如何让android普通程序获得访问/dev/bus/usb/的权限

mecca_lq 2011-06-13 04:01:43
我通过cygwin+eclipse开发ndk程序, 目标是要和一个插在android上的HID设备通信，程序已经能编译通过，但是运行到android设备上后就报错，分析error 是我的程序没有打开/dev/bus/usb/下的设备文件的权限。

请问如何能让自己的普通程序获得读写/dev/bus/usb/下文件的权限?
或者是否有类似像打开蓝牙权限那样在manifest.xml的设置？

此地真有高手么？
...全文
1533 9 打赏 收藏 转发到动态 举报
写回复
用AI写文章
9 条回复
切换为时间正序
请发表友善的回复…
发表回复
bjskyhorse 2012-03-19
  • 打赏
  • 举报
 回复
LZ,我想问一下，能否讲一下android设备如何和HID设备通信。而且我有个疑问，如果需要su权限才能支持你的应用，难道将来用使用你的应用程序的用户都得把设备root？跟随你的软件发布还要附上一个各个手机如何root的手册?
sinojp 2012-01-03
  • 打赏
  • 举报
 回复
RE能临时帮你打开
gotime_wxb 2011-11-02
  • 打赏
  • 举报
 回复
lz,你的问题解决没？
wenzheng38 2011-10-23
  • 打赏
  • 举报
 回复
[Quote=引用 4 楼 lizhengjun2010 的回复:]
改这个文件/dev/bus/usb/权限

在Android设备上的程序要修改文件权限 必须root

可以试着在pc上adb shell chmod 改权限 试试
[/Quote]

++
corewise 2011-10-21
  • 打赏
  • 举报
 回复
android改权限？也许有的设备能用root
lizhengjun2010 2011-10-21
  • 打赏
  • 举报
 回复
改这个文件/dev/bus/usb/权限

