Vendor initialization failed错误，帮忙解决啊!

蔚蓝理想 2008-01-07 09:34:48

在学习连接权限时,使用"IBLOCAL"这个数据库,设置成需要用户名与密码形式,在选择数据表时,弹出错误,如下"Vendor initialization failed.",请问是什么原因啊?能是BDE设置的事吗？

...全文

375 1 打赏收藏转发到动态举报

写回复

1 条回复

切换为时间正序

请发表友善的回复…

发表回复

ydlchina 2008-01-08

打赏
举报

回复

up

记录了网吧常见PXE启动芯片出错代码表根据出错代码判断问题

PXE启动故障PXE启动芯片出错代码表

PXE启动代码错误表，大家学习，使用网络安装技术时，可能有用。

调通sina33m下的ap6181版本大文实验室/大文哥壹捌陆捌零陆捌捌陆捌贰 wb4916 AT qq.com 完成时间：2017/7/7 18:11 版本：V1.0 SDK：Android6.0.1 开发板：SC3817R 1、关闭“设置”中的“蓝牙”选项： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\overlay\frameworks\base\core\res\res\values\config.xml （干掉这里：） "bt-pan" 2、打开WIFI，关闭BT： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\astar_d7.mk PRODUCT_PACKAGES += Launcher3 PRODUCT_PACKAGES += \ ESFileExplorer \ VideoPlayer #Bluetooth PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.camera.xml:system/etc/permissions/android.hardware.camera.xml \ frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \ frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml \ frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml #frameworks/native/data/etc/android.hardware.bluetooth.xml:system/etc/permissions/android.hardware.bluetooth.xml \ #frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml #PRODUCT_COPY_FILES += \ # device/softwinner/astar-d7/bluetooth/bt_vendor.conf:system/etc/bluetooth/bt_vendor.conf # bootanimation PRODUCT_COPY_FILES += \ device/softwinner/astar-d7/media/bootanimation.zip:system/media/bootanimation.zip # camera config for camera detector #PRODUCT_COPY_FILES += \ # device/softwinner/astar-d7/hawkview/sensor_list_cfg.ini:system/etc/hawkview/sensor_list_cfg.ini # Realtek wifi efuse map #PRODUCT_COPY_FILES += \ #device/softwinner/astar-d7/wifi_efuse_8723bs-vq0.map:system/etc/wifi/wifi_efuse_8723bs-vq0.map PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage,adb \ ro.adb.secure=0 \ ro.sys.mutedrm=true \ rw.logger=0 #$(call inherit-product-if-exists, vendor/google/products/gms_base.mk) #for 8723bs-vq0,should setmacaddr #PRODUCT_PACKAGES += setmacaddr #for 8723bs-vq0,should setbtmacaddr #PRODUCT_PACKAGES += setbtmacaddr 3、修改WIFI为AP6181： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\BoardConfig.mk # 1.2 broadcom wifi support # BOARD_USR_WIFI:ap6181/ap6210/ap6212/ap6330/ap6335 BOARD_WIFI_VENDOR := broadcom ifeq ($(BOARD_WIFI_VENDOR), broadcom) BOARD_WPA_SUPPLICANT_DRIVER := NL80211 WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_WLAN_DEVICE := bcmdhd WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path" BOARD_USR_WIFI := ap6181 include hardware/broadcom/wlan/bcmdhd/firmware/$(BOARD_USR_WIFI)/device-bcm.mk endif # 2. Bluetooth Configuration # make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor # BOARD_HAVE_BLUETOOTH_NAME:rtl8723bs/rtl8723bs_vq0/rtl8723cs/ap6210/ap6212/ap6330/ap6335/ #BOARD_HAVE_BLUETOOTH := true # #BOARD_HAVE_BLUETOOTH_BCM := true #BOARD_HAVE_BLUETOOTH_NAME := ap6212 #BOARD_HAVE_BLUETOOTH_RTK_COEX := true #BOARD_HAVE_BLUETOOTH_RTK := true #BLUETOOTH_HCI_USE_RTK_H5 := true #BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/softwinner/astar-d7/bluetooth 4、关闭BT： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\init.sun8i.rc # tp & sensors init_dev_detect # network insmod /system/vendor/modules/bcmdhd.ko #insmod /system/vendor/modules/bcm_btlpm.ko insmod /system/vendor/modules/usbnet.ko insmod /system/vendor/modules/asix.ko insmod /system/vendor/modules/qf9700.ko #insmod /system/vendor/modules/mcs7830.ko #insmod /system/vendor/modules/smsc95xx.ko insmod /system/vendor/modules/rtl8152.ko #insmod /system/vendor/modules/cdc_ether.ko # GPS # chmod 777 /system/bin/glgps # chown root system /system/bin/glgps # chmod 777 /system/lib/hw/gps.default.so # chown root system /system/lib/hw/gps.default.so # mkdir /data/gps # chmod 770 /data/gps # chown system net_bt_stack /data/gps # to observe dnsmasq.leases file for dhcp information of soft ap. chown dhcp system /data/misc/dhcp on post-fs-data mkdir /data/media 0770 media_rw media_rw # bluetooth MAC address programming #chown bluetooth net_bt_stack ro.bt.bdaddr_path #chown bluetooth net_bt_stack /system/etc/bluetooth #chown bluetooth net_bt_stack /data/misc/bluetooth #setprop ro.bt.bdaddr_path "/data/misc/bluetooth/bdaddr" # Set indication (checked by vold) that we have finished this action setprop vold.post_fs_data_done 1 # to force to start sdcard # class_start late_start # This module write data to /data should insmod in post-fs-data # due to encryption on boot chown system system /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor chmod 0660 /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor chown system system /sys/kernel/autohotplug/enable chmod 0660 /sys/kernel/autohotplug/enable chown system system /sys/devices/system/cpu/cpu0/cpufreq/boot_lock chmod 0660 /sys/devices/system/cpu/cpu0/cpufreq/boot_lock chown system system /sys/devices/platform/sunxi-budget-cooling/roomage chmod 0660 /sys/devices/platform/sunxi-budget-cooling/roomage chown system system /sys/class/devfreq/sunxi-ddrfreq/dsm/scene chmod 0660 /sys/class/devfreq/sunxi-ddrfreq/dsm/scene on charger insmod disp.ko insmod lcd.ko class_start charger write /sys/module/printk/parameters/console_suspend N write /proc/sys/kernel/printk 0 on fs # UDISK would be mounted as data partition when multiple user enabled. #format_userdata /dev/block/by-name/UDISK ASTAR #bluesleep #insmod /system/vendor/modules/rtl_bluesleep.ko ## bluetooth ## UART device #chmod 0660 /dev/ttyS1 #chown bluetooth net_bt_stack /dev/ttyS1 # ## power up/down interface #chmod 0660 /sys/class/rfkill/rfkill0/state #chmod 0660 /sys/class/rfkill/rfkill0/type #chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/state #chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/type # # ## bluetooth LPM #chmod 0220 /proc/bluetooth/sleep/lpm #chmod 0220 /proc/bluetooth/sleep/btwrite #chown bluetooth net_bt_stack /proc/bluetooth/sleep/lpm #chown bluetooth net_bt_stack /proc/bluetooth/sleep/btwrite #write /proc/bluetooth/sleep/lpm 1 5、可选： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\ueventd.sun8i.rc #/dev/video1 0777 media media /dev/snd/pcmC0D0c 0777 media media /dev/snd/pcmC0D0p 0777 media media #/dev/ttyS1 0660 bluetooth bluetooth 6、可选： R:\wyb\ap6181_sina33m_sc3817r\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml 1800000 true 7、请严重注意，全志在这里埋坑了！（坑爹无敌！） Android里面调入配置文件：nvram.txt，里面里面调入：nvram_ap6181.txt。 R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\config.txt R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\device-bcm.mk # # Copyright (C) 2008 The Android Open Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # -include hardware/broadcom/wlan/bcmdhd/config/config-bcm.mk WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40181a2.bin" WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40181a2_p2p.bin" WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40181a2_apsta.bin" PRODUCT_COPY_FILES += \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/fw_bcm40181a2_p2p.bin:system/vendor/modules/fw_bcm40181a2_p2p.bin \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/fw_bcm40181a2_apsta.bin:system/vendor/modules/fw_bcm40181a2_apsta.bin \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/fw_bcm40181a2.bin:system/vendor/modules/fw_bcm40181a2.bin \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/nvram_ap6181.txt:system/vendor/modules/nvram_ap6181.txt \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/config.txt:system/vendor/modules/config.txt R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\fw_bcm40181a2.bin R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\fw_bcm40181a2_apsta.bin R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\fw_bcm40181a2_p2p.bin R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\nvram_ap6181.txt 8、可选： R:\wyb\ap6181_sina33m_sc3817r\android\packages\apps\Camera2\src\com\android\camera\CameraActivity.java 9、可选： R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\arch\arm\mach-sunxi\rf\bt_pm.c static int rfkill_set_power(void *data, bool blocked) { unsigned int mod_sel = wifi_pm_get_mod_type(); RF_MSG("rfkill set power %d\n", blocked); switch (mod_sel) { case 2: /* ap6210 */ if (!blocked) { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 1); } else { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 0); } break; case 4: /* realtek rtl8723au */ if (!blocked) { wifi_pm_gpio_ctrl("rtl8723au_bt", 1); } else { wifi_pm_gpio_ctrl("rtl8723au_bt", 0); } break; case 5: /* realtek rtl8723bs */ if (!blocked) { wifi_pm_gpio_ctrl("rtl8723bs_bt_regon", 1); } else { wifi_pm_gpio_ctrl("rtl8723bs_bt_regon", 0); } break; case 7: /* ap6476 */ if (!blocked) { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 1); } else { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 0); } break; case 9: /* ap6212 */ if (!blocked) { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 1); } else { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 0); } break; default: RF_MSG("no bt module matched !!