LINUX下限制摄像头buffer大小的原因

鲤鱼 2012-06-11 11:20:19

同一个UVC摄像头
在电脑上Fedoral中使用dmesg，可以看到摄像头的buffer大小是614400（640*480*2）
在mini6410开发板上使用dmesg,可以看到摄像头的buffer大小是153600（320*240*2）

想问一下，可能是哪些原因限制了摄像头buffer在开发板上是153600，而不是614400？？？？

...全文

142 4 打赏收藏转发到动态举报

写回复

4 条回复

切换为时间正序

请发表友善的回复…

发表回复

鲤鱼 2012-06-13

打赏
举报

回复

[Quote=引用 3 楼的回复:]
摄像头的驱动程序里面有关于限制图片大小的内容，可以找到驱动看一看
[/Quote]

是应该看USB的驱动呢？还是UVCVideo的驱动呢？

tracyjk 2012-06-13

打赏
举报

回复

摄像头的驱动程序里面有关于限制图片大小的内容，可以找到驱动看一看

鲤鱼 2012-06-11

打赏
举报

回复

开发板的内存是256M的，另外我还有一个摄像头在电脑上还是在开发板上都是614400，所以这个问题比较郁闷

louyong0571 2012-06-11

打赏
举报

回复

开发板的内存本来就小吧。

20160630全志R8点亮ov7670.txt 开发板：杭州若格科技，全志R8（Cortex A8） android4.2.2/linux3.4.39 2016/6/30 15:17 1、配置ov7670在android层配置的分辨率为vga（预览/拍照/录像） R:\wyb\ov7670_ruoge_kerun_r8\android\device\softwinner\nuclear-evb\camera.cfg ;------------------------------------------------------------------------------- ; 用于camera的配置 ; ; 采用格式: ; key = key_value ; 注意: 每个key需要顶格写; ; key_value紧跟着key后面的等号后面, 位于同一行中; ; key_value限制大小为256字节以内; ; ;------------------------------------------------------------------------------- ;------------------------------------------------------------------------------- ; 1 for single camera, 2 for double camera ;------------------------------------------------------------------------------- number_of_camera = 1 ;------------------------------------------------------------------------------- ; CAMERA_FACING_BACK ; gc0308 ;------------------------------------------------------------------------------- camera_id = 0 ;------------------------------------------------------------------------------- ; 1 for CAMERA_FACING_FRONT ; 0 for CAMERA_FACING_BACK ;------------------------------------------------------------------------------- camera_facing = 0 ;------------------------------------------------------------------------------- ; camera orientation (0, 90, 180, 270) ;------------------------------------------------------------------------------- camera_orientation = 0 ;------------------------------------------------------------------------------- ; driver device name ;------------------------------------------------------------------------------- camera_device = /dev/video0 ;------------------------------------------------------------------------------- ; device id ; for two camera devices with one CSI ;------------------------------------------------------------------------------- device_id = 0 used_preview_size = 1 key_support_preview_size = 640x480 key_default_preview_size = 640x480 used_picture_size = 1 key_support_picture_size = 640x480

