cannot read property 'layer' of null

crszhi 2018-04-17 06:14:12

无法进入yes确定按钮回调方法
...全文
1247 11 打赏 收藏 转发到动态 举报
写回复
用AI写文章
11 条回复
切换为时间正序
请发表友善的回复…
发表回复
jinrongquan 2018-11-15
  • 打赏
  • 举报
回复
哦,对,button为 type='submit'的时候,yes方法相当于会触发提交表单的请求,所以button所在的弹窗层会刷新一遍
scscms太阳光 2018-11-13
  • 打赏
  • 举报
回复
button的type是一个必填值,如果没有会默认取type="submit" 即提交按钮。
jinrongquan 2018-11-13
  • 打赏
  • 举报
回复
这个问题我也遇到了,不过我这边解决了,我这边的问题触发的点是在于点击弹出层的那个按钮没有添加 type="button"属性, 而很奇葩的是我本身用的就是<button>标签,怎么会去加type="button"呢。。。 不加这个属性,我断点调试发现会在点击按钮弹窗的时候,重新刷新父窗口,所以子窗口点yes按钮返回父窗口的时候,top对象是null 加上就好了,感觉是个很坑的bug
licip 2018-04-19
  • 打赏
  • 举报
回复
top.layer.open()这个方法是从外部引入进来的吧。有可能有你说的情况。在用这个方法之前,你要先引入,然后,再使用。
crszhi 2018-04-19
  • 打赏
  • 举报
回复
引用 6 楼 Free_Wind22 的回复:
执行到top.layer.open的时候,上级页面是否加载完成?可能子页面比layer弹窗先加载完?
但是打开子页面也是用这个top.layer.open(),只是他操作完后点击确定执行yes回调函数时才出的错。 每次操作大概3,4分钟左右,应该都加载完才对。他一天操作下来会遇到3,4次,并不是每次都会有。 那是不是应该确保上级页面加载完毕后才允许打开子页面? 那我该如何确保它加载完毕后才让他执行onclick内的函数 <a href="#" onclick="openDialogView('查看会议基本信息', '${ctx}/meet/meetInfo/form?id=${meetInfo.id}','800px', '500px')">
crszhi 2018-04-19
  • 打赏
  • 举报
回复
引用 5 楼 licip 的回复:
top.layer.open()这个方法是从外部引入进来的吧。有可能有你说的情况。在用这个方法之前,你要先引入,然后,再使用。
那如何确保它每次引入成功之后才给它使用
2018-04-19
  • 打赏
  • 举报
回复
执行到top.layer.open的时候,上级页面是否加载完成?可能子页面比layer弹窗先加载完?
crszhi 2018-04-18
  • 打赏
  • 举报
回复
别人用的时候,他也不是每次都会出这个问题,我看了他操作了半个小时,8,9次最后一次才出现这个问题,他一天操作下来会遇到3,4次。 如果我知道问题在哪的话,我可以去调试。但是我测了一个小时,二三十次都没出问题,完全无法调试。会不会是因为网速问题,或者其他问题?
75闪光雷 2018-04-18
  • 打赏
  • 举报
回复
应该是你的layer是空值, 建议检查layer赋值地方,断点调试
crszhi 2018-04-17
  • 打赏
  • 举报
回复
crszhi 2018-04-17
  • 打赏
  • 举报
回复
笔记本的风扇控制 ---------------------------------------- 09 November 2006. Summary of changes for version 20061109: 1) ACPI CA Core Subsystem: Optimized the Load ASL operator in the case where the source operand is an operation region. Simply map the operation region memory, instead of performing a bytewise read. (Region must be of type SystemMemory, see below.) Fixed the Load ASL operator for the case where the source operand is a region field. A buffer object is also allowed as the source operand. BZ 480 Fixed a problem where the Load ASL operator allowed the source operand to be an operation region of any type. It is now restricted to regions of type SystemMemory, as per the ACPI specification. BZ 481 Additional cleanup and optimizations for the new Table Manager code. AcpiEnable will now fail if all of the required ACPI tables are not loaded (FADT, FACS, DSDT). BZ 477 Added #pragma pack(8/4) to acobject.h to ensure that the structures in this header are always compiled as aligned. The ACPI_OPERAND_OBJECT has been manually optimized to be aligned and will not work if it is byte-packed. Example Code and Data Size: These are the sizes for the OS- independent acpica.lib produced by the Microsoft Visual C++ 6.0 32- bit compiler. The debug version of the code includes the debug output trace mechanism and has a much larger code and data size. Previous Release: Non-Debug Version: 78.1K Code, 17.1K Data, 95.2K Total Debug Version: 155.4K Code, 63.1K Data, 218.5K Total Current Release: Non-Debug Version: 77.9K Code, 17.0K Data, 94.9K Total Debug Version: 155.2K Code, 63.1K Data, 218.3K Total 2) iASL Compiler/Disassembler and Tools: Fixed a problem where the presence of the _OSI predefined control method within complex expressions could cause an internal compiler error. AcpiExec: Implemented full region support for multiple address spaces. SpaceId is now part of the REGION object. BZ 429 ---------------------------------------- 11 Oc
Changes in 2.4.6 (February 22, 2011): Brief summary : - Support more host OS to run on: - Include win64 native binary in the release. - Fixed failures on big endian hosts. - BIOS: Support for up to 2M ROM BIOS images. - GUI: select mouse capture toggle method in .bochsrc. - Ported most of Qemu's 'virtual VFAT' block driver (except runtime write support, but plus FAT32 suppport) - Added write protect option for floppy drives. - Bugfixes / improved internal debugger + instrumentation. Detailed change log : - CPU and internal debugger - Implemented Process Context ID (PCID) feature - Implemented FS/GS BASE access instructions support (according to document from http://software.intel.com/en-us/avx/) - Rewritten from scratch SMC detection algorithm - Implemented fine-grained SMC detection (on 128 byte granularity) - Bugfixes for CPU emulation correctness and stability - Fixed failures on Big Endian hosts ! - Print detailed page walk information and attributes in internal debugger 'page' command - Updated/Fixed instrumentation callbacks - Configure and compile - Bochs now can be compiled as native Windows x86-64 application (tested with Mingw gcc 4.5.1 and Microsoft Visual Studio Express 2010) - Added ability to configure CPUID stepping through .bochsrc. The default stepping value is 3. - Added ability to disable MONITOR/MWAIT support through .bochsrc CPUID option. The option is available only if compiled with --enable-monitor-mwait configure option. - Determine and select max physical address size automatically at configure time: - 32-bit physical address for 386/486 guests - 36-bit physical address for PSE-36 enabled Pentium guest - 40-bit physical address for PAE enabled P6 or later guests - Update config.guess/config.sub scripts to May 2010 revisions. - Update Visual Studio 2008 project files in build/win32/vs2008ex-workspace.zip - Added Bochs compilation timestamp after Bochs version string. - GUI and display libraries (Volker) - Added new .bochsrc option to select mouse capture toggle method. In addition to the default Bochs method using the CTRL key and the middle mouse button there are now the choices: - CTRL+F10 (like DOSBox) - CTRL+ALT (like QEMU) - F12 (replaces win32 'legacyF12' option) - display library 'x' now uses the desktop size for the maximum guest resolution - ROM BIOS - Support for up to 2M ROM BIOS images - I/O Devices - 3 new 'pseudo device' plugins created by plugin separation (see below) - Fixes for emulated DHCP in eth_vnet (patch from @SF tracker) - Added support for VGA graphics mode with 400 lines (partial fix for SF bug #2948724) - NE2K: Fixed "send buffer" command issue on big endian hosts - USB - converted common USB code plus devices to the new 'usb_common' plugin Now the USB device classes no longer exist twice if both HC plugins are loaded. - added 'pseudo device' in common USB code for the device creation. This makes the HCs independent from the device specific code. - USB MSD: added support for disk image modes (like ATA disks) - USB printer: output file creation failure now causes a disconnect - re-implemented "options" parameter for additional options of connected devices (currently only used to set the speed reported by device and to specify an alternative redolog file of USB MSD disk image modes) - hard drive - new disk image mode 'vvfat' - ported the read-only part of Qemu's 'virtual VFAT' block driver - additions: configurable disk geometry, FAT32 support, read MBR and/or boot sector from file, volatile write support using hdimage redolog_t class, optional commit support on Bochs exit, save/restore file attributes, 1.44 MB floppy support, set file modification date/time - converted the complete hdimage stuff to the new 'hdimage' plugin - new hdimage method get_capabilities() that can return special flags - vmware3, vmware4 and vvfat classes now return HDIMAGE_HAS_GEOMETRY flag - other disk image modes by default return HDIMAGE_AUTO_GEOMETRY if cylinder value is set to 0 - multiple sector read/write support for some image modes - new log prefix "IMG" for hdimage messages - floppy - added write protect option for floppy drives (based on @SF patch by Ben Lunt) - vvfat support - bugfix: close images on exit - SB16 - converted the sound output module stuff to the new 'soundmod' plugin - SF patches applied [3164945] hack to compile under WIN64 by Darek Mihocka and Stanislav [3164073] Fine grain SMC invalidation by Stanislav [1539417] write protect for floppy drives by Ben Lunt [2862322] fixes for emulated DHCP in eth_vnet - these S.F. bugs were closed/fixed [2588085] Mouse capture [3140332] typo in mf3/ps2 mapping of BX_KEY_CTRL_R [3111577] No "back" option in log settings [3108422] Timing window in NE2K emulation [3084390] Bochs won't load floppy plugin right on startup [3043174] Docbook use of '_' build failure [3085140] Ia_arpl_Ew_Rw definition of error [3078995] ROL/ROR/SHL/SHR modeling wrong when dest reg is 32 bit [2864794] BX_INSTR_OPCODE in "cpu_loop" causes crash in x86_64 host [2884071] [AIX host] prefetch: EIP [00010000] > CS.limit [0000ffff] [3053542] 64 bit mode: far-jmp instruction is error [3011112] error compile vs2008/2010 with X2APIC [3002017] compile error with vs 2010 [3009767] guest RFLAGS.IF blocks externel interrupt in VMX guest mode [2964655] VMX not enabled in MSR IA32_FEATURE_CONTROL [3005865] IDT show bug [3001637] CMOS MAP register meaning error [2994370] Cannot build with 3DNow support - these S.F. feature requests were closed/implemented [1510142] Native Windows XP x64 Edition binary [1062553] select mouse (de)activation in bochsrc [2930633] legacy mouse capture key : not specific enough [2930679] Let user change mouse capture control key [2803538] Show flags for pages when using "info tab" ------------------------------------------------------------------------- Changes in 2.4.5 (April 25, 2010): Brief summary : - Major configure/cpu rework allowing to enable/disable CPU options at runtime through .bochsrc (Stanislav) - Bugfixes for CPU emulation correctness and stability - Implemented X2APIC extensions (Stanislav) - Implemented Intel VMXx2 extensions (Stanislav) - Extended VMX capability MSRs, APIC Virtualization, X2APIC Virtualization, Extended Page Tables (EPT), VPID, Unrestricted Guests, new VMX controls. - Implemented PCLMULQDQ AES instruction - Extended Bochs internal debugger functionality - USB HP DeskJet 920C printer device emulation (Ben Lunt) Detailed change log : - Configure rework - Deprecate --enable-popcnt configure option. POPCNT instruction will be enabled automatically iff SSE4_2 is supported (like in hardware). - Make --ignore-bad-msrs runtime option in .bochsrc. Old --ignore-bad-msrs configure option is deprecated and should not be used anymore. - Enable changing part of CPU functionality at runtime through .bochsrc. - Now you could enable/disable any of SSEx/AES/MOVBE/SYSENTER_SYSEXIT/XSAVE instruction sets using new CPUID option in .bochsrc. - When x86-64 support is compiled in, you could enable/disable long mode 1G pages support without recompile using new CPUID option in .bochsrc. Configure options: --enable-mmx, --enable-sse, --enable-movbe, --enable-xsave, --enable-sep, --enable-aes, --enable-1g-pages are deprecated and should not be used anymore. - Local APIC configure option --enable-apic is deprecated and should not be used anymore. The LAPIC option now automatically determined from other configure options. XAPIC functionality could be enabled using new CPUID .bochsrc option. - Changed default CPU configuration (generated by configure script with default options) to BX_CPU_LEVEL=6 with SSE2 enabled. - CPU - Implemented PCLMULQDQ AES instruction - Implemented X2APIC extensions / enable extended topology CPUID leaf (0xb), in order to enable X2APIC configure with --enable-x2apic - Implemented Intel VMXx2 extensions: - Enabled extended VMX capability MSRs - Implemented VMX controls for loading/storing of MSR_PAT and MSR_EFER - Enabled/Implemented secondary proc-based vmexec controls: - Implemented APIC virtualization - Implemented Extended Page Tables (EPT) mode - Implemented Descriptor Table Access VMEXIT control - Implemented RDTSCP VMEXIT control - Implemented Virtualize X2APIC mode control - Implemented Virtual Process ID (VPID) - Implemented WBINVD VMEXIT control - Implemented Unrestricted Guest mode In order to enable emulation of VMXx2 extensions configure with --enable-vmx=2 option (x86-64 must be enabled) - Bugfixes for CPU emulation correctness - Fixed Bochs crash when accessing the first byte above emulated memory size - Internal Debugger - Introduced range read/write physical watchpoints - Allow reloading of segment registers from internal debugger - Improved verbose physical memory access tracing - BIOS - Fix MTRR configuration (prevented boot of modern Linux kernels) - Fix interrupt vectors for INT 60h-66h (reserved for user interrupt) by setting them to zero - Fix BIOS INT13 function 08 when the number of cylinders on the disk = 1 - I/O Devices - USB HP DeskJet 920C printer device emulation (Ben Lunt) - Misc - Updated Bochs TESTFORM to version 0.5 - SF patches applied [2864402] outstanding x2apic patches by Stanislav [2960379] Fix build with -Wformat -Werror=format-security by Per Oyvind Karlsen [2938273] allow instrumentation to change execute by Konrad Grochowski [2926072] Indirection operators in expressions by Derek Peschel [2914433] makesym.perl misses symbols by John R. Jackson [2908481] USB Printer by Ben Lunt - these S.F. bugs were closed/fixed [2861662] dbg_xlate_linear2phy needs to be updated [2956217] INT13 AH=8 returns wrong values when cylinders=1 [2981161] Allow DMA transfers to continue when CPU is in HALT state [2795115] NX fault could be missed [2964824] bad newline sequence in aspi-win32.h [913419] configure options and build process needs some work [2938398] gdbstub compile error with x86_64 enabled [2734455] shutdown/reset type 05 should reinit the PICs [1921294] extended memory less than 1M wrong size [1947249] BX_USE_EBDA_TABLES and MP table placement [1933859] BX_USE_EBDA_TABLES and memory overlapping [2923680] "help dregs" is a syntax error [2919661] CPU may fail to do 16bit near call [2790768] Memory corruption with SMP > 32, Panic BIOS Keyboard Error [2902118] interrupts vectors 0x60 to 67 should be NULL ! [2912502] Instruction Pointer behaving erratically [2901047] Bochs crashed, closed by guest os [2905385] Bochs