OK6410开发板上,无线网卡WIFI联不上?
是这样的,我有一块OK6410的开发板,无线网卡WIFI联不上?参数如下
O S: 2.6.28.6内核
板 型: ok 6410A
wifi网卡: 磊科(Netcore)NW336 150M无线USB网卡
交叉编译工具: arm-linux-gcc 4.2.2
网卡驱动程序:RTL8192CU_8188CUS_8188CE-VAU_linux_v2.0.1406.20110309.zip
-------------------------------------------------------------------------
现在已经成功加载了网卡驱动模块。当插入网卡时,
-------------------------------------------------------------------------
可以搜索到路由器:
[root@OK6410 rt336]# iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
survey done event(0xf)
wlan0 Scan completed :
Cell 01 - Address: E0:05:C5:B2:40:68
ESSID:"B068"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.427 GHz (Channel 4)
Encryption key:on
Bit Rates:300 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Authentication Suites (1) : PSK
Cell 02 - Address: 00:25:12:9C:5C:D4
ESSID:"firelion"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:54 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=23/100 Signal level=23/100
Cell 03 - Address: 1C:BD:B9:92:C8:98
ESSID:"admin"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:300 Mb/s
IE: Unknown: DD0E0050F204104A0001101044000102
Quality=26/100 Signal level=26/100
--------------------------------------------------------------------------------------
问题出在下面
--------------------------------------------------------------------------------------
[root@OK6410 rt336]# iwconfig wlan0 essid "B068"
=>rtw_wx_set_essid
ssid=B24068, len=6
#### dst_ssid=(B24068) Opt_Ant_(B) , cur_Ant(B)
link to Artheros AP
<=rtw_wx_set_essid
rtl8192c_join_cmd_hdl cur_ant(0),opt_ant(0)
[root@OK6410 rt336]# link to Artheros AP
issue_auth auth_algo= OPEN auth_seq=1
==>issue_auth ,auth_algm(0x00)
==> issue_auth set auth_seq_num(1)
OnAuthClient
OnAssocRsp
report_join_res(2)
rtw_joinbss_event_callback...call rtw_indicate_connect...
+rtw_indicate_wx_assoc_event
HTOnAssocRsp
update raid entry, init_rate=0x3, mask=0xf, arg=0x84
update raid entry, init_rate=0x53, mask=0xfffff, arg=0xa0
=>mlmeext_joinbss_event_callback
issue nulldata to keep alive
issue_nulldata:0
issue nulldata to keep alive //就一直重复这里,不知道问题出在哪里了,请各位帮我看看怎么解决这个问题issue_nulldata:0
issue nulldata to keep alive
issue_nulldata:0
issue nulldata to keep alive
issue_nulldata:0