VC CUSTOM build下的input file 路径怎么改

otiru 2013-01-23 09:59:22
如图
...全文
105 2 打赏 收藏 转发到动态 举报
写回复
用AI写文章
2 条回复
切换为时间正序
请发表友善的回复…
发表回复
jimette 2013-01-23
  • 打赏
  • 举报
 回复
在工程的属性里面试试！
otiru 2013-01-23
  • 打赏
  • 举报
 回复

上面图发错了。。
eac3to V3.17
v3.17 * updated libFLAC to version 1.2.1 * added a flush after every log line to help GUIs * "eac3to some.mpls" now also works if the stream files aren't there, anymore * fixed: number of subtitles was not appended to demuxed subtitles' file name * fixed: dialnorm removal (for Nero decoder) failed with some 2.0 TrueHD files v3.16 * added undocumented "-no2ndpass" switch to turn off 2nd pass processing * fixed: two pass processing sometimes produced superfluous sup files * fixed: MPG/EVO/VOB audio tracks with "PES extension 2" were not detected * fixed: very small W64/RF64 files were not detected correctly * fixed: when processing was aborted, log file was sometimes not created * fixed: sometimes specifying a title number addressed the wrong HD DVD title v3.15 * "24.975" is now interpreted as "25.000/1.001" * Blu-Ray "sup" are demuxed with DTS set to 0 again, proper fix will come later * fixed: error code not set for "source file format could not be detected" * fixed: audio resampling from/to 24.975 didn't work properly * fixed: WAV files beginning with lots of zeroes were sometimes not accepted v3.14 * WAV reading was broken for all but very small files (introduced in v3.13) v3.13 * fields and frames are counted and displayed separately now * added DIRAC bitstream parser * added support for "-24.975" and "-changeto24.975" * Blu-Ray subtitle demuxing: PTS value is now written to both PTS + DTS * joining MKV files is now declined with a proper error message * last chapter is now removed, if it's less than 10 seconds from end of movie * fixed: "-normalize" didn't work with stdout, anymore * fixed: audio delay was incorrect when 1st m2ts part contained no audio data * fixed: very small WAV files were not detected correctly * fixed: "eac3to source.eac3 dest.dts -core" crashed v3.12 * fixed: track languages for HD DVD discs were not shown * fixed: MLP channel order was wrong for some specific channel configurations * fixed: "DirectShow reported 255 channels" happened sometimes v3.11 * fixed: MKV subtitle track language wasn't shown v3.10 * Blu-Ray title listing now includes chapter information * fixed: v3.09 didn't show track languages for Blu-Rays v3.09 * added support for MKV "SRT/UTF8", "SRT/ASCII", "ASS" and "SSA" subtitles * increased some internal buffers to avoid AC3 overflow in the "thd ac3 joiner" * fixed: frame counting didn't work for MKV video tracks * fixed: video track FPS change was sometimes declined * fixed: video tracks with "strange" FPS were sometimes handled incorrectly * fixed: clipping removal 2nd pass was executed even for "stdout" * fixed: "eac3to -test" displayed an outdated Nero download link * fixed: specifying a specific playlist still used default playlist's chapters v3.08 * fixed: reading physical disc speed was abysmal (introduced in v3.07) * fixed: read error from physical drive resulted in crash v3.07 * added support for MKV video tracks without sequence headers in bitstream * added support for old style MKV AAC tracks * added support for various MKV "A_MS/ACM" audio formats * added support for various MKV "V_MS/VFW/FOURCC" video formats * added warning for tracks where bitstream parsing failed * demuxing a video track now also complains about video gaps/overlaps * the "-check" option now also complains about video gaps/overlaps * optimized memory allocation * fixed: adding subtitle caption count to filenames sometimes didn't work * fixed: subtitle caption counts in log sometimes had wrong track numbers * fixed: all non-supported MKV tracks shared the same description * fixed: incorrect framerate mismatch complaint was shown for pulldown sources * fixed: FLAC tracks in MKV files don't slow down detection, anymore * fixed: source file detection read 300MB from every source file v3.06 * added MKV reading/parsing support * added demux support for MKV (E-)AC3, DTS(-HD), AAC, MPx, FLAC and WAV tracks * added demux support for MKV "modern style" MPEG2, VC-1 and h264/AVC tracks * reading from (HD) DVD and Blu-Ray drives uses different reading APIs now * empty tracks in TS/m2ts container are not listed, anymore * for 24.000 fps video tracks a little warning is displayed now * when demuxing subtitle files, the number of captions is added to the filename * timestamp derived FPS is used for gap checking instead of video bitstream FPS * fixed: 44.1khz AC3 encoding was still broken * fixed: zero byte stripping pass was done for true 24bit TrueHD tracks * fixed: downconverting WAV files with 0x3f channel mask didn't work * fixed: log output "remaining delay [...]" was sometimes wrong for AC3 tracks * fixed: silent frame creation was tried for E-AC3 although it can't work v3.05 * warning is shown if h264 video bitstream contains "full range" flag * h264 video bitstream "full range" flag is automatically removed * you can disable removal of the "full range" flag by doing "-keepFullRange" * added reader for external DVD, HD DVD and Blu-Ray SUP files * external SUP files can be delayed now * number of HD DVD and DVD subtitles in SUP track is counted and displayed * number of forced and non-forced Blu-Ray subtitles in SUP track is displayed * "-check" option now also works for demuxed audio, video and subtitle tracks * when reading from physical disc drive, 2KB (instead of 1MB) blocks are read * improved automatic skipping over damaged first 5MB of TS/m2ts files * fixed: resampling and Surcode encoding didn't work in one step * fixed: TRP detection crashed * fixed: track listing sometimes contained tracks without description * fixed: h264 with missing framerate in 1st sequence header made eac3to crash * fixed: some AC3WAV files were not detected correctly * fixed: video frame count was not displayed when 2nd pass was executed v3.04 * video track framerates are now shown with up to 3 decimals, if necessary * m2ts/TS framerate is determined by interpreting video track timestamps * m2ts/TS framerate is displayed in the format description (if available) * warning is shown if container timestamps don't match video framerate * warning is shown if video bitstream has a non-standard framerate * video without framerate information: container framerate is used * video without framerate information: framerate can be set (e.g. "-23.976") * video without framerate information: new framerate is written to bitstream * remaining non-fixed audio delay is now shown in log * command prompt colors are restored after eac3to has run through * fixed: 2-pass processing for stripping zero bytes sometimes crashed * fixed: CA (Conditional Access) tracks were shown as "Unknown audio track" v3.03 * fixed: MPEG2 1088 to 1080 cropping was still incomplete v3.02 * fixed: VC-1 stream handling was broken * fixed: destination file extension "*.lpcm" didn't work with 2pass processing * fixed: MPEG2 1088 to 1080 cropping was incomplete * fixed: no log was being created when "temp file could not be interpreted" v3.01 * fixed: m2ts LCPM demuxing didn't work with v3.00 * fixed: TrueHD -> TrueHD+AC3 conversion didn't work with v3.00 v3.00 * broken AC3, DTS, AAC and MPx streams are now automatically repaired * errors in TS/m2ts files are now reported (with runtime) and ignored * damaged first max 5MB and max 5% of a TS/m2ts file are automatically skipped * video/audio tracks which can't be parsed, are now demuxed in raw form * added support for "line 21" closed captions in ATSC/NTSC broadcasts and DVDs * added reading of movie / network name from "line 21" XDS information * for gaps, edits & repairs > 1000ms eac3to now inserts silence by default * for gaps, edits & repairs < 1000ms eac3to now loops audio by default * option "-silence" forces eac3to to insert silence instead of looping audio * option "-loop" forces eac3to to loop audio instead of inserting silence * newly encoded AC3 frame is now used for "silence" instead of file's 1st frame * increased reading block size (might improve reading performance) * optimized TS/m2ts demuxing performance * optimized MPEG2, VC-1 and h264 parsing performance * command line output is colored now (e.g. errors drawn in red) * MPEG2 1920x1088 bitstream is now automatically patched/cropped to 1920x1080 * log file now contains "" and "" indicators * workaround for movie playlists which want the same m2ts file played twice * added version check for eac3to (doh!) * when a read error occurs, reading is tried again up to 3 times * (E-)AC3 frames with -0db dialnorm are now automatically patched to -31db * updated to newer libAften build -> fixes 44.1khz encoding * fixed: sometimes "The last DTS frame is incomplete" was a false alarm * fixed: mkvtoolnix version check didn't work, anymore * fixed: errors were meant to be output to stderr, but they weren't * fixed: automatic gap/overlap fixing with AAC targets aborted processing * fixed: positive edit began a bit too early * fixed: two ID3 tags after each other made eac3to fail detecting the format * fixed: some VOB files were not detected properly v2.87 * fixed: negative edit was done too late (introduced in v2.86) v2.86 * fixed: "1:some.ac3" instead of "1: some.ac3" failed for 2 digit track numbers * fixed: "eac3to source movie.mkv" demuxed video instead of muxing to MKV * negative edit now begins at the specified runtime instead of ending there v2.85 * using "eac3to source video.h264" doesn't demux audio/subtitle tracks, anymore * using "eac3to source movie.*" demuxes video, audio and subtitle tracks * using "eac3to source 1: video.* 2: audio.*" demuxes the specified tracks * AC3 and E-AC3 dialnorm removal now uses "-31db" instead of "-0db" * workaround for DTS files where last byte is missing in each audio frame * fixed: v2.84 sometimes crashed when parsing HD DVD XML files * fixed: v2.84 sometimes chose incorrect XML file * fixed: v2.84 sometimes chose wrong m2ts playlist file * fixed: some actions were eventually applied twice when "-2pass" was used * fixed: AAC encoding quality "quality=0.0x" was passed to Nero as "0.x" v2.84 * fixed: 2nd pass gap removal was tried (and failed) for TrueHD+AC3 targets * fixed: processing aborted when trying to fix gaps in PCM destination files * fixed: more than one RAW/PCM overlaps resulted in lost sync (since v2.81) * fixed: demuxing TrueHD+AC3 stream by title number didn't renew the AC3 part * new option for removing or looping audio data, e.g. "-edit=0:20:47,-100ms" * title sorting criteria changed: resolution is more important than runtime * new option "-lowPriority" sets eac3to to background/idle priority * libav warnings are now assigned to the affected audio track * fixed: "lossless check failed" false alarms for seamless branching movies * fixed: spike removal filter was not active for the very last overlap/gap * improved muxing h264 streams which begin with double sequence headers * source files are now opened with "share read + write access" * destination files are now opened with "share read access" v2.83 * fixed: gap/overlap correction didn't work for FLAC and WAV files * fixed: when clipping was detected, 2nd pass was not always executed correctly v2.82 * fixed: sometimes eac3to stalled before processing (introduced in v2.81) v2.81 * audio gap/overlap fixing is now automatically done in a 2nd pass * option "-normalize" maximizes the volume of the audio data, needs 2 passes * audio clipping is detected and automatically removed in a 2nd pass * "-2pass" activates 2 pass mode (can speedup seamless branching processing) * superfluous zero bytes are now automatically removed in 2nd pass * "-phaseShift" shifts surround