索智R16点亮ov2640.txt 开发板：深圳市索智科技有限公司SC3817R开发板，全志R16（CPU：Quad-Core Cortex-A7 CPU）全志官网R16的简介 android4.4.2/linux3.4.39 2016/7/18 16:38 1、配置ov2640在android层配置的分辨率为vga（预览/拍照/录像）注意：系统自带的快拍APP就在这里查找分辨率参数发送到camera的HAL层。这里得分辨率设置为：1280x720 驱动里面搜索可以设置为：1600x1200, 1280x960, 1024x768, 1280x720, 800x600（出错）, 640x480 R:\wyb\test_ov2640_r16\android\device\softwinner\astar-evb20\configs\camera.cfg ;------------------------------------------------------------------------------- ; 用于camera的配置 ; ; 采用格式: ; key = key_value ; 注意: 每个key需要顶格写; ; key_value紧跟着key后面的等号后面, 位于同一行中; ; key_value限制大小为256字节以内; ; ;------------------------------------------------------------------------------- ;------------------------------------------------------------------------------- ; exif information of "make" and "model" ;------------------------------------------------------------------------------- key_camera_exif_make = MAKE_A31S key_camera_exif_model = MODEL_A31ST ;------------------------------------------------------------------------------- ; 1 for single camera, 2 for double camera ;------------------------------------------------------------------------------- number_of_camera = 1 ;------------------------------------------------------------------------------- ; CAMERA_FACING_BACK ; gc0307 ov2640 ;------------------------------------------------------------------------------- camera_id = 0 ;------------------------------------------------------------------------------- ; 1 for CAMERA_FACING_FRONT ; 0 for CAMERA_FACING_BACK ;------------------------------------------------------------------------------- camera_facing = 0 ;------------------------------------------------------------------------------- ; 1 for camera without isp(using built-in isp of Axx) ; 0 for camera with isp ;------------------------------------------------------------------------------- use_builtin_isp = 0 ;------------------------------------------------------------------------------- ; camera orientation (0, 90, 180, 270) ;------------------------------------------------------------------------------- camera_orientation = 90 ;------------------------------------------------------------------------------- ; driver device name ;------------------------------------------------------------------------------- camera_device = /dev/video0 ;------------------------------------------------------------------------------- ; device id ; for two camera devices with one CSI ;------------------------------------------------------------------------------- device_id = 0 used_preview_size = 1 key_support_preview_size = 1600x1200, 1280x960, 1024x768, 1280x720, 800x600, 640x480 key_default_preview_size = 1280x720 used_picture_size = 1 key_support_picture_size = 1600x1200, 1280x960, 1024x768, 1280x720, 800x600, 640x480 key_default_picture_size = 1600x1200 used_flash_mode = 0 key_support_flash_mode = on,off,auto key_default_flash_mode = on used_color_effect=0 key_support_color_effect = none,mono,negative,sepia,aqua key_default_color_effect = none used_frame_rate = 1 key_support_frame_rate = 10 key_default_frame_rate = 10 used_focus_mode = 0 key_support_focus_mode = auto,infinity,macro,fixed,continuous-video,continuous-picture key_default_focus_mode = auto used_scene_mode = 0 key_support_scene_mode = auto,portrait,landscape,night,night-portrait,theatre,beach,snow,sunset,steadyphoto,fireworks,sports,party,candlelight,barcode key_default_scene_mode = auto used_white_balance = 0 key_support_white_balance = auto,incandescent,fluorescent,warm-fluorescent,daylight,cloudy-daylight key_default_white_balance = auto used_exposure_compensation = 1 key_max_exposure_compensation = 3 key_min_exposure_compensation = -3 key_step_exposure_compensation = 1 key_default_exposure_compensation = 0 2、没有/dev/video1，只有/dev/video0 R:\wyb\test_ov2640_r16\android\device\softwinner\astar-evb20\ueventd.sun8i.rc /dev/video0 0666 media media #/dev/video1 0666 media media 3、在init.rc（init.sun8i.rc）中加载ov2640.ko这个驱动模块。 R:\wyb\test_ov2640_r16\android\device\softwinner\astar-evb20\init.sun8i.rc #csi module insmod /system/vendor/modules/videobuf-core.ko insmod /system/vendor/modules/videobuf-dma-contig.ko insmod /system/vendor/modules/cam_detect.ko #insmod /system/vendor/modules/actuator.ko #insmod /system/vendor/modules/ad5820_act.ko insmod /system/vendor/modules/cci.ko insmod /system/vendor/modules/vfe_os.ko insmod /system/vendor/modules/vfe_subdev.ko #insmod /system/vendor/modules/gc0307.ko #insmod /system/vendor/modules/ov2035.ko insmod /system/vendor/modules/ov2640.ko insmod /system/vendor/modules/vfe_v4l2.ko 启动之后实际加载的摄像头的驱动模块： shell@astar-evb20:/ $ lsmod gt82x 9849 0 - Live 0x00000000 bma250 7848 0 - Live 0x00000000 sunxi_schw 12559 0 - Live 0x00000000 (O) rtl8150 9023 0 - Live 0x00000000 sunxi_keyboard 3021 0 - Live 0x00000000 sw_device 13916 0 - Live 0x00000000 vfe_v4l2 445444 0 - Live 0x00000000 ov2640 11637 0 - Live 0x00000000 vfe_subdev 4523 2 vfe_v4l2,ov2640, Live 0x00000000 vfe_os 3951 2 vfe_v4l2,vfe_subdev, Live 0x00000000 cci 21775 2 vfe_v4l2,ov2640, Live 0x00000000 videobuf_dma_contig 5567 1 vfe_v4l2, Live 0x00000000 videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000 bcm_btlpm 7442 0 - Live 0x00000000 bcmdhd 629907 0 - Live 0x00000000 mali 209490 25 - Live 0x00000000 (O) lcd 41263 0 - Live 0x00000000 disp 992816 8 mali,lcd, Live 0x00000000 nand 282774 0 - Live 0x00000000 (O) shell@astar-evb20:/ $ 4、驱动程序：ov2640.c及其V4L2的适配层。