在Android设备上的程序要修改文件权限 必须root

可以试着在pc上adb shell chmod 改权限 试试

corewise 2011-10-21
  • 打赏
  • 举报
 回复
manifest.xml加android.permission.HARDWARE_TEST
corewise 2011-10-21
  • 打赏
  • 举报
 回复
这个问题又解决了么？
wuyu637 2011-06-13
  • 打赏
  • 举报
 回复
http://tianmeng126.blog.163.com/blog/static/10800956820115981114488/
pcf8563_i2c1_r8_ruoge_ov2640通过给RTC驱动增加设备节点读取秒钟成功+直接读取I2C1获取秒钟值20160626_2201.7z
pcf8563_i2c1_r8_ruoge_ov2640通过给RTC驱动增加设备节点读取秒钟成功+直接读取I2C1获取秒钟值20160626_2201.7z http://blog.csdn.net/21cnbao/article/details/7919055 在Android源码树中添加userspace I2C读写工具（i2c-util） 本文使用的开发板是：杭州若格科技有限公司的全志R8。CPU：CPUARM Cortex-A8 更多芯片资料请参见全志官网： http://www.allwinnertech.com/clq/r/R8.html 通过/dev/i2c-n节点，用户可以在userspace直接访问板上的i2c外设寄存器，主要是透过I2C_RDWR这个IO控制命令将i2c_msg数组传递给kernel去执行。 开发板的/dev/i2c-1总线下挂有一片I2C的RTC：pcf8563。 root@android:/dev # cd /sys/class/i2c-adapter/ root@android:/sys/class/i2c-adapter # ll lrwxrwxrwx root root 1970-01-02 08:31 i2c-0 -> ../../devices/platform/sun5i-i2c.0/i2c-0 lrwxrwxrwx root root 1970-01-02 08:31 i2c-1 -> ../../devices/platform/sun5i-i2c.1/i2c-1 lrwxrwxrwx root root 1970-01-02 08:31 i2c-2 -> ../../devices/platform/sun5i-i2c.2/i2c-2 root@android:/sys/class/i2c-adapter # cd i2c-1 root@android:/sys/class/i2c-adapter/i2c-1 # ll drwxr-xr-x root root 1970-01-02 08:31 1-0051 --w------- root root 4096 1970-01-02 08:31 delete_device lrwxrwxrwx root root 1970-01-02 08:31 device -> ../../sun5i-i2c.1 drwxr-xr-x root root 1970-01-01 08:00 i2c-dev -r--r--r-- root root 4096 1970-01-02 08:31 name --w------- root root 4096 1970-01-02 08:31 new_device drwxr-xr-x root root 1970-01-01 08:00 power lrwxrwxrwx root root 1970-01-02 08:31 subsystem -> ../../../../bus/i2c -rw-r--r-- root root 4096 1970-01-01 08:00 uevent root@android:/sys/class/i2c-adapter/i2c-1 # root@android:/sys/class/i2c-adapter/i2c-1 # cd 1-0051/ root@android:/sys/class/i2c-adapter/i2c-1/1-0051 # ll lrwxrwxrwx root root 1970-01-02 10:18 driver -> ../../../../../bus/i2c/drivers/pcf8563 -r--r--r-- root root 4096 1970-01-02 10:18 modalias -r--r--r-- root root 4096 1970-01-02 10:18 name drwxr-xr-x root root 1970-01-02 10:18 power drwxr-xr-x root root 1970-01-02 10:18 rtc lrwxrwxrwx root root 1970-01-02 10:18 subsystem -> ../../../../../bus/i2c -rw-r--r-- root root 4096 1970-01-02 10:18 uevent root@android:/sys/class/i2c-adapter/i2c-1/1-0051 # cat name pcf8563 root@android:/sys/class/i2c-adapter/i2c-1/1-0051 # 注释：1-0051 1 表示 i2c-1这条I2C1总线上挂载的设备，如果是I2C2总线上挂载的设备，路径就是2-00XX了。 0051 一般的I2C设备的从机地址都是一个字节的，因为前两位为0x00（16进制的），后两位为pcf8563移位自后的I2C从机地址0x51（也是16进制的） 压缩包中的PCF8563-CN.pdf，datasheet告诉我们：I2C总线从地址：读，0A3H；写，0A2H。右移一位之后正好是0x51。 下面的代码可以完成这个功能： #include #include #include #include #include #include #include #include #include #include #include /* This is the structure as used in the I2C_RDWR ioctl call */ struct i2c_rdwr_ioctl_data { struct i2c_msg __user *msgs; /* pointers to i2c_msgs */ __u32 nmsgs; /* number of i2c_msgs */ }; int i2c_read_reg(char *dev, unsigned char *buf, unsigned slave_address, unsigned reg_address, int len) { struct i2c_rdwr_ioctl_data work_queue; unsigned char w_val = reg_address; int ret; int fd = open(dev, O_RDWR); if (!fd) { printf("Error on opening the device file\n"); return 0; } work_queue.nmsgs = 2; work_queue.msgs = (struct i2c_msg*)malloc(work_queue.nmsgs *sizeof(struct i2c_msg)); if (!work_queue.msgs) { printf("Memory alloc error\n"); close(fd); return 0; } ioctl(fd, I2C_TIMEOUT, 2); ioctl(fd, I2C_RETRIES, 1); (work_queue.msgs[0]).len = 1; (work_queue.msgs[0]).addr = slave_address; (work_queue.msgs[0]).buf = &w_val; (work_queue.msgs[1]).len = len; (work_queue.msgs[1]).flags = I2C_M_RD; (work_queue.msgs[1]).addr = slave_address; (work_queue.msgs[1]).buf = buf; ret = ioctl(fd, I2C_RDWR, (unsigned long) &work_queue); if (ret < 0) { printf("Error during I2C_RDWR ioctl with error code: %d\n", ret); close(fd); free(work_queue.msgs); return 0; } else { printf("read salve:x reg:x\n", slave_address, reg_address); close(fd); free(work_queue.msgs); return len; } } int i2c_write_reg(char *dev, unsigned char *buf, unsigned slave_address, unsigned reg_address, int len) { struct i2c_rdwr_ioctl_data work_queue; unsigned char w_val = reg_address; unsigned char w_buf[len+1]; int ret; w_buf[0] = reg_address; int fd = open(dev, O_RDWR); if (!fd) { printf("Error on opening the device file\n"); return 0; } work_queue.nmsgs = 1; work_queue.msgs = (struct i2c_msg*)malloc(work_queue.nmsgs *sizeof(struct i2c_msg)); if (!work_queue.msgs) { printf("Memory alloc error\n"); close(fd); return 0; } ioctl(fd, I2C_TIMEOUT, 2); ioctl(fd, I2C_RETRIES, 1); (work_queue.msgs[0]).len = 1 + len; (work_queue.msgs[0]).addr = slave_address; (work_queue.msgs[0]).buf = w_buf; memcpy(w_buf + 1, buf, len); ret = ioctl(fd, I2C_RDWR, (unsigned long) &work_queue); if (ret < 0) { printf("Error during I2C_RDWR ioctl with error code: %d\n", ret); close(fd); free(work_queue.msgs); return 0; } else { printf("write salve:x reg:x\n", slave_address, reg_address); close(fd); free(work_queue.msgs); return len; } } int main(int argc, char **argv) { unsigned int fd; unsigned int slave_address, reg_address; unsigned r_w; unsigned w_val; unsigned char rw_val; if (argc < 5) { printf("Usage:\n%s /dev/i2c-x start_addr reg_addr rw[0|1] [write_val]\n", argv[0]); return 0; } fd = open(argv[1], O_RDWR); if (!fd) { printf("Error on opening the device file %s\n", argv[1]); return 0; } sscanf(argv[2], "%x", &slave_address); sscanf(argv[3], "%x", ®_address); sscanf(argv[4], "%d", &r_w); if (r_w == 0) { i2c_read_reg(argv[1], &rw_val, slave_address, reg_address, 1); printf("Read %s-%x reg %x, read value:%x\n", argv[1], slave_address, reg_address, rw_val); } else { if (argc < 6) { printf("Usage:\n%s /dev/i2c-x start_addr reg_addr r|w[0|1] [write_val]\n", argv[0]); return 0; } sscanf(argv[5], "%d", &w_val); if ((w_val & ~0xff) != 0) printf("Error on written value %s\n", argv[5]); rw_val = (unsigned char)w_val; i2c_write_reg(argv[1], &rw_val, slave_address, reg_address, 1); } return 0; } 在android/external/新建i2c-util目录，上述源代码存入android/external/i2c-util/i2c-util.c， R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\i2c-util\i2c-util.c 编写对应的Android.mk: LOCAL_PATH := $(call my-dir) include $(CLEAR_VARS) LOCAL_MODULE_TAGS := optional LOCAL_MODULE = i2c-util # LOCAL_SRC_FILES := $(call all-subdir-c-files) LOCAL_SRC_FILES := i2c-util.c include $(BUILD_EXECUTABLE) 编译Android后，上述工具会位于/system/bin目录。在电路板上使用它： R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\out\target\product\nuclear-evb\system\bin\i2c-util 如果android已经编译了，只需要执行： rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ source build/envsetup.sh rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ lunch 选择：18. nuclear_evb-eng （注意：不同的ubuntu电脑，序号可能不同，但是只需要选择nuclear_evb-eng编译选项前面的序号既可！！！！） rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ cd i2c-util/ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android/i2c-util$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android/i2c-util$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android/i2c-util$ mm 详细的编译步骤： Connecting to 192.168.1.103:22... Connection established. To escape to local shell, press 'Ctrl+Alt+]'. Welcome to Ubuntu 14.04 LTS (GNU/Linux 3.13.0-24-generic x86_64) * Documentation: https://help.ubuntu.com/ Last login: Sun Jun 26 19:23:30 2016 from 192.168.1.101 rootroot@rootroot-E400:~$ cd wyb/pcf8563_i2c1_r8_ruoge_ov2640/ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640$ ll total 8606460 drwxr-xr-x 4 rootroot rootroot 4096 Jun 26 20:46 ./ drwxr-xr-x 19 rootroot rootroot 4096 Jun 25 06:50 ../ drwxrwxr-x 29 rootroot rootroot 4096 Jun 26 19:51 android/ drwxrwxr-x 8 rootroot rootroot 4096 Jun 26 16:35 lichee/ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640$ cd android/ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ source build/envsetup.sh including device/asus/grouper/vendorsetup.sh including device/asus/tilapia/vendorsetup.sh including device/generic/armv7-a-neon/vendorsetup.sh including device/generic/armv7-a/vendorsetup.sh including device/generic/mips/vendorsetup.sh including device/generic/x86/vendorsetup.sh including device/samsung/maguro/vendorsetup.sh including device/samsung/manta/vendorsetup.sh including device/samsung/toroplus/vendorsetup.sh including device/samsung/toro/vendorsetup.sh including device/softwinner/common/vendorsetup.sh including device/softwinner/crane-evb/vendorsetup.sh including device/softwinner/nuclear-256m/vendorsetup.sh including device/softwinner/nuclear-evb/vendorsetup.sh including device/softwinner/nuclear-r8m-evb/vendorsetup.sh including device/ti/panda/vendorsetup.sh including sdk/bash_completion/adb.bash rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ lunch You're building on Linux Lunch menu... pick a combo: 1. full-eng 2. full_x86-eng 3. vbox_x86-eng 4. full_mips-eng 5. full_grouper-userdebug 6. full_tilapia-userdebug 7. mini_armv7a_neon-userdebug 8. mini_armv7a-userdebug 9. mini_mips-userdebug 10. mini_x86-userdebug 11. full_maguro-userdebug 12. full_manta-userdebug 13. full_toroplus-userdebug 14. full_toro-userdebug 15. crane_evb-eng 16. nuclear_256m-user 17. nuclear_256m-eng 18. nuclear_evb-eng 19. nuclear_r8m_evb-eng 20. full_panda-userdebug Which would you like? [full-eng] 18 ============================================ PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=nuclear_evb TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a-neon HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.13.0-24-generic-x86_64-with-Ubuntu-14.04-trusty HOST_BUILD_TYPE=release BUILD_ID=JDQ39 OUT_DIR=out ============================================ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ ll total 156 drwxrwxr-x 29 rootroot rootroot 4096 Jun 26 19:51 ./ drwxr-xr-x 4 rootroot rootroot 4096 Jun 26 20:46 ../ drwxrwxr-x 3 rootroot rootroot 4096 Jun 13 11:38 abi/ drwxrwxr-x 10 rootroot rootroot 4096 Jun 13 11:38 bionic/ drwxrwxr-x 5 rootroot rootroot 4096 Jun 13 11:38 bootable/ drwxrwxr-x 7 rootroot rootroot 4096 Jun 13 11:38 build/ drwxrwxr-x 11 rootroot rootroot 4096 Jun 13 11:38 cts/ drwxrwxr-x 18 rootroot rootroot 4096 Jun 13 11:38 dalvik/ drwxrwxr-x 18 rootroot rootroot 4096 Jun 13 11:38 development/ drwxrwxr-x 10 rootroot rootroot 4096 Jun 13 11:38 device/ drwxrwxr-x 3 rootroot rootroot 4096 Jun 13 11:38 docs/ drwxrwxr-x 159 rootroot rootroot 4096 Jun 13 11:39 external/ drwxrwxr-x 14 rootroot rootroot 4096 Jun 13 11:40 frameworks/ drwxrwxr-x 