如何在RH9下配置USB ADSL MODEM上网？

ravenkatte 2003-07-10 09:23:37

如何配置呢？kppp？

我试过adsl-setup，不行。因为USB ADSL MODEM的设备是/dev/usb/ttyACM0，而不是一般的eth0。而且我这边要求使用pppoa，而不是pppoe。怎么办？大家帮帮忙吧！

...全文

59 23 打赏收藏转发到动态举报

写回复

用AI写文章

23 条回复

切换为时间正序

请发表友善的回复…

发表回复

ravenkatte 2003-08-03

打赏
举报

哎，将近一个月了。还是没解决……

8月5号回来揭帖。。。。。

own8888 2003-07-16

打赏
举报

还在用修改配制文件的方法??太落伍了吧.http://www.roaringpenguin.com/下载GUI方式的拨号软件其他的不用管了.

own8888 2003-07-16

打赏
举报

在KDE桌面环境下保证系统能够正常认识到网卡,REDHAT自身带有PPPOE的功能但是设置很麻烦,不符合大家的需求,现在的人要求简单.LINUX的程序员从来都不为用户去考虑.给你个软件他可以在桌面下拨号,设置很简单,和在WINDOWS下拨号一样.但是在新建连接的时候填用户名的时候有点要注意的，WINDOWS下的用户名是XXXXXXX@ADSL,@后面的ADSL是域名,记住在这个软件里有个单独填域名的地方,所以填用户的时候只要填@前面的部分就可以了http://www.roaringpenguin.com/这个站点有需要的软件到DOWNLOAD栏目下,找到RPM包记得要下载GUI的.

liuyingbo 2003-07-15

打赏
举报

看看这个有用否？？
记得搞定后写过报告给大家共享哦！！

PC上配置PPPoA
Set IP addressing to automatically obtain an IP address.
Set WINS to use DHCP for WINS resolution.
Ensure that no default gateway is set.
It may be necessary to set a domain name because DHCP cannot pass
this information
Cisco CPE Configuration for PPPoA
cbos>enable
Password:
cbos# set nat enable
NAT is now enabled
You must use "write" then reboot for changes to take effect.
cbos# set ppp wan0-0 login
User name for wan0-0 has been set to testcpe.
cbos# set ppp wan0-0 password
Password for wan0-0 has been set to cisco.
cbos# set ppp wan0-0 ipcp 0.0.0.0
PPP wan0-0 IPCP Address set to 0.0.0.0
cbos# set int wan0-0 close
cbos# set int wan0-0 vpi 1
cbos# set int wan0-0 vci 32
cbos# set int wan0-0 open
cbos# set int eth0 address 172.22.10.254
eth0 ip address changed from 10.0.0.1 to 172.22.10.254
cbos# set int eth0 netmask 255.255.255.0
eth0 netmask changed from 255.255.255.0 to 255.255.255.0
cbos# set dhcp server enable
DHCP Server enabled
cbos# set dhcp server pool 0 ip 172.22.10.0
Pool 0 IP parameter is now 172.22.10.0
cbos# set dhcp server pool 0 netmask 255.255.255.0
Pool 0 netmask parameter is now 255.255.255.0
cbos# set dhcp server pool 0 gateway 172.22.10.254
Pool 0 gateway parameter is now 172.22.10.254
cbos# set password exec
Exec Password Change Successful!
cbos# set password enable
Enable Password Change Successful!
cbos# write
NVRAM written.

Cisco DSLAM Configuration for PPPoA
hostname 6260
! Subtending Port - Will set as shutdown
interface atm0/2
shutdown
slot 1 atuc-1-4dmt
!
dsl-profile fast
dmt codeword-size downstream 16 upstream 16
dmt bitrate maximum interleaved downstream 8032 upstream 832
!
interface atm1/1
dsl profile fast
atm pvc 1 32 interface atm0/1 1 35
Cisco LS1010 Configuration for PPPoA
interface ATM 0/1/2
no ip address
no ip directed-broadcast
no ATM ilmi-keepalive
ATM pvp 1 interface ATM 0/0/2 1
Cisco 7200 Configuration for PPPoA
aaa new-model
AAA authentication ppp default local
!
!
username password
!
!
interface ATM 2/0.1 multipoint
no ip directed-broadcast
PVC 1/35
encapsulation aal5mux ppp Virtual-Template 2
!
!
interface FastEthernet 4/0
ip address 172.22.32.1 255.255.255.0
no ip directed-broadcast
!
!
interface Virtual-Template 2
ip unnumbered FastEthernet 4/0
no ip directed-broadcast
peer default ip address pool
ppp authentication pap
!
!
ip local pool 172.22.40.10 172.22.40.25

minl 2003-07-13