配置ov2640.c的编译选项，只需要修改device目录中的Makefile打开ov2640即可： R:\wyb\test_ov2640_r16\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\ov2640.c R:\wyb\test_ov2640_r16\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\Makefile obj-m += ov2640.o R:\wyb\test_ov2640_r16\lichee\linux-3.4\drivers\media\video\sunxi-vfe\Kconfig R:\wyb\test_ov2640_r16\lichee\linux-3.4\drivers\media\video\sunxi-vfe\Makefile 5、 R:\wyb\test_ov2640_r16\lichee\tools\pack\chips\sun8iw5p1\configs\evb-20\sys_config.fex ;-------------------------------------------------------------------------------- ;vip (video input port) configuration ;vip_used: 0:disable 1:enable ;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer ;vip_dev_qty: The quantity of devices linked to capture bus ; ;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and ; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured! ; ;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,vip_dev(x)_pos must be configured! ; ;vip_dev(x)_isp_used 0:not use isp 1:use isp ;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb ;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby ;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable ;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable ;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply ;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply ;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply ;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply ;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply ;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply ;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply ;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply ;x indicates the index of the devices which are linked to the same capture bus ;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000 ;fill handle string as below: ;axp22_eldo3 ;axp22_dldo4 ;axp22_eldo2 ;fill handle string "" when not using any pmu power supply ;-------------------------------------------------------------------------------- [csi0] vip_used = 1 vip_mode = 0 vip_dev_qty = 1 vip_define_sensor_list = 0 vip_csi_pck = port:PE00 vip_csi_mck = port:PE01 vip_csi_hsync = port:PE02 vip_csi_vsync = port:PE03 vip_csi_d0 = port:PE04 vip_csi_d1 = port:PE05 vip_csi_d2 = port:PE06 vip_csi_d3 = port:PE07 vip_csi_d4 = port:PE08 vip_csi_d5 = port:PE09 vip_csi_d6 = port:PE10 vip_csi_d7 = port:PE11 vip_csi_sck = port:PE12 vip_csi_sda = port:PE13 ;vip_dev0_mname = "ov5640" vip_dev0_mname = "ov2640" vip_dev0_pos = "rear" vip_dev0_lane = 1 vip_dev0_twi_id = 2 ;vip_dev0_twi_addr = 0x78 vip_dev0_twi_addr = 0x60 vip_dev0_isp_used = 0 vip_dev0_fmt = 0 vip_dev0_stby_mode = 0 vip_dev0_vflip = 0 vip_dev0_hflip = 0 vip_dev0_iovdd = "axp22_dldo3" vip_dev0_iovdd_vol = 3300000 vip_dev0_avdd = "" vip_dev0_avdd_vol = 3300000 vip_dev0_dvdd = "" vip_dev0_dvdd_vol = 1800000 vip_dev0_afvdd = "" vip_dev0_afvdd_vol = 3300000 vip_dev0_power_en = vip_dev0_reset = port:PE14 vip_dev0_pwdn = port:PE15 vip_dev0_flash_en = vip_dev0_flash_mode = vip_dev0_af_pwdn = 6、开发板上摄像头的I2C挂载在TWI2上面了，逻辑是需要打开的（但是不打开也能够用，很奇怪！）： ;---------------------------------------------------------------------------------- ;i2c configuration ; twi_used = twix enable ;---------------------------------------------------------------------------------- [twi0] twi_used = 1 twi_scl = port:PH02 twi_sda = port:PH03 [twi1] twi_used = 1 twi_scl = port:PH04 twi_sda = port:PH05 [twi2] twi_used = 0 twi_scl = port:PE12 twi_sda = port:PE13 直接配置摄像头的I2C了： vip_csi_sck = port:PE12 vip_csi_sda = port:PE13 不过奇怪的是，摄像头并没有向其它平台那样生成这个设备节点： /sys/class/i2c-adapter/i2c-2/2-0030 shell@octopus-f1:/ $ shell@octopus-f1:/ $ cd /sys/class/i2c-adapter/i2c-2/ shell@octopus-f1:/sys/class/i2c-adapter/i2c-2 $ shell@octopus-f1:/sys/class/i2c-adapter/i2c-2 $ ll drwxr-xr-x root root 1970-01-02 08:06 2-003b --w------- root root 4096 1970-01-02 08:06 delete_device lrwxrwxrwx root root 1970-01-02 08:06 device -> ../../twi.2 -r--r--r-- root root 4096 1970-01-02 08:06 name --w------- root root 4096 1970-01-02 08:06 new_device drwxr-xr-x root root 1970-01-02 08:06 power lrwxrwxrwx root root 1970-01-02 08:06 subsystem -> ../../../../bus/i2c -rw-r--r-- root root 4096 1970-01-02 08:06 uevent shell@octopus-f1:/sys/class/i2c-adapter/i2c-2 $ 可能是ov2640的驱动程序不完整，没有通过i2c_detect来注册2-0030这个节点。直接在驱动程序中读取I2C，还是对的。device ID = 0x2642。 7、奇葩的问题： 摄像头使用的是： http://www.waveshare.net/shop/OV2640-Camera-Board.htm OV2640 Camera Board vsync=15HZ，XCLK=24MHZ。href/pclk都有 camera打开摄像头是绿色屏幕（VGA分辨率），但是右上角貌似出来一点点图像。后来使用示波器的探头挂在vsync之后，图像正常。由于开发板和摄像头模组ov2640是飞线链接，硬件另外接了一个地，然后用纸胶布将地线和vsync捆绑在在一起，解决问题。刚开始摄像头的3.3V电源使用的是g-sensor的（VCC-3V0），看见图像出现竖条纹（电源纹波干扰），接回来（VCC-3V0-CSI）就正常了。

