STM32 实时系统的移植

[scutwyz]

在常见的ucos的移植版本中，使用了双堆栈了？
但是好像都没有设置为用户级别的线程模式，也没有设置svc。。。

但是确在任务的切换函数里面调用的PSP，求解释；

源码：
;/**************************************************************************************
;* 函数名称: OSPendSV
;*
;* 功能描述: OSPendSV is used to cause a context switch.
;*
;* 参 数: None
;*
;* 返 回 值: None
;***************************************************************************************/

PendSV_Handler
CPSID I ; Prevent interruption during context switch
MRS R0, PSP ; PSP is process stack pointer 如果在用PSP堆栈,则可以忽略保存寄存器,参考CM3权威中的双堆栈-白菜注
CBZ R0, PendSV_Handler_Nosave ; Skip register save the first time

SUBS R0, R0, #0x20 ; Save remaining regs r4-11 on process stack
STM R0, {R4-R11}

LDR R1, =OSTCBCur ; OSTCBCur->OSTCBStkPtr = SP;
LDR R1, [R1]
STR R0, [R1] ; R0 is SP of process being switched out

; At this point, entire context of process has been saved
PendSV_Handler_Nosave
PUSH {R14} ; Save LR exc_return value
LDR R0, =OSTaskSwHook ; OSTaskSwHook();
BLX R0
POP {R14}

LDR R0, =OSPrioCur ; OSPrioCur = OSPrioHighRdy;
LDR R1, =OSPrioHighRdy
LDRB R2, [R1]
STRB R2, [R0]

LDR R0, =OSTCBCur ; OSTCBCur = OSTCBHighRdy;
LDR R1, =OSTCBHighRdy
LDR R2, [R1]
STR R2, [R0]

LDR R0, [R2] ; R0 is new process SP; SP = OSTCBHighRdy->OSTCBStkPtr;
LDM R0, {R4-R11} ; Restore r4-11 from new process stack
ADDS R0, R0, #0x20
MSR PSP, R0 ; Load PSP with new process SP
ORR LR, LR, #0x04 ; Ensure exception return uses process stack
CPSIE I
BX LR ; Exception return will restore remaining context

[lbing7]

其实，UCOS的官方网站上有STM32的移植文件

省事的话，可以直接用的。。。

呵呵

[scutwyz]

本人明白了，看错文档了。。。

万分感谢！