crash [2901481] Instruction SYSRET and SS(PL) [2900632] Broken long mode RETF to outer priviledge with null SS [1429011] Use bx_phyaddr_t for physaddr vars and bx_adress for lin adr - these S.F. feature requests were closed/implemented [2955911] RPM preuninstall scriptlet removes /core [2947863] don't abort on unrecognised options [2878861] numerics in the disassembler output [2900619] make more CPU state changeable ------------------------------------------------------------------------- Changes in 2.4.2 (November 12, 2009): - CPU and internal debugger - VMX: Implemented TPR shadow VMEXIT - Bugfixes for CPU emulation correctness (mostly for VMX support). - Bugfixes and updates for Bochs internal debugger - On SMP system stepN command now affects only current processor - Memory - Bugfixes for > 32-bit physical address space. - Allow to emulate more physical memory than host actually could or would like to allocate. For more details look for new .bochsrc 'memory' option. - Cleanup configure options - All paging related options now will be automatically determined according to --enable-cpu-level option. Related configure options --enable-global-pages, --enable-large-pages, --enable-pae, --enable-mtrr are deprecated now. Only 1G paging option still remaining unchanged. - Deprecate --enable-daz configure option. Denormals-are-zeros MXCSR control will be enabled automatically iff SSE2 is supported (like in hardware). - Deprecate --enable-vme configure option, now it will be supported iff CPU_LEVEL >= 5 (like in hardware). - I/O Devices - Bugfixes for 8254 PIT, VGA, Cirrus-Logic SVGA, USB UCHI - SF patches applied [2817840] Make old_callback static by Mark Marshall [2874004] fix for VMWRITE instruction by Roberto Paleari [2873999] fix CS segment type during fast syscall invocation by Roberto Paleari [2864389] Debugger gui maximize on startup by Thomas Nilsen [2817868] Rework loops in the memory code by Mark Marshall [2812948] PIT bug by Derek - these S.F. bugs were closed/fixed [2833504] GUI debugger bug-about GDT display [2872244] BIOS writes not allowed value to MTRR MSR causing #GP [2885383] SDL GUI memory leak [2872290] compilation in AIX5.3 ML10 failes [2867904] crash with cirrus bx_vga_c::mem_write [2851495] BIOS PCI returns with INT flag = 0 [2860333] vista 64 guest STOP 109 (GDT modification) [2849745] disassembler bug for 3DNow and SSE opcodes [1066748] Wrong registers values after #RESET, #INIT [2836893] Regression: Windows XP installer unable to format harddrive [2812239] VMX: VM-Exit: Incorrect instruction length on software int [2814130] bx_debug lex/yacc files incorrectly generated [2813199] MP Tables Missing From BIOS [2824093] VMX exception bug [2811909] VMX : CS Access-rights Type.Accessed stays 0 [2810571] Compile Errors on OSX [2823749] GCC regression or VM_EXIT RDMSR/WRMSR bug [2815929] Vista/XP64 unnecessary panic [2803519] Wrong example in man page bochsrc - these S.F. feature requests were closed/implemented [422766] Large Memory configurations [1311287] Idea for a better GUI [455971] USB support [615363] debugger shortcut for repeat last cmd ------------------------------------------------------------------------- Changes in 2.4.1 (June 7, 2009): - Fixed bunch of CPUID issues - Bochs is now able to install and boot 64-bit Windows images! (special thanks to Mark Ebersole for his patch) - Several bugfixes in CPU emulation (mostly for x87 instructions) - Fixed two critical deadlock bugs in the Win32 gui (patches from @SF tracker) - Fixes related to the 'show ips' feature - removed conflicting win32-specific alarm() functions ('win32' and 'sdl' gui) - feature now works in wx on win32 - Added support for gdb stub on big endian machine (patch by Godmar Back) - Rewritten obsolete hash_map code in dbg symbols module (patch from @SF) - BIOS: implemented missing INT 15h/89h (patch by Sebastian Herbszt) ------------------------------------------------------------------------- Changes in 2.4 (May 3, 2009): Brief summary : - Added graphical Bochs debugger frontend for most of the supported platforms. - Thanks for Chourdakis Michael and Bruce Ewing. - Many new CPU features in emulation - Support for > 32 bit physical address space and configurable MSRs - VMX, 1G pages in long mode, MOVBE instruction - Bugfixes for CPU emulation correctness, debugger and CPU instrumentation. - New config interface 'win32config' with start and runtime menu - USB: added OHCI support, external hub and cdrom - Added user plugin interface support. Detailed change log : - CPU and internal debugger - Support for VMX hardware emulation in Bochs CPU, to enable configure with --enable-vmx option Nearly complete VMX implementation, with few exceptions: - Dual-monitor treatment of SMIs and SMM not implemented yet - NMI virtualization, APIC virtualization not implemented yet - VMENTER to not-active state not supported yet - No advanced features like Extended Page Tables or VPID - Support for configurable MSR registers emulation, to enable configure with --enable-configurable-msrs option Look for configuration example in .bochsrc and msrs.def - Support new Intel Atom(R) MOVBE instruction, to enable configure with --enable-movbe option - Support for 1G pages in long mode, to enable configure with --enable-1g-pages option - Support for > 32 bit physical address space in CPU. Up to 36 bit could be seen in legacy mode (PAE) and up to 40 bit in x86-64 mode. Still support the same amount of the physical memory in the memory object, so system with > 4Gb of RAM yet cannot be emulated. To enable configure with --enable-long-phy-address option. - Implemented modern BIOSes mode limiting max reported CPUID function to 3 using .bochsrc CPU option. The mode is required in order to correctly install and boot WinNT. - Added ability to configure CPUID vendor/brand strings through .bochsrc (patch from @SF by Doug Reed). - Many bugfixes for CPU emulation correctness (both x86 and x86-64). - Updated CPU instrumentation callbacks. - Fixed Bochs internal debugger breakpoints/watchpoints handling. - Configure and compile - Added ability to choose Bochs log file name and Bochs debugger log file name from Bochs command line (using new -log and -dbglog options) - Removed Peter Tattam's closed source external debugger interface from the code. - Removed --enable-guest2host-tlb configure option. The option is always enabled for any Bochs configuration. - Removed --enable-icache configure option. The option is always enabled for any Bochs configuration. Trace cache support still remains optional and could be configured off. - Added configure option to compile in GUI frontend for Bochs debugger, to enable configure with --enable-debugger-gui option. The GUI debugger frontend is enabled by default with Bochs debugger. - Removed --enable-port-e9-hack configure option. The feature now could be configured at runtime through .bochsrc. - Added configure option to enable/disable A20 pin support. Disabling the A20 pin support slightly speeds up the emulation. - reduced dependencies between source files for faster code generation - BIOS - Added S3 (suspend to RAM) ACPI state to BIOS (patch by Gleb Natapov) - Implemented MTRR support in the bios (patches by Avi Kivity and Alex Williamsion with additions by Sebastian Herbszt) - Bug fixes - I/O Devices - Added user plugin support - remaining devices converted to plugins: pit, ioapic, iodebug - added 'plugin_ctrl' bochsrc option to control the presence of optional device plugins without a separate option. By default all plugins are enabled. - added register mechanism for removable mouse and keyboard devices - Hard drive / cdrom - PACKET-DMA feature now supported by all ATAPI commands - ATAPI command 0x1A added (based on the Qemu implementation) - sb16 - Added ALSA sound support on Linux (PCM/MIDI output) - FM synthesizer now usable with MIDI output (simple piano only) - Fixed OPL frequency to MIDI note translation - Fixed MIDI output command - keyboard - added keyboard controller commands 0xCA and 0xCB - USB - USB code reorganized to support more HC types and devices - added USB OHCI support written by Ben Lunt - added external USB hub support (initial code ported from Qemu) - added USB cdrom support (SCSI layer ported from Qemu) - added status bar indicators to show data transfer - VGA - VBE video memory increased to 16 MB - implemented changeable VBE LFB base address (PCI only, requires latest BIOS and VGABIOS images) - I/O APIC - implemented I/O APIC device hardware reset - Config interface - new config interface 'win32config' with start and runtime menu is now the default on Windows ('textconfig' is still available) - win32 device config dialogs are now created dynamicly from a parameter list (works like the wx ParamDialog) - changes in textcofig and the wx ParamDialog for compatibility with the new win32 dialog behaviour - Bochs param tree index keys are case independent now - some other additions / bugfixes in the simulator interface code - Misc - updated LGPL'd VGABIOS to version 0.6c - Updated Bochs TESTFORM to version 0.4 - SF patches applied [2784858] IO Handler names are not compared properly [2712569] Legacy bios serial data buffer timeout bug by grybranix [2655090] 64 bit BSWAP with REX.W broken by M. Eby [2645919] CR8 bug when reading by M. Eby [1895665] kvm: bios: add support to memory above the pci hole by Izik Eidus [2403372] rombios: check for valid cdrom before using it by Sebastian [2307269] acpi: handle S3 by Sebastian [2354134] TAP networking on Solaris/Sparc repaired [2144692] The scsi device can not complete its writing data command by naiyue [1827082] [PATCH] Configurable CPU vendor by Marcel Sondaar [2217229] Panic on EBDA overflow in rombios32 by Sebastian [2210194] Log pci class code by Sebastian [1984662] red led for disk write and titlebar mod by ggbsf [2142955] Fix for monitor/mwait by Doug Gibson [2137774] Patch to fix bug: cdrom: read_block: lseek returned error by Gabor Olah [2134642] Fix scan_to_scanascii table for F11 and F12 by Ben Guthro & Steve Ofsthun [2123036] sdl fullscreen fix by ggbsf [2073039] Remove CMOS accsess from AML code by Gleb Natapov [2072168] smbios: add L1-L3 cache handle to processor information by Sebastian [2055416] bochsrc cpu options for cpuid vendor and brand string by Doug Reed [2035278] rombios: Fix return from BEV via retf by Sebastian [2035260] rombios: El Torito load segment fix by Sebastian [2031978] Fix VMware backdoor command 0Ah by Jamie Lokier [2015277] Remove obsolete comment about DATA_SEG_DEFS_HERE hack by Sebastian [2011268] Set new default format and unit only if both are supported by Sebastian [2001919] gdbstub: fix qSupported reply by Sebastian [2001912] gdbstub: enclose packet data by apostrophes by Sebastian [1998071] fix missing SIGHUP and SIGQUIT with term ui on mingw by Sebastian [1998063] fix wrong colors with term ui by Sebastian [1995064] Compile fix needed for --enable-debugger and gcc 4.3 by Hans de Goede [1994564] Fix typo in RDMSR BX_MSR_MTRRFIX16K_A0000 by Sebastian [1994396] Change hard_drive_post #if by Sebastian [1993235] TESTFORM email address update by Sebastian [1992322] PATCH: fix compilation of bochs 2.3.7 on bigendian machines by Hans de Goede [1991280] Shutdown status code 0Ch handler by Sebastian [1990108] Shutdown status code 0Bh handler by Sebastian [1988907] Shutdown status code 0Ah handler by Sebastian [1984467] two typos in a release! (2.3.7) [1981505] Init PIIX4 PCI to ISA bridge and IDE by Sebastian - these S.F. bugs were closed/fixed [2784148] an integer overflow BUG of Bochs-2.3.7 source code [2695273] MSVC cpu.dsp failure in 2.3.7.zip [616114] Snapshot/Copy crash on Win2K [2628318] 'VGABIOS-latest' bug [1945055] can't 'make install' lastest bochs on loepard [2031993] Mac OS X Makefile bug [1843199] install error on mac osx [2710931] Problem compiling both instrumentation and debugger [2617003] ExceptionInfo conflicts with OS X api [2609432] stepping causes segfault (CVS) [2605861] compile error with --enable-smp [1757068] current cvs(Jul19, 07) failed to boot smp [2426271] cannot get correct symbol entry [2471982] VGA character height glitches [1659659] wrong behaviour a20 at boot [1998027] minwg + --with-term + --with-out-win32 = link failure [1871936] bochs-2.3.6 make fails on wx.cc [1684666] info idt for long mode [2105989] could not read() hard drive image file at byte 269824 [1173093] Debugger totally not supports x86-64 [1803018] new win32debug dialog problems [2141679] windows vcc build broken [2162824] latest cvs fails to compile [2164506] latest bochs fails to start [2129223] MOV reg16, SS not working in real mode due to dead code [2106514] RIS / startrom.com install ALMOST works [2123358] SMP (HTT): wbinvd executed by CPU1 crashes CPU0 [2002758] Arch Linux: >>PANIC<< ATAPI command with zero byte count [2026501] El Torito incorrect boot segment:offset [2029758] BEV can return via retf instead of int 18h [2010173] x command breaks after one error about x/s or x/i [1830665] harddrv PANIC: ATAPI command with zero byte count [1985387] fail to make using gcc4 with --enable-debugger [1990187] testform feedback [1992138] Misspell in cpu/ia_opcodes.h - these S.F. feature requests were closed/implemented [2175153] Update MSVC project files [658800] front end program and bios [1883370] Make cd and floppy images more usable [422783] change floppy size without restarting [2552685] param tree names should be case insensitive [1214659] PC Speaker emu turnoff. Plugin Controll. [1977045] support 40 bit physical address [1506385] Intel Core Duo VT features [1429015] Support for user plugins [1488136] debugger access to floppy controller [1363136] Full debugger SMP and 64 bit support [2068304] Support for ACPI [431032] debugger "x" command [423420] profiling ideas (SMF) [445342] Add FM support? [928439] alsa ------------------------------------------------------------------------- Changes in 2.3.7 (June 3, 