1.5w+
社区成员
VC中一个关于MessageBox()的问题...
如下代码:
int i = MessageBox("....","...",MB_OKCANCEL);
if( i==1)//当按下确认键后MessageBox()的返回值为 1 ,按取消键为 2.
{
CDialog::OnCancel;
}
请问各位高手,还有没有其它更好的方法可以取到MessageBox()的返回值呀
int i = MessageBox("....","...",MB_OKCANCEL);
if( i==1)//当按下确认键后MessageBox()的返回值为 1 ,按取消键为 2.
{
CDialog::OnCancel;
}
请问各位高手,还有没有其它更好的方法可以取到MessageBox()的返回值呀
...全文
当前发帖距今超过3年，不再开放新的回复
发表回复
casinosun 2008-04-17
除非你自己写一个messagebox的程序，网上也有很多
xjchilli 2008-04-17
这样直接不就OK啦，不要钻牛角了。。。
if( MessageBox( "hello" ) == IDOK )
{
///做该做的事
}
if( MessageBox( "hello" ) == IDOK )
{
///做该做的事
}
misssir 2008-04-17
组态程序
Ethan_yushui213 2008-04-17
怎么样可以不用编程就自己出来可执行程序呀~~~~~~~~~~~~~~~~
跟上面这个问题差不多
跟上面这个问题差不多
scq2099yt 2008-04-16
这样取就可以了
china_bai 2008-04-16
[Quote=引用 2 楼 wflishh 的回复:]
这样多累呀。不般都是用MessageBox("....","...",MB_OKCANCEL)＝＝IDOK;
If a message box has a Cancel button, the function returns the IDCANCEL value if either the ESC key is pressed or the Cancel button is selected. If the message box has no Cancel button, pressing ESC has no effect.
If the function fails, the return value is zero. To get extended error information, call GetLastError.
…
[/Quote]
利用IDOK等常量定义代替返回值。
再应该没其他的办法了。
这样多累呀。不般都是用MessageBox("....","...",MB_OKCANCEL)＝＝IDOK;
If a message box has a Cancel button, the function returns the IDCANCEL value if either the ESC key is pressed or the Cancel button is selected. If the message box has no Cancel button, pressing ESC has no effect.
If the function fails, the return value is zero. To get extended error information, call GetLastError.
…
[/Quote]
利用IDOK等常量定义代替返回值。
再应该没其他的办法了。
yanglovexian 2008-04-16
Zero indicates that there is not enough memory to create the message box.
Upon success, one of the values described in the following table is returned.
Value Description
IDABORT Abort button was selected.
IDCANCEL Cancel button or the close button on the title bar was selected.
IDIGNORE Ignore button was selected.
IDNO No button was selected.
IDOK OK button was selected.
IDRETRY Retry button was selected.
IDYES Yes button was selected.
Upon success, one of the values described in the following table is returned.
Value Description
IDABORT Abort button was selected.
IDCANCEL Cancel button or the close button on the title bar was selected.
IDIGNORE Ignore button was selected.
IDNO No button was selected.
IDOK OK button was selected.
IDRETRY Retry button was selected.
IDYES Yes button was selected.
m_nNightmire 2008-04-16
if( MessageBox("....","...",MB_OKCANCEL) == IDOK )
{
blablalba....
}
if( MessageBox("....","...",MB_OKCANCEL) == IDCANCEL )
{
blablalba....
}
{
blablalba....
}
if( MessageBox("....","...",MB_OKCANCEL) == IDCANCEL )
{
blablalba....
}
shakaqrj 2008-04-16
IDABORT Abort button was selected.
IDCANCEL Cancel button was selected.
IDCONTINUE Continue button was selected.
IDIGNORE Ignore button was selected.
IDNO No button was selected.
IDOK OK button was selected.
IDRETRY Retry button was selected.
IDTRYAGAIN Try Again button was selected.
IDYES Yes button was selected.
IDCANCEL Cancel button was selected.
IDCONTINUE Continue button was selected.
IDIGNORE Ignore button was selected.
IDNO No button was selected.
IDOK OK button was selected.
IDRETRY Retry button was selected.
IDTRYAGAIN Try Again button was selected.
IDYES Yes button was selected.
wflishh 2008-04-16
这样多累呀。不般都是用MessageBox("....","...",MB_OKCANCEL)＝＝IDOK;
If a message box has a Cancel button, the function returns the IDCANCEL value if either the ESC key is pressed or the Cancel button is selected. If the message box has no Cancel button, pressing ESC has no effect.
If the function fails, the return value is zero. To get extended error information, call GetLastError.
If the function succeeds, the return value is one of the following menu-item values.
IDABORT Abort button was selected.
IDCANCEL Cancel button was selected.
IDCONTINUE Continue button was selected.
IDIGNORE Ignore button was selected.
IDNO No button was selected.
IDOK OK button was selected.