channel phase by 90?for DPL II downmixing * spike removal post processing filter now always produces 16bit samples * empty channels are now reported by the bitdepth analyzer as "no audio data" * option "-shutdown" shuts the PC down automatically after processing is done * the HD DVD XPL with the longest title is now loaded instead of VPLST000.XPL * eac3to can now open selected XPL files (e.g. "eac3to ADV_OBJ\VPLS002.XPL") * eac3to can now open selected mpls files (e.g. "eac3to PLAYLIST\00002.mpls") * fixed: TrueHD streams starting with a non-major header failed to decode * fixed: WAV files created by eac3to with empty channels had incorrect header * fixed: RAW/PCM gap/overlap remover sometimes didn't work correctly v2.80 * fixed: FLAC files with missing runtime information were not accepted * gone back to old VOB/EVO auto delay calculation method, more reliable for me * improved TS broadcast audio delay detection * added support for constant bitrate AAC encoding * added support for AAC encoding 0.00 and 1.00 quality v2.79 * improved m2ts file joining overlap detection (mainly for interlaced video) * vob/evo audio delay detection now uses "vobu start presentation time" * program streams which are neither VOB nor EVO are now reported as "MPG" * resampling is now automatically activated for AC3/DTS encoding, if necessary * "Mersenne Twister" random number generator is used for dithering now * zero padded DTS tracks are now displayed as such * fixed: 32bit PCM conversion to floating point was broken * fixed: with some (rare) movies first subtitle began after 50 minutes runtime * only plugins with the extension *.dll are loaded now v2.78 * fixed: h264 interlaced muxing to MKV could result in too long runtime * fixed: transcoding DTS-HD/E-AC3 core sometimes failed to work correctly * improved TS/m2ts audio delay detection * added filter to remove spikes when fixing gaps/overlaps in RAW/PCM audio * each eac3to instance has its own log file now * playlist output now also works with "-log" option * default bitrate for mono & stereo AC3 encodes lowered to 448kbps * default bitrate for mono & stereo DTS encodes lowered to 768kbps * it should be possible to handle TsSplitter splitted TS files via "+" now v2.77 * pcm/raw audio delay is now applied before resampling and fps change * parsing of command line with multiple sources files sometimes failed v2.76 * "-slowdown" now works to convert 24.000 movies to 23.976 * "-speedup" now works to convert 24.000 movies to 25.000 * option "-xx.xxx" (e.g. "-24.000") sets the FPS of the source track * option "-changeToXx.xxx" (e.g. "-changeTo23.976") changes video/audio FPS * modified FPS information is written to video bitstream (VC-1, MPEG2, h264) * demuxing with FPS change option now activates audio track transcoding * SSRC resampling parameters modified slightly to reduce steepness and ringing * fixed incorrect h264 movie slowdown gap/overlap complaints * fixed DTS-HD High Resolution bitrate calculation * dithering is now done differently per channel v2.75 * added (E-)AC3 5.1 "EX" detection * added (E-)AC3 2.0 "Surround" detection * added (E-)AC3 2.0 "Headphone" detection * NeroAacEnc is now fed with up to 32bit float (if available) * resampling option "-quality=low|high|ultra" not supported, anymore * new option "-fast" switches SSRC resampler to fast, but low quality mode * new option "-r8brain" forces use of r8brain resampler instead of SSRC * added support for AES3 PCM streams in TS container * started working on encoder plugin interface v2.74 * "-demux" failed to work for DTS-HD and "TrueHD/AC3" tracks in v2.73 * fixed: DTS-HD tracks could make processing abort at the very end of the movie v2.73 * changed TS demuxing logic to make the broken (!) new SkyHD broadcasts work * DTS core and "TrueHD/AC3" AC3 parameters are displayed separately now * when using "-core" option, eac3to now bases its decisions on core parameters * added WAV/W64/RF64 read/write support for 32bit PCM and 32/64 bit float * option "-full" allows WAV/W64/RF64 output to be native (default <= 24bit PCM) * Surcode DTS encoding is now done with up to 32bit float (if available) * Aften AC3 encoding is now done with up to 64bit float (if available) v2.72 * fixed: per channel bitdepth analyzation didn't work correctly v2.71 * fixed: v2.70 detected Blu-Rays as "TS" without chapters and track languages * fixed: TrueHD downmixing to 2.0 didn't work v2.70 * added floating point support to the complete audio processing chain * added gain functionality, e.g. "-3db" or "+1db" * bitdepth analyzation is now done separately for each channel * fixed: when decoding lossy audio with libav, peaks were clipped incorrectly * fixed: libav MP1/2/3 decoder output was cut down to 24bit * fixed: with some EVO sources the AC3 track was not listed * fixed: if no key frame was found, h264 track in m2(ts) was not listed * fixed: video/audio data before first PAT/PMT was discarded * Blu-Ray chapters now don't contain link points, anymore, unless necessary * added 10db boost to LFE channel, when "-down2" and "-mixlfe" are used * ArcSoft output can now be overwritten to "-2", "-6", "-7" or "-8" channels v2.69 * added high precision SSRC resampler * resampling "-quality" now allows "low", "high" (SSRC) or "ultra" (r8brain) * resampling quality now defaults to "high" (SSRC) * bitdepth is now analyzed separately for original vs. processed data * fixed: downmixing 16 bit DTS tracks to 5.1 or 2.0 didn't work * fixed: Sonic Decoder was incorrectly assumed to decode XXCh DTS files to 6.1 * for movies the Haali Muxer can't handle "-seekToIFrames" is suggested now v2.68 * fixed crash when transcoding Blu-Ray/HD DVD track to FLAC v2.67 * information about HDCD and real bitdepth is now stored into FLAC metadata * information about real bitdepth is now read from FLAC metadata * PTS break: PTS is increased by 1 frame (fixes some false overlap warnings) * fixed: video gap log text was sometimes not correct (runtime information) * added undocumented switch "-neroaacenc="c:\whatever\neroaacenc.exe"" * error log messages are now output to stderr instead of stdout * improved "which mkvtoolnix is currently installed?" check * fixed: mkvtoolnix version check "Oct" date was not interpreted correctly v2.66 * changed eac3to to allow AAC encoding with 7.1 channels (for new Nero encoder) * fixed AGM creation for files bigger than 4GB * added support for Nero's new AAC Encoder download URL * lowered volume of error/success sounds * when there are 2 similar playlists the one with less chapters is ignored now v2.65 * automatic channel remapping for 6.1 tracks with wrong channel mask * automatic channel remapping for ArcSoft DTS decoder 6.1 tracks * fixed: TrueHD -> Surcode encoding didn't work, anymore * fixed: MPEG2 + h264 video gap/overlap removal didn't work properly v2.64 * added channel mask reading support to Blu-Ray PCM track parser * added channel mask reading support to TrueHD parser * added channel mask reading & writing support to FLAC decoder / encoder * changed 5.x channel mask from $03x to $60x * changed 6.x channel mask from $13x to $70x * mono wavs output now creates correct names for some channel masks * when transcoding 6.1 sources to PCM, 7 channel doubling is activated now * fixed: DTS channelmask detection was incorrect for very strange configs * fixed: sometimes the h264 video stream of a Blu-Ray m2ts was not detected v2.63 * fixed: incorrect detection of 6.0 DTS tracks as 5.0 * fixed: incorrect libav DTS channel remapping for 6.x or 7.x tracks * fixed: incorrect ArcSoft DTS channel remapping for "6.0" and "2/2.1" tracks * fixed: v2.61+62 incorrectly decoded 16bit TrueHD tracks to 24bit FLAC/WAV/RAW * fixed: some DTSWAV files made HDCD decoder crash * fixed: DTSWAV and AC3WAV samplerate and bitdepth were reported incorrectly * improved DirectShow channel configuration reporting * undocumented option -progressnumbers now outputs "analyze:" and "process:" v2.62 * fixed: downmixing 16 bit 7.1 DTS tracks to 5.1 stopped working in v2.61 v2.61 * option "-no7doubling" is not supported anymore * option "-double7" added which upconverts 6.1 to 7.1 * added read/write support for Sony wave64 (*.w64) format * added read/write support for RF64 wave64 (*.rf64) format * added write support for AGM format * true bitdepth (e.g. 18 bits) is written to extensible wav header now * when reading 16/24 (true/storage) WAV files, zero bytes are stripped now * added HDCD detection for WAV and FLAC files * added HDCD detection for PCM tracks in VOB/EVO/m2ts containers * added HDCD decoder written by Christopher Key * added new option "-decodeHdcd" to decode HDCD information * HDCD track -> lossy format: HDCD decoding is automatically activated * when DTS-MA and TrueHD tracks are decoded, a check for HDCD is done * fixed some incorrect DTS channel masks * added automatic libav DTS channel remapping * added automatic ArcSoft DTS channel remapping * added channel map manipulation to make funny DTS tracks decode with Sonic * added channel map manipulation to make funny DTS tracks decode with ArcSoft * added channel volume modification to undo ArcSoft mono surround splitting * for TrueHD+AC3 creation AC3 delay and gap correction are disabled now * fixed: DTSWAV and DTSAC3 readers reported too long runtime * fixed: sometimes processing aborted with a "bitdepth reducer" complaint v2.60 * fixed: in v2.59 "-analyzeBitdepth" stopped working for Blu-Ray TrueHD tracks v2.59 * extension ".thd+ac3" is supported now to define destination format * TrueHD tracks without AC3 core can be converted to TrueHD/AC3 now * demuxing a single-part Blu-Ray title keeps the original "TrueHD/AC3" data * demuxing a multi-part Blu-Ray title automatically redoes the AC3 substream * added workaround for Blu-Ray playlists with multiple last "invalid" parts * fixed: "-check" didn't work for LPCM tracks v2.58 * h264 parser rewritten: framerate, pulldown etc is detected reliably now * h264 pulldown is automatically removed from progressive movie sources now * h264 pulldown removal can be disabled by using "-keepPulldown" * h264 muxing now fully supports streams with mixed 23.976 and 29.970 content * h264 1920x1088 bitstream is now automatically patched/cropped to 1920x1080 * h264 filler data is now already removed during demuxing * h264 sources with funny framerates (e.g. Luxe.tv HD) are patched to 25fps now * mixed video/movie h264 streams are now always muxed with 29.970 timestamps * speedup/slowdown now changes framerate information in the h264 bitstream * options "-24p", "-60i" and "-30p" are no longer supported * fixed Blu-Ray seamless branching subtitle remuxing * added workaround for Blu-Ray playlists with a last small "invalid" m2ts part * bitdepth analyzation is now done for decoded FLAC, WAV, PCM, DTS MA, too * bitrate is now also reported for FLAC, WAV and PCM tracks * when encoding AC3, DTS or AAC, the encoding bitrate is reported * fixed: v2.57 incorrectly decoded 16bit TrueHD tracks to 24bit FLAC/WAV/RAW * (M2)TS discontinuities before the first unit start are ignored now * new option "-progressnumbers" replaces progress bar with percentage numbers v2.57 * added automated support for Nero AAC command line encoder * added "quality=0.xx" (0.00 - 0.99) parameter to control AAC encoder quality * added Nero AAC encoder check to the "-test" list * "-test" checks whether a new Haali Matroska Muxer version is available * "-test" checks whether a new MkvToolnix release build is available * "-test" checks whether a new MkvToolnix beta build is available * "-test" checks whether a new Nero AAC encoder version is available * added TRP container support (TS files without PMT/PAT) * parameter "-extensible" is no longer supported (it's default