nand_flash s3c2410.h

[ice197983]

#ifndef _S3C2410_H
#define _S3C2410_H
// watchdog register
#define rWTCON (*(volatile unsigned int *)0x53000000)
//interrupt register
#define rSRCPND (*(volatile unsigned int *)0x4A000000)
#define rSUBSRCPND (*(volatile unsigned int *)0x4A000018)
#define rINTMOD (*(volatile unsigned int *)0x4A000004)
#define rINTMSK (*(volatile unsigned int *)0x4A000008)
#define rINTSUBMSK (*(volatile unsigned int *)0x4A00001C)
#define rPRIORITY (*(volatile unsigned int *)0x4A00000C)
#define rINTPND (*(volatile unsigned int *)0x4A000010)
#define rINTOFFSET (*(volatile unsigned int *)0x4A000014)
// bank ctrl register
#define rBWSCON (*(volatile unsigned int *)0x48000000)
#define rREFRESH (*(volatile unsigned int *)0x48000024)
// NAND flash register
#define rNFCONF (*(volatile unsigned int *)0x4e000000) //NAND Flash configuration
#define rNFCMD (*(volatile unsigned char *)0x4e000004) //NADD Flash command
#define rNFADDR (*(volatile unsigned char *)0x4e000008) //NAND Flash address
#define rNFDATA (*(volatile unsigned char *)0x4e00000c) //NAND Flash data
#define rNFSTAT (*(volatile unsigned int *)0x4e000010) //NAND Flash operation status
#define rNFECC (*(volatile unsigned int *)0x4e000014) //NAND Flash ECC
#define rNFECC0 (*(volatile unsigned char *)0x4e000014)
#define rNFECC1 (*(volatile unsigned char *)0x4e000015)
#define rNFECC2 (*(volatile unsigned char *)0x4e000016)

// I/O PORT register
#define rGPACON (*(volatile unsigned int *)0x56000000) //Port A control
#define rGPADAT (*(volatile unsigned int *)0x56000004) //Port A data

#define rGPBCON (*(volatile unsigned int *)0x56000010) //Port B control
#define rGPBDAT (*(volatile unsigned int *)0x56000014) //Port B data
#define rGPBUP (*(volatile unsigned int *)0x56000018) //Pull-up control B

#define rGPCCON (*(volatile unsigned int *)0x56000020) //Port C control
#define rGPCDAT (*(volatile unsigned int *)0x56000024) //Port C data
#define rGPCUP (*(volatile unsigned int *)0x56000028) //Pull-up control C

#define rGPDCON (*(volatile unsigned int *)0x56000030) //Port D control
#define rGPDDAT (*(volatile unsigned int *)0x56000034) //Port D data
#define rGPDUP (*(volatile unsigned int *)0x56000038) //Pull-up control D

#define rGPECON (*(volatile unsigned int *)0x56000040) //Port E control
#define rGPEDAT (*(volatile unsigned int *)0x56000044) //Port E data
#define rGPEUP (*(volatile unsigned int *)0x56000048) //Pull-up control E

#define rGPFCON (*(volatile unsigned int *)0x56000050) //Port F control
#define rGPFDAT (*(volatile unsigned int *)0x56000054) //Port F data
#define rGPFUP (*(volatile unsigned int *)0x56000058) //Pull-up control F

#define rGPGCON (*(volatile unsigned int *)0x56000060) //Port G control
#define rGPGDAT (*(volatile unsigned int *)0x56000064) //Port G data
#define rGPGUP (*(volatile unsigned int *)0x56000068) //Pull-up control G

#define rGPHCON (*(volatile unsigned int *)0x56000070) //Port H control
#define rGPHDAT (*(volatile unsigned int *)0x56000074) //Port H data
#define rGPHUP (*(volatile unsigned int *)0x56000078) //Pull-up control H

