用skyeye仿真出现的问题

QQ425887742 2008-04-04 12:25:18

(SkyEye) file vmlinux
Reading symbols from vmlinux...(no debugging symbols found)...done.
(SkyEye) target sim
cpu info: armv4, arm720t, 41807200, ffffff00, 1
mach info: name ep7312, mach_init addr 0x815e920
log_info: log is off.
log_info:log file is /tmp/test.log, fd is 0x979aeb0
log_info: log start clock 5000000
log_info: log end clock 6000000
SKYEYE: use arm7100 mmu ops
Loaded ROM ./initrd
Connected to the simulator.
(SkyEye) run
Starting program: /root/arm_skyeye/vmlinux
warning: No program loaded.
SKYEYE ARMul_STC,CANT, undefinstr, CPnum is 0, instr 3c4f6015, addr c0200474
以上是我在skyeye下运行情况，该错误怎样解决？
－－－－恳请帮助！！
下是skyeye.conf文件
#skyeye config file sample
cpu: arm720t
mach: ep7312
mem_bank: map=I, type=RW, addr=0x80000000, size=0x00010000
mem_bank: map=M, type=RW, addr=0xc0000000, size=0x00200000
mem_bank: map=M, type=RW, addr=0xc0200000, size=0x00200000, file=./initrd
mem_bank: map=M, type=RW, addr=0x04000000, size=0x01000000
log: logon=0,logfile=/tmp/test.log,start=5000000,end=6000000
－－生成的镜像为initrd,内核为vmlinux.

...全文