now) * new parameter "-simple" can be used to disable the "-extensible" wav header * decoded TrueHD tracks: bitdepth is now automatically analyzed in more detail * option "-analyzeBitdepth" manually activates extended bitdepth analyzation * DVB subtitle tracks are listed now - can't be demuxed, though * option "-check" doesn't fail on DTS Express tracks, anymore v2.56 * fixed: processing aborted when a VC-1 sequence end code was found v2.55 * AAC bitstream parser added * AAC auto detection added * AAC bitstream delay added * AAC bitstream gap/overlap correction added * AAC decoding (Nero & Sonic) added * old MP2 parser now "officially" and properly supports MP1, MP2 and MP3 * MP3 decoding (libav & Nero) added * added support for MPEG Audio version 2 and version 2.5 * added (limited) support for ID3, APE and LYRICS tags in MP3 and AAC tracks * improved VOB/EVO audio delay detection algorithm * detection and automatic skipping of invalid vob units * options "-60i" and "-24p" are no longer supported for MPEG2 video * improved detection of MPEG2 framerate / pulldown state / mode * improved MPEG2 muxing warnings * several bugs in MPEG2 video muxing fixed * fixed interlaced VC-1 muxing with user data (Nine Inch Nails) v2.54 * VC-1 pulldown removal rewritten (comparable to vc1conv 0.4, but faster) * VC-1 pulldown removal is activated by default * VC-1 pulldown removal can be manually deactivated by "-keepPulldown" option * VC-1 pulldown removal is also available and activated when muxing to MKV now * fixed Blu-Ray subtitle demuxing for seamless branching movies * better task separation when doing multiple operations with an audio track v2.53 * Blu-Ray PGS subtitle demuxing support added * added support for EVO/VOB subtitles which begin very late in the file * MPEG2 video muxing doesn't rely on GOP headers, anymore * all (M2)TS discontinuities are now reported with exact file position * fixed: reading language information from TS files didn't work correctly v2.52 * fixed muxing of MPEG2 broadcasts where "temporal_reference" overruns * MPEG2 bitstream headers are now updated correctly when speedup is performed * MPEG2 bitstream headers are now updated correctly when slowdown is performed * MPEG2 bitstream headers are now updated correctly when pulldown is removed * pulldown removal is now automatically disabled for MPEG2 broadcasts * AC3WAV (SPDIF formatted) support added v2.51 * DTS Express bitstream parser added * DTS Express auto detection added * DTS Express bitstream delay added * DTS Express bitstream gap/overlap correction added * DTS Express decoding (Nero & ArcSoft) added * fixed: 6.1 -> 7.1 channel doubling resulted in wrong channel order * added (undocum.) option "-no7doubling" to disable 6.1 -> 7.1 channel doubling * DTS tracks with funny speaker settings are displayed as "7.1 (strange setup)" * warning is displayed when decoding "7.1 (strange setup)" tracks with ArcSoft v2.50 * ArcSoft DTS Decoder DLL is now directly accessed instead of using DirectShow v2.49 * DTS parser sets correct channel mask now * DTS-HD parser now properly detects format, channels and samplerate * added support for ArcSoft DTS(-HD) Decoder * added several tweaks to make ArcSoft Decoder behave correctly * added ArcSoft test to the "-test" processing * made ArcSoft Decoder default for DTS and DTS-HD decoding v2.48 * 96kHz LPCM tracks in (M2)TS and EVO/VOB containers didn't work correctly * "Applying (E-)AC3 delay" now only shows if the bitstream is actually modified * fixed crash in MP2 reader when checking some PCM tracks * added support for MLP formats 13 - 16 * improved/corrected MLP channel descriptions * MLP parser sets correct channel mask * added proper channel remaps for libav MLP decoding of "funny" channel formats * added proper channel remaps for Nero MLP decoding of "funny" channel formats * added proper channel remaps for Nero AC3 decoding of "funny" channel formats * when doubling 7th channel the channel mask is set correctly now * channel mask is corrected if a decoder doesn't output all channels * channel mask is corrected if channel downmixing is performed v2.47 * improved detection of AC3/DTS tracks in TS/M2TS container * added support for Blu-Ray style LPCM tracks in TS container * fixed 44.1kHz AC3 tracks * fixed crazy audio delay values when no video track was detected * sometimes video/audio tracks were not properly detected in (M2)TS container * MPEG2 demuxing/remuxing incorrectly output the first sequence headers twice * sequence end codes are removed when demuxing video now, too * MPEG2 pulldown removal is automatically activated only for EVO HD sources now * MPEG2 pulldown removal can be manually activated by using "-stripPulldown" * MPEG2 pulldown removal can be disabled by using "-keepPulldown" v2.46 * MPEG2 muxing now fully supports streams with mixed 23.976 and 29.970 content * mixed video/movie MPEG2 streams are now always muxed with 29.970 timestamps * if a movie MPEG2 stream goes video, processing is automatically restarted * MPEG2 pulldown is now automatically removed whenever an MPEG2 stream is read * new option "-keepPulldown" can be used to disable MPEG2 pulldown removal * corrected default WAV channel masks for 4.0, 6.1 and 7.1 * added proper channel remaps for libav AC3 decoding of "funny" channel formats * added general channel mask support * WAV parser reads channel mask from extensible header * (E-)AC3 parser sets correct channel mask v2.45 * Blu-Ray angles are now reported as separate titles * duplicate playlists are not listed in the "folder view", anymore * reduced TrueHD and RAW/PCM gap/overlap threshold to 7ms * reduced (E-)AC3 gap/overlap threshold to 60% of the runtime of one audio frame * reduced MP2 gap/overlap threshold to 60% of the runtime of one MP2 frame * reduced DTS threshold to 60% of the runtime of one DTS frame, but at least 7ms * fixed: Blu-Ray chapter export sometimes wrote incorrect "00:00:00.000" items * improved handling of MPEG2 streams (changes from interlaced to progressive) * video information now shows "with pulldown flags", if applicable * removed "-ignoreDiscon" from help; hint is shown when a discontinuity occurs * added "-ignoreEncrypt" option; hint is shown when a source is encrypted * new option "-extensible" creates WAV files with a slightly different header * fixed some smaller bugs v2.44 * libav is now automatically used when Nero/Sonic decoders are not working * gap/overlap correction of RAW/PCM tracks sometimes aborted * rerunning de/remuxing to correct gaps/overlaps ignored RAW/PCM tracks * "lossless check failed" messages are surpressed on join points now v2.43 * added automatic Blu-Ray playlist parsing * added support for multi part (e.g. seamless branching) Blu-Ray titles * audio gap/overlap detection rewrite completed * added audio gap/overlap correction functionality * added Blu-Ray chapter support * log lines are now prefixed with a track identifier * RAW/PCM delay is used instead of bitstream delay, if possible * fixed: video framecount was missing v2.42 * added support for 16bit DTSWAV files * fixed: Blu-Ray TrueHD support was broken v2.41 * added full MP2 (MPEG2 audio) support including decoding + bitstream delay * added TS/M2TS runtime detection * improved VOB/EVO runtime detection * added TrueHD gap/overlap detection * audio gap/overlap detection logic rewritten (not complete yet) * fixed: log file option didn't work correctly * fixed: some DTS tracks in PAL TS broadcasts weren't detected correctly * fixed: some E-AC3 tracks in PAL TS broadcasts weren't detected correctly v2.40 * video framecount is now also shown for TS/M2TS demuxing/remuxing * "-check" option added to check container for corruption * TS/M2TS: discontinuity check sometimes fired false alarms * HD DVD subtitle language/description was not always correct * title listing is only shown if there are at least 2 titles * if there is only one title, the title is automatically selected * TS/M2TS audio delay detection was broken * improved audio delay detection for broadcasts and badly mastered discs * TS/M2TS video demuxing could eventually add some invalid data * new option "log=c:\whatever\log.txt" specifies the log file path/name v2.39 * simple audio transcoding was broken v2.38 * fixed file path handling bug v2.37 * added HD DVD chapter support * added HD DVD subtitle demuxing support * added pre-freeze detection for Haali Matroska Muxer bug * invalid characters are removed from file names now * log file is copied to destination path (of first destination file) v2.36 * TS/M2TS: discontinuity is only checked for tracks which are de- or remuxed * TS/M2TS: "-demux" creates both a "thd" and an "ac3" file for "thd/ac3" tracks * TS/M2TS: "eac3to source.m2ts movie.mkv" transcodes "thd/ac3" tracks to FLAC * M2TS: track language is displayed (if the file "xxxxx.clpi" is available) * TS: track language is displayed (if the source file contains this info) * video gaps/overlaps in the last 5 seconds of the movie are ignored now v2.35 * fixed broken EVO support v2.34 * TS/M2TS: fixed PAT/PMT reading bug * TS/M2TS: new "-ignoreDiscon" option makes eac3to ignore discontinuity errors v2.33 * added full TS and M2TS support (file joining not supported yet, though) * further improved "-demux" file names * help text and HD DVD track listing is now also written to the log v2.32 * added automatic "VPLST000.XPL" and "HVA00001.VTI" parsing * "eac3to" or "eac3to ." inside of a HD DVD folder lists all title sets * "eac3to someHdDvdMovieFolder" lists all title sets * "eac3to someHdDvdMovieFolder whatever.mkv" converts the longest title set * "eac3to someHdDvdMovieFolder x) whatever.mkv" converts the selected title set * EVO report now contains the EVO display name (if "VPLST000.XPL" is available) * added language to EVO audio track listing (if "VPLST000.XPL" is available) * added EVO audio track display names (if "VPLST000.XPL" is available) * sequence end codes are stripped from VC-1, MPEG2 and h264/AVC * put "-stripPulldown" option back in on request * option "-demux" now writes to "current directory" instead of source directory * option "-demux" now creates files with meaningful names * doing "eac3to src.evo dst.mkv" now creates audio files with meaningful names * doing "eac3to src.evo dst.mkv" writes the audio files to same path as the MKV * after successful (erroneous) processing "success.wav" (error.wav) is played v2.31 * DTSWAV input support added * fixed bitstream delaying of 96khz DTS tracks * improved DTS runtime calculation * fixed DTS audio gap/overlap correction for strange DTS formats * fixed E-AC3 audio gap/overlap correction for strange bitrates * fixed incorrect MKV "default duration" when using "-24p" or "-30p" * fixed incorrect MKV "default duration" when using "-slowdown" or "-speedup" * improved support for "open bitrate" DTS files * slightly improved automatic (E-)AC3 delaying exactness v2.30 * fixed wrong MPEG2 framerate (bug introduced in v2.29) v2.29 * added automatic audio gap/overlap correction for (E-)AC3, DTS(-HD) and LPCM * options "-slowdown" and "-speedup" can now also be used for video muxing * added support for muxing of EVO's secondary video track to MKV * added "-24p", "-30p" and "-60i" options to overwrite detected h264 framerate * fixed some MPEG2 muxing problems * temporarily disabled "-stripPulldown" because vc1conv 0.3 is better v2.28 * new "-seekToIFrames" switch makes Basic Instinct (h264) muxing work v2.27 * fixed h264/AVC muxing crash with some movies (due to too high RAM usage) * fixed missing frames at the end of the movie when doing h264/AVC muxing * fixed non-working "eac3to -test" v2.26 * Haali Splitter replaced with internal splitter for EVO h264/AVC tracks * external raw h264/AVC tracks can