IDRETRY Retry button was selected.
IDTRYAGAIN Try Again button was selected.
IDYES Yes button was selected.
If a message box has a Cancel button, the function returns the IDCANCEL value if either the ESC key is pressed or the Cancel button is selected. If the message box has no Cancel button, pressing ESC has no effect.
If the function fails, the return value is zero. To get extended error information, call GetLastError.
If the function succeeds, the return value is one of the following menu-item values.
IDABORT Abort button was selected.
IDCANCEL Cancel button was selected.
IDCONTINUE Continue button was selected.
IDIGNORE Ignore button was selected.
IDNO No button was selected.
IDOK OK button was selected.
IDRETRY Retry button was selected.
IDTRYAGAIN Try Again button was selected.
IDYES Yes button was selected.
erdgzw 2008-04-16
你想怎样取得返回值呢？
本人部分博客导航(ing...) 基础学习笔记之opencv(23)：OpenCV坐标体系的初步认识 基础学习笔记之opencv(22)：learning OpenCV书中一个连通域处理函数 基础学习笔记之opencv(21)：一个简单有趣的皮肤检测代码 基础学习笔记之opencv(20)：...
tornadomeet部分博客导航(ing...) 3(Activity生命周期) Android开发历程_2(实现简单的乘法计算) Android开发历程_1(从1个activity跳转到另一个activity) Matlab成长之路: Matlab成长之路_5(解决out of memory问题) Matlab成长之路_4(关于matlab的...
VC6.0转成VC2008可能出现的问题 9月23日BcgControlbar是个好东西——界面用
解压缩 BCGControlBar.zip （比如，到 c:/bcg 目录中）
把 c:/bcg/bin 增加到你的 path 环境变量中，
运行 Visual C++ 并且打开 Tools | Options 对话框...
VC：CListCtrl（库函数的加载和释放、获取系统颜色、向图片链表添加位图、客户区的获取和填充）... MessageBox(TEXT(chImagePath)); m_list.SetBkImage(TEXT(chImagePath),TRUE); // Use your own Image Address Here } /*在函数InitInstance()中初始化 COM libraries ; 如下： ...
VC开发指南--Visual C++/MFC入门教程
VC开发指南
1.1 如何学好VC
这个问题很多朋友都问过我，当然流汗是必须的，但同时如果按照某种思路进行有计划的学习就会起到更好的效果。万事开头难，为了帮助朋友们更快的掌握VC开发，下面我将...
vc++经典技巧总结 . 然后在要添加该对话框为属性页的类(头文件)里创建CpropertySheet类的一个对象m_tabsheet和新创建的对话框类的对象m_skatch；最后，在.cpp文件里的OnInitDialog()之类的函数里实现如下代码： m_tabsheet.Create(this...
VC常用代码 VC 学习 2009-03-07 15:28 1141人阅读 评论(0) 收藏 举报 =========================================================== //注意事项 //先执行OnInitDialog()函数，然后执行构造函数! //98下没有新...
关于使用GDI截取EDIT对话框生成bmp图片的相关问题 在写软件的时候遇到一个问题，要求是能够在EDIT对话框中设置字体字号，输入文字，同时点击button的时候可以截取EDIT对话框生成BMP图片。首先，关于GDI：GDI是图形设备接口的英文缩写，主要任务是负责系统与绘图程序...
关于设备坐标和逻辑坐标在vc中的相关 一 坐标系统概述 众所周知，VC中的坐标系统分为逻辑坐标和设备坐标，逻辑坐标就是内存中虚拟的坐标，我们可以理解为看不见的，而设备坐标就是跟具体的设备相联系的坐标系统，如：显示器和打印机等。不同的映射模式...
【VC6.0】直线的橡皮筋绘图技术 ），异或之后再取反（变成白色）最后得到一个颜色值显示在屏幕上（屏幕是白色、新线条也是白色、即原来的红线条被擦掉）。 ClientDC.MoveTo(m_ptOrigin.x,m_ptOrigin.y); ClientDC.LineTo(m_ptTarget.x,m_...
在VC6中基于dll开发插件用于各种图片显示(BMP/TGA/JPG/GIF/PNG/TIF/ICO/WMF/EMF/...) 比较详细地介绍VC6中一种插件的实现机制，并通过源代码给出了实现过程。同时，给出了VC6中使用IPicture接口和GDI+实现各种图片显示的过程和代码。
vc 入门
Visual C++/MFC入门教程
VC开发指南
1.1 如何学好VC
这个问题很多朋友都问过我，当然流汗是必须的，但同时如果按照某种思路进行有计划的学习就会起到更好的效果。万事开头难，为了帮助朋友们...
VC编程功能总结 ======================================================================== 从微软的站点看到一个简单的方法实现，不必计算RECT，不必处理鼠标消息的细节和窗口绘制，就能轻松实现没有标题栏的窗口移动的问题，...
