make bzImage后出错 如何解决？

[coolfire814]

下面是出错代码
root@coolfire:/usr/src/linux# make bzImage
scripts/split-include include/linux/autoconf.h include/config
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DKBUILD_BASENAME=main -c -o init/main.o init/main.c
In file included from /usr/src/linux/include/linux/prefetch.h:13,
from /usr/src/linux/include/linux/list.h:6,
from /usr/src/linux/include/linux/wait.h:14,
from /usr/src/linux/include/linux/fs.h:12,
from /usr/src/linux/include/linux/capability.h:17,
from /usr/src/linux/include/linux/binfmts.h:5,
from /usr/src/linux/include/linux/sched.h:9,
from /usr/src/linux/include/linux/mm.h:4,
from /usr/src/linux/include/linux/slab.h:14,
from /usr/src/linux/include/linux/proc_fs.h:5,
from init/main.c:15:
/usr/src/linux/include/asm/processor.h:73: ??: ??????????
In file included from /usr/src/linux/include/linux/fs.h:201,
from /usr/src/linux/include/linux/capability.h:17,
from /usr/src/linux/include/linux/binfmts.h:5,
from /usr/src/linux/include/linux/sched.h:9,
from /usr/src/linux/include/linux/mm.h:4,
from /usr/src/linux/include/linux/slab.h:14,
from /usr/src/linux/include/linux/proc_fs.h:5,
from init/main.c:15:
/usr/src/linux/include/asm/byteorder.h:14: ??: ?????????????
/usr/src/linux/include/asm/byteorder.h:28: ??: ?????????????
In file included from /usr/src/linux/include/linux/byteorder/little_endian.h:11,
from /usr/src/linux/include/asm/byteorder.h:45,
from /usr/src/linux/include/linux/fs.h:201,
from /usr/src/linux/include/linux/capability.h:17,
from /usr/src/linux/include/linux/binfmts.h:5,
from /usr/src/linux/include/linux/sched.h:9,
from /usr/src/linux/include/linux/mm.h:4,
from /usr/src/linux/include/linux/slab.h:14,
from /usr/src/linux/include/linux/proc_fs.h:5,
from init/main.c:15:
/usr/src/linux/include/linux/byteorder/swab.h:132: ??: ?????????????
/usr/src/linux/include/linux/byteorder/swab.h:145: ??: ?????????????
/usr/src/linux/include/linux/byteorder/swab.h:159: ??: ?????????????
In file included from /usr/src/linux/include/linux/sched.h:23,
from /usr/src/linux/include/linux/mm.h:4,
from /usr/src/linux/include/linux/slab.h:14,
from /usr/src/linux/include/linux/proc_fs.h:5,
from init/main.c:15:
/usr/src/linux/include/linux/smp.h:29: ??: 'smp_send_reschedule' ????
/usr/src/linux/include/asm/smp.h:65: ??: 'smp_send_reschedule' ????????
In file included from /usr/src/linux/include/linux/unistd.h:9,
from init/main.c:17:
/usr/src/linux/include/asm/unistd.h:360: ??: ???? '_exit' ????
make: *** [init/main.o] Error 1

[coolfire814]

用make xconfig
make dep
make clean
都没出错
但是就是 make bzImage 出错了
哪位强人来帮我下阿

[superAfx]

我以前make bzImage的时候，最后一步出错是经常的;

常规解决方法:make clean// again
重新make menuconfig// 以前不喜欢xconfig

顺便问一下：lz编译内核是干哈的啊~~~~~~

[coolfire814]

谢谢ls~ 学校上课要用2.4.18的
不想用虚拟机了 就想在现在的机器上编译
顺便学习..
等会用你的方法试试

[geopower]

内核参数设置错误，如果你机器没有多CPU，就去掉smp选项
Symmetric multi-processing support

[coolfire814]

ls强人果然有错
不过貌似还有其他的....
这两天学习下来 原来编译最麻烦的是配config
看来我的linux还很漫长

[foxman]

借贵地问一下:下载解压了binutils2.17后怎么升级binutils啊?因为我在RH9下升级2.6内核需要升级binutils,否则make bzImage出错

[superAfx]

make oldconfig// 命令行配置（不断的问你Y/N/M）
make menuconfig// 命令行下的简单图形界面配置(集中配置，最后一次性保存)
make xconfig// GUI图形界面的配置（集中配置，最后一次性保存）

效果都一样的；

[coolfire814]

在用ubuntu , 不了解你的问题..

我依旧我的问题
如果config实在配不好
我是不是可以用make oldconfig?
有什么需要注意的?
有人帮我解答下伐?谢谢

[tjlgdx2000]

如果你使用的内核不是第一次编译的话建议在make menuconfig之前，先make mrproper下，清除下原来生成的中间文件

[coolfire814]

回楼上的，用过make mrproper
现在在2.6.15中编译，原来gcc 的版本是4.0
现在换成2.95了 想编译2.4.18的
出错信息：
make[1]: Entering directory `/usr/src/linux/arch/i386/kernel'
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DKBUILD_BASENAME=process -c -o process.o process.c
{standard input}: Assembler messages:
{standard input}:950: Error: suffix or operands invalid for `mov'
{standard input}:951: Error: suffix or operands invalid for `mov'
{standard input}:1044: Error: suffix or operands invalid for `mov'
{standard input}:1045: Error: suffix or operands invalid for `mov'
{standard input}:1103: Error: suffix or operands invalid for `mov'
{standard input}:1104: Error: suffix or operands invalid for `mov'
{standard input}:1106: Error: suffix or operands invalid for `mov'
{standard input}:1118: Error: suffix or operands invalid for `mov'
make[1]: *** [process.o] Error 1
make[1]: Leaving directory `/usr/src/linux/arch/i386/kernel'
make: *** [_dir_arch/i386/kernel] Error 2

process.o 我猜是cpu的 kernel不知道是什么的

我是直接用/boot下现有的config 文件，然后编译的
可能硬件信息有问题 我再去多试试

谢谢楼上各位的帮助 我想我一定能走出这一步的

[proware]

xue xi..