2008): Brief summary : + More optimizations in CPU code - Bochs 2.3.7 is more than 2x faster than Bochs 2.3.5 build ! - Implemented LBA48 support in BIOS - Added memory access tracing for Bochs internal debugger - Implemented Intel(R) XSAVE/XRSTOR and AES instruction set extensions - Many fixes in CPU emulation and internal debugger - MenuetOS64 floppy images booting perfect again ! - updated LGPL'd VGABIOS to version 0.6b Detailed change log : - CPU - Support of XSAVE/XRSTOR CPU extensions, to enable configure with --enable-xsave option - Support of AES CPU extensions, to enable configure with --enable-aes option - Fixed Bochs failure on RISC host machines with BxRepeatSpeedups optimization enabled - Implemented SYSENTER/SYSEXIT instructions in long mode - More than 100 bugfixes for CPU emulation correctness (both x86 and x86-64) - MenuetOS64 floppy images booting perfect again ! - Updated CPU instrumentation callbacks - Bochs Internal Debugger and Disassembler - Added memory access tracing for Bochs internal debugger, enable by typing 'trace-mem on' in debugger command line - Many bug fixes in Bochs internal debugger and disassembler - System BIOS (Volker) - Implemented LBA48 support - Added generation of SSDT ACPI table that contains definitions for available processors - Added RTC device to ACPI DSDT table - Added implementation of SMBIOS - I/O devices (Volker) - VGA - Implemented screen disable bit in sequencer register #1 - Implemented text mode cursor blinking - Serial - new serial modes 'pipe-server' and 'pipe-client' for win32 - new serial mode 'socket-server' - Configure and compile - Fixed configure bug with enabling of POPCNT instruction, POPCNT instruction should be enabled by default when SSE4.2 is enabled. - Removed --enable-magic-breakpoint configure option. The option is automatically enabled if Bochs internal debugger is compiled in. It is still possible to turn on/off the feature through .bochsrc. - Allow boot from network option in .bochsrc - Added Bochs version info for Win32 - Display libraries - implemented text mode character blinking in some guis - improved 'X' gui runtime dialogs - SF patches applied [1980833] Fix shutdown status code 5h handler by Kevin O'Connor [1928848] "pipe" mode for serial port (win32 only) by Eugene Toder [1956843] Set the compatible pci interrupt router back to PIIX by Sebastian [1956366] Do not announce C2 & C3 cpu power state support by Igor Lvovsky [1921733] support for LBA48 by Robert Millan [1938185] Fix link problem with --enable-debugger by Sebastian [1938182] Makefile.in - use @IODEV_LIB_VAR@ by Sebastian [1928945] fix for legacy rombios - e820 map and ACPI_DATA_SIZE by Sebastian [1925578] rombios32.c - fix ram_size in ram_probe for low memory setup by Sebastian [1908921] rombios32.c - move uuid_probe() call by Sebastian [1928902] improvements to load-symbols by Eugene Toder [1925568] PATCH: msvc compilation by Eugene Toder [1913150] rombios.c - e820 cover full size if memory <= 16 mb by Alexander van Heukelum [1919804] rombios.c - fix and add #ifdef comments by Sebastian [1909782] rombios.c - remove segment values from comment by Sebastian [1908918] SMBIOS - BIOS characteristics fix by Sebastian [1901027] BIOS boot menu support (take 3) [1902579] rombios32.c - define pci ids by Sebastian [1859447] Pass segment:offset to put_str and introduce %S by Sebastian [1889057] rombios.c - boot failure message by Sebastian [1891469] rombios.c - print BEV product string by Sebastian [1889851] Win32 version information FILEVERSION for bochs.exe by Sebastian [1889042] rombios.c - fix comment by Sebastian [1881500] bochsrc, allow boot: network by Sebastian [1880755] Win32 version information for bochs.exe by Sebastian [1880471] SMBIOS fix type 0 by Sebastian [1878558] SMBIOS fixes by Sebastian [1864692] SMBIOS support by Filip Navara [1865105] Move bios_table_area_end to 0xcc00 by Sebastian [1875414] Makefile.in - change make use by Sebastian [1874276] Added instrumentation for sysenter/sysexit by Lluis [1873221] TLB page flush: add logical address to instrumentation by Lluis [1830626] lba32 support by Samuel Thibault [1861839] Move option rom scan after floppy and hard drive post by Sebastian [1838283] Early vga bios init by Sebastian [1838272] rom_scan range parameter by Sebastian [1864680] Save CPUID signature by Filip Navara - these S.F. bugs were closed [1976171] Keyboard missing break code for enter (0x9C) [666433] physical read/write breakpoint sometimes fails [1744820] info gdt and info idt shows the entire tables [1755652] graphics: MenuetOS64 shows black screen [1782207] Windows Installer malfunction, Host=Linux, Guest=Win98SE [1697762] OS/2 Warp Install Failed [1952548] String to char * warnings [1940714] SYSENTER/SYSEXIT doesn't work in long mode [1422342] SYSRET errors [1923803] legacy rombios - e820 map and ACPI_DATA_SIZE [1936132] Link problem with --enable-debugger & --enable-disasm [1934477] Linear address wrap is not working [1424984] virtual machine freezes in Bochs 2.2.6 [1902928] with debugger cpu_loop leaves CPU with unstable state [1898929] Bochs VESA BIOS violates specs (banks == 1) [1569256] bug in datasegment change in long mode [1830662] ACPI: no DMI BIOS year, acpi=force is required [1868806] VGA blink enable & screen disable [1875721] Bit "Accessed" in LDT/GDT descriptors & #PF [1874124] bx_Instruction_c::ilen() const [1873488] bochs-2.3.6 make fails on dbg_main.cc - these S.F. feature requests were implemented [1422769] SYSENTER/SYSEXIT support in x86-64 mode [1847955] Version information for bochs(dbg).exe [939797] SMBIOS support ------------------------------------------------------------------------- Changes in 2.3.6 (December 24, 2007): Brief summary : + More than 25% emulation speedup vs Bochs 2.3.5 release! - Thanks to Darek Mihocka (http://www.emulators.com) for providing patches and ideas that made the speedup possible! + Up to 40% speedup vs Bochs 2.3.5 release with trace cache optimization! - Lots of bugfixes in CPU emulation - Bochs benchmarking support - Added emulation of Intel SSE4.2 instruction set Detailed change log : - CPU - Added emulation of SSE4.2 instruction set, to enable use --enable-sse=4 --enable-sse-extension configure options to enable POPCNT instruction only use configure option --enable-popcnt - Implemented MTRR emulation, to enable use --enable-mtrr configure option. MTRRs is enabled by default when cpu-level >= 6. - Implemented experimental MONITOR/MWAIT support including optimized MWAIT CPU state and hardware monitoring of physical address range, to enable use --enable-monitor-mwait configure option. - Removed hostasm optimizations, after Bochs rebenchmarking it was found that the feature bringing no speedup or even sometimes slows down emulation! - Merged trace cache optimization patch, the trace cache optimization is enabled by default when configure with --enable-all-optimizations option, to disable trace cache optimization configure with --disable-trace-cache - Many minor bugfixes in CPU emulation (both ia32 and x86-64) - Updated CPU instrumentation callbacks - Bochs Internal Debugger and Disassembler - Many fixes in Bochs internal debugger and disassembler, some debugger interfaces significantly changed due transition to the param tree architecture - Added support for restoring of the CPU state from external file directly from Bochs debugger - Configure and compile - Renamed configure option --enable-4meg-pages to --enable-large-pages. The option enables page size extensions (PSE) which refers to 2M pages as well. - Removed --enable-save-restore configure option, save/restore feature changed to be one of the basic Bochs features and compiled by default for all configurations. - Added new Bochs benchmark mode. To run Bochs in benchmark mode execute it with new command line option 'bochs -benchmark time'. The emulation will be automatically stopped after 'time' millions of emulation cycles executed. - Another very useful option for benchmarking of Bochs could be enabled using new 'print_timestamps' directive from .bochsrc: print_timestamps: enable=1 - Added --enable-show-ips option to all configuration scripts used to build release binaries, so all future releases will enjoy IPS display. - Enable alignment check in the CPU and #AC exception by default for --cpu-level >= 4 (like in real hardware) - SF patches applied [1491207] Trace Cache Speedup patch by Stanislav [1857149] Define some IPL values by Sebastian [1850183] Get memory access mode in BX_INSTR_LIN_READ by Lluis Vilanova [1841421] pic: keep slave_pic.INT and master_pic.IRQ_in bit 2 in sync by Russ Cox [1841420] give segment numbers in exception logs by Russ Cox [1801696] Allow Intel builds on Mac OS X [1830658] Fix >32GB disk banner by Samuel Thibault [1813314] Move #define IPL_* and typedef ipl_entry by Sebastian [1809001] Save PnP Option ROM Product Name string in IPL Boot Table by Sebastian [1821242] Fix for #1801285, Niclist.exe broken by Sebastian [1819567] Code warning cleanup [1816162] Update comment on bios_printf() by Sebastian [1811139] Trivial Fix when BX_PCIBIOS and BX_ROMBIOS32 not defined by Myles Watson [1811190] Improve HD recognition and CD boot by Myles Watson [1811860] Implement %X in bios_printf by Sebastian [1809649] printf %lx %ld %lu by Myles Watson [1809651] move BX_SUPPORT_FLOPPY by Myles Watson [1809652] dpte and Int13DPT fixes by Myles Watson [1809669] clip cylinders to 16383 in hard drive by Myles Watson [1799903] Build BIOS on amd64 by Robert Millan [1799877] Fix for parallel build (make -j2) by Robert Millan - these S.F. bugs were closed [1837354] website bug: View the Source link broken [1801268] Reset from real mode no longer working [1843250] Using forward slashes gives invalid filename [1823446] BIOS bug, local APIC #0 not detected [1801285] Niclist.exe broken [1364472] breakpoints sometimes don't work [994451] breakpoint bug [1801295] NSIS installer vs Windows Notepad [1715328] Unreal mode quirk [1503972] debugger doesn't debug first instruction on exception [1069071] div al, byte ptr [ds:0x7c18] fails to execute [1800080] Wrong "BX_MAX_SMP_THREADS_SUPPORTED" assertion - these S.F. feature requests were implemented [1662687] Download for Win32-exe with x64 Mode and debugging [604221] Debugger command: query lin->phys mapping ------------------------------------------------------------------------- Changes in 2.3.5 (September 16, 2007): Brief summary : - Critical problems fixed for x86-64 support in CPU and Bochs internal debugger - ACPI support - The release compiled with x86-64 and ACPI - Hard disk emulation supports ATA-6 (LBA48 addressing, UDMA modes) - Added emulation of Intel SSE4.1 instruction set Detailed change log : - CPU - Fixed critical bug with 0x90 opcode (NOP) handling in x86-64 mode - implied stack references where the stack address is not in canonical form should causes a stack exception (#SS) - Added emulation of SSE4.1 instruction set (Stanislav) - Do not save and restore XMM8-XMM15 registers when not in x86-64 mode - Fixed zero upper 32-bit part of GPR in x86-64 mode - CMOV_GdEd should zero upper 32-bit part of GPR register even if the 'cmov' condition was false ! - Implemented CLFLUSH instruction, report non-zero cache size in CPUID - Fixed PUSHA/POPA instructions behavior in real mode - Fixed detection of inexact result by FPU - Fixed denormals-are-zero (DAZ) handling by SSE convert instructions - Implemented Misaligned Exception Mask support for SSE (MXCSR[17]) - Implemented Alignment Check in the CPU and #AC exception, to enable use --enable-alignment-check configure option - General - 2nd simulation support in wxBochs now almost usable (simulation cleanup code added and memory leaks fixed) - Configure and compile - several fixes for MacOSX, OpenBSD and Solaris 10 - enable save/restore feature by default for all configurations - reorganized SSE configure options to match Intel(R) Programming Reference Manual, new option introduced for SSE extensions enabling. To enable Intel Core Duo 2 new instructions use --enable-sse=3 --enable-sse-extension enabling of SSE4.1 (--enable-sse=4) will enable SSE3 extensions as well - removed old PIT, always use new PIT written by Greg Alexander, removed configure option --enable-new-pit - I/O devices (Volker) - Floppy - partial non-DMA mode support (patch by John Comeau) - Hard drive / cdrom - hard disk emulation now supports ATA-6 (LBA48 addressing, UDMA modes) - VMWare version 4 disk image support added (patch by Sharvil Nanavati) - PCI - initial support for the PIIX4 ACPI controller - Serial - added support for 3-button mouse with Mousesystems protocol - USB - experimental USB device change support added - rewrite of the existing USB devices code - new USB devices 'disk' and 'tablet' (ported from the Qemu project) - Bochs internal debugger - fixed broken debugger "rc file" option (execute debugger command from file) - implementation of a gui frontend ("windebug") for win32 started - gdbstub now accepts connection from any host - several documentation updates - a lot of disasm and internal debugger x86_64 support fixes - Configuration interface - fixes and improvements to the save state dialog handling - Display libraries - text mode color handling improved in some guis - win32 fullscreen mode (patch by John Comeau) - System BIOS (Volker) - 32-bit PM BIOS init code for ACPI, PCI, SMP and SMM (initial patches by Fabrice Bellard) - PCI BIOS function "find class code" implemented - SF patches applied [1791000] 15h 8600h is reading the wrong stack frame by Sebastian [1791016] rombios32.c, ram_probe(), BX_INFO missing value by Sebastian [1786429] typo in bochsrc.5 by Sebastian [1785204] Extend acpi_build_table_header to accept a revision number by Sebastian [1766536] Partial Patch for Bug Report 1549873 by Ben Lunt [1763578] ACPI Table Revision 0 -> 1 [1642490] implement alignment check and #AC exception by Stanislav Shwartsman [1695652] [PATCH] .pcap