now be muxed directly to Matroska * timestamps for h264/AVC MKV videos don't need to be rewritten, anymore * gaps/overlaps in h264/AVC track of EVO files are detected now * h264 aspect ratio is detected and written into MKV now * Haali Media Splitter is not being used at all, anymore * mkvtoolnix is not being used at all, anymore * added detection for MPEG2 interlaced -> progressive mode change * workaround for eacGui bug v2.25 * fixed MPEG2 muxing for interlaced content v2.24 * Haali Splitter replaced with internal splitter for EVO MPEG2 tracks * external raw MPEG2 tracks can now be muxed directly to Matroska * timestamps for MPEG2 MKV videos don't need to be rewritten, anymore * gaps/overlaps in MPEG2 track of EVO files are detected now * VC-1 and MPEG2 aspect ratios are detected and written into MKV now * fixed bug with "-down2" option v2.23 * fixed bug which made some DTS tracks appear dirty although they weren't * fixed extremely big gap detection with Fantastic Four 2 * fixed non cleaned up gaps file bug v2.22 * gap/overlap logic changed completely (optional two pass muxing now) * "-ignoreGaps" parameter is gone v2.21 * latest libav MLP/TrueHD decoder fixes "lossless check failed" bug * latest libav MLP/TrueHD decoder supports & decodes 7.1 TrueHD tracks * Matroska muxing speed dramatically improved * eac3to now detects and handles E-AC3 7.1 tracks correctly * option "-core" extracts 5.1 core from E-AC3 7.1 tracks * added support for small DTS files (< 300kb) v2.20 * changed VC-1 muxing method to fix problems with several movies, e.g. - Unforgiven - Phantom of the Opera - Million Dollar Baby - Fantastic Four 2 * fps value is now also added to MKV header when muxing raw VC-1 stream * added new "-skip" option to skip corruption in the beginning of an EVO file * added extra handling which fixes some EVO authoring bugs v2.19 * fixed h264 bitstream parsing of framerate information format * fixed (again) muxing of some rare VC-1 titles like e.g. POTO USA v2.18 * fixed bug which stopped eac3to v2.15-17 from working on some PCs * fixed h264 bitstream parsing bug (Sum of all Fears) * fps value is added to MKV header now * relaxed VC-1 gap detection once more * TrueHD decoding to stdout fixed (always output as 24 bit now) v2.17 * fixed VC-1 pulldown removal * VC-1 pulldown removal must now be activated by the new option "-stripPulldown" * improved VC-1 gap/overlap detection * new option "-ignoreGaps" disables VC-1 gap/overlap detection * libav E-AC3 decoder background decoding removed again v2.16 * fixed "eac3to -test" crash * fixed "eac3to some.ddp some.wav" crash * made video gap/overlap detection a little more relaxed * WAV header is initialized to 4GB instead of 0GB (for stdout) * fixed incorrect "primary/secondary" text v2.15 * Haali Splitter replaced with internal splitter for EVO VC-1 tracks * external raw VC-1 tracks can now be muxed directly to Matroska * timestamps for VC-1 MKV videos don't need to be rewritten, anymore * some problematic VC-1 movies should mux fine to MKV now (e.g. POTO USA) * gaps/overlaps in VC-1 track of EVO files are detected and displayed now * pulldown can be removed from external raw VC-1 tracks now * pulldown is automatically removed when demuxing EVO VC-1 tracks now * updated to the latest revision of the libav E-AC3 decoder * some minor changes and bugfixes v2.14 * libav TrueHD decoder "end of stream" bug should be fixed now * fixed libav DTS decoder - subwoofer channels is properly decoded now, too * patched libav DTS decoder to output full 24 bit * updated to the latest revision of the libav E-AC3 decoder * when decoding E-AC3 with Nero, libav decoding is also executed at the same time v2.13 * added option to downmix multi channel audio to stereo * added support for VC-1 custom aspect ratios * added stdout output support v2.12 (thanks to Ron/drmpeg for all his help) * video resolution, framerate and mode (progressive/interlaced) are displayed * rewriting timestamps should now always write the correct framerate * after a full EVO/VOB processing the number of video frames is shown * EVO 16 bit and 24 bit LPCM demuxing supported now (need samples for 20 bit) * (E-)AC3 bitstream can be delayed now (similar to delaycut) * DTS bitstream can be delayed now (similar to delaycut) * DTS-HD High-Res and Master Audio bitstream can be delayed now * when demuxing bitstream audio tracks from EVO delay is automatically applied * some little bugs fixed v2.11 * libav E-AC3 decoding is without DRC now * libav AC3 decoding added (without DRC) * libav E-AC3 and AC3 decoding hacked to return full 24 bit * fixed: delay was not applied for lossless audio tracks * fixed crash when parsing PCM files without doing any conversion * TrueHD dialnorm was displayed incorrectly * changed 23.976 to 24/1.001 * fixed some more minor bugs v2.10 * fixed crash which occurred when doing "EVO/VOB -> Surcode DTS encoding" * "eac3to source.evo movie.mkv" syntax replaces "-auto" option * "eac3to 1.evo+2.evo movie.evo" syntax supported now for simple EVO/VOB joining v2.09 * EVO demuxing added with proper delays for all audio tracks * EVO file joining/rebuilding added * automated EVO video remuxing (Matroska) added * automated rewriting of Matroska timestamps to 24p via mkvtoolnix added * multiple operations on the source file can now be run at the same time * switch "-test" tests all external DirectShow filters and tools * latest ffmpeg/libav TrueHD and E-AC3 decoder patches included * latest libAften build included * libav TrueHD decoder is now the default decoder for TrueHD/MLP * support for libav DTS decoding added * fixed a whole lot of bugs (and might have added a few new ones) v2.08 * fixed: bitdepth reducer sometimes crashed when being fed a PCM file * fixed: FLAC encoder sometimes crashed when delay was applied * fixed: some TrueHD files were dithered/processed by Nero when they shouldn't * fixed: Surcode 1.0.29 encoding automation * fixed: source file was deleted when source and dest file names were identical * eac3to output is now always written to "log.txt" * when a crash occurs, "log.txt" is added to the bug report * improved help text + hints slightly * undocumented switch "-check16bit" added * undocumented switch "-mono" added v2.07 * fixed libAV MLP decoding support * added automatic MLP ID20 channel remapping * Surcode 1.0.29 (or newer) home directory detection added v2.06 * doing FLAC -> FLAC now copies metadata from source to destination file * MLP files are correctly decoded now (by both Nero and libav/ffmpeg) * runtime for padded DTS files is shown correctly now v2.05 * added support for libav/ffmpeg decoding of TrueHD/MLP and E-AC3 * added "-libav" switch to force libav decoding v2.04 * don't need dtsac3source.ax, anymore * don't need Nero Splitter, anymore * don't need Sonic HD Demuxer, anymore * replaced hacked DirectShow feeding with a cleaner approach * added support for DTS-HD Master Audio 7.1 tracks (only 5.1 decoding) * little performance boost for PAL speedup/down on DualCore CPUs * fixed some bugs v2.03 * new "-debug" switch added v2.02 * fixed: automatic registering of the dtsac3source filter crashed v2.01 * fixed: AC3 encoding sometimes crashed when being fed 24 bit audio data * fixed: AC3 encoded files were invalid when being fed 24 bit audio data * eac3toGUI didn't work with eac3to v2.0 * "eac3to source.ac3 dest.ac3 -slowdown" didn't do anything useful * when a crash occurs, the bug report is automatically copied to clipboard now * some minor cosmetic improvements v2.00 totally new features * AC3 decoding support (Nero's decoder without DRC/dialnorm) * resampling to 44.1/48/96 kHz (by using "r8brain") * apply/reverse PAL speedup (by using "r8brain") * "eac3to sourceFile" will print out source file details strongly enhanced features * dramatically improved performance (no intermediate files, anymore!) * proper 6.1/7.1 downmixing to 5.1 instead of just dropping the back surround channels * RAW/PCM file detection now auto detects channels, bitdepth and endian * WAV is now fully supported as source file format * destination file extension "PCM" creates Blu-Ray style LPCM tracks * bitdepth can be reduced to anything between 14 bits and 23 bits DTS related improvements/changes * DTS-96/24 support added * "open bitrate" support added * strange channel configuration support added * removal of zero padding from DTS files added * eac3to can fix broken DTS-ES files (they decode to 5.1 instead of 6.1 without the fix) * dialog normalization can be removed without removing the additional DTS-HD data now * core extraction must be specifically asked for now (see "-core" switch) AC3 related improvements * did I mention that eac3to can decode AC3 now? * strange channel configuration support added TrueHD related improvements * delay problem (hopefully) solved * fixed: sometimes some audio data in the middle of a track was lost * TrueHD/AC3 interweaved file can be stripped to TrueHD only now various minor improvements/changes * progress bar added * eac3to detects file format independently of file extension * multiple input files can be treated as one big file * "sox" is not needed, anymore * "dump" filter not needed, anymore * "aften.exe" replaced by "libAften.dll" * "flac.exe" replaced by "libFlac.dll" * DTS/DD+/AC3 source filter ships with eac3to now * 8bit support added * crash analyzer and bug reporting added v1.23 * bugfix: sometimes TrueHD decoding resulted in incorrect sampling rate v1.22 * 6.1 -> 7.1 channel doubling was sometimes incorrectly skipped * OS speaker settings now don't have to be 7.1, anymore * added detection of 5.1 output when 6.1 was expected * DTS and DTS-ES files are now forcefully patched to 24 bit by eac3to (workaround for Sonic decoder) * Sonic Audio Decoder is now always used by default for DTS decoding v1.21 * bugfix: 2 channel DTS files were not accepted * added: DTS-ES 6.1 support * added: DTS-HD High Resolution Matrix 5.1 support * added: DTS-HD Master Audio 6.1 support v1.20 * bugfix: some Blu-Ray TrueHD tracks were not accepted * change: eac3to output text slightly improved v1.19 * bugfix: still some TrueHD files were not accepted ("The source file format is unknown") * added: FLAC supported as source/input file format now * added: full delay functionality v1.18 * bugfix: some TrueHD files were not accepted ("The source file format is unknown") * change: EVO files are not accepted as source files, anymore * added: detection and repacking of 16 bit TrueHD tracks * added: proper detection of "DTS-HD Master Audio" and "DTS-HD High Resolution" tracks * added: runtime information for "DTS-HD High Resolution" tracks * bugfix: bitrate information for "DTS-HD High Resolution" tracks * added: decoding of "DTS-HD Master Audio" tracks (Sonic) * added: decoding of "DTS-HD High Resolution" tracks (Sonic) * added: decoding of conventional DTS tracks (Sonic/Nero) v1.17 * TrueHD dialog normalization removal added v1.16 * added decoding support for Blu-Ray TrueHD files v1.15 * bugfixes v1.14 * DTS dialog normalization can be removed now * DTS core can be extracted from DTS-HD track now v1.13 * "eac3to src.ac3 dst.ac3" removes dialog normalization from AC3 files * "eac3to src.eac3 dst.eac3" removes dialog normalization from E-AC3 files * "eac3to src.thd dst.ac3" extracts the AC3 frames from a Blu-Ray TrueHD track and removes dialog normalization v1.12 * tools "flac.exe", "aften.exe" and "sox.exe" are now distributed in the eac3to zip * correct channel mapping for 7.1 LPCM tracks is default now * new option "-down6" allows downconverting of 7.1 tracks to 5.1 * modded "flac.exe" ships with eac3to now, which has no problems with 2GB file output, anymore v1.11 * bugfix: (L)PCM -> DTS encoding automation failed when source