flash保存注册表问题求助

[tongjijd]

想用norflash做hive based，按照说的改好后运行
出现如下信息：
Found pTOC signature.
ROMHDR at Address 60000044h
RomHdr.ulRAMStart=00FF0000h RomHdr.physfirst=29B00000h.
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
EBOOT: pCfgData = 0x6247A, pCfgData->Flags
INFO: Jumping to image at 0x60001006...
Windows CE Kernel for ARM (Thumb Enabled) Built on Mar 13 2003 at 22:52:56
ProcessorType=0920 Revision=0
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 88001160
InitClock...
Processor = 199Mhz, Bus = 99Mhz
Sp=ffffc7cc
INFO: FMD_Init.
INFO: InitializeFlash.
到这里就再也没有反映了 这是什么原因呢？请高手指教

相关设置
MEMORY
RESERVED 80000000 00008000 RESERVED
DRV_GLB 80008000 00001000 RESERVED
CS8950 80010000 00030000 RESERVED
EDBG 80040000 00080000 RESERVED
FRAMEBUF 800C0000 00200000 RESERVED
RAM 802C0000 01D40000 RAM
NK 88000000 02000000 RAMIMAGE
CONFIG
COMPRESSION=ON
PROFILE=OFF
ROMSTART=88000000
ROMSIZE=2000000
ROMWIDTH=32

;
; Used for making a copy to RAM 0x80000000
;
; 0x88000000 + 0xD8000000 = 0x60000000
ROMOFFSET=0xD8000000
ROMFLAGS=1
KERNELFIXUPS=ON
AUTOSIZE=OFF

[fengwx]

你给Flash分的文件系统空间有多大，norflash写入速度很慢第一次启动CE时会格式化这个文件系统时间会很长。
检查一下Flash文件系统的空间有没有和NK的空间冲突。

[yanglvrong2008]

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NORFlash]
"Dll"="ep93xxnorflash.dll"
"Order"=dword:2
"Prefix"="DSK"
"Ioctl"=dword:4
"Profile"="MSFlash"
"IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"

#if $(BSP_EP93XX_FLASH_TYPE) == FLASH_TYPE_P3

"MemBase"=multi_sz:"A8000000","AA000000"
"MemLen" =multi_sz:"4000000","2000000"

#elif $(BSP_EP93XX_FLASH_TYPE) == FLASH_TYPE_C3

"MemBase"=multi_sz:"A8000000","A8400000"
"MemLen" =multi_sz:"800000","200000"

#elif $(BSP_EP93XX_FLASH_TYPE) == FLASH_TYPE_AMD

"MemBase"=multi_sz:"A8000000","A8400000"
"MemLen" =multi_sz:"1000000","200000"
#else
;"MemBase"=multi_sz:"A8000000","A9C00000"
;"MemLen" =multi_sz:"2000000","400000"
;"MemLen" =multi_sz:"1f00000","300000"

"MemBase"=multi_sz:"A6000000","A6160000"
"MemLen" =multi_sz:"2000000","40000"
"MemLen" =multi_sz:"1f00000","300000"
#endif

各位高手，能否指点一下小弟，上面的参数的意义，如何设置
我用的是ep9315,wince5,两片并行16M的flash.
开始地址0x60000000,NK.bin的大小大致25M内，想把剩余的flash设置为文件保存区，
花几天调试也没调通，那位高手指点指点啊