Possible mismatch between the reported error with code = 0x81070504

lyhuc 2010-06-18 03:49:11
有谁帮我看一下我的MOSS 日志出现这样的错误应该怎么解决?

06/18/2010 15:30:49.00 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/DocLib/Forms/AllItems.aspx”的网站。
06/18/2010 15:30:49.00 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/DocLib/Forms/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.00 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/Shared Documents/Forms/AllItems.aspx”的网站。
06/18/2010 15:30:49.00 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/Shared Documents/Forms/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.02 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/DocLib1/Forms/AllItems.aspx”的网站。
06/18/2010 15:30:49.02 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/DocLib1/Forms/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.02 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/Lists/Calendar/calendar.aspx”的网站。
06/18/2010 15:30:49.02 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/Lists/Calendar/calendar.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.03 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/Lists/Tasks/AllItems.aspx”的网站。
06/18/2010 15:30:49.03 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/Lists/Tasks/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.03 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/Lists/Team Discussion/AllItems.aspx”的网站。
06/18/2010 15:30:49.03 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/Lists/Team Discussion/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.05 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/DocLib/Forms/AllItems.aspx”的网站。
06/18/2010 15:30:49.05 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/DocLib/Forms/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.05 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/Shared Documents/Forms/AllItems.aspx”的网站。
06/18/2010 15:30:49.05 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/Shared Documents/Forms/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.05 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/DocLib1/Forms/AllItems.aspx”的网站。
06/18/2010 15:30:49.05 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/DocLib1/Forms/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.06 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/Lists/Calendar/calendar.aspx”的网站。
06/18/2010 15:30:49.06 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/Lists/Calendar/calendar.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.06 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/Lists/Tasks/AllItems.aspx”的网站。
06/18/2010 15:30:49.06 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/Lists/Tasks/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:49.08 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8kh7 High 没有名称为“/zhaoshang/Lists/Team Discussion/AllItems.aspx”的网站。
06/18/2010 15:30:49.08 w3wp.exe (0x1E80) 0x192C Windows SharePoint Services General 8e2r Medium Possible mismatch between the reported error with code = 0x81070504 and message: "没有名称为“/zhaoshang/Lists/Team Discussion/AllItems.aspx”的网站。" and the returned error with code 0x80070002.
06/18/2010 15:30:50.30 OWSTIMER.EXE (0x0B60) 0x203C Windows SharePoint Services General 0 Medium Entering MRU trim routine.

没有名称为“/zhaoshang/Lists/Team Discussion/AllItems.aspx”的网站实际上是存在的
...全文
136 2 打赏 收藏 转发到动态 举报
写回复
用AI写文章
2 条回复
切换为时间正序
请发表友善的回复…
发表回复
FreeSeagull 2010-06-18
  • 打赏
  • 举报
 回复
如果确实存在，检查_vti_priv目录下的.snf文件。
Justin-Liu 2010-06-18
  • 打赏
  • 举报
 回复
网站找不着了
BURNINTEST--硬件检测工具
PassMark BurnInTest V5.3 Copyright (C) 1999-2008 PassMark Software All Rights Reserved http://www.passmark.com Overview ======== Passmark's BurnInTest is a software tool that allows all the major sub-systems of a computer to be simultaneously tested for reliability and stability. Status ====== This is a shareware program. This means that you need to buy it if you would like to continue using it after the evaluation period. Installation ============ 1) Uninstall any previous version of BurnInTest 2) Double click (or Open) the downloaded ".exe" file 3) Follow the prompts UnInstallation ============== Use the Windows control panel, Add / Remove Programs Requirements ============ - Operating System: Windows 2000, XP, 2003 server, Vista (*) - RAM: 32 Meg - Disk space: 6 Meg of free hard disk space (plus an additional 10Meg to run the Disk test) - DirectX 9.0c or above software for 3D graphics and video tests (plus working DirectX drivers for your video card) - SSE compatible CPU for SSE tests - A printer to run the printer test, set-up as the default printer in Windows. - A CD ROM + 1 Music CD or Data CD to run the CD test. - A CD-RW to run the CD burn test. - A network connection and the TCP/IP networking software installed for the Network Tests Pro version only: - A serial port loop back plug for the serial port test. - A parallel port loop back plug for the parallel port test. - A USB port loop back plug for the USB port test. - A USB 2.0 port loop back plug for the USB 2.0 port test. - PassMark ModemTest V1.3 1010 (or higher) for Plugin Modem testing. - PassMark KeyboardTest V2.2 1011 (or higher) for Plugin Keyboard testing. - PassMark Firewire Plugin V1.0 1000 (or higher) and a 揔anguru FireFlash?drive for Plugin Firewire testing. (*) Windows 2000 does not support the CD-RW burn test. The advanced RAM test is only available under Windows 2000 and Windows XP professional (the other RAM tests are supported under the other OS's). Users must have administrator privileges. Windows 98 and Windows ME ========================= Windows 98 and ME are not supported in BurnInTest version 5.3 and above. Use a version of BurnInTest prior to 5.2 for compatibility with W98 and ME. Windows 95 and Windows NT ========================= Windows 95 and NT are not supported in BurnInTest version 4.0 and above. Use a version of BurnInTest prior to 3.1 for compatibility with W95 and NT. Version History =============== Here is a summary of all changes that have been made in each version of BurnInTest. Release 5.3 build 1035 revision 4 WIN32 release 10 November 2008 - Lenovo China specific build. Lenovo system detection changes. Release 5.3 build 1035 revision 3 WIN32 release 7 November 2008 - Lenovo China specific build. Lenovo system detection changes. Release 5.3 build 1035 revision 2 WIN32 release 6 November 2008 - Lenovo China specific build. Lenovo logo and Lenovo system detection changes. Release 5.3 build 1035 WIN32 release 5 November 2008 - Lenovo China specific build. Changes include: Lenovo logo added, Lenovo system support only, 32-bit BurnInTest restricted to 32-bit Windows and BurnInTest run as administrator. Release 5.3 build 1034 WIN32 release 3 October 2008 - Correction to setting the CD burn test drive in preferences. - Changed the mechanism to check for the required DirectX Direct3D as the previous method did not work on some system (some W2003 servers). - Enhanced the mechanism to report memory hardware errors in the Memory torture test. Release 5.3 build 1033 WIN32 release 1 October 2008 - Changes to correct a BurnInTest crash problem on some systems. When the disk and standard RAM tests are run for many hours, BurnInTest may have disappeared with no error message. Release 5.3 build 1030 WIN32 release 25 September 2008 - Changes to investigate a BurnInTest crash problem on XP SP3. Release 5.3 build 1028 WIN32 release 11 September 2008 - Two 2D Video memory test crash bug workarounds implemented. Crashes in (i) DirectX DirectShow and (ii) ATI atiumdag.dll library. - A hang on startup has been corrected. A 2 minute timeout has been added to the collection of system information. - Video playback, Hard disk and CD/DVD test 'no operations' error reporting changed. - When BurnInTest crashes, it will not generate a "minidump" file. Minidumps will need to be sent to Microsoft as per the normal process. However, a log entry will be added to the normal BurnInTest log. - Changes to trace logging to reduce activity when trace logging is not turned on. - Note: We have seen a report of the Video Playback failing (crash) due to a faulty video codec, ffdshow.ax. If you are using this we suggest you try a different Video file and codec. Release 5.3 build 1027 revision 0003 WIN32 release 19 August 2008 - Changed the 2D test to wait for the Video Playback test in order to allow memory allocation for the Video playback test. - Changed the Memory test to wait for the Video Playback test and 3D test to allow memory allocation for these tests. - Minor changes to the No operation error watchdog timer for the CD and Hard disk tests. - Minor correction to the Butterfly seek test. - Video playback trace logging increased. Release 5.3 build 1027 revision 0002 WIN32 release 19 August 2008 - Video playback trace logging increased. Release 5.3 build 1027 WIN32 release 31 July 2008 - Corrected a bug where BurnInTest would fail to start if Activity trace level 2 logging (debug level logging) was turned on and the Logging Summarize option was also selected. - Minor change to the serial port test where, if "Disable RTS/CTS and DSR/DTR test phase" was selected the DTR and RTS lines would be explicitly disabled to prevent any toggling of these lines. Previously these where enabled, but not explicitly toggled. Release 5.3 build 1026 WIN32 release 17 July 2008 - Updated Level 2 and Level 3 CPU cache information for newer Intel CPU's. - Updated the detection of Hyperthreading and the number of logical CPUs for a new Intel CPU. Release 5.3 build 1025 WIN32 release 11 July 2008 - Corrected a Disk test bug where on rare occasions a verification error is incorrectly displayed. This is during the random seeking phase of the "Random data with random seeking" test mode and only occurs with some specific test settings. Release 5.3 build 1024 WIN32 release 10 July 2008 - Workaround for the rare crash bug in Vista in atklumdisp.dll at address 0x730676ae. - Added trace debug information for BurnInTest startup and the 3D test. Release 5.3 build 1022 WIN32 release 12 June 2008 - Corrected a bug where the 2D video memory test in BurnInTest v5.3.1020 and v5.3.1021 would report a "Not enough video memory available for test" error if the test was run a couple of times (without closing BurnInTest). Release 5.3 build 1021 WIN32 release 5 June 2008 - 32-bit BurnInTest PRO 5.3.1020 would not start on Windows 2000. This has been corrected. Release 5.3 build 1020 WIN32 release 29 May 2008 - BurnInTest could have crashed on accessing bad video memory hardware in the 2D test. This problem is now just reported as an error (and BurnInTest) continues. - When BurnInTest crashes, it should now generate a "minidump" file to help debug which system component caused the failure (32-bit Pro version only). - Other minor changes. Release 5.3 build 1019 WIN32 release 16 May 2008 - Corrected rare crash bugs in the 2D and Video tests. - Added a hot Key, F4, to set the auto run flag and run the tests (i.e. set "-r" and then run the tests). - Other minor changes. Release 5.3 build 1018 WIN32 release 16 April 2008 - Added an operation watchdog timer for all tests. In rare cases, a single test can stop in the operating system - i.e. there is a problem in the operating system/ device driver that prevents control being returned to the BurnInTest for that test. This was added for specialized serial port hardware that could lockup after several hours of testing. Release 5.3 build 1017 WIN32 release 3 April 2008 - Corrected the Advanced Network test to run on non-English Operating Systems. Release 5.3 build 1016 WIN32 release 17 March 2008 - Added additional USB 2.0 Loopback plug test initialization to ensure plugs are in a 'clean' state when starting the USB tests. This was added due to reported USB data verification errors after scripted USB testing across multiple reboots. Release 5.3 build 1015 WIN32 release 27 February 2008 - Increased error reporting detail for the standard RAM test, when the -v command line option is used. Release 5.3 build 1014 WIN32 release 30 January 2008 - Corrected a problem where the loopback sound test could run out of memory if run for several days. Release 5.3 build 1013 WIN32 release 31 December 2007 - Improved the reporting of COM port errors such that in the rare case a COM port locks up in the Operating System, the error is still reported. - Corrected a bug, where in rare cases, the result summary could be duplicated in a log file. - Updated license management, in an attempt to remove a rare crash on startup. Release 5.3 build 1012.0002 WIN32 release 31 October 2007 - New build of Rebooter (64-bit Windows correction). - Clarifications in the help file. Release 5.3 build 1012 WIN32 release 17 October 2007 - Changed the Standard Network Test, "Test all available NICs" such that the number of Network Addresses specified in Preferences->Network will be the number of NICs tested. This will error faulty NICs that are not detected by the BurnInTest auto NIC detection mechanism. - Minor change to the 2D memory test when run with the 3D test (multiple large windows) and the RAM test. Aimed at correcting sympton: Access Violation 0x00404CF9. - Corrections to the mapping of paths with ".