各位大虾救命啊！答者有分。

和码帮主 2002-07-03 03:46:43

还有：
21. What files make up the Windows 98 Registry?
a) REGISTRY.W98 and REGISTRY.DAT
b) SYSTEM.INI and WIN.INI
c) PROFILE.USR and PROFILE.MAN
d) USER.DAT and SYSTEM.DAT

22. You want to run Win98 and WinNT on one machine. What you have to install when you want to keep the security advantage for NT operating system?
a) Install Win98 first (format the drive with FAT32), then install WinNT
b) Install WinNT first (format the drive with NTFS), then install Win98
c) Install WinNT first (format the drive with FAT), then install Win98
d) None of above

23. Where can user check the memory address used by devices in Windows NT 4.0?
a) Not support by Windows NT 4.0
b) Device manager in system properties
c) Control Panel - Devices
d) NT diagnostic

24. Where can you install SCSI driver in Windows NT 4.0?
a) SCSI in Control Panel
b) Find other device in device manager of system properties, update drivers.
c) Add new hardware in Control Panel
d) Control Panel - Devices

25. The file systems used by Windows NT are a
a) NTFS 4.0
b) NTFS 5.0 (This is an option answer, NT can support NTFS5.0 after SP5)
c) FAT16
d) FAT32

26. You had some type of SCSI hardware to your computer. Where in the Registery would you find information on it?
a) Hkey_User
b) HKey_Current_User
c) Hkey_root
d) Hkey_Local_Machine

27. You have a network with 28 Windows NT clients. 13 of them are mobile users. These users can dial in to make a connection to your Win NT Server through RAS, but also work on site. When these users are on site you don’t want them to be able to dial in to the network. How can you stop them from doing this?
a) Create a "onsite" hardware profile, boot up and select this profile and uninstall dial up networking.
b) Create a "onsite" hardware profile, boot up and select this profile and disable the dial up adapter from device manager.
c) Create a "onsite" hardware profile, disable the dial up adapter in Control Panel – Devices for this hardware profile
d) Create a "onsite" hardware profile, disable RAS service in Control Panel – Services for this hardware profile

28. You are the administrator of a single domain Windows NT 4.0 network. The domain name is CN-DOMAIN. One of your end user just installed a new NT 4.0 system named as “new”. He asks you to add this system to the domain. What do you need to do? (Choose all)
a) Add a computer named as “new” in the server side. Then doing the following setting in client side: Go to Control Panel – Network, Select “Add the system into Domain”, key in the domain name “CN-DOMAIN”
b) Go to Control Panel – Network, Select “Add the system into Domain”, key in the domain name “CN-DOMAIN”, provide domain administrator name and password.
c) Go to Control Panel – Network, Select “Add the system into Domain”, key in the domain name “CN-DOMAIN”, provide local administrator name and password.
d) Go to Control Panel – Network – Microsoft Network Client, select “Login to Domain”, and enter the domain name “CN-DOMAIN”

29. You are using Windows NT 4.0. You can use modem to connect to Internet. You also want to use this system to accept dial in calls and establish connection with dial in computers. Where do you need to set the system to “accept dial in calls”?
a) Control Panel – Dialup Network
b) Control Panel – Network – Service
c) My Computer – Dialup Network
d) Control Panel – Service

30. You are installing Windows NT 4.0 through the Installation CD. The HD you used is 20GB, and HD can be detected as 20G in bios. But after finish installation, you can only find 8GB space in NT disk administrator. What do you do to fix this problem?
a) Install NT Service Pack 5
b) Flash BIOS
c) Using FDISK to create one extend partition and one logical partition for the rest disk space.
d) The HD drive is faulty and will have to be replaced.

31. You are installing Windows NT 4.0 through the Installation CD. The HD you used is 20GB. There is no partition in the HD. During installation, you need to create a partition for system installation. You want to use NFTS format. What is the maximum size of the partition you can create?
a) 2G
b) 4G
c) 8G
d) 20G

32. A customer needs to read and write Chinese in notepad. His OS is Windows 2000 English version. What he needs to do? (Choose all)
a) Install Microsoft Multi-Language pack
b) Install Chinese support in IE
c) Add Chinese support in regional settings
d) Add Chinese input method support in regional settings

33. A customer reports his system is Windows 2000. While he boot up the system, it reports: “Can not find NTLDR”. What should he do? (Choose all)
a) Remove the floppy diskette in the floppy drive
b) Boot with a Windows 2000 boot disk, check boot.ini in HD
c) Boot with Windows 2000 installation CD, enter safe mode to check the partition status
d) Boot with Windows 2000 installation diskettes, enter command console mode, use fixmbr and fixboot to fix the boot environment

34. A customer reports his system is Windows 2000. While he boot up the system, it reports: “Windows 2000 could not start because the following file is missing or corrupt: \winntroot\system32\ntoskrnl.exe”. What should he do (Choose all)
a) Remove the floppy diskette in the floppy drive
b) Boot with a Windows 2000 boot disk, check boot.ini in HD
c) Boot with Windows 2000 installation CD, enter safe mode to check the partition status
d) Boot with Windows 2000 installation diskettes, enter command console mode, use fixmbr and fixboot to fix the boot environment

35. A customer reports his system is Windows Me. While he boot up the system, only a cursor flash in the left of the screen. What should he do first?
a) Format the HD and reinstall OS
b) Boot with Windows Me boot disk, backup MSDOS.SYS, run SYS C: to transfer the boot files, then copy MSDOS.SYS back to C: drive (this one is incorrect because WinMe does not support sys)
c) Check partition status with fdisk.
d) Boot with Windows Me boot disk, run scanreg /restore

36. A customer reports his system is Windows 98. While he boot up the system, only a cursor flash in the left of the screen. Press F8 while boot, no boot menu pops up. What should he do? (Choose all)
a) Format the HD and reinstall OS
b) Boot with Windows 98 boot disk, backup MSDOS.SYS, run SYS C: to transfer the boot files, then copy MSDOS.SYS back to C: drive
c) Check partition status with fdisk.
d) Boot with Windows 98 boot disk, run scanreg /restore

37. The biggest FAT32 partition which can be created by Windows XP is:
a) 2G
b) 4G
c) 32G
d) 2T
e) No limit

38. How many layers are there in the OSI reference model?
a) 9
b) 7
c) 5
d) 4

39. A user use TCP/IP in a NT Domain. He is working in a NT workstation and trying to connect to a NT server named as NTSERVER. He can ping IP address of the NT server, but can not ping “NTSERVER”. What is the problem?
a) IP address is wrong
b) The Sub Mask is wrong
c) WINS server has problem
d) DNS server has problem

...全文