and destination folders differed * added: new "-allowDnr" switch allows Nero's audio decoder to apply DNR * added: new "-keepDialnorm" switch disables removal of E-AC3 dialnorm information v1.10 * E-AC3 dialog normalization detection and removal * DRC turned off for Nero E-AC3 decoder * Surcode automation improved * Nero is now the default E-AC3 and TrueHD decoder * the flag "/nero" is no more * there is a flag "/sonic" now to force the use of the Sonic filters v1.09 * multi channel mono wav output added * automated SurCode DTS encoding added * 24bit PCM handling works now (was buggy before) * "-blu-ray" option removed * with PCM input files "bigendian" is default now * with 5.1 PCM input blu-ray style channel remapping is default now * switches "-16" and "-24" are valid for both TrueHD and PCM input now * eac3to now creates the WAV files on its own instead of using sox * target extension ".wavs" results in one mono wav for each channel being created * SurCode DVD DTS encoding automation added * new options "-768" and "-1536" for DTS encoding * TrueHD output is not downconverted to 16bit by default, anymore * new option "-down16" downconverts the raw data from 24 -> 16 bit (not limited to TrueHD input) v1.08 * added PCM input support * automatic detection of PCM bitdepth added (16bit or 24bit) * "-blu-ray" switch remaps PCM channels correctly v1.07 * added "-8" switch for 8 channel support v1.06 * mono E-AC3 support added v1.05 * support for 5.1 TrueHD audio tracks added v1.04 * E-AC3 files bigger than 4GB are supported now v1.03 * AC3 files bigger than 2GB are supported now v1.02 * FLAC encoding works now without any input/output size limits v1.01 * support for FLAC encoding added * bitrate can be specified via command line parameter * ffdshow removed from the filter chain * "ddp" and "ec3" file extensions are accepted now, too * fix: "dd+" file extension didn't work correctly. v1.00 * initial release * can convert a 2.0 or 5.1 channel E-AC3 file to AC3.
Quartus_II使用教程
Quartus使用入门及一些实验经验 Maxplus主要是教学使用，对于一般的教学需求，Maxplus软件可以很好的满足要求了， 但是为了以后学习的需要，还是得尝试学会使用更加专业的软件，比如Altera公司的Quartus 软件。 Quartus软件是Alter公司提供的FPGA/CPLD开发集成环境，Altera公司是世界上最大 的可编程逻辑器件供应商之一。Quartus是Maxplus的更新替换产品，其界面友好，使用方 便。在Quartus中可以完成设计输入，HDL综合，布线布局（适配），（前）仿真，下载等测 试。 Quartus软件主要有网页版订购版，都可以从Altera公司的网站上下载到。网络版相比 订购版只是少了一点小小支持，但是对我们的实验是没有任何影响的。本人使用的是Quartus 9.0订购版，大家可以在网络上查找下Quartus的crack来生成license，一般流行的都是俊龙 提供的。如果在网络上没有找到的话可以发我邮箱（yuanpuhao@gmail.com）索要。 关于Quartus软件的使用，及FPGA后续学习，个人推荐一本书《基于Alter FPGA/CPLD 的电子系统设计及工程实践》。湖大图书馆藏有这本书，是一本很好的入门书籍，图书馆藏 编号为：TP332.145。里面很详细介绍了Quartus的使用入门及一些简单的工程的建立流程， 等一些知识。 Quartus软件破解完成后，进入Quartus软件，界面如图1.（第一次登陆使用会让你选 择使用Quartus风格还是Maxplus界面风格） 图1 更具个人使用爱好，自己取舍界面需求，一般建议使用standard Quartus。在工具栏 工具栏 空白处右击，然后选择custom，然后显示如图2，选择标签toolbars，勾选standard Quartus， 确定。 图2 在custom里面有很多选项，如果都想了解，可以自己都去点选试试，那些英文都很直 观的告诉了用户对应的风格选项。 自己可以在工具栏直接右击后选择哪些显示，哪些不显示，当然那也可以通过菜单栏中 的view—>utility windows中选择。 利用快键按钮或者快捷键，可以节省自己很多操作，使自己的使用更加方便。 软件的用户界面都是很友好且相似的，Quartus的工具栏和菜单栏的使用和word是很相 像的，连新建，保存，另存为图标的样子都一样。 每一个设计项目都是以工程为单位的，里面可以包含设计图，波形图，管脚绑定，芯片 选择等信息。（就如同vc软件的工作空间这个概念） 点选工具栏中的new，新建一个工程。 接下来就是设置工程的一些基本信息。 输入完工程名字后，点选next。如果所在的文件夹下还有其他工程，Quartus会显示提 示信息，自己阅读后进行选择。 当然也可以直接点选finish，在后续的设计中，可以通过菜单栏中的Assignment进行修 改，如Device选项，修改使用的器件。 接下来是在工程中添加文件，比如自己曾经设计好的VHDL源码，原理图等或者库之 类信息。如果不要添加任何文件，直接选择next。 接下来就是器件芯片的选择。 更具实验箱上的芯片进行选择。在Device family中选择Cyclone，在Available devices 中选择EP1C6Q240C6。 点选next，让自己选择第三方软件，如ModelSim，Synplify等，不做任何修改，直接 next，最后finish，整个工程配置完成。 当我们以后再建立工程的时候，由于我们下载使用的芯片都是一样的，工程的基本信息 都是一样的，我们可以使用先前的工程的settings。 在输入工程name的时候，点选use existing project settings，选择指定的工程settings或 者上一次的工程settings，然后直接点选finish，省去了每一次新建工程都需要选择器件。 图3 建立完工程后，假使我们使用原理图的设计方案，因此新建一个block diagram，如图 4. 图4 如果我们设计一个16位计数器，选用74163芯片来制作一个简单的16位计数器。 在bdf文件的空白处双击然后在name选项中直接输入芯片名称。 插入input，output 后，连接进行布线。光标移动到线的一段后就会自动变成十字形， 表示可以进行线输入，连接完线后，如图5. 图5 为了显示清晰，可以将一些功能相同的线或者输入输出合并，即利用总线。比如将输出 端QD,QC,QB,QA合并。先将输出端连出线，然后给各线命名。直接点选中线后从键盘输入 可以看到每条线都有了自己的name。 每条线有了name后可以方便很多，比如我们进行连线的时候，就可以不必每次将需要 相连的线连上，只需取上相同的名字，编译的时候编译器就知道这些线是相连的。因此如果 采用命名的方式连接，一定要注意线的命名，不要使得不相连的线命名相同，这样就会导致 错误，请注意Quartus的编译器是不区分英文大小写的。 如果是进行总分线连接，则一定要按照规定命名。在首先分线的名字一定要一样，然后 表示哪条分线的数字一定要用[ ]括起来，否则编译无法通过。该实验中命名为 Q[0],Q[1],Q[2],Q[3],因此总线应为Q[3..0]或者Q[0..3]。最后连接一个输出端，其中输出端命 名也要注意宽度，和总线宽度保持一致。并注意输入输出端的和总线的顺序，比[3..0],[0..3] 对应是不一样的，为了自己使用的方便，一定要养成自己的总线，输入输出命名方式风格， 个人建议全部从高到低命名，并使得最低位为0，这样符合数字电路的习惯，如本例中8位 总线命名为Q[7..0],输出命名为Q[7..0]。 如果这只是自己设计的一个模块，自己可以试着将该文件编译一下。本例中memory是 顶层设计图，如果要单独编译该设计图，应点选project——set as top-level entity。如图8. 图8 点选编译的快件按键，鼠标移上去会显示：Start compilation。 对这一自己设计的芯片进行打包。点file——create——create symbol file for current file， 如图9. 图9 生成一个和设计图名字一样的bsf文件，即为打包的芯片。 在memory设计图中，双击空白处，输入cdu16（名称为刚才自行设计模块的文件名） 就可以调出自己打包的芯片，也可以双击后在project中点选，如图10. 图10 电路设计完成后，就是在此编译了，如果前面点选了别的文件为top-level entity不要忘 了设置下，把memory设为top-level entity。 在原理图的设计时，自己可以尝试用用工具栏中的各种辅助工具，比如注释工具，使得 自己的原理图更加直观易懂，如下图。 其中观察的zoom in，zoom out选项，单击是zoom in，按住shift后单击是zoom out， 当然直接右击就是zoom out，这和后面波形仿真中观察波形是一样的。 进行波形仿真，验证设计的正确性。新建一个vector waveform file，如图11. 图11 个人比较喜欢把设计图，波形图等界面单独显示，利用自己电脑windows7系统的预览 功能，切换起来十分方便，便于观察。点detach window，就可实现，如图12. 图12 然后在edit里面编辑end time和grid size。如图13. 图13 在左边name一栏双击,如下图。 点选node find。 第一次的时候有可能需要设置Filter中为Pin：all。 点选List，列出所有Pin。 选择Nodes Found中到Selected Nodes。（利用两者直接的四个按钮可以方便传送，删除） 完成后，如图14（此图我已经进行过波形仿真，顾不是原始的波形图） 图14 自己开始进行波形仿真。其中会发现总线上的信号D0,D1等信号左边符号显示的是io， （D0,D1本来的属性就是IO）这个问题后面再说。左边工具栏的功能，自己一个个点点试 试就知道什么功能了，很容易上手。第一次做波形仿真的时候有可能会遇到无法点选珊格， 需要自己小心意义，选满珊格，其实是没有勾选snap to grid。在工具栏倒数第二个键就是此 功能键，当然也可以在view里面选择，如图15. 图15 将一些类似的信号进行合并，一起选中后右击，点选group，进行合并或者拆分。在对 一些信号合并的时候，个人使用Quartus有个小瑕疵，不能命名为SW R1 R2 R3 BUS，这样 的信号名，有空格或者“【”等符号都会显示illegal node name。 对于那些名称很类似的信号合并，由于你需要重新排序，可以点工具栏最后那个按钮， 看英文你就知道选按照升序或者降序排列，默认的是升序，由于波形仿真需要一般都选 descenting。 点选波形仿真的快捷键。 波形仿真中有个需要注意的是，波形图的名称一定要与你所在的工程名相同。因为波形 仿真是和编译后的文件关联的。因此如果你在设计16位计数器的时候进行了波形仿真来测 试是否符合要求，如果想保留此波形图，请save as其他名称，因为后面进行memory的波 形仿真图的时候，会把原图覆盖。如果不取和工程名相同名称的波形图名称，将无法进行波 形仿真。 波形仿真完后，出来一个类似波形仿真对话框的界面，他的label 名称为：simulation如 图16. 图16 会发现该波形图比原波形图多出了8个信号，正好与原来波形图中的双向信号对应，只 是多了个后缀result。这正是你要总线输出信号。你可以试着去修改波形图（其实修改不了， 所以我一般随便双击一段波），会弹出对话框如图17. 图17 点选I want那个选项。然后出现一个对话框，点yes，发现自己创建的波形图变了。两 个英文对话框的意思就是我要重修原来的input file，你点了修改了，系统检测到你点波形图 已经改变了，因此询问你是否替换成修改后的波形图，点yes后就发现自己原来的波形图上 也多出了那几个信号。将这些信号排序组合，命名，如图18. 图18 你会发现波形仿真的结果原来的总线信号还是处于高阻态信号，后来出现的信号显示了 你预期的结果。这个时候注意，原来那些高阻态的信号不能删除，如果删除波形仿真会出错。 （不信可以自己试试，到底哪里会错误）为了避免影响自己观察，既然已经将他们打包了， 把他们放在波形仿真末尾，不碍着自己。 在设计的过程中，如果通过波形仿真发现问题错了，得修改电路图。如果没有改变顶层 的输入输出，如只改变了内部连线，则直接点波形仿真好了，不用再次重新建立波形仿真图。 同样，如果打包的芯片内部连线改变了，只用去修改下内部的连线就可以了，重新编译一下。 但是如果某个打包的芯片需要改变输入输出，那么只能将该芯片重新create symbol file for current file了，将原来的bsf文件覆盖了。不然编译的时候会显示被改变的输入或者输出端 与原来的不符合。在顶层芯片图中，也需要右击该芯片，然后选择update symbol or block。 如图19. 图19 三个选项自己英文都能够看懂，更新后引脚的位置有可能改变了，自己需要注意下，然 后重新连接正确。重新编译。 得到正确的波形图后，写实验报告的时候需要对波形图进行说明，此时点选A工具， 进行注释十分方便。 波形仿真正确后，需要进行下载电路的设计（有些图甚至不需要添加外围下载电路）， 然后进行只需进行管脚绑定了。 点选Assignment->Pin Planner 只需在管教的location 选项直接输入管教的数字，就可以很简单的绑定了。 管教绑定后结果如图20. 图20 管脚绑定完再次编译，自己可以看到原来的设计图中的输入输出旁边都会显示已经绑定 好的管教，非常直观，便于自己观察。如图21. 图21 下载： 点选tools->Programmer 第一次有可能使用Hardware Setup。（本人使用的USB下载，写此文时未接上所以显示 No Hardware。实验室的下载线使用的都是并口下载线（有个学长做好了USB下载线，不知 道有没有广泛使用）。Mode选择JTAG，选中sof文件后就可以start了。） 关于下载的一些经验： 每个人都有自己的下载习惯，根据我们实验需要，我们可以养成自己的下载习惯。由于 下载需添加下载电路，万一我们要仿真原来的设计图就显得麻烦了，因此个人建议，在工程 所在的文件夹下再次新建一个工程，然后将原来的设计文件全部add all进去。（在工程建立 的时候那个add file步骤，也可以点选Project->Add/Remove Files in Project进行操作）如图 22 图22 将原来的顶层图打包，作为下载的一个模块，然后添加下载电路。如下图所示： 由于我们下载经常要用到一些下载辅助模块，如扫描电路，消抖电路，7端译码器，可以专 门新建一个文件夹保存这些设计文件，然后在Project中add就可以。然后依次生成对应的 bsf文件（即打包,bsf 文件必须在工程所在的文件下），添加到下载电路中。 管脚绑定也可以利用tcl 命令来完成，我们做实验的时候要反复用到数码管的下载，数 码管的绑定每次都是一样的，而且我们都是用自己设计的扫描电路和7段译码器，因此我们 可以利用tcl命令来简化我们自己的绑定。一种比较省事的办法就是在第一次使用Pin Planner 后，点选file->export,导出文件类型选择tcl。 查看tcl 文件，我们可以看到里面的信息如下： # Copyright (C) 1991-2009 Altera Corporation # Your use of Altera Corporation's design tools, logic functions # and other software and tools, and its AMPP partner logic # functions, and any output files from any of the foregoing # (including device programming or simulation files), and any # associated documentation or information are expressly subject # to the terms and conditions of the Altera Program License # Subscription Agreement, Altera MegaCore Function License # Agreement, or other applicable license agreement, including, # without limitation, that your use is for the sole purpose of # programming logic devices manufactured by Altera and sold by # Altera or its authorized distributors. Please refer to the # applicable agreement for further details. # Quartus II Version 9.0 Build 132 02/25/2009 SJ Full Version # File: E:\code\computer system\cpu design\result\memory\mem_download.tcl # Generated on: Thu Dec 24 19:08:02 2009 package require ::quartus::project set_location_assignment PIN_184 -to q[2] set_location_assignment PIN_183 -to q[1] set_location_assignment PIN_182 -to q[0] set_location_assignment PIN_29 -to scan set_location_assignment PIN_186 -to y[6] set_location_assignment PIN_187 -to y[5] set_location_assignment PIN_188 -to y[4] set_location_assignment PIN_193 -to y[3] set_location_assignment PIN_194 -to y[2] set_location_assignment PIN_195 -to y[1] set_location_assignment PIN_196 -to y[0] set_location_assignment PIN_116 -to CLR_INDATA set_location_assignment PIN_115 -to EN_INDATA set_location_assignment PIN_152 -to CLK_COUNT set_location_assignment PIN_117 -to 161ar set_location_assignment PIN_105 -to 161pc set_location_assignment PIN_118 -to ldar set_location_assignment PIN_28 -to H set_location_assignment PIN_107 -to pcclrn set_location_assignment PIN_108 -to memenab set_location_assignment PIN_113 -to rd set_location_assignment PIN_114 -to we set_location_assignment PIN_106 -to pcload set_location_assignment PIN_123 -to pc_bus set_location_assignment PIN_124 -to sw_bus set_location_assignment PIN_122 -to reset set_location_assignment PIN_64 -to T3 保留我们所要的下载信息： package require ::quartus::project set_location_assignment PIN_184 -to q[2] set_location_assignment PIN_183 -to q[1] set_location_assignment PIN_182 -to q[0] set_location_assignment PIN_29 -to scan set_location_assignment PIN_186 -to y[6] set_location_assignment PIN_187 -to y[5] set_location_assignment PIN_188 -to y[4] set_location_assignment PIN_193 -to y[3] set_location_assignment PIN_194 -to y[2] set_location_assignment PIN_195 -to y[1] set_location_assignment PIN_196 -to y[0] 以后每次进行下载的时候，只需在Project中添加该tcl 文件，然后点选菜单栏tools->Tcl Scripts 然后选择Project中的那个tcl 文件，点选Run，即运行下这个tcl 命令。当我们去查看 原图的时候，会发现那几个数码管的下载管教已经成功绑定了。其余的利用Pin Planner可 以快速绑定。 p.s：一些补充的内容 1.关于Quartus使用 去图书馆借阅一本Quartus的书，很多书籍都有介绍如何入门使用，而且写的很详细。要学 会充分利用图书馆的书籍资源。 Quartus的使用和其他软件一样，完全是孰能生巧。比如放大缩小，自己可以使用鼠标的单 击，右击，其实还可以通过ctrl键和鼠标的滚轮结合使用。如果你不知道某项操作，一种方 法是在他人寻求帮助，找有经验的人，而Google恐怕是每个人最好的老师。还有一种办法 就是自己去尝试。毕竟很多软件做的都是很人性化的，作者设计的软件是很为用户考虑的， 而且通过那些选项的英文提示，我们就很容易完成我们所设想的事情。比如要用到建立mif 文件，你会发现无法填入16进制数，他会提示你请输入十进制的数，这个时候就知道他默 认的是10进制，因此你第一个想到的就是采用16进制，自己右击一下就会发现有地址和内 容的16进制选项了，我们要学会自己去尝试，一个软件很大，不可能全部由别人来告诉自 己怎么使用，自己也会养成自己使用软件的习惯和窍门。 2.HDL语言 实验中的下载模块，我们尝试着使用VHDL或者Verilog来完成设计，你会发现很简单使用。 不管是使用原理图还是HDL语言，我们都可以在顶层框图导航，右击 locate in RTL viewer， 查看编译后的RTL图。为了进一步学习，应当熟练掌握HDL描述语言，在工业界以Verilog 占主导地位。查看RTL如下： 选择完后显示如下： RTL查看的好处有很多，很方便自己排错，如果你是图形输入，可以很轻松的检查线是否 存在连接错误。（光标移动到某根线就知道为什么了） 3.例化原件 本人做的时候也遇到过这种问题，自己在使用VHDL完成课程设计的时候，自己使用语言 写了一个存储器，结果编译的时候过了，但是综合的时候出错，显示逻辑单元不够，在后来 的学习当中，知道了这个是Quartus综合工具的问题，因为他不够智能。在我们每次编译完， 我们可以看到编译信息，使用了多少逻辑单元，使用了多少存储资源。Quartus综合的时候 将我们的语言使用逻辑单元来实现，因此逻辑单元被全部用光。解决的办法有两个：使用第 三方综合工具，例化原器件。 点选菜单栏的tools->MegaWizard Plug-in Manager，如下图： 会显示对话框如下： 点选next 在左边的方框中选择Memory Compiler->RAM:1-PORT，右半部分第一个是Cyclone芯片选 项，自己选不同的Device family可以看到左边有些资源就不可以例化，因为每个芯片的ip core不一样造成的，比如我们的Cyclone芯片就有两个pll让我们调用，第二个选项选择例 化语言：VHDL，AHDL，Verilog HDL，然后选择例化后的文件名极其位置，点选next，进 行存储字的大小，线宽等选项。 可以如果还需要更加详细的参数设置，只需next下去，当然可以直接finish，利用默认的参 数。 我们可以看到可以有很多原件可以让我们调用，就如同图形输入的元器件库。 4.第三方软件 当我们熟练掌握了使用Quartus后，可以试着尝试使用第三方软件来完善我们的工程， 有些第三方软件确实比Quartus自带的工具强大，如用于仿真的Modelsim，用于综合的 Synplify，而且这些软件和Quartus软件都能很方便的配合使用。 新建工程的向导当中就有一步是选择第三方软件，我们起初选择的默认参数，即都没有 使用，当我们熟练使用后就可以试着通过调用第三方软件来实现。 ModelSim可以进行前仿真，也可以进行后仿真。（前仿真即功能仿真，不考虑延时等器 件性能，后仿真即模仿实际情况的仿真，Quartus也可以实现，在仿真的opinion选项里有勾 选是否考虑器件等因素），ModelSim的仿真功能还是很强大的。 Synplify软件是一款很流行的综合软件。就比如前面的存储器，如果自己用语言描述， Synplify的综合就知道调用存储单元来实现该功能，Synplify的好处有很多，对于逻辑资源 的节省是其一大特色。Quartus的编译，综合 完成后会显示消耗的资源，如果通过Synplify 综合，逻辑资源有时候能节省很多。Synplify软件和Quartus软件能够很好的配合使用，可 以通过Synplify软件调用Quartus软件，也可以通过Quartus软件调用Synplify软件。
