flash卡是否正常
物理上 ASA5510有两个FLASH卡插槽 一个在内部,一个在外部。内为disk0,外为disk1.
在rommon模式下使用boot查看flash中有无系统。如果有会直接进入系统,这时候需要看一下系统寄存器。当时看值为0x00002102现象是不读flash直接进入rommon模式。
改为0x00000045后恢复正常。
进入系统后,show flash : ; show disk0:;show disk1:; 才看到了两张flash。
更改寄存器步骤:
rommon #0> confreg
Current Configuration Register: 0x00002102
Configuration Summary:
boot ROMMON, boot command will load index-1 image from Flash
load ROMMON if netboot fails
Do you wish to change this configuration? y/n [n]: y
enable boot to ROMMON prompt? y/n [n]: n
enable TFTP netboot? y/n [n]: n
enable Flash boot? y/n [n]: y
select specific Flash image index? y/n [n]: y
enter Flash image index [1->7]: 2 //这里选二就是选flash里的: asa724-k8.bin
disable system configuration? y/n [n]: n
go to ROMMON prompt if netboot fails? y/n [n]: n
enable passing NVRAM file specs in auto-boot mode? y/n [n]: y
disable display of BREAK or ESC key prompt during auto-boot? y/n [n]: y