pktlog and vnet PXE boot by Duane Voth [1741153] Add expansion-ROM boot support to the ROMBIOS [1734159] Implemented INT15h, fn 0xC2 (mouse), subfn 3, set resolution [1712970] bios_printf %s fix [1573297] PUSHA/POPA real mode fix by Stanislav Shwartsman [1641816] partial support for non-DMA access to floppy by John Comeau [1624032] shows where write outside of memory occurred by John Comeau [1607793] allow fullscreen when app requests it by John Comeau [1603013] Bugfix for major NOP problem on x64 by mvysin [1600178] Make tap and tuntap compile on OpenBSD by Jonathan Gray [1149659] improve gdbstub network efficiency by Avi Kivity [1554502] Trivial FPU exception handling fix - these S.F. bugs were closed [1316008] Double faults when it shouldn't - gcc 4.0.2 [1787289] broken ABI for redolog class when enable-compressed-hd [1787500] tftp_send_optack not 64bit clean [1264540] Security issue with Bochs website [1767217] Debugger Faults including ud2 [1729822] Various security issues in io device emulation [1675202] mptable hosed (bad entry count in header) [1197141] 'make install' installs to bad location [1157623] x86Solaris10 cannot recoginize ACPI RSD PTR [1768254] large HDD in Bochs/bximage [1496157] Windows Vista Beta2 dosn't boot [1755915] Illegal Hard Disk Signature Output [1717790] info gdt and info idt scrolls away, too long result [1726640] Debugger displays incorrect segment for mov instruction [1719156] Typo in misc_mem.cpp [1715270] Debugger broken in/beyond 2.3 [1689107] v8086 mode priviledge check failed [1704484] A few checks when CPU_LEVEL < 4 [1678395] Problem with zero sector... [876990] SA-RTL OS fails on PIC configuration [1673582] save/restore didn't restore simulation correctly [1586662] EDD int 13h bug, modify eax [666618] POP_A Panic in DOS EMU [1001485] panic: not enough bytes on stack [1667336] delay times an order of magnitude slow [1665601] crash disassembling bootcode [1657065] CVS sources won't compile [1653805] bochs's gdbstub uses incorrect protocol [1640737] ASM sti command frezzes guest OS [1636439] latest CVS sources don't compile under Cygwin [1634357] disasm incorrect (no sign ext) displacement in 64-bit mode [1376453] pcidev segfaults bochs [1180890] IOAPIC in BOCHS - WinXP 64 in MP version [1597528] 2.3 fails to compile on amd64 [1526255] FLD1 broken when compaling with gcc 4.0.x [1597451] eth_fbsd is broken under FreeBSD [1571949] Bochs will not compile under Solaris [1500216] Bochs fails to boot BeOs CD [1458339] bochs-2.2.6 WinXP Binary ACPI error installing FreeBSD 6.0 [1440011] patches needed for FreeBSD 6.0 to compile Bochs [431674] some devices don't have a prefix [458150] QNX demo disk crashes with new pit [818322] Bochs 2.1 cvs: OS/2 - read verify on non disk [906840] KBD: bogus scan codes generated in set 3 [1005053] No keyboard codes translation [1109374] Problem with Scancodeset 2 [1572345] Bochs won't continue [1568153] Bochs looks for (and loads?) unspecified display libraries [1563462] Errors in /iodev/harddrv.h [1562172] TLB_init() fails to initialize priv_check array if USE_TLB 0 [1385303] debugger crashes after panic [1438227] crc.cpp missing in bx_debug version 2.2.6 [1501825] debugger crashes on to high input [1420959] Memory leak + buffer overflow in Bochs debugger [1553289] Error in Dis-assembler [542464] I cannot use FLAT [1548270] Bochs won't die with its pseudo terminal [1545588] roundAndPackFloatx80 does not detect round up correctly ------------------------------------------------------------------------- Changes in 2.3 (August 27, 2006): Brief summary : - limited save/restore support added (config + log options, hardware state) - configuration parameter handling rewritten to a parameter tree - lots of cpu and internal debugger fixes - hard disk geometry autodetection now supported by most of the image types - hard disk emulation now supports ATA-3 (multiple sector transfers) - VBE memory size increased to 8MB and several VGA/VBE fixes - updated LGPL'd VGABIOS to version 0.6a Detailed change log : - CPU and internal debugger fixes - Fixed bug in FSTENV instruction (Stanislav Shwartsman) - Recognize #XF exception (19) when SSE is enabled - Fixed bug in PSRAW/PSRAD MMX and SSE instructions - Save and restore RIP/RSP only for FAULT-type exceptions, not for traps - Correctly decode, disassemble and execute multi-byte NOP '0F F1' opcode - Raise A20 line after system reset (Stanislav Shwartsman) - Implemented SMI and NMI delivery (APIC) and handling in CPU (Stanislav) - Experimental implementation of System Management Mode (Stanislav) - Added emulation of SSE3E instructions (Stanislav Shwarstman) - Save and restore FPU opcode, FIP and FDP in FXSAVE/FRSTOR instructions - Fixed bug in MOVD_EdVd opcode (always generated #UD exception) - Fixed critical issue, Bochs was not supporting > 16 bit LDT.LIMIT values - Many fixes in Bochs internal debugger and disassembler - CPU x86-64 fixes - Fixed SYSRET instruction implementation - Fixed bug in CALL/JMP far through 64-bit callgate in x86-64 mode - Correctly decode, disassemble and execute 'XCHG R8, rAX' instruction - Correctly decode and execute 'BSWAP R8-R15' instructions - Fixed ENTER and LEAVE instructions in x86-64 mode (Stanislav) - Fixed CR4 exception condition (No Name) - Fixed x86 debugger to support x86-64 mode (Stanislav) - APIC and SMP - Support for Dual Core and Intel(R) HyperThreading Technology. Now you could choose amount of cores per processor and amount of HT threads per core from .bochsrc for SMP simulation (Stanislav Shwartsman) - Allow to control SMP quantum value through .bochsrc CPU option parameter. Previous Bochs versions used hardcoded quantum=5 value. - Fixed interrupt priority bug in service_local_apic() - Fixed again reading of APIC IRR/ISR/TMR registers. Finally it becomes fully correct :-) - Configure and compile - Moved configure time --enable-reset-on-triple-fault option to runtime, the 'cpu' option in .bochsrc is extended and the old configure option is deprecated (Stanislav Shwartsman) - Removed --enable-pni configure option, to compile with PNI use --enable-sse=3 instead (Stanislav Shwartsman) - enable SEP (SYSENTER/SYSEXIT) support by default for Penitum II+ processor emulation (i.e. if cpu-level >= 6 and MMX is enabled) - general - Limited save/restore support added. The state of CPU, memory and all devices can be saved now (state of harddisk images not handled yet). - Fixed several memory leaks - configuration interface - Configuration parameter handling rewritten to a parameter tree. This is required for dynamic menus/dialogs, user-defined options and save/restore. - Support for user-defined bochsrc options added - help support at the parameter prompt in textconfig added - I/O devices (Volker) - Floppy - partial sector transfers fixed - Hard drive / cdrom - several fixes to the IDE register behaviour (e.g. in case of a channel with only one drive connected) - fixed data alignment of 'growing' hard drive images (sharing images between Windows and Linux now possible) - disk geometry autodetection now supported by most of the image types (unsupported: external, dll and compressed modes) - multi sector read/write commands implemented - hard disk now reporting ATA-3 supported - ATAPI 'inquiry' now returns a unique device name - Keyboard - reset sent to keyboard has no effect on the 8042 (scancode translation) - PCI - forward PIRQ register changes to the I/O APIC (if present) - attempt to fix and update the emulation part of 'pcidev' (untested) - VGA - VBE memory size increased to 8MB and several VBE fixes - VGA memory read access fixed (bit plane access and read mode) - VGA memory is now a part of the common video memory - System BIOS (Volker) - enable interrupts before executing INT 19h - fixed ATA device detection in case of one drive only connected to controller - improved INT 15h function AX=E820h - real mode PCI BIOS now returns IRQ routing information (function 0Eh) - keyboard LED flags handling fixed and improved - fixed handling of extended keys in INT 09h - Updated LGPL'd VGABIOS to version 0.6a - SF patches applied [1340111] fixes and updates to usb support by Ben Lunt [1539420] minor addition to pci_usb code by Ben Lunt [1455958] call/jmp through call gate in 64-bit mode [1433107] PATCH: fix compile with wxwindows 2.6 (unicode / utf8) by jwrdegoede [1386671] Combined dual core and hyper-threading patch - these S.F. bugs were closed [833927] TTD: System Error TNT.40025: Unexpected processor exception [789230] Sending code that shows lock up when setting idt [909670] Problems with Symantec Ghost [1540241] include missing in osdep.cc [1539373] Incorrect disasm for "mov moffset,bla" in 64bit [1538419] incorrect disassembly of [rip+disp] with rex.b [1535432] shift+cursor key maps to a digit [1504891] Knoopix 5.0.1 error [1424355] bochs-2.2.6 ata failure in windoze 98se [1533979] wrong disassembly of IN instruction [620059] paste won't stop [1164904] status bar doesn't show num/caps/scroll lock status [1061720] ATA Support level for HD [1522196] Broken CHANGES link in main page [1438415] crash if screen scrolled downwards [778441] Shouldn't interrupts be enable after BIOS? [1514949] I got a problem with the 8253 timer [1513544] disasm of 0xec (in AL,DX) returns ilen of 2 instead of 1 [1508947] APIC interrupt priority checking and interrupt delivery [766286] Debugger halts after any GPF exception [639143] va_list is not a pointer on linuxppc [1501815] debugger examines memory over page-boundary wrong [1503978] movsb/w/d doesn't work when direction is stored [1499405] WinPCap has changed URL hosting [1498519] APIC IRR bits not set while interrupts disabled [1498193] Bochs segfaults on LTR instruction [787140] Guest2HostTLB optimization bug [1492070] instrument stop [1487772] No SEP on P4 [1488335] Growing hard disk images severe interoperability errors! [1076312] Shadow RAM and TLB [1282249] The real i440FX chipset Award bios hangs [1479763] mistake "mov ax,[es:di]" for "mov ax,[ds:di]" [1453575] Misconfigured floppy DMA transfers do not terminate. [1460068] Incorrect handling for the Options Menu Item [910203] bochs-2.1.1 wx.lo failed [1438654] PANIC when trying to run install-amd64-minimal-2005.0.iso [1458320] compile hdimage.h fails [1455880] bochs-2.2.6,2: make error on FreeBSD [696890] Network wouldn't run under W2k hosting MSDOS [673391] SMP timer problems [1291059] wxWindows GUI on non-windows/configure issue [1356450] bochs 2.2.1 errors-omittions [1178017] Win98 guest cannot receive network packets from host [1076315] a20_mask after restarting [1436323] real hw does not panic when bad Ib in CMPSS_VssWssIb [1435269] cdrom_amigaos is not compilable [1433314] disasm issues [1170614] relative jumps/calls wrong in debugger [758121] user might get confused when interrupt handler invoked [1170622] You cannot toggle OFF "show" flags [1406387] JMP instruction should display absolute address [1428813] PANIC: ROM address space out of range [1426288] DR-DOSs EMM386 problem [1412036] Bochs cannot recognize PCI NIC correctly [435115] dbg: modebp broken and no docs [1419366] disasm cs:eip does not work anymore [1419393] SSE's #XF exception -> "exception(19): bad vector" [1419429] disassembly of "260f6f00" show DS: instead of ES: prefix [1417583] Interrupt behaviour changed from 2.2.1 to 2.2.5 [1418281] 'push' (6A) incorrectly disassembled [1417791] FLDENV generating exception when real hw does not. [1264583] OS/2 1.1 doesn't run ------------------------------------------------------------------------- Changes in 2.2.6 (January 29, 2006): - First major SMP release ! - several APIC and I/O APIC fixes make SMP Bochs booting Windows NT4.0 or Knoppix 4.0.2 without noapic kernel option in SMP configuration. - critical APIC timer bug fixed - obsolete SMP BIOS images removed (MP tables created dynamicaly) - determine number of processors in SMP configuration through .bochsrc new .bochsrc option 'CPU' allows to choose number of processors to emulate - new configure option --enable-smp to configure Bochs for SMP support, the old --enable-processors=N option is deprecated - CPU and internal debugger fixes - enabled #PCE bit in CR4 register, previosly setting of this bit generated #GP(0) fault - enabled LAHF/SAHF instructions in x86-64 mode - fixed bug in PMULUDQ SSE2 instruction - fixes in Bochs debugger - Configure and compile - enable VME (virtual 8086 mode extensions) by default if cpu-level >= 5 - enable Bochs disassembler by default for all configurations - win32 installer script improvements - ips parameter moved to new 'CPU' option - show IPS value in status bar if BX_SHOW_IPS is enabled - Other - several fixes in the hard drive, keyboard, timer, usb and vga code - new user button shortcut "bksl" (backslash) - updated Bochs instrumentation examples - user and development documentation improved ------------------------------------------------------------------------- Changes in 2.2.5 (December 30, 2005): Brief summary : - added virtual 8086 mode extensions (VME) implementation - several fixes/improvements in x86-64 emulation, debugger and disassembler - new serial mode 'socket' connects a network socket - IDE busmaster DMA feature for harddisks and cdroms completed and enabled - many improvements in Bochs emulated I/O devices (e.g. floppy, cdrom) - Updated LGPL'd VGABIOS to version 0.5d Detailed change log : - CPU - fixed XMM registers restore in FXRSTOR instruction (Andrej Palkovsky) - print registers dump to the log if tripple fault occured - fixed PANIC in LTR instruction (Stanislav) - added virtual 8086 mode extensions (VME) implementation, to enable configure with --enable-vme (Stanislav) - flush caches and TLBs when executing WBINVD and INVD instructions - do not modify segment limit and AR bytes when modifying segment register in real mode (support for unreal mode) - fixed init/reset values for LDTR and TR registers - reimplemented hardware task switching mechanism (Stanislav) - generate #GP(0) when fetching instruction cross segment boundary - CPU (x86-64) (Stanislav Shwartsman) - implemented call_far/ret_far/jmp_far instructions in long mode - fixed IRET operation in long mode - fixed bug prevented setting of NXE/FFXSR bits in MSR.EFER register - implemented RDTSCP instruction - do not check CS.limit when prefetching instructions in long mode - fixed masked write instructions (MASKMOVQ/MASKMOVDQU) in long mode - fetchdecode fixes for x86-64 - APIC - Fixed bug in changing local APIC id (Stanislav) - Fixed reading of IRR/ISR/TMR registers (patch by wmrieker) - Implemented spurious interrupt register (Stanislav, patch by wmrieker) - Fixed interrupt delivery bug (anonymous #SF patch) - Correctly implemented ESR APIC register (Stanislav) - Bochs debugger - Fixed bug in bochs debugger caused breakpoints doesn't fire sometimes (Alexander Krisak) - watchpoints in device memory fixed (Nickolai Zeldovich) - new debug interface to access Bochs CPU general purpose registers with support for x86-64 - Disassembler (Stanislav Shwartsman) - Fixed disassembly for FCOMI/FUCOMI instructions - Full x86-64 support in disassembler. The disassembler module extended to support x86-64 extensions. Still limited by Bochs debugger which is not supporting x86-64 at all ;( - I/O devices (Volker) - general - memory management prepared for large BIOS images (up to 512k) - slowdown timer sleep rate fixed (now using 1 msec on all platforms) - some device specific parameter handlers moved into the device code - serial - new serial mode 'socket' connects a network socket (#SF patch by Andrew Backer) - hard drive / cdrom - assign a unique serial number to each drive (fixes harddrive detection problems with Linux kernels 2.6.x: "ignoring undecoded slave") - geometry autodetection for 'flat' hard disk images added. Works with images created with bximage (heads = 16, sectors per track = 63) - ATAPI command 'read cd' implemented, some other commands improved - cdrom read block function now tries up to 3 times before giving up - emulation of raw cdrom reads added, some other lowlevel cdrom fixes - IDE busmaster DMA feature for harddisks and cdroms completed and enabled - disk image size limit changed from 32 to 127 GB - split ATA/ATAPI emulation code and image handling code - floppy - fixes for OS/2 (patch by Robin Kay) - disk change line behaviour fixed (initial patch by Ben Lunt) - end-of-track (EOT) condition handling implemented - more accurate timing for read/write data and format track commands using a motor speed of 300 RPM - timing of recalibrate and seek commands now depends on the step rate, date rate and the steps to do - floppy controller type changed to 82077AA - cmos - RTC 12-hour and binary mode implemented - number of CMOS registers changed from 64 to 128 - bochsrc option 'cmosimage' improved - save cmos image on exit if enabled - speaker - simple speaker support for OS X added (patch by brianonn@telus.net) - pci - BeOS boot failure fix in the PCI IDE code - don't register i/o and memory regions during PCI probe - vga - memory allocation for vga extensions fixed - usb - some bugfixes by Ben Lunt (mouse and keypad are usable now) - networking modules - VDE networking module now enabled on Linux - display libraries - general - new syntax for the userbutton shortcut string and more keys supported - win32 - fixed keycode generation for right alt/ctrl/shift keys - runtime dialog is now a property sheet - x11 - simple dialog boxes for the "ask" and "user shortcut" feature implemented - Slovenian keymap added (contributed by Mitja Ursic) - configuration interface - ask dialog is now enabled by default for win32, wx and x display libraries - bochsrc option floppy_command_delay is obsolete now (floppy timing now based on hardware specs) - floppy image size detection now available in the whole config interface - some device specific parameter handlers moved into the device code - calculate BIOS ROM start address from image if not specified - System BIOS (Volker) - PCI i/o and memory base address initialization added - several keyboard interrupt handler fixes (e.g. patch by japheth) - several floppy fixes (e.g. OS/2 works with patch by Robin Kay) - some more APM functions added - Updated LGPL'd VGABIOS to version 0.5d - generate SMP specific tables dynamicly by the Bochs memory init code - SF patches applied [1389776] Disk sizes over 64 Gbytes by Andrzej Zaborowski [1359162] disasm support for x86-64 by Stanislav Shwartsman [857235] task priority and other APIC bugs, etc by wmrieker [1359011] build breaks for 386 + debugger + disasm by shirokuma [1352761] Infinite loop when trying to debug a triple exception [1311170] small APIC bug fix (interrupt sent to the wrong CPU) [1309763] Watchpoints don't work in device memory by Nickolai Zeldovich [1294930] change line status on floppy by Ben Lunt [1282033] SSE FXRESTORE not working correctly by Ondrej Palkovsky [816979] wget generalizations by Lyndon Nerenberg [1214886] No more pageWriteStamp / unified icache by H. Johansson [1107945] com->socket redirection support by Andrew Backer - these S.F. bugs were closed [669180] win95 install : unknown SET FEATURES subcommand 0x03 [1346692] bochs 2.2.1 VGA BIOS error [1354963] floppy in KolibriOS [1378204] error: bochs-2.2.1, --enable-sb16, --disable-gameport [1368412] VDE problems in BOCHS [533446] CPU and APIC devices appear twice [1000796] bximage fails to create image of specified size [1170793] Quarterdeck QEMM doesn't work [923704] Multiple opcode prefixes don't reflect Trap 13 [1166392] DocBook/documentation issues [1368239] broken grater than 4GB size of sparse type hd image [1365830] i386 compile breaks on paging [427550] Incomplete IRETD implementation [1215081] MSVC workspace STILL not fixed [736279] Jump to Task [1356488] FD change fail & occur error [957615] [CPU ] prefetch: RIP > CS.limit [1353866] not booting linux-2.6.14 [1351667] load32bitOSImage does not work with --enable-x86-debugger [1217476] Incorrect (?) handling of segment registers in real mode [1184711] OS2 DOS crash [2.2.pre2] [624330] support for disks > 32GiB [1348368] bochs 2.2.1 bximage error [1342081] Configuration Menu option failed [1138616] OS/2 Warp 4 hangs when booting [1049840] mouse and video conflict [1164570] Unable to perform Fedora Core 4 test 1 installation [1183201] Windows 2000 (MSDN build 2150?) does not completely install [1194284] Can't boot from CD-ROM (Windows NT) [962969] Windows NT crashes while trying to intall them. [1054594] WinXP install halts (redo) [1153107] Windows XP fails with BSOD on 'vga' [938518] Win XP installation fails [645420] getHostMemAddr vetoed direct read [1179985] MS XENIX: >>PANIC<< VGABIOS panic at vgabios.c, line 0 [1329600] WBINVD and INVD should flush caches and TLB [638924] eliminate BX_USE_CONFIG_INTERFACE [1048711] Funny behaviour with CTRL [1288450] keyboard BIOS error [1310706] Keyboard - about key SHIFT [1295981] Ubuntu 5.04 Live-CD won't boot in Bochs [879047] APIC timer behavior different before reset and after [1188506] I still can't install the german Windows XP! [1301847] Windows XP dosn't boot - FXRSTOR problem ? [661259] does not boot QNX under WinX [924412] Keyboard lock states all whacked [681127] MIPSpro compiler (IRIX) is allergic to ^M [1285923] BIOS keyboard handler [516639] ATA controller revisited... [657918] does not boot BeOS under WinX [649245] BeOS CD locks halfway on boot [1094385] Attachment for bug 1090339 (beos failure) [1183196] BeOS 4.5 developer CD does not install [1090339] BeOS fails to boot [639484] panics when int 13 is called [711701] divide by zero [704295] ATAPI/BIOS call missing [682856] hard drive problems [627691] Cursor keys problem [588011] keyboard not working [542260] os/2 warp crashes with floppy handling [1273878] SB16 doesn't work in pure DOS [542254] OS/2 FDC driver dies [1099610] Windows 98 SE Does not install [875479] cr3 problem on task switch [731423] NE2000 causing PANIC on Win2K detection [1156155] bochs fails to boot plan9 iso [1251979] --enable-cpu-level=3 should assume --without-fpu [1257538] Interupt 15h 83h - set wait event interval [658396] Panic for DR DOS emm386 [679339] /? doesn't divulge Bochs command-line syntax [1167016] call/jump/return_protected doesn't support x86-64 [1252432] Mac OS X compile bug [881442] Bochs 2.1 PANIC when loading DOS Turbo Pascal protected mode [1249324] Boch2.2.1 Buffer Overfollow in void bx_local_apic_c::init () [1197144] 'make install' has dependency on wget [1079595] LTR:386TSS: loading tr.limit < 103 [1244070] Compilation Error in gui/rfb.cc [761707] CPU error when trying to start Privateer [517281] Crash running Privateer in DOS... ------------------------------------------------------------------------- Changes in 2.2.1 (July 8, 2005): - Fixed several compilation warnings and errors for different platforms (Volker) - Fixed FPU tag word restore in FXRSTOR instruction (Stanislav) - Added missing scancodes for F11 and F12 to BIOS translation table (Volker) - Bochs disassembler bugfixes (h.johansson) - About 5% emulation speed improvement (h.johansson) - Handle writing of zero to APIC timer initial count register (Stanislav) - Enable Idle-Hack for 'TERM' GUI (h.johansson) - Reduced overhead of BX_SHOW_IPS option to minimum. Now every simulation could run with --enable-show-ips without significant performance penalty. (Stanislav) - Fixed pcipnic register access (Volker) - Limited write support for TFTP server in 'vnet' networking module added (Volker) - Changed some timing defaults to more useful values (Volker) - WinXP/2003 style common controls now supported (Vitaly Vorobyov) - Updated LGPL'd VGABIOS to version 0.5c (Volker) - Added new BX_INSTR_HLT callback to instrumentation (Stanislav) ------------------------------------------------------------------------- Changes in 2.2 (May 28, 2005): Brief summary : - New floating point emulator based on SoftFloat floating point emulation library. - improved x86-64 emulation - Cirrus SVGA card emulation added - status bar with indicators for keyboard, floppy, cdrom and disk (gui dependant) - many improvements in Bochs emulated I/O devices (e.g. PCI subsystem) Detailed change log : - CPU - fixes for booting OS/2 by Dmitri Froloff - fixed v8086 priveleged instruction processing bug (was also reported by LightCone Aug 7 2003) - exception process bug (was reported by Diego Henriquez Sat Nov 15 01:16:51 CET 2003) - segment validation with IRET instruction - CS segment not present exception processing with IRET - several fixes by Kevin Lawton - add MSVC host asm instructions (patch by suzu) - fixed bug in HADDPD/HSUBP
1. Introduction to Zend Framework 1.1. 概述 1.2. 安装 2. Zend_Acl 2.1. 简介 2.1.1. 关于资源(Resource) 2.1.2. 关于角色(Role) 2.1.3. 创建访问控制列表(ACL) 2.1.4. 注册角色(Role) 2.1.5. 定义访问控制 2.1.6. 查询 ACL 2.2. 精细的访问控制 2.2.1. 精细的访问控制 2.2.2. 除去访问控制 2.3. 高级用法 2.3.1. 保存 ACL 数据确保持久性 2.3.2. 使用声明(Assert)来编写条件性的 ACL 规则 3. Zend_Auth 3.1. 简介 3.1.1. 适配器 3.1.2. 结果 3.1.3. 身份的持久(Persistence) 3.1.3.1. 在PHP Session 中的缺省持久(Persistence) 3.1.3.2. 实现订制存储 3.1.4. 使用Zend_Auth 3.2. 数据库表认证 3.2.1. 简介 3.2.2. 高级使用:持久一个 DbTable 结果对象 3.2.3. 高级用法示例 3.3. 摘要式认证 3.3.1. 简介 3.3.2. 规范(Specifics) 3.3.3. 身份(Identity) 3.4. HTTP 认证适配器 3.4.1. 简介 3.4.2. 设计回顾 3.4.3. 配置选项 3.4.4. Resolvers 3.4.4.1. 文件 Resolver 3.4.5. 基本用法 4. Zend_Cache 4.1. 简介 4.2. 缓存原理 4.2.1. Zend_Cache 工厂方法 4.2.2. 标记纪录 4.2.3. 缓存清理 4.3. Zend_Cache前端 4.3.1. Zend_Cache_Core 4.3.1.1. 简介 4.3.1.2. 可用选项 4.3.1.3. 例子 4.3.2. Zend_Cache_Frontend_Output 4.3.2.1. 简介 4.3.2.2. 可用的选项 4.3.2.3. 例子 4.3.3. Zend_Cache_Frontend_Function 4.3.3.1. Introduction 4.3.3.2. A可用的选项 4.3.3.3. 例子 4.3.4. Zend_Cache_Frontend_Class 4.3.4.1. Introduction 4.3.4.2. Available options 4.3.4.3. Examples 4.3.5. Zend_Cache_Frontend_File 4.3.5.1. Introduction 4.3.5.2. Available options 4.3.5.3. Examples 4.3.6. Zend_Cache_Frontend_Page 4.3.6.1. Introduction 4.3.6.2. Available options (for this frontend in Zend_Cache factory) 4.3.6.3. Examples 4.4. Zend_Cache后端 4.4.1. Zend_Cache_Backend_File 4.4.2. Zend_Cache_Backend_Sqlite 4.4.3. Zend_Cache_Backend_Memcached 4.4.4. Zend_Cache_Backend_Apc 4.4.5. Zend_Cache_Backend_ZendPlatform 5. Zend_Config 5.1. 简介 5.2. 操作理论 5.3. Zend_Config_Ini 5.4. Zend_Config_Xml 6. Zend_Console_Getopt 6.1. Getopt 简介 6.2. 声明 Getopt 规则 6.2.1. 用短语法声明选项 6.2.2. 用长语法声明选项 6.3. 读取(Fetching)选项和参数 6.3.1. 操作 Getopt 异常 6.3.2. 通过名字读取 (Fetching)选项 6.3.3. 报告选项 6.3.4. 读取非选项参数 6.4. 配置 Zend_Console_Getopt 6.4.1. 添加选项规则 6.4.2. 添加帮助信息 6.4.3. 添加选项别名 6.4.4. 添加参数列表 6.4.5. 添加配置 7. Zend_Controller 7.1. Zend_Controller 快速入门 7.1.1. 简介 7.1.2. 入门 7.1.2.1. 文件系统的组织结构 7.1.2.2. 设置文件根目录 7.1.2.3. 创建URL重写规则 7.1.2.4. 创建你的bootstrap文件 7.1.2.5. 创建默认的控制器(Action Controller) 7.1.2.6. 创建你的视图脚本 7.1.2.7. 创建你自己的错误控制器 7.1.2.8. 访问站点! 7.2. Zend_Controller 基础 7.3. 前端控制器 7.3.1. 概述 7.3.2. 主要方法 7.3.2.1. getInstance() 7.3.2.2. setControllerDirectory() 和 addControllerDirectory() 7.3.2.3. dispatch() 7.3.2.4. run() 7.3.3. 环境访问器方法 7.3.4. 前端控制器参数 7.3.5. 继承前端控制器 7.4. 请求对象 7.4.1. 介绍 7.4.2. HTTP 请求 7.4.2.1. 访问请求数据 7.4.2.2. 基地址和子目录 7.4.2.3. 决定请求方式 7.4.2.4. 删除 AJAX 请求 7.4.3. 子类化请求对象 7.5. 标准路由器:Zend_Controller_Router_Rewrite 7.5.1. 简介 7.5.2. 使用路由器 7.5.3. 基本的Rewrite路由器操作 7.5.4. 缺省路由 7.5.5. 基本 URL 和子目录 7.5.6. Route Types 7.5.6.1. Zend_Controller_Router_Route 7.5.6.1.1. 变量缺省 7.5.6.1.2. 变量请求 7.5.6.2. Zend_Controller_Router_Route_Static 7.5.6.3. Zend_Controller_Router_Route_Regex 7.5.7. 使用 Zend_Config with the RewriteRouter 7.5.8. Subclassing the Router 7.6. 分发器 7.6.1. 概述 7.6.2. 子类化分发器 7.7. 动作控制器 7.7.1. 简介 7.7.2. 对象初始化 7.7.3. 派遣前后的钩子 7.7.4. 访问器 7.7.5. 视图集成 7.7.5.1. 视图初始化 7.7.5.2. 解析(Rendering)视图 7.7.6. 实用方法 7.7.7. 继承(Subclassing)动作控制器 7.8. 动作助手 7.8.1. 介绍 7.8.2. 初始化助手 7.8.3. 助手经纪人 7.8.4. 内建的动作助手 7.8.4.1. 动作堆栈(助手) 7.8.4.2. AutoComplete 7.8.4.2.1. AutoCompletion with Dojo 7.8.4.2.2. AutoCompletion with Scriptaculous 7.8.4.3. ContextSwitch and AjaxContext 7.8.4.3.1. 缺省可用的上下文 7.8.4.3.2. 创建定制的上下文 7.8.4.3.3. 为每个动作设置上下文 7.8.4.3.4. 初始化上下文开关 7.8.4.3.5. 