Visual C++ 编程资源大全（英文源码 表单）
1,01.zipMFC Extension LibraryMFC扩展界面库, 使用Visual C++ 6.0(15KB)2,02.zipVisual Studio style UIVisual Studio风格的界面效果(15KB)3,03.zipInternet Explorer 4 style UIIE4.0风格的界面效果(29KB)4,04.zipOutlook Style UIOutlook风格的界面效果(16KB)5,05.zipDynamic child window repositioning动态改变对话框的大小, 对话框中的控件相应改变(15KB)6,06.zipEnhanced list control增强的List控件(43KB)7,07.zipCDialog using animated control在CDialog中使用动画(12KB)8,08.zipOpen Dialog with Bitmap Preview位图预览的打开文件对话框(43KB)9,09.zipStandard file open dialog with preview标准位图预览的打开文件对话框(24KB)10,10.zipBitmap Dialog Class位图对话框类(13KB)11,11.zipClass for Browsing shell namespace with your own dialog显示目录的树型结构, 可用于目录的选择(31KB)12,12.zipUsing ON_UPDATE_COMMAND_UI with dialogs在对话框中使用ON_UPDATE_COMMAND_UI(13KB)13,13.zipUsing ON_UPDATE_COMMAND_UI with dialogs (2)使用ON_UPDATE_COMMAND_UI(11KB)14,14.zipModeless child dialog in a Main Dialog with corrected tab order非模式对话框在主对话框中的TAB顺序(21KB)15,15.zipCostumizing CFileDialog定制的CFileDialog(22KB)16,16.zipAttaching Elements to Borders一个可以在对话框中改变按纽位置、大小的容器(26KB)17,17.zipScrolling credits dialog滚动信用对话框(12KB)18,18.zipColor Dialog with Persistent Custom Colors对话框继承了上一次的颜色风格(12KB)19,19.zipA Base Dialog Class for Modal/Modeless Dialog with Custom Background Color自定义背景的对话框(13KB)20,20.zipParse IP addresses解析IP地址(12KB)21,21.zipParse phone fields解析电话区域(11KB)22,22.zipChanging the default file open/save dialogs in an MFC doc/view application初始化对话框和支持动态数据交换(DDX)(15KB)23,23.zipDialog with Splash Screen Example Code...Splash对话框的例子(18KB)24,24.zipClass to select directory选择目录的类(13KB)25,25.zipClass to select directory (Enhancements)增强的选择目录的类(12KB)26,26.zipDirectory Picker Dialog目录采集对话框(42KB)27,27.zipSimple way to change dialog's background and text colors改变对话框背景颜色和文字颜色的简单途径(11KB)28,28.zipA Simple Dialog Layout Manager一个简单的对话框设计管理器(19KB)29,29.zipUsing Buttons on a Dialog Bar with CCmdUI通过CCmdUI在对话框条中使用按纽(19KB)30,30.zipDisplay help for dialog controls on the status bar在状态条中显示对话框中控件的帮助信息(12KB)31,31.zipDragging a dialog by clicking anywhere on it点击任何地方拖动对话框(11KB)32,32.zipSplash screen with text on it that uses its own thread通过自己的线程在Splash对话框中显示文字(136KB)33,33.zipCreating an expanding dialog创建一个可扩展的对话框(15KB)34,34.zipExpanding/Contracting Dialog Box扩展/缩小对话框(24KB)35,35.zipCFileDialog class that only displays folders让CFileDialog只显示目录(很有用)(2KB)36,36.zipFolder Browsing Dialog目录浏览对话框(3KB)37,37.zipFont dialog with custom text preview & color字体对话框中增加字体和颜色的预览(12KB)38,38.zipEmbedding an HTML Help window into a dialog嵌入一个超文本(HTML)的帮助窗口到对话框中(22KB)39,39.zipDialog which can be used as MDI child window使用MDI子窗口的对话框(13KB)40,40.zipConvert modal dialogs to modeless将模式对话框转换成非模式对话框(12KB)41,41.zipNetscape 4.x Preferences Dialog类似Netscape 4.x参数选择的对话框(7KB)42,42.zipHandling OnUpdate() processing for menu itemsOnUpdate()处理菜单项(5KB)43,43.zipOptions Tree Dialog树状的配置对话框(25KB)44,44.zipCustomizing the font dialog定制的字体对话框(4KB)45,45.zipSizable dialogs at its easiest轻松改变对话框的大小(5KB)46,46.zipA Snap Size Dialog Class一个捕获对话框大小的类(5KB)47,47.zipCSplitterWnd in a Dialog based Application一个基于对话框的应用(6KB)48,48.zipSplash Screen with 256 color support支持256色的Splash对话框(7KB)49,49.zipSubselection Dialog 子项选择的对话框(5KB)50,50.zipSwitching dialog boxes in a dialog-based application在基于对话框应用中切换对话框(5KB)51,51.zipBetter Tip of the Day dialog典型的Did you konw...对话框(26KB)52,52.zipToolbars and Statusbars on Dialogs在对话框中增加工具条和状态条(7KB)53,53.zipTooltips in modal dialog boxes在模式对话框中实现工具提示(6KB)54,54.zipTooltips for dialog controls实现对话框控件的工具提示(4KB)55,55.zipTransparent Dialog透明的对话框(5KB)56,56.zipViewing Dialog Template Resources at Runtime运行时看对话框模板资源(5KB)57,57.zipAlternative Wizard Dialog一个Wizard对话框, 在安装程序中也有用(5KB)58,58.zipAVLTree实现AVL(Addison-Velski and Landis)树结构(5KB)59,59.zipTemplate class to manipulate bits of undefined type一个操作未知类型的模板库(5KB)60,60.zipBlowfish EncryptionBlowfish加密算法加密(4KB)61,61.zipBlowfish encryption classBlowfish加密类(5KB)62,62.zipExpression Evaluation数学公式识别类(5KB)63,63.zipA Y2.038K-Safe Replacement for CTimeCTime的替换类(5KB)64,64.zipIterating through List Containers关于List容器的话题(5KB)65,65.zipLexical Analyser词汇分析(8KB)66,66.zipLocales and Facets in Visual C++VC++的许多细节话题(10KB)67,67.zipA Generalized Parsing Class for MFC一个普通的MFC解析类(5KB)68,69.zipCreating Singleton Objects using Visual C++使用VC++创建一个单独的对象(9KB)69,69.zipSmart Pointers and other Pointer classes指针类(5KB)70,70.zipSortable CObArray class对CObArray类排序(5KB)71,71.zipSortable CObList class对CObList类排序(6KB)72,72.zipExtension to the STL find_if and for_each扩充STL库(5KB)73,73.zipChange from child window to popup window (and back) 将一个子窗口改成弹出式窗口(5KB)74,74.zipRestoring Window Position With Multiple Monitors在多层监视器中恢复窗口的位置(5KB)75,75.zipTransparent Window透明的窗口(6KB)76,CenterMDIWnd_demo.zipCenter CMDIChildWnds in the client area of the main frame window(151KB)77,TabbedMDI.zipA variation on the MDI that indicates the open child windows in a tab control. (400KB)78,AdvancedPrev.zipA simple class that helps provide faster Print Preview within MFC Doc/View applications(38KB)79,mditab.zipA dockable bar containing a tabbed list of open windows(91KB)80,CloseUnusedDocs_src.zipClosing unused MDI documents with 1 line of code(2KB)81,graphfx_demo.zipA Doc/View framework for displaying graphical data(192KB)82,WindowsManager.zipImplementing "Windows..." dialog(39KB)83,MultiMRUList_src.zipThis article describes how to maintain the separate MRU list for each document type that is needed in some applications(26KB)84,MultiTop.zipAllows an application to have multiple top-level windows. (22KB)85,PersistFrames.zipA collection of classes that allows MFC SDI and MDI applications to remember the positions and sizes of their main frame and child frame windows. (71KB)86,step0.zipA series of articles that resulted from experimenting with adding Drag and Drop features to my existing application. (16KB)87,undo.zipEasily add Undo/Redo to your CDocument/CView Based Applciation(2KB)88,PropertyView.zipA "Property Sheet"-like view class for MFC (108KB)89,DocViewWTL.zipA library that provides the easiest way to get loosely coupled components. (156KB)90,Dialog2.zipA step by step tutorial showing how to create your first windows program using MFC(112KB)91,MyMDIApp.zipA brief step-by-step tutorial that demonstrates creating an SDI and MDI based applications using the MFC Doc/View architecture.(54KB)92,sditutorial_demo.zipA brief step-by-step tutorial that demonstrates creating an SDI based application that does not use the MFC Doc/View architecture.(15KB)93,QuickWin.zipRedirect stdin, stdout and stderr into a window(125KB)94,GradientTitleBar.zipThis article shows you how to give your Win95/NT4 modeless dialogs a Win98/W2K like gradient title bar.(42KB)95,MsgBoxDemo.zipThe system Message Box that is closed atuomatically after some time(21KB)96,step1.zipSimple step by step article explaining how to create a modeless dialog box as child window.(21KB)97,step2.zipSimple step by step article explaining how to create a modeless dialog box as sibling of the app's main window.(22KB)98,ResizableDialog.zipA CDialog derived class to implement resizable dialogs with MFC (98KB)99,CenterAnywhere_demo.zipThis is a good replacement for CWnd::CenterWindow() that works. (43KB)100,CardDialog.zipA auto-sizing dialog used to store and display smaller child dialogs(22KB)101,scrolling_credits.zipA Scrolling Credits Dialog(209KB)102,snapdialog.zipDialog class that implement a snap-to-screen-border feature like Winamp(16KB)103,messagebox.zipA class which encapsulates MessageBoxIndirect.(18KB)104,rfldlg.zipThis article demonstrates how to add a recent file list to a dialog based application(25KB)105,dialogspl_demo.zipSplash screens are not only for Doc/View based applications(142KB)106,CClockCtrl_src.zipA Freeware MFC class to display an analog clock.(17KB)107,ChildDlg.zipChild Dialog (Sub Forms)(29KB)108,CIconDialog_src.zipA Freeware MFC dialog class to select an icon.(12KB)109,CPushPinFrame_src.zipA Freeware MFC PushPin property page dialog class.(19KB)110,showhide.zipA neat way to show/hide groups of related controls(13KB)111,ResizeCtrl.zipA resize control to implement resizable dialogs with MFC(38KB)112,DDXFile_src.zipA Freeware DDX routine for selecting a filename.(29KB)113,DynWindow_src.zipDescribes a method to implement resizable child windows.(108KB)114,DynamicDialog.zipCreate dialogs dynamically, and easily, without the need for a dialog resource script.(40KB)115,DlgExpand.zipThis article shows gives you the ability to make your dialogs expand or contract, depending on how much information the user wishes to view(15KB)116,TipDemo.zipImproved Tip-of-the-Day Dialog(149KB)117,layoutmgr.zipA framework to provide automatic layout control for dialogs and forms(101KB)118,MainWndPlacement.zipSave/restore the main window size at application exit/startup with a single function call in MDI, SDI and dialog based applications.(29KB)119,sizer_demo.zipAn article on extendable layout management classes(27KB)120,Splasher_src.zipAn improved splash screen component for MFC.(62KB)121,StackDialog.zipCreating a stacked dialog such as Netscape's 'Preferences' dialog(22KB)122,bitmappreviewdialog_src.zipThis article describes a completely object oriented standard file open dialog with preview.(12KB)123,subselect_dialog.zipSubselection Dialog(123KB)124,TabDialog.zipA docking dialog that auto-expands when the mouse passes over it(35KB)125,TcxMsgBox.zipTCX Message Box (derived from CWnd)(35KB)126,ToolTips.zipA demonstration of how to show tooltips in modal dialog bozes(23KB)127,UpdateModalDlg_demo.zipHow to update a modal dialog contents using a callback function(17KB)128,WinampWnd_demo.zipAn article discussing a Plugin for Nullsoft Winamp which looks and behaves like the Winamp UI.(43KB)129,Skins.zipA mini library to build Bitmap based skinnable apps.(174KB)130,FaderWnd_demo.zipAn MFC class to fade any window with only one line of code.(28KB)131,Win2kFileDlg.zipEver wanted to use the new Office 2000 file dialogs on Win 95/98/NT/Me, including the file previewing? Well now you can.