社区
一般软件使用
帖子详情
USB babble detected
todayisholiday
2011-09-07 09:01:43
最近想用S3C2440的USB模块加上NAND FLASH实现一个128M的U盘,在成功完成枚举之后,开始接受UFI命令,可是返回数据以相应READ10命令时,总是出现babble detected,主机只能接到前面的几十个字节的数据,然后就是复位,重复发送READ CAPACITY和READ10命令,在重复了很多遍之后就一直发送TEST UNIT READY.而且用鼠标右键点击U盘盘符就卡在那里!请问有人遇到过这种情况吗?
...全文
975
1
打赏
收藏
USB babble detected
最近想用S3C2440的USB模块加上NAND FLASH实现一个128M的U盘,在成功完成枚举之后,开始接受UFI命令,可是返回数据以相应READ10命令时,总是出现babble detected,主机只能接到前面的几十个字节的数据,然后就是复位,重复发送READ CAPACITY和READ10命令,在重复了很多遍之后就一直发送TEST UNIT READY.而且用鼠标右键点击U盘盘符就卡在那里!请问有人遇到过这种情况吗?
复制链接
扫一扫
分享
转发到动态
举报
写回复
配置赞助广告
用AI写文章
1 条
回复
切换为时间正序
请发表友善的回复…
发表回复
打赏红包
todayisholiday
2011-09-08
打赏
举报
回复
color=#FF0000]求高手解答!!!!![[/color]
AutoHotkey110502_Install.exe
方便快捷的电脑管理软件,常用操作都可以用快捷键实现:AutoHotkey110502_Install.exe
BURNINTEST--硬件检测工具
PassMark BurnInTest V5.3 Copyright (C) 1999-2008 PassMark Software All Rights Reserv
ed
http://www.passmark.com Overview ======== Passmark's BurnInTest is a software tool that allows all the major sub-systems of a computer to be simultaneously test
ed
for reliability and stability. Status ====== This is a shareware program. This means that you ne
ed
to buy it if you would like to continue using it after the evaluation period. Installation ============ 1) Uninstall any previous version of BurnInTest 2) Double click (or Open) the download
ed
".exe" file 3) Follow the prompts UnInstallation ============== Use the Windows control panel, Add / Remove Programs Requirements ============ - Operating System: Windows 2000, XP, 2003 server, Vista (*) - RAM: 32 Meg - Disk space: 6 Meg of free hard disk space (plus an additional 10Meg to run the Disk test) - DirectX 9.0c or above software for 3D graphics and video tests (plus working DirectX drivers for your video card) - SSE compatible CPU for SSE tests - A printer to run the printer test, set-up as the default printer in Windows. - A CD ROM + 1 Music CD or Data CD to run the CD test. - A CD-RW to run the CD burn test. - A network connection and the TCP/IP networking software install
ed
for the Network Tests Pro version only: - A serial port loop back plug for the serial port test. - A parallel port loop back plug for the parallel port test. - A
USB
port loop back plug for the
USB
port test. - A
USB
2.0 port loop back plug for the
USB
2.0 port test. - PassMark ModemTest V1.3 1010 (or higher) for Plugin Modem testing. - PassMark KeyboardTest V2.2 1011 (or higher) for Plugin Keyboard testing. - PassMark Firewire Plugin V1.0 1000 (or higher) and a 揔anguru FireFlash?drive for Plugin Firewire testing. (*) Windows 2000 does not support the CD-RW burn test. The advanc
ed
RAM test is only available under Windows 2000 and Windows XP professional (the other RAM tests are support
ed
under the other OS's). Users must have administrator privileges. Windows 98 and Windows ME ========================= Windows 98 and ME are not support
ed
in BurnInTest version 5.3 and above. Use a version of BurnInTest prior to 5.2 for compatibility with W98 and ME. Windows 95 and Windows NT ========================= Windows 95 and NT are not support
ed
in BurnInTest version 4.0 and above. Use a version of BurnInTest prior to 3.1 for compatibility with W95 and NT. Version History =============== Here is a summary of all changes that have been made in each version of BurnInTest. Release 5.3 build 1035 revision 4 WIN32 release 10 November 2008 - Lenovo China specific build. Lenovo system
detect
ion changes. Release 5.3 build 1035 revision 3 WIN32 release 7 November 2008 - Lenovo China specific build. Lenovo system
detect
ion changes. Release 5.3 build 1035 revision 2 WIN32 release 6 November 2008 - Lenovo China specific build. Lenovo logo and Lenovo system
detect
ion changes. Release 5.3 build 1035 WIN32 release 5 November 2008 - Lenovo China specific build. Changes include: Lenovo logo add
ed
, Lenovo system support only, 32-bit BurnInTest restrict
ed
to 32-bit Windows and BurnInTest run as administrator. Release 5.3 build 1034 WIN32 release 3 October 2008 - Correction to setting the CD burn test drive in preferences. - Chang
ed
the mechanism to check for the requir
ed
DirectX Direct3D as the previous method did not work on some system (some W2003 servers). - Enhanc
ed
the mechanism to report memory hardware errors in the Memory torture test. Release 5.3 build 1033 WIN32 release 1 October 2008 - Changes to correct a BurnInTest crash problem on some systems. When the disk and standard RAM tests are run for many hours, BurnInTest may have disappear
ed
with no error message. Release 5.3 build 1030 WIN32 release 25 September 2008 - Changes to investigate a BurnInTest crash problem on XP SP3. Release 5.3 build 1028 WIN32 release 11 September 2008 - Two 2D Video memory test crash bug workarounds implement
ed
. Crashes in (i) DirectX DirectShow and (ii) ATI atiumdag.dll library. - A hang on startup has been correct
ed
. A 2 minute timeout has been add
ed
to the collection of system information. - Video playback, Hard disk and CD/DVD test 'no operations' error reporting chang
ed
. - When BurnInTest crashes, it will not generate a "minidump" file. Minidumps will ne
ed
to be sent to Microsoft as per the normal process. However, a log entry will be add
ed
to the normal BurnInTest log. - Changes to trace logging to r
ed
uce activity when trace logging is not turn
ed
on. - Note: We have seen a report of the Video Playback failing (crash) due to a faulty video codec, ffdshow.ax. If you are using this we suggest you try a different Video file and codec. Release 5.3 build 1027 revision 0003 WIN32 release 19 August 2008 - Chang
ed
the 2D test to wait for the Video Playback test in order to allow memory allocation for the Video playback test. - Chang
ed
the Memory test to wait for the Video Playback test and 3D test to allow memory allocation for these tests. - Minor changes to the No operation error watchdog timer for the CD and Hard disk tests. - Minor correction to the Butterfly seek test. - Video playback trace logging increas
ed
. Release 5.3 build 1027 revision 0002 WIN32 release 19 August 2008 - Video playback trace logging increas
ed
. Release 5.3 build 1027 WIN32 release 31 July 2008 - Correct
ed
a bug where BurnInTest would fail to start if Activity trace level 2 logging (debug level logging) was turn
ed
on and the Logging Summarize option was also select
ed
. - Minor change to the serial port test where, if "Disable RTS/CTS and DSR/DTR test phase" was select
ed
the DTR and RTS lines would be explicitly disabl
ed
to prevent any toggling of these lines. Previously these where enabl
ed
, but not explicitly toggl
ed
. Release 5.3 build 1026 WIN32 release 17 July 2008 - Updat
ed
Level 2 and Level 3 CPU cache information for newer Intel CPU's. - Updat
ed
the
detect
ion of Hyperthreading and the number of logical CPUs for a new Intel CPU. Release 5.3 build 1025 WIN32 release 11 July 2008 - Correct
ed
a Disk test bug where on rare occasions a verification error is incorrectly display
ed
. This is during the random seeking phase of the "Random data with random seeking" test mode and only occurs with some specific test settings. Release 5.3 build 1024 WIN32 release 10 July 2008 - Workaround for the rare crash bug in Vista in atklumdisp.dll at address 0x730676ae. - Add
ed
trace debug information for BurnInTest startup and the 3D test. Release 5.3 build 1022 WIN32 release 12 June 2008 - Correct
ed