\". Release 5.3 build 1011 rev 2 WIN32 release 17 September 2007 - Modified the Multi-Process torture test to better describe a new error message introduced in V5.3.1010. Release 5.3 build 1011 - Public release WIN32 release 11 September 2007 - Corrected a bug where "Limited Evaluation Version" could be displayed even after BUrnInTest is licensed (problem introduced in 32-bit BITPRO V5.3.1010). - Changed the Sound test to allow any of the tests (Wave, Midi or MP3) to be excluded from testing by blanking the filename. - The Command line parameter "-j" (cycle disk test patterns after each test file) could fail during the Random data test due to the mechanism used in BurnInTest. The Random data test is now excluded from the test when (and only when) the "-j" command line parameter is specified. - In rare circumstances, the 2D test number of operations could potentially overflow and become negative. This has been corrected. - In rare circumstances, BurnInTest could hang if there was a system problem in rebooting the system (ie. it failed to shutdown) using PassMark Rebooter. This has been corrected. Release 5.3 build 1010 - Public release WIN32 release 28 August 2007 WIN64 release 28 August 2007 - As BurnInTest exercises system components, it is possible for faulty hardware or device drivers to cause software exceptions. These are normally seen as Windows reporting an "Access Violation". Changes have been made to handle these errors for the memory tests (for faulty RAM) and direct device driver access (for some device driver errors), as well as overarching more generic handling of these types of errors. - Corrected a software failure bug on startup (particularly Vista) where a DirectX function was causing software failures in "dsetup.dll". - Updated the "Activity Event" generated with the periodic results summary report to be numbered (from 1 upwards) such that when "Logging->Summarize", these events are not summarized. - Corrected a bug where the HTML log name could include a duplicate of the filename prefix. - Updated to the Common Errors section of help. Release 5.3 build 1009 - Public release WIN32 release 16 August 2007 - Corrected a 'zip' version cleanup problem. Release 5.3 build 1008 - Komputer Swiat Expert magazine version WIN32 STD release 14 August 2007 Release 5.3 build 1007 - Public release WIN32 release 7 August 2007 - Corrected a disk test startup problem for some large RAID systems when SMART testing is selected. - Added additional logging for the disk test when an error occurs. - Changed the 3D test when run with the 2D EMC test to be 'behind' the EMC scrolling H's test. Allowed the test to be easily exited when running the 3D test in Fullscreen mode. - Minor corrections to the Advanced Network test. - Changed the log file reference of "Network Name" to "Computer Name". WIN64 specific: - MMX and 3DNow! are obsolete for native 64-bit applications. BurnInTest has been changed to show "NA" (Not applicable) in the test window for these tests. Release 5.3 build 1006 - Limited release WIN32 release 17 July 2007 - Standard Network Test changes: - Increased the number of destination IP addresses from 4 to 6. - Added an option (default) "Test all available NICs", which will force traffic down every system NIC with a basic algorithm of NIC1 to IP Address 1, NIC2 to IP Address 2 etc. - Advanced Network test changes: - Simplified the test. - Removed the UDP and FTP options. The Standard Network test can be used as a UDP test. - Removed the Advanced Network test specific logging, and included all relevant logging in the standard BurnInTest logging mechanism. - Replaced the complicated dynamic balancing of any system NIC to any Endpoint NIC with a simpler static allocation on test startup. - Changed the error detection mechanism to detect errors much more quickly. - Re-worked the errors reported. - Changed the CPU throttling mechanism to reduce the CPU load. - Updated endpoint.exe. - Removed checkend.exe (now obsolete). - Changed the logging rollover to work with the output of interim results (e.g. per 1 minute). Previously rollover only occurred on error events written to the log. This also corrected an issue where interim results summary logging could be written to the physical disk with some delay (based on Windows disk caching). - Corrected the "Unknown" reporting of some operating systems. - Added the skipping of the Butterfly seek disk test when run on Vista and insufficient privileges. A notification of this is logged. - Intel Quad core L2 cache size reporting has been added. - Added new SMART threshold descriptions. - Added new disk test options, accessed via command line parameters: /ka: keep disk test files in all cases (c.f. /k keep disk test files on error). /j: cycle patterns between test files. Note: Random seeking will be skipped in this case. This option has been added to allow multiple test patterns to be used across very large disks. - Added an option to make some test settings unavailable to the user. An example configuration file available on request. Release 5.3 build 1005 0001 (STD only) - Public release WIN32 release 29 June 2007 - Corrected a bug introduced in v5.3.1005.0000 STD (only) where the disk test would use up more and more system resources, thus causing test failures. Release 5.3 build 1005 rev 0003 (PRO only) - Limited public release WIN32 release 21 June 2007 - Correction to the behavior of a static RAM test pattern (rather than the default Cyclic pattern). Release 5.3 build 1005 rev 0002 (PRO only) - Limited public release WIN32 release 15 June 2007 - The "Select all CD/DVD drives" preferences option has been made user configurable, rather than using pre-defined test settings. Release 5.3 build 1005 rev 0001 (PRO only) - Limited public release WIN32 release 13 June 2007 - Bug correction for the CD auto selection feature. Release 5.3 build 1005 - Public release WIN32 release 18 May 2007 WIN64 release 18 May 2007 - In a number of cases, such as when specifying the post test application, uppercase application names were not accepted. This has been corrected. - The default font height in the 2D scrolling H's test should have been Arial 9. This has been changed. - The BurnInTest Video playback test incompatibility with Nero 6 and Nero 7 has been resolved. - The BurnInTest disk test throughput for dual core systems has been improved. Release 5.3 build 1004 rev2 - Limited release WIN32 release 8 May 2007 - Changed the Standard Network Test to better report packet error ratios. In addition, a new warning has been added to indicate that errors have been detected but not enough packets have been attempted to be sent to determine accurately whether the configured error ratio has been exceeded. - Corrected a bug where the "append to existing" logging option did not work across scripted reboots, and a new log file was created instead of appending to the existing log file. - If the 3D test was running, then BurnInTest blocked a forced close of BurnInTest, this blocking has been removed. - Changed the PASS and FAIL windows so they can now also be closed by selecting the Windows Close "X" button. Release 5.3 build 1004 - Public release WIN32 release 10 April 2007 WIN64 release 10 April 2007 - Corrected a problem introduced in BurnInTest v5.2 where BurnInTest could run out of memory (the main symptom) when tests where run for long periods (> 12hours). WIN64 specific: - Corrected a bug where the number of cores reported on a Quad core system was incorrectly reported as CPU packages. Release 5.3 build 1003 - Limited release WIN32 release 3 April 2007 - A new 2D GUI (Graphical User Interface) test has been added to the standard 2D graphics test. - Resolved an issue where BurnInTest would fail to start on Vista systems with DEP enabled for all programs. - On some systems, the Disk test could pause momentarily even when a duty cycle of 100% was specified. This pause has been removed. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipped as they are unavailable for testing. - Minor bug corrections. Release 5.3 build 1002 rev 0001 - Limited release WIN32 release 16 March 2007 - Changes to the new 3D test: - Added a Full screen non-windowed test for the primary monitor, where the resolution can be selected from those supported by the Graphics card. - Added the user option of changes the vertical sync in the full screen non-windowed test to be either the Maximum rate of the graphics card, or to be the rate of the monitor (this may prevent some flicker). - Added a more complex water texture using DirectX Vertex Shader 2.0 and Pixel Shader 2.0 effects (if supported by the graphics card). This applies to 3D test windows that are 800x600 or larger. - Changed some error messages from window displays (that require user intervention) to standard error reporting. Added new 3D error messages and more detail in the error reporting. - Changed the definition of an operation to be a successfully displayed frame. - Changed the definition of a cycle to be 2000 frames. - Changed 2D video memory test to wait until the 3D test starts (as per V5.2 and earlier). - A new version of rebooter has been included. - If BurnInTest is started with the -p command line parameter (to use the bit.exe directory for files such as the configuration file), then BurnInTest will start rebooter with the -p option. This can be useful when running BurnInTest and Rebooter from a USB drive. Release 5.3 build 1002 - Limited release WIN32 release 19 March 2007 - Corrected a bug introduced in V5.2 where selecting accumulated logging could lead to rebooter failing to launch. Release 5.3 build 1001 - Limited release WIN32 release 16 March 2007 - The 3D test has been improved. The 3D ball test has been replaced with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been changed to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been added for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. Release 5.3 build 1001 - Limited release WIN32 release 16 March 2007 - The 3D test has been improved. The 3D ball test has been replaced with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been changed to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been added for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. - BurnInTest uses DirectX 9.0c. This version of BurnInTest uses a more recent version of the Microsoft DirectX Direct3D component, October 2006. BurnInTest has been modified to detect and install this component (file) if it does not exist. - A command line parameter -X has been added to skip the DirectX version checking on BurnInTest start-up. - With the recent introduction of multi-monitor support for the Video Playback test, it is now more likely that the system will run out of memory when running multiple video tests simultaneously, particularly when more memory intensive codecs are used. A specific Insufficient resources to complete test message has been added in this case, rather than the previous more generic unrecoverable error message. The video test have been changed to attempt recovery from this and the more generic unrecoverable error, by closing the current video and opening the next. The logging detail has been increased. - Note: The BurnIntest sample video pack has been altered with the DivX Compressed Video file being removed due to the DivX codec failing with this Video file when used with multiple simultaneous Video playbacks. Access Violation: 0x69756e65. See: http://www.passmark.com/download/bit_download.htm - The video description is now collected for a larger range of Vista systems. - Windows 98 and ME are no longer supported. Please see www.passmark.com for a link to an older version of BurnInTest that will support W98/ME. Release 5.3 build 1000 rev2 - Limited release WIN32 release 9 March 2007 - A command line parameter -P has been added to allow the BurnInTest directory to be used rather than the User's personal directory. This may be useful when running BurnInTest from a USB drive for example. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipped as they are unavailable for testing. - A change has been made to support Hmonitor temperature monitoring on Vista. - A number of undocumented command line parameters have been documented: -B: BurnInTest will generate additional Serial port test information when activity trace level 2 logging is set. -E [data]: Specifies the test data to use in the serial port test. -M: Automatically display the Machine ID Window when BurnInTest is started. -U: Force BurnInTest to set logging on at startup. Release 5.3 build 1000 - Limited release WIN32 release 8 March 2007 - Changed the 2D and Video playback tests to support multi-monitor testing. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipped as they are unavailable for testing. Release 5.2 build 1006 - Limited release WIN32 release 1 March 2007 - Corrected a bug where BurnInTest would fail to start on certain Vista systems. - Corrected a bug where some files where the full path was not specified would be incorrectly referenced in the Program Files directory, rather than the user personal directory. Release 5.2 build 1005 - Public release WIN32 release 21 February 2007 WIN64 release 21 February 2007 - Updated the Graphics card description for Windows Vista systems. - Updated the Advanced Network test to indicate that elevated administrator privileges are required when running on Vista. - Moved files from the Program files directory for the Advanced Network Test (BurnInTest, EndPoint and CheckEnd). Specifically, the User Application directory is now used for the temporary test FTP files and the User Personal directory is now used for the log and configuration files. - Updated the cleanup process for when running the "zip" version of BurnInTest Professional from a CD or flash drive. - Updated the help link from the Windows Start, All Programs, BurnInTest menu for the browser based help. - Corrected a bug where Disk preferences displayed in the Preferences window would be incorrect when the system had no Floppy drive. - Corrected a bug where the Advanced Network test might not have been displayed until after entering the Duty Cycle selection (ie. just chaning from the standard network test to the advanced test). - Corrected a USB bug in Beta 5.2.1003 where the test would not run if there where there insufficient USB loopback plugs attached to the system. - Included a new version of PassMark Rebooter that supports Windows Vista. Release 5.2 build 1004 - Public Pre-release WIN32 release 13 February 2007 - Updated the reported Operating system for the various Vista product editions. - Disk test settings can be configured for "Automatically Select all Hard Disks", rather than using defaults. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipped as they are unavailable for testing. - Corrected a bug where temperature information could be duplicated in the HTML report. - Corrected a bug certain 'save report' warning messages could be truncated. - Help file updated. Release 5.2 build 1003 - BETA RELEASE ONLY WIN32 release 23 January 2007 - Changed the USB preferences and test to more completely check for the PassMark USB Loopback plugs and ignore any device that is not a PassMark USB Loopback plug (due to reported incorrect detection with another hardware device). - Increased Trace level debugging for Intel temperature monitoring. - Corrected a bug with the disk test introduced in 5.2.1001 Release 5.2 build 1002 - BETA RELEASE ONLY WIN32 release 22 January 2007 - Increased the number of disks that can be tested from 20 to 26. - Updated BurnInTest to reflect that Temperature monitoring with Intel Desktop utilities is supported. Intel Desktop utilities essentially is a replacement for Intel Active Monitor for newer Intel motherboards. - Increased Trace level debugging for Intel temperature monitoring. Release 5.2 build 1001 - BETA RELEASE ONLY WIN32 release 19 January 2007 - Windows Vista support. - The Block size used in the disk test is now configurable per disk. The default block size has been increased from 16KB to 32KB. - An option has been added to automatically detect all of the CD and DVD drives for the CD test (as per the disk test). This may be useful when testing across many systems with different optical drive configurations. - Increased Trace level debugging for Intel temperature monitoring. - Bugs corrected: - Disk preferences - in rare cases invalid default values could be set for a disk, an invalid value error would occur and the values would need to be manually corrected. Release 5.2 build 1000 - limited release WIN32 release 8 January 2007 - Windows Vista support. - Reduced the need for elevated administrator privileges: - Changed the location of the disk test files from the root directory of the test volume to a BurnInTest data files subdirectory (e.g from "C:\" to "C:\BurnInTest test files\") - Moved many of the files from the Program Files directory to the User directory for Windows 2000, XP and Vista. When running BurnInTest on Windows 98, ME or from a key.dat file (e.g. from a USB drive with a licensed key.dat) BurnInTest will store these files in the BurnInTest program directory. Specifically, the following files have been moved from the Program Files directory to the User Personal directory, e.g. Vista - "C:\Users\\Documents\PassMark\BurnInTest\" XP - "My Documents\PassMark\BurnInTest\" Files: Configuration file, Configuration load/save default directory, Save log file and image default directory, parallel port override "ioports.dat" directory, default command line script directory, log file directory, video file directory, Plugin directory, machine id file directory, Run as script default directory, CD burn image, Advanced network FTP temp files. - Replaced the Help system with Browser based help. - Changed the Disk test block size from 16KB to 256KB. It is planned to make this user configurable in the next build. Release 5.1 build 1014 WIN32 release 2 November 2006 WIN64 release 2 November 2006 - Corrected a bug when running on Vista, where the Standard network test would report a checksum error when the transmitted data was correct. - Corrected a bug where BurnInTest would not stop the tests based on the number of test cycles for the Plugin test or the Advanced Network test. - Made the "Could not set USB2Test mode" USB error message more specific by adding an error for insufficient system resources. - Changed the preferences Window to fit on an 800x600 resolution screen. - Corrected a minor bug in Activity level 2 trace logging with the 'hide duplicate' preference setting. - Corrected a minor memory leak if the 2D test failed to initialize (such as due to a DirectX problem). - The Parallel port test may now be used on Windows Vista. Specifically, the PassMark device driver used for the parallel port test could not be loaded on 64-bit Windows Vista as it was not digitally signed. It is now digitally signed. Release 5.1 build 1013 revision 0002 WIN32 release 19 September 2006 WIN64 release 19 September 2006 - Corrected an Access Violation problem reported by a customer on a particular MB. Release 5.1 build 1013 WIN32 release 7 September 2006 WIN64 release 7 September 2006 - The "Notes" section has been added to the Customer results certificate. - Some additional configuration range validation has been added. Release 5.1 build 1012 WIN32 release 15 August 2006 - Corrected a false report of a "Unable to get disk volume extent information" for the disk butterfly seek test. - Advanced Network test changes for errors: "Corrupt header - packet discarded" and "Advanced Network test timed out" - Advanced Network test Endpoint changes for problems on non-English Operating Systems and systems with the Windows "Network Interface" performance statistics disabled. - SMART parameters on a Samsung Hard Disk caused BurnInTest to fail when running the disk test with SMART thresholds enabled. This has been corrected. - The 2D scrolling H's test could display corrupt characters on the second and subsequent test run. This has been corrected. - A problem with the Integer maths test where the results could display a negative number of operations has been resolved. - Minor improvements to the help file. - HTML help file added for Windows Vista and Longhorn Server. - Minor improvements to the Error Classification file (error descriptions). - Some CD Trace level 1 logging has been moved to trace level 2. - Trace level 1 logging has been added to the test closing software. - New build of Endpoint.exe (1.0 1010). Release 5.1 build 1011 WIN32 release 6 July 2006 - New Advanced Network test error reporting added in the previous build V5.1 1010 has been removed. - A broader range of USB 2.0 Loopback plugs can now be used with BurnInTest. Release 5.1 build 1010 WIN32 release 4 July 2006 - Corrected the HTML report description of the L2/L3 CPU cache when the L3 cache size could not be determined. Advanced network changes: - Endpoints ran at 100% CPU load as they contained no throttling. This impacted their ability to effectively handle multiple threads handling TCP/UDP messaging. Throttling has been added to the EndPoint side to reduce CPU load. This does not greatly impact Network load. - Throttling on the BurnInTest side contained a sleep that was not insignificant. This could have impacted the BurnInTest data test thread to to handle incoming TCP and particularly UDP messages. This sleep has been reduced and other throttling parameters changed to suit. (ie. smaller sleeps more often). - EndPoint systems with x NICs (where x > 1), reported themselves as an Endpoint with x NICs, x times. Effectively registering with BurnInTest as x * x EndPoint NICS. This impacted the effectiveness of the load distribution to EndPoint NICs. An Endpoint system now only registers the once with BurnInTest. - The BurnInTest side did not report data verification Checksum errors for full duplex testing. This error determination has been corrected and reporting added. - The Test statistics sent from the Endpoint to BurnInTest could fail if the statistics block is split across 2 lower level TCP send packets. This could lead to problems like incorrect reporting of Endpoint determined checksum errors, Endpoint load and load balancing. Further it would lead to an Endpoint testthread being put into an endless TCP send loop. This would eventually bring the Endpoint system to its knees as more and more of these test threads go into this state. This has been corrected. - The Data Received reported by BurnInTest was double counted. This has been corrected. Release 5.1 build 1009 WIN32 release 23 June 2006 - Plugin test error classifications were incorrect in the log file detailed description. - Corrections to the advanced network test (BurnInTest and EndPoint). Release 5.1 build 1008 - limited release WIN32 release 20 June 2006 - Advanced network changes corrections. Most notably, a bug where part of the payload data could be lost if the payload block (eg. 1000 bytes) was split across 2 (or more) lower level TCP packets. - Added version reporting for Endpoints. Release 5.1 build 1007 - limited release WIN32 release 16 June 2006 Advanced network changes: - Corrected a BurnInTest access Violation introduced in V5.1 1006. - The Endpoint now reports its version and build to BurnInTest and BurnInTest reports this in the log file if it is an earlier version than expected. This is to help avoid the situation where old Endpoints are run on the Network, that may not be compatible with the version of BurnInTest being run by the user. - Removed a timeout report in a specific instance where a timeout is not an error. - Changed the Endpoint rebalancing and polling to occur less often after the test has been running 3 minutes. This is to help allowing the handling of polling from a larger number of multiple copies of BurnInTest on the Network. - Added a connection retries on failure for the Endpoint. - Corrected a memory leak in the Endpoint. - Increased the number of sockets supported. - Corrected some Advanced Network error classifications. Release 5.1 build 1006 - limited release WIN32 release 14 June 2006 - Improvements to the Advanced Network test (both BurnInTest V5.1 1006 and EndPoint V1.0 1004) to remove corrupted false packet corruption errors. Improved the timeout recovery mechanism. Added some validation to the Windows Network performance data used for NIC utilization. - Changes to the collection of Disk drive information on startup to try to resolve a startup issue on Systems with a large number of physical drives and 'unusual' WMI namings. Release 5.1 build 1005 WIN32 release 2 June 2006 - Corrected a bug in the Advanced network test where the test would not recover from timeout errors. The test appears to be running, but the results are 0 and the number of connected End Points are 0. Also improved the retry on timeout mechanism. - Removed some duplication in error reporting in the Advanced Network test. - Changed the Advanced Network display of Utilization to ensure a maximum of 100% displayed. - Corrected an Advanced Network test bug where the number of Errors reported in the test window would not take into account the corrupt packet threshold, and an error would be added for each occurrence of the corrupt packet (rather than when the user set threshold was reached). Release 5.1 build 1004b WIN32 release 25 May 2006 (not publicly released) - Corrected the default Advanced network corrupt packet threshold value. - Updated the data entry fields in the CD preferences when a different CD drive is selected. - The Advanced Network specific log files should be concatenated for a script run. This was only occurring for the first NIC under test. The concatenation will now occur for each NIC under test, when run from a script. - Corrected a bug where a log file name specified with no directory path could be incorrect. - Corrected a bug where the customer "Test Certificate" report incorrectly translated the "%" character from a customer specific HTML template. eg would be translated to . - The "Advanced Network test error" (215) has been removed and replaced with other existing error messages 214, 219, 220, 221 or 222. - Added the Customer name and Technician name to the text and HTMl reports. Previously, this information was only included in the "Test Certificate" report. - We have added a commandline option to specify the Serial port test data as a constant value. To specify specific data for the Serial port test you should specify e.g. "bit.exe /E 23" from the command line where 23 is in decimal and will be used for all test data (instead of random data). The vales should be between 0 and 255. Release 5.1 build 1004 WIN32 release 19 April 2006 (not publicly released) - Added the COM port speed of 921600 Kbits/s for RS 422/RS485 testing. - Changed the CD test to ensure that the entire test CD data is not cached on systems with a large amount of RAM. - Added a -M command line option to display the Machine ID window automatically when BurninTest starts. - Changed the 2D EMC scrolling H's test to work on multiple monitors were the resolution on each is different. - Changed log files such the syntax "..