(76KB)132,win2000fd.zipHow to show the new Common File Dialog in MFC Apps in Windows 2000(36KB)133,Wizard2000.zipCreate Windows 2000 style Wizards with white backgrounds(109KB)134,FileExportDialog.zipAdding filters to the Open File dialog(24KB)135,customize_dialog.zipCustomizing the Windows Common File Open Dialog(15KB)136,SelectFolder.zipThe windows 'Select Folder' dialog with some extra functionality(41KB)137,animate_dlg.zipAnimated Icon on Titlebar of a Dialog based Application(34KB)138,BmpDlg.zipBitmap Dialog Class(52KB)139,namespace.zipClass for Browsing shell namespace with your own dialog(78KB)140,OnUpdate_demo.zipHandling OnUpdate() processing for menu items(10KB)141,DialogUpdates.zipUsing ON_UPDATE_COMMAND_UI with all controls in a Dialog(18KB)142,override.zipCustomizing the font dialog(4KB)143,cmdlg.zipCostumizing CFileDialog(31KB)144,custom_open.zipCustom Open File or Save as Dialog(25KB)145,ColorFormView.zipCFormView Class with Custom Background Color(33KB)146,Banner.zipAnimated Background Banner(88KB)147,MDIClient.zipA Custom MDI Client Class(42KB)148,html_help_view.zipHTML Help In CView Window(5KB)149,MDIPreview_demo.zipPrint Preview in MDI Frame(20KB)150,zoom_scale.zipAdd Zoom and Scale Capabilities to CScrollView(338KB)151,autopan.zipAuto-Panning Windows(44KB)152,autopan2.zipMicrosoft Internet Explorer like Intellimouse AutoScroll(42KB)153,intellipan.zipIntellimouse panning (improved Auto-Panning Windows)(5KB)154,intellipan2.zipIntellimouse panning 2 (A universal Auto-Panning solution)(12KB)155,bigscroll.zipBreaking the CScrollView 32768 size limitation with CBigScrollView(90KB)156,variable_splitter.zipVariable splitter views(58KB)157,TabbedViews_src.zipTabbed Views(78KB)158,animate_icon_src.zipAnimated Icon on Titlebar of a window(48KB)159,msdi1632.zipMultiSingle (MSDI) Document interface(77KB)160,msdidao.zipMultiSingle (MSDI) Document interface with DAO doc(508KB)161,ScreenSwitch_demo.zipMultiple Views Using SDI(26KB)162,multiview.zipMultiple views for a single document (MDI) 3(86KB)163,WinMenu_demo.zipHome made MDI windows list in Window menu(21KB)164,SdiMulti.zipSDI Interface with Multi-Views and Multi-Splitters(88KB)165,DocViewInDll_demo.zipSeparating the views of an MDI application into different DLLs(60KB)166,MultiFrame_demo.zipMultiple frame windows in SDI application(76KB)167,mrcext.zipResizable Docking Window(862KB)168,sizing.zipSizing TabControlBar(46KB)169,devstudio.zipAnother DevStudio-alike DialogBar(43KB)170,docking.zipResizable Docking Window 2(98KB)171,simple_splitter.zipGeneral Purpose Splitter Class(43KB)172,cxysplitter.zipA pair of splitter classes used in dialogbox(21KB)173,dynamic_splitter.zipSplitter Window - "True" dynamic splitter window(52KB)174,outlook_style.zipOutook Style Splitter Bar(59KB)175,minsplit.zipMinimum size splitter(36KB)176,scrbsplt.zipRemoving and reapplying splitter windows on-the-fly in Scribble with a custom splitter window class(157KB)177,switchviews_in_splitter.zipSwitching views in splitter panes (SDI)(44KB)178,rulers_src.zipImplementing Rulers inside of Splitter Panes(5KB)179,dynamic1.zipDifferent Views In Dynamic Splitter(202KB)180,dialogstartupanimation.zipThis sample shows you how to create dialog startup animation like that of Window 98'menu(18KB)181,yqeditgridcontrol.zipa grid control that enable keyboard input. That is to say, you can write data in it. (31KB)182,switchmdiviews.zipThis sample shows you how to switch from one view to the other in a MDI splitter window application(31KB) 183,yqmdireplaceview.zipThis sample shows you how to replace different views in a MDI splitter window application(36KB) 184,switchview.zipThis sample shows you how to switch from one MDI window to another by using the "Ctrl Tab" key.(29KB) 185,filterreturnkey.zipThis sample shows you how to trap, filter the ENTER and ESCAPE key of a dialog box (17KB)186,filterkey.zipThis sample shows you how to filter a certain key and mask that key(18KB)187,editenter.zipThis sample shows you how to use RETURN key to switch among edit controls of a dialog box(18KB)188,dialoghook.zipThis sample shows you how to set keyboard hook function of a dialog box to trap RETURN ,ESCAPE key.(17KB) 189,contexthelp.zipThis sample shows you how to create context sensitive help of a control of a dialog box(26KB) 190,traparrokey.zipThis sample describes how to trap arrow keys in an control of a dialog box (18KB)191,yqadvancedbtn.zipOwner draw hot button support both bitmap and icon, with flat, gripper property. (108KB)192,drawlistbo.zipOwner draw CTabCtrl with flat gripper property (40KB)193,startupanimation.zipCreate Window startup animation, including several kind of animation style, very interesting(23KB) 194,flatlistbox.zipusing a unique way to implement flat attribute( other than those published on the codegurn), as well as hot ,gripper attribute.(21KB) 195,yqhoteditctrl.zipCreate edit control with Hot , flat, gripper. separator attributes (21KB)196,3dmdishadow.zipCreate 3D shadow of a MDI frame windows(32KB) 197,3dsdishadow.zipCreate 3D shadow of a SDI frame windows(29KB)198,getfile.zipA DDX routine for MFC to retrieve filenames(29KB)199,splasher.zipAn improved splash screen component for MFC(62KB)200,pushpin.zipA pushpin button MFC class(12KB)201,getfolder.zipA DDX routine for MFC to retrieve folders(30KB)202,ntray.zipAn MFC class to manipulate tray icons(17KB)203,hlinkctrl.zipAn MFC class to support hyperlinks on windows and dialogs(16KB)204,icondialog.zipAn icon selection dialog class for MFC(12KB)205,pushpinframe.zipAn MFC class to provide property dialogs ala Developer Studio(16KB)206,mappin.zipAn MFC class to implement map pins(286KB)207,iconcombobox.zip2 MFC classes to implement icon selection combo boxes(19KB)208,menuex_demo.zipImplementing an Ownerdrawn menu (35KB)209,bcmenu261.zipCool Owner Drawn Menus with BitmapsVersion 2.61(70KB)210,dynmenu.zipSome handy functions for adding and deleting submenus and menuitems in runtime (16KB)211,gradientmenu.zipCreate Popup menus in MFC with a gradient and text on the left side (89KB)212,menuicon_demo.zipGive your apps a unique look by adding a logo to your menu(48KB)213,bcgbappwizard.zipBCGControlBar library version 4.6(2121KB)214,mpcstatusbar.zipAn enhanced CStatusBar to easily and dynamically add/remove controls on a status bar (48KB)215,textonlystatusbar.zipAn easy to use and implement Text Only Status Bar with Tool tip text extracted from the status bar panes. (39KB)216,progressbar.zipShowing progress bar in a status bar pane(33KB)217,sizecbar_src.zipDevStudio-like docking window (64KB)218,sizing_tabct1_demo.zipCreates a dockable and resizable control bar. (46KB)219,dockview.zipA fairly simple way to incoporate views into sizing control bars(69KB)220,spin_slide_toolbar.zipHow to create toolbars with spinners and/or sliders(48KB)221,tearoffrebars_prj.zipThis article Implements the functionality similar to the Office 2000 toolbars(26KB)222,flatbar.zipA flat toolbar implementation that does not require the updated common controls library from Internet Explorer. (197KB)223,toolbar_droparrow_demo.zipDemonstrates how to use the new toolbar styles to add dropdown arrows to toolbar buttons (28KB)224,dynamictb.zipA simple tutorial that shows how to dynamically replace toolbars at runtime (35KB)225,toolbar_docking_demo.zipDemonstrates how to dock toolbars side-by-side (29KB)226,tapetoolbar.zipA spectacular variation on toolbars (35KB)227,chevions.zipAn introduction to using the cool new toolbar chevrons (18KB)228,toolgroupmanager.zipA reusable template class for managing multiple toolbars, only one of which is displayed at a time(30KB)229,toolbar_hotbuttons_demo.zipDemonstrates how to add rollover buttons to your toolbar(30KB)230,toolbar.zipWTL Tool Bar Drop-Down Extension(64KB)231,win95asm.zipIntroduction to Menus(113KB)232,outbar.zipCGfxOutBarCtrl, an Outlook98 bar-like control(163KB)233,tabstatus.zipAdvanced UI - MDI list in the status bar (and a custom Window List dialog)(62KB)234,gfxlist.zipList Control - Enhanced list control(1544KB)235,maillook.zipInternet Mail Look(42KB)236,cdxcdynamic.zipDynamic child window repositioning for dialogs, property sheets, form views and any other CWnd derived classes. (227KB)237,voicecmd.zipVoice Command Enabling Your Software (27KB)238,cj60lib.zipMFC Extension Library - CJ60 Version 6.07(1100KB)239,infobar.zipInformation Bar (62KB)240,switcher.zipA Switcher Control (like the Windows Task Bar) (40KB)
BCGControlBarPro.v12.00
使用方法： 1、解压至C:\Program Files目录下（密码：xiaoqing）； 2、双击导入注册表C:\Program Files\BCGSoft\BCGControlBarPro\bcgcontrolbarpro.12.00.reg； 3、运行向导C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBProIntegrationWizard.exe。 与其它不同之处： 1、包含完整的源代码、帮助文件； 2、已经对 BCGPAppWizard2005 中的向导进行汉化，在 Visual Studio 2008（2010） 中可使用中文向导 BCGPAppWizard （参考 Visual Studio 2008 原有的中文向导，如果您想学习汉化向导，参考目录是：C:\Program Files\Microsoft Visual Studio 9.0\VC\VCWizards\AppWiz\MFC\Application\templates\2052） 关于静态链接： 1、首先必须在运行向导BCGCBProIntegrationWizard.exe时已经编译静态库； 2、在 Visual Studio 建立项目向导时，选择静态链接即可。 关于使用 Office2007、2010 风格： 如果您使用了这些新风格，必须在项目中包括这些资源，否则 debug 版本启动时会报错（缺少资源，release版本不会提示，但显示不正常），具体有二种方法： 1、直接在“解决方案资源管理器”-“资源文件”中点右键，“添加”-“现有项”，把C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBPro\Styles中所有扩展名为 .rc 的资源包括进来即可。 2、直接在“资源视图”-“您的项目”上点右键，选择“资源包括”，在“资源包括”中的“编译时指令”中的#include "BCGCBPro.rc"后面添加以下代码： #include "C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBPro\Styles\BCGPStyle2007Aqua.rc" #include "C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBPro\Styles\BCGPStyle2007Luna.rc" #include "C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBPro\Styles\BCGPStyle2007Obsidian.rc" #include "C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBPro\Styles\BCGPStyle2007Silver.rc" #include "C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBPro\Styles\BCGPStyle2010White.rc" #include "C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBPro\Styles\BCGPStyleCarbon.rc" #include "C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBPro\Styles\BCGPStyleScenic.rc" 3、如果使用动态库链接，请手工编译C:\Program Files\BCGSoft\BCGControlBarPro\BCGCBPro\Styles\Office2007_styles.sln或者build_all.dsp 仅为学习使用，下载后24小时内删除，请支持 BCGSoft 购买正版，本人不提供技术支持，不对任何负责。 尊重他人劳动成果，欢迎与大家分享成果。 官方更新说明： http://www.bcgsoft.com/bcgcontrolbarpro-versions.htm Version 12.0. Released 01/20/2010 New features CBCGPVisualManager2010 implements Microsoft Office 2010 Beta 1 color themes: Blue theme (see screenshot) Black theme (see screenshot) Silver theme (see screenshot) Just activate CBCGPVisualManager2010 to use these new themes in your application: CBCGPVisualManager::SetDefaultManager (RUNTIME_CLASS (CBCGPVisualManager2010)); Please run BCGPMSOffice2007Demo, DrawCli or BCGPOrganizer to see this feature in action. Added Microsoft Office 2010-style Ribbon Backstage View (see screenshot). The following new methods were added to CBCGPRibbonBar class: SetBackstageMode: enables/disables Backstage View mode. IsBackstageMode: returns TRUE if Backstage View mode is enabled. AddBackstageCategory: creates Backstage View category. GetBackstageCategory: returns Backstage View category. IsBackstageViewActive: returns TRUE if Backstage View is currently active. By default, the Ribbon Application button will be displayed with the default (blue) color, but developers can customize its appearance by calling visual manager's new method 'SetMainButtonColor' (see screenshot). CBCGPRibbonBar::AddBackstageCategory returns a pointer to the new class object - CBCGPRibbonBackstageViewPanel. Usually, you'll need to call the following class methods to create your backstage view: AddCommand: add a single command button such as "Save", "Save As" or "Exit". AddView: add a button with attached right-side form ("Print", "Recent Files" and so on). There are 2 new classes that should be used for implementing right-side views: CBCGPRibbonBackstageViewItemForm: a single page dialog CBCGPRibbonBackstageViewItemPropertySheet: multi-page Please note that our Application Wizards were updated and now, when you're creating a new, Ribbon-based application, you can choose "Backstage view" option (see screenshot) and initial backstage view code will be automatically generated for your pleasure!. The Ribbon bar Application ("main") Button can display a text label instead of icon in the "scenic" mode (usually "File" in English language UI). The following new methods were added to the CBCGPRibbonMainButton class: SetScenicText GetScenicText Implemented ability to add Ribbon Galleries to the dialogs (see screenshot). The new class CBCGPRibbonGalleryCtrl may be used for this purpose. Please take a look at BCGPMSOffice2007Demo example (Backstage view pages) to see this new control in action. Implemented Resizable Dialogs support (see screenshot1 and screenshot2): Added 2 new classes: CBCGPControlsLayout: implements the base class for all layout managers. CBCGPStaticLayout: implements "static" layout management based on anchors. To enable layout support, you've