a bug where the 2D video memory test in BurnInTest v5.3.1020 and v5.3.1021 would report a "Not enough video memory available for test" error if the test was run a couple of times (without closing BurnInTest). Release 5.3 build 1021 WIN32 release 5 June 2008 - 32-bit BurnInTest PRO 5.3.1020 would not start on Windows 2000. This has been correct
ed
. Release 5.3 build 1020 WIN32 release 29 May 2008 - BurnInTest could have crash
ed
on accessing bad video memory hardware in the 2D test. This problem is now just report
ed
as an error (and BurnInTest) continues. - When BurnInTest crashes, it should now generate a "minidump" file to help debug which system component caus
ed
the failure (32-bit Pro version only). - Other minor changes. Release 5.3 build 1019 WIN32 release 16 May 2008 - Correct
ed
rare crash bugs in the 2D and Video tests. - Add
ed
a hot Key, F4, to set the auto run flag and run the tests (i.e. set "-r" and then run the tests). - Other minor changes. Release 5.3 build 1018 WIN32 release 16 April 2008 - Add
ed
an operation watchdog timer for all tests. In rare cases, a single test can stop in the operating system - i.e. there is a problem in the operating system/ device driver that prevents control being return
ed
to the BurnInTest for that test. This was add
ed
for specializ
ed
serial port hardware that could lockup after several hours of testing. Release 5.3 build 1017 WIN32 release 3 April 2008 - Correct
ed
the Advanc
ed
Network test to run on non-English Operating Systems. Release 5.3 build 1016 WIN32 release 17 March 2008 - Add
ed
additional
USB
2.0 Loopback plug test initialization to ensure plugs are in a 'clean' state when starting the
USB
tests. This was add
ed
due to report
ed
USB
data verification errors after script
ed
USB
testing across multiple reboots. Release 5.3 build 1015 WIN32 release 27 February 2008 - Increas
ed
error reporting detail for the standard RAM test, when the -v command line option is us
ed
. Release 5.3 build 1014 WIN32 release 30 January 2008 - Correct
ed
a problem where the loopback sound test could run out of memory if run for several days. Release 5.3 build 1013 WIN32 release 31 December 2007 - Improv
ed
the reporting of COM port errors such that in the rare case a COM port locks up in the Operating System, the error is still report
ed
. - Correct
ed
a bug, where in rare cases, the result summary could be duplicat
ed
in a log file. - Updat
ed
license management, in an attempt to remove a rare crash on startup. Release 5.3 build 1012.0002 WIN32 release 31 October 2007 - New build of Rebooter (64-bit Windows correction). - Clarifications in the help file. Release 5.3 build 1012 WIN32 release 17 October 2007 - Chang
ed
the Standard Network Test, "Test all available NICs" such that the number of Network Addresses specifi
ed
in Preferences->Network will be the number of NICs test
ed
. This will error faulty NICs that are not
detect
ed
by the BurnInTest auto NIC
detect
ion mechanism. - Minor change to the 2D memory test when run with the 3D test (multiple large windows) and the RAM test. Aim
ed
at correcting sympton: Access Violation 0x00404CF9. - Corrections to the mapping of paths with ".\". Release 5.3 build 1011 rev 2 WIN32 release 17 September 2007 - Modifi
ed
the Multi-Process torture test to better describe a new error message introduc
ed
in V5.3.1010. Release 5.3 build 1011 - Public release WIN32 release 11 September 2007 - Correct
ed
a bug where "Limit
ed
Evaluation Version" could be display
ed
even after BUrnInTest is licens
ed
(problem introduc
ed
in 32-bit BITPRO V5.3.1010). - Chang
ed
the Sound test to allow any of the tests (Wave, Midi or MP3) to be exclud
ed
from testing by blanking the filename. - The Command line parameter "-j" (cycle disk test patterns after each test file) could fail during the Random data test due to the mechanism us
ed
in BurnInTest. The Random data test is now exclud
ed
from the test when (and only when) the "-j" command line parameter is specifi
ed
. - In rare circumstances, the 2D test number of operations could potentially overflow and become negative. This has been correct
ed
. - In rare circumstances, BurnInTest could hang if there was a system problem in rebooting the system (ie. it fail
ed
to shutdown) using PassMark Rebooter. This has been correct
ed
. Release 5.3 build 1010 - Public release WIN32 release 28 August 2007 WIN64 release 28 August 2007 - As BurnInTest exercises system components, it is possible for faulty hardware or device drivers to cause software exceptions. These are normally seen as Windows reporting an "Access Violation". Changes have been made to handle these errors for the memory tests (for faulty RAM) and direct device driver access (for some device driver errors), as well as overarching more generic handling of these types of errors. - Correct
ed
a software failure bug on startup (particularly Vista) where a DirectX function was causing software failures in "dsetup.dll". - Updat
ed
the "Activity Event" generat
ed
with the periodic results summary report to be number
ed
(from 1 upwards) such that when "Logging->Summarize", these events are not summariz
ed
. - Correct
ed
a bug where the HTML log name could include a duplicate of the filename prefix. - Updat
ed
to the Common Errors section of help. Release 5.3 build 1009 - Public release WIN32 release 16 August 2007 - Correct
ed
a 'zip' version cleanup problem. Release 5.3 build 1008 - Komputer Swiat Expert magazine version WIN32 STD release 14 August 2007 Release 5.3 build 1007 - Public release WIN32 release 7 August 2007 - Correct
ed
a disk test startup problem for some large RAID systems when SMART testing is select
ed
. - Add
ed
additional logging for the disk test when an error occurs. - Chang
ed
the 3D test when run with the 2D EMC test to be 'behind' the EMC scrolling H's test. Allow
ed
the test to be easily exit
ed
when running the 3D test in Fullscreen mode. - Minor corrections to the Advanc
ed
Network test. - Chang
ed
the log file reference of "Network Name" to "Computer Name". WIN64 specific: - MMX and 3DNow! are obsolete for native 64-bit applications. BurnInTest has been chang
ed
to show "NA" (Not applicable) in the test window for these tests. Release 5.3 build 1006 - Limit
ed
release WIN32 release 17 July 2007 - Standard Network Test changes: - Increas
ed
the number of destination IP addresses from 4 to 6. - Add
ed
an option (default) "Test all available NICs", which will force traffic down every system NIC with a basic algorithm of NIC1 to IP Address 1, NIC2 to IP Address 2 etc. - Advanc
ed
Network test changes: - Simplifi
ed
the test. - Remov
ed
the UDP and FTP options. The Standard Network test can be us
ed
as a UDP test. - Remov
ed
the Advanc
ed
Network test specific logging, and includ
ed
all relevant logging in the standard BurnInTest logging mechanism. - Replac
ed
the complicat
ed
dynamic balancing of any system NIC to any Endpoint NIC with a simpler static allocation on test startup. - Chang
ed
the error
detect
ion mechanism to
detect
errors much more quickly. - Re-work
ed
the errors report
ed
. - Chang
ed
the CPU throttling mechanism to r
ed
uce the CPU load. - Updat
ed
endpoint.exe. - Remov
ed
checkend.exe (now obsolete). - Chang
ed
the logging rollover to work with the output of interim results (e.g. per 1 minute). Previously rollover only occurr
ed
on error events written to the log. This also correct
ed