另外的功能 7.8.4.3.6. AjaxContext 函数 7.8.4.4. FlashMessenger 7.8.4.4.1. 简介 7.8.4.4.2. Basic Usage Example 7.8.4.5. JSON 7.8.4.6. 转向器(Redirector) 7.8.4.6.1. 介绍 7.8.4.6.2. 基础用例 7.8.4.7. ViewRenderer 7.8.4.7.1. 介绍 7.8.4.7.2. API 7.8.4.7.3. 基础用法示例 7.8.4.7.4. 高级用法示例 7.8.5. 编写自己的助手 7.9. 响应对象 7.9.1. 用法 7.9.2. 处理消息头 7.9.3. 命名片段 7.9.4. 在响应对象中测试异常 7.9.5. 子类化响应对象 7.10. 插件 7.10.1. 简介 7.10.2. 编写插件 7.10.3. 使用插件 7.10.4. 获取和控制插件 7.10.5. 包含在标准发行包中的插件 7.10.5.1. 动作堆栈 7.10.5.2. Zend_Controller_Plugin_ErrorHandler 7.10.5.2.1. 使用 ErrorHandler 作为一个 404 处理器(handler) 7.10.5.2.2. 处理以前呈现的(rendered)输出 7.10.5.2.3. 插件用法示例 7.10.5.2.4. 错误控制器示例 7.11. 使用传统的模块目录结构 7.11.1. 简介 7.11.2. 指定模块控制器目录 7.11.3. Routing to modules 7.11.4. 模块或全局缺省控制器 7.12. MVC 异常 7.12.1. 介绍 7.12.2. 如何处理异常? 7.12.3. 可能遭遇的MVC异常 7.13. 从以前的版本移植 7.13.1. 从 1.0.x 到 1.5.0 或更新的版本的移植 7.13.2. 从 0.9.3 到 1.0.0RC1 或更新的版本的移植 7.13.3. 从 0.9.2 移植到 0.9.3 或更新的版本 7.13.4. 从 0.6.0 移植到 0.8.0 或更新的版本 7.13.5. 从 0.2.0 或以前的版本移植到 0.6.0 8. Zend_Currency 8.1. Zend_Currency 简介 8.1.1. 为什么使用 Zend_Currency ? 8.2. 如何使用货币 8.2.1. 从货币创建输出 8.2.2. 修改货币格式 8.2.3. Zend_Currency 的信息方法 8.2.4. 设置新缺省值 8.2.5. 加速 Zend_Currency 8.3. 从前面的版本迁移 8.3.1. 从 1.0.2 到 1.0.3 或更新的迁移 9. Zend_Date 9.1. Introduction 9.1.1. Always Set a Default Timezone 9.1.2. Why Use Zend_Date? 9.2. 操作理论 9.2.1. 内部(Internals) 9.3. Basic Methods 9.3.1. The current date 9.3.2. Zend_Date by Example 9.3.2.1. Ouput a Date 9.3.2.2. Setting a Date 9.3.2.3. Adding and Subtracting Dates 9.3.2.4. Comparation of dates 9.4. Zend_Date API Overview 9.4.1. Zend_Date Options 9.4.1.1. Selecting the date format type 9.4.1.2. DST and Date Math 9.4.1.3. Month Calculations 9.4.1.4. Speed up date localization and normalization with Zend_Cache 9.4.1.5. Receiving syncronised timestamps with Zend_TimeSync 9.4.2. Working with Date Values 9.4.3. Basic Zend_Date Operations Common to Many Date Parts 9.4.3.1. List of Date Parts 9.4.3.2. List of Date Operations 9.4.4. Comparing Dates 9.4.5. Getting Dates and Date Parts 9.4.6. Working with Fractions of Seconds 9.4.7. Sunrise / Sunset 9.5. Creation of dates 9.5.1. Create the actual date 9.5.2. Create a date from database 9.5.3. Create dates from an array 9.6. Constants for General Date Functions 9.6.1. Using Constants 9.6.2. List of All Constants 9.6.3. Self-Defined OUTPUT Formats with ISO 9.6.4. Self-defined OUTPUT formats using PHP's date() format specifiers 9.7. Working examples 9.7.1. Checking dates 9.7.2. Sunrise and Sunset 9.7.3. Timezones 10. Zend_Db 10.1. Zend_Db_Adapter 10.1.1. 简介 10.1.2. 添加引号防止数据库攻击 10.1.3. 直接查询 10.1.4. 事务处理 10.1.5. 插入数据行 10.1.6. 更新数据行 10.1.7. 删除数据行 10.1.8. 取回查询结果 10.2. Zend_Db_Statement 10.2.1. Creating a Statement 10.2.2. Executing a Statement 10.2.3. Fetching Results from a SELECT Statement 10.2.3.1. Fetching a Single Row from a Result Set 10.2.3.2. Fetching a Complete Result Set 10.2.3.3. Changing the Fetch Mode 10.2.3.4. Fetching a Single Column from a Result Set 10.2.3.5. Fetching a Row as an Object 10.3. Zend_Db_Profiler 10.3.1. Introduction 10.3.2. Using the Profiler 10.3.3. Advanced Profiler Usage 10.3.3.1. Filter by query elapsed time 10.3.3.2. Filter by query type 10.3.3.3. Retrieve profiles by query type 10.4. Zend_Db_Select 10.4.1. 简介 10.4.2. 同一表中查询多列数据 10.4.3. 多表联合查询 10.4.4. WHERE条件 10.4.5. GROUP BY分句 10.4.6. HAVING 条件 10.4.7. ORDER BY 分句 10.4.8. 通过总数和偏移量进行LIMIT限制 10.4.9. 通过页数和总数进行LIMIT限制 10.5. Zend_Db_Table 10.5.1. 简介 10.5.2. 开始 10.5.3. 表名和主键 10.5.4. 插入数据 10.5.5. 更新数据 10.5.6. Deleting Rows 10.5.7. 根据主键查找数据 10.5.8. 取回一条记录 10.5.9. 取回多条记录 10.5.10. Adding Domain Logic 10.6. Zend_Db_Table_Row 10.6.1. 简介 10.6.2. 取回一条记录 10.6.3. 修改数据 10.7. Zend_Db_Table_Rowset 10.7.1. 简介 10.7.2. 取回结果集 10.7.3. 遍历结果集 10.8. Zend_Db_Table Relationships 10.8.1. Introduction 10.8.2. Defining Relationships 10.8.3. Fetching a Dependent Rowset 10.8.4. Fetching a Parent Row 10.8.5. Fetching a Rowset via a Many-to-many Relationship 10.8.6. Cascading Write Operations 10.8.6.1. Notes Regarding Cascading Operations 11. Zend_Debug 11.1. 输出变量的值 (Dumping Variables) 12. Zend_Exception 12.1. 使用“异常” 13. Zend_Feed 13.1. 介绍 13.2. 导入Feeds 13.2.1. 定制 feeds 13.2.1.1. 导入定制的数组 13.2.1.2. 导入定制的数据源 13.2.1.3. Dumping feed 内容 13.3. 从网页上获得Feed 13.4. RSS Feed的使用 13.5. Atom Feed的使用 13.6. 单个Atom条目的处理 13.7. 修改Feed和条目结构 13.8. 自定义Feed和条目类 14. Zend_Filter 14.1. 简介 14.1.1. 什么是过滤器(filter)? 14.1.2. 过滤器的基本用法 14.1.3. 使用静态 get() 方法 14.2. 标准过滤器类 14.2.1. Alnum 14.2.2. Alpha 14.2.3. BaseName 14.2.4. Digits 14.2.5. Dir 14.2.6. HtmlEntities 14.2.7. Int 14.2.8. RealPath 14.2.9. StringToLower 14.2.10. StringToUpper 14.2.11. StringTrim 14.2.12. StripTags 14.3. 过滤器链 14.4. 编写过滤器 14.5. Zend_Filter_Input 14.5.1. Declaring Filter and Validator Rules 14.5.2. Creating the Filter and Validator Processor 14.5.3. Retrieving Validated Fields and other Reports 14.5.3.1. Querying if the input is valid 14.5.3.2. Getting Invalid, Missing, or Unknown Fields 14.5.3.3. Getting Valid Fields 14.5.4. Using Metacommands to Control Filter or Validator Rules 14.5.4.1. The FIELDS metacommand 14.5.4.2. The PRESENCE metacommand 14.5.4.3. The DEFAULT_VALUE metacommand 14.5.4.4. The ALLOW_EMPTY metacommand 14.5.4.5. The BREAK_CHAIN metacommand 14.5.4.6. The MESSAGES metacommand 14.5.4.7. Using options to set metacommands for all rules 14.5.5. Adding Filter Class Namespaces 14.6. Zend_Filter_Inflector 14.6.1. Operation 14.6.2. Setting Paths To Alternate Filters 14.6.3. Setting the Inflector Target 14.6.4. Inflection Rules 14.6.4.1. Static Rules 14.6.4.2. Filter Inflector Rules 14.6.4.3. Setting Many Rules At Once 14.6.5. Utility Methods 14.6.6. Using Zend_Config with Zend_Filter_Inflector 15. Zend_Form 15.1. Zend_Form 15.2. Zend_Form 快速起步 15.2.1. 创建表单对象 15.2.2. 添加表单元素 15.2.3. 解析(Render)表单 15.2.4. 检查表单是否有效 15.2.5. 获得错误状态 15.2.6. 放到一起 15.2.7. 使用 Zend_Config 对象 15.2.8. 结论 15.3. 使用 Zend_Form_Element 生成表单元素 15.3.1. 插件加载器 15.3.2. 过滤器 15.3.3. 校验器 15.3.4. 装饰器 15.3.5. 元数据和属性 15.3.6. 标准元素 15.3.7. Zend_Form_Element 方法 15.3.8. 配置 15.3.9. 定制元素 15.4. 使用 Zend_Form 生成表单 15.4.1. 插件加载器 15.4.2. 元素(Elements) 15.4.2.1. 组装和读取数值 15.4.2.2. 全局操作 15.4.2.3. 和元素交互使用的方法 15.4.3. 显示组(Display Groups) 15.4.3.1. 全局操作 15.4.3.2. 使用定制的显示组类 15.4.3.3. 和显示组交互使用的方法 15.4.3.4. Zend_Form_DisplayGroup 方法 15.4.4. 子表单 15.4.4.1. 全局操作 15.4.4.2. 和子表单交互使用的方法 15.4.5. 元数据(Metadata)和属性(Attributes) 15.4.6. 装饰器 15.4.7. 校验 15.4.8. 方法 15.4.9. 配置 15.4.10. 定制表单 15.5. 使用 Zend_Form_Decorator 生成定制的表单标识(Markup) 15.5.1. 操作 15.5.2. 标准装饰器 15.5.3. 定制装饰器 15.6. Zend Framework 带有的标准表单元素 15.6.1. Zend_Form_Element_Button 15.6.2. Zend_Form_Element_Checkbox 15.6.3. Zend_Form_Element_Hidden 15.6.4. Zend_Form_Element_Hash 15.6.5. Zend_Form_Element_Image 15.6.6. Zend_Form_Element_MultiCheckbox 15.6.7. Zend_Form_Element_Multiselect 15.6.8. Zend_Form_Element_Password 15.6.9. Zend_Form_Element_Radio 15.6.10. Zend_Form_Element_Reset 15.6.11. Zend_Form_Element_Select 15.6.12. Zend_Form_Element_Submit 15.6.13. Zend_Form_Element_Text 15.6.14. Zend_Form_Element_Textarea 15.7. Zend Framework 带有的标准表单装饰器(Decorators) 15.7.1. Zend_Form_Decorator_Callback 15.7.2. Zend_Form_Decorator_Description 15.7.3. Zend_Form_Decorator_DtDdWrapper 15.7.4. Zend_Form_Decorator_Errors 15.7.5. Zend_Form_Decorator_Fieldset 15.7.6. Zend_Form_Decorator_Form 15.7.7. Zend_Form_Decorator_FormElements 15.7.8. Zend_Form_Decorator_HtmlTag 15.7.9. Zend_Form_Decorator_Image 15.7.10. Zend_Form_Decorator_Label 15.7.11. Zend_Form_Decorator_ViewHelper 15.7.12. Zend_Form_Decorator_ViewScript 15.8. Zend_Form 的国际化 15.8.1. 在表单中初始化 I18n 15.8.2. 标准 I18N 目标 15.9. Zend_Form 的高级用法 15.9.1. 数组符号(Notation) 15.9.2. 多页表单 16. Zend_Gdata 16.1. Introduction to Gdata 16.1.1. Structure of Zend_Gdata 16.1.2. Interacting with Google Services 16.1.3. Obtaining instances of Zend_Gdata classes 16.1.4. Google Data Client Authentication 16.1.5. Dependencies 16.1.6. Creating a new Gdata client 16.1.7. Common query parameters 16.1.8. Fetching a feed 16.1.9. Working with multi-page feeds 16.1.10. Working with data in feeds and entries 16.1.11. Updating entries 16.1.12. Posting entries to Google servers 16.1.13. Deleting entries on Google servers 16.2. Authenticating with AuthSub 16.2.1. Creating an AuthSub authenticated Http Client 16.2.2. Revoking AuthSub authentication 16.3. Authenticating with ClientLogin 16.3.1. Creating a ClientLogin authenticated Http Client 16.3.2. Terminating a ClientLogin authenticated Http Client 16.4. Using Google Calendar 16.4.1. Connecting To The Calendar Service 16.4.1.1. Authentication 16.4.1.2. Creating A Service Instance 16.4.2. Retrieving A Calendar List 16.4.3. Retrieving Events 16.4.3.1. Queries 16.4.3.2. Retrieving Events In Order Of Start Time 16.4.3.3. Retrieving Events In A Specified Date Range 16.4.3.4. Retrieving Events By Fulltext Query 16.4.3.5. Retrieving Individual Events 16.4.4. Creating Events 16.4.4.1. Creating Single-Occurrence Events 16.4.4.2. Event Schedules and Reminders 16.4.4.3. Creating Recurring Events 16.4.4.4. Using QuickAdd 16.4.5. Modifying Events 16.4.6. Deleting Events 16.4.7. Accessing Event Comments 16.5. Using Google Documents List Data API 16.5.1. Get a List of Documents 16.5.2. Upload a Document 16.5.3. Searching the documents feed 16.5.3.1. Get a List of Word Processing Documents 16.5.3.2. Get a List of Spreadsheets 16.5.3.3. Performing a text query 16.6. Using Google Spreadsheets 16.6.1. Create a Spreadsheet 16.6.2. Get a List of Spreadsheets 16.6.3. Get a List of Worksheets 16.6.4. Interacting With List-based Feeds 16.6.4.1. Get a List-based Feed 16.6.4.2. Reverse-sort Rows 16.6.4.3. Send a Structured Query 16.6.4.4. Add a Row 16.6.4.5. Edit a Row 16.6.4.6. Delete a Row 16.6.5. Interacting With Cell-based Feeds 16.6.5.1. Get a Cell-based Feed 16.6.5.2. Send a Cell Range Query 16.6.5.3. Change Contents of a Cell 16.7. Using Google Apps Provisioning 16.7.1. Setting the current domain 16.7.1.1. Setting the domain for the service class 16.7.1.2. Setting the domain for query classes 16.7.2. Interacting with users 16.7.2.1. Creating a user account 16.7.2.2. Retrieving a user account 16.7.2.3. Retrieving all users in a domain 16.7.2.4. Updating a user account 16.7.2.4.1. Resetting a user's password 16.7.2.4.2. Forcing a user to change their password 16.7.2.4.3. Suspending a user account 16.7.2.4.4. Granting administrative rights 16.7.2.5. Deleting user accounts 16.7.3. Interacting with nicknames 16.7.3.1. Creating a nickname 16.7.3.2. Retrieving a nickname 16.7.3.3. Retrieving all nicknames for a user 16.7.3.4. Retrieving all nicknames in a domain 16.7.3.5. Deleting a nickname 16.7.4. Interacting with email lists 16.7.4.1. Creating an email list 16.7.4.2. Retrieving all email lists to which a recipient is subscribed 16.7.4.3. Retrieving all email lists in a domain 16.7.4.4. Deleting an email list 16.7.5. Interacting with email list recipients 16.7.5.1. Adding a recipient to an email list 16.7.5.2. Retrieving the list of subscribers to an email list 16.7.5.3. Removing a recipient from an email list 16.7.6. Handling errors 16.8. Using Google Base 16.8.1. Connect To The Base Service 16.8.1.1. Authentication 16.8.1.2. Create A Service Instance 16.8.2. Retrieve Items 16.8.2.1. Send a Structured Query 16.8.2.1.1. Query Customer Items Feed 16.8.2.1.2. Query Snippets Feed 16.8.2.2. Iterate through the Items 16.8.3. Insert, Update, and Delete Customer Items 16.8.3.1. Insert an Item 16.8.3.2. Modify an Item 16.8.3.3. Delete an Item 16.9. Using the YouTube data API 16.9.1. Retrieving video feeds 16.9.1.1. Searching for videos by metadata 16.9.1.2. Searching for videos by categories and tags/keywords 16.9.1.3. Retrieving standard feeds 16.9.1.4. Retrieving videos uploaded by a user 16.9.1.5. Retrieving videos favorited by a user 16.9.1.6. Retrieving video responses for a video 16.9.2. Retrieving video comments 16.9.3. Retrieving playlist feeds 16.9.3.1. Retrieving the playlists of a user 16.9.3.2. Retrieving a specific playlist 16.9.4. Retrieving a list of a user's subscriptions 16.9.5. Retrieving a user's profile 16.10. Using Picasa Web Albums 16.10.1. Connecting To The Service 16.10.1.1. Authentication 16.10.1.2. Creating A Service Instance 16.10.2. Understanding and Constructing Queries 16.10.3. Retrieving Feeds And Entries 16.10.3.1. Retrieving A User 16.10.3.2. Retrieving An Album 16.10.3.3. Retrieving A Photo 16.10.3.4. Retrieving A Comment 16.10.3.5. Retrieving A Tag 16.10.4. Creating Entries 16.10.4.1. Creating An Album 16.10.4.2. Creating A Photo 16.10.4.3. Creating A Comment 16.10.4.4. Creating A Tag 16.10.5. Deleting Entries 16.10.5.1. Deleting An Album 16.10.5.2. Deleting A Photo 16.10.5.3. Deleting A Comment 16.10.5.4. Deleting A Tag 16.10.5.5. Optimistic Concurrency (Notes On Deletion) 16.11. Catching Gdata Exceptions 17. Zend_Http 17.1. Zend_Http_Client 17.1.1. 简介 17.1.2. 带有指定的HTTP头的基本 GET 请求 17.1.3. 发送请求到多个域名 17.1.4. 改变HTTP timeout时间 17.1.5. 动态指定HTTP Header 17.1.6. 构造 HTTP POST, PUT, 和 DELETE 请求 17.2. Zend_Http_Client - Advanced Usage 17.2.1. HTTP Redirections 17.2.2. Adding Cookies and Using Cookie Persistence 17.2.3. Setting Custom Request Headers 17.2.4. File Uploads 17.2.5. Sending Raw POST Data 17.2.6. HTTP Authentication 17.2.7. Sending Multiple Requests With the Same Client 17.3. Zend_Http_Client - Connection Adapters 17.3.1. Overview 17.3.2. The Socket Adapter 17.3.3. The Proxy Adapter 17.3.4. The Test Adapter 17.3.5. Creating your own connection adapters 17.4. Zend_Http_Cookie and Zend_Http_CookieJar 17.4.1. Introduction 17.4.2. Instantiating Zend_Http_Cookie Objects 17.4.3. Zend_Http_Cookie getter methods 17.4.4. Zend_Http_Cookie: Matching against a scenario 17.4.5. The Zend_Http_CookieJar Class: Instantiation 17.4.6. Adding Cookies to a Zend_Http_CookieJar object 17.4.7. Retrieving Cookies From a Zend_Http_CookieJar object 17.5. Zend_Http_Response 17.5.1. 简介 18. Zend_Json 18.1. 简介 18.2. 基本用法 18.3. JSON 对象 18.4. XML 到 JSON 转换 19. Zend_Layout 19.1. 简介 19.2. Zend_Layout 快速入门 19.2.1. 布局脚本 19.2.2. 和Zend Framework MVC一起使用 Zend_Layout 19.2.3. 使用Zend_Layout做为独立的组件 19.2.4. 