\n"); } msleep(10); return 0; } 10、可选： R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\arch\arm\mach-sunxi\rf\wifi_pm.c struct wifi_pm_ops wifi_select_pm_ops; static char* wifi_mod[] = {" ", "ap6181", /* 1 - AP6181*/ "ap6210", /* 2 - AP6210*/ "rtl8188eu", /* 3 - RTL8188EU*/ "rtl8723au", /* 4 - RTL8723AU*/ "rtl8723bs", /* 5 - RTL8723BS*/ "esp8089", /* 6 - ESP8089*/ "ap6476", /* 7 - AP6476*/ "rtl8189es", /* 8 - rtl8189es*/ "ap6212", /* 9 - AP6212*/ "ap6330", /* 10- AP6330*/ "gb9663", /* 11- GB9663*/ }; static int __devinit wifi_pm_probe(struct platform_device *pdev) { struct wifi_pm_ops *ops = &wifi_select_pm_ops; switch (ops->module_sel.val) { case 1: /* AP6181 */ ap6xxx_gpio_init(); break; case 2: /* AP6210 */ ap6xxx_gpio_init(); break; case 3: /* RTL8188EU */ rtl8188eu_gpio_init(); break; case 4: /* RTL8723AU */ rtl8723au_gpio_init(); break; case 5: /* RTL8723BS */ rtl8723bs_gpio_init(); break; case 6: /* ESP8089 */ esp8089_gpio_init(); break; case 7: /* AP6476 */ ap6xxx_gpio_init(); break; case 8: /* rtl8189es */ rtl8189es_gpio_init(); break; case 9: /* AP6212 */ ap6xxx_gpio_init(); break; default: wifi_pm_msg("wrong sdio module select %d !\n", ops->module_sel.val); } awwifi_procfs_attach(); wifi_pm_msg("wifi gpio init is OK !!\n"); return 0; } 11、可选： R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\include\bcmdevs.h #define BCM4350_CHIP_ID 0x4350 #define BCM43430_CHIP_ID 43430 /* 43430 chipcommon chipid 0xa9a6 */ #define BCM4342_CHIP_ID 4342 R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_common.c void dhd_common_init(osl_t *osh) { int select_type = 0; //aw checkout which wifi had select //select_type = wifi_pm_get_mod_type(); select_type = 1; #ifdef CONFIG_BCMDHD_FW_PATH //select ap6181 or ap6210 or ap6476 if (select_type == 1 || select_type == 2 || select_type == 7) { bcm_strncpy_s(fw_path, sizeof(fw_path), "/system/vendor/modules/fw_bcm40181a2.bin", MOD_PARAM_PATHLEN-1); } #else /* CONFIG_BCMDHD_FW_PATH */ fw_path[0] = '\0'; #endif /* CONFIG_BCMDHD_FW_PATH */ #ifdef CONFIG_BCMDHD_NVRAM_PATH switch (select_type) { //ap6181 case 1: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram_ap6181.txt", MOD_PARAM_PATHLEN-1); break; //ap6210 case 2: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram_ap6210.txt", MOD_PARAM_PATHLEN-1); break; //ap6476 case 7: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram_ap6476.txt", MOD_PARAM_PATHLEN-1); break; //ap6212 case 9: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram.txt", MOD_PARAM_PATHLEN-1); break; default: break; } #else /* CONFIG_BCMDHD_NVRAM_PATH */ nv_path[0] = '\0'; #endif /* CONFIG_BCMDHD_NVRAM_PATH */ #ifdef CONFIG_BCMDHD_CONFIG_PATH bcm_strncpy_s(conf_path, sizeof(conf_path), "/system/vendor/modules/config.txt", MOD_PARAM_PATHLEN-1); #else /* CONFIG_BCMDHD_CONFIG_PATH */ conf_path[0] = '\0'; #endif /* CONFIG_BCMDHD_CONFIG_PATH */ #ifdef SOFTAP fw_path2[0] = '\0'; #endif } R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_linux.c int dhd_bus_start(dhd_pub_t *dhdp) { int ret = -1; dhd_info_t *dhd = (dhd_info_t*)dhdp->info; unsigned long flags; ASSERT(dhd); DHD_TRACE(("Enter %s:\n", __FUNCTION__)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdlock(dhdp); #endif /* DHDTHREAD */ /* try to download image and nvram to the dongle */ if ((dhd->pub.busstate == DHD_BUS_DOWN) && (fw_path[0] != '\0') && (nv_path[0] != '\0')) { #ifdef SHOW_NVRAM_TYPE { /* Show nvram type in the kernel log */ int i; for (i = 0; nv_path[i] != '\0'; ++i) { if (nv_path[i] == '.') { ++i; break; } } DHD_ERROR(("%s: nvram_type = [%s]\n", __FUNCTION__, &nv_path[i])); } #endif /* SHOW_NVRAM_TYPE */ /* wake lock moved to dhdsdio_download_firmware */ if (!(dhd_bus_download_firmware(dhd->pub.bus, dhd->pub.osh, fw_path, nv_path, conf_path))) { DHD_ERROR(("%s: dhdsdio_probe_download failed. firmware = %s nvram = %s config = %s\n", __FUNCTION__, fw_path, nv_path, conf_path)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ // 2017/6/23 18:40 wenyuanbo download ap6212 fail not return error!!!! //return -1; } } if (dhd->pub.busstate != DHD_BUS_LOAD) { #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ return -ENETDOWN; } /* Start the watchdog timer */ dhd->pub.tickcnt = 0; dhd_os_wd_timer(&dhd->pub, dhd_watchdog_ms); /* Bring up the bus */ if ((ret = dhd_bus_init(&dhd->pub, FALSE)) != 0) { DHD_ERROR(("%s, dhd_bus_init failed %d\n", __FUNCTION__, ret)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ return ret; } bcmsdh_set_drvdata(dhdp); // terence 20130427: fix for null pointer issue #if defined(OOB_INTR_ONLY) /* Host registration for OOB interrupt */ if (bcmsdh_register_oob_intr(dhdp)) { /* deactivate timer and wait for the handler to finish */ flags = dhd_os_spin_lock(&dhd->pub); dhd->wd_timer_valid = FALSE; dhd_os_spin_unlock(&dhd->pub, flags); del_timer_sync(&dhd->timer); DHD_ERROR(("%s Host failed to register for OOB\n", __FUNCTION__)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ DHD_OS_WD_WAKE_UNLOCK(&dhd->pub); return -ENODEV; } /* Enable oob at firmware */ dhd_enable_oob_intr(dhd->pub.bus, TRUE); #endif /* If bus is not ready, can't come up */ if (dhd->pub.busstate != DHD_BUS_DATA) { flags = dhd_os_spin_lock(&dhd->pub); dhd->wd_timer_valid = FALSE; dhd_os_spin_unlock(&dhd->pub, flags); del_timer_sync(&dhd->timer); DHD_ERROR(("%s failed bus is not ready\n", __FUNCTION__)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ DHD_OS_WD_WAKE_UNLOCK(&dhd->pub); return -ENODEV; } #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ dhd_process_cid_mac(dhdp, TRUE); /* Bus is ready, do any protocol initialization */ if ((ret = dhd_prot_init(&dhd->pub)) < 0) return ret; dhd_process_cid_mac(dhdp, FALSE); #ifdef ARP_OFFLOAD_SUPPORT if (dhd->pend_ipaddr) { #ifdef AOE_IP_ALIAS_SUPPORT aoe_update_host_ipv4_table(&dhd->pub, dhd->pend_ipaddr, TRUE, 0); #endif /* AOE_IP_ALIAS_SUPPORT */ dhd->pend_ipaddr = 0; } #endif /* ARP_OFFLOAD_SUPPORT */ return 0; } R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_sdio.c static bool dhdsdio_chipmatch(uint16 chipid) { if (chipid == BCM4325_CHIP_ID) return TRUE; if (chipid == BCM4329_CHIP_ID) return TRUE; if (chipid == BCM4315_CHIP_ID) return TRUE; if (chipid == BCM4319_CHIP_ID) return TRUE; if (chipid == BCM4336_CHIP_ID) return TRUE; if (chipid == BCM4330_CHIP_ID) return TRUE; if (chipid == BCM43237_CHIP_ID) return TRUE; if (chipid == BCM43362_CHIP_ID) return TRUE; if (chipid == BCM4314_CHIP_ID) return TRUE; if (chipid == BCM43242_CHIP_ID) return TRUE; if (chipid == BCM43340_CHIP_ID) return TRUE; if (chipid == BCM43341_CHIP_ID) return TRUE; if (chipid == BCM43143_CHIP_ID) return TRUE; if (chipid == BCM43342_CHIP_ID) return TRUE; if (chipid == BCM4334_CHIP_ID) return TRUE; if (chipid == BCM43239_CHIP_ID) return TRUE; if (chipid == BCM4324_CHIP_ID) return TRUE; if (chipid == BCM4335_CHIP_ID) return TRUE; if (chipid == BCM4339_CHIP_ID) return TRUE; if (chipid == BCM4350_CHIP_ID) return TRUE; if (chipid == BCM43430_CHIP_ID) return TRUE; return FALSE; } R:\wyb\ap6181_sina33m_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\d7\sys_config.fex [power_sply] dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo1_vol = 3300 aldo2_vol = 2500 aldo3_vol = 3000 dldo1_vol = 3300 dldo2_vol = 3300 dldo3_vol = 2800 ;gpio0_vol = 2800 ldoio0_vol = 2800 [jtag_para] jtag_enable = 0 ;***************************************************************************** ;sdram configuration ; ;***************************************************************************** [dram_para] dram_clk = 552 [wakeup_src_para] cpu_en = 0 cpu_freq = 48 ; (cpu:apb:ahb) pll_ratio = 0x111 dram_selfresh_en= 1 dram_freq = 36 wakeup_src_wl = port:PL07<4><0> ;wakeup_src_bt = port:PL09<4><0> ;bb_wake_ap = port:PL02<4><0> [uart0] uart_used = 1 uart_port = 0 uart_type = 2 uart_tx = port:PF02<3><1> uart_rx = port:PF04<3><1> ;---------------------------------------------------------------------------------- ;capacitor tp configuration ;ctp_twi_id : twi controller ID ;ctp_twi_addr : I2C slave address, 7bit ;ctp_screen_max_x/_y : resolution of touch panel ;ctp_revert_x/_y_flag : whether need to revert x/y ;ctp_exchange_x_y_flag: whether need to exchange the value of x and y ;ctp_int_port : port for tp's interrupt signal ;ctp_wakeup : port for wakeup tp ;---------------------------------------------------------------------------------- [ctp_para] ctp_used = 1 ctp_name = "gt82x" ctp_twi_id = 0 ctp_twi_addr = 0x5d ctp_screen_max_x = 1280 ctp_screen_max_y = 800 ctp_revert_x_flag = 1 ctp_revert_y_flag = 1 ctp_exchange_x_y_flag = 1 ctp_int_port = port:PL04<4> ctp_wakeup = port:PL03<1><1> ctp_power_ldo = ctp_power_ldo_vol = ctp_power_io = ;-------------------------------------------------------------------------------- ; CTP automatic detection configuration ;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused ;Module name postposition 1 said detection, 0 means no detection. ;-------------------------------------------------------------------------------- [ctp_list_para] ctp_det_used = 1 ft5x_ts = 1 gt82x = 1 gslX680 = 1 gslX680new = 0 gt9xx_ts = 1 gt9xxf_ts = 0 tu_ts = 0 gt818_ts = 1 zet622x = 1 aw5306_ts = 1 icn83xx_ts = 0 [motor_para] motor_used = 0 ;---------------------------------------------------------------------------------- ;lcd0 configuration ;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp; 6:extend dsi ;lcd_x: lcd horizontal resolution ;lcd_y: lcd vertical resolution ;lcd_width: width of lcd in mm ;lcd_height: height of lcd in mm ;lcd_dclk_freq: in MHZ unit ;lcd_pwm_freq: in HZ unit ;lcd_pwm_pol: lcd backlight PWM polarity ;lcd_pwm_max_limit lcd backlight PWM max limit(<=255) ;lcd_hbp: hsync back porch ;lcd_ht: hsync total cycle ;lcd_vbp: vsync back porch ;lcd_vt: vysnc total cycle ;lcd_hspw: hsync plus width ;lcd_vspw: vysnc plus width ;lcd_lvds_if: 0:single link; 1:dual link ;lcd_lvds_colordepth: 0:8bit; 1:6bit ;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode ;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither ;lcd_io_phase: 0:noraml; 1:intert phase(0~3bit: vsync phase; 4~7bit:hsync phase; ; 8~11bit:dclk phase; 12~15bit:de phase) ;lcd_gamma_en lcd gamma correction enable ;lcd_bright_curve_en lcd bright curve correction enable ;lcd_cmap_en lcd color map function enable ;deu_mode 0:smoll lcd screen; 1:large lcd screen(larger than 10inch) ;lcdgamma4iep: Smart Backlight parameter, lcd gamma vale * 10; ; decrease it while lcd is not bright enough; increase while lcd is too bright ;smart_color 90:normal lcd screen 65:retina lcd screen(9.7inch) ;---------------------------------------------------------------------------------- [lcd0_para] lcd_used = 1 lcd_driver_name = "default_lcd" lcd_if = 3 lcd_x = 1280 lcd_y = 800 lcd_width = 150 lcd_height = 94 lcd_dclk_freq = 71 lcd_pwm_used = 1 lcd_pwm_ch = 0 lcd_pwm_freq = 50000 lcd_pwm_pol = 1 lcd_hbp = 20 lcd_ht = 1418 lcd_hspw = 10 lcd_vbp = 10 lcd_vt = 830 lcd_vspw = 5 lcd_lvds_if = 0 lcd_lvds_colordepth = 1 lcd_lvds_mode = 0 lcd_frm = 1 lcd_gamma_en = 0 lcd_bright_curve_en = 0 lcd_cmap_en = 0 deu_mode = 0 lcdgamma4iep = 22 smart_color = 90 lcd_bl_en = port:PD13<1><0><1> ;ap6xxx_wl_regon = port:PL06<1><0> ;lcd_bl_en = port:PL06<1><0><1> lcd_power = "axp22_dc1sw" lcdd0 = port:PD18<3><0> lcdd1 = port:PD19<3><0> lcdd2 = port:PD20<3><0> lcdd3 = port:PD21<3><0> lcdd4 = port:PD22<3><0> lcdd5 = port:PD23<3><0> lcdd6 = port:PD24<3><0> lcdd7 = port:PD25<3><0> lcdd8 = port:PD26<3><0> lcdd9 = port:PD27<3><0> ;---------------------------------------------------------------------------------- ;pwm config ;---------------------------------------------------------------------------------- [pwm0_para] pwm_used = 0 pwm_positive = port:PH00<2><0> [pwm1_para] pwm_used = 1 pwm_positive = port:PH01<2><0> [usbc0] usb_used = 1 usb_port_type = 2 usb_detect_type = 1 usb_id_gpio = port:PD10<0><1> usb_det_vbus_gpio = "axp_ctrl" usb_drv_vbus_gpio = port:power4<1><0><0> usb_restrict_gpio = usb_host_init_state = 0 usb_restric_flag = 0 usb_restric_voltage = 3550000 usb_restric_capacity= 5 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_regulator_id_vbus = "axp22_dcdc1" usb_regulator_id_vbus_vol = 3000000 [usbc1] usb_used = 1 usb_drv_vbus_gpio = port:PD12<1><0><0> usb_restrict_gpio = usb_host_init_state = 1 usb_restric_flag = 0 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0 ;-------------------------------------------------------------------------------- ;wifi/bt/fm/gps/nfc modules configuration ;module_num: ; 0- none ; 1- ap6181(wifi) ; 2- ap6210(wifi+bt) ; 3- rtl8188eu(wifi) ; 4- rtl8723au(wifi+bt) ; 5- rtl8723bs(wifi+bt) ; 6- esp8089(wifi) ; 7- ap6476(wifi+bt+fm+gps) ; 8- rtl8189es(wifi) ; 9- ap6212(wifi+bt+fm) ; 10- ap6330(wifi+bt+fm) ; 11- gb9663(wifi+bt+fm) ;module_power1: ""- bat, "axp_dldo1"- axp dldo1 ;module_power1_vol: power1 voltage, mv; not used for module_power1 is "" ;module_power2: ""- bat, "axp_dldo2"- axp dldo2 ;module_power2_vol: power2 voltage, mv; not used for module_power2 is "" ;module_power3: ""- bat, "axp_dldo2"- axp dldo2 ;module_power3_vol: power3 voltage, mv; not used for module_power3 is "" ;power_switch: module power switch io when bat supply ;chip_en: enable chip io ;lpo_use_apclk: ""- not use, "losc_out"- a23/33, "ac10032k1"、"ac10032k2"、"ac10032k3"- a80/a83 ;-------------------------------------------------------------------------------- [rf_para] module_num = 1 module_power1 = "axp22_aldo1" module_power1_vol = 3000000 module_power2 = "" module_power2_vol = 3000000 module_power3 = "" module_power3_vol = 3000000 power_switch = chip_en = lpo_use_apclk = "losc_out" ;-------------------------------------------------------------------------------- ;wifi configuration ;wifi_used: 0-not use, 1- use ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2 ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) ;wl_reg_on: wifi function enable io ;wl_host_wake: wifi device wake-up host ;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 1 wifi_usbc_type = 1 wifi_mod_sel = 1 wifi_power = "" wifi_power_ext1 = "" wifi_power_ext2 = "" ; 1 - ap6181 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06<1><0> ;ap6xxx_wl_host_wake = port:PL07<4><0> ;ap6xxx_lpo_use_apclk = 1 ; 2 - ap6210 sdio wifi gpio config ap6xxx_wl_regon = port:PL06<1><0> ap6xxx_wl_host_wake = port:PL07<4><0> ;ap6xxx_bt_regon = port:PL08<1><0> ;ap6xxx_bt_wake = port:PL10<1><0> ;ap6xxx_bt_host_wake = port:PL09<4><0> ap6xxx_lpo_use_apclk = 1 ; 3 - rtl8188eu usb wifi gpio conifg ; 4 - rtl8723au usb wifi + bt ; 5 - rtl8723bs sdio wifi + bt ;rtl8723bs_chip_en = port:PL11<1><0> ;rtl8723bs_wl_regon = port:PL06<1><0> ;rtl8723bs_wl_host_wake = port:PL07<4><0> ;rtl8723bs_bt_regon = port:PL08<1><0> ;rtl8723bs_bt_wake = port:PL10<1><0> ;rtl8723bs_bt_host_wake = port:PL09<4><0> ;rtl8723bs_lpo_use_apclk = 0 ; 6 - eagle sdio wifi ;esp_wl_chip_en = port:PL03<1><0> ;esp_wl_rst = port:PL02<1><0> ; 7 - ap6476 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06<1><0> ;ap6xxx_wl_host_wake = port:PL07<4><0> ;ap6xxx_bt_regon = port:PL08<1><0> ;ap6xxx_bt_wake = port:PL10<1><0> ;ap6xxx_bt_host_wake = port:PL09<4><0> ;ap6xxx_lpo_use_apclk = 1 ; 8 - rtl8189es sdio wifi gpio conifg ;rtl8189es_shdn = port:PL06<1><0> ;rtl8189es_host_wake = port:PL07<4><0> usb_vbus_power_ctrl = port:PL11<1><1> usb_eth_power_ctrl = port:PL04<1><1> ;-------------------------------------------------------------------------------- ;bluetooth configuration ;bt_used: 0- no used, 1- used ;bt_uard_id: 0- uart0, 1- uart1, 2- uart2 ;bt_rst_n: bt function enable io ;bt_wake: host wake-up bluetooth device ;bt_wak_host: bt device wake-up host ;bt_wake_invert: whether bt_wake use inverter between ap and module ; 0: not used, 1: used ;bt_host_wake_invert: whether bt_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [bt_para] bt_used = 0 bt_uart_id = 1 bt_rst_n = port:PL08<1><0> bt_wake = port:PL10<1><0> bt_host_wake = port:PL09<4><0> bt_wake_invert = 0 bt_host_wake_invert = 0 ls_int = port:PB07<1><0> pcm_ch = port:PB05<1><0> [gy_list_para] gy_det_used = 0 [ls_list_para] ls_det_used = 0 power_start = 3 pmu_temp_enable = 0