an issue where interim results summary logging could be written to the physical disk with some delay (bas
ed
on Windows disk caching). - Correct
ed
the "Unknown" reporting of some operating systems. - Add
ed
the skipping of the Butterfly seek disk test when run on Vista and insufficient privileges. A notification of this is logg
ed
. - Intel Quad core L2 cache size reporting has been add
ed
. - Add
ed
new SMART threshold descriptions. - Add
ed
new disk test options, access
ed
via command line parameters: /ka: keep disk test files in all cases (c.f. /k keep disk test files on error). /j: cycle patterns between test files. Note: Random seeking will be skipp
ed
in this case. This option has been add
ed
to allow multiple test patterns to be us
ed
across very large disks. - Add
ed
an option to make some test settings unavailable to the user. An example configuration file available on request. Release 5.3 build 1005 0001 (STD only) - Public release WIN32 release 29 June 2007 - Correct
ed
a bug introduc
ed
in v5.3.1005.0000 STD (only) where the disk test would use up more and more system resources, thus causing test failures. Release 5.3 build 1005 rev 0003 (PRO only) - Limit
ed
public release WIN32 release 21 June 2007 - Correction to the behavior of a static RAM test pattern (rather than the default Cyclic pattern). Release 5.3 build 1005 rev 0002 (PRO only) - Limit
ed
public release WIN32 release 15 June 2007 - The "Select all CD/DVD drives" preferences option has been made user configurable, rather than using pre-defin
ed
test settings. Release 5.3 build 1005 rev 0001 (PRO only) - Limit
ed
public release WIN32 release 13 June 2007 - Bug correction for the CD auto selection feature. Release 5.3 build 1005 - Public release WIN32 release 18 May 2007 WIN64 release 18 May 2007 - In a number of cases, such as when specifying the post test application, uppercase application names were not accept
ed
. This has been correct
ed
. - The default font height in the 2D scrolling H's test should have been Arial 9. This has been chang
ed
. - The BurnInTest Video playback test incompatibility with Nero 6 and Nero 7 has been resolv
ed
. - The BurnInTest disk test throughput for dual core systems has been improv
ed
. Release 5.3 build 1004 rev2 - Limit
ed
release WIN32 release 8 May 2007 - Chang
ed
the Standard Network Test to better report packet error ratios. In addition, a new warning has been add
ed
to indicate that errors have been
detect
ed
but not enough packets have been attempt
ed
to be sent to determine accurately whether the configur
ed
error ratio has been exce
ed
ed
. - Correct
ed
a bug where the "append to existing" logging option did not work across script
ed
reboots, and a new log file was creat
ed
instead of appending to the existing log file. - If the 3D test was running, then BurnInTest block
ed
a forc
ed
close of BurnInTest, this blocking has been remov
ed
. - Chang
ed
the PASS and FAIL windows so they can now also be clos
ed
by selecting the Windows Close "X" button. Release 5.3 build 1004 - Public release WIN32 release 10 April 2007 WIN64 release 10 April 2007 - Correct
ed
a problem introduc
ed
in BurnInTest v5.2 where BurnInTest could run out of memory (the main symptom) when tests where run for long periods (> 12hours). WIN64 specific: - Correct
ed
a bug where the number of cores report
ed
on a Quad core system was incorrectly report
ed
as CPU packages. Release 5.3 build 1003 - Limit
ed
release WIN32 release 3 April 2007 - A new 2D GUI (Graphical User Interface) test has been add
ed
to the standard 2D graphics test. - Resolv
ed
an issue where BurnInTest would fail to start on Vista systems with DEP enabl
ed
for all programs. - On some systems, the Disk test could pause momentarily even when a duty cycle of 100% was specifi
ed
. This pause has been remov
ed
. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipp
ed
as they are unavailable for testing. - Minor bug corrections. Release 5.3 build 1002 rev 0001 - Limit
ed
release WIN32 release 16 March 2007 - Changes to the new 3D test: - Add
ed
a Full screen non-window
ed
test for the primary monitor, where the resolution can be select
ed
from those support
ed
by the Graphics card. - Add
ed
the user option of changes the vertical sync in the full screen non-window
ed
test to be either the Maximum rate of the graphics card, or to be the rate of the monitor (this may prevent some flicker). - Add
ed
a more complex water texture using DirectX Vertex Shader 2.0 and Pixel Shader 2.0 effects (if support
ed
by the graphics card). This applies to 3D test windows that are 800x600 or larger. - Chang
ed
some error messages from window displays (that require user intervention) to standard error reporting. Add
ed
new 3D error messages and more detail in the error reporting. - Chang
ed
the definition of an operation to be a successfully display
ed
frame. - Chang
ed
the definition of a cycle to be 2000 frames. - Chang
ed
2D video memory test to wait until the 3D test starts (as per V5.2 and earlier). - A new version of rebooter has been includ
ed
. - If BurnInTest is start
ed
with the -p command line parameter (to use the bit.exe directory for files such as the configuration file), then BurnInTest will start rebooter with the -p option. This can be useful when running BurnInTest and Rebooter from a
USB
drive. Release 5.3 build 1002 - Limit
ed
release WIN32 release 19 March 2007 - Correct
ed
a bug introduc
ed
in V5.2 where selecting accumulat
ed
logging could lead to rebooter failing to launch. Release 5.3 build 1001 - Limit
ed
release WIN32 release 16 March 2007 - The 3D test has been improv
ed
. The 3D ball test has been replac
ed
with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been chang
ed
to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been add
ed
for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. Release 5.3 build 1001 - Limit
ed
release WIN32 release 16 March 2007 - The 3D test has been improv
ed
. The 3D ball test has been replac
ed
with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been chang
ed
to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been add
ed
for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. - BurnInTest uses DirectX 9.0c. This version of BurnInTest uses a more recent version of the Microsoft DirectX Direct3D component, October 2006. BurnInTest has been modifi
ed
to
detect
and install this component (file) if it does not exist. - A command line parameter -X has been add
ed
to skip the DirectX version checking on BurnInTest start-up. - With the recent introduction of multi-monitor support for the Video Playback test, it is now more likely that the system will run out of memory when running multiple video tests simultaneously, particularly when more memory intensive codecs are us
ed
. A specific Insufficient resources to complete test message has been add
ed
in this case, rather than the previous more generic unrecoverable error message. The video test have been chang
ed
to attempt recovery from this and the more generic unrecoverable error, by closing the current video and opening the next. The logging detail has been increas
ed
. - Note: The BurnIntest sample video pack has been alter
ed
with the DivX Compress
ed
Video file being remov
ed
due to the DivX codec failing with this Video file when us
ed
with multiple simultaneous Video playbacks. Access Violation: 0x69756e65. See: http://www.passmark.com/download/bit_download.htm - The video description is now collect
