linux插入U盘时，怎样查看/dev/sd*的设备详细信息

[axxbest]

请问各位高手linux插入U盘时，怎样查看/dev/sd*的设备详细信息,例如厂商信息，序列号等等。。。多谢

[hhyh612]

可以用fdisk -l /dev/sd*看到一些

[ShowMan]

dmesg 可以看到内核报出的信息，包括楼主所说的。
/proc/partition 可以看到一些设备信息
更全面的在/sys中。/sys/devices里记录了所有的USB信息。。

[pottichu]

lsusb -v

[axxbest]

我用lsusb 可以得到USB设备的信息，可是我怎样才知道它是对应/dev/sda /dev/sdb 还是其他的sd*呢？

[fleiou2008]

当你插上U盘时会自动显示你所要的信息

[lophyxp]

lshal

[lophyxp]

刚看了一下，还是dmesg来查看，主要看最后2、30行的输出即可。

比如我的移动硬盘显示：
usb 2-4: new high speed USB device using ehci_hcd and address 3
usb 2-4: New USB device found, idVendor=152d, idProduct=2338
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 2-4: Product: USB to ATA/ATAPI Bridge
usb 2-4: Manufacturer: JMicron
usb 2-4: SerialNumber: 2222963011A7
usb 2-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access ST315003 41AS PQ: 0 ANSI: 2 CCS
sd 4:0:0:0: [sdb] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 38 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb:<5>sd 4:0:0:0: Attached scsi generic sg2 type 0
sdb1 sdb2
sd 4:0:0:0: [sdb] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: checktime reached, running e2fsck is recommended
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.

[steptodream]

有很多方法哦

dmesg 这个比较好 可以看到系统所有硬件的信息

[fantasy614]

dmesg | grep

[delphiwcdj]

同意 用dmesg较好