旧版本版本的全志R16平台的tinav2.1的系统打开softAP 2017/9/14 17:25 版本：V1.0 1、原始编译： rootroot@cm-System-Product-Name:~$ cd /home/wwt/ rootroot@cm-System-Product-Name:/home/wwt$ tar zxvf tinaV2.1_wyb_20170302_patch_leo_20161102.tar.gz rootroot@cm-System-Product-Name:/home/wwt$ mv tinaV2.1 softap_ap6212a0_tinav2.1 rootroot@cm-System-Product-Name:/home/wwt$ cd softap_ap6212a0_tinav2.1/ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ source build/envsetup.sh including target/allwinner/tulip-d1/vendorsetup.sh including target/allwinner/octopus-sch/vendorsetup.sh including target/allwinner/azalea-perf2/vendorsetup.sh including target/allwinner/azalea-perf3/vendorsetup.sh including target/allwinner/octopus-dev/vendorsetup.sh including target/allwinner/astar-evb/vendorsetup.sh including target/allwinner/generic/vendorsetup.sh including target/allwinner/azalea-perf1/vendorsetup.sh including target/allwinner/astar-parrot/vendorsetup.sh including target/allwinner/astar-spk/vendorsetup.sh including target/allwinner/azalea-evb/vendorsetup.sh rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ lunch You're building on Linux Lunch menu... pick a combo: 1. tulip_d1-tina 2. tulip_d1-dragonboard 3. octopus_sch-tina 4. octopus_sch-dragonboard 5. azalea_perf2-tina 6. azalea_perf2-dragonboard 7. azalea_perf3-tina 8. azalea_perf3-dragonboard 9. octopus_dev-tina 10. octopus_dev-dragonboard 11. astar_evb-tina 12. azalea_perf1-tina 13. azalea_perf1-dragonboard 14. astar_parrot-tina 15. astar_parrot-dragonboard 16. astar_spk-tina 17. astar_spk-dragonboard 18. azalea_evb-tina 19. azalea_evb-dragonboard Which would you like?14 ============================================ PLATFORM_VERSION_CODENAME=Neptune PLATFORM_VERSION=2.0.0 TARGET_PRODUCT=astar_parrot TARGET_BUILD_VARIANT=tina TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a-neon TARGET_CPU_VARIANT=cortex-a7 TARGET_2ND_ARCH= TARGET_2ND_ARCH_VARIANT= TARGET_2ND_CPU_VARIANT= HOST_ARCH=x86_64 HOST_OS=linux HOST_OS_EXTRA=Linux-3.13.0-24-generic-x86_64-with-Ubuntu-14.04-trusty HOST_BUILD_TYPE=release BUILD_ID=57513AA3 OUT_DIR= ============================================ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j12 rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ pack -d 2、将softap.tar.bz2解压到package/allwinner下。将dnsmasq.tar.bz2解压并替换package/network/services下的dnsmasq文件夹。 3、配置内核： rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make kernel_menuconfig [*] Networking support ---> --- Networking support Networking options ---> （在第二屏） [ ] Network packet filtering framework (Netfilter) ---> 修改为： [*] Network packet filtering framework (Netfilter) ---> [ ] Advanced netfilter configuration 修改为： [*] Advanced netfilter configuration Core Netfilter Configuration ---> < > Netfilter NFACCT over NFNETLINK interface < > Netfilter NFQUEUE over NFNETLINK interface < > Netfilter LOG over NFNETLINK interface < > Netfilter connection tracking support < > Netfilter Xtables support (required for ip_tables) 修改为： < > Netfilter NFACCT over NFNETLINK interface < > Netfilter NFQUEUE over NFNETLINK interface < > Netfilter LOG over NFNETLINK interface <*> Netfilter connection tracking support [*] Connection mark tracking support [*] Connection tracking security mark support (NEW) （默认选中） [*] Supply CT list in procfs (OBSOLETE) [*] Connection tracking events [*] Connection tracking timeout (NEW) [*] Connection tracking timestamping < > DCCP protocol connection tracking support (EXPERIMENTAL) < > SCTP protocol connection tracking support (EXPERIMENTAL) < > UDP-Lite protocol connection tracking support < > Amanda backup protocol support < > FTP protocol support < > H.323 protocol support < > IRC protocol support < > NetBIOS name service protocol support < > SNMP service protocol support < > PPtP protocol support < > SANE protocol support (EXPERIMENTAL) < > SIP protocol support < > TFTP protocol support Connection tracking netlink interface Connection tracking timeout tuning via Netlink <*> Netfilter Xtables support (required for ip_tables) *** Xtables combined modules *** （有很多项，在下面！） <*> "conntrack" connection tracking match support <*> "state" match support < > IP virtual server support ---> 修改为： <*> IP virtual server support ---> [ ] Netfilter connection tracking (NEW) 修改为（在最后面）： [*] Netfilter connection tracking IP: Netfilter Configuration ---> < > IPv4 connection tracking support (required for NAT) 修改为： <*> IPv4 connection tracking support (required for NAT) < > IP tables support (required for filtering/masq/NAT) 修改为： <*> IP tables support (required for filtering/masq/NAT) <*> Packet filtering < > Full NAT 修改为: <*> Full NAT <*> MASQUERADE target support <*> NETMAP target support <*> REDIRECT target support <*> Packet mangling 4、配置系统： rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make menuconfig Base system ---> < > dnsmasq.............................................. DNS and DHCP server 修改为： <*> dnsmasq.............................................. DNS and DHCP server Allwinner ---> < > softap............................................... Tina softap manager (NEW) ---- 修改为： <*> softap............................................... Tina softap manager ---> --- softap............................................... Tina softap manager < > softap-demo......................................... Tina softap app demo (NEW) 修改为： <*> softap-demo......................................... Tina softap app demo Network ---> Firewall ---> < > iptables................................. IP firewall administration tool ---- 修改为：（里面不用选中） <*> iptables................................. IP firewall administration tool ---> Network ---> < > hostapd................................. IEEE 802.1x Authenticator (full) < > hostapd-common............... hostapd/wpa_supplicant common support files < > hostapd-common-old 修改为： <*> hostapd................................. IEEE 802.1x Authenticator (full) -*- hostapd-common............... hostapd/wpa_supplicant common support files < > hostapd-common-old Utilities ---> <*> playdemo................................... music play in 3 kinds of mode 修改为： < > playdemo................................... music play in 3 kinds of mode 5、配置编译加载选项： rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ find . -name netfilter.mk ./package/kernel/linux/modules/netfilter.mk ./build/netfilter.mk rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ W:\softap_ap6212a0_tinav2.1\build\netfilter.mk $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)xt_LOG)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)nf_log_common)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_V4)nf_log_ipv4)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_TCPMSS, $(P_XT)xt_TCPMSS)) $(eval $(call nf_add,IPT_CORE,CONFIG_IP_NF_TARGET_REJECT, $(P_V4)ipt_REJECT)) $(eval $(call nf_add,IPT_CORE,CONFIG_IP_NF_TARGET_REJECT, $(P_V4)nf_reject_ipv4)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MATCH_TIME, $(P_XT)xt_time)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MARK, $(P_XT)xt_mark)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)xt_LOG)) #$(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)nf_log_common)) #$(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_V4)nf_log_ipv4)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_TCPMSS, $(P_XT)xt_TCPMSS)) $(eval $(call nf_add,IPT_CORE,CONFIG_IP_NF_TARGET_REJECT, $(P_V4)ipt_REJECT)) #$(eval $(call nf_add,IPT_CORE,CONFIG_IP_NF_TARGET_REJECT, $(P_V4)nf_reject_ipv4)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MATCH_TIME, $(P_XT)xt_time)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MARK, $(P_XT)xt_mark)) 不配置这里就会在这里让你选择（选择：N/y都会出错的！） rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j12 make -C /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39 HOSTCFLAGS="-O2 -I/home/wwt/softap_ap6212a0_tinav2.1/out/host/include -I/home/wwt/softap_ap6212a0_tinav2.1/out/host/usr/include -Wall -Wmissing-prototypes -Wstrict-prototypes" CROSS_COMPILE="arm-openwrt-linux-muslgnueabi-" ARCH="arm" KBUILD_HAVE_NLS=no KBUILD_BUILD_USER="" KBUILD_BUILD_HOST="" CONFIG_SHELL="bash" V='' CC="arm-openwrt-linux-muslgnueabi-gcc" modules make[5]: Entering directory `/home/wwt/softap_ap6212a0_tinav2.1/lichee/linux-3.4' scripts/kconfig/conf --silentoldconfig Kconfig drivers/net/wireless/bcmdhd/Kconfig:57:warning: defaults for choice values not supported .config:3733:warning: override: TREE_PREEMPT_RCU changes choice state * * Restart config... * * * IP: Netfilter Configuration * IPv4 connection tracking support (required for NAT) (NF_CONNTRACK_IPV4) [Y/n/m/?] y proc/sysctl compatibility with old connection tracking (NF_CONNTRACK_PROC_COMPAT) [N/y/?] n IP Userspace queueing via NETLINK (OBSOLETE) (IP_NF_QUEUE) [N/m/y/?] n IP tables support (required for filtering/masq/NAT) (IP_NF_IPTABLES) [Y/n/m/?] y "ah" match support (IP_NF_MATCH_AH) [N/m/y/?] n "ecn" match support (IP_NF_MATCH_ECN) [N/m/y/?] n "rpfilter" reverse path filter match support (IP_NF_MATCH_RPFILTER) [N/m/y/?] n "ttl" match support (IP_NF_MATCH_TTL) [N/m/y/?] n Packet filtering (IP_NF_FILTER) [Y/n/m/?] y REJECT target support (IP_NF_TARGET_REJECT) [M/n/y/?] m Force socket error when rejecting with icmp* (IP_NF_TARGET_REJECT_SKERR) [N/y/?] (NEW) n 出错： sh /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/strace-4.10/ipkg-sunxi/strace rstrip.sh: /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/strace-4.10/ipkg-sunxi/strace/usr/bin/strace: executable \$0 \$@"; ) > postinst; ( echo "#!