ed
for a larger range of Vista systems. - Windows 98 and ME are no longer support
ed
. Please see www.passmark.com for a link to an older version of BurnInTest that will support W98/ME. Release 5.3 build 1000 rev2 - Limit
ed
release WIN32 release 9 March 2007 - A command line parameter -P has been add
ed
to allow the BurnInTest directory to be us
ed
rather than the User's personal directory. This may be useful when running BurnInTest from a
USB
drive for example. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipp
ed
as they are unavailable for testing. - A change has been made to support Hmonitor temperature monitoring on Vista. - A number of undocument
ed
command line parameters have been document
ed
: -B: BurnInTest will generate additional Serial port test information when activity trace level 2 logging is set. -E [data]: Specifies the test data to use in the serial port test. -M: Automatically display the Machine ID Window when BurnInTest is start
ed
. -U: Force BurnInTest to set logging on at startup. Release 5.3 build 1000 - Limit
ed
release WIN32 release 8 March 2007 - Chang
ed
the 2D and Video playback tests to support multi-monitor testing. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipp
ed
as they are unavailable for testing. Release 5.2 build 1006 - Limit
ed
release WIN32 release 1 March 2007 - Correct
ed
a bug where BurnInTest would fail to start on certain Vista systems. - Correct
ed
a bug where some files where the full path was not specifi
ed
would be incorrectly referenc
ed
in the Program Files directory, rather than the user personal directory. Release 5.2 build 1005 - Public release WIN32 release 21 February 2007 WIN64 release 21 February 2007 - Updat
ed
the Graphics card description for Windows Vista systems. - Updat
ed
the Advanc
ed
Network test to indicate that elevat
ed
administrator privileges are requir
ed
when running on Vista. - Mov
ed
files from the Program files directory for the Advanc
ed
Network Test (BurnInTest, EndPoint and CheckEnd). Specifically, the User Application directory is now us
ed
for the temporary test FTP files and the User Personal directory is now us
ed
for the log and configuration files. - Updat
ed
the cleanup process for when running the "zip" version of BurnInTest Professional from a CD or flash drive. - Updat
ed
the help link from the Windows Start, All Programs, BurnInTest menu for the browser bas
ed
help. - Correct
ed
a bug where Disk preferences display
ed
in the Preferences window would be incorrect when the system had no Floppy drive. - Correct
ed
a bug where the Advanc
ed
Network test might not have been display
ed
until after entering the Duty Cycle selection (ie. just chaning from the standard network test to the advanc
ed
test). - Correct
ed
a
USB
bug in Beta 5.2.1003 where the test would not run if there where there insufficient
USB
loopback plugs attach
ed
to the system. - Includ
ed
a new version of PassMark Rebooter that supports Windows Vista. Release 5.2 build 1004 - Public Pre-release WIN32 release 13 February 2007 - Updat
ed
the report
ed
Operating system for the various Vista product
ed
itions. - Disk test settings can be configur
ed
for "Automatically Select all Hard Disks", rather than using defaults. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipp
ed
as they are unavailable for testing. - Correct
ed
a bug where temperature information could be duplicat
ed
in the HTML report. - Correct
ed
a bug certain 'save report' warning messages could be truncat
ed
. - Help file updat
ed
. Release 5.2 build 1003 - BETA RELEASE ONLY WIN32 release 23 January 2007 - Chang
ed
the
USB
preferences and test to more completely check for the PassMark
USB
Loopback plugs and ignore any device that is not a PassMark
USB
Loopback plug (due to report
ed
incorrect
detect
ion with another hardware device). - Increas
ed
Trace level debugging for Intel temperature monitoring. - Correct
ed
a bug with the disk test introduc
ed
in 5.2.1001 Release 5.2 build 1002 - BETA RELEASE ONLY WIN32 release 22 January 2007 - Increas
ed
the number of disks that can be test
ed
from 20 to 26. - Updat
ed
BurnInTest to reflect that Temperature monitoring with Intel Desktop utilities is support
ed
. Intel Desktop utilities essentially is a replacement for Intel Active Monitor for newer Intel motherboards. - Increas
ed
Trace level debugging for Intel temperature monitoring. Release 5.2 build 1001 - BETA RELEASE ONLY WIN32 release 19 January 2007 - Windows Vista support. - The Block size us
ed
in the disk test is now configurable per disk. The default block size has been increas
ed
from 16KB to 32KB. - An option has been add
ed
to automatically
detect
all of the CD and DVD drives for the CD test (as per the disk test). This may be useful when testing across many systems with different optical drive configurations. - Increas
ed
Trace level debugging for Intel temperature monitoring. - Bugs correct
ed
: - Disk preferences - in rare cases invalid default values could be set for a disk, an invalid value error would occur and the values would ne
ed
to be manually correct
ed
. Release 5.2 build 1000 - limit
ed
release WIN32 release 8 January 2007 - Windows Vista support. - R
ed
uc
ed
the ne
ed
for elevat
ed
administrator privileges: - Chang
ed
the location of the disk test files from the root directory of the test volume to a BurnInTest data files subdirectory (e.g from "C:\" to "C:\BurnInTest test files\") - Mov
ed
many of the files from the Program Files directory to the User directory for Windows 2000, XP and Vista. When running BurnInTest on Windows 98, ME or from a key.dat file (e.g. from a
USB
drive with a licens
ed
key.dat) BurnInTest will store these files in the BurnInTest program directory. Specifically, the following files have been mov
ed
from the Program Files directory to the User Personal directory, e.g. Vista - "C:\Users\\Documents\PassMark\BurnInTest\" XP - "My Documents\PassMark\BurnInTest\" Files: Configuration file, Configuration load/save default directory, Save log file and image default directory, parallel port override "ioports.dat" directory, default command line script directory, log file directory, video file directory, Plugin directory, machine id file directory, Run as script default directory, CD burn image, Advanc
ed
network FTP temp files. - Replac
ed
the Help system with Browser bas
ed
help. - Chang
ed
the Disk test block size from 16KB to 256KB. It is plann
ed
to make this user configurable in the next build. Release 5.1 build 1014 WIN32 release 2 November 2006 WIN64 release 2 November 2006 - Correct
ed
a bug when running on Vista, where the Standard network test would report a checksum error when the transmitt
ed
data was correct. - Correct
ed
a bug where BurnInTest would not stop the tests bas
ed
on the number of test cycles for the Plugin test or the Advanc
ed
Network test. - Made the "Could not set
USB
2Test mode"
USB
error message more specific by adding an error for insufficient system resources. - Chang
ed
the preferences Window to fit on an 800x600 resolution screen. - Correct
ed
a minor bug in Activity level 2 trace logging with the 'hide duplicate' preference setting. - Correct
ed
a minor memory leak if the 2D test fail
ed
to initialize (such as due to a DirectX problem). - The Parallel port test may now be us
ed
on Windows Vista. Specifically, the PassMark device driver us
ed
for the parallel port test could not be load
