社区
交换及路由技术
帖子详情
我的提示“Setup is starting windows 2000”时就不动了,请问为什么?
musclecn
2003-03-13 12:18:41
我在我的scsi硬盘上安装win2000,可以每到这个提示“Setup is starting windows 2000”时就不动了,象死机,请问为什么?是不是scsi卡驱动没有安装,可以我安F6进取安装了驱动了。
...全文
1216
4
打赏
收藏
我的提示“Setup is starting windows 2000”时就不动了,请问为什么?
我在我的scsi硬盘上安装win2000,可以每到这个提示“Setup is starting windows 2000”时就不动了,象死机,请问为什么?是不是scsi卡驱动没有安装,可以我安F6进取安装了驱动了。
复制链接
扫一扫
分享
转发到动态
举报
写回复
配置赞助广告
用AI写文章
4 条
回复
切换为时间正序
请发表友善的回复…
发表回复
打赏红包
musclecn
2003-03-13
打赏
举报
回复
是不是scsi卡的驱动有问题?也会照成这个结果!
dongdongbao333
2003-03-13
打赏
举报
回复
CMOS里的防病毒设置项打开了,把它设置为Disabled,检查你的硬盘是否有问题。
musclecn
2003-03-13
打赏
举报
回复
今天把所有的scsi设备都卖了,害的我烧了个40G硬盘,给分,郁闷!
wangne
2003-03-13
打赏
举报
回复
象这样的问题,你试一试换个光驱试一试,也许有用,以前我也有这样的问题出现,换了就没有事了,不过可能你那样的情况,也许还有别的硬件会有问题,你不防把它们全部拆除,重装,再一个一个的确良装回去
vmtools-linux.iso
过程: 1.在虚拟机上安装了vmware,安装完成后,默认vm tools是没有安装的,启动后在下方
提示
没有安装虚拟工具,安装过程省略; 2.安装redhat,这个安装过程就省略,没安过的可以也去G一下; 3.安装vm tools: 1)以ROOT身份进入LINUX 2)按下 CTRL ALT组合键,进入主操作系统,点击VMWARE状态栏安装
提示
,或者点击 虚拟菜单下的安装虚拟机工具子菜单. 3)确认安装VMWARE TOOLS. 这
时
我们并没有真正的安装上了VMWARE TOOLS软件包,如果您点击菜单:DEVICES,您就会发现光驱的菜单文字变为:ide1:0-> C:\Program Files\VMware\VMware Workstation\Programs\linux.iso,这表示VMWARE将LINUX的ISO映象文件作为了虚拟机的光盘 4)鼠标点击LINUX界面,进入LINUX. 5)运行如下命令,注意大小写. mount -t iso9660 /dev/cdrom /mnt 加载CDROM设备,这
时
如果进入 /mnt 目录下,你将会 发现多了一个文件:vmware-linux-tools.
tar
.gz.这就是WMWARE TOOLS的LINUX软件包,也就是我们刚才使用WINISO 打开LINUX.ISO文件所看到的. cp /mnt/vmware-linux-tools.
tar
.gz /tmp 将该软件包拷贝到LINUX的 TMP目录下. umount /dev/cdrom 卸载CDROM. cd /tmp 进入TMP目录
tar
zxf vmware-linux-tools.
tar
.gz 解压缩该软件包,默认解压到vmware-tools-distrib 目录下(与文件名同名). cd vmware-linux-tools 进入解压后的目录 这
时
要进入文本模式下运行下面的命令 ./install.pl 这
时
install
提示
你是否需要备份以前的配置文件,建议选择"y". 等待INSTALL运行完成后,这
时
键入 S
TAR
TX 命令,启动LINUX图形界面,vm中不再
提示
没有安装虚拟机工具了 在Ubuntu下安装VMware-Tools不像在
Windows
下安装容易,昨晚整了挺长
时
间终于安上了.方法在下面. 感谢提供方法的大侠! VMware Tools位置:VMware的安装路径\VMware\VMware Workstation\linux.iso 启动后按Esc选择recovery mode登陆.然后点击"虚拟机"→"安装VMware Tools". [root@rd01 ~]# mount /cdrom # 有
时
可能加载不了,这
时
就要先将系统关闭,再手动指定 ISO 映像: [root@rd01 ~]# cd /cdrom [root@rd01 ~]# ls -a [root@rd01 ~]# cp VMwareTools-5.5.1-19175.