\" could be used for files in the directory up a level. - Minor correction to the advanced network test. Release 5.1 build 1003 WIN32 release 18 April 2006 WIN64 release 18 April 2006 - Changed the Advanced network test to allow a corrupt packet threshold value up to 1 million. - Bundled a new version of rebooter. Release 5.1 build 1002 WIN32 release 11 April 2006 WIN64 release 11 April 2006 - Corrections to the translation of V4.0 to V5 configuration files. Note: Configuration files in V5.x builds prior to V5.1 1002 could become corrupted if a V4.0 configuration file is loaded. - Corrected a bug where the main Window size and location were not restored on restarting BurnInTest. - Changes to the SMART attribute logging to support a greater range of Disk drive device drivers. Added additional Activity Level 2 trace logging. - Added an option to use CTS (Clear To Send) flow control in the loop back stage of the COM port test. - Corrected a bug where the CPU L3 cache could be reported as -1. - Help file updates. Release 5.1 build 1001 WIN32 release 30/March/2006 - Digitally signed the BurnInTest application to allow it to run under Windows Server "Longhorn". Note, previously only the installation package was digitally signed. - Updated the reported Operating system descriptions, including: - Windows Vista - Windows Server "Longhorn" - Corrected a bug where the Advanced network information was not displayed on the main window when it was run from a script. - The Advanced Network Corrupt threshold packet has been changed to produce an error every time the error is received after the threshold is reached. - Corrected the reporting of "Network, Packet discarded due to corrupt header" as a Network test error. - Corrected a bug where a new log file was not created if (only) the log prefix changed during the running of a script file. - Split the "Network, Advanced Network test error" error into 6 errors: "Network, Advanced Network test error" "Advanced Network Socket error" "Advanced Network Send error" "Advanced Network Send error - no data sent" "Advanced Network Receive error" "Advanced Network Receive error - no data received" Added either activity trace 1 or trace 2 logging for each of the errors, with additional information where available. - Added additional Serial port activity trace 2 logging. Including the logging of all transmit buffer data when the /B command line is used. Release 5.1 build 1000 WIN32 release 27/March/2006 (not a public release) Added the following features: - Create the log file directory specified in the Logging Options if it does not exist. - Condense the Advanced Network Test log files to one log file per IP address per script run, when run from a script. - Added an option to summarize duplicate errors in the log file. - Color coded errors based on severity in the Detailed event log Window and the HTML log file. - Added an option to only create a log file when BurnIn actually runs a test as opposed to every time BurnIn is executed. - Added a warning if a test thread completes with 0 cycles and 0 operations. - In the results summary html file, inserted more spacing between the 揘otes? and 揇etailed Event Log? - Changed the Activity Trace file format to be the same as the log file, ie. text or HTML, rather than always text. - The 2D 揝crolling H抯?test will now display across multiple screens/displays ?i.e. all active displays. - A threshold has been added for the 揷orrupt header ?packet discarded?event in the advanced network options so that a 揊ail?is not produced when that is the only thing that produces errors. - Added looping capability in scripting. LOOP n { ? } where n is the number of times to repeat the commands in the brackets. - Corrected a bug where PASS could be displayed if the Advanced Network test was the only test running, but it failed. Release 5.0 build 1001 WIN32 release 9/March/2006 - Corrected a bug where Network directory paths were not accepted, eg. for the log file name and post test application file name. - The CPU maths test has been improved to better load up all CPU's. Previously BurnInTest started a maths test thread per physical CPU package. BurnInTest has been changed to start a maths test thread per CPU (= num. physical CPU packages x num. CPU cores x num. logical CPUs). - The CPU preferences have been changed to allow the CPU maths test to be locked to any CPU (ie. select a CPU from a list of CPU's where the number of CPU's = num. physical CPU packages x num. CPU cores x num. logical CPUs). - The Parallel and Serial port error message have been modified in the case where a test plug may not have been connected to indicate that the user should check this. - Corrected a bug where a licenced version could display the message "[limited evaluation version]" Release 5.0 build 1000 WIN32 release 24/February/2006 WIN64 release 24/February/2006 NEW TESTS & IMPROVEMENTS TO EXISTING TESTS BurnInTest Standard and Professional versions. - Added a customer style results certificate. This will save the log file in HTML format but from the perspective of a end customer. This report style can be tailored by the user (through changing an HTML template). - An MP3 playback test has been added to the Sound test. - A color printer test has been added. - A new post test option to allow the results to be printed automatically at the end of a test has been added. - Added new Post-test action options of: - Optionally allow the user to "run an external program & exit" after BIT has been manually stopped. Modify the $RESULT variable to "PASS (manual abort)" or "FAIL (manual abort)" for this case. - Allow the results window to be displayed for all post test options (except Reboot). - Added new Pre-test actions to allow an external application to be run and have BIT wait for the application to exit. On continuing, BIT will run the subscript file (of scripting commands) if it has been created. - Changed the manual Stop buttons, to abort the running of a script (rather than just the current test). BurnInTest Professional specific. - Added a "Plugin" test that allows users to develop their own BurnInTest test modules for specialized hardware. Three external plugins may be specified at once. - A Modem test has been added to BurnInTest as a Plugin. PassMark's ModemTest Version V1.3 (latest build) is required. - A KeyBoard Test has been added to BurnInTest as a Plugin. PassMark's KeyboardTest Version V2.2 (latest build) is required. - A Firewire Test has been added to BurnInTest as a Plugin. PassMark's free Firewire plugin is required and a "Kanguru FireFlash" drive is required. - A new advanced network test has been added. BurnInTest Professional only. - The Memory test now allows the user to specify the type of test pattern to be used. - Testing with the USB 2.0 Loopback plug has been improved. When used with USB 2.0 Loopback device driver V2.0.1002, error details will now be reported for: CRC error reported by USB Host controller BIT STUFF error reported by USB Host controller DATA TOGGLE MISMATCH error reported by USB Host controller STALL PID error reported by USB Host controller DEVICE NOT RESPONDING error reported by USB Host controller PID CHECK FAILURE error reported by USB Host controller UNEXPECTED PID error reported by USB Host controller DATA OVERRUN error reported by USB Host controller DATA UNDERRUN error reported by USB Host controller BUFFER OVERRUN error reported by USB Host controller BUFFER UNDERRUN error reported by USB Host controller NOT ACCESSED error reported by USB Host controller FIFO error reported by USB Host controller TRANSACTION (XACT) ERROR reported by USB Host controller BABBLE DETECTED error reported by USB Host controller DATA BUFFER ERROR reported by USB Host controller In the case of these errors, BurnInTest will re-attempt the operation. The user can set the Error reporting to be skipped for the initial recovery attempt. IMPROVEMENTS TO TESTING FACILITIES - Added a disk autoconfig, such that when tests are started, the disk drives and settings will be defaults to all disks (exc. CD/DVD). This may be useful when testing multiple systems with different hard disk drive letters. - Store the position of the Main window on exiting BurnInTest. On starting BurnInTest, position the main window as saved; on starting tests, position the test windows as saved. - Allow a "drag & drop" of the Configuration file directly on the BurnInTest program icon. - Allow testing 99.5% to 100% of disk, instead of 94%, for disks that do not contain the Windows directory and do not contain a swap file. - Added the ability to log interim results, which may be useful for unstable systems. - AMD and Intel Dual core reporting added. - New L2 CPU cache sizes added to reports. - CPU support for SSE3, DEP and PAE added to reports. - Shortcut of "F1" for contextual help added to all Windows. - Improve the flexibility in specifying the EXECUTEWAIT scripting command for sleeper. - Updated logging header information with the hard and optical drive model. - The 2D and 3D tests have been updated to use DirectX 9.0c. - User interface updated. - The HTML report format has been improved. - The BurnInTest configuration file extension has been renamed from .cfg to use .bitcfg, to ensure the configuration file is associated with BurnInTest. - An error message indicating that accumulated log files are not supported when run from CD or DVD has been added. - To allow smaller test files with very large disks, the minimum disk test file size has been reduced from 0.1% to 0.01% of the disk space. - Log events were previously shown as "INFORMATION" if they were low level errors, or simply additional information (not errors). "INFORMATION" now refers to a low level error, and "LOG NOTE" now refers to additional information (that is not in the error count). - Improved the specific detail of the Serial Port errors detected. BurnInTest now reports framing errors, buffer overrun errors, input buffer overflow errors, parity errors and Transmit buffer full errors as specific error messages (rather than a broader error description). - Added the /k command line so the user can specify not to delete HDD test files if an error occurs. - Increased Activity trace level 1 error logging for Serial port testing. - Increased Activity trace level 1 error logging for Hyper threading detection. - Bundled a new version of the Rebooter program. - Improved the Serial port error logging (displaying baud rate) and increased Activity trace level 1 error logging (displaying erroneous data). - Modified the Window sizes to help improve navigation on smaller displays (i.e. 640x480). - The CPU load for the Standard and Torture RAM tests has been made more linear with the duty cycle setting. Note: This means that compared to the previous build of BurnInTest, less RAM test operations will be run per second (when the duty cycle is less than 100). - Additional debug code and very minor changes in the Loopback sound test. - The Post test option of "Run external application and exit" has been modified such that if no external file is specified, this Post test option will just exit BurnInTest. - Allowed the full range of PassMark USB1 loopback plugs to be used with BurnInTest Professional. - Added additional Activity Trace level 2 logging. - The delay inserted between packets in the USB2 test, when the duty cycle is less than 50, has been changed from at least 1ms to at least 1ms to 50ms (for a Duty Cycle of 49 down to 0). - The subscript commands to configure BurnInTest from an external application (i.e. specified in the bit-script-input.txt file and run by specifying either a pre-test or EXECUTEWAIT application) has been changed to allow "LOAD" commands (in addition to "SET" scripting commands). - Renamed the "Error" log to "Event" log. - Changed the order of the items in an Event log line, such that the Severity is the first item. - The EXECUTEWAIT script command has been modified such that the external application may provide an input script file (of SET... commands) to be run after the EXECUTEWAIT application closes. This allows external applications to define test environment parameters (such as the serial number and machine type). - Added scripting commands: SETSERIAL "1234-shdfgdhs-GHGHG" SETMACHINETYPE "HP XPS800" SETNOTES "Test notes defined by the external application." SETLOG "\Program Files\Plugin\plugin_log" SETPLUGIN "\Program Files\Plugin\plugin.exe" - Added POST TEST application parameter substitution to allow values to be passed to an external application at the end of a test. These are: $RESULT - "PASS" or "FAIL" will be substituted. $SERIAL - The serial number will be substituted. $MACHINETYPE - The machine type will be substituted. $NOTES - The notes will be substituted. - Added extra logging for memory allocation errors in the disk test - Added "log bad sector increase" and "bad sector threshold" options to disk test. This resulted in a change to the configuration file format and required additional code to automatically convert from old formats. - Modified the user interface in the preferences window for the disk test and the CD test - Improved the handling of USB 2.0 loopback plugs recovery from sleep states. BUG CORRECTIONS - Corrected a bug where the System and Application events logged in the BurnInTest Trace logs were wrong if the event log had reached its maximum size. - Checks that the Sound test files (WAV and MIDI) exist have been added. - The continuous auto updating of the USB image (USB Loopback plug vs. USB 2.0 Loopback plug) on the main window has been removed. This is now updated on BIT startup, selecting Refresh in USB preferences or on starting a test. If there is a serious USB problem, this (together with the USB 2.0 Loopback device driver, V2.0.1002) will avoid the possibility of BurnInTest locking up. - Corrected a bug with the Butterfly seek mode of the Disk test. This was found to occur with FAT32 disks where the Cylinder size was relatively small and the Sector size relatively large. - Reset Defaults on the Configuration Page now resets the Auto Stop Value. - Reset Defaults on the Configuration Page now resets the color indicators. - The CD test has been modified to skip invalid files either with "?"'s , to