ed
on 64-bit Windows Vista as it was not digitally sign
ed
. It is now digitally sign
ed
. Release 5.1 build 1013 revision 0002 WIN32 release 19 September 2006 WIN64 release 19 September 2006 - Correct
ed
an Access Violation problem report
ed
by a customer on a particular MB. Release 5.1 build 1013 WIN32 release 7 September 2006 WIN64 release 7 September 2006 - The "Notes" section has been add
ed
to the Customer results certificate. - Some additional configuration range validation has been add
ed
. Release 5.1 build 1012 WIN32 release 15 August 2006 - Correct
ed
a false report of a "Unable to get disk volume extent information" for the disk butterfly seek test. - Advanc
ed
Network test changes for errors: "Corrupt header - packet discard
ed
" and "Advanc
ed
Network test tim
ed
out" - Advanc
ed
Network test Endpoint changes for problems on non-English Operating Systems and systems with the Windows "Network Interface" performance statistics disabl
ed
. - SMART parameters on a Samsung Hard Disk caus
ed
BurnInTest to fail when running the disk test with SMART thresholds enabl
ed
. This has been correct
ed
. - The 2D scrolling H's test could display corrupt characters on the second and subsequent test run. This has been correct
ed
. - A problem with the Integer maths test where the results could display a negative number of operations has been resolv
ed
. - Minor improvements to the help file. - HTML help file add
ed
for Windows Vista and Longhorn Server. - Minor improvements to the Error Classification file (error descriptions). - Some CD Trace level 1 logging has been mov
ed
to trace level 2. - Trace level 1 logging has been add
ed
to the test closing software. - New build of Endpoint.exe (1.0 1010). Release 5.1 build 1011 WIN32 release 6 July 2006 - New Advanc
ed
Network test error reporting add
ed
in the previous build V5.1 1010 has been remov
ed
. - A broader range of
USB
2.0 Loopback plugs can now be us
ed
with BurnInTest. Release 5.1 build 1010 WIN32 release 4 July 2006 - Correct
ed
the HTML report description of the L2/L3 CPU cache when the L3 cache size could not be determin
ed
. Advanc
ed
network changes: - Endpoints ran at 100% CPU load as they contain
ed
no throttling. This impact
ed
their ability to effectively handle multiple threads handling TCP/UDP messaging. Throttling has been add
ed
to the EndPoint side to r
ed
uce CPU load. This does not greatly impact Network load. - Throttling on the BurnInTest side contain
ed
a sleep that was not insignificant. This could have impact
ed
the BurnInTest data test thread to to handle incoming TCP and particularly UDP messages. This sleep has been r
ed
uc
ed
and other throttling parameters chang
ed
to suit. (ie. smaller sleeps more often). - EndPoint systems with x NICs (where x > 1), report
ed
themselves as an Endpoint with x NICs, x times. Effectively registering with BurnInTest as x * x EndPoint NICS. This impact
ed
the effectiveness of the load distribution to EndPoint NICs. An Endpoint system now only registers the once with BurnInTest. - The BurnInTest side did not report data verification Checksum errors for full duplex testing. This error determination has been correct
ed
and reporting add
ed
. - The Test statistics sent from the Endpoint to BurnInTest could fail if the statistics block is split across 2 lower level TCP send packets. This could lead to problems like incorrect reporting of Endpoint determin
ed
checksum errors, Endpoint load and load balancing. Further it would lead to an Endpoint testthread being put into an endless TCP send loop. This would eventually bring the Endpoint system to its knees as more and more of these test threads go into this state. This has been correct
ed
. - The Data Receiv
ed
report
ed
by BurnInTest was double count
ed
. This has been correct
ed
. Release 5.1 build 1009 WIN32 release 23 June 2006 - Plugin test error classifications were incorrect in the log file detail
ed
description. - Corrections to the advanc
ed
network test (BurnInTest and EndPoint). Release 5.1 build 1008 - limit
ed
release WIN32 release 20 June 2006 - Advanc
ed
network changes corrections. Most notably, a bug where part of the payload data could be lost if the payload block (eg. 1000 bytes) was split across 2 (or more) lower level TCP packets. - Add
ed
version reporting for Endpoints. Release 5.1 build 1007 - limit
ed
release WIN32 release 16 June 2006 Advanc
ed
network changes: - Correct
ed
a BurnInTest access Violation introduc
ed
in V5.1 1006. - The Endpoint now reports its version and build to BurnInTest and BurnInTest reports this in the log file if it is an earlier version than expect
ed
. This is to help avoid the situation where old Endpoints are run on the Network, that may not be compatible with the version of BurnInTest being run by the user. - Remov
ed
a timeout report in a specific instance where a timeout is not an error. - Chang
ed
the Endpoint rebalancing and polling to occur less often after the test has been running 3 minutes. This is to help allowing the handling of polling from a larger number of multiple copies of BurnInTest on the Network. - Add
ed
a connection retries on failure for the Endpoint. - Correct
ed
a memory leak in the Endpoint. - Increas
ed
the number of sockets support
ed
. - Correct
ed
some Advanc
ed
Network error classifications. Release 5.1 build 1006 - limit
ed
release WIN32 release 14 June 2006 - Improvements to the Advanc
ed
Network test (both BurnInTest V5.1 1006 and EndPoint V1.0 1004) to remove corrupt
ed
false packet corruption errors. Improv
ed
the timeout recovery mechanism. Add
ed
some validation to the Windows Network performance data us
ed
for NIC utilization. - Changes to the collection of Disk drive information on startup to try to resolve a startup issue on Systems with a large number of physical drives and 'unusual' WMI namings. Release 5.1 build 1005 WIN32 release 2 June 2006 - Correct
ed
a bug in the Advanc
ed
network test where the test would not recover from timeout errors. The test appears to be running, but the results are 0 and the number of connect
ed
End Points are 0. Also improv
ed
the retry on timeout mechanism. - Remov
ed
some duplication in error reporting in the Advanc
ed
Network test. - Chang
ed
the Advanc
ed
Network display of Utilization to ensure a maximum of 100% display
ed
. - Correct
ed
an Advanc
ed
Network test bug where the number of Errors report
ed
in the test window would not take into account the corrupt packet threshold, and an error would be add
ed
for each occurrence of the corrupt packet (rather than when the user set threshold was reach
ed
). Release 5.1 build 1004b WIN32 release 25 May 2006 (not publicly releas
ed
) - Correct
ed
the default Advanc
ed
network corrupt packet threshold value. - Updat
ed
the data entry fields in the CD preferences when a different CD drive is select
ed
. - The Advanc
ed
Network specific log files should be concatenat
ed
for a script run. This was only occurring for the first NIC under test. The concatenation will now occur for each NIC under test, when run from a script. - Correct
ed
a bug where a log file name specifi
ed
with no directory path could be incorrect. - Correct
ed
a bug where the customer "Test Certificate" report incorrectly translat
ed
the "%" character from a customer specific HTML template. eg would be translat
ed
to . - The "Advanc
ed
Network test error" (215) has been remov
ed