//UART register
#define rULCON0 (*(volatile unsigned int *)0x50000000) //UART 0 Line control
#define rUCON0 (*(volatile unsigned int *)0x50000004) //UART 0 Control
#define rUFCON0 (*(volatile unsigned int *)0x50000008) //UART 0 FIFO control
#define rUMCON0 (*(volatile unsigned int *)0x5000000C) //UART 0 Modem control
#define rUTRSTAT0 (*(volatile unsigned int *)0x50000010) //UART 0 Tx/Rx status
#define rUERSTAT0 (*(volatile unsigned int *)0x50000014) //UART 0 Rx error status
#define rUFSTAT0 (*(volatile unsigned int *)0x50000018) //UART 0 FIFO status
#define rUMSTAT0 (*(volatile unsigned int *)0x5000001C) //UART 0 Modem status
#define rUBRDIV0 (*(volatile unsigned int *)0x50000028) //UART 0 Baud rate divisor

#define rUTXH0 (*(volatile unsigned char *)0x50000020) //UART 0 Transmission Hold
#define rURXH0 (*(volatile unsigned char *)0x50000024) //UART 0 Receive buffer
#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch)
#define RdURXH0() (*(volatile unsigned char *)0x50000024)


// CLOCK & POWER MANAGEMENT
#define rLOCKTIME (*(volatile unsigned int *)0x4c000000) //PLL lock time counter
#define rMPLLCON (*(volatile unsigned int *)0x4c000004) //MPLL Control
#define rUPLLCON (*(volatile unsigned int *)0x4c000008) //UPLL Control
#define rCLKCON (*(volatile unsigned int *)0x4c00000c) //Clock generator control
#define rCLKSLOW (*(volatile unsigned int *)0x4c000010) //Slow clock control
#define rCLKDIVN (*(volatile unsigned int *)0x4c000014) //Clock divider control

// LCD register
#define rLCDCON1 (*(volatile unsigned int *)0x4D000000)
#define rLCDCON2 (*(volatile unsigned int *)0x4D000004)
#define rLCDCON3 (*(volatile unsigned int *)0x4D000008)
#define rLCDCON4 (*(volatile unsigned int *)0x4D00000c)
#define rLCDCON5 (*(volatile unsigned int *)0x4D000010)
#define rLCDSADDR1 (*(volatile unsigned int *)0x4D000014)
#define rLCDSADDR2 (*(volatile unsigned int *)0x4D000018)
#define rLCDSADDR3 (*(volatile unsigned int *)0x4D00001c)
#define rREDLUT (*(volatile unsigned int *)0x4D000020)
#define rGREENLUT (*(volatile unsigned int *)0x4D000024)
#define rBLUELUT (*(volatile unsigned int *)0x4D000028)
#define rDITHMODE (*(volatile unsigned int *)0x4D00004c)
#define rTPAL (*(volatile unsigned int *)0x4D000050)
#define rLCDINTPND (*(volatile unsigned int *)0x4D000054)
#define rLCDSRCPND (*(volatile unsigned int *)0x4D000058)
#define rLCDINTMSK (*(volatile unsigned int *)0x4D00005c)
#define rLPCSEL (*(volatile unsigned int *)0x4D000060)

// Timer register
#define rTCFG0 (*(volatile unsigned int *)0x51000000)
#define rTCFG1 (*(volatile unsigned int *)0x51000004)
#define rTCON (*(volatile unsigned int *)0x51000008)
#define rTCNTB0 (*(volatile unsigned int *)0x5100000C)
#define rTCMPB0 (*(volatile unsigned int *)0x51000010)
#define rTCNTO0 (*(volatile unsigned int *)0x51000014)
#define rTCNTB1 (*(volatile unsigned int *)0x51000018)
#define rTCMPB1 (*(volatile unsigned int *)0x5100001C)
#define rTCNTO1 (*(volatile unsigned int *)0x51000020)
#define rTCNTB2 (*(volatile unsigned int *)0x51000024)
#define rTCMPB2 (*(volatile unsigned int *)0x51000028)
#define rTCNTO2 (*(volatile unsigned int *)0x5100002C)
#define rTCNTB3 (*(volatile unsigned int *)0x51000030)
#define rTCMPB3 (*(volatile unsigned int *)0x51000034)
#define rTCNTO3 (*(volatile unsigned int *)0x51000038)
#define rTCNTB4 (*(volatile unsigned int *)0x5100003C)
#define rTCNTO4 (*(volatile unsigned int *)0x51000040)
#endif

[laowang2]

??

[majia_1]

这小子是在网络上保存资料！

[ydlchina]

又让他赚30分