本课程主要介绍了如何创建Buffer对象，获取缓冲区长度，toString方法、write方法、StringDecoder对象、Buffer对象与数值之间的转换以及其他一些常用方法的使用。

ruoge_kerun_r8_ov2643显示为VGA_20160630_1613.7z 20160630全志R8点亮ov2643.txt 开发板：杭州若格科技，全志R8（Cortex A8） android4.2.2/linux3.4.39 2016/6/30 15:06 1、配置ov2643在android层配置的分辨率为vga（预览/拍照/录像） R:\wyb\ruoge_kerun_r8_ov2643\android\device\softwinner\nuclear-evb\camera.cfg ;------------------------------------------------------------------------------- ; 用于camera的配置 ; ; 采用格式: ; key = key_value ; 注意: 每个key需要顶格写; ; key_value紧跟着key后面的等号后面, 位于同一行中; ; key_value限制大小为256字节以内; ; ;------------------------------------------------------------------------------- ;------------------------------------------------------------------------------- ; 1 for single camera, 2 for double camera ;------------------------------------------------------------------------------- number_of_camera = 1 ;------------------------------------------------------------------------------- ; CAMERA_FACING_BACK ; gc0308 ;------------------------------------------------------------------------------- camera_id = 0 ;------------------------------------------------------------------------------- ; 1 for CAMERA_FACING_FRONT ; 0 for CAMERA_FACING_BACK ;------------------------------------------------------------------------------- camera_facing = 0 ;------------------------------------------------------------------------------- ; camera orientation (0, 90, 180, 270) ;------------------------------------------------------------------------------- camera_orientation = 0 ;------------------------------------------------------------------------------- ; driver device name ;------------------------------------------------------------------------------- camera_device = /dev/video0 ;------------------------------------------------------------------------------- ; device id ; for two camera devices with one CSI ;------------------------------------------------------------------------------- device_id = 0 used_preview_size = 1 key_support_preview_size = 640x480 key_default_preview_size = 640x480 used_picture_size = 1 key_support_picture_size = 640x480 key_default_picture_size = 640x480 used_flash_mode = 0 key_support_flash_mode = on,off,auto key_default_flash_mode = on used_color_effect=1 key_support_color_effect = none,mono,negative,sepia,aqua key_default_color_effect = none used_frame_rate = 1 key_support_frame_rate = 25 key_default_frame_rate = 25 used_focus_mode = 0 key_support_focus_mode = auto,infinity,macro,fixed key_default_focus_mode = auto used_scene_mode = 0 key_support_scene_mode = auto,auto,portrait,landscape,night,night-portrait,theatre,beach,snow,sunset,steadyphoto,fireworks,sports,party,candlelight,barcode key_default_scene_mode = auto used_white_balance = 1 key_support_white_balance = auto,incandescent,fluorescent,warm-fluorescent,daylight,cloudy-daylight key_default_white_balance = auto used_exposure_compensation = 1 key_max_exposure_compensation = 3 key_min_exposure_compensation = -3 key_step_exposure_compensation = 1 key_default_exposure_compensation = 0 ; only for facing back camera in android2.3, should be set in android4.0 used_zoom = 1 key_zoom_supported = true key_smooth_zoom_supported = false key_zoom_ratios = 100,120,150,200,230,250,300 key_max_zoom = 30 key_default_zoom = 0 2、在init.rc（init.sun5i.rc）中加载ov2643.ko这个驱动模块。 