and replac
ed
with other existing error messages 214, 219, 220, 221 or 222. - Add
ed
the Customer name and Technician name to the text and HTMl reports. Previously, this information was only includ
ed
in the "Test Certificate" report. - We have add
ed
a commandline option to specify the Serial port test data as a constant value. To specify specific data for the Serial port test you should specify e.g. "bit.exe /E 23" from the command line where 23 is in decimal and will be us
ed
for all test data (instead of random data). The vales should be between 0 and 255. Release 5.1 build 1004 WIN32 release 19 April 2006 (not publicly releas
ed
) - Add
ed
the COM port spe
ed
of 921600 Kbits/s for RS 422/RS485 testing. - Chang
ed
the CD test to ensure that the entire test CD data is not cach
ed
on systems with a large amount of RAM. - Add
ed
a -M command line option to display the Machine ID window automatically when BurninTest starts. - Chang
ed
the 2D EMC scrolling H's test to work on multiple monitors were the resolution on each is different. - Chang
ed
log files such the syntax "..\" could be us
ed
for files in the directory up a level. - Minor correction to the advanc
ed
network test. Release 5.1 build 1003 WIN32 release 18 April 2006 WIN64 release 18 April 2006 - Chang
ed
the Advanc
ed
network test to allow a corrupt packet threshold value up to 1 million. - Bundl
ed
a new version of rebooter. Release 5.1 build 1002 WIN32 release 11 April 2006 WIN64 release 11 April 2006 - Corrections to the translation of V4.0 to V5 configuration files. Note: Configuration files in V5.x builds prior to V5.1 1002 could become corrupt
ed
if a V4.0 configuration file is load
ed
. - Correct
ed
a bug where the main Window size and location were not restor
ed
on restarting BurnInTest. - Changes to the SMART attribute logging to support a greater range of Disk drive device drivers. Add
ed
additional Activity Level 2 trace logging. - Add
ed
an option to use CTS (Clear To Send) flow control in the loop back stage of the COM port test. - Correct
ed
a bug where the CPU L3 cache could be report
ed
as -1. - Help file updates. Release 5.1 build 1001 WIN32 release 30/March/2006 - Digitally sign
ed
the BurnInTest application to allow it to run under Windows Server "Longhorn". Note, previously only the installation package was digitally sign
ed
. - Updat
ed
the report
ed
Operating system descriptions, including: - Windows Vista - Windows Server "Longhorn" - Correct
ed
a bug where the Advanc
ed
network information was not display
ed
on the main window when it was run from a script. - The Advanc
ed
Network Corrupt threshold packet has been chang
ed
to produce an error every time the error is receiv
ed
after the threshold is reach
ed
. - Correct
ed
the reporting of "Network, Packet discard
ed
due to corrupt header" as a Network test error. - Correct
ed
a bug where a new log file was not creat
ed
if (only) the log prefix chang
ed
during the running of a script file. - Split the "Network, Advanc
ed
Network test error" error into 6 errors: "Network, Advanc
ed
Network test error" "Advanc
ed
Network Socket error" "Advanc
ed
Network Send error" "Advanc
ed
Network Send error - no data sent" "Advanc
ed
Network Receive error" "Advanc
ed
Network Receive error - no data receiv
ed
" Add
ed
either activity trace 1 or trace 2 logging for each of the errors, with additional information where available. - Add
ed
additional Serial port activity trace 2 logging. Including the logging of all transmit buffer data when the /B command line is us
ed
. Release 5.1 build 1000 WIN32 release 27/March/2006 (not a public release) Add
ed
the following features: - Create the log file directory specifi
ed
in the Logging Options if it does not exist. - Condense the Advanc
ed
Network Test log files to one log file per IP address per script run, when run from a script. - Add
ed
an option to summarize duplicate errors in the log file. - Color cod
ed
errors bas
ed
on severity in the Detail
ed
event log Window and the HTML log file. - Add
ed
an option to only create a log file when BurnIn actually runs a test as oppos
ed
to every time BurnIn is execut
ed
. - Add
ed
a warning if a test thread completes with 0 cycles and 0 operations. - In the results summary html file, insert
ed
more spacing between the 揘otes? and 揇etail
ed
Event Log? - Chang
ed
the Activity Trace file format to be the same as the log file, ie. text or HTML, rather than always text. - The 2D 揝crolling H抯?test will now display across multiple screens/displays ?i.e. all active displays. - A threshold has been add
ed
for the 揷orrupt header ?packet discard
ed
?event in the advanc
ed
network options so that a 揊ail?is not produc
ed
when that is the only thing that produces errors. - Add
ed
looping capability in scripting. LOOP n { ? } where n is the number of times to repeat the commands in the brackets. - Correct
ed
a bug where PASS could be display
ed
if the Advanc
ed
Network test was the only test running, but it fail
ed
. Release 5.0 build 1001 WIN32 release 9/March/2006 - Correct
ed
a bug where Network directory paths were not accept
ed
, eg. for the log file name and post test application file name. - The CPU maths test has been improv
ed
to better load up all CPU's. Previously BurnInTest start
ed
a maths test thread per physical CPU package. BurnInTest has been chang
ed
to start a maths test thread per CPU (= num. physical CPU packages x num. CPU cores x num. logical CPUs). - The CPU preferences have been chang
ed
to allow the CPU maths test to be lock
ed
to any CPU (ie. select a CPU from a list of CPU's where the number of CPU's = num. physical CPU packages x num. CPU cores x num. logical CPUs). - The Parallel and Serial port error message have been modifi
ed
in the case where a test plug may not have been connect
ed
to indicate that the user should check this. - Correct
ed
a bug where a licenc
ed
version could display the message "[limit
ed
evaluation version]" Release 5.0 build 1000 WIN32 release 24/February/2006 WIN64 release 24/February/2006 NEW TESTS & IMPROVEMENTS TO EXISTING TESTS BurnInTest Standard and Professional versions. - Add
ed
a customer style results certificate. This will save the log file in HTML format but from the perspective of a end customer. This report style can be tailor
ed
by the user (through changing an HTML template). - An MP3 playback test has been add
ed
to the Sound test. - A color printer test has been add
ed
. - A new post test option to allow the results to be print
ed
automatically at the end of a test has been add
ed
. - Add
ed
new Post-test action options of: - Optionally allow the user to "run an external program & exit" after BIT has been manually stopp
ed
. Modify the $RESULT variable to "PASS (manual abort)" or "FAIL (manual abort)" for this case. - Allow the results window to be display
ed
for all post test options (except Reboot). - Add
ed
new Pre-test actions to allow an external application to be run and have BIT wait for the application to exit. On continuing, BIT will run the subscript file (of scripting commands) if it has been creat
ed
. - Chang
ed
the manual Stop buttons, to abort the running of a script (rather than just the current test). BurnInTest Professional specific. - Add
ed
a "Plugin" test that allows users to develop their own BurnInTest test modules for specializ
ed
hardware. Three external plugins may be specifi
ed
at once. - A Modem test has been add