avoid reporting errors that are due to the CD test media filenames. - The Network test results window scroll bar has been corrected. - The Memory torture test could fail on some systems with a small amount of RAM and relatively high memory fragmentation. This has been corrected. - Scripting correction for .cmd files. - Corrected a bug that caused problems when running the disk test with SMART monitoring turned on. This problem only occurs on a small number of HDD's. - Corrected memory leaks - On occasion, the measured waveform from the loopback sound test may have been slightly altered on starting or stopping all tests, possibly enough to trigger an error. This has been resolved. - If an error occurred in the final second of a test, the error may have been logged but not included in the big PASS/FAIL results window. This has been corrected. - After running a script file that loaded a configuration file, that had a full path specified, the Save and Load configuration menu options no longer worked. This has been corrected. - Previously, the Version of BurnInTest was only written in the First log file after starting BurnInTest. This log line is now written in all log files. - For USB2 tests that have read or write failures, the Windows error codes are now included in the level 2 Activity trace log. - Command line parameters may now be passed to a PreTest application. - Log files may now use a single static filename. This may be useful when the log file is to be parsed by an external program. - Corrected a bug where the Plugin test would stop prematurely. - Corrected the specification of the Scripting EXECUTEWAIT filename. - Changed Script processing such that a script is aborted if a scripting error is encountered and Stop on error is selected. - Added an indication on the main window that a script is currently running ("Script currently running"). - Corrected the serial port test to identify non-existing plugs when the Disable RTS/CTS and DSR/DTR testing has been selected. - Corrected the display of strange results (666666) reported by a user, related to copy protection. - Fixed a memory leak bug in the MBM interface which caused memory allocation errors. - Added BIT version number to the ASCII log file. - Fixed a bug with the 3D Test that was causing it to stop before the autostop timer period - Changed an error in the tape drive test to a warning if tape drive doesn't support setting drive parameters. History of earlier releases: Please see http://passmark.com/products/bit_history.htm Documentation ============= All the documentation is included in the help file. It can be accessed from the help menu. There is also a PDF format Users guide available for download from the PassMark web site. Support ======= For technical support, questions, suggestions, please check the help file for our email address or visit our web page at http://www.passmark.com Ordering / Registration ======================= All the details are in the help file documentation or you can visit our sales information page http://www.passmark.com/sales Compatibility issues with the Network & Parallel Port Tests =========================================================== If you are running Windows 2000 or XP, you need to have administrator privileges to run this test. Enjoy.. The PassMark Development team
acpi控制笔记本风扇转速
笔记本的风扇控制 ---------------------------------------- 09 November 2006. Summary of changes for version 20061109: 1) ACPI CA Core Subsystem: Optimized the Load ASL operator in the case where the source operand is an operation region. Simply map the operation region memory, instead of performing a bytewise read. (Region must be of type SystemMemory, see below.) Fixed the Load ASL operator for the case where the source operand is a region field. A buffer object is also allowed as the source operand. BZ 480 Fixed a problem where the Load ASL operator allowed the source operand to be an operation region of any type. It is now restricted to regions of type SystemMemory, as per the ACPI specification. BZ 481 Additional cleanup and optimizations for the new Table Manager code. AcpiEnable will now fail if all of the required ACPI tables are not loaded (FADT, FACS, DSDT). BZ 477 Added #pragma pack(8/4) to acobject.h to ensure that the structures in this header are always compiled as aligned. The ACPI_OPERAND_OBJECT has been manually optimized to be aligned and will not work if it is byte-packed. Example Code and Data Size: These are the sizes for the OS- independent acpica.lib produced by the Microsoft Visual C++ 6.0 32- bit compiler. The debug version of the code includes the debug output trace mechanism and has a much larger code and data size. Previous Release: Non-Debug Version: 78.1K Code, 17.1K Data, 95.2K Total Debug Version: 155.4K Code, 63.1K Data, 218.5K Total Current Release: Non-Debug Version: 77.9K Code, 17.0K Data, 94.9K Total Debug Version: 155.2K Code, 63.1K Data, 218.3K Total 2) iASL Compiler/Disassembler and Tools: Fixed a problem where the presence of the _OSI predefined control method within complex expressions could cause an internal compiler error. AcpiExec: Implemented full region support for multiple address spaces. SpaceId is now part of the REGION object. BZ 429 ---------------------------------------- 11 Oc
eac3to V3.17
v3.17 * updated libFLAC to version 1.2.1 * added a flush after every log line to help GUIs * "eac3to some.mpls" now also works if the stream files aren't there, anymore * fixed: number of subtitles was not appended to demuxed subtitles' file name * fixed: dialnorm removal (for Nero decoder) failed with some 2.0 TrueHD files v3.16 * added undocumented "-no2ndpass" switch to turn off 2nd pass processing * fixed: two pass processing sometimes produced superfluous sup files * fixed: MPG/EVO/VOB audio tracks with "PES extension 2" were not detected * fixed: very small W64/RF64 files were not detected correctly * fixed: when processing was aborted, log file was sometimes not created * fixed: sometimes specifying a title number addressed the wrong HD DVD title v3.15 * "24.975" is now interpreted as "25.000/1.001" * Blu-Ray "sup" are demuxed with DTS set to 0 again, proper fix will come later * fixed: error code not set for "source file format could not be detected" * fixed: audio resampling from/to 24.975 didn't work properly * fixed: WAV files beginning with lots of zeroes were sometimes not accepted v3.14 * WAV reading was broken for all but very small files (introduced in v3.13) v3.13 * fields and frames are counted and displayed separately now * added DIRAC bitstream parser * added support for "-24.975" and "-changeto24.975" * Blu-Ray subtitle demuxing: PTS value is now written to both PTS + DTS * joining MKV files is now declined with a proper error message * last chapter is now removed, if it's less than 10 seconds from end of movie * fixed: "-normalize" didn't work with stdout, anymore * fixed: audio delay was incorrect when 1st m2ts part contained no audio data * fixed: very small WAV files were not detected correctly * fixed: "eac3to source.eac3 dest.dts -core" crashed v3.12 * fixed: track languages for HD DVD discs were not shown * fixed: MLP channel order was wrong for some specific channel configurations * fixed: "DirectShow reported 255 channels" happened sometimes v3.11 * fixed: MKV subtitle track language wasn't shown v3.10 * Blu-Ray title listing now includes chapter information * fixed: v3.09 didn't show track languages for Blu-Rays v3.09 * added support for MKV "SRT/UTF8", "SRT/ASCII", "ASS" and "SSA" subtitles * increased some internal buffers to avoid AC3 overflow in the "thd ac3 joiner" * fixed: frame counting didn't work for MKV video tracks * fixed: video track FPS change was sometimes declined * fixed: video tracks with "strange" FPS were sometimes handled incorrectly * fixed: clipping removal 2nd pass was executed even for "stdout" * fixed: "eac3to -test" displayed an outdated Nero download link * fixed: specifying a specific playlist still used default playlist's chapters v3.08 * fixed: reading physical disc speed was abysmal (introduced in v3.07) * fixed: read error from physical drive resulted in crash v3.07 * added support for MKV video tracks without sequence headers in bitstream * added support for old style MKV AAC tracks * added support for various MKV "A_MS/ACM" audio formats * added support for various MKV "V_MS/VFW/FOURCC" video formats * added warning for tracks where bitstream parsing failed * demuxing a video track now also complains about video gaps/overlaps * the "-check" option now also complains about video gaps/overlaps * optimized memory allocation * fixed: adding subtitle caption count to filenames sometimes didn't work * fixed: subtitle caption counts in log sometimes had wrong track numbers * fixed: all non-supported MKV tracks shared the same description * fixed: incorrect framerate mismatch complaint was shown for pulldown sources * fixed: FLAC tracks in MKV files don't slow down detection, anymore * fixed: source file detection read 300MB from every source file v3.06 * added MKV reading/parsing support * added demux support for MKV (E-)AC3, DTS(-HD), AAC, MPx, FLAC and WAV tracks * added demux support for MKV "modern style" MPEG2, VC-1 and h264/AVC tracks * reading from (HD) DVD and Blu-Ray drives uses different reading APIs now * empty tracks in TS/m2ts container are not listed, anymore * for 24.000 fps video tracks a little warning is displayed now * when demuxing subtitle files, the number of captions is added to the filename * timestamp derived FPS is used for gap checking instead of video bitstream FPS * fixed: 44.1khz AC3 encoding was still broken * fixed: zero byte stripping pass was done for true 24bit TrueHD tracks * fixed: downconverting WAV files with 0x3f channel mask didn't work * fixed: log output "remaining delay [...]" was sometimes wrong for AC3 tracks * fixed: silent frame creation was tried for E-AC3 although it can't work v3.05 * warning is shown if h264 video bitstream contains "full range" flag * h264 video bitstream "full range" flag is automatically removed * you can disable removal of the "full range" flag by doing "-keepFullRange" * added reader for external DVD, HD DVD and Blu-Ray SUP files * external SUP files can be delayed now * number of HD DVD and DVD subtitles in SUP track is counted and displayed * number of forced and non-forced Blu-Ray subtitles in SUP track is displayed * "-check" option now also works for demuxed audio, video and subtitle tracks * when reading from physical disc drive, 2KB (instead of 1MB) blocks are read * improved automatic skipping over damaged first 5MB of TS/m2ts files * fixed: resampling and Surcode encoding didn't work in one step * fixed: TRP detection crashed * fixed: track listing sometimes contained tracks without description * fixed: h264 with missing framerate in 1st sequence header made eac3to crash * fixed: some AC3WAV files were not detected correctly * fixed: video frame count was not displayed when 2nd pass was executed v3.04 * video track framerates are now shown with up to 3 decimals, if necessary * m2ts/TS framerate is determined by interpreting video track timestamps * m2ts/TS framerate is displayed in the format description (if available) * warning is shown if container timestamps don't match video framerate * warning is shown if video bitstream has a non-standard framerate * video without framerate information: container framerate is used * video without framerate information: framerate can be set (e.g. "-23.976") * video without framerate information: new framerate is written to bitstream * remaining non-fixed audio delay is now shown in log * command prompt colors are restored after eac3to has run through * fixed: 2-pass processing for stripping zero bytes sometimes crashed * fixed: CA (Conditional Access) tracks were shown as "Unknown audio track" v3.03 * fixed: MPEG2 1088 to 1080 cropping was still incomplete v3.02 * fixed: VC-1 stream handling was broken * fixed: destination file extension "*.lpcm" didn't work with 2pass processing * fixed: MPEG2 1088 to 1080 cropping was incomplete * fixed: no log was being created when "temp file could not be interpreted" v3.01 * fixed: m2ts LCPM demuxing didn't work with v3.00 * fixed: TrueHD -> TrueHD+AC3 conversion didn't work with v3.00 v3.00 * broken AC3, DTS, AAC and MPx streams are now automatically repaired * errors in TS/m2ts files are now reported (with runtime) and ignored * damaged first max 5MB and max 5% of a TS/m2ts file are automatically skipped * video/audio tracks which can't be parsed, are now demuxed in raw form * added support for "line 21" closed captions in ATSC/NTSC broadcasts and DVDs * added reading of movie / network name from "line 21" XDS information * for gaps, edits & repairs > 1000ms eac3to now inserts silence by default * for gaps, edits & repairs < 1000ms eac3to now loops audio by default * option "-silence" forces eac3to to insert silence instead of looping audio * option "-loop" forces eac3to to loop audio instead of inserting silence * newly encoded AC3 frame is now used for "silence" instead of file's 1st frame * increased reading block size (might improve reading performance) * optimized TS/m2ts demuxing performance * optimized MPEG2, VC-1 and h264 parsing performance * command line output is colored now (e.g. errors drawn in red) * MPEG2 1920x1088 bitstream is now automatically patched/cropped to 1920x1080 * log file now contains "" and "<ERROR>" indicators * workaround for movie playlists which want the same m2ts file played twice * added version check for eac3to (doh!) * when a read error occurs, reading is tried again up to 3 times * (E-)AC3 frames with -0db dialnorm are now automatically patched to -31db * updated to newer libAften build -> fixes 44.1khz encoding * fixed: sometimes "The last DTS frame is incomplete" was a false alarm * fixed: mkvtoolnix version check didn't work, anymore * fixed: errors were meant to be output to stderr, but they weren't * fixed: automatic gap/overlap fixing with AAC targets aborted processing * fixed: positive edit began a bit too early * fixed: two ID3 tags after each other made eac3to fail detecting the format * fixed: some VOB files were not detected properly v2.87 * fixed: negative edit was done too late (introduced in v2.86) v2.86 * fixed: "1:some.ac3" instead of "1: some.ac3" failed for 2 digit track numbers * fixed: "eac3to source movie.mkv" demuxed video instead of muxing to MKV * negative edit now begins at the specified runtime instead of ending there v2.85 * using "eac3to source video.h264" doesn't demux audio/subtitle tracks, anymore * using "eac3to source movie.