tar
.gz /tmp [root@rd01 ~]# cd /tmp [root@rd01 ~]#
tar
zxpf VMwareTools-5.5.1-19175.
tar
.gz [root@rd01 ~]# cd vmware-tools-distrib [root@rd01 vmware-tools-distrib]# ./vmware-install.pl Crea
ting
a new installer database using the
tar
3 format. Installing the content of the package. # 安装过程的画面,全部使用默认值,一直按 Enter 就对了 In which directory do you want to install the binary files? [/usr/bin] What is the directory that contains the init directories (rc0.d/ to rc6.d/)? [/etc/rc.d] What is the directory that contains the init scripts? [/etc/rc.d/init.d] In which directory do you want to install the daemon files? [/usr/sbin] In which directory do you want to install the library files? [/usr/lib/vmware-tools] Thepath "/usr/lib/vmware-tools" does not exist currently. This programisgoingto create it, including needed parent directories. Is thiswhatyou want? [yes] In which directory do you want to install the documentation files? [/usr/share/doc/vmware-tools] Thepath "/usr/share/doc/vmware-tools" does not exist currently.Thisprogram isgoing to create it, including needed parent directories.Isthis what you want? [yes] The installation of VMware Tools 5.5.1 build-19175 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl". Before running VMware Tools for the first time, you need to configure it by invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want this program to invoke the command for you now? [yes] Stopping VMware Tools services in the virtual machine: Guest opera
ting
system daemon: [ 确定 ] Trying to find a suitable vmhgfs module for your running kernel. The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel. pcnet32 30153 0 Unloading pcnet32 module Trying to find a suitable vmxnet module for your running kernel. The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel. Detected X.org version 6.8. 关闭控制台鼠标服务: [ 确定 ] 启动控制台鼠标服务: [ 确定 ] Please choose one of the following display sizes (1 - 13): # 显示分辨率,这里是以 1024x768 为例 # VMware Tools 安装的
时
候,会自动修改 X server 的配置文件 [1] "640x480" [2]< "800x600" [3] "1024x768" [4] "1152x864" [5] "1280x800" [6] "1152x900" [7] "1280x1024" [8] "1376x1032" [9] "1400x1050" [10] "1680x1050" [11] "1600x1200" [12] "1920x1200" [13] "2364x1773" Please enter a number between 1 and 13: [2] 3 X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Opera
ting
System: Linux 2.6.9-34.EL i686 [ELF] Current Opera
ting
System: Linux rd01.domain 2.6.9-34.EL #1 Wed Mar 8 00:07:35 CST 2006 i686 Build Date: 04 May 2006 Build Host: x8664-build.centos.org Before repor
ting
problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present OSKernel: Linux version 2.6.9-34.EL (buildcentos@build-i386) (gccversion3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Wed Mar 8 00:07:35 CST 2006P Markers: (--) probed, (**) from config file, (==) default set