10 rootroot rootroot 4096 Jun 13 11:40 gdk/ drwxrwxr-x 10 rootroot rootroot 4096 Jun 13 11:40 hardware/ drwxr-xr-x 2 rootroot rootroot 4096 Jun 26 19:37 i2cscan/ drwxr-xr-x 2 rootroot rootroot 4096 Jun 26 19:52 i2c-util/ drwxrwxr-x 11 rootroot rootroot 4096 Jun 13 11:40 libcore/ drwxrwxr-x 4 rootroot rootroot 4096 Jun 13 11:40 libnativehelper/ -r--r--r-- 1 rootroot rootroot 87 Jun 13 11:38 Makefile drwxrwxr-x 8 rootroot rootroot 4096 Jun 13 11:40 ndk/ drwxrwxr-x 4 rootroot rootroot 4096 Jun 26 16:43 out/ drwxrwxr-x 8 rootroot rootroot 4096 Jun 13 11:40 packages/ drwxrwxr-x 5 rootroot rootroot 4096 Jun 13 11:40 pdk/ drwxrwxr-x 10 rootroot rootroot 4096 Jun 13 11:41 prebuilts/ drwxr-xr-x 2 rootroot rootroot 4096 Jun 25 13:01 read_pcf8563/ drwxrwxr-x 6 rootroot rootroot 4096 Jun 13 11:38 .repo/ drwxrwxr-x 51 rootroot rootroot 4096 Jun 13 11:41 sdk/ drwxrwxr-x 9 rootroot rootroot 4096 Jun 13 11:41 system/ drwxrwxr-x 4 rootroot rootroot 4096 Jun 13 11:41 tools/ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android$ cd i2c-util/ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android/i2c-util$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android/i2c-util$ rootroot@rootroot-E400:~/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android/i2c-util$ mm ============================================ PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.2.2 TARGET_PRODUCT=nuclear_evb TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a-neon HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.13.0-24-generic-x86_64-with-Ubuntu-14.04-trusty HOST_BUILD_TYPE=release BUILD_ID=JDQ39 OUT_DIR=out ============================================ PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/Effect_Tick.ogg:system/media/audio/ui/Effect_Tick.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/KeypressStandard.ogg:system/media/audio/ui/KeypressStandard.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/KeypressSpacebar.ogg:system/media/audio/ui/KeypressSpacebar.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/KeypressDelete.ogg:system/media/audio/ui/KeypressDelete.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/KeypressReturn.ogg:system/media/audio/ui/KeypressReturn.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/VideoRecord.ogg:system/media/audio/ui/VideoRecord.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/camera_click.ogg:system/media/audio/ui/camera_click.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/LowBattery.ogg:system/media/audio/ui/LowBattery.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/Dock.ogg:system/media/audio/ui/Dock.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/Undock.ogg:system/media/audio/ui/Undock.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/Lock.ogg:system/media/audio/ui/Lock.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/Unlock.ogg:system/media/audio/ui/Unlock.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Sceptrum.ogg:system/media/audio/ringtones/Sceptrum.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/KeypressStandard_120.ogg:system/media/audio/ui/KeypressStandard.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/KeypressSpacebar_120.ogg:system/media/audio/ui/KeypressSpacebar.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/KeypressDelete_120.ogg:system/media/audio/ui/KeypressDelete.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/effects/ogg/KeypressReturn_120.ogg:system/media/audio/ui/KeypressReturn.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/notifications/ogg/Capella.ogg:system/media/audio/notifications/Capella.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/notifications/ogg/CetiAlpha.ogg:system/media/audio/notifications/CetiAlpha.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/notifications/ogg/Polaris.ogg:system/media/audio/notifications/Polaris.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/notifications/ogg/Pollux.ogg:system/media/audio/notifications/Pollux.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/notifications/ogg/Procyon.ogg:system/media/audio/notifications/Procyon.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Aquila.ogg:system/media/audio/ringtones/Aquila.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/ArgoNavis.ogg:system/media/audio/ringtones/ArgoNavis.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Carina.ogg:system/media/audio/ringtones/Carina.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Centaurus.ogg:system/media/audio/ringtones/Centaurus.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Cygnus.ogg:system/media/audio/ringtones/Cygnus.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Draco.ogg:system/media/audio/ringtones/Draco.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Machina.ogg:system/media/audio/ringtones/Machina.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Orion.ogg:system/media/audio/ringtones/Orion.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Pegasus.ogg:system/media/audio/ringtones/Pegasus.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Pyxis.ogg:system/media/audio/ringtones/Pyxis.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Rigel.ogg:system/media/audio/ringtones/Rigel.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Scarabaeus.ogg:system/media/audio/ringtones/Scarabaeus.ogg ignored. PRODUCT_COPY_FILES frameworks/base/data/sounds/ringtones/ogg/Solarium.ogg:system/media/audio/ringtones/Solarium.ogg ignored. PRODUCT_COPY_FILES device/softwinner/nuclear-common/googleservice/gapps-jb-20121130-signed/system/tts/lang_pico/es-ES_zl0_sg.bin:system/tts/lang_pico/es-ES_zl0_sg.bin ignored. PRODUCT_COPY_FILES device/softwinner/nuclear-common/googleservice/gapps-jb-20121130-signed/system/tts/lang_pico/es-ES_ta.bin:system/tts/lang_pico/es-ES_ta.bin ignored. PRODUCT_COPY_FILES device/softwinner/nuclear-common/googleservice/gapps-jb-20121130-signed/system/tts/lang_pico/fr-FR_nk0_sg.bin:system/tts/lang_pico/fr-FR_nk0_sg.bin ignored. PRODUCT_COPY_FILES device/softwinner/nuclear-common/googleservice/gapps-jb-20121130-signed/system/tts/lang_pico/fr-FR_ta.bin:system/tts/lang_pico/fr-FR_ta.bin ignored. PRODUCT_COPY_FILES device/softwinner/nuclear-common/googleservice/gapps-jb-20121130-signed/system/tts/lang_pico/de-DE_gl0_sg.bin:system/tts/lang_pico/de-DE_gl0_sg.bin ignored. PRODUCT_COPY_FILES device/softwinner/nuclear-common/googleservice/gapps-jb-20121130-signed/system/tts/lang_pico/it-IT_cm0_sg.bin:system/tts/lang_pico/it-IT_cm0_sg.bin ignored. PRODUCT_COPY_FILES device/softwinner/nuclear-common/googleservice/gapps-jb-20121130-signed/system/tts/lang_pico/it-IT_ta.bin:system/tts/lang_pico/it-IT_ta.bin ignored. PRODUCT_COPY_FILES device/softwinner/nuclear-common/googleservice/gapps-jb-20121130-signed/system/tts/lang_pico/de-DE_ta.bin:system/tts/lang_pico/de-DE_ta.bin ignored. No private recovery resources for TARGET_DEVICE nuclear-evb make: Entering directory `/home/rootroot/wyb/pcf8563_i2c1_r8_ruoge_ov2640/android' target thumb C: i2c-util cd R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\out\target\product\nuclear-evb\system\bin C:\Users\Administrator.USER-20150913SZ>r: R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\out\target\product\nuclear-evb\system\bin>adb remount remount succeeded R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\out\target\product\nuclear-evb\system\bin> R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\out\target\product\nuclear-evb\system\bin>dir i2c* 驱动器 R 中的卷是 rootroot 卷的序列号是 1A1C-E71D R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\out\target\product\nuclear-evb\system\bin 的目录 2016/06/26 21:10 5,388 i2c-util 1 个文件 5,388 字节 0 个目录 268,337,782,784 可用字节 R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\out\target\product\nuclear-evb\system\bin> R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\out\target\product\nuclear-evb\system\bin>adb push i2c-util /data/ 29 KB/s (5388 bytes in 0.180s) R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\android\out\target\product\nuclear-evb\system\bin> 将R8的串口连接到windows电脑上。通过串口工具：比如Xshell5（有些人可能喜欢使用SecureCRT）读取R8的串口打印 （ubuntu下请使用minicom，使用方法请自行搜索了） 波特率选择：115200 N 8 1 等R8的android启动完成之后（LCD进android主界面），输入：su [ 37.990060] init: process 'ril-daemon', pid 950 exited [ 38.010049] init: process 'ril-daemon' killing any children in process group su root@android:/ # root@android:/ # root@android:/ # cd /data root@android:/data # root@android:/data # ll drwxrwxr-x system system 1970-01-11 08:58 anr drwxrwx--x system system 1970-01-02 08:01 app drwx------ root root 1980-10-01 11:03 app-asec drwxrwx--x system system 1970-01-02 08:01 app-lib drwxrwx--x system system 1980-10-01 11:03 app-private drwx------ system system 1980-10-01 11:04 backup drwxrwx--x system system 1970-01-02 08:00 dalvik-cache drwxrwx--x system system 2016-06-21 10:11 data drwxr-x--- root log 1980-10-01 11:03 dontpanic drwxrwx--- drm drm 1980-10-01 11:04 drm -rw-rw-rw- root root 5388 2016-06-26 21:10 i2c-util drwxr-x--x root root 1980-10-01 11:03 local drwxrwx--- root root 1970-01-01 08:00 lost+found drwxrwx--- media_rw media_rw 1980-10-01 11:03 media drwxrwx--t system misc 1980-10-01 11:03 misc -rw------- system system 154 1970-01-02 08:02 pointercal drwx------ root root 1970-01-02 08:00 property -rwxrwxrwx root root 5392 2016-06-25 13:01 read_pcf8563 drwxrwx--x system system 1980-10-01 11:03 resource-cache drwxr-x--- root shell 1980-10-01 11:03 ssh drwxrwxr-x system system 1970-01-02 08:00 system drwx------ system system 1970-01-02 08:03 tombstones drwx--x--x system system 1980-10-01 11:03 user root@android:/data # （让i2c-util具有可执行权限：） root@android:/data # chmod 777 i2c-util root@android:/data # root@android:/data # ll i2c* -rwxrwxrwx root root 5388 2016-06-26 21:10 i2c-util root@android:/data # root@android:/data # root@android:/data # （可选执行） root@android:/data # sync root@android:/data # 注意：串口打印会打印很多log信息。上面的步骤中的状态信息已经被过滤了。 如果你的串口打印过量的log信息，属于正常现象！ 如果不想要这么多的状态信息，可以考虑使用adb shell。 不过windows命令行中的adb shell不能够按TAB键自动补充，ubuntu的可以。 也许我们可以把windows的命令行特别设计一下（给它修正一下），让它也可以通过按TAB键来自动补全！