*" demuxes video, audio and subtitle tracks * using "eac3to source 1: video.* 2: audio.*" demuxes the specified tracks * AC3 and E-AC3 dialnorm removal now uses "-31db" instead of "-0db" * workaround for DTS files where last byte is missing in each audio frame * fixed: v2.84 sometimes crashed when parsing HD DVD XML files * fixed: v2.84 sometimes chose incorrect XML file * fixed: v2.84 sometimes chose wrong m2ts playlist file * fixed: some actions were eventually applied twice when "-2pass" was used * fixed: AAC encoding quality "quality=0.0x" was passed to Nero as "0.x" v2.84 * fixed: 2nd pass gap removal was tried (and failed) for TrueHD+AC3 targets * fixed: processing aborted when trying to fix gaps in PCM destination files * fixed: more than one RAW/PCM overlaps resulted in lost sync (since v2.81) * fixed: demuxing TrueHD+AC3 stream by title number didn't renew the AC3 part * new option for removing or looping audio data, e.g. "-edit=0:20:47,-100ms" * title sorting criteria changed: resolution is more important than runtime * new option "-lowPriority" sets eac3to to background/idle priority * libav warnings are now assigned to the affected audio track * fixed: "lossless check failed" false alarms for seamless branching movies * fixed: spike removal filter was not active for the very last overlap/gap * improved muxing h264 streams which begin with double sequence headers * source files are now opened with "share read + write access" * destination files are now opened with "share read access" v2.83 * fixed: gap/overlap correction didn't work for FLAC and WAV files * fixed: when clipping was detected, 2nd pass was not always executed correctly v2.82 * fixed: sometimes eac3to stalled before processing (introduced in v2.81) v2.81 * audio gap/overlap fixing is now automatically done in a 2nd pass * option "-normalize" maximizes the volume of the audio data, needs 2 passes * audio clipping is detected and automatically removed in a 2nd pass * "-2pass" activates 2 pass mode (can speedup seamless branching processing) * superfluous zero bytes are now automatically removed in 2nd pass * "-phaseShift" shifts surround channel phase by 90?for DPL II downmixing * spike removal post processing filter now always produces 16bit samples * empty channels are now reported by the bitdepth analyzer as "no audio data" * option "-shutdown" shuts the PC down automatically after processing is done * the HD DVD XPL with the longest title is now loaded instead of VPLST000.XPL * eac3to can now open selected XPL files (e.g. "eac3to ADV_OBJ\VPLS002.XPL") * eac3to can now open selected mpls files (e.g. "eac3to PLAYLIST\00002.mpls") * fixed: TrueHD streams starting with a non-major header failed to decode * fixed: WAV files created by eac3to with empty channels had incorrect header * fixed: RAW/PCM gap/overlap remover sometimes didn't work correctly v2.80 * fixed: FLAC files with missing runtime information were not accepted * gone back to old VOB/EVO auto delay calculation method, more reliable for me * improved TS broadcast audio delay detection * added support for constant bitrate AAC encoding * added support for AAC encoding 0.00 and 1.00 quality v2.79 * improved m2ts file joining overlap detection (mainly for interlaced video) * vob/evo audio delay detection now uses "vobu start presentation time" * program streams which are neither VOB nor EVO are now reported as "MPG" * resampling is now automatically activated for AC3/DTS encoding, if necessary * "Mersenne Twister" random number generator is used for dithering now * zero padded DTS tracks are now displayed as such * fixed: 32bit PCM conversion to floating point was broken * fixed: with some (rare) movies first subtitle began after 50 minutes runtime * only plugins with the extension *.dll are loaded now v2.78 * fixed: h264 interlaced muxing to MKV could result in too long runtime * fixed: transcoding DTS-HD/E-AC3 core sometimes failed to work correctly * improved TS/m2ts audio delay detection * added filter to remove spikes when fixing gaps/overlaps in RAW/PCM audio * each eac3to instance has its own log file now * playlist output now also works with "-log" option * default bitrate for mono & stereo AC3 encodes lowered to 448kbps * default bitrate for mono & stereo DTS encodes lowered to 768kbps * it should be possible to handle TsSplitter splitted TS files via "+" now v2.77 * pcm/raw audio delay is now applied before resampling and fps change * parsing of command line with multiple sources files sometimes failed v2.76 * "-slowdown" now works to convert 24.000 movies to 23.976 * "-speedup" now works to convert 24.000 movies to 25.000 * option "-xx.xxx" (e.g. "-24.000") sets the FPS of the source track * option "-changeToXx.xxx" (e.g. "-changeTo23.976") changes video/audio FPS * modified FPS information is written to video bitstream (VC-1, MPEG2, h264) * demuxing with FPS change option now activates audio track transcoding * SSRC resampling parameters modified slightly to reduce steepness and ringing * fixed incorrect h264 movie slowdown gap/overlap complaints * fixed DTS-HD High Resolution bitrate calculation * dithering is now done differently per channel v2.75 * added (E-)AC3 5.1 "EX" detection * added (E-)AC3 2.0 "Surround" detection * added (E-)AC3 2.0 "Headphone" detection * NeroAacEnc is now fed with up to 32bit float (if available) * resampling option "-quality=low|high|ultra" not supported, anymore * new option "-fast" switches SSRC resampler to fast, but low quality mode * new option "-r8brain" forces use of r8brain resampler instead of SSRC * added support for AES3 PCM streams in TS container * started working on encoder plugin interface v2.74 * "-demux" failed to work for DTS-HD and "TrueHD/AC3" tracks in v2.73 * fixed: DTS-HD tracks could make processing abort at the very end of the movie v2.73 * changed TS demuxing logic to make the broken (!) new SkyHD broadcasts work * DTS core and "TrueHD/AC3" AC3 parameters are displayed separately now * when using "-core" option, eac3to now bases its decisions on core parameters * added WAV/W64/RF64 read/write support for 32bit PCM and 32/64 bit float * option "-full" allows WAV/W64/RF64 output to be native (default <= 24bit PCM) * Surcode DTS encoding is now done with up to 32bit float (if available) * Aften AC3 encoding is now done with up to 64bit float (if available) v2.72 * fixed: per channel bitdepth analyzation didn't work correctly v2.71 * fixed: v2.70 detected Blu-Rays as "TS" without chapters and track languages * fixed: TrueHD downmixing to 2.0 didn't work v2.70 * added floating point support to the complete audio processing chain * added gain functionality, e.g. "-3db" or "+1db" * bitdepth analyzation is now done separately for each channel * fixed: when decoding lossy audio with libav, peaks were clipped incorrectly * fixed: libav MP1/2/3 decoder output was cut down to 24bit * fixed: with some EVO sources the AC3 track was not listed * fixed: if no key frame was found, h264 track in m2(ts) was not listed * fixed: video/audio data before first PAT/PMT was discarded * Blu-Ray chapters now don't contain link points, anymore, unless necessary * added 10db boost to LFE channel, when "-down2" and "-mixlfe" are used * ArcSoft output can now be overwritten to "-2", "-6", "-7" or "-8" channels v2.69 * added high precision SSRC resampler * resampling "-quality" now allows "low", "high" (SSRC) or "ultra" (r8brain) * resampling quality now defaults to "high" (SSRC) * bitdepth is now analyzed separately for original vs. processed data * fixed: downmixing 16 bit DTS tracks to 5.1 or 2.0 didn't work * fixed: Sonic Decoder was incorrectly assumed to decode XXCh DTS files to 6.1 * for movies the Haali Muxer can't handle "-seekToIFrames" is suggested now v2.68 * fixed crash when transcoding Blu-Ray/HD DVD track to FLAC v2.67 * information about HDCD and real bitdepth is now stored into FLAC metadata * information about real bitdepth is now read from FLAC metadata * PTS break: PTS is increased by 1 frame (fixes some false overlap warnings) * fixed: video gap log text was sometimes not correct (runtime information) * added undocumented switch "-neroaacenc="c:\whatever\neroaacenc.exe"" * error log messages are now output to stderr instead of stdout * improved "which mkvtoolnix is currently installed?" check * fixed: mkvtoolnix version check "Oct" date was not interpreted correctly v2.66 * changed eac3to to allow AAC encoding with 7.1 channels (for new Nero encoder) * fixed AGM creation for files bigger than 4GB * added support for Nero's new AAC Encoder download URL * lowered volume of error/success sounds * when there are 2 similar playlists the one with less chapters is ignored now v2.65 * automatic channel remapping for 6.1 tracks with wrong channel mask * automatic channel remapping for ArcSoft DTS decoder 6.1 tracks * fixed: TrueHD -> Surcode encoding didn't work, anymore * fixed: MPEG2 + h264 video gap/overlap removal didn't work properly v2.64 * added channel mask reading support to Blu-Ray PCM track parser * added channel mask reading support to TrueHD parser * added channel mask reading & writing support to FLAC decoder / encoder * changed 5.x channel mask from $03x to $60x * changed 6.x channel mask from $13x to $70x * mono wavs output now creates correct names for some channel masks * when transcoding 6.1 sources to PCM, 7 channel doubling is activated now * fixed: DTS channelmask detection was incorrect for very strange configs * fixed: sometimes the h264 video stream of a Blu-Ray m2ts was not detected v2.63 * fixed: incorrect detection of 6.0 DTS tracks as 5.0 * fixed: incorrect libav DTS channel remapping for 6.x or 7.x tracks * fixed: incorrect ArcSoft DTS channel remapping for "6.0" and "2/2.1" tracks * fixed: v2.61+62 incorrectly decoded 16bit TrueHD tracks to 24bit FLAC/WAV/RAW * fixed: some DTSWAV files made HDCD decoder crash * fixed: DTSWAV and AC3WAV samplerate and bitdepth were reported incorrectly * improved DirectShow channel configuration reporting * undocumented option -progressnumbers now outputs "analyze:" and "process:" v2.62 * fixed: downmixing 16 bit 7.1 DTS tracks to 5.1 stopped working in v2.61 v2.61 * option "-no7doubling" is not supported anymore * option "-double7" added which upconverts 6.1 to 7.1 * added read/write support for Sony wave64 (*.w64) format * added read/write support for RF64 wave64 (*.rf64) format * added write support for AGM format * true bitdepth (e.g. 18 bits) is written to extensible wav header now * when reading 16/24 (true/storage) WAV files, zero bytes are stripped now * added HDCD detection for WAV and FLAC files * added HDCD detection for PCM tracks in VOB/EVO/m2ts containers * added HDCD decoder written by Christopher Key * added new option "-decodeHdcd" to decode HDCD information * HDCD track -> lossy format: HDCD decoding is automatically activated * when DTS-MA and TrueHD tracks are decoded, a check for HDCD is done * fixed some incorrect DTS channel masks * added automatic libav DTS channel remapping * added automatic ArcSoft DTS channel remapping * added channel map manipulation to make funny DTS tracks decode with Sonic * added channel map manipulation to make funny DTS tracks decode with ArcSoft * added channel volume modification to undo ArcSoft mono surround splitting * for TrueHD+AC3 creation AC3 delay and gap correction are disabled now * fixed: DTSWAV and DTSAC3 readers reported too long runtime * fixed: sometimes processing aborted with a "bitdepth reducer" complaint v2.60 * fixed: in v2.59 "-analyzeBitdepth" stopped working for Blu-Ray TrueHD tracks v2.59 * extension ".thd+ac3" is supported now to define destination format * TrueHD tracks without AC3 core can be converted to TrueHD/AC3 now * demuxing a single-part Blu-Ray title keeps the original "TrueHD/AC3" data * demuxing a multi-part Blu-Ray title automatically redoes the AC3 substream * added workaround for Blu-Ray playlists with multiple last "invalid" parts * fixed: "-check" didn't work for LPCM tracks v2.58 * h264 parser rewritten: framerate, pulldown etc is detected reliably now * h264 pulldown is automatically removed from progressive movie sources now * h264 pulldown removal can be disabled by using "-keepPulldown" * h264 muxing now fully supports streams with mixed 23.976 and 29.970 content * h264 1920x1088 bitstream is now automatically patched/cropped to 1920x1080 * h264 filler data is now already removed during demuxing * h264 sources with funny framerates (e.g. Luxe.tv HD) are patched to 25fps now * mixed video/movie h264 streams are now always muxed with 29.970 timestamps * speedup/slowdown now changes framerate information in the h264 bitstream * options "-24p", "-60i" and "-30p" are no longer supported * fixed Blu-Ray seamless branching subtitle remuxing * added workaround for Blu-Ray playlists with a last small "invalid" m2ts part * bitdepth analyzation is now done for decoded FLAC, WAV, PCM, DTS MA, too * bitrate is now also reported for FLAC, WAV and PCM tracks * when encoding AC3, DTS or AAC, the encoding bitrate is reported * fixed: v2.57 incorrectly decoded 16bit TrueHD tracks to 24bit FLAC/WAV/RAW * (M2)TS discontinuities before the first unit start are ignored now * new option "-progressnumbers" replaces progress bar with percentage numbers v2.57 * added automated support for Nero AAC command line encoder * added "quality=0.xx" (0.00 - 0.99) parameter to control AAC encoder quality * added Nero AAC encoder check to the "-test" list * "-test" checks whether a new Haali Matroska Muxer version is available * "-test" checks whether a new MkvToolnix release build is available * "-test" checks whether a new MkvToolnix beta build is available * "-test" checks whether a new Nero AAC encoder version is available * added TRP container support (TS files without PMT/PAT) * parameter "-extensible" is no longer supported (it's default now) * new parameter "-simple" can be used to disable the "-extensible" wav header * decoded TrueHD tracks: bitdepth is now automatically analyzed in more detail * option "-analyzeBitdepth" manually activates extended bitdepth analyzation * DVB subtitle tracks are listed now - can't be demuxed, though * option "-check" doesn't fail on DTS Express tracks, anymore v2.56 * fixed: processing aborted when a VC-1 sequence end code was found v2.55 * AAC bitstream parser added * AAC auto detection added * AAC bitstream delay added * AAC bitstream gap/overlap correction added * AAC decoding (Nero & Sonic) added * old MP2 parser now "officially" and properly supports MP1, MP2 and MP3 * MP3 decoding (libav & Nero) added * added support for MPEG Audio version 2 and version 2.5 * added (limited) support for ID3, APE and LYRICS tags in MP3 and AAC tracks * improved VOB/EVO audio delay detection algorithm * detection and automatic skipping of invalid vob units * options "-60i" and "-24p" are no longer supported for MPEG2 video * improved detection of MPEG2 framerate / pulldown state / mode * improved MPEG2 muxing warnings * several bugs in MPEG2 video muxing fixed * fixed interlaced VC-1 muxing with user data (Nine Inch Nails) v2.54 * VC-1 pulldown removal rewritten (comparable to vc1conv 0.4, but faster) * VC-1 pulldown removal is activated by default * VC-1 pulldown removal can be manually deactivated by "-keepPulldown" option * VC-1 pulldown removal is also available and activated when muxing to MKV now * fixed Blu-Ray subtitle demuxing for seamless branching movies * better task separation when doing multiple operations with an audio track v2.53 * Blu-Ray PGS subtitle demuxing support added * added support for EVO/VOB subtitles which begin very late in the file * MPEG2 video muxing doesn't rely on GOP headers, anymore * all (M2)TS discontinuities are now reported with exact file position * fixed: reading language information from TS files didn't work correctly v2.52 * fixed muxing of MPEG2 broadcasts where "temporal_reference" overruns * MPEG2 bitstream headers are now updated correctly when speedup is performed * MPEG2 bitstream headers are now updated correctly when slowdown is performed * MPEG2 bitstream headers are now updated correctly when pulldown is removed * pulldown removal is now automatically disabled for MPEG2 broadcasts * AC3WAV (SPDIF formatted) support added v2.51 * DTS Express bitstream parser added * DTS Express auto detection added * DTS Express bitstream delay added * DTS Express bitstream gap/overlap correction added * DTS Express decoding (Nero & ArcSoft) added * fixed: 6.1 -> 7.1 channel doubling resulted in wrong channel order * added (undocum.) option "-no7doubling" to disable 6.1 -> 7.1 channel doubling * DTS tracks with funny speaker settings are displayed as "7.1 (strange setup)" * warning is displayed when decoding "7.1 (strange setup)" tracks with ArcSoft v2.50 * ArcSoft DTS Decoder DLL is now directly accessed instead of using DirectShow v2.49 * DTS parser sets correct channel mask now * DTS-HD parser now properly detects format, channels and samplerate * added support for ArcSoft DTS(-HD) Decoder * added several tweaks to make ArcSoft Decoder behave correctly * added ArcSoft test to the "-test" processing * made ArcSoft Decoder default for DTS and DTS-HD decoding v2.48 * 96kHz LPCM tracks in (M2)TS and EVO/VOB containers didn't work correctly * "Applying (E-)AC3 delay" now only shows if the bitstream is actually modified * fixed crash in MP2 reader when checking some PCM tracks * added support for MLP formats 13 - 16 * improved/corrected MLP channel descriptions * MLP parser sets correct channel mask * added proper channel remaps for libav MLP decoding of "funny" channel formats * added proper channel remaps for Nero MLP decoding of "funny" channel formats * added proper channel remaps for Nero AC3 decoding of "funny" channel formats * when doubling 7th channel the channel mask is set correctly now * channel mask is corrected if a decoder doesn't output all channels * channel mask is corrected if channel downmixing is performed v2.47 * improved detection of AC3/DTS tracks in TS/M2TS container * added support for Blu-Ray style LPCM tracks in TS container * fixed 44.1kHz AC3 tracks * fixed crazy audio delay values when no video track was detected * sometimes video/audio tracks were not properly detected in (M2)TS container * MPEG2 demuxing/remuxing incorrectly output the first sequence headers twice * sequence end codes are removed when demuxing video now, too * MPEG2 pulldown removal is automatically activated only for EVO HD sources now * MPEG2 pulldown removal can be manually activated by using "-stripPulldown" * MPEG2 pulldown removal can be disabled by using "-keepPulldown" v2.46 * MPEG2 muxing now fully supports streams with mixed 23.976 and 29.970 content * mixed video/movie MPEG2 streams are now always muxed with 29.970 timestamps * if a movie MPEG2 stream goes video, processing is automatically restarted * MPEG2 pulldown is now automatically removed whenever an MPEG2 stream is read * new option "-keepPulldown" can be used to disable MPEG2 pulldown removal * corrected default WAV channel masks for 4.0, 6.1 and 7.1 * added proper channel remaps for libav AC3 decoding of "funny" channel formats * added general channel mask support * WAV parser reads channel mask from extensible header * (E-)AC3 parser sets correct channel mask v2.45 * Blu-Ray angles are now reported as separate titles * duplicate playlists are not listed in the "folder view", anymore * reduced TrueHD and RAW/PCM gap/overlap threshold to 7ms * reduced (E-)AC3 gap/overlap threshold to 60% of the runtime of one audio frame * reduced MP2 gap/overlap threshold to 60% of the runtime of one MP2 frame * reduced DTS threshold to 60% of the runtime of one DTS frame, but at least 7ms * fixed: Blu-Ray chapter export sometimes wrote incorrect "00:00:00.000" items * improved handling of MPEG2 streams (changes from interlaced to progressive) * video information now shows "with pulldown flags", if applicable * removed "-ignoreDiscon" from help; hint is shown when a discontinuity occurs * added "-ignoreEncrypt" option; hint is shown when a source is encrypted * new option "-extensible" creates WAV files with a slightly different header * fixed some smaller bugs v2.44 * libav is now automatically used when Nero/Sonic decoders are not working * gap/overlap correction of RAW/PCM tracks sometimes aborted * rerunning de/remuxing to correct gaps/overlaps ignored RAW/PCM tracks * "lossless check failed" messages are surpressed on join points now v2.43 * added automatic Blu-Ray playlist parsing * added support for multi part (e.g. seamless branching) Blu-Ray titles * audio gap/overlap detection rewrite completed * added audio gap/overlap correction functionality * added Blu-Ray chapter support * log lines are now prefixed with a track identifier * RAW/PCM delay is used instead of bitstream delay, if possible * fixed: video framecount was missing v2.42 * added support for 16bit DTSWAV files * fixed: Blu-Ray TrueHD support was broken v2.41 * added full MP2 (MPEG2 audio) support including decoding + bitstream delay * added TS/M2TS runtime detection * improved VOB/EVO runtime detection * added TrueHD gap/overlap detection * audio gap/overlap detection logic rewritten (not complete yet) * fixed: log file option didn't work correctly * fixed: some DTS tracks in PAL TS broadcasts weren't detected correctly * fixed: some E-AC3 tracks in PAL TS broadcasts weren't detected correctly v2.40 * video framecount is now also shown for TS/M2TS demuxing/remuxing * "-check" option added to check container for corruption * TS/M2TS: discontinuity check sometimes fired false alarms * HD DVD subtitle language/description was not always correct * title listing is only shown if there are at least 2 titles * if there is only one title, the title is automatically selected * TS/M2TS audio delay detection was broken * improved audio delay detection for broadcasts and badly mastered discs * TS/M2TS video demuxing could eventually add some invalid data * new option "log=c:\whatever\log.txt" specifies the log file path/name v2.39 * simple audio transcoding was broken v2.38 * fixed file path handling bug v2.37 * added HD DVD chapter support * added HD DVD subtitle demuxing support * added pre-freeze detection for Haali Matroska Muxer bug * invalid characters are removed from file names now * log file is copied to destination path (of first destination file) v2.36 * TS/M2TS: discontinuity is only checked for tracks which are de- or remuxed * TS/M2TS: "-demux" creates both a "thd" and an "ac3" file for "thd/ac3" tracks * TS/M2TS: "eac3to source.m2ts movie.mkv" transcodes "thd/ac3" tracks to FLAC * M2TS: track language is displayed (if the file "xxxxx.clpi" is available) * TS: track language is displayed (if the source file contains this info) * video gaps/overlaps in the last 5 seconds of the movie are ignored now v2.35 * fixed broken EVO support v2.34 * TS/M2TS: fixed PAT/PMT reading bug * TS/M2TS: new "-ignoreDiscon" option makes eac3to ignore discontinuity errors v2.33 * added full TS and M2TS support (file joining not supported yet, though) * further improved "-demux" file names * help text and HD DVD track listing is now also written to the log v2.32 * added automatic "VPLST000.XPL" and "HVA00001.VTI" parsing * "eac3to" or "eac3to ." inside of a HD DVD folder lists all title sets * "eac3to someHdDvdMovieFolder" lists all title sets * "eac3to someHdDvdMovieFolder whatever.mkv" converts the longest title set * "eac3to someHdDvdMovieFolder x) whatever.mkv" converts the selected title set * EVO report now contains the EVO display name (if "VPLST000.XPL" is available) * added language to EVO audio track listing (if "VPLST000.XPL" is available) * added EVO audio track display names (if "VPLST000.XPL" is available) * sequence end codes are stripped from VC-1, MPEG2 and h264/AVC * put "-stripPulldown" option back in on request * option "-demux" now writes to "current directory" instead of source directory * option "-demux" now creates files with meaningful names * doing "eac3to src.evo dst.mkv" now creates audio files with meaningful names * doing "eac3to src.evo dst.mkv" writes the audio files to same path as the MKV * after successful (erroneous) processing "success.wav" (error.wav) is played v2.31 * DTSWAV input support added * fixed bitstream delaying of 96khz DTS tracks * improved DTS runtime calculation * fixed DTS audio gap/overlap correction for strange DTS formats * fixed E-AC3 audio gap/overlap correction for strange bitrates * fixed incorrect MKV "default duration" when using "-24p" or "-30p" * fixed incorrect MKV "default duration" when using "-slowdown" or "-speedup" * improved support for "open bitrate" DTS files * slightly improved automatic (E-)AC3 delaying exactness v2.30 * fixed wrong MPEG2 framerate (bug introduced in v2.29) v2.29 * added automatic audio gap/overlap correction for (E-)AC3, DTS(-HD) and LPCM * options "-slowdown" and "-speedup" can now also be used for video muxing * added support for muxing of EVO's secondary video track to MKV * added "-24p", "-30p" and "-60i" options to overwrite detected h264 framerate * fixed some MPEG2 muxing problems * temporarily disabled "-stripPulldown" because vc1conv 0.3 is better v2.28 * new "-seekToIFrames" switch makes Basic Instinct (h264) muxing work v2.27 * fixed h264/AVC muxing crash with some movies (due to too high RAM usage) * fixed missing frames at the end of the movie when doing h264/AVC muxing * fixed non-working "eac3to -test" v2.26 * Haali Splitter replaced with internal splitter for EVO h264/AVC tracks * external raw h264/AVC tracks can now be muxed directly to Matroska * timestamps for h264/AVC MKV videos don't need to be rewritten, anymore * gaps/overlaps in h264/AVC track of EVO files are detected now * h264 aspect ratio is detected and written into MKV now * Haali Media Splitter is not being used at all, anymore * mkvtoolnix is not being used at all, anymore * added detection for MPEG2 interlaced -> progressive mode change * workaround for eacGui bug v2.25 * fixed MPEG2 muxing for interlaced content v2.24 * Haali Splitter replaced with internal splitter for EVO MPEG2 tracks * external raw MPEG2 tracks can now be muxed directly to Matroska * timestamps for MPEG2 MKV videos don't need to be rewritten, anymore * gaps/overlaps in MPEG2 track of EVO files are detected now * VC-1 and