社区
控件
帖子详情
ActiveXExe中控件使用的问题
numen_wlm
2012-09-28 11:15:52
我做了一个ActiveX Exe的模块,这个里面有一个控件,我现在想在这个exe之外的一个Exe里面使用那个ActiveXExe里面的控件,也就是加到另外一个Exe的界面上去,这个能做的吗?
...全文
372
3
打赏
收藏
ActiveXExe中控件使用的问题
我做了一个ActiveX Exe的模块,这个里面有一个控件,我现在想在这个exe之外的一个Exe里面使用那个ActiveXExe里面的控件,也就是加到另外一个Exe的界面上去,这个能做的吗?
复制链接
扫一扫
分享
转发到动态
举报
写回复
配置赞助广告
用AI写文章
3 条
回复
切换为时间正序
请发表友善的回复…
发表回复
打赏红包
hhlxin
2012-10-03
打赏
举报
回复
我做了一个ActiveX Exe的模块,这个里面有一个控件,我现在想在这个exe之外的一个Exe里面使用那个ActiveXExe里面的控件,也就是加到另外一个Exe的界面上去,这个能做的吗
能
贝隆
2012-10-02
打赏
举报
回复
如果是ocx文件,那么可以注册后再在工程中引用它。
threenewbee
2012-10-02
打赏
举报
回复
把控件单独提取出来作为一个工程编译,再引用ocx。
中
控sdk驅動加示例
ZKFinger SDK installation notes ------------------------------------------------ 1. Install Device Drivers Before using the equipment,the driver must be installed , if there are the old version of the driver in the system, Please uninstall it before installation. , Do not connect the Sensor with PC before installing the driver , run Setup.
exe
to complete the installation. after the Driver installation is completed, Conect the sensor to PC , the PC will find new equipment in the normal state, just follow the prompt of operation, If the system suggested that is a restart, then "no" is your choice, just take out the sensor, reinserted it again once. 2. Registration Biokey.ocx (
ActiveX
Control), Biokey.ocx mainly completed registration and identification, such as fingerprints, driver is not responsible for This file installation, according to the required the developer will package this file . Biokey.ocx can be put to the specified user's directory, it is better to copy it under the Windows system directory Registration way: in the command running line enter following: Regsvr32 c: \ windows \ system32 \ biokey.ocx (directory self) 3. when upgrade UareU Series fingerprint sensor to Zksensor6000, the first update drivers, the second update biokey.ocx, the original program will not be affected, but if the original program supports multiple fingerprint device,the use of zksensor6000 does not recommend , because this two sensors are able to access a computer at the same time , but if zksensor6000 can and UarU fingerprint are used together at same time, the program need to do the following changes to the UareU Fingerprint device, the control attributes SensorIndex set to 0, on Zksensor6000 the SensorIndex attribute set to 1000.
指纹开发包 指纹识别 指纹认证开发工具
Biokey SDK简要安装说明 ------------------------------------------------ 1、安装设备驱动程序,在
使用
设备前必须首先安装驱动程序,如果安装过旧版本的驱动程序, 请在安装前卸载。在安装驱动前不要将采集仪和PC连接,运行Setup.
exe
即可完成安装。 驱动程序完成后,将采集仪与PC连接,正常情况下,PC会发现新设备,如果系统提示重新启动 可选“否”,将采集仪拨下重插一次即可。 2、注册Biokey.ocx(
ActiveX
控件
) Biokey.ocx可以放置到用户指定的目录,建议复制到Windows系统目录下 注册方法:在运行命令行打入:Regsvr32 c:\windows\system32\biokey.ocx(目录自定) 3、Uru4000用户升级到4000B时,第一更新驱动程序,第二更新biokey.ocx
项目实战:Java Applet与
ActiveX
控件
应用
控件
技术是B/S项目的开发手段,在项目实战
中
非常重要! 作为一个程序员和架构师,掌握
控件
的开发和集成技术,是必须的技能; 浏览器
中
显示的内容主要是标签,当需要复杂操作时,
控件
技术是超越标签、给B/S项目扩展...
Qt 开发
activex
控件
(以
中
控的指纹仪URU4000B为例)
由于变的比较懒惰,很长时间没有写博客了,今天想了想,决定写一篇文章:最近公司要求开发指纹采集仪,由于对Qt不是很了解,所有对我开发而已比较困难,困难怎么办,上网查查有不有资料,发现用Qt开发
activex
控件
的例子,寥寥无几,因此,想写下一片为将来要开
activex
控件
的同行们,贡献一点点资料。网上的资料很多都是不太详细,寥寥几笔,让人长叹,以下是我开发此指纹的代码过程(以
中
控指纹采集器为例)!
ppt
中
控件
未在计算机
中
注册,PowerPoint
中
控件
没注册是怎么回事?
您好,了解到您在
使用
Power Point时遇到
问题
。该
控件
是自行安装的
控件
吗?文件-选项-信任
中
心设置
中
,检查一下
ActiveX
设置,看下是否有存在选择禁用所有
控件
的情况。如果是,尝试手动修改一下相关的设置,看下效果。如果这个文件是在其他计算机上制作后,发送到当前的设备上尝试打开时出现上述情况,建议您检查一下在制作该文件时,是否有存在调用一些程序或是加载项,而这些东西是当前设备上所没有安装的。如...
控件
1,451
社区成员
41,355
社区内容
发帖
与我相关
我的任务
控件
VB 控件
复制链接
扫一扫
分享
社区描述
VB 控件
社区管理员
加入社区
获取链接或二维码
近7日
近30日
至今
加载中
查看更多榜单
社区公告
暂无公告
试试用AI创作助手写篇文章吧
+ 用AI写文章