尝试一下布局 19.3. Zend_Layout 配置选项 19.3.1. 范例 19.4. Zend_Layout 高级用法 19.4.1. 定制视图对象 19.4.2. 定制前端控制器插件 19.4.3. 定制动作助手 19.4.4. 定制布局脚本路径解析(Resolution):使用变形器(Inflector) 20. Zend_Loader 20.1. 动态加载文件和类 20.1.1. 加载文件 20.1.2. 加载类 20.1.3. 判定某个文件是否可读 20.1.4. 使用 Autoloader 20.2. 加载插件 20.2.1. 基本用例 20.2.2. 处理插件路径 20.2.3. 测试插件和获取类的名字 21. Zend_Locale 21.1. Introduction 21.1.1. What is Localization 21.1.2. What is a Locale? 21.1.3. How are Locales Represented? 21.1.4. Selecting the Right Locale 21.1.5. Usage of automatic Locales 21.1.6. Using a default Locale 21.1.7. ZF Locale-Aware Classes 21.1.8. Zend_Locale_Format::setOptions(array $options) 21.1.9. Speed up Zend_Locale and it's subclasses 21.2. Using Zend_Locale 21.2.1. Copying, Cloning, and Serializing Locale Objects 21.2.2. Equality 21.2.3. Default locales 21.2.4. Set a new locale 21.2.5. Getting the language and region 21.2.6. Obtaining localized strings 21.2.7. Obtaining translations for "yes" and "no" 21.2.8. Get a list of all known locales 21.3. Normalization and Localization 21.3.1. Number normalization: getNumber($input, Array $options) 21.3.1.1. Precision and Calculations 21.3.2. Number localization 21.3.3. Number testing 21.3.4. Float value normalization 21.3.5. Floating point value localization 21.3.6. Floating point value testing 21.3.7. Integer value normalization 21.3.8. Integer point value localization 21.3.9. Integer value testing 21.3.10. Numeral System Conversion 21.3.10.1. List of supported numeral systems 21.4. Working with Dates and Times 21.4.1. Normalizing Dates and Times 21.4.2. Testing Dates 21.4.3. Normalizing a Time 21.4.4. Testing Times 21.5. Supported Languages for Locales 21.6. Supported Regions for Locales 22. Zend_Log 22.1. 概述 22.1.1. 创建Log 22.1.2. 日志消息 22.1.3. 销毁Log 22.1.4. 使用内建的消息等级 22.1.5. 添加用户定义的日志等级 22.1.6. 理解日志事件 22.2. Writers 22.2.1. 写入到流(Streams) 22.2.2. 写入到数据库 22.2.3. 踩熄Writer 22.2.4. 测试 Mock 22.2.5. 组合Writers 22.3. Formatters 22.3.1. 简单格式化 22.3.2. 格式化到XML 22.4. 过滤器 22.4.1. 对所有Writer过滤 22.4.2. 过滤一个Writer实例 23. Zend_Mail 23.1. 简介 23.1.1. 起步 23.1.2. 配置缺省的 sendmail 传送器(transport) 23.2. 通过SMTP发送邮件 23.3. 通过一个SMTP连接发送多个邮 23.4. 使用不同的Transport对象 23.5. HTML邮件 23.6. 附件 23.7. 增加收件人 23.8. 控制MIME分界线 23.9. 外加邮件头信息 23.10. 字符集 23.11. 编码 23.12. SMTP 身份验证 23.13. Securing SMTP Transport 23.14. Reading Mail Messages 23.14.1. Simple example using Pop3 23.14.2. Opening a local storage 23.14.3. Opening a remote storage 23.14.4. Fetching messages and simple methods 23.14.5. Working with messages 23.14.6. Checking for flags 23.14.7. Using folders 23.14.8. Advanced Use 23.14.8.1. Using NOOP 23.14.8.2. Caching instances 23.14.8.3. Extending Protocol Classes 23.14.8.4. Using Quota (since 1.5) 24. Zend_Measure 24.1. Introduction 24.2. Creation of Measurements 24.2.1. Creating measurements from integers and floats 24.2.2. Creating measurements from strings 24.2.3. Measurements from localized strings 24.3. Outputting measurements 24.3.1. Automatic output 24.3.2. Outputting values 24.3.3. Output with unit of measurement 24.3.4. Output as localized string 24.4. Manipulating Measurements 24.4.1. Convert 24.4.2. Add and subtract 24.4.3. Compare 24.4.4. Compare 24.4.5. Manually change values 24.4.6. Manually change types 24.5. Types of measurements 24.5.1. Hints for Zend_Measure_Binary 24.5.2. Hints for Zend_Measure_Number 24.5.3. Roman numbers 25. Zend_Memory 25.1. 概述 25.1.1. 简介 25.1.2. 操作原理 25.1.2.1. 内存管理器 25.1.2.2. 内存容器 25.1.2.3. 锁定的内存 25.1.2.4. 可移动内存 25.2. 内存管理器 25.2.1. 创建一个内存管理器 25.2.2. 管理内存对象 25.2.2.1. 创建可移动的对象 25.2.2.2. 创建锁定的对象 25.2.2.3. 销毁对象 25.2.3. 内存管理器设置 25.2.3.1. 内存限制 25.2.3.2. MinSize 25.3. 内存对象 25.3.1. 可移动的 25.3.2. 锁定的 25.3.3. 内存容器 '值' 属性. 25.3.4. 内存容器接口 25.3.4.1. getRef() 方法 25.3.4.2. touch() 方法 25.3.4.3. lock() 方法 25.3.4.4. unlock() 方法 25.3.4.5. isLocked() 方法 26. Zend_Mime 26.1. Zend_Mime 26.1.1. 简介 26.1.2. 静态方法和常量 26.1.3. 实例化Zend_Mime 26.2. Zend_Mime_Message 26.2.1. 简介 26.2.2. 实例化 26.2.3. 增加MIME消息段 26.2.4. 分界线处理 26.2.5. 解析字符串,创建Zend_Mime_Message对象(实验性的) 26.3. Zend_Mime_Part 26.3.1. 简介 26.3.2. 实例化 26.3.3. 解析(rendering)消息段为字符串的方法 27. Zend_Pdf 27.1. 简介 27.2. 生成和加载 PDF 文档 27.3. 保存修改到 PDF 文档 27.4. 文档页面 27.4.1. 页面生成 27.4.2. 页面克隆 27.5. Drawing. 27.5.1. Geometry. 27.5.2. Colors. 27.5.3. Shape Drawing. 27.5.4. Text Drawing. 27.5.5. Using fonts. 27.5.6. Starting in 1.5, Extracting fonts. 27.5.7. Image Drawing. 27.5.8. Line drawing style. 27.5.9. Fill style. 27.5.10. Rotations. 27.5.11. Save/restore graphics state. 27.5.12. Clipping draw area. 27.5.13. Styles. 27.6. Zend_Pdf module usage example. 28. Zend_Registry 28.1. 使用对象注册表(Registry) 28.1.1. 设置Registry中的值 28.1.2. 获取Registry中的值 28.1.3. 创建一个Registry对象 28.1.4. 像访问数组一样访问Registry对象 28.1.5. 对象方式访问Registry 28.1.6. 查询一个索引是否存在 28.1.7. 扩展Registry对象 28.1.8. 删除静态注册表 29. Zend_Rest 29.1. Introduction 29.2. Zend_Rest_Client 29.2.1. Introduction 29.2.2. Responses 29.2.3. Request Arguments 29.3. Zend_Rest_Server 29.3.1. Introduction 29.3.2. REST Server Usage 29.3.3. Calling a Zend_Rest_Server Service 29.3.4. Sending A Custom Status 29.3.5. Returning Custom XML Responses 30. Zend_Search_Lucene 30.1. 概述 30.1.1. 简介 30.1.2. 文档和字段对象 30.1.3. 理解字段类型 30.2. 建立索引 30.2.1. 创建新索引 30.2.2. 更新索引 30.3. 搜索索引 30.3.1. 建立查询 30.3.2. 搜索结果 30.3.3. 结果评分 30.4. Query Language 30.4.1. Terms 30.4.2. Fields 30.4.3. Starting in 1.5, Wildcards 30.4.4. Term Modifiers 30.4.5. Starting in 1.5, Range Searches 30.4.6. Starting in 1.5, Fuzzy Searches 30.4.7. Proximity Searches 30.4.8. Boosting a Term 30.4.9. Boolean Operators 30.4.9.1. AND 30.4.9.2. OR 30.4.9.3. NOT 30.4.9.4. &&, ||, and ! operators 30.4.9.5. + 30.4.9.6. - 30.4.9.7. No Operator 30.4.10. Grouping 30.4.11. Field Grouping 30.4.12. Escaping Special Characters 30.5. 查询类型 30.5.1. 单项查询 30.5.2. 多项查询 30.5.3. 短语查询 30.6. 字符集 30.6.1. UTF-8 和单字节字符集支持 30.7. 扩展性 30.7.1. 文本分析 30.7.2. 评分算法 30.7.3. 存储容器 30.8. 与 Java Lucene 的互操作性 30.8.1. 文件格式 30.8.2. 索引目录 30.8.3. Java 源代码 30.9. Advanced 30.9.1. Using the index as static property 30.10. Best Practices 30.10.1. Field names 30.10.2. Indexing performance 30.10.3. Index during Shut Down 30.10.4. Retrieving documents by unique id 30.10.5. Memory Usage 30.10.6. Encoding 30.10.7. Index maintenance 31. Zend_Server 31.1. 简介 31.2. Zend_Server_Reflection 31.2.1. 简介 31.2.2. 用法 32. Zend_Service 32.1. 简介 32.2. Zend_Service_Akismet 32.2.1. Introduction 32.2.2. Verify an API key 32.2.3. Check for spam 32.2.4. Submitting known spam 32.2.5. Submitting false positives (ham) 32.2.6. Zend-specific Accessor Methods 32.3. Zend_Service_Amazon 32.3.1. Introduction 32.3.2. Country Codes 32.3.3. Looking up a Specific Amazon Item by ASIN 32.3.4. Performing Amazon Item Searches 32.3.5. Using the Alternative Query API 32.3.5.1. Introduction 32.3.6. Zend_Service_Amazon Classes 32.3.6.1. Zend_Service_Amazon_Item 32.3.6.1.1. Zend_Service_Amazon_Item::asXML() 32.3.6.1.2. Properties 32.3.6.2. Zend_Service_Amazon_Image 32.3.6.2.1. Properties 32.3.6.3. Zend_Service_Amazon_ResultSet 32.3.6.3.1. Zend_Service_Amazon_ResultSet::totalResults() 32.3.6.4. Zend_Service_Amazon_OfferSet 32.3.6.4.1. Properties 32.3.6.5. Zend_Service_Amazon_Offer 32.3.6.5.1. Zend_Service_Amazon_Offer Properties 32.3.6.6. Zend_Service_Amazon_SimilarProduct 32.3.6.6.1. Properties 32.3.6.7. Zend_Service_Amazon_Accessories 32.3.6.7.1. Properties 32.3.6.8. Zend_Service_Amazon_CustomerReview 32.3.6.8.1. Properties 32.3.6.9. Zend_Service_Amazon_EditorialReview 32.3.6.9.1. Properties 32.3.6.10. Zend_Service_Amazon_Listmania 32.3.6.10.1. Properties 32.4. Zend_Service_Audioscrobbler 32.4.1. Introduction to Searching Audioscrobbler 32.4.2. Users 32.4.3. Artists 32.4.4. Tracks 32.4.5. Tags 32.4.6. Groups 32.4.7. Forums 32.5. Zend_Service_Delicious 32.5.1. Introduction 32.5.2. Retrieving posts 32.5.3. Zend_Service_Delicious_PostList 32.5.4. Editing posts 32.5.5. Deleting posts 32.5.6. Adding new posts 32.5.7. Tags 32.5.8. Bundles 32.5.9. Public data 32.5.9.1. Public posts 32.5.10. HTTP client 32.6. Zend_Service_Flickr 32.6.1. 对Flickr搜索的介绍 32.6.2. 查找 Flickr 用户 32.6.3. 获得 Flickr 图像详细资料 32.6.4. Zend_Service_Flickr 类 32.6.4.1. Zend_Service_Flickr_ResultSet 32.6.4.1.1. 属性 32.6.4.1.2. Zend_Service_Flickr_ResultSet::totalResults() 32.6.4.2. Zend_Service_Flickr_Result 32.6.4.2.1. 属性 32.6.4.3. Zend_Service_Flickr_Image 32.6.4.3.1. 属性 32.7. Zend_Service_Simpy 32.7.1. Introduction 32.7.2. Links 32.7.3. Tags 32.7.4. Notes 32.7.5. Watchlists 32.8. Zend_Service_StrikeIron 32.8.1. Overview 32.8.2. Registering with StrikeIron 32.8.3. Getting Started 32.8.4. Making Your First Query 32.8.5. Examining Results 32.8.6. Handling Errors 32.8.7. Checking Your Subscription 32.9. Zend_Service_StrikeIron: Bundled Services 32.9.1. ZIP Code Information 32.9.2. U.S. Address Verification 32.9.3. Sales & Use Tax Basic 32.10. Zend_Service_StrikeIron: Advanced Uses 32.10.1. Using Services by WSDL 32.10.2. Viewing SOAP Transactions 32.11. Zend_Service_Yahoo 32.11.1. 简介 32.11.2. 用Yahoo!来搜索网页 32.11.3. 用Yahoo!来查找图片 32.11.4. Finding Local Businesses and Services with Yahoo! 32.11.5. 搜索Yahoo! 新闻 32.11.6. Zend_Service_Yahoo 类 32.11.6.1. Zend_Service_Yahoo_ResultSet 32.11.6.1.1. Zend_Service_Yahoo_ResultSet::totalResults() 32.11.6.1.2. Properties 32.11.6.2. Zend_Service_Yahoo_WebResultSet 32.11.6.3. Zend_Service_Yahoo_ImageResultSet 32.11.6.4. Zend_Service_Yahoo_LocalResultSet 32.11.6.5. Zend_Service_Yahoo_NewsResultSet 32.11.6.6. Zend_Service_Yahoo_Result 32.11.6.6.1. Properties 32.11.6.7. Zend_Service_Yahoo_WebResult 32.11.6.7.1. 属性 32.11.6.8. Zend_Service_Yahoo_ImageResult 32.11.6.8.1. 属性 32.11.6.9. Zend_Service_Yahoo_LocalResult 32.11.6.9.1. 属性 32.11.6.10. Zend_Service_Yahoo_NewsResult 32.11.6.10.1. 属性 32.11.6.11. Zend_Service_Yahoo_Image 32.11.6.11.1. Properties 33. Zend_Session 33.1. 简介 33.2. 基本用法 33.2.1. 实例教程 33.2.2. 迭代会话命名空间 33.2.3. 会话命名空间的访问器 33.3. 高级用法 33.3.1. 开启会话 33.3.2. 锁住会话命名空间 33.3.3. 命名空间过期 33.3.4. 会话封装和控制器 33.3.5. 防止每个命名空间有多重实例 33.3.6. 使用数组 33.3.7. 在对象中使用会话 33.3.8. 在单元测试中使用会话 33.4. 全局会话管理 33.4.1. 配置选项 33.4.2. 错误:Headers Already Sent 33.4.3. 会话标识符 33.4.3.1. 会话劫持和会话固定 33.4.4. rememberMe(integer $seconds) 33.4.5. forgetMe() 33.4.6. sessionExists() 33.4.7. destroy(bool $remove_cookie = true, bool $readonly = true) 33.4.8. stop() 33.4.9. writeClose($readonly = true) 33.4.10. expireSessionCookie() 33.4.11. setSaveHandler(Zend_Session_SaveHandler_Interface $interface) 33.4.12. namespaceIsset($namespace) 33.4.13. namespaceUnset($namespace) 33.4.14. namespaceGet($namespace) 33.4.15. getIterator() 34. Zend_Translate 34.1. 简介 34.1.1. 开始多语言化 34.2. Zend_Translate适配器 34.2.1. 如何判断使用哪种翻译适配器 34.2.1.1. Zend_Translate_Adapter_Array 34.2.1.2. Zend_Translate_Adapter_Csv 34.2.1.3. Zend_Translate_Adapter_Gettext 34.2.1.4. Zend_Translate_Adapter_Tbx 34.2.1.5. Zend_Translate_Adapter_Tmx 34.2.1.6. Zend_Translate_Adapter_Qt 34.2.1.7. Zend_Translate_Adapter_Xliff 34.2.1.8. Zend_Translate_Adapter_XmlTm 34.2.2. 集成编写自己的适配器 34.2.3. 加速所有的适配器 34.3. Using Translation Adapters 34.3.1. Translation Source Structures 34.3.2. Creating array source files 34.3.3. Creating Gettext Source Files 34.3.4. Creating TMX Source Files 34.3.5. Creating CSV Source Files 34.3.6. Options for adapters 34.3.7. Handling languages 34.3.7.1. Automatically handling of languages 34.3.8. Automatic source detection 34.3.8.1. Language through naming directories 34.3.8.2. Language through filenames 34.3.8.2.1. Complete Filename 34.3.8.2.2. Extension of the file 34.3.8.2.3. Filename tokens 34.3.9. Checking for translations 34.3.10. Access to the source data 35. Zend_Uri 35.1. Zend_Uri 35.1.1. 概述 35.1.2. 新建一个URI 35.1.3. 操作现有的URI 35.1.4. URI 验证 35.1.5. 公共实例方法 35.1.5.1. 取得URI的Schema 35.1.5.2. 取得整个URI 35.1.5.3. 验证URI 36. Zend_Validate 36.1. 简介 36.1.1. 什么是校验器(validator)? 36.1.2. 校验器的基本用法 36.1.3. 定制消息 36.1.4. 使用静态 is() 方法 36.2. 标准校验类 36.2.1. Alnum 36.2.2. Alpha 36.2.3. Barcode 36.2.4. Between 36.2.5. Ccnum 36.2.6. 日期 36.2.7. 数字 36.2.8. Email 地址 36.2.9. 浮点数 36.2.10. GreaterThan 36.2.11. 十六进制数 36.2.12. 主机名 36.2.13. InArray 36.2.14. 整数 36.2.15. Ip 36.2.16. LessThan 36.2.17. NotEmpty 36.2.18. Regex 36.2.19. StringLength 36.3. 校验器链 36.4. 编写校验器 37. Zend_Version 37.1. 读取Zend Framework的当前版本 38. Zend_View 38.1. 简介 38.1.1. 控制器脚本 38.1.2. 视图脚本 38.1.3. 选项 38.1.4. 实用访问器 38.2. 控制器脚本 38.2.1. 变量赋值 38.2.2. 调用视图脚本并打印输出 38.2.3. 视图脚本的路径 38.3. 视图脚本 38.3.1. 转义输出(Escaping Output) 38.3.2. 使用模板系统 38.3.2.1. 使用View脚本的模板系统 38.3.2.2. 通过Zend_View_Interface接口使用模板系统 38.4. 视图助手(View Helper) 38.4.1. 基本的助手 38.4.1.1. 动作视图助手 38.4.1.2. 区域助手(Partial Helper) 38.4.1.3. 占位符助手(Placeholder Helper) 38.4.1.3.1. 具体占位符实现 38.4.1.4. 文档类型助手(Doctype Helper) 38.4.1.5. HeadLink 助手 38.4.1.6. HeadMeta 助手 38.4.1.7. HeadScript 助手 38.4.1.8. HeadStyle 助手 38.4.1.9. HeadTitle 助手 38.4.1.10. InlineScript 助手 38.4.1.11. JSON 助手 38.4.1.12. 翻译助手 38.4.2. 助手的路径 38.4.3. 编写自定义的助手类 39. Zend_XmlRpc 39.1. 介绍 39.2. Zend_XmlRpc_Client 39.2.1. 介绍 39.2.2. 带参数 39.2.2.1. 以PHP本地变量的形式传递参数 39.2.2.2. 以Zend_XmlRpc_Value 对象的形式传递参数 39.2.2.3. 将一个XML字符串解析为XML-RPC参数 39.2.3. 参数类型提示 39.2.4. 获取响应 39.3. Zend_XmlRpc_Server 39.3.1. Introduction 39.3.2. Basic Usage 39.3.3. Server Structure 39.3.4. Conventions 39.3.5. Utilizing Namespaces 39.3.6. Custom Request Objects 39.3.7. Custom Responses 39.3.8. Handling Exceptions via Faults 39.3.9. Caching Server Definitions Between Requests 39.3.10. Usage Examples 39.3.10.1. Basic Usage 39.3.10.2. Attaching a class 39.3.10.3. Attaching several classes using namespaces 39.3.10.4. Specifying exceptions to use as valid fault responses 39.3.10.5. Utilizing a custom request object 39.3.10.6. Utilizing a custom response object 39.3.10.7. Cache server definitions between requests A. 系统需求 A.1. PHP 版本需求 A.2. PHP 扩展 A.3. Zend Framework 组件 B. Zend Framework PHP 编码标准 B.1. 绪论 B.1.1. 适用范围 B.1.2. 目标 B.2. PHP File 文件格式 B.2.1. 常规 B.2.2. 缩进 B.2.3. 行的最大长度 B.2.4. 行结束标志 B.3. 命名约定 B.3.1. 类 B.3.2. 接口 B.3.3. 文件名 B.3.4. 函数和方法 B.3.5. 变量 B.3.6. 常量 B.4. 编码风格 B.4.1. PHP 代码划分(Demarcation) B.4.2. 字符串 B.4.2.1. 字符串文字 B.4.2.2. 包含单引号(')的字符串文字 B.4.2.3. 变量替换 B.4.2.4. 字符串连接 B.4.3. 数组 B.4.3.1. 数字索引数组 Numerically Indexed Arrays B.4.3.2. 