/bin/sh"; echo ". \${IPKG_INSTROOT}/lib/functions.sh"; echo "default_prerm \$0 \$@"; ) > prerm; chmod 0755 postinst prerm; ) install -d -m0755 /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/packages/base unxi/strace /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/packages/base av2.1/out/astar-parrot/packages/base/strace_4.10-1_sunxi.ipk rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-strace strace install -d -m0755 /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-strace/usr/bin v2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-strace/usr/bin/ me/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-strace touch /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.strace_installed /rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/strace.default.install make[3]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/package/devel/strace' make[2]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1' make[1]: *** [/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1' Build failed - please re-run with -j1 to see the real error message make: *** [world] 错误 1 #### make failed to build some targets (36:27 (mm:ss)) #### rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ make -j1 rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-ap6212-firmware touch /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.ap6212-firmware_installed ; echo "ap6212-firmware" >> /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux-firmware.default.install make[3]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/package/firmware/linux-firmware' make[3]: Entering directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/package/kernel/linux' rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kernel kernel # nothing to do me/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kernel touch /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.kernel_installed diron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-input-core kmod-input-core NOTICE: module '/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39/drivers/input/input-core.ko' is built-in. ONTROL/postinst-pkg; chmod 0755 /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-input-core/CONTROL/postinst-pkg; fi ore/. /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-input-core touch /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.kmod-input-core_installed /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install unxi/kmod-ipt-core/CONTROL /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo ERROR: module '/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39/net/netfilter/nf_log_common.ko' is missing. make[3]: *** [/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/packages/kernel/kmod-ipt-core_3.4.39-1_sunxi.ipk] Error 1 make[3]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/package/kernel/linux' make[2]: *** [package/kernel/linux/compile] Error 2 make[2]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1' make[1]: *** [/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1' make: *** [world] 错误 2 #### make failed to build some targets (16 seconds) #### rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ grep nf_log_common . -R grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39/.git/svn: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/host/u-boot-2014.10/arch/sandbox/include/asm/arch: 没有那个文件或目录 grep: ./build/.git/svn: 没有那个文件或目录 ./build/netfilter.mk:$(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)nf_log_common)) grep: ./package/.git/svn: 没有那个文件或目录 grep: ./target/.git/svn: 没有那个文件或目录 grep: ./.repo/manifests/.git/svn: 没有那个文件或目录 grep: ./tools/.git/svn: 没有那个文件或目录 grep: ./tools/.git/packed-refs: 没有那个文件或目录 grep: ./config/.git/svn: 没有那个文件或目录 grep: ./lichee/linux-3.4/.git/svn: 没有那个文件或目录 grep: ./lichee/brandy/.git/svn: 没有那个文件或目录 grep: ./scripts/.git/svn: 没有那个文件或目录 grep: ./dl/.git/svn: 没有那个文件或目录 grep: ./docs/.git/svn: 没有那个文件或目录 grep: ./prebuilt/.git/svn: 没有那个文件或目录 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib32/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib32/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/arm-openwrt-linux-muslgnueabi/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib64/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib32/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/arm-openwrt-linux/lib/lib: 符号连接的层数过多 grep: ./toolchain/.git/svn: 没有那个文件或目录 rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ make -j12 还会出现的错误： rm -rf /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common mkdir -p /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common install -d -m0755 /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common/lib/netifd install -m0644 ./files/netifd.sh /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common/lib/netifd/hostapd.sh SHELL= flock /home/wwt/softap_ap6212a0_tinav2.1/tmp/.root-copy.flock -c 'cp -fpR /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common/. /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common touch /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.hostapd-common_installed if [ -f /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/hostapd.supplicant-full.install.clean ]; then rm -f /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/hostapd.supplicant-full.install /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/hostapd.supplicant-full.install.clean; fi; echo "hostapd-common" >> /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/hostapd.supplicant-full.install make[3]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1/package/network/services/hostapd' make[2]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' make[1]: *** [/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' Build failed - please re-run with -j1 to see the real error message make: *** [world] 错误 1 #### make failed to build some targets (01:19 (mm:ss)) #### rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j1 or -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-install/usr/include -L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib -L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/lib -L/home/wwt/softap_ap6212a0_tinav2.1/prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/usr/lib -L/home/wwt/softap_ap6212a0_tinav2.1/prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib -znow -zrelro -L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-install/usr/lib -lsoftap -lssl /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `ECDSA_sign' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_copy' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_set_public_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_free' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_get0_public_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_get0_private_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_oct2point' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_up_ref' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_curve_nist2nid' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_generate_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_set_private_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_new_by_curve_name' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_get0_group' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_method_of' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_METHOD_get_field_type' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_point2oct' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_get_curve_name' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_get_conv_form' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_free' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_new' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_get_degree' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_set_group' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `ECDSA_verify' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EVP_PKEY_set1_EC_KEY' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_free' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_new' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `ECDH_compute_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_dup' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_new_by_curve_name' collect2: error: ld returned 1 exit status make[4]: *** [softap_test] Error 1 make[4]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/demo' make[3]: *** [/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/.built] Error 2 make[3]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/softap' make[2]: *** [package/allwinner/softap/compile] Error 2 make[2]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' make[1]: *** [/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' make: *** [world] 错误 2 #### make failed to build some targets (17 seconds) #### rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ find . -name libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/linuxgnueabi/libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/lgnueabihf/libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/uclgnueabi/libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/lgnueabi/libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/install/external/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/install/lib/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/linuxgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/lgnueabihf/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/uclgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/lgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/ipkg-install/usr/lib/libssl.so ./out/astar-parrot/compile_dir/target/openssl-1.0.2h/libssl.so ./out/astar-parrot/compile_dir/target/openssl-1.0.2h/ipkg-install/usr/lib/libssl.so ./out/astar-parrot/staging_dir/target/usr/lib/libssl.so rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ 根据经验可以知道全志R16平台的tinav2.1系统的SDK里面自带的库：libssl有问题。