MPEG2 aspect ratios are detected and written into MKV now * fixed bug with "-down2" option v2.23 * fixed bug which made some DTS tracks appear dirty although they weren't * fixed extremely big gap detection with Fantastic Four 2 * fixed non cleaned up gaps file bug v2.22 * gap/overlap logic changed completely (optional two pass muxing now) * "-ignoreGaps" parameter is gone v2.21 * latest libav MLP/TrueHD decoder fixes "lossless check failed" bug * latest libav MLP/TrueHD decoder supports & decodes 7.1 TrueHD tracks * Matroska muxing speed dramatically improved * eac3to now detects and handles E-AC3 7.1 tracks correctly * option "-core" extracts 5.1 core from E-AC3 7.1 tracks * added support for small DTS files (< 300kb) v2.20 * changed VC-1 muxing method to fix problems with several movies, e.g. - Unforgiven - Phantom of the Opera - Million Dollar Baby - Fantastic Four 2 * fps value is now also added to MKV header when muxing raw VC-1 stream * added new "-skip" option to skip corruption in the beginning of an EVO file * added extra handling which fixes some EVO authoring bugs v2.19 * fixed h264 bitstream parsing of framerate information format * fixed (again) muxing of some rare VC-1 titles like e.g. POTO USA v2.18 * fixed bug which stopped eac3to v2.15-17 from working on some PCs * fixed h264 bitstream parsing bug (Sum of all Fears) * fps value is added to MKV header now * relaxed VC-1 gap detection once more * TrueHD decoding to stdout fixed (always output as 24 bit now) v2.17 * fixed VC-1 pulldown removal * VC-1 pulldown removal must now be activated by the new option "-stripPulldown" * improved VC-1 gap/overlap detection * new option "-ignoreGaps" disables VC-1 gap/overlap detection * libav E-AC3 decoder background decoding removed again v2.16 * fixed "eac3to -test" crash * fixed "eac3to some.ddp some.wav" crash * made video gap/overlap detection a little more relaxed * WAV header is initialized to 4GB instead of 0GB (for stdout) * fixed incorrect "primary/secondary" text v2.15 * Haali Splitter replaced with internal splitter for EVO VC-1 tracks * external raw VC-1 tracks can now be muxed directly to Matroska * timestamps for VC-1 MKV videos don't need to be rewritten, anymore * some problematic VC-1 movies should mux fine to MKV now (e.g. POTO USA) * gaps/overlaps in VC-1 track of EVO files are detected and displayed now * pulldown can be removed from external raw VC-1 tracks now * pulldown is automatically removed when demuxing EVO VC-1 tracks now * updated to the latest revision of the libav E-AC3 decoder * some minor changes and bugfixes v2.14 * libav TrueHD decoder "end of stream" bug should be fixed now * fixed libav DTS decoder - subwoofer channels is properly decoded now, too * patched libav DTS decoder to output full 24 bit * updated to the latest revision of the libav E-AC3 decoder * when decoding E-AC3 with Nero, libav decoding is also executed at the same time v2.13 * added option to downmix multi channel audio to stereo * added support for VC-1 custom aspect ratios * added stdout output support v2.12 (thanks to Ron/drmpeg for all his help) * video resolution, framerate and mode (progressive/interlaced) are displayed * rewriting timestamps should now always write the correct framerate * after a full EVO/VOB processing the number of video frames is shown * EVO 16 bit and 24 bit LPCM demuxing supported now (need samples for 20 bit) * (E-)AC3 bitstream can be delayed now (similar to delaycut) * DTS bitstream can be delayed now (similar to delaycut) * DTS-HD High-Res and Master Audio bitstream can be delayed now * when demuxing bitstream audio tracks from EVO delay is automatically applied * some little bugs fixed v2.11 * libav E-AC3 decoding is without DRC now * libav AC3 decoding added (without DRC) * libav E-AC3 and AC3 decoding hacked to return full 24 bit * fixed: delay was not applied for lossless audio tracks * fixed crash when parsing PCM files without doing any conversion * TrueHD dialnorm was displayed incorrectly * changed 23.976 to 24/1.001 * fixed some more minor bugs v2.10 * fixed crash which occurred when doing "EVO/VOB -> Surcode DTS encoding" * "eac3to source.evo movie.mkv" syntax replaces "-auto" option * "eac3to 1.evo+2.evo movie.evo" syntax supported now for simple EVO/VOB joining v2.09 * EVO demuxing added with proper delays for all audio tracks * EVO file joining/rebuilding added * automated EVO video remuxing (Matroska) added * automated rewriting of Matroska timestamps to 24p via mkvtoolnix added * multiple operations on the source file can now be run at the same time * switch "-test" tests all external DirectShow filters and tools * latest ffmpeg/libav TrueHD and E-AC3 decoder patches included * latest libAften build included * libav TrueHD decoder is now the default decoder for TrueHD/MLP * support for libav DTS decoding added * fixed a whole lot of bugs (and might have added a few new ones) v2.08 * fixed: bitdepth reducer sometimes crashed when being fed a PCM file * fixed: FLAC encoder sometimes crashed when delay was applied * fixed: some TrueHD files were dithered/processed by Nero when they shouldn't * fixed: Surcode 1.0.29 encoding automation * fixed: source file was deleted when source and dest file names were identical * eac3to output is now always written to "log.txt" * when a crash occurs, "log.txt" is added to the bug report * improved help text + hints slightly * undocumented switch "-check16bit" added * undocumented switch "-mono" added v2.07 * fixed libAV MLP decoding support * added automatic MLP ID20 channel remapping * Surcode 1.0.29 (or newer) home directory detection added v2.06 * doing FLAC -> FLAC now copies metadata from source to destination file * MLP files are correctly decoded now (by both Nero and libav/ffmpeg) * runtime for padded DTS files is shown correctly now v2.05 * added support for libav/ffmpeg decoding of TrueHD/MLP and E-AC3 * added "-libav" switch to force libav decoding v2.04 * don't need dtsac3source.ax, anymore * don't need Nero Splitter, anymore * don't need Sonic HD Demuxer, anymore * replaced hacked DirectShow feeding with a cleaner approach * added support for DTS-HD Master Audio 7.1 tracks (only 5.1 decoding) * little performance boost for PAL speedup/down on DualCore CPUs * fixed some bugs v2.03 * new "-debug" switch added v2.02 * fixed: automatic registering of the dtsac3source filter crashed v2.01 * fixed: AC3 encoding sometimes crashed when being fed 24 bit audio data * fixed: AC3 encoded files were invalid when being fed 24 bit audio data * eac3toGUI didn't work with eac3to v2.0 * "eac3to source.ac3 dest.ac3 -slowdown" didn't do anything useful * when a crash occurs, the bug report is automatically copied to clipboard now * some minor cosmetic improvements v2.00 totally new features * AC3 decoding support (Nero's decoder without DRC/dialnorm) * resampling to 44.1/48/96 kHz (by using "r8brain") * apply/reverse PAL speedup (by using "r8brain") * "eac3to sourceFile" will print out source file details strongly enhanced features * dramatically improved performance (no intermediate files, anymore!) * proper 6.1/7.1 downmixing to 5.1 instead of just dropping the back surround channels * RAW/PCM file detection now auto detects channels, bitdepth and endian * WAV is now fully supported as source file format * destination file extension "PCM" creates Blu-Ray style LPCM tracks * bitdepth can be reduced to anything between 14 bits and 23 bits DTS related improvements/changes * DTS-96/24 support added * "open bitrate" support added * strange channel configuration support added * removal of zero padding from DTS files added * eac3to can fix broken DTS-ES files (they decode to 5.1 instead of 6.1 without the fix) * dialog normalization can be removed without removing the additional DTS-HD data now * core extraction must be specifically asked for now (see "-core" switch) AC3 related improvements * did I mention that eac3to can decode AC3 now? * strange channel configuration support added TrueHD related improvements * delay problem (hopefully) solved * fixed: sometimes some audio data in the middle of a track was lost * TrueHD/AC3 interweaved file can be stripped to TrueHD only now various minor improvements/changes * progress bar added * eac3to detects file format independently of file extension * multiple input files can be treated as one big file * "sox" is not needed, anymore * "dump" filter not needed, anymore * "aften.exe" replaced by "libAften.dll" * "flac.exe" replaced by "libFlac.dll" * DTS/DD+/AC3 source filter ships with eac3to now * 8bit support added * crash analyzer and bug reporting added v1.23 * bugfix: sometimes TrueHD decoding resulted in incorrect sampling rate v1.22 * 6.1 -> 7.1 channel doubling was sometimes incorrectly skipped * OS speaker settings now don't have to be 7.1, anymore * added detection of 5.1 output when 6.1 was expected * DTS and DTS-ES files are now forcefully patched to 24 bit by eac3to (workaround for Sonic decoder) * Sonic Audio Decoder is now always used by default for DTS decoding v1.21 * bugfix: 2 channel DTS files were not accepted * added: DTS-ES 6.1 support * added: DTS-HD High Resolution Matrix 5.1 support * added: DTS-HD Master Audio 6.1 support v1.20 * bugfix: some Blu-Ray TrueHD tracks were not accepted * change: eac3to output text slightly improved v1.19 * bugfix: still some TrueHD files were not accepted ("The source file format is unknown") * added: FLAC supported as source/input file format now * added: full delay functionality v1.18 * bugfix: some TrueHD files were not accepted ("The source file format is unknown") * change: EVO files are not accepted as source files, anymore * added: detection and repacking of 16 bit TrueHD tracks * added: proper detection of "DTS-HD Master Audio" and "DTS-HD High Resolution" tracks * added: runtime information for "DTS-HD High Resolution" tracks * bugfix: bitrate information for "DTS-HD High Resolution" tracks * added: decoding of "DTS-HD Master Audio" tracks (Sonic) * added: decoding of "DTS-HD High Resolution" tracks (Sonic) * added: decoding of conventional DTS tracks (Sonic/Nero) v1.17 * TrueHD dialog normalization removal added v1.16 * added decoding support for Blu-Ray TrueHD files v1.15 * bugfixes v1.14 * DTS dialog normalization can be removed now * DTS core can be extracted from DTS-HD track now v1.13 * "eac3to src.ac3 dst.ac3" removes dialog normalization from AC3 files * "eac3to src.eac3 dst.eac3" removes dialog normalization from E-AC3 files * "eac3to src.thd dst.ac3" extracts the AC3 frames from a Blu-Ray TrueHD track and removes dialog normalization v1.12 * tools "flac.exe", "aften.exe" and "sox.exe" are now distributed in the eac3to zip * correct channel mapping for 7.1 LPCM tracks is default now * new option "-down6" allows downconverting of 7.1 tracks to 5.1 * modded "flac.exe" ships with eac3to now, which has no problems with 2GB file output, anymore v1.11 * bugfix: (L)PCM -> DTS encoding automation failed when source and destination folders differed * added: new "-allowDnr" switch allows Nero's audio decoder to apply DNR * added: new "-keepDialnorm" switch disables removal of E-AC3 dialnorm information v1.10 * E-AC3 dialog normalization detection and removal * DRC turned off for Nero E-AC3 decoder * Surcode automation improved * Nero is now the default E-AC3 and TrueHD decoder * the flag "/nero" is no more * there is a flag "/sonic" now to force the use of the Sonic filters v1.09 * multi channel mono wav output added * automated SurCode DTS encoding added * 24bit PCM handling works now (was buggy before) * "-blu-ray" option removed * with PCM input files "bigendian" is default now * with 5.1 PCM input blu-ray style channel remapping is default now * switches "-16" and "-24" are valid for both TrueHD and PCM input now * eac3to now creates the WAV files on its own instead of using sox * target extension ".wavs" results in one mono wav for each channel being created * SurCode DVD DTS encoding automation added * new options "-768" and "-1536" for DTS encoding * TrueHD output is not downconverted to 16bit by default, anymore * new option "-down16" downconverts the raw data from 24 -> 16 bit (not limited to TrueHD input) v1.08 * added PCM input support * automatic detection of PCM bitdepth added (16bit or 24bit) * "-blu-ray" switch remaps PCM channels correctly v1.07 * added "-8" switch for 8 channel support v1.06 * mono E-AC3 support added v1.05 * support for 5.1 TrueHD audio tracks added v1.04 * E-AC3 files bigger than 4GB are supported now v1.03 * AC3 files bigger than 2GB are supported now v1.02 * FLAC encoding works now without any input/output size limits v1.01 * support for FLAC encoding added * bitrate can be specified via command line parameter * ffdshow removed from the filter chain * "ddp" and "ec3" file extensions are accepted now, too * fix: "dd+" file extension didn't work correctly. v1.00 * initial release * can convert a 2.0 or 5.1 channel E-AC3 file to AC3.
Windows系统错误代码（Java描述）
public class WindowsError { public static final int ERROR_SUCCESS = 0x0; public static final int ERROR_INVALID_FUNCTION = 0x1; public static final int ERROR_FILE_NOT_FOUND = 0x2; public static fin
How do I interpret scsi status messages in RHEL like "sd 2:0:0:243: SCSI error: return code = 0x0800
Issue What does "return code = 0xNNNNNNNN" mean, for example 0x08000002 within the following: Raw Oct 23 14:56:25 uname kernel: sdas: Current: sense key: Aborted Command Oct 23 14:56:25 uname ke...
SharePoint

3,242

社区成员

4,604

社区内容

发帖
与我相关
我的任务
社区描述
企业开发 SharePoint
社区管理员
  • SharePoint社区
  • 霖雨
加入社区
  • 近7日
  • 近30日
  • 至今

加载中

查看更多榜单
社区公告
暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章