inf文件中出现的HKR是什么意思？谢谢-CSDN社区

Introduction This document describes configuration options for FTDIBUS.SYS. For most operating environments, the default configuration of FTDIBUS is sufficient for normal operation, and it is very unlikely that any of the parameters described here need to be altered. ResetPipeRequestRetryCount ResetPipeRequestRetryCount controls the maximum number of times that FTDIBUS tries to reset a pipe on which an error has occurred. ResetPipeRequestRetryCount defaults to 50. It may be necessary to increase this value in noisy environments where a lot of USB errors occur. The default can be overridden via RetryResetCount in the FTDIBUS service key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FTDIBUS\Parameters\RetryResetCount The device can be installed with ResetPipeRequestRetryCount set to any value by changing FTDIBUS.INF as shown in the following fragment. [FtdiBus_AddService.AddReg] HKR,Parameters,"RetryResetCount",0x10001,100 Here, the count is set to 100. MaxDevices MaxDevices is used to place a limit on the number of COM ports that can be created in a system by FTDIBUS. MaxDevices defaults to 0, meaning that the feature is disabled and FTDIBUS always attempts to create a COM port. The default can be overridden via MaxDevs in the FTDIBUS service key. Note that setting MaxDevs to a value other than zero will radically alter the behaviour of the driver; please contact FTDI if you think you have to change MaxDevs. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FTDIBUS\Parameters\MaxDevs The device can be installed with MaxDevs set to any value by changing FTDIBUS.INF as shown in the following fragment. [FtdiBus_AddService.AddReg] HKR,Parameters,"MaxDevs",0x10001,3 Here, the maximum number of devices is set to 3. Location IDs Location IDs is used to define the set of USB ports supported by FTDIBUS. It can be used in systems that require only certain USB ports to be available, perhaps in conjunction with MaxDevices. The default behaviour is that all USB ports are supported. The default can be overridden via LocIds in the FTDIBUS service key. Note that setting LocIds will radically alter the behaviour of the driver; please contact FTDI if you think you have to change LocIds. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FTDIBUS\Parameters\LocIds LocIds is a binary value that is interpreted as an array of Location IDs. A Location ID is a 32-bit unsigned integer (DWORD) that represents the location of the device in the USB tree. For example, if the driver creates a location string for the device of the form a&b&c, the location ID will be 0x00000abc. The device can be installed with LocIds set by changing FTDIBUS.INF as shown in the following fragment. [FtdiBus_AddService.AddReg] HKR,Parameters,"LocIds",1,21,00,00,00,32,00,00,00,11,00,00,00 Here, three USB ports are supported. Location ID 0x00000021 represents host controller 1 port 1. Location ID 0x00000032 represents host controller 2 port 2. Location ID 0x00000011 represents host controller 0 port 1. Location IDs can be obtained using the latest version of the utility USBView available from FTDI support. FTDI 19 January 2004

OKIDATA MICROLINE SIDM PRINTER FOR CHINA ; Windows2000 Printer Driver Installation Infomation File ; ; [Version] Signature="$Windows NT$" Provider=%PROV% ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318} Class=Printer [ClassInstall32.NT] AddReg=printer_class_addreg [printer_class_addreg] HKR,,,,%PrinterClassName% HKR,,Icon,,"-4" HKR,,Installer32,,"ntprint.dll,ClassInstall32" HKR,,NoDisplayClass,,1 ; ; Manufacturer section. ; ; This section lists all of the manufacturers ; that we will display in the Dialog box

;--------------------------------------------------------------- ; hvDriver.INF ; This file contains installation information ; for HV4000/6000/8000 series DVR card WDM Capture driver ; ; Copyright (c) 2005-2010 Goldvision Inc. ;--------------------------------------------------------------- [Version] signature="$CHICAGO$" Class=Media ClassGUID={4d36e96c-e325-11ce-bfc1-08002be10318} Provider=%Goldvision% DriverVer=12/18/2009,6.09.1230 [Manufacturer] %Goldvision%=Goldvision [DestinationDirs] GVCARD.Files = 10,system32\drivers DefaultDestDirs=10,system32\drivers [SourceDisksNames] 1=%Desc_SourceDisk%,disk1 [Goldvision] %GV6400.DeviceDesc%=gold_Inst,PCI\VEN_1B07&DEV_1204 [gold_Inst] AddReg= GVCARD.AddReg CopyFiles = GVCARD.Files KnownFiles= GVCARD.KnownFiles [gold_Inst.NT] AddReg= GVCARD.AddReg CopyFiles = GVCARD.Files [GVCARD.AddReg] HKR,,DevLoader,,*ntkern HKR,,NTMPDriver,,hvDriver.sys HKR,,PageOutWhenUnopened,3,01 HKR,Settings,VideoFormatLocked,3,09,0,0,0 ; VideoFormatLocked HKLM,"System\CurrentControlSet\Services\HV6000Drv\Parameters","VideoFormatLocked", 0x00010001, 9 [GVCARD.Files] hvDriver.sys [GVCARD.KnownFiles] hvDriver.sys=safe [gold_Inst.NT.Services] AddService = HV6000Drv,0x00000002,gold_Service_Inst, [gold_Service_Inst] DisplayName = %GV6400.DeviceDesc% ServiceType = 1 StartType = 2 ErrorControl = 1 ServiceBinary = %\hvDriver.sys [Strings] Goldvision = "Goldvision Inc." Desc_SourceDisk = "Goldvision DVR Capture card Driver Install Disk" GV6400.DeviceDesc = "HV6000SD/SC series DVR card" GV80IE.DeviceDesc = "HV8000IE series DVR card(PCIe)" GV68IE.DeviceDesc = "HV6000IE series DVR card(PCIe)"