AP6210 wifi驱动

[滴水未满]

现在调试发现有sdio的报错，但是全志明确说是支持AP6210的，配置也是严格按手册做的，不知道哪里出了问题
<4>[ 98.780315] =========== WLAN going back to live ========
<4>[ 98.780328] sdio_reset_comm():
<4>[ 98.780337] mmc_claim_host enter
<4>[ 98.780351] mmc_claim_host leave
<4>[ 98.780360] mmc_go_idle enter
<4>[ 98.780377] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<4>[ 98.783244] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<4>[ 98.784299] mmc_go_idle leave
<4>[ 98.784309] mmc_set_clock enter
<4>[ 98.784322] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<4>[ 98.784375] mmc_set_clock leave
<4>[ 98.784384] mmc_send_io_op_cond enter
<4>[ 98.786106] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 5, RTO !!
<4>[ 98.787856] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 5, RTO !!
<4>[ 98.789606] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 5, RTO !!
<4>[ 98.791355] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 5, RTO !!
<4>[ 98.791390] mmc_wait_for_cmd return:-110
<4>[ 98.791401] mmc_send_io_op_cond return:-110
<4>[ 98.791413] mmc2: Error resetting SDIO communications (-110)
<4>[ 98.791428] sdioh_start Failed, error = -110

[Einsteinnn]

@cfzyv5 请问一下，我现在也遇到了跟你们一样的情况，最终是怎样原因导致的，能够指点一下吗

[cfzyv5]

楼主弄好了吗？我现在也遇到sdio通信不成功的问题

[Einsteinnn]

请问一下，我现在也遇到了跟你们一样的情况，最终是怎样原因导致的，能够指点一下吗