^_ 读取pcf8563的第2个寄存器（秒钟值）： 表 5：BCD 格式寄存器概况 标明“－”的位无效 地址 寄存器名称 Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 02h 秒 VL 00～59BCD 码格式数 root@android:/data # ./i2c-util /dev/i2c-1 0x51 0x02 0 read salve:51 reg:02 Read /dev/i2c-1-51 reg 2, read value:11 root@android:/data # ./i2c-util /dev/i2c-1 0x51 0x02 0 read salve:51 reg:02 Read /dev/i2c-1-51 reg 2, read value:12 root@android:/data # ./i2c-util /dev/i2c-1 0x51 0x02 0 read salve:51 reg:02 Read /dev/i2c-1-51 reg 2, read value:12 root@android:/data # ./i2c-util /dev/i2c-1 0x51 0x02 0 read salve:51 reg:02 Read /dev/i2c-1-51 reg 2, read value:13 root@android:/data # ./i2c-util /dev/i2c-1 0x51 0x02 0 read salve:51 reg:02 Read /dev/i2c-1-51 reg 2, read value:14 root@android:/data # ./i2c-util /dev/i2c-1 0x51 0x02 0 read salve:51 reg:02 Read /dev/i2c-1-51 reg 2, read value:14 root@android:/data # ./i2c-util /dev/i2c-1 0x51 0x02 0 read salve:51 reg:02 Read /dev/i2c-1-51 reg 2, read value:15 可以知道秒钟的值是变化的，基本上是一秒钟递增一次，I2C读取成功。 如果感兴趣的话，在执行读取命令的时候通过协议分析仪或者示波器来抓取I2C1的SCL/SDA的波形，来进行更加详尽的分析！^_ 方法二： 给出了一种复杂的解决办法（步骤从简，更多请参考开头的方法）： R:\wyb\pcf8563_i2c1_r8_ruoge_ov2640\lichee\linux-3.4\drivers\rtc\rtc-sun5i.c 给这个驱动文件增加设备节点：/dev/a20_r8_pcf8563 增加设备节点的方法请参考： http://blog.csdn.net/mirkerson/article/details/8844997 android驱动学习---led实验 然后在这个驱动文件的pcf8563_probe函数处截获它的client指针（struct i2c_client *client） client2 = client; 用户可以通过在userspace直接访问设备节点：/dev/a20_r8_pcf8563（open） 然后调用ioctl：ioctl(fd, 0x00000001, 0x02); 来获取第2个寄存器：秒钟的值了。 #include #include #include #include #include #include #include #include #include #include #include int fd; int main(int argc, char **argv) { fd = open("/dev/a20_r8_pcf8563", O_RDWR); ioctl(fd, 0x00000001, 0x02); close(fd); return 0; } 执行过程（直接从内核打印秒钟值了，也可以看到秒钟值大概也是一秒钟递增一次！）： root@android:/data # root@android:/data # ./read_pcf8563 [ 1397.060015] ****wyb drivers/rtc/rtc-sun5i.c:1169/r8_pcf8563_open()! open init.... [ 1397.071009] ****wyb drivers/rtc/rtc-sun5i.c:1130/r8_pcf8563_ioctl()! cmd=0x00000001 [ 1397.079076] ****wyb drivers/rtc/rtc-sun5i.c:1160/r8_pcf8563_ioctl()! cmd=0x00000001, value=0x00000046 [ 1397.088342] ****wyb drivers/rtc/rtc-sun5i.c:1177/r8_pcf8563_close()! close init root@android:/data # root@android:/data # ./read_pcf8563 [ 1398.409888] ****wyb drivers/rtc/rtc-sun5i.c:1169/r8_pcf8563_open()! open init.... [ 1398.411203] ****wyb drivers/rtc/rtc-sun5i.c:1130/r8_pcf8563_ioctl()! cmd=0x00000001 [ 1398.419273] ****wyb drivers/rtc/rtc-sun5i.c:1160/r8_pcf8563_ioctl()! cmd=0x00000001, value=0x00000047 [ 1398.428546] ****wyb drivers/rtc/rtc-sun5i.c:1177/r8_pcf8563_close()! close init root@android:/data # root@android:/data # root@android:/data # ./read_pcf8563 [ 1399.668173] ****wyb drivers/rtc/rtc-sun5i.c:1169/r8_pcf8563_open()! open init.... [ 1399.670939] ****wyb drivers/rtc/rtc-sun5i.c:1130/r8_pcf8563_ioctl()! cmd=0x00000001 [ 1399.679022] ****wyb drivers/rtc/rtc-sun5i.c:1160/r8_pcf8563_ioctl()! cmd=0x00000001, value=0x00000048 [ 1399.688299] ****wyb drivers/rtc/rtc-sun5i.c:1177/r8_pcf8563_close()! close init root@android:/data #
softap_ap6212a0_tinav2.1_验证通过_旧版本的系统_20170915_1223没有外层目录.7z
旧版本版本的全志R16平台的tinav2.1的系统打开softAP 2017/9/14 17:25 版本：V1.0 1、原始编译： rootroot@cm-System-Product-Name:~$ cd /home/wwt/ rootroot@cm-System-Product-Name:/home/wwt$ tar zxvf tinaV2.1_wyb_20170302_patch_leo_20161102.tar.gz rootroot@cm-System-Product-Name:/home/wwt$ mv tinaV2.1 softap_ap6212a0_tinav2.1 rootroot@cm-System-Product-Name:/home/wwt$ cd softap_ap6212a0_tinav2.1/ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ source build/envsetup.sh including target/allwinner/tulip-d1/vendorsetup.sh including target/allwinner/octopus-sch/vendorsetup.sh including target/allwinner/azalea-perf2/vendorsetup.sh including target/allwinner/azalea-perf3/vendorsetup.sh including target/allwinner/octopus-dev/vendorsetup.sh including target/allwinner/astar-evb/vendorsetup.sh including target/allwinner/generic/vendorsetup.sh including target/allwinner/azalea-perf1/vendorsetup.sh including target/allwinner/astar-parrot/vendorsetup.sh including target/allwinner/astar-spk/vendorsetup.sh including target/allwinner/azalea-evb/vendorsetup.sh rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ lunch You're building on Linux Lunch menu... pick a combo: 1. tulip_d1-tina 2. tulip_d1-dragonboard 3. octopus_sch-tina 4. octopus_sch-dragonboard 5. azalea_perf2-tina 6. azalea_perf2-dragonboard 7. azalea_perf3-tina 8. azalea_perf3-dragonboard 9. octopus_dev-tina 10. octopus_dev-dragonboard 11. astar_evb-tina 12. azalea_perf1-tina 13. azalea_perf1-dragonboard 14. astar_parrot-tina 15. astar_parrot-dragonboard 16. astar_spk-tina 17. astar_spk-dragonboard 18. azalea_evb-tina 19. azalea_evb-dragonboard Which would you like?14 ============================================ PLATFORM_VERSION_CODENAME=Neptune PLATFORM_VERSION=2.0.0 TARGET_PRODUCT=astar_parrot TARGET_BUILD_VARIANT=tina TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a-neon TARGET_CPU_VARIANT=cortex-a7 TARGET_2ND_ARCH= TARGET_2ND_ARCH_VARIANT= TARGET_2ND_CPU_VARIANT= HOST_ARCH=x86_64 HOST_OS=linux HOST_OS_EXTRA=Linux-3.13.0-24-generic-x86_64-with-Ubuntu-14.04-trusty HOST_BUILD_TYPE=release BUILD_ID=57513AA3 OUT_DIR= ============================================ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j12 rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ pack -d 2、 将softap.tar.bz2解压到package/allwinner下。 将dnsmasq.tar.bz2解压并替换package/network/services下的dnsmasq文件夹。 3、配置内核： rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make kernel_menuconfig [*] Networking support ---> --- Networking support Networking options ---> （在第二屏） [ ] Network packet filtering framework (Netfilter) ---> 修改为： [*] Network packet filtering framework (Netfilter) ---> [ ] Advanced netfilter configuration 修改为： [*] Advanced netfilter configuration Core Netfilter Configuration ---> < > Netfilter NFACCT over NFNETLINK interface < > Netfilter NFQUEUE over NFNETLINK interface < > Netfilter LOG over NFNETLINK interface < > Netfilter connection tracking support < > Netfilter Xtables support (required for ip_tables) 修改为： < > Netfilter NFACCT over NFNETLINK interface < > Netfilter NFQUEUE over NFNETLINK interface < > Netfilter LOG over NFNETLINK interface <*> Netfilter connection tracking support [*] Connection mark tracking support [*] Connection tracking security mark support (NEW) （默认选中） [*] Supply CT list in procfs (OBSOLETE) [*] Connection tracking events [*] Connection tracking timeout (NEW) [*] Connection tracking timestamping < > DCCP protocol connection tracking support (EXPERIMENTAL) < > SCTP protocol connection tracking support (EXPERIMENTAL) < > UDP-Lite protocol connection tracking support < > Amanda backup protocol support < > FTP protocol support < > H.323 protocol support < > IRC protocol support < > NetBIOS name service protocol support < > SNMP service protocol support < > PPtP protocol support < > SANE protocol support (EXPERIMENTAL) < > SIP protocol support < > TFTP protocol support Connection tracking netlink interface Connection tracking timeout tuning via Netlink <*> Netfilter Xtables support (required for ip_tables) *** Xtables combined modules *** （有很多项，在下面！） <*> "conntrack" connection tracking match support <*> "state" match support < > IP virtual server support ---> 修改为： <*> IP virtual server support ---> [ ] Netfilter connection tracking (NEW) 修改为（在最后面）： [*] Netfilter connection tracking IP: Netfilter Configuration ---> < > IPv4 connection tracking support (required for NAT) 修改为： <*> IPv4 connection tracking support (required for NAT) < > IP tables support (required for filtering/masq/NAT) 修改为： <*> IP tables support (required for filtering/masq/NAT) <*> Packet filtering < > Full NAT 修改为: <*> Full NAT <*> MASQUERADE target support <*> NETMAP target support <*> REDIRECT target support <*> Packet mangling 4、配置系统： rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make menuconfig Base system ---> < > dnsmasq.............................................. DNS and DHCP server 修改为： <*> dnsmasq.............................................. DNS and DHCP server Allwinner ---> < > softap............................................... Tina softap manager (NEW) ---- 修改为： <*> softap............................................... Tina softap manager ---> --- softap............................................... Tina softap manager < > softap-demo......................................... Tina softap app demo (NEW) 修改为： <*> softap-demo......................................... Tina softap app demo Network ---> Firewall ---> < > iptables................................. IP firewall administration tool ---- 修改为： （里面不用选中） <*> iptables................................. IP firewall administration tool ---> Network ---> < > hostapd................................. IEEE 802.1x Authenticator (full) < > hostapd-common............... hostapd/wpa_supplicant common support files < > hostapd-common-old 修改为： <*> hostapd................................. IEEE 802.1x Authenticator (full) -*- hostapd-common............... hostapd/wpa_supplicant common support files < > hostapd-common-old Utilities ---> <*> playdemo................................... music play in 3 kinds of mode 修改为： < > playdemo................................... music play in 3 kinds of mode 5、配置编译加载选项： rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ find . -name netfilter.mk ./package/kernel/linux/modules/netfilter.mk ./build/netfilter.mk rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ W:\softap_ap6212a0_tinav2.1\build\netfilter.mk $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)xt_LOG)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)nf_log_common)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_V4)nf_log_ipv4)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_TCPMSS, $(P_XT)xt_TCPMSS)) $(eval $(call nf_add,IPT_CORE,CONFIG_IP_NF_TARGET_REJECT, $(P_V4)ipt_REJECT)) $(eval $(call nf_add,IPT_CORE,CONFIG_IP_NF_TARGET_REJECT, $(P_V4)nf_reject_ipv4)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MATCH_TIME, $(P_XT)xt_time)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MARK, $(P_XT)xt_mark)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)xt_LOG)) #$(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)nf_log_common)) #$(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_V4)nf_log_ipv4)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_TCPMSS, $(P_XT)xt_TCPMSS)) $(eval $(call nf_add,IPT_CORE,CONFIG_IP_NF_TARGET_REJECT, $(P_V4)ipt_REJECT)) #$(eval $(call nf_add,IPT_CORE,CONFIG_IP_NF_TARGET_REJECT, $(P_V4)nf_reject_ipv4)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MATCH_TIME, $(P_XT)xt_time)) $(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MARK, $(P_XT)xt_mark)) 