to call EnableLayout/GetLayout methods in the following classes: CBCGPDialog CBCGPDialogBar CBCGPropertyPage CBCGPFormView Please run ResizableForm new sample to see this feature in action. In addition, you can see this feature in the following examples and samples: BCGPMSOffice2007Demo: "Clipboard" Pane and Backstage view. BCGPOrganizer: resizable dialog bar. RibbonGadgets: backstage view. ToolBoxDemo: resizable form Significantly improved CBCGPVisualManagerVS2010 (see screenshot): The color scheme is identical to Visual Studio 2010 Beta 2. Added a new Smart Docking style (BCGP_SDT_VS2010). You can run BCGPVisualStudioGUIDemo example to examine this look. Added content scrolling support to CBCGPDockingControlBar-derived classes (see screenshot). By default, the scrolling is implemented in CBCGPDialogBar class only, but you can easily add this support to any CBCGPDockingControlBar-derived class (please take a look at BCGPGridExample example, COutputBar class). CBCGPDockingBarScrollButton class implements docking pane scroll button (vertical and horizontal) and its look depends on the currently activated visual manager. Calculator control has been significantly improved: All calculator buttons are drawn using built-in bitmaps and use visual manager appearance (see screenshot). Implemented extended commands. Using a new method CBCGPCalculator::SetExtendedCommands developers can add a lot of build-in calculator commands such as idCommandAdvSin, idCommandAdvCos, idCommandAdvTan and others. CBCGPRibbonComboBox allows to display a popup calculator window. Just call CBCGPRibbonComboBox::EnableCalculator method to assign a calculator to the ribbon combobox. Override a new 'OnCalculatorUserCommand' method to implement your calculator commands. Please take a look at BCGPControls example and RibbonGadgets/SkinnedDialog samples to see these new features in action. The following new methods were added to CBCGPVisualManager class: OnDrawDockingBarScrollButton OnDrawCaptionBarCloseButton GetHeaderCtrlTextColor OnFillPropSheetHeaderArea OnDrawDateTimeDropButton GetCalculatorButtonTextColor GetEditCtrlSelectionBkColor GetEditCtrlSelectionTextColor OnDrawDlgSizeBox OnFillRibbonBackstageForm OnDrawRibbonMinimizeButtonImage GetRibbonMinimizeButtonImageSize GetRibbonButtonsGroupHorzMargin IsDrawRibbonGroupSeparator OnDrawRibbonGroupSeparator GetRibbonBackstageTopLineHeight OnDrawRibbonBackstageTopLine SetMainButtonColor GetMainButtonColor IsOwnerDrawDlgSeparator OnDrawDlgSeparator CBCGPPropertySheet has a new mode: PropSheetLook_AeroWizard (see screenshot). In general, this mode has been designed and implemented for Vista/Windows 7 Aero, but you can use it in any OSs/modes (see screenshot). The glass (aero) area can be combined with a page header - we've added a new optional parameter 'bDrawHeaderOnAeroCaption' to EnablePageHeader method. Please take a look at PropSheetDemo sample to see this mode. Added support for the Internet Explorer-like new tab in CBCGPTabWnd class (see screenshot). Call EnableNewTab method to enable this feature. Please take a look BCGPIE7Demo example to see this feature in action. Grid and Report controls changes: Added option to select items by clicks on grid header: New header flag BCGP_GRID_HEADER_SELECT. Implemented color themes for the new visual managers such as CBCGPVisualManager2010 (Office 2010-like) and CBCGPVisualManagerVS2010 (Visual Studio 2010-like) (see screenshot). Improved grid printing support. The following new classes were added: CBCGPGridPage class: this class is used by the grid control to store print pages. A print page specifies which area of the grid is printed at the specified page. The grid counts in items in vertical direction. The grid counts in pixels in horizontal direction. CBCGPGridPageInfo class: This class is used by the grid control to store information about the printing range and the currently printing page. It is stored in CBCGPGridCtrl::m_PrintParams::m_pageInfo member and in CPrintInfo::m_lpUserData member of the CPrintInfo object used while printing at the current print session. Added an option to deselect items. To deselect an item please use SetCurSel with SM_INVERT_SEL flag. New functions were added: CBCGPGridCtrl::EnableInvertSelOnCtrl CBCGPGridCtrl::IsInvertSelOnCtrlEnabled Changes in header click events: New BCGM_GRID_COLUMN_CLICK message. Added CBCGPGridCtrl::OnHeaderColumnRClick. Modified CBCGPGridCtrl::OnHeaderColumnClick. Items align support: New CBCGPGridItem::GetAlign function. Item's alignment is specified by CBCGPGridCtrl::SetColumnAlign. Grid horizontal pagination support. Added CBCGPGridPage::m_nWidth - page width, CBCGPGridPageInfo::m_nPageWidth - width of currently printed page. See CBCGPGridPage class, CBCGPGridPageInfo class. Drag-and-Drop support (see new "Drag and Drop" tab in BCGPGridExample sample): New message BCGM_GRID_BEGINDRAG. Added methods EnableDragSelection, IsDragSelectionEnabled, EnableDragSelectionBorder, IsDragSelectionBorderEnabled, StartDragItems and HitTestSelectionBorder. Extended in-place edit customization support (see new "Easy Input" tab in BCGPGridExample sample): New messages BCGM_GRID_ITEM_BEGININPLACEEDIT, BCGM_GRID_ITEM_ENDINPLACEEDIT. New functions OnBeginInplaceEdit, OnEndInplaceEdit, CanBeginInplaceEditOnChar, CanEndInplaceEditOnChar, OnInplaceEditKeyDown, OnInplaceEditSetSel. New BCGPGRID_ITEM_INFO::dwResultCode member. See BCGPGRID_ITEM_INFO struct. New method SetClearInplaceEditOnEnter. Call SetClearInplaceEditOnEnter (FALSE) to disable grid from clearing content of the item on Enter. Added CBCGPGridCtrl::GoToNextItem method. CBCGPGridCtrl::EnsureVisible is now virtual. Added navigation by TAB (Shift+TAB) key. Added "Ctrl+Z" (Undo) handler for in-place edit of the grid item. Changes in CBCGPGridCtrl::SetCurSel for SM_SET_ACTIVE_ITEM style. Grid item with combo-box now supports F4 to open drop-down list. Added a new parameter CBCGPMDITabParams::m_bReuseRemovedTabGroups. If this flag is TRUE MDI tab groups which were marked as removed will be used for new groups. This reduces memory consumption for applications that frequently create and remove groups. Added OpenType font support for font combo boxes. Added keyboard and MS Active Accessibility support to CBCGPTasksPane class. CBCGPEditCtrl::ExportBuffer has a new optional parameter 'BOOL bForceAnsi'. Setting it to TRUE forces exporting editor's text in ANSI format. CBCGPRibbonStatusBarPane constructor and SetAnimationList method have a new optional parameter 'BOOL bDontScaleInHighDPIMode'. Set it to TRUE if you don't need to scale pane image in the High DPI mode. When user clicks on the glass area of CBCGPExplorerToolBar window, the application window is moved now. Added CBCGPCalendarBar::GetState method - returns the calendar style flags specified in SetState method. CBCGPRibbonEdit displays a drop-down window upon pressing F4 key. Added CBCGPShellManager::IsControlPanel method. Added new font 'fontCaption' to BCGPGLOBAL_DATA. This font will be useful for displaying caption texts. CBCGPStatic has a new member: m_clrText. You can set this member to colorize text labels (see SkinnedDialog sample). New method CBCGPDockManager::ShowFloatingBars shows/hides floating panes. CBCGPListBox control can work with left-side icons and item group headers now. The following new methods were added: SetImageList: set items image list SetItemImage: associate item with a specific icon AddCaption: add a group caption Changes in examples and samples: BCGPControls: "Calculator" page demonstrates new calculator features BCGPGridExample: added new visual managers and new 2 tabs: "Drag and Drop" and "Easy Input" BCGPIE7Demo: the tab control was fully redesigned and derived from the library MDI Tab control. BCGPMSOffice2007Demo: added MS Office 2010 Backstage view. "Clipboard" pane demonstrates a new layout manager. BCGPVisualStudioGUIDemo: Start Page view can be converted to docking control bar. DrawCli: added MS Office 2010 Backstage view and new visual managers. PropSheetDemo: added Aero Wizard demonstration. ResizableForm: new sample, demonstrates how to use a new layout manager along with dialogs, dialog bars, property sheets and form views. RibbonGadgets: added MS Office 2010 Backstage view and edit boxes with calculator. SkinnedDialog: added edit box with calculator and text labels with a custom colors. Changes in the Ribbon Designer: Added "Calculator" element. Support for three new styles introduced in Microsoft Office 2010 (blue, silver, black) Ribbon elements can be edited by double click. Image lists can be loaded from files. Implemented icon editing for Palette (Gallery) Buttons. Fixes: FireChangingActiveTab is called from CBCGPOutlookWnd::SetActiveTab now. Fixed resource leak in CBCGPUserTool::DrawToolIcon Fixed problem with a slider's thumb location in CBCGPRibbonSlider::SetThumbRect in the High DPI mode. Improved appearance of the calendar drop-down button in CBCGPDateTimeCtrl. Fixed problem with setting editbox auto-complete mode in Windows 9x/NT4 CBCGP***FrameWnd::WinHelp dwData parameter has DWORD_PTR type now. This fixes 64-bit compatibility issue with this virtual method. Fixed memory leak in CBCGPPngImage::LoadFromBuffer (VS.NET 2003 or higher, BCGP_EXCLUDE_GDI_PLUS is defined). CBCGPGroup is properly handles WM_SETTEXT message now. CBCGPCalendar always closes dropped-down month picker when the calendar is being destroyed. CBCGPRibbonEdit::OnDraw correctly draws edit box label in case of center/right-side control alignment. Fixed appearance of CBCGPExCheckList items in the high DPI mode (under VC++ 6.0). Fixed problem with displaying disabled check boxes (CBCGPButton class) when some visual managers are activated. Fixed problem with CBCGPHeaderCtrl items text color when some visual managers are activated. Fixed problem with vertical scrolling of elements in CBCGPRibbonPanel::OnKey. CBCGPEdit correctly draws a browse button image and text when control is located on the glass (aero) area. CBCGPEdit uses visual manager color them when control has ES_READONLY style. CBCGPStatic doesn't perform the custom drawing if it has a style like icon, rectangle or frame. CBCGPPropertySheet: fixed some problems with repositioning and redrawing navigation buttons. Fixed some visual problems in owner-draw frame/dialog captions. Ribbon Main Button scenic icon is correctly painted in high DPI mode now. Fixed problem with text alignment in grid columns. CBCGPGridCtrl::SetColumnAlign is working properly now. Fixed bug with using different horizontal color and vertical color for the grid lines. The m_clrVertLine setting did not work when m_bGridItemBorders flag was switched on. Fixed problem with clicking on CBCGPGridURLItem in read-write mode. Fixed a bug with automatic sizing of grid columns. The bug appeared when auto-sizing was enabled with EnableColumnAutoSize(TRUE). Fixed bug with "Ctrl+A" for in-place editing of grid items. "Ctrl+A" selects all text inside in-place editor during in-place editing, instead of the entire grid as before. Fixed memory leak in CBCGPGridCtrl::CopyHtmlToClipboardInternal. Ribbon Designer supports Visual Studio 2008 and Visual Studio 2010 Beta 2 projects.
【libdatachannel】4：搬运:硬盘到新电脑：cmake ： Custom Build Tool
cmake
VC/MFC

16,550

社区成员

421,606

社区内容

发帖
与我相关
我的任务
社区描述
VC/MFC相关问题讨论
社区管理员
  • 基础类社区
  • Creator Browser
  • encoderlee
加入社区
  • 近7日
  • 近30日
  • 至今

加载中

查看更多榜单
社区公告

        VC/MFC社区版块或许是CSDN最“古老”的版块了，记忆之中，与CSDN的年龄几乎差不多。随着时间的推移，MFC技术渐渐的偏离了开发主流，若干年之后的今天，当我们面对着微软的这个经典之笔，内心充满着敬意，那些曾经的记忆，可以说代表着二十年前曾经的辉煌……
        向经典致敬，或许是老一代程序员内心里面难以释怀的感受。互联网大行其道的今天，我们期待着MFC技术能够恢复其曾经的辉煌，或许这个期待会永远成为一种“梦想”，或许一切皆有可能……
        我们希望这个版块可以很好的适配Web时代，期待更好的互联网技术能够使得MFC技术框架得以重现活力，……

试试用AI创作助手写篇文章吧

+ 用AI写文章