ting
, ( ) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. ( ) Log file: "/tmp/vmware-config0/XF86ConfigLog.3131", Time: Mon Jun 12 20:57:34 2006 ( ) Using config file: "/tmp/vmware-config0/XF86Config.3131" (WW) VMWARE(0): Failed to set up write-combining range (0xf0000000,0x1000000) X is running fine with the new config file. S
tar
ting
VMware Tools services in the virtual machine: Switching to guest configuration: [ 确定 ] Guest filesystem driver: [ 确定 ] DMA
setup
: [ 确定 ] Guest opera
ting
system daemon: [ 确定 ] The configuration of VMware Tools 5.5.1 build-19175 for Linux for this running kernel completed successfully. You must res
tar
t your X session before any mouse or graphics changes take effect. You can now run VMware Tools by invoking the following command: "/usr/bin/vmware-toolbox" during an XFree86 session. To use the vmxnet driver, res
tar
t networking using the following commands: /etc/init.d/network stop rmmod pcnet32 rmmod vmxnet depmod -a modprobe vmxnet /etc/init.d/network s
tar
t Enjoy, --the VMware team [root@rd01 vmware-tools-distrib]# shutdown -r now # 修改完成之后,重新启动计算机,让 VMware Tools 生效. == 重启后,你可能会发现还是要按"Ctrl Alt"释放鼠标(VM6.0没这问题了),我用的是5.5.3,要手动执行才有效果. 通过终端运行VMware-Tools: 点击Ubuntu桌面左上角的Applications→附件→终端,会打开一个类似
Windows
中记事本的程序,在里面输入以下内容($是自带的,不用专门输入): $ /usr/bin/vmware-toolbox 但如果你嫌麻烦,我们就需要让vmware-toolbox实现开机自动运行.点击 Ubuntu菜单:System→首选项→会话→S
tar
tup Programs,Add一个Name叫"vmware-toolbox",Command是"/usr/bin/vmware-toolbox"的启动 程序.这样每次开机后就能自动运行VMware Tools了.重启Ubuntu看看效果吧!(注意:vmware-toolbox并不是在后台隐藏运行的,启动后不要关闭). VMware Tools固然是个好东西,但也有副作用,比如说:虚拟机中的鼠标的滚轮不好使了.我们这样解决这个问题,还是打开终端,输入: $ sudo gedit /etc/X11/xorg.conf 这个命令使系统以root权限打开鼠标配置文件/etc/X11/xorg.conf.把文件中的 Option "Protocol" "ps/2" 改成 Option "Protocol" "IMPS/2" 重启Ubuntu搞定
[python 3]
Windows
7
setup
failed 安装失败解决方法
Windows
7下python 3安装报错解决方案
VMware安装
Windows
Server 2003
提示
Opera
ting
System not found
VMware安装
Windows
Server 2003报Opera
ting
System not found错误 解决方法 换了一个ISO文件就解决了。 下载地址 ed2k://|file|cn_win_srv_2003_r2_enterprise_x64_with_sp2_vl_cd1_X13-47314.iso|647686144|107F10D2A7FF12FFF0602FF60602BB37|/ 事情经过 刚开始在MSDN,我告诉你下载了一个
Windows
Server 2003,大小100多兆
解决win7下安装Mysql卡在S
tar
t service的问题
解决win7下安装Mysql卡在S
tar
t service的问题 由于之前在电脑上安装过MySQL,所以旧的服务器依然存在电脑上,再重新安装
时
s
tar
tservice会报错。 mysql下载地址http://www.mysql.com/downloads/mysql/ 1、打开cmd,键入sc delete mysql,然后会
提示
[SC] DeleteService SUCCE
安装win7
时
出现错误
提示
的解决方法
安装系统
时
,最苦恼的就是安装到一半
时
出现错误
提示
,我也曾遇到过这样的问题,上次用U盘安装win7
时
,出现U盘安装出错
提示
,试了好几个方法才解决。因为安装出错的原因有很多种,出现的
提示
也会不一样,因此,我们需要根据
提示
来选择适合的解决方法。错误
提示
一 1:Please wait...请稍候... 2:
Setup
is copying temporary files......
交换及路由技术
3,812
社区成员
12,781
社区内容
发帖
与我相关
我的任务
交换及路由技术
硬件使用 交换及路由技术相关问题讨论专区
复制链接
扫一扫
分享
社区描述
硬件使用 交换及路由技术相关问题讨论专区
社区管理员
加入社区
获取链接或二维码
近7日
近30日
至今
加载中
查看更多榜单
社区公告
暂无公告
试试用AI创作助手写篇文章吧
+ 用AI写文章