（直接删除或者改名） ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi/libssl.so rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ cd package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi/ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ ll 总用量 5688 drwxrwxr-x 3 rootroot rootroot 4096 11月 2 2016 ./ drwxrwxr-x 7 rootroot rootroot 4096 11月 2 2016 ../ -rwxrwxr-x 1 rootroot rootroot 135064 11月 2 2016 libaw_aacdec.so* -rwxrwxr-x 1 rootroot rootroot 33844 11月 2 2016 libaw_alacdec.so* -rwxrwxr-x 1 rootroot rootroot 170664 11月 2 2016 libaw_amrdec.so* -rwxrwxr-x 1 rootroot rootroot 76748 11月 2 2016 libaw_apedec.so* -rwxrwxr-x 1 rootroot rootroot 116336 11月 2 2016 libaw_atrcdec.so* -rwxrwxr-x 1 rootroot rootroot 69756 11月 2 2016 libaw_cookdec.so* -rwxrwxr-x 1 rootroot rootroot 55152 11月 2 2016 libaw_flacdec.so* -rwxrwxr-x 1 rootroot rootroot 77500 11月 2 2016 libaw_mp3dec.so* -rwxrwxr-x 1 rootroot rootroot 130672 11月 2 2016 libaw_oggdec.so* -rwxrwxr-x 1 rootroot rootroot 8100 11月 2 2016 libaw_plugin.so* -rwxrwxr-x 1 rootroot rootroot 59284 11月 2 2016 libaw_radec.so* -rwxrwxr-x 1 rootroot rootroot 68296 11月 2 2016 libaw_siprdec.so* -rwxrwxr-x 1 rootroot rootroot 70072 11月 2 2016 libaw_wavdec.so* -rwxrwxr-x 1 rootroot rootroot 87996 11月 2 2016 libcdc_adecoder_debug.so* -rwxrwxr-x 1 rootroot rootroot 35652 11月 2 2016 libcdc_adecoder.so* -rwxrwxr-x 1 rootroot rootroot 166808 11月 2 2016 libcdc_aencoder.so* -rwxrwxr-x 1 rootroot rootroot 1500820 11月 2 2016 libcrypto.so* drwxrwxr-x 2 rootroot rootroot 4096 11月 2 2016 lib_debug/ -rwxrwxr-x 1 rootroot rootroot 1179664 11月 2 2016 liblive555.so* -rwxrwxr-x 1 rootroot rootroot 14464 11月 2 2016 libpostprocess.so* -rwxrwxr-x 1 rootroot rootroot 4672 11月 2 2016 librw_data_api.so* -rwxrwxr-x 1 rootroot rootroot 341764 11月 2 2016 libssl.so* -rwxrwxr-x 1 rootroot rootroot 1282208 11月 2 2016 libxml2.so* -rwxrwxr-x 1 rootroot rootroot 80792 11月 2 2016 libz.so* rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ mv libssl.so libssl.so_bak rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ cd - /home/wwt/softap_ap6212a0_tinav2.1 rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j1 rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ pack -d 6、刷机之后，在串口终端中通过softap_test打开softap出错（查明是全志给的patch的路径的问题！） [ 16.536954] dhd_prot_ioctl : bus is down. we have nothing to do [ 16.543761] bcmsdh_oob_intr_unregister: Enter [ 16.548794] bcmsdh_oob_intr_unregister: irq is not registered [ 16.555292] dhd_txglom_enable: enable 0 [ 16.559734] dhd_bus_devreset: WLAN OFF DONE [ 16.564616] wifi_platform_set_power = 0 [ 16.568970] ======== PULL WL_REG_ON LOW! ======== [ 16.574416] [wifi_pm]: wifi power off [ 16.578581] dhdsdio_probe : the lock is released. [ 16.584007] dhd_module_init: Exit err=0 [ 16.591551] xt_time: kernel timezone is -0000 [ 17.648758] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B [ 17.662302] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B [ 17.678544] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B [ 17.850121] android_usb: already disabled [ 17.890241] adb_open [ 17.892807] adb_bind_config [ 17.896040] ep_matches, wrn: endpoint already claimed, ep(0xc068721c, 0xd7a980c0, ep1in-bulk) [ 19.785448] android_usb gadget: high-speed config #1: android BusyBox v1.24.1 () built-in shell (ash) _____ _ __ _ |_ _||_| ___ _ _ | | |_| ___ _ _ _ _ | | _ | || | | |__ | || || | ||_'_| | | | || | || _ | |_____||_||_|_||___||_,_| |_| |_||_|_||_|_| Tina is Based on OpenWrt! ---------------------------------------------- Tina Linux (Neptune, 57513AA3) ---------------------------------------------- root@TinaLinux:/# root@TinaLinux:/# root@TinaLinux:/# so softap_down softap_test softap_up sort root@TinaLinux:/# so softap_down softap_test softap_up sort root@TinaLinux:/# cd /bin/ root@TinaLinux:/bin# ll so* -rwxr-xr-x 1 root root 4095 Sep 14 19:08 softap_down -rwxr-xr-x 1 root root 4095 Sep 14 19:08 softap_test -rwxr-xr-x 1 root root 8191 Sep 14 19:08 softap_up root@TinaLinux:/bin# root@TinaLinux:/bin# root@TinaLinux:/bin# softap_test *************************** Start hostapd test! *************************** Start to reload firmware! Enter: wifi_get_fw_path function, fw_type=1,Eneter: wifi_change_fw_path, fwpath = lib/firmware/fw_bcm43438a0_apsta.bin. Softap fwReload - OkMessage is: OK Reload firmware finished! Start to set softap! Message is: OK Set softap finished! [ 75.613141] dhd_open: Enter d720d000 [ 75.617247] [ 75.617249] Dongle Host Driver, version 1.201.59.3 (r506368) [ 75.617254] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2017 at 11:02:29 [ 75.633597] wl_android_wifi_on in 1 [ 75.637659] wl_android_wifi_on in 2: g_wifi_on=0 [ 75.642896] wifi_platform_set_power = 1 [ 75.647247] ======== PULL WL_REG_ON HIGH! ======== [ 75.652765] [wifi_pm]: wifi power on [ 75.960028] sdio_reset_comm(): [ 75.963526] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 75.976104] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 75.987627] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 75.998550] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 76.020809] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 76.028967] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 76.037137] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 76.047072] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 76.165734] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 76.176190] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 76.186815] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 76.197594] [ 76.197597] [ 76.197599] dhd_bus_devreset: == WLAN ON == [ 76.206013] F1 signature read @0x18000000=0x1540a9a6 [ 76.213284] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 76.221292] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 76.228727] dhdsdio_probe_init: set use_rxchain 1 from config.txt [ 76.235753] dhd_conf_read_config: Ignore config file /lib/firmware/config.txt [ 76.243796] dhd_conf_set_fw_name_by_chip: firmware_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 76.253368] Final fw_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 76.260041] Final nv_path=/lib/firmware/nvram.txt [ 76.265358] Final conf_path=/lib/firmware/config.txt [ 76.271554] dhdsdio_download_code_file: Open firmware file failed lib/firmware/fw_bcm43438a0_apsta.bin [ 76.282093] _dhdsdio_download_firmware: dongle image file download failed [ 76.289838] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 76.295753] dhd_prot_ioctl : bus is down. we have nothing to do [ 76.302529] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 76.308454] wifi_platform_set_power = 0 [ 76.312912] ======== PULL WL_REG_ON LOW! ======== [ 76.318233] [wifi_pm]: wifi power off [ 76.322408] wl_android_wifi_on: Failed [ 76.326758] dhd_open : wl_android_wifi_on failed (-35) [ 76.332573] dhd_stop: Enter d720d000 [ 76.336637] wl_android_wifi_off in 1 [ 76.340800] wl_android_wifi_off in 2: g_wifi_on=0 [ 76.346115] wl_android_wifi_off out [ 76.350093] dhd_stop: Exit [ 76.353290] dhd_open: Exit ret=-1 ifconfig: SIOCSIFFLAGS: Operation not permitted Start to start softap! Configuration file: /etc/wifi/ho[ 80.454347] dhd_open: Enter d720d000 stapd.conf [ 80.458611] [ 80.458613] Dongle Host Driver, version 1.201.59.3 (r506368) [ 80.458618] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2017 at 11:02:29 [ 80.476003] wl_android_wifi_on in 1 [ 80.479971] wl_android_wifi_on in 2: g_wifi_on=0 [ 80.485214] wifi_platform_set_power = 1 [ 80.489657] ======== PULL WL_REG_ON HIGH! ======== [ 80.495082] [wifi_pm]: wifi power on SoftAP started successfullyMessage is: OK Start softap finished! [ 80.800038] sdio_reset_comm(): [ 80.803641] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 80.816148] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 80.827683] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 80.838604] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 80.860859] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 80.869016] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 80.877280] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 80.887030] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 81.005831] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.016222] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.026711] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.037496] [ 81.037499] [ 81.037502] dhd_bus_devreset: == WLAN ON == [ 81.045875] F1 signature read @0x18000000=0x1540a9a6 [ 81.053157] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 81.061161] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 81.068590] dhdsdio_probe_init: set use_rxchain 1 from config.txt [ 81.075623] dhd_conf_read_config: Ignore config file /lib/firmware/config.txt [ 81.083760] dhd_conf_set_fw_name_by_chip: firmware_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 81.093240] Final fw_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 81.099901] Final