不配置这里就会在这里让你选择（选择：N/y都会出错的！） rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j12 make -C /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39 HOSTCFLAGS="-O2 -I/home/wwt/softap_ap6212a0_tinav2.1/out/host/include -I/home/wwt/softap_ap6212a0_tinav2.1/out/host/usr/include -Wall -Wmissing-prototypes -Wstrict-prototypes" CROSS_COMPILE="arm-openwrt-linux-muslgnueabi-" ARCH="arm" KBUILD_HAVE_NLS=no KBUILD_BUILD_USER="" KBUILD_BUILD_HOST="" CONFIG_SHELL="bash" V='' CC="arm-openwrt-linux-muslgnueabi-gcc" modules make[5]: Entering directory `/home/wwt/softap_ap6212a0_tinav2.1/lichee/linux-3.4' scripts/kconfig/conf --silentoldconfig Kconfig drivers/net/wireless/bcmdhd/Kconfig:57:warning: defaults for choice values not supported .config:3733:warning: override: TREE_PREEMPT_RCU changes choice state * * Restart config... * * * IP: Netfilter Configuration * IPv4 connection tracking support (required for NAT) (NF_CONNTRACK_IPV4) [Y/n/m/?] y proc/sysctl compatibility with old connection tracking (NF_CONNTRACK_PROC_COMPAT) [N/y/?] n IP Userspace queueing via NETLINK (OBSOLETE) (IP_NF_QUEUE) [N/m/y/?] n IP tables support (required for filtering/masq/NAT) (IP_NF_IPTABLES) [Y/n/m/?] y "ah" match support (IP_NF_MATCH_AH) [N/m/y/?] n "ecn" match support (IP_NF_MATCH_ECN) [N/m/y/?] n "rpfilter" reverse path filter match support (IP_NF_MATCH_RPFILTER) [N/m/y/?] n "ttl" match support (IP_NF_MATCH_TTL) [N/m/y/?] n Packet filtering (IP_NF_FILTER) [Y/n/m/?] y REJECT target support (IP_NF_TARGET_REJECT) [M/n/y/?] m Force socket error when rejecting with icmp* (IP_NF_TARGET_REJECT_SKERR) [N/y/?] (NEW) n 出错： sh /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/strace-4.10/ipkg-sunxi/strace rstrip.sh: /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/strace-4.10/ipkg-sunxi/strace/usr/bin/strace: executable \$0 \$@"; ) > postinst; ( echo "#!/bin/sh"; echo ". \${IPKG_INSTROOT}/lib/functions.sh"; echo "default_prerm \$0 \$@"; ) > prerm; chmod 0755 postinst prerm; ) install -d -m0755 /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/packages/base unxi/strace /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/packages/base av2.1/out/astar-parrot/packages/base/strace_4.10-1_sunxi.ipk rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-strace strace install -d -m0755 /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-strace/usr/bin v2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-strace/usr/bin/ me/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-strace touch /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.strace_installed /rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/strace.default.install make[3]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/package/devel/strace' make[2]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1' make[1]: *** [/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1' Build failed - please re-run with -j1 to see the real error message make: *** [world] 错误 1 #### make failed to build some targets (36:27 (mm:ss)) #### rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ make -j1 rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-ap6212-firmware touch /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.ap6212-firmware_installed ; echo "ap6212-firmware" >> /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux-firmware.default.install make[3]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/package/firmware/linux-firmware' make[3]: Entering directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/package/kernel/linux' rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kernel kernel # nothing to do me/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kernel touch /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.kernel_installed diron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-input-core kmod-input-core NOTICE: module '/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39/drivers/input/input-core.ko' is built-in. ONTROL/postinst-pkg; chmod 0755 /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-input-core/CONTROL/postinst-pkg; fi ore/. /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-input-core touch /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.kmod-input-core_installed /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install unxi/kmod-ipt-core/CONTROL /home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo ERROR: module '/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39/net/netfilter/nf_log_common.ko' is missing. make[3]: *** [/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/packages/kernel/kmod-ipt-core_3.4.39-1_sunxi.ipk] Error 1 make[3]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/package/kernel/linux' make[2]: *** [package/kernel/linux/compile] Error 2 make[2]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1' make[1]: *** [/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1' make: *** [world] 错误 2 #### make failed to build some targets (16 seconds) #### rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ grep nf_log_common . -R grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39/.git/svn: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/host/u-boot-2014.10/arch/sandbox/include/asm/arch: 没有那个文件或目录 grep: ./build/.git/svn: 没有那个文件或目录 ./build/netfilter.mk:$(eval $(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_TARGET_LOG, $(P_XT)nf_log_common)) grep: ./package/.git/svn: 没有那个文件或目录 grep: ./target/.git/svn: 没有那个文件或目录 grep: ./.repo/manifests/.git/svn: 没有那个文件或目录 grep: ./tools/.git/svn: 没有那个文件或目录 grep: ./tools/.git/packed-refs: 没有那个文件或目录 grep: ./config/.git/svn: 没有那个文件或目录 grep: ./lichee/linux-3.4/.git/svn: 没有那个文件或目录 grep: ./lichee/brandy/.git/svn: 没有那个文件或目录 grep: ./scripts/.git/svn: 没有那个文件或目录 grep: ./dl/.git/svn: 没有那个文件或目录 grep: ./docs/.git/svn: 没有那个文件或目录 grep: ./prebuilt/.git/svn: 没有那个文件或目录 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib32/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib32/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/arm-openwrt-linux-muslgnueabi/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib64/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib32/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/arm-openwrt-linux/lib/lib: 符号连接的层数过多 grep: ./toolchain/.git/svn: 没有那个文件或目录 rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/rediron/r16_tinav2.1/softap_ap6212a0_tinav2.1$ make -j12 还会出现的错误： rm -rf /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common mkdir -p /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common install -d -m0755 /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common/lib/netifd install -m0644 ./files/netifd.sh /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common/lib/netifd/hostapd.sh SHELL= flock /home/wwt/softap_ap6212a0_tinav2.1/tmp/.root-copy.flock -c 'cp -fpR /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common/. /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-hostapd-common touch /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.hostapd-common_installed if [ -f /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/hostapd.supplicant-full.install.clean ]; then rm -f /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/hostapd.supplicant-full.install /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/hostapd.supplicant-full.install.clean; fi; echo "hostapd-common" >> /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/hostapd.supplicant-full.install make[3]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1/package/network/services/hostapd' make[2]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' make[1]: *** [/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' Build failed - please re-run with -j1 to see the real error message make: *** [world] 错误 1 #### make failed to build some targets (01:19 (mm:ss)) #### rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j1 or -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-install/usr/include -L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib -L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/lib -L/home/wwt/softap_ap6212a0_tinav2.1/prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/usr/lib -L/home/wwt/softap_ap6212a0_tinav2.1/prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib -znow -zrelro -L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-install/usr/lib -lsoftap -lssl /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `ECDSA_sign' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_copy' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_set_public_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_free' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_get0_public_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_get0_private_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_oct2point' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_up_ref' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_curve_nist2nid' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_generate_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_set_private_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_new_by_curve_name' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_get0_group' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_method_of' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_METHOD_get_field_type' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_point2oct' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_get_curve_name' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_get_conv_form' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_free' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_new' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_GROUP_get_degree' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_set_group' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `ECDSA_verify' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EVP_PKEY_set1_EC_KEY' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_free' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_POINT_new' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `ECDH_compute_key' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_dup' /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib/libssl.so: undefined reference to `EC_KEY_new_by_curve_name' collect2: error: ld returned 1 exit status make[4]: *** [softap_test] Error 1 