ed
to BurnInTest as a Plugin. PassMark's ModemTest Version V1.3 (latest build) is requir
ed
. - A KeyBoard Test has been add
ed
to BurnInTest as a Plugin. PassMark's KeyboardTest Version V2.2 (latest build) is requir
ed
. - A Firewire Test has been add
ed
to BurnInTest as a Plugin. PassMark's free Firewire plugin is requir
ed
and a "Kanguru FireFlash" drive is requir
ed
. - A new advanc
ed
network test has been add
ed
. BurnInTest Professional only. - The Memory test now allows the user to specify the type of test pattern to be us
ed
. - Testing with the
USB
2.0 Loopback plug has been improv
ed
. When us
ed
with
USB
2.0 Loopback device driver V2.0.1002, error details will now be report
ed
for: CRC error report
ed
by
USB
Host controller BIT STUFF error report
ed
by
USB
Host controller DATA TOGGLE MISMATCH error report
ed
by
USB
Host controller STALL PID error report
ed
by
USB
Host controller DEVICE NOT RESPONDING error report
ed
by
USB
Host controller PID CHECK FAILURE error report
ed
by
USB
Host controller UNEXPECT
ED
PID error report
ed
by
USB
Host controller DATA OVERRUN error report
ed
by
USB
Host controller DATA UNDERRUN error report
ed
by
USB
Host controller BUFFER OVERRUN error report
ed
by
USB
Host controller BUFFER UNDERRUN error report
ed
by
USB
Host controller NOT ACCESS
ED
error report
ed
by
USB
Host controller FIFO error report
ed
by
USB
Host controller TRANSACTION (XACT) ERROR report
ed
by
USB
Host controller
BABBLE
DETECT
ED
error report
ed
by
USB
Host controller DATA BUFFER ERROR report
ed
by
USB
Host controller In the case of these errors, BurnInTest will re-attempt the operation. The user can set the Error reporting to be skipp
ed
for the initial recovery attempt. IMPROVEMENTS TO TESTING FACILITIES - Add
ed
a disk autoconfig, such that when tests are start
ed
, the disk drives and settings will be defaults to all disks (exc. CD/DVD). This may be useful when testing multiple systems with different hard disk drive letters. - Store the position of the Main window on exiting BurnInTest. On starting BurnInTest, position the main window as sav
ed
; on starting tests, position the test windows as sav
ed
. - Allow a "drag & drop" of the Configuration file directly on the BurnInTest program icon. - Allow testing 99.5% to 100% of disk, instead of 94%, for disks that do not contain the Windows directory and do not contain a swap file. - Add
ed
the ability to log interim results, which may be useful for unstable systems. - AMD and Intel Dual core reporting add
ed
. - New L2 CPU cache sizes add
ed
to reports. - CPU support for SSE3, DEP and PAE add
ed
to reports. - Shortcut of "F1" for contextual help add
ed
to all Windows. - Improve the flexibility in specifying the EXECUTEWAIT scripting command for sleeper. - Updat
ed
logging header information with the hard and optical drive model. - The 2D and 3D tests have been updat
ed
to use DirectX 9.0c. - User interface updat
ed
. - The HTML report format has been improv
ed
. - The BurnInTest configuration file extension has been renam
ed
from .cfg to use .bitcfg, to ensure the configuration file is associat
ed
with BurnInTest. - An error message indicating that accumulat
ed
log files are not support
ed
when run from CD or DVD has been add
ed
. - To allow smaller test files with very large disks, the minimum disk test file size has been r
ed
uc
ed
from 0.1% to 0.01% of the disk space. - Log events were previously shown as "INFORMATION" if they were low level errors, or simply additional information (not errors). "INFORMATION" now refers to a low level error, and "LOG NOTE" now refers to additional information (that is not in the error count). - Improv
ed
the specific detail of the Serial Port errors
detect
ed
. BurnInTest now reports framing errors, buffer overrun errors, input buffer overflow errors, parity errors and Transmit buffer full errors as specific error messages (rather than a broader error description). - Add
ed
the /k command line so the user can specify not to delete HDD test files if an error occurs. - Increas
ed
Activity trace level 1 error logging for Serial port testing. - Increas
ed
Activity trace level 1 error logging for Hyper threading
detect
ion. - Bundl
ed
a new version of the Rebooter program. - Improv
ed
the Serial port error logging (displaying baud rate) and increas
ed
Activity trace level 1 error logging (displaying erroneous data). - Modifi
ed
the Window sizes to help improve navigation on smaller displays (i.e. 640x480). - The CPU load for the Standard and Torture RAM tests has been made more linear with the duty cycle setting. Note: This means that compar
ed
to the previous build of BurnInTest, less RAM test operations will be run per second (when the duty cycle is less than 100). - Additional debug code and very minor changes in the Loopback sound test. - The Post test option of "Run external application and exit" has been modifi
ed
such that if no external file is specifi
ed
, this Post test option will just exit BurnInTest. - Allow
ed
the full range of PassMark
USB
1 loopback plugs to be us
ed
with BurnInTest Professional. - Add
ed
additional Activity Trace level 2 logging. - The delay insert
ed
between packets in the
USB
2 test, when the duty cycle is less than 50, has been chang
ed
from at least 1ms to at least 1ms to 50ms (for a Duty Cycle of 49 down to 0). - The subscript commands to configure BurnInTest from an external application (i.e. specifi
ed
in the bit-script-input.txt file and run by specifying either a pre-test or EXECUTEWAIT application) has been chang
ed
to allow "LOAD" commands (in addition to "SET" scripting commands). - Renam
ed
the "Error" log to "Event" log. - Chang
ed
the order of the items in an Event log line, such that the Severity is the first item. - The EXECUTEWAIT script command has been modifi
ed
such that the external application may provide an input script file (of SET... commands) to be run after the EXECUTEWAIT application closes. This allows external applications to define test environment parameters (such as the serial number and machine type). - Add
ed
scripting commands: SETSERIAL "1234-shdfgdhs-GHGHG" SETMACHINETYPE "HP XPS800" SETNOTES "Test notes defin
ed
by the external application." SETLOG "\Program Files\Plugin\plugin_log" SETPLUGIN "\Program Files\Plugin\plugin.exe" - Add
ed
POST TEST application parameter substitution to allow values to be pass
ed
to an external application at the end of a test. These are: $RESULT - "PASS" or "FAIL" will be substitut
ed
. $SERIAL - The serial number will be substitut
ed
. $MACHINETYPE - The machine type will be substitut
ed
. $NOTES - The notes will be substitut
ed
. - Add
ed
extra logging for memory allocation errors in the disk test - Add
ed
"log bad sector increase" and "bad sector threshold" options to disk test. This result
ed
in a change to the configuration file format and requir
ed
additional code to automatically convert from old formats. - Modifi
ed
the user interface in the preferences window for the disk test and the CD test - Improv
ed
the handling of
USB
2.0 loopback plugs recovery from sleep states. BUG CORRECTIONS - Correct
ed
a bug where the System and Application events logg
ed
in the BurnInTest Trace logs were wrong if the event log had reach
ed
its maximum size. - Checks that the Sound test files (WAV and MIDI) exist have been add
ed
. - The continuous auto updating of the
USB
image (
USB
Loopback plug vs.