nv_path=/lib/firmware/nvram.txt [ 81.105228] Final conf_path=/lib/firmware/config.txt [ 81.111473] dhdsdio_download_code_file: Open firmware file failed lib/firmware/fw_bcm43438a0_apsta.bin [ 81.122017] _dhdsdio_download_firmware: dongle image file download failed [ 81.129672] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 81.135676] dhd_prot_ioctl : bus is down. we have nothing to do [ 81.142356] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 81.148373] wifi_platform_set_power = 0 [ 81.152740] ======== PULL WL_REG_ON LOW! ======== [ 81.158059] [wifi_pm]: wifi power off [ 81.162321] wl_android_wifi_on: Failed [ 81.166579] dhd_open : wl_android_wifi_on failed (-35) [ 81.172394] dhd_stop: Enter d720d000 [ 81.176548] wl_android_wifi_off in 1 [ 81.180623] wl_android_wifi_off in 2: g_wifi_on=0 [ 81.185942] wl_android_wifi_off out [ 81.189908] dhd_stop: Exit [ 81.193026] dhd_open: Exit ret=-1 Could not set interface wlan0 fl[ 81.196943] dhd_inetaddr_notifier_call: bus not ready, exit ags (UP): Operation not permitte[ 81.206128] dhd_open: Enter d720d000 d nl80211: Could not set interf[ 81.212702] ace 'wlan0' UP nl80211: deinit [ 81.212706] Dongle Host Driver, version 1.201.59.3 (r506368) ifname=wlan0 disabled_11b_rates=[ 81.212710] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2017 at 11:02:29 0 [ 81.236958] wl_android_wifi_on in 1 [ 81.241176] wl_android_wifi_on in 2: g_wifi_on=0 [ 81.246400] wifi_platform_set_power = 1 [ 81.250760] ======== PULL WL_REG_ON HIGH! ======== [ 81.256266] [wifi_pm]: wifi power on [ 81.570028] sdio_reset_comm(): [ 81.573521] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.586092] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.597610] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 81.608512] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 81.630743] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 81.638905] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 81.647165] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 81.656911] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 81.775658] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.785943] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.796508] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.807280] [ 81.807283] [ 81.807285] dhd_bus_devreset: == WLAN ON == [ 81.815693] F1 signature read @0x18000000=0x1540a9a6 [ 81.822936] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 81.830931] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 81.838356] dhdsdio_probe_init: set use_rxchain 1 from config.txt [ 81.845386] dhd_conf_read_config: Ignore config file /lib/firmware/config.txt [ 81.853427] dhd_conf_set_fw_name_by_chip: firmware_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 81.862999] Final fw_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 81.869660] Final nv_path=/lib/firmware/nvram.txt [ 81.874988] Final conf_path=/lib/firmware/config.txt [ 81.881223] dhdsdio_download_code_file: Open firmware file failed lib/firmware/fw_bcm43438a0_apsta.bin [ 81.891670] _dhdsdio_download_firmware: dongle image file download failed [ 81.899411] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 81.905327] dhd_prot_ioctl : bus is down. we have nothing to do [ 81.912108] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 81.918034] wifi_platform_set_power = 0 [ 81.922493] ======== PULL WL_REG_ON LOW! ======== [ 81.927810] [wifi_pm]: wifi power off [ 81.932073] wl_android_wifi_on: Failed [ 81.936331] dhd_open : wl_android_wifi_on failed (-35) [ 81.942144] dhd_stop: Enter d720d000 [ 81.946298] wl_android_wifi_off in 1 [ 81.950371] wl_android_wifi_off in 2: g_wifi_on=0 [ 81.955686] wl_android_wifi_off out [ 81.959742] dhd_stop: Exit [ 81.962860] dhd_open: Exit ret=-1 ifconfig: SIOCSIFFLAGS: Operation not permitted nl80211 driver initialization failed. wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED hostapd_free_hapd_data: Interface wlan0 wasn't started *************************** Hostapd test successed! *************************** root@TinaLinux:/bin# 因为softap_test的绝对路径是：/bin/softap_test。那么lib/firmware/fw_bcm43438a0_apsta.bin的路径就应该是：/bin/lib/firmware/fw_bcm43438a0_apsta.bin。将目录/lib/firmware/fw_bcm43438a0_apsta.bin中的AP6212的库文件全部拷贝到：/bin/lib/firmware/fw_bcm43438a0_apsta.bin就可以通过softap_test正常打开softap了！ root@TinaLinux:/bin# root@TinaLinux:/bin# mkdir -p lib/firmware/ root@TinaLinux:/bin# cd lib/firmware/ root@TinaLinux:/bin/lib/firmware# ll drwxr-xr-x 2 root root 1024 Sep 16 03:16 . drwxr-xr-x 3 root root 1024 Sep 16 03:16 .. root@TinaLinux:/bin/lib/firmware# cd /lib/firmware/ root@TinaLinux:/lib/firmware# ll drwxr-xr-x 2 root root 139 Sep 14 19:08 . drwxr-xr-x 10 root root 681 Sep 14 19:02 .. -rw-r--r-- 1 root root 26020 Sep 14 17:31 bcm43438a0.hcd -rw-r--r-- 1 root root 378595 Sep 14 17:31 fw_bcm43438a0.bin -rw-r--r-- 1 root root 309352 Sep 14 17:31 fw_bcm43438a0_apsta.bin -rw-r--r-- 1 root root 336323 Sep 14 17:31 fw_bcm43438a0_p2p.bin -rw-r--r-- 1 root root 902 Sep 14 17:31 nvram.txt root@TinaLinux:/lib/firmware# cp * /bin/lib/firmware/ root@TinaLinux:/lib/firmware# cd /bin/lib/firmware/ root@TinaLinux:/bin/lib/firmware# ll drwxr-xr-x 2 root root 1024 Sep 16 03:17 . drwxr-xr-x 3 root root 1024 Sep 16 03:16 .. -rw-r--r-- 1 root root 26020 Sep 16 03:17 bcm43438a0.hcd -rw-r--r-- 1 root root 378595 Sep 16 03:17 fw_bcm43438a0.bin -rw-r--r-- 1 root root 309352 Sep 16 03:17 fw_bcm43438a0_apsta.bin -rw-r--r-- 1 root root 336323 Sep 16 03:17 fw_bcm43438a0_p2p.bin -rw-r--r-- 1 root root 902 Sep 16 03:17 nvram.txt root@TinaLinux:/bin/lib/firmware# cd /bin/ root@TinaLinux:/bin# root@TinaLinux:/bin# root@TinaLinux:/bin# softap_test *************************** Start hostapd test! *************************** Start to reload firmware! Enter: wifi_get_fw_path function, fw_type=1,Eneter: wifi_change_fw_path, fwpath = lib/firmware/fw_bcm43438a0_apsta.bin. Softap fwReload - OkMessage is: OK Reload firmware finished! Start to set softap! Message is: OK Set softap finished! [ 190.043911] dhd_open: Enter d720d000 [ 190.048003] [ 190.048006] Dongle Host Driver, version 1.201.59.3 (r506368) [ 190.048010] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2017 at 11:02:29 [ 190.064444] wl_android_wifi_on in 1 [ 190.068411] wl_android_wifi_on in 2: g_wifi_on=0 [ 190.073643] wifi_platform_set_power = 1 [ 190.078087] ======== PULL WL_REG_ON HIGH! ======== [ 190.083512] [wifi_pm]: wifi power on [ 190.390029] sdio_reset_comm(): [ 190.393528] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.406118] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.417559] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 190.428484] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 190.450739] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 190.458990] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 190.467164] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 190.477004] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 190.595621] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.606060] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.616684] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.627433] [ 190.627436] [ 190.627439] dhd_bus_devreset: == WLAN ON == [ 190.635854] F1 signature read @0x18000000=0x1540a9a6 [ 190.643122] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 190.651026] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 190.658542] dhdsdio_probe_init: set use_rxchain 1 from config.txt [ 190.665481] dhd_conf_read_config: Ignore config file /lib/firmware/config.txt [ 190.673620] dhd_conf_set_fw_name_by_chip: firmware_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 190.683192] Final fw_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 190.689763] Final nv_path=/lib/firmware/nvram.txt [ 190.695090] Final conf_path=/lib/firmware/config.txt [ 190.733434] NVRAM version: AP6212_NVRAM_V1.0_20140603 [ 190.742372] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 190.804325] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 190.811066] bcmsdh_oob_intr_register: Enter [ 190.815806] bcmsdh_oob_intr_register: HW_OOB enabled [ 190.821429] bcmsdh_oob_intr_register OOB irq=7 flags=414 [ 190.827623] bcmsdh_oob_intr_register: enable_irq_wake [ 190.833345] bcmsdh_oob_intr_register: enable_irq_wake failed with -6 [ 190.841211] dhd_conf_set_band: Set band 0 [ 190.848224] Firmware up: op_mode=0x0002, MAC=02:1a:11:f9:3d:89 [ 190.854908] dhd_conf_set_country: Set country CN, revision 0 [ 190.924854] Country code: CN (CN/0) [ 190.929416] dhd_conf_set_roam: Set roam_off 1 [ 190.940302] dhd_arp_offload_enable: failed to enabe ARP offload to 0, retcode = -23 [ 190.949649] dhd_arp_offload_set: failed to set ARP offload mode to 0x0, retcode = -23 [ 190.959035] Firmware version = wl0: Jun 6 2014 14:57:15 version 7.10.226.49 (r) FWID 01-cf4a5122 [ 190.969088] Driver: 1.201.59.3 (r506368) [ 190.969093] Firmware: wl0: Jun 6 2014 14:57:15 version 7.10.226.49 (r) FWID 01-cf4a5122 [ 190.983566] dhd_txglom_enable: enable 1 [ 190.987919] dhd_conf_set_disable_proptx: set disable_proptx 0 [ 190.996601] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79 [ 191.004833] dhd_wlfc_init(): wlfc_mode=0x0, ret=-23 [ 191.011090] wl_android_wifi_on: Success [ 191.085709] dhd_open: Exit ret=0 Start to start softap! Configuration file: /etc/wifi/hostapd.conf nl80211: Could not re-add multic[ 195.098274] netdev_ifidx(5), chan_type(1) target channel(6) ast membership for vendor events: -2 (No such file or directory) [ 195.159332] Disconnect STA : ff:ff:ff:ff:ff:ff scb_val.val 3 Using interface wlan0 with hwaddr 02:1a:11:f9:3d:89 and ssid "Smart-AW-HOSTAPD" VLAN: vlan_set_name_type: SET_VLAN_NAME_TYPE_CMD name_type=2 failed: No error information SoftAP started successfullyMessage is: OK Start softap finished! wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED *************************** Hostapd test successed! *************************** root@TinaLinux:/bin# root@TinaLinux:/bin# 7、查找/修改路径lib/firmware/fw_bcm43438a0_apsta.bin的位置，解决问题！ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ grep "lib/firmware/fw_bcm43438a0_apsta.bin" . -R grep: ./target/.git/svn: 没有那个文件或目录 grep: ./dl/.git/svn: 没有那个文件或目录 grep: ./scripts/.git/svn: 没有那个文件或目录 grep: ./toolchain/.git/svn: 没有那个文件或目录 grep: ./lichee/brandy/.git/svn: 没有那个文件或目录 grep: ./lichee/linux-3.4/.git/svn: 没有那个文件或目录 grep: ./.repo/manifests/.git/svn: 没有那个文件或目录 grep: ./tools/.git/packed-refs: 没有那个文件或目录 grep: ./tools/.git/svn: 没有那个文件或目录 ./package/allwinner/softap/src/include/wifi.h:#define WIFI_DRIVER_FW_PATH_AP "lib/firmware/fw_bcm43438a0_apsta.bin" grep: ./package/.git/svn: 没有那个文件或目录 grep: ./config/.git/svn: 没有那个文件或目录 grep: ./prebuilt/.git/svn: 没有那个文件或目录 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/arm-openwrt-linux-muslgnueabi/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib64/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/arm-openwrt-linux/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib32/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib32/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib32/lib: 符号连接的层数过多 grep: ./docs/.git/svn: 没有那个文件或目录 grep: ./build/.git/svn: 没有那个文件或目录 grep: 警告: ./out/astar-parrot/compile_dir/target/alsa-lib-1.1.0/include/alsa: 嵌套目录循环 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/ccX0DZGY.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/arjGlms3: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/.xrdp/xrdp-Wpph9R: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/.xrdp/xrdp-sesman-j8EDdT: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/ccZVA9SY.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/ccX0uKZX.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/jack-sam: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/cc61XiF1.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/config-err-1dsmuu: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/.X11-unix/X0: 没有那个设备或地址 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/ccsCfxm0.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/.ICE-unix/1629: 没有那个设备或地址 grep: ./out/astar-parrot/compile_dir/target/rootfs/etc/fstab: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/rootfs/etc/resolv.conf: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/rootfs/etc/localtime: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/rootfs/etc/TZ: 没有那个文件或目录匹配到二进制文件 ./out/astar-parrot/compile_dir/target/rootfs/lib/libsoftap.so ./out/astar-parrot/compile_dir/target/rootfs/usr/lib/opkg/info/ap6212-firmware.list:/lib/firmware/fw_bcm43438a0_apsta.bin grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/iptables-1.4.21/ipkg-install/usr/bin/iptables-xml: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39/.git/svn: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/ccYUdHeN.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/ccwnGT98.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/arjGlms3: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/.xrdp/xrdp-Wpph9R: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/.xrdp/xrdp-sesman-j8EDdT: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/jack-sam: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/config-err-1dsmuu: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/ccKPHt0a.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/.X11-unix/X0: 没有那个设备或地址 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/ccTjmDl9.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/cchl8Q5Z.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/.ICE-unix/1629: 没有那个设备或地址 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/cc8cLhMk.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/cchrl5HM.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/etc/fstab: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/etc/resolv.conf: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/etc/localtime: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/etc/TZ: 没有那个文件或目录匹配到二进制文件 ./out/astar-parrot/compile_dir/target/softap-0.0.1/src/libsoftap.so ./out/astar-parrot/compile_dir/target/softap-0.0.1/src/include/wifi.h:#define WIFI_DRIVER_FW_PATH_AP "lib/firmware/fw_bcm43438a0_apsta.bin" 匹配到二进制文件 ./out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-sunxi/softap/lib/libsoftap.so 匹配到二进制文件 ./out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-install/usr/lib/libsoftap.so grep: ./out/astar-parrot/compile_dir/host/u-boot-2014.10/arch/sandbox/include/asm/arch: 没有那个文件或目录 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/.xrdp/xrdp-Wpph9R: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/.xrdp/xrdp-sesman-j8EDdT: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/jack-sam: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccOJeBXg.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccx3i6ni.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/config-err-1dsmuu: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccyysPO4.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccvMBZVn.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/.X11-unix/X0: 没有那个设备或地址 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/cc2RTnRj.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/arXGbM2T: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/.ICE-unix/1629: 没有那个设备或地址 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccngUTgH.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccbLfznO.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/etc/fstab: 没有那个文件或目录 grep: ./out/astar-parrot/staging_dir/target/rootfs/etc/resolv.conf: 没有那个文件或目录 grep: ./out/astar-parrot/staging_dir/target/rootfs/etc/localtime: 没有那个文件或目录 grep: ./out/astar-parrot/staging_dir/target/rootfs/etc/TZ: 没有那个文件或目录匹配到二进制文件 ./out/astar-parrot/staging_dir/target/rootfs/lib/libsoftap.so 匹配到二进制文件 ./out/astar-parrot/staging_dir/target/lib/libsoftap.so rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ W:\softap_ap6212a0_tinav2.1\package\allwinner\softap\src\include\wifi.h #ifndef WIFI_DRIVER_FW_PATH_AP #define WIFI_DRIVER_FW_PATH_AP "lib/firmware/fw_bcm43438a0_apsta.bin" #endif #ifndef WIFI_DRIVER_FW_PATH_P2P #define WIFI_DRIVER_FW_PATH_P2P "lib/firmware/fw_bcm43438a0_p2p.bin" #endif 修改为： #ifndef WIFI_DRIVER_FW_PATH_AP //#define WIFI_DRIVER_FW_PATH_AP "lib/firmware/fw_bcm43438a0_apsta.bin" #define WIFI_DRIVER_FW_PATH_AP "/lib/firmware/fw_bcm43438a0_apsta.bin" #endif #ifndef WIFI_DRIVER_FW_PATH_P2P //#define WIFI_DRIVER_FW_PATH_P2P "lib/firmware/fw_bcm43438a0_p2p.bin" #define WIFI_DRIVER_FW_PATH_P2P "/lib/firmware/fw_bcm43438a0_p2p.bin" #endif rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j12 ONTROL/postinst-pkg; echo "insert_modules $modules" >> /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-net-ap6212/CONTROL/postinst-pkg; chmod 0755 /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-net-ap6212/CONTROL/postinst-pkg; fi SHELL= flock /home/wwt/softap_ap6212a0_tinav2.1/tmp/.root-copy.flock -c 'cp -fpR /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-net-ap6212/. /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-net-ap6212 touch /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.kmod-net-ap6212_installed if [ -f /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install.clean ]; then rm -f /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install.clean; fi; echo "kmod-net-ap6212" >> /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install make[3]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1/package/kernel/linux' make[2]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' make[1]: *** [/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' Build failed - please re-run with -j1 to see the real error message make: *** [world] 错误 1 #### make failed to build some targets (8 seconds) #### rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j1 #softap_test make -C /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/demo/ ARCH="arm" AR="arm-openwrt-linux-muslgnueabi-ar" CC="arm-openwrt-linux-muslgnueabi-gcc" CXX="arm-openwrt-linux-muslgnueabi-g++" CFLAGS="-Os -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -fno-caller-saves -fno-plt -mfloat-abi=hard -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro" LDFLAGS="-L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib -L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/lib -L/home/wwt/softap_ap6212a0_tinav2.1/prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/usr/lib -L/home/wwt/softap_ap6212a0_tinav2.1/prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib -znow -zrelro" CONFIG_PREFIX="/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-install" all make[4]: Entering directory `/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/demo' arm-openwrt-linux-muslgnueabi-gcc -o softap_test softap_test.c -Os -pipe -march=armv

数据库及相关技术

1,178

社区成员

18,938

社区内容

发帖

与我相关

我的任务

社区管理员

加入社区

近7日
近30日
至今

加载中

查看更多榜单

社区公告

暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章