关于 linux下 jlink与openocd的问题
Open On-Chip Debugger 0.4.0 (2011-01-08-04:20)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Command handler execution failed
Error: JTAG interface has to be specified, see "interface" command
Command handler execution failed
每次执行openocd后都会提示 JTAG interface has to be specified, see "interface" command
安装的libusb0.1.12
openocd.cfg 文件如下
# GDB can also flash my flash!
#gdb_memory_map enable
gdb_memory_map enable #我的insight不支持
#gdb_flash_program enable
gdb_breakpoint_override hard
#gdb_detach reset
#jtag_rclk 3000
jtag_speed 3000
#delays on reset lines
jtag_nsrst_delay 200
jtag_ntrst_delay 200
#use combined on interfaces or targets that can't set TRST/SRST separately
#reset_config trst_and_srst srst_pulls_trst
reset_config trst_and_srst
#hard reset the system to a reliable state
#jtag_reset srst
#sleep 500
source [find interface/jlink.cfg]
source [find target/at91sam7sx.cfg]
source [find board/mini2440.cfg]
开发板是mini2440 jlink是v8
请问问题出在哪儿阿 折腾一晚上了 求职求助阿