USB
2.0 Loopback plug) on the main window has been remov
ed
. This is now updat
ed
on BIT startup, selecting Refresh in
USB
preferences or on starting a test. If there is a serious
USB
problem, this (together with the
USB
2.0 Loopback device driver, V2.0.1002) will avoid the possibility of BurnInTest locking up. - Correct
ed
a bug with the Butterfly seek mode of the Disk test. This was found to occur with FAT32 disks where the Cylinder size was relatively small and the Sector size relatively large. - Reset Defaults on the Configuration Page now resets the Auto Stop Value. - Reset Defaults on the Configuration Page now resets the color indicators. - The CD test has been modifi
ed
to skip invalid files either with "?"'s , to avoid reporting errors that are due to the CD test m
ed
ia filenames. - The Network test results window scroll bar has been correct
ed
. - The Memory torture test could fail on some systems with a small amount of RAM and relatively high memory fragmentation. This has been correct
ed
. - Scripting correction for .cmd files. - Correct
ed
a bug that caus
ed
problems when running the disk test with SMART monitoring turn
ed
on. This problem only occurs on a small number of HDD's. - Correct
ed
memory leaks - On occasion, the measur
ed
waveform from the loopback sound test may have been slightly alter
ed
on starting or stopping all tests, possibly enough to trigger an error. This has been resolv
ed
. - If an error occurr
ed
in the final second of a test, the error may have been logg
ed
but not includ
ed
in the big PASS/FAIL results window. This has been correct
ed
. - After running a script file that load
ed
a configuration file, that had a full path specifi
ed
, the Save and Load configuration menu options no longer work
ed
. This has been correct
ed
. - Previously, the Version of BurnInTest was only written in the First log file after starting BurnInTest. This log line is now written in all log files. - For
USB
2 tests that have read or write failures, the Windows error codes are now includ
ed
in the level 2 Activity trace log. - Command line parameters may now be pass
ed
to a PreTest application. - Log files may now use a single static filename. This may be useful when the log file is to be pars
ed
by an external program. - Correct
ed
a bug where the Plugin test would stop prematurely. - Correct
ed
the specification of the Scripting EXECUTEWAIT filename. - Chang
ed
Script processing such that a script is abort
ed
if a scripting error is encounter
ed
and Stop on error is select
ed
. - Add
ed
an indication on the main window that a script is currently running ("Script currently running"). - Correct
ed
the serial port test to identify non-existing plugs when the Disable RTS/CTS and DSR/DTR testing has been select
ed
. - Correct
ed
the display of strange results (666666) report
ed
by a user, relat
ed
to copy protection. - Fix
ed
a memory leak bug in the MBM interface which caus
ed
memory allocation errors. - Add
ed
BIT version number to the ASCII log file. - Fix
ed
a bug with the 3D Test that was causing it to stop before the autostop timer period - Chang
ed
an error in the tape drive test to a warning if tape drive doesn't support setting drive parameters. History of earlier releases: Please see http://passmark.com/products/bit_history.htm Documentation ============= All the documentation is includ
ed
in the help file. It can be access
ed
from the help menu. There is also a PDF format Users guide available for download from the PassMark web site. Support ======= For technical support, questions, suggestions, please check the help file for our email address or visit our web page at http://www.passmark.com Ordering / Registration ======================= All the details are in the help file documentation or you can visit our sales information page http://www.passmark.com/sales Compatibility issues with the Network & Parallel Port Tests =========================================================== If you are running Windows 2000 or XP, you ne
ed
to have administrator privileges to run this test. Enjoy.. The PassMark Development team
移植st官方
usb
-hid程序出现
babble
detect
ed
错误
我在移植st官方的
usb
-hid程序是可以运行的,但是当我修改最大包时出现了
babble
detect
ed
错误,按照网上的操作,修改最大缓冲区需要修改3个地方,(1)
usb
_desc.c文件中的CustomHID_ConfigDescriptor[CUSTOMHID_SIZ_CONFIG_DESC]数组,修改端点1的输入输出的最大包大小;(2)修改
usb
_prop.c文件中的void Custom
开发U3V时遇到bus hound报
babble
detect
错误
先上个bus hound的截图。 项目内容是开发一款符合u3v协议的工业相机。 按照协议,我应该发送一帧3424256byte长度的包,然后发送一帧1024byte的第二帧。 从bus hound上看,看起来是没问题的,4号endpoint先传了3424256字节,然后是1024字节。 但是,这个1024字节的下面总是提示
babble
detect
ed
! 字面意思是:检测到胡言乱语,...
USB
mass storage协议
这一节主要把在实现“Linux模拟U盘功能”过程中的一些调试过程记录下来,并加以解析。 一、背景知识 1、
USB
Mass Storage类规范概述
USB
组织在universal Serial Bus Mass Storage Class Spaceification 1.1版本中定义了海量存储设备类(Mass Storage Class)的规范,这个类规范
一般软件使用
4,164
社区成员
38,513
社区内容
发帖
与我相关
我的任务
一般软件使用
Windows专区 一般软件使用
复制链接
扫一扫
分享
社区描述
Windows专区 一般软件使用
社区管理员
加入社区
获取链接或二维码
近7日
近30日
至今
加载中
查看更多榜单
社区公告
暂无公告
试试用AI创作助手写篇文章吧
+ 用AI写文章