make[4]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/demo' make[3]: *** [/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/.built] Error 2 make[3]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/softap' make[2]: *** [package/allwinner/softap/compile] Error 2 make[2]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' make[1]: *** [/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' make: *** [world] 错误 2 #### make failed to build some targets (17 seconds) #### rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ find . -name libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/linuxgnueabi/libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/lgnueabihf/libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/uclgnueabi/libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/lgnueabi/libssl.so ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/install/external/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/install/lib/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/linuxgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/lgnueabihf/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/uclgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/lgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi/libssl.so ./out/astar-parrot/compile_dir/target/liballwinner/ipkg-install/usr/lib/libssl.so ./out/astar-parrot/compile_dir/target/openssl-1.0.2h/libssl.so ./out/astar-parrot/compile_dir/target/openssl-1.0.2h/ipkg-install/usr/lib/libssl.so ./out/astar-parrot/staging_dir/target/usr/lib/libssl.so rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ 根据经验可以知道全志R16平台的tinav2.1系统的SDK里面自带的库：libssl有问题。（直接删除或者改名） ./package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi/libssl.so rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ cd package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi/ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ ll 总用量 5688 drwxrwxr-x 3 rootroot rootroot 4096 11月 2 2016 ./ drwxrwxr-x 7 rootroot rootroot 4096 11月 2 2016 ../ -rwxrwxr-x 1 rootroot rootroot 135064 11月 2 2016 libaw_aacdec.so* -rwxrwxr-x 1 rootroot rootroot 33844 11月 2 2016 libaw_alacdec.so* -rwxrwxr-x 1 rootroot rootroot 170664 11月 2 2016 libaw_amrdec.so* -rwxrwxr-x 1 rootroot rootroot 76748 11月 2 2016 libaw_apedec.so* -rwxrwxr-x 1 rootroot rootroot 116336 11月 2 2016 libaw_atrcdec.so* -rwxrwxr-x 1 rootroot rootroot 69756 11月 2 2016 libaw_cookdec.so* -rwxrwxr-x 1 rootroot rootroot 55152 11月 2 2016 libaw_flacdec.so* -rwxrwxr-x 1 rootroot rootroot 77500 11月 2 2016 libaw_mp3dec.so* -rwxrwxr-x 1 rootroot rootroot 130672 11月 2 2016 libaw_oggdec.so* -rwxrwxr-x 1 rootroot rootroot 8100 11月 2 2016 libaw_plugin.so* -rwxrwxr-x 1 rootroot rootroot 59284 11月 2 2016 libaw_radec.so* -rwxrwxr-x 1 rootroot rootroot 68296 11月 2 2016 libaw_siprdec.so* -rwxrwxr-x 1 rootroot rootroot 70072 11月 2 2016 libaw_wavdec.so* -rwxrwxr-x 1 rootroot rootroot 87996 11月 2 2016 libcdc_adecoder_debug.so* -rwxrwxr-x 1 rootroot rootroot 35652 11月 2 2016 libcdc_adecoder.so* -rwxrwxr-x 1 rootroot rootroot 166808 11月 2 2016 libcdc_aencoder.so* -rwxrwxr-x 1 rootroot rootroot 1500820 11月 2 2016 libcrypto.so* drwxrwxr-x 2 rootroot rootroot 4096 11月 2 2016 lib_debug/ -rwxrwxr-x 1 rootroot rootroot 1179664 11月 2 2016 liblive555.so* -rwxrwxr-x 1 rootroot rootroot 14464 11月 2 2016 libpostprocess.so* -rwxrwxr-x 1 rootroot rootroot 4672 11月 2 2016 librw_data_api.so* -rwxrwxr-x 1 rootroot rootroot 341764 11月 2 2016 libssl.so* -rwxrwxr-x 1 rootroot rootroot 1282208 11月 2 2016 libxml2.so* -rwxrwxr-x 1 rootroot rootroot 80792 11月 2 2016 libz.so* rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ mv libssl.so libssl.so_bak rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1/package/allwinner/liballwinner/LIBRARY/EXTERNAL/lib32/muslgnueabi$ cd - /home/wwt/softap_ap6212a0_tinav2.1 rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j1 rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ pack -d 6、刷机之后，在串口终端中通过softap_test打开softap出错（查明是全志给的patch的路径的问题！） [ 16.536954] dhd_prot_ioctl : bus is down. we have nothing to do [ 16.543761] bcmsdh_oob_intr_unregister: Enter [ 16.548794] bcmsdh_oob_intr_unregister: irq is not registered [ 16.555292] dhd_txglom_enable: enable 0 [ 16.559734] dhd_bus_devreset: WLAN OFF DONE [ 16.564616] wifi_platform_set_power = 0 [ 16.568970] ======== PULL WL_REG_ON LOW! ======== [ 16.574416] [wifi_pm]: wifi power off [ 16.578581] dhdsdio_probe : the lock is released. [ 16.584007] dhd_module_init: Exit err=0 [ 16.591551] xt_time: kernel timezone is -0000 [ 17.648758] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B [ 17.662302] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B [ 17.678544] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B [ 17.850121] android_usb: already disabled [ 17.890241] adb_open [ 17.892807] adb_bind_config [ 17.896040] ep_matches, wrn: endpoint already claimed, ep(0xc068721c, 0xd7a980c0, ep1in-bulk) [ 19.785448] android_usb gadget: high-speed config #1: android BusyBox v1.24.1 () built-in shell (ash) _____ _ __ _ |_ _||_| ___ _ _ | | |_| ___ _ _ _ _ | | _ | || | | |__ | || || | ||_'_| | | | || | || _ | |_____||_||_|_||___||_,_| |_| |_||_|_||_|_| Tina is Based on OpenWrt! ---------------------------------------------- Tina Linux (Neptune, 57513AA3) ---------------------------------------------- root@TinaLinux:/# root@TinaLinux:/# root@TinaLinux:/# so softap_down softap_test softap_up sort root@TinaLinux:/# so softap_down softap_test softap_up sort root@TinaLinux:/# cd /bin/ root@TinaLinux:/bin# ll so* -rwxr-xr-x 1 root root 4095 Sep 14 19:08 softap_down -rwxr-xr-x 1 root root 4095 Sep 14 19:08 softap_test -rwxr-xr-x 1 root root 8191 Sep 14 19:08 softap_up root@TinaLinux:/bin# root@TinaLinux:/bin# root@TinaLinux:/bin# softap_test *************************** Start hostapd test! *************************** Start to reload firmware! Enter: wifi_get_fw_path function, fw_type=1,Eneter: wifi_change_fw_path, fwpath = lib/firmware/fw_bcm43438a0_apsta.bin. Softap fwReload - OkMessage is: OK Reload firmware finished! Start to set softap! Message is: OK Set softap finished! [ 75.613141] dhd_open: Enter d720d000 [ 75.617247] [ 75.617249] Dongle Host Driver, version 1.201.59.3 (r506368) [ 75.617254] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2017 at 11:02:29 [ 75.633597] wl_android_wifi_on in 1 [ 75.637659] wl_android_wifi_on in 2: g_wifi_on=0 [ 75.642896] wifi_platform_set_power = 1 [ 75.647247] ======== PULL WL_REG_ON HIGH! ======== [ 75.652765] [wifi_pm]: wifi power on [ 75.960028] sdio_reset_comm(): [ 75.963526] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 75.976104] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 75.987627] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 75.998550] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 76.020809] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 76.028967] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 76.037137] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 76.047072] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 76.165734] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 76.176190] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 76.186815] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 76.197594] [ 76.197597] [ 76.197599] dhd_bus_devreset: == WLAN ON == [ 76.206013] F1 signature read @0x18000000=0x1540a9a6 [ 76.213284] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 76.221292] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 76.228727] dhdsdio_probe_init: set use_rxchain 1 from config.txt [ 76.235753] dhd_conf_read_config: Ignore config file /lib/firmware/config.txt [ 76.243796] dhd_conf_set_fw_name_by_chip: firmware_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 76.253368] Final fw_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 76.260041] Final nv_path=/lib/firmware/nvram.txt [ 76.265358] Final conf_path=/lib/firmware/config.txt [ 76.271554] dhdsdio_download_code_file: Open firmware file failed lib/firmware/fw_bcm43438a0_apsta.bin [ 76.282093] _dhdsdio_download_firmware: dongle image file download failed [ 76.289838] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 76.295753] dhd_prot_ioctl : bus is down. we have nothing to do [ 76.302529] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 76.308454] wifi_platform_set_power = 0 [ 76.312912] ======== PULL WL_REG_ON LOW! ======== [ 76.318233] [wifi_pm]: wifi power off [ 76.322408] wl_android_wifi_on: Failed [ 76.326758] dhd_open : wl_android_wifi_on failed (-35) [ 76.332573] dhd_stop: Enter d720d000 [ 76.336637] wl_android_wifi_off in 1 [ 76.340800] wl_android_wifi_off in 2: g_wifi_on=0 [ 76.346115] wl_android_wifi_off out [ 76.350093] dhd_stop: Exit [ 76.353290] dhd_open: Exit ret=-1 ifconfig: SIOCSIFFLAGS: Operation not permitted Start to start softap! Configuration file: /etc/wifi/ho[ 80.454347] dhd_open: Enter d720d000 stapd.conf [ 80.458611] [ 80.458613] Dongle Host Driver, version 1.201.59.3 (r506368) [ 80.458618] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2017 at 11:02:29 [ 80.476003] wl_android_wifi_on in 1 [ 80.479971] wl_android_wifi_on in 2: g_wifi_on=0 [ 80.485214] wifi_platform_set_power = 1 [ 80.489657] ======== PULL WL_REG_ON HIGH! ======== [ 80.495082] [wifi_pm]: wifi power on SoftAP started successfullyMessage is: OK Start softap finished! [ 80.800038] sdio_reset_comm(): [ 80.803641] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 80.816148] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 80.827683] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 80.838604] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 80.860859] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 80.869016] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 80.877280] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 80.887030] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 81.005831] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.016222] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.026711] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.037496] [ 81.037499] [ 81.037502] dhd_bus_devreset: == WLAN ON == [ 81.045875] F1 signature read @0x18000000=0x1540a9a6 [ 81.053157] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 81.061161] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 81.068590] dhdsdio_probe_init: set use_rxchain 1 from config.txt [ 