R:\wyb\ruoge_kerun_r8_ov2643\android\device\softwinner\nuclear-evb\init.sun5i.rc #csi module insmod /system/vendor/modules/videobuf-core.ko insmod /system/vendor/modules/videobuf-dma-contig.ko insmod /system/vendor/modules/camera.ko #insmod_modules camera #insmod /system/vendor/modules/gc0308.ko #insmod /system/vendor/modules/ov2640.ko insmod /system/vendor/modules/ov2643.ko #insmod /system/vendor/modules/ov7670.ko insmod /system/vendor/modules/sun5i_csi0.ko 3、摄像头ov2643在驱动中的配置：配置ov2643.c的编译选项，默认已经配置好，不用修改： R:\wyb\ruoge_kerun_r8_ov2643\lichee\linux-3.4\drivers\media\video\sun5i_csi\device\ov2643.c R:\wyb\ruoge_kerun_r8_ov2643\lichee\linux-3.4\drivers\media\video\sun5i_csi\Kconfig config CSI_OV2643 tristate "OmniVision OV2643 2M sensor support" default m depends on I2C && VIDEO_V4L2 select CSI_DEV_SEL_SUN5I ---help--- This is a Video4Linux2 sensor-level driver for the OmniVision OV2643 2M camera. R:\wyb\ruoge_kerun_r8_ov2643\lichee\linux-3.4\drivers\media\video\sun5i_csi\device\Makefile obj-$(CONFIG_CSI_OV2643) += ov2643.o R:\wyb\ruoge_kerun_r8_ov2643\lichee\linux-3.4\drivers\media\video\sun5i_csi\camera_detector\camera_list.c #define __OV2643__ 4、不同的电脑之间的SVN配置的问题： R:\wyb\vga_ov5640_ruoge_kerun_r8\lichee\linux-3.4\modules\mali\DX910-SW-99002-r3p2-01rel3\driver\src\devicedrv\ump\Kbuild # Get subversion revision number, fall back to 0000 if no svn info is available # SVN_REV := $(shell ((svnversion | grep -qv exported && echo -n 'Revision: ' && svnversion) || git svn info | sed -e 's/$$$$/M/' | grep '^Revision: ' || echo ${MALI_RELEASE_NAME}) 2>/dev/null | sed -e 's/^Revision: //') SVN_REV := 1 R:\wyb\vga_ov5640_ruoge_kerun_r8\lichee\linux-3.4\modules\mali\DX910-SW-99002-r3p2-01rel3\driver\src\devicedrv\ump\Makefile.common # Get subversion revision number, fall back to 0000 if no svn info is available # SVN_REV:=$(shell ((svnversion | grep -qv exported && echo -n 'Revision: ' && svnversion) || git svn info | sed -e 's/$$$$/M/' | grep '^Revision: ' || echo ${MALI_RELEASE_NAME}) 2>/dev/null | sed -e 's/^Revision: //') SVN_REV := 1 5、sys_config.fex中配置加载摄像头ov5640，I2C总线序号，从机地址等等。 R:\wyb\ruoge_kerun_r8_ov2643\lichee\tools\pack\chips\sun5i\configs\r8-evb\sys_config.fex ;-------------------------------------------------------------------------------- ;csi gpio configuration ;csi_if: 0:hv_8bit 1:hv_16bit 2:hv_24bit 3:bt656 1ch 4:bt656 2ch 5:bt656 4ch ;csi_mode: 0:sample one csi to one buffer 1:sample two csi to one buffer ;csi_dev_qty: The quantity of devices linked to csi interface ;csi_vflip: flip in vertical direction 0:disable 1:enable ;csi_hflip: flip in horizontal direction 0:disable 1:enable ;csi_stby_mode: 0:not shut down power at standby 1:shut down power at standby ;csi_iovdd: camera module io power , pmu power supply ;csi_avdd: camera module analog power , pmu power supply ;csi_dvdd: camera module core power , pmu power supply ;pmu_ldo3: fill "axp20_pll" ;pmu_ldo4: fill "axp20_hdmi" ;fill "" when not using any pmu power supply ;csi_flash_pol: the active polority of the flash light IO 0:low active 1:high active ;-------------------------------------------------------------------------------- [csi0_para] csi_used = 1 csi_mode = 0 csi_dev_qty = 1 csi_stby_mode = 1 ;csi_mname = "gc0308" ;csi_mname = "ov2640" csi_mname = "ov2643" ;csi_mname = "ov7670" csi_twi_id = 2 ;csi_twi_addr = 0x30 csi_twi_addr = 0x60 ;csi_twi_addr = 0x42 csi_if = 0 csi_vflip = 0 csi_hflip = 1 csi_iovdd = "" csi_avdd = "" csi_dvdd = "" csi_flash_pol = 1 ;csi_mname_b = "" ;csi_twi_id_b = 1 ;csi_twi_addr_b = 0x78 ;csi_if_b = 0 ;csi_vflip_b = 1 ;csi_hflip_b = 0 ;csi_iovdd_b = "" ;csi_avdd_b = "" ;csi_dvdd_b = "" ;csi_flash_pol_b = 1 csi_pck = port:PE00<3> csi_ck = port:PE01<3> csi_hsync = port:PE02<3> csi_vsync = port:PE03<3> csi_d0 = port:PE04<3> csi_d1 = port:PE05<3> csi_d2 = port:PE06<3> csi_d3 = port:PE07<3> csi_d4 = port:PE08<3> csi_d5 = port:PE09<3> csi_d6 = port:PE10<3> csi_d7 = port:PE11<3> csi_reset = port:power3<1><0> csi_power_en = csi_stby = port:PB10<1><1> csi_flash = csi_af_en =