81.075623] dhd_conf_read_config: Ignore config file /lib/firmware/config.txt [ 81.083760] dhd_conf_set_fw_name_by_chip: firmware_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 81.093240] Final fw_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 81.099901] Final nv_path=/lib/firmware/nvram.txt [ 81.105228] Final conf_path=/lib/firmware/config.txt [ 81.111473] dhdsdio_download_code_file: Open firmware file failed lib/firmware/fw_bcm43438a0_apsta.bin [ 81.122017] _dhdsdio_download_firmware: dongle image file download failed [ 81.129672] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 81.135676] dhd_prot_ioctl : bus is down. we have nothing to do [ 81.142356] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 81.148373] wifi_platform_set_power = 0 [ 81.152740] ======== PULL WL_REG_ON LOW! ======== [ 81.158059] [wifi_pm]: wifi power off [ 81.162321] wl_android_wifi_on: Failed [ 81.166579] dhd_open : wl_android_wifi_on failed (-35) [ 81.172394] dhd_stop: Enter d720d000 [ 81.176548] wl_android_wifi_off in 1 [ 81.180623] wl_android_wifi_off in 2: g_wifi_on=0 [ 81.185942] wl_android_wifi_off out [ 81.189908] dhd_stop: Exit [ 81.193026] dhd_open: Exit ret=-1 Could not set interface wlan0 fl[ 81.196943] dhd_inetaddr_notifier_call: bus not ready, exit ags (UP): Operation not permitte[ 81.206128] dhd_open: Enter d720d000 d nl80211: Could not set interf[ 81.212702] ace 'wlan0' UP nl80211: deinit [ 81.212706] Dongle Host Driver, version 1.201.59.3 (r506368) ifname=wlan0 disabled_11b_rates=[ 81.212710] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2017 at 11:02:29 0 [ 81.236958] wl_android_wifi_on in 1 [ 81.241176] wl_android_wifi_on in 2: g_wifi_on=0 [ 81.246400] wifi_platform_set_power = 1 [ 81.250760] ======== PULL WL_REG_ON HIGH! ======== [ 81.256266] [wifi_pm]: wifi power on [ 81.570028] sdio_reset_comm(): [ 81.573521] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.586092] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.597610] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 81.608512] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 81.630743] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 81.638905] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 81.647165] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 81.656911] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 81.775658] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.785943] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.796508] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 81.807280] [ 81.807283] [ 81.807285] dhd_bus_devreset: == WLAN ON == [ 81.815693] F1 signature read @0x18000000=0x1540a9a6 [ 81.822936] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 81.830931] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 81.838356] dhdsdio_probe_init: set use_rxchain 1 from config.txt [ 81.845386] dhd_conf_read_config: Ignore config file /lib/firmware/config.txt [ 81.853427] dhd_conf_set_fw_name_by_chip: firmware_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 81.862999] Final fw_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 81.869660] Final nv_path=/lib/firmware/nvram.txt [ 81.874988] Final conf_path=/lib/firmware/config.txt [ 81.881223] dhdsdio_download_code_file: Open firmware file failed lib/firmware/fw_bcm43438a0_apsta.bin [ 81.891670] _dhdsdio_download_firmware: dongle image file download failed [ 81.899411] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 81.905327] dhd_prot_ioctl : bus is down. we have nothing to do [ 81.912108] dhd_net_bus_devreset: dhd_bus_devreset: -35 [ 81.918034] wifi_platform_set_power = 0 [ 81.922493] ======== PULL WL_REG_ON LOW! ======== [ 81.927810] [wifi_pm]: wifi power off [ 81.932073] wl_android_wifi_on: Failed [ 81.936331] dhd_open : wl_android_wifi_on failed (-35) [ 81.942144] dhd_stop: Enter d720d000 [ 81.946298] wl_android_wifi_off in 1 [ 81.950371] wl_android_wifi_off in 2: g_wifi_on=0 [ 81.955686] wl_android_wifi_off out [ 81.959742] dhd_stop: Exit [ 81.962860] dhd_open: Exit ret=-1 ifconfig: SIOCSIFFLAGS: Operation not permitted nl80211 driver initialization failed. wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED hostapd_free_hapd_data: Interface wlan0 wasn't started *************************** Hostapd test successed! *************************** root@TinaLinux:/bin# 因为softap_test的绝对路径是：/bin/softap_test。那么lib/firmware/fw_bcm43438a0_apsta.bin的路径就应该是：/bin/lib/firmware/fw_bcm43438a0_apsta.bin。 将目录/lib/firmware/fw_bcm43438a0_apsta.bin中的AP6212的库文件全部拷贝到：/bin/lib/firmware/fw_bcm43438a0_apsta.bin就可以通过softap_test正常打开softap了！ root@TinaLinux:/bin# root@TinaLinux:/bin# mkdir -p lib/firmware/ root@TinaLinux:/bin# cd lib/firmware/ root@TinaLinux:/bin/lib/firmware# ll drwxr-xr-x 2 root root 1024 Sep 16 03:16 . drwxr-xr-x 3 root root 1024 Sep 16 03:16 .. root@TinaLinux:/bin/lib/firmware# cd /lib/firmware/ root@TinaLinux:/lib/firmware# ll drwxr-xr-x 2 root root 139 Sep 14 19:08 . drwxr-xr-x 10 root root 681 Sep 14 19:02 .. -rw-r--r-- 1 root root 26020 Sep 14 17:31 bcm43438a0.hcd -rw-r--r-- 1 root root 378595 Sep 14 17:31 fw_bcm43438a0.bin -rw-r--r-- 1 root root 309352 Sep 14 17:31 fw_bcm43438a0_apsta.bin -rw-r--r-- 1 root root 336323 Sep 14 17:31 fw_bcm43438a0_p2p.bin -rw-r--r-- 1 root root 902 Sep 14 17:31 nvram.txt root@TinaLinux:/lib/firmware# cp * /bin/lib/firmware/ root@TinaLinux:/lib/firmware# cd /bin/lib/firmware/ root@TinaLinux:/bin/lib/firmware# ll drwxr-xr-x 2 root root 1024 Sep 16 03:17 . drwxr-xr-x 3 root root 1024 Sep 16 03:16 .. -rw-r--r-- 1 root root 26020 Sep 16 03:17 bcm43438a0.hcd -rw-r--r-- 1 root root 378595 Sep 16 03:17 fw_bcm43438a0.bin -rw-r--r-- 1 root root 309352 Sep 16 03:17 fw_bcm43438a0_apsta.bin -rw-r--r-- 1 root root 336323 Sep 16 03:17 fw_bcm43438a0_p2p.bin -rw-r--r-- 1 root root 902 Sep 16 03:17 nvram.txt root@TinaLinux:/bin/lib/firmware# cd /bin/ root@TinaLinux:/bin# root@TinaLinux:/bin# root@TinaLinux:/bin# softap_test *************************** Start hostapd test! *************************** Start to reload firmware! Enter: wifi_get_fw_path function, fw_type=1,Eneter: wifi_change_fw_path, fwpath = lib/firmware/fw_bcm43438a0_apsta.bin. Softap fwReload - OkMessage is: OK Reload firmware finished! Start to set softap! Message is: OK Set softap finished! [ 190.043911] dhd_open: Enter d720d000 [ 190.048003] [ 190.048006] Dongle Host Driver, version 1.201.59.3 (r506368) [ 190.048010] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2017 at 11:02:29 [ 190.064444] wl_android_wifi_on in 1 [ 190.068411] wl_android_wifi_on in 2: g_wifi_on=0 [ 190.073643] wifi_platform_set_power = 1 [ 190.078087] ======== PULL WL_REG_ON HIGH! ======== [ 190.083512] [wifi_pm]: wifi power on [ 190.390029] sdio_reset_comm(): [ 190.393528] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.406118] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.417559] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 190.428484] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B [ 190.450739] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 190.458990] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 190.467164] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 190.477004] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 190.595621] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.606060] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.616684] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 190.627433] [ 190.627436] [ 190.627439] dhd_bus_devreset: == WLAN ON == [ 190.635854] F1 signature read @0x18000000=0x1540a9a6 [ 190.643122] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 190.651026] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 190.658542] dhdsdio_probe_init: set use_rxchain 1 from config.txt [ 190.665481] dhd_conf_read_config: Ignore config file /lib/firmware/config.txt [ 190.673620] dhd_conf_set_fw_name_by_chip: firmware_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 190.683192] Final fw_path=lib/firmware/fw_bcm43438a0_apsta.bin [ 190.689763] Final nv_path=/lib/firmware/nvram.txt [ 190.695090] Final conf_path=/lib/firmware/config.txt [ 190.733434] NVRAM version: AP6212_NVRAM_V1.0_20140603 [ 190.742372] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 190.804325] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 190.811066] bcmsdh_oob_intr_register: Enter [ 190.815806] bcmsdh_oob_intr_register: HW_OOB enabled [ 190.821429] bcmsdh_oob_intr_register OOB irq=7 flags=414 [ 190.827623] bcmsdh_oob_intr_register: enable_irq_wake [ 190.833345] bcmsdh_oob_intr_register: enable_irq_wake failed with -6 [ 190.841211] dhd_conf_set_band: Set band 0 [ 190.848224] Firmware up: op_mode=0x0002, MAC=02:1a:11:f9:3d:89 [ 190.854908] dhd_conf_set_country: Set country CN, revision 0 [ 190.924854] Country code: CN (CN/0) [ 190.929416] dhd_conf_set_roam: Set roam_off 1 [ 190.940302] dhd_arp_offload_enable: failed to enabe ARP offload to 0, retcode = -23 [ 190.949649] dhd_arp_offload_set: failed to set ARP offload mode to 0x0, retcode = -23 [ 190.959035] Firmware version = wl0: Jun 6 2014 14:57:15 version 7.10.226.49 (r) FWID 01-cf4a5122 [ 190.969088] Driver: 1.201.59.3 (r506368) [ 190.969093] Firmware: wl0: Jun 6 2014 14:57:15 version 7.10.226.49 (r) FWID 01-cf4a5122 [ 190.983566] dhd_txglom_enable: enable 1 [ 190.987919] dhd_conf_set_disable_proptx: set disable_proptx 0 [ 190.996601] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79 [ 191.004833] dhd_wlfc_init(): wlfc_mode=0x0, ret=-23 [ 191.011090] wl_android_wifi_on: Success [ 191.085709] dhd_open: Exit ret=0 Start to start softap! Configuration file: /etc/wifi/hostapd.conf nl80211: Could not re-add multic[ 195.098274] netdev_ifidx(5), chan_type(1) target channel(6) ast membership for vendor events: -2 (No such file or directory) [ 195.159332] Disconnect STA : ff:ff:ff:ff:ff:ff scb_val.val 3 Using interface wlan0 with hwaddr 02:1a:11:f9:3d:89 and ssid "Smart-AW-HOSTAPD" VLAN: vlan_set_name_type: SET_VLAN_NAME_TYPE_CMD name_type=2 failed: No error information SoftAP started successfullyMessage is: OK Start softap finished! wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED *************************** Hostapd test successed! *************************** root@TinaLinux:/bin# root@TinaLinux:/bin# 7、查找/修改路径lib/firmware/fw_bcm43438a0_apsta.bin的位置，解决问题！ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ grep "lib/firmware/fw_bcm43438a0_apsta.bin" . -R grep: ./target/.git/svn: 没有那个文件或目录 grep: ./dl/.git/svn: 没有那个文件或目录 grep: ./scripts/.git/svn: 没有那个文件或目录 grep: ./toolchain/.git/svn: 没有那个文件或目录 grep: ./lichee/brandy/.git/svn: 没有那个文件或目录 grep: ./lichee/linux-3.4/.git/svn: 没有那个文件或目录 grep: ./.repo/manifests/.git/svn: 没有那个文件或目录 grep: ./tools/.git/packed-refs: 没有那个文件或目录 grep: ./tools/.git/svn: 没有那个文件或目录 ./package/allwinner/softap/src/include/wifi.h:#define WIFI_DRIVER_FW_PATH_AP "lib/firmware/fw_bcm43438a0_apsta.bin" grep: ./package/.git/svn: 没有那个文件或目录 grep: ./config/.git/svn: 没有那个文件或目录 grep: ./prebuilt/.git/svn: 没有那个文件或目录 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/arm-openwrt-linux-muslgnueabi/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib64/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/arm-openwrt-linux/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib/lib: 符号连接的层数过多 grep: ./prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib32/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux-musl/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib64/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib64/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/aarch64-openwrt-linux/lib/lib: 符号连接的层数过多 grep: 警告: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib32/lib64: 嵌套目录循环 grep: ./prebuilt/gcc/linux-x86/aarch64/toolchain-sunxi/toolchain/lib32/lib: 符号连接的层数过多 grep: ./docs/.git/svn: 没有那个文件或目录 grep: ./build/.git/svn: 没有那个文件或目录 grep: 警告: ./out/astar-parrot/compile_dir/target/alsa-lib-1.1.0/include/alsa: 嵌套目录循环 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/ccX0DZGY.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/arjGlms3: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/.xrdp/xrdp-Wpph9R: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/.xrdp/xrdp-sesman-j8EDdT: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/ccZVA9SY.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/ccX0uKZX.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/jack-sam: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/cc61XiF1.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/config-err-1dsmuu: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/.X11-unix/X0: 没有那个设备或地址 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/ccsCfxm0.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/rootfs/var/.ICE-unix/1629: 没有那个设备或地址 grep: ./out/astar-parrot/compile_dir/target/rootfs/etc/fstab: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/rootfs/etc/resolv.conf: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/rootfs/etc/localtime: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/rootfs/etc/TZ: 没有那个文件或目录 匹配到二进制文件 ./out/astar-parrot/compile_dir/target/rootfs/lib/libsoftap.so ./out/astar-parrot/compile_dir/target/rootfs/usr/lib/opkg/info/ap6212-firmware.list:/lib/firmware/fw_bcm43438a0_apsta.bin grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/iptables-1.4.21/ipkg-install/usr/bin/iptables-xml: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/linux-3.4.39/.git/svn: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/ccYUdHeN.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/ccwnGT98.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/arjGlms3: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/.xrdp/xrdp-Wpph9R: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/.xrdp/xrdp-sesman-j8EDdT: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/jack-sam: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/config-err-1dsmuu: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/ccKPHt0a.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/.X11-unix/X0: 没有那个设备或地址 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/ccTjmDl9.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/cchl8Q5Z.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/.ICE-unix/1629: 没有那个设备或地址 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/cc8cLhMk.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/var/cchrl5HM.s: 权限不够 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/etc/fstab: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/etc/resolv.conf: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/etc/localtime: 没有那个文件或目录 grep: ./out/astar-parrot/compile_dir/target/linux-astar-parrot/base-files/ipkg-sunxi/base-files/etc/TZ: 没有那个文件或目录 匹配到二进制文件 ./out/astar-parrot/compile_dir/target/softap-0.0.1/src/libsoftap.so ./out/astar-parrot/compile_dir/target/softap-0.0.1/src/include/wifi.h:#define WIFI_DRIVER_FW_PATH_AP "lib/firmware/fw_bcm43438a0_apsta.bin" 匹配到二进制文件 ./out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-sunxi/softap/lib/libsoftap.so 匹配到二进制文件 ./out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-install/usr/lib/libsoftap.so grep: ./out/astar-parrot/compile_dir/host/u-boot-2014.10/arch/sandbox/include/asm/arch: 没有那个文件或目录 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/.xrdp/xrdp-Wpph9R: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/.xrdp/xrdp-sesman-j8EDdT: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/jack-sam: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccOJeBXg.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccx3i6ni.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/config-err-1dsmuu: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccyysPO4.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccvMBZVn.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/.X11-unix/X0: 没有那个设备或地址 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/cc2RTnRj.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/arXGbM2T: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/.ICE-unix/1629: 没有那个设备或地址 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccngUTgH.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/var/ccbLfznO.s: 权限不够 grep: ./out/astar-parrot/staging_dir/target/rootfs/etc/fstab: 没有那个文件或目录 grep: ./out/astar-parrot/staging_dir/target/rootfs/etc/resolv.conf: 没有那个文件或目录 grep: ./out/astar-parrot/staging_dir/target/rootfs/etc/localtime: 没有那个文件或目录 grep: ./out/astar-parrot/staging_dir/target/rootfs/etc/TZ: 没有那个文件或目录 匹配到二进制文件 ./out/astar-parrot/staging_dir/target/rootfs/lib/libsoftap.so 匹配到二进制文件 ./out/astar-parrot/staging_dir/target/lib/libsoftap.so rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ W:\softap_ap6212a0_tinav2.1\package\allwinner\softap\src\include\wifi.h #ifndef WIFI_DRIVER_FW_PATH_AP #define WIFI_DRIVER_FW_PATH_AP "lib/firmware/fw_bcm43438a0_apsta.bin" #endif #ifndef WIFI_DRIVER_FW_PATH_P2P #define WIFI_DRIVER_FW_PATH_P2P "lib/firmware/fw_bcm43438a0_p2p.bin" #endif 修改为： #ifndef WIFI_DRIVER_FW_PATH_AP //#define WIFI_DRIVER_FW_PATH_AP "lib/firmware/fw_bcm43438a0_apsta.bin" #define WIFI_DRIVER_FW_PATH_AP "/lib/firmware/fw_bcm43438a0_apsta.bin" #endif #ifndef WIFI_DRIVER_FW_PATH_P2P //#define WIFI_DRIVER_FW_PATH_P2P "lib/firmware/fw_bcm43438a0_p2p.bin" #define WIFI_DRIVER_FW_PATH_P2P "/lib/firmware/fw_bcm43438a0_p2p.bin" #endif rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j12 ONTROL/postinst-pkg; echo "insert_modules $modules" >> /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-net-ap6212/CONTROL/postinst-pkg; chmod 0755 /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-net-ap6212/CONTROL/postinst-pkg; fi SHELL= flock /home/wwt/softap_ap6212a0_tinav2.1/tmp/.root-copy.flock -c 'cp -fpR /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-net-ap6212/. /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/' rm -rf /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/tmp-kmod-net-ap6212 touch /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/rootfs/stamp/.kmod-net-ap6212_installed if [ -f /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install.clean ]; then rm -f /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install.clean; fi; echo "kmod-net-ap6212" >> /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/pkginfo/linux.default.install make[3]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1/package/kernel/linux' make[2]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' make[1]: *** [/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory `/home/wwt/softap_ap6212a0_tinav2.1' Build failed - please re-run with -j1 to see the real error message make: *** [world] 错误 1 #### make failed to build some targets (8 seconds) #### rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ rootroot@cm-System-Product-Name:/home/wwt/softap_ap6212a0_tinav2.1$ make -j1 #softap_test make -C /home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/demo/ ARCH="arm" AR="arm-openwrt-linux-muslgnueabi-ar" CC="arm-openwrt-linux-muslgnueabi-gcc" CXX="arm-openwrt-linux-muslgnueabi-g++" CFLAGS="-Os -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -fno-caller-saves -fno-plt -mfloat-abi=hard -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro" LDFLAGS="-L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/usr/lib -L/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/staging_dir/target/lib -L/home/wwt/softap_ap6212a0_tinav2.1/prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/usr/lib -L/home/wwt/softap_ap6212a0_tinav2.1/prebuilt/gcc/linux-x86/arm/toolchain-sunxi/toolchain/lib -znow -zrelro" CONFIG_PREFIX="/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/ipkg-install" all make[4]: Entering directory `/home/wwt/softap_ap6212a0_tinav2.1/out/astar-parrot/compile_dir/target/softap-0.0.1/demo' arm-openwrt-linux-muslgnueabi-gcc -o softap_test softap_test.c -Os -pipe -march=armv
android dev usb,如何给/ dev / bus / usb权限的libusb android应用程序？
我正在开发一个通过jni使用libusb的应用程序.此应用程序目前只针对rooted,usb-hostAndroid 3机器.情况如下：loads which wraps that uses that needs rw access to: /dev/bus/usb/所有.so本机库都是我在/ system / lib上安装(作为root用户)的基础架构的一部分,然后可以由java活动使用,由简单...
# android 系统修改/dev/bus/usb/*和串口的访问权限
修改android源码中usb下的设备 和串口的访问权限。更改的文件为ueventd.rc /dev/bus/usb/* 0666 root usb /dev/ttyS* 0666 system system
android10+ User has not given permission to access device /dev/bus/usb/005/002
UVC的项目，在Android10以上系统运行后报错：User has not given permission to access device /dev/bus/usb/005/002 对比了一下发现是UsbDevice.getSerialNumber()的时候报的异常，尝试搜了一些资料无果，于是与android8系统对比了一下，将这里强行定制化了。 因为我们是用固定的摄像头去生产产品，即使这里不改其他地方也有限制，所以直接在这里改了。 尝试了下网上开源的UVC项目也是崩溃，git项目
Android

80,351

社区成员

91,288

社区内容

发帖
与我相关
我的任务
社区描述
移动平台 Android
androidandroid-studioandroidx 技术论坛（原bbs）
社区管理员
  • Android
  • yechaoa
  • 失落夏天
加入社区
  • 近7日
  • 近30日
  • 至今

加载中

查看更多榜单
社区公告
暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章