1、配置ov7725在android层配置的分辨率为vga（预览/拍照/录像）注意：系统自带的快拍APP就在这里查找分辨率参数发送到camera的HAL层。这里得分辨率设置为：640x480（VGA）驱动里面搜索可以设置为：640x480 R:\wyb\ov7725_r16_dev\android\device\softwinner\astar-evb20\configs\camera.cfg ;------------------------------------------------------------------------------- ; 用于camera的配置 ; ; 采用格式: ; key = key_value ; 注意: 每个key需要顶格写; ; key_value紧跟着key后面的等号后面, 位于同一行中; ; key_value限制大小为256字节以内; ; ;------------------------------------------------------------------------------- ;------------------------------------------------------------------------------- ; exif information of "make" and "model" ;------------------------------------------------------------------------------- key_camera_exif_make = MAKE_A31S key_camera_exif_model = MODEL_A31ST ;------------------------------------------------------------------------------- ; 1 for single camera, 2 for double camera ;------------------------------------------------------------------------------- number_of_camera = 1 ;------------------------------------------------------------------------------- ; CAMERA_FACING_BACK ; gc0307 ov2640 ;------------------------------------------------------------------------------- camera_id = 0 ;------------------------------------------------------------------------------- ; 1 for CAMERA_FACING_FRONT ; 0 for CAMERA_FACING_BACK ;------------------------------------------------------------------------------- camera_facing = 0 ;------------------------------------------------------------------------------- ; 1 for camera without isp(using built-in isp of Axx) ; 0 for camera with isp ;------------------------------------------------------------------------------- use_builtin_isp = 0 ;------------------------------------------------------------------------------- ; camera orientation (0, 90, 180, 270) ;------------------------------------------------------------------------------- camera_orientation = 90 ;---------------------------------------------------------

Linux/Unix社区

23,116

社区成员

74,506

社区内容

发帖

与我相关

我的任务

社区管理员

加入社区

近7日
近30日
至今

加载中

查看更多榜单

社区公告

暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章