关联数组 B.4.4. 类 B.4.4.1. 类的声明 B.4.4.2. 类成员变量 B.4.5. 函数和方法 B.4.5.1. 函数和方方声明 B.4.5.2. 函数和方法的用法 B.4.6. 控制语句 B.4.6.1. If / Else / Elseif B.4.6.2. Switch B.4.7. 注释文档 B.4.7.1. 格式 B.4.7.2. 文件 B.4.7.3. 类 B.4.7.4. 函数 C. 版权信息 索引 表格清单 2.1. 一个CMS范例的访问控制 3.1. 配置选项 4.1. 核心前端选项 4.2. 函数前端选项 4.3. Class frontend options 4.4. File frontend options 4.5. Page frontend options 4.6. 文件后端选项 4.7. Sqlite 后端选项 4.8. Memcached 后端选项 5.1. Zend_Config_Ini 构造器参数 8.1. 选择货币描述的常量 8.2. 选择货币位置的常量 9.1. Date Parts 9.2. Basic Operations 9.3. Date Comparison Methods 9.4. Date Output Methods 9.5. Date Output Methods 9.6. Miscellaneous Methods 9.7. Operations involving Zend_Date::HOUR 9.8. Day Constants 9.9. Week Constants 9.10. Month Constants 9.11. Year Constants 9.12. Time Constants 9.13. Timezone Constants 9.14. Date Format Constants (formats include timezone) 9.15. Date and Time Formats (format varies by locale) 9.16. Constants for ISO 8601 date output 9.17. Constants for PHP date output 9.18. Types of supported horizons for sunset and sunrise 17.1. Zend_Http_Client_Adapter_Socket configuration parameters 17.2. Zend_Http_Client configuration parameters 21.1. Details for getTranslationList($type = null, $locale = null, $value = null) 21.2. Details for getTranslation($value = null, $type = null, $locale = null) 21.3. Differences between ZF 1.0 and ZF 1.5 21.4. Format tokens for self generated number formats 21.5. List of supported numeral systems 21.6. Key values for getDate() with option 'fix_date' 21.7. Return values 21.8. Format definition 21.9. Example formats 21.10. List of all supported languages 21.11. List of all supported regions 23.1. Mail Read Feature Overview 23.2. Mail Folder Names 24.1. List of measurement types 30.1. Zend_Search_Lucene_Field 类型 32.1. Zend_Service_Amazon_Item Properties 32.2. Zend_Service_Amazon_Image Properties 32.3. Zend_Service_Amazon_OfferSet Properties 32.4. Properties 32.5. Zend_Service_Amazon_SimilarProduct Properties 32.6. Zend_Service_Amazon_Accessories Properties 32.7. Zend_Service_Amazon_CustomerReview Properties 32.8. Zend_Service_Amazon_EditorialReview Properties 32.9. Zend_Service_Amazon_Listmania Properties 32.10. Methods for retrieving public data 32.11. Methods of the Zend_Service_Delicious_SimplePost class 32.12. Zend_Service_Flickr_ResultSet 属性 32.13. Zend_Service_Flickr_Result 属性 32.14. Zend_Service_Flickr_Image 属性 32.15. Zend_Service_Yahoo_ResultSet 32.16. Zend_Service_Yahoo_LocalResultSet 属性 32.17. Zend_Service_Yahoo_Result Properties 32.18. Zend_Service_Yahoo_WebResult 属性 32.19. Zend_Service_Yahoo_ImageResult 属性 32.20. Zend_Service_Yahoo_LocalResult 属性 32.21. Zend_Service_Yahoo_NewsResult 属性 32.22. Zend_Service_Yahoo_Image Properties 34.1. Zend_Translate适配器 34.2. Options for Translation Adapters 39.1. PHP本地变量类型转化为XML-RPC类型 39.2. Zend_XmlRpc_Value 对象声明的XML-RPC类型 A.1. Zend Framework 使用的 PHP 扩展 A.2. Zend Framework 组件以及其使用到的 PHP 扩展 范例清单 2.1. 角色之间的多重继承 3.1. 修改 Session 名字空间 3.2. 使用定制存储类 3.3. 基本用法 4.1. 调用 Zend_Cache::factory()取得一个前端 4.2. Caching a database query result 4.3. 用Zend_Cache 输出前端缓存输出 5.1. 使用 Zend_Config 本身 5.2. Using Zend_Config with a PHP Configuration File 5.3. 使用 Zend_Config_Ini 5.4. 使用Zend_Config_Xml 6.1. 使用短语法 6.2. 使用长语法 6.3. 捕捉 Getopt 异常 6.4. 使用 getOption() 6.5. 使用 __get() 和 __isset() 魔术方法 6.6. 使用 getRemainingArgs() 6.7. 使用 addRules() 6.8. 使用 setHelp() 6.9. 使用 setAliases() 6.10. 使用 addArguments() 和 setArguments() 6.11. 使用 setOption() 6.12. 使用 setOptions() 7.1. 如何处理不存在的动作 7.2. 用动作、控制器和模块名来添加一个任务 7.3. 使用请求对象添加一个任务 7.4. AutoCompletion with Dojo Using Zend MVC 7.5. 允许动作响应 Ajax 的请求 7.6. 设定选项 7.7. 使用默认设定 7.8. 使用goto()的_forward()API 7.9. 通过gotoRoute()使用路由组装(route assembly) 7.10. 基本用法 7.11. 禁用自动解析 7.12. 选择另外的视图脚本 7.13. 修改注册的视图Modifying the registered view 7.14. 修改路径规则 7.15. 一个动作中解析多个视图脚本 7.16. Standard usage 7.17. Setting a different error handler 7.18. Using accessors 8.1. 从实际地方创建 Zend_Currency 的实例 8.2. 创建 Zend_Currency 实例的其它例子 8.3. 为货币创建输出 8.4. 修改货币的显示格式 8.5. 从货币中获取信息 8.6. 设置新地方 8.7. 缓存货币 9.1. Setting a default timezone 9.2. Creating the current date 9.3. get() - output a date 9.4. set() - set a date 9.5. add() - adding dates 9.6. compare() - compare dates 9.7. equals() - identify a date or date part 9.8. User-specified input date format 9.9. Operating on Parts of Dates 9.10. Date creation by instance 9.11. Static date creation 9.12. Quick creation of dates from database date values 9.13. Convenient creation of dates from database date values 9.14. Date creation by array 9.15. Example usage for self-defined ISO formats 9.16. Example usage for self-defined formats with PHP specifier 9.17. Checking dates 9.18. Getting all available cities 9.19. Getting the location for a city 9.20. Calculating sun informations 9.21. Working with timezones 9.22. Multiple timezones 10.1. Creating a SQL statement object with query() 10.2. Using a SQL statement constructor 10.3. Executing a statement with positional parameters 10.4. Executing a statement with named parameters 10.5. Using fetch() in a loop 10.6. Using fetchAll() 10.7. Setting the fetch mode 10.8. Using fetchColumn() 10.9. Using fetchObject() 10.10. Fetching a Dependent Rowset 10.11. Fetching a Dependent Rowset By a Specific Rule 10.12. Fetching a Dependent Rowset using a Zend_Db_Table_Select 10.13. Fetching Dependent Rowsets using the Magic Method 10.14. Fetching the Parent Row 10.15. Fetching a Parent Row By a Specific Rule 10.16. Fetching the Parent Row using the Magic Method 10.17. Fetching a Rowset with the Many-to-many Method 10.18. Fetching a Rowset with the Many-to-many Method By a Specific Rule 10.19. Fetching Rowsets using the Magic Many-to-many Method 10.20. Example of a Cascading Delete 10.21. Example Declaration of Cascading Operations 11.1. dump()方法使用示例 12.1. 捕捉一个异常的例子 13.1. 用Zend_Feed来处理RSS Feed数据 13.2. Atom Feed的基本用法 13.3. 读取Atom Feed的单个条目 13.4. 用条目对象直接访问Atom Feed的单个条目 13.5. 修改一个已存在的条目 13.6. 用自定义的命名空间创建一个Atom条目元素 13.7. 用自定义的命名空间继承Atom条目类 14.1. Transforming CamelCaseText to another format 14.2. Setting Multiple Rules at Once 14.3. Using Zend_Config with Zend_Filter_Inflector 15.1. 定制标签 15.2. 为所有元素设置前缀路径 15.3. 为所有元素设置装饰器(Decorators) 15.4. 为所有元素设置过滤器 15.5. 为所有的显示组设置装饰器前缀路径 15.6. 为所有显示组设置装饰器 15.7. 注册表单示例 17.1. 执行一个基本的 GET 请求 17.2. 创建一个基本的Zend_Http_Client 17.3. 发送多条header信息 17.4. 发送请求到多个域名 17.5. 用Zend_Http_Client发送POST 数据 17.6. Forcing RFC 2616 Strict Redirections on 301 and 302 Responses 17.7. Setting Cookies Using setCookie() 17.8. Enabling Cookie Stickiness 17.9. Setting A Single Custom Request Header 17.10. Setting Multiple Custom Request Headers 17.11. Using setFileUpload to Upload Files 17.12. Sending Raw POST Data 17.13. Setting HTTP Authentication User and Password 17.14. Performing consecutive requests with one client 17.15. Changing the HTTPS transport layer 17.16. Using Zend_Http_Client behind a proxy server 17.17. Testing Against a Single HTTP Response Stub 17.18. Testing Against Multiple HTTP Response Stubs 17.19. Creating your own connection adapter 17.20. Instantiating a Zend_Http_Cookie object 17.21. Stringifying a Zend_Http_Cookie object 17.22. Using getter methods with Zend_Http_Cookie 17.23. Matching cookies 17.24. 处理HTTP应答 19.1. 传递选项给构造器或startMvc() 19.2. 使用setOption() 和 setConfig() 19.3. 使用访问器 19.4. 使用Zend_Layout访问器来修改变形器(inflector) 19.5. Zend_Layout 变形器的直接修改 19.6. 定制变形器(inflectors) 20.1. loadFile() 方法范例 20.2. Example of loadClass() method 20.3. isReadable()示例: 20.4. 注册 autoloader callback 方法范例 20.5. 从继承类注册 autoload callback 方法范例 21.1. Choosing a specific locale 21.2. Automatically selecting a locale 21.3. Using automatic locales 21.4. Handling locale exceptions 21.5. Setting a default locale 21.6. Dates default to correct locale of web users 21.7. Overriding default locale selection 21.8. Performance optimization when using a default locale 21.9. Dates default to correct locale of web users 21.10. Using STANDARD definitions for setOptions() 21.11. clone 21.12. Check for equal locales 21.13. Get default locales 21.14. setLocale 21.15. getLanguage and getRegion 21.16. getTranslationList 21.17. getTranslationList 21.18. Converting country name in one language to another 21.19. All available translations 21.20. All Languages written in their native language 21.21. getQuestion() 21.22. getLocaleList() 21.23. Number normalization 21.24. Number normalization with precision 21.25. Number localization 21.26. Number localization with precision 21.27. Using a self defined number format 21.28. Number testing 21.29. Floating point value normalization 21.30. Floating point value localization 21.31. Floating point value testing 21.32. Integer value normalization 21.33. Integer value localization 21.34. Integer value testing 21.35. Converting numerals from Eastern Arabic scripts to European/Latin scripts 21.36. Converting numerals from Latin script to Eastern Arabic script 21.37. Getting 4 letter CLDR script code using a native-language name of the script 21.38. Normalizing a date 21.39. Normalizing a date by locale 21.40. Normalizing a date with time 21.41. Normalizing a userdefined date 21.42. Automatic correction of input dates 21.43. Date testing 21.44. Normalize an unknown time 21.45. Testing a time 23.1. 使用Zend_Mail发送简单邮件 23.2. 传递另外的参数给 Zend_Mail_Transport_Sendmail 传送器 23.3. 通过 SMTP 发送邮件 23.4. 通过一个SMTP连接发送多个邮件 23.5. 手工控制传送器连接 23.6. 使用不同的Transport对象 23.7. 发送HTML邮件 23.8. 带附件的邮件 23.9. 更改MIME分界线 23.10. 外加邮件头信息 23.11. 在 Zend_Mail_Transport_Smtp 中使用身份验证 23.12. Enabling a secure connection within Zend_Mail_Transport_Smtp 24.1. Converting measurements 24.2. The meter measurement 24.3. Creation using integer and floating values 24.4. Creation using strings 24.5. Arbitrary text input containing measurements 24.6. Localized string 24.7. Automatic output 24.8. Output a value 24.9. Outputting units 24.10. Convert 24.11. Adding units 24.12. Subtract 24.13. Different measurements 24.14. Identical measurements 24.15. Difference 24.16. Changing a value 24.17. Changing the type 25.1. 使用 Zend_Memory 组件 27.1. 生成新的或加载 PDF 文档 27.2. 请求 PDF 文档的指定版本 27.3. Save PDF document. 27.4. PDF 文档页面管理 27.5. Cloning existing page. 27.6. Draw a string on the page. 27.7. Draw a UTF-8-encoded string on the page. 27.8. Create a standard font. 27.9. Create a TrueType font. 27.10. Create a TrueType font, but do not embed it in the PDF document. 27.11. Do not throw an exception for fonts that cannot be embeded. 27.12. Do not compress an embedded font. 27.13. Combining font embedding options. 27.14. Extracting fonts from a loaded document. 27.15. Extracting font from a loaded document by specifying font name. 27.16. Image drawing. 27.17. Zend_Pdf module usage demo. 28.1. set() 使用示例: 28.2. get() 方法示例: 28.3. 迭代一个registry对象: 28.4. 创建一个registry对象 28.5. Example of initializing the static registry 28.6. array 方式访问示例: 28.7. 对象形式的访问: 28.8. isRegistered() 示例: 28.9. isset() 示例: 28.10. 指定静态注册表的类名: 28.11. _unsetInstance() 示例: 29.1. A basic REST request 29.2. Response Status 29.3. Using Technorati's Rest Service 29.4. Example Technorati Response 29.5. Setting Request Arguments 29.6. Basic Zend_Rest_Server Usage - Classes 29.7. Basic Zend_Rest_Server Usage - Functions 29.8. Returning Custom Status 29.9. Return Custom XML 30.1. 自定义文本分析程序 32.1. isSpam() Usage 32.2. submitSpam() Usage 32.3. submitHam() Usage 32.4. Search Amazon Using the Traditional API 32.5. Search Amazon Using the Query API 32.6. Choosing an Amazon Web Service Country 32.7. Looking up a Specific Amazon Item by ASIN 32.8. Performing Amazon Item Searches 32.9. Using the ResponseGroup Option 32.10. Search Amazon Using the Alternative Query API 32.11. Retrieving User Profile Information 32.12. Retrieving a User's Weekly Artist Chart 32.13. Retrieving Related Artists 32.14. Get all posts 32.15. Accessing post lists 32.16. Filtering a Post List with Specific Tags 32.17. Filtering a Post List by URL 32.18. Post editing 32.19. Method call chaining 32.20. Deleting posts 32.21. Adding a post 32.22. Tags 32.23. Bundles 32.24. Retrieving public data 32.25. Changing the HTTP client of Zend_Rest_Client 32.26. Configuring your HTTP client to keep connections alive 32.27. 简单的 Flickr 照片搜索 32.28. 用email地址来查找Flickr用户 32.29. 获得 Flickr 图像详细资料 32.30. Querying Links 32.31. Modifying Links 32.32. Working With Tags 32.33. Working With Notes 32.34. Retrieving Watchlists 32.35. 用Yahoo!来搜索网页 32.36. 用Yahoo!来查找图片 32.37. 用Yahoo!查找本地商务和服务信息 32.38. 搜索Yahoo! 新闻 33.1. 页面浏览计数 33.2. 新方法: 使用命名空间避免冲突 33.3. 老方法: PHP会话访问 33.4. 会话迭代 33.5. 访问会话数据 33.6. 开启全局会话 33.7. 锁住会话命名空间 33.8. 过期的例子 33.9. 带有生命期的控制器命名空间会话 33.10. 限制命名空间访问单一实例 33.11. 修改带有会话命名空间的数组数据 33.12. 在会话存储之前构造数组 33.13. 方案:重新分配一个被修改的数组 33.14. 方案:存储包括引用的数组 33.15. PHPUnit Testing Code Dependent on Zend_Session 33.16. 使用Zend_Config配置Zend_Session 33.17. 会话固定 34.1. Example of single-language PHP code 34.2. Example of multi-lingual PHP code 34.3. Example TMX file 34.4. Example CSV file 34.5. Example CSV file two 34.6. Using translation options 34.7. Handling languages with adapters 34.8. How automatically language detection works 34.9. Scanning a directory structure for sources 34.10. Directory scanning for languages 34.11. Filename scanning for languages 34.12. Checking if a text is translatable 34.13. Handling languages with adapters 35.1. 使用Zend_Uri::factory()创建一个新的URI 35.2. 使用Zend_Uri::factory()操作一个现有的URI 35.3. 使用Zend_Uri::check()进行URI 验证 35.4. 从Zend_Uri_* 对象取得模式 35.5. 从一个Zend_Uri_* 对象取得整个URI 35.6. 验证一个 Zend_Uri_* 对象 36.1. 创建简单校验类 36.2. 编写有独立条件的校验类 36.3. 带有独立条件、多重失败原因的校验 37.1. compareVersion()方法示例: 38.1. 动作视图助手的基本用法 38.2. Partials 的基本用法 38.3. 使用 PartialLoop 来解析可迭代的(Iterable)的模型 38.4. 在其它模块中解析 Partials 38.5. 占位符的基本用法 38.6. 用占位符来聚合内容 38.7. 使用占位符(Placeholders)来抓取内容 38.8. Doctype 助手的基本用法 38.9. 获取 Doctype 38.10. HeadLink 助手的基本用法 38.11. HeadMeta 助手基本用法 38.12. HeadScript 助手基本用法 38.13. Capturing Scripts Using the HeadScript Helper 38.14. HeadStyle 助手的基本用法 38.15. 用 HeadStyle 助手抓取样式声明 38.16. HeadTitle 助手基本用法 38.17. 已注册的实例 38.18. 在视图里 38.19. 直接用法 38.20. 单个参数 38.21. 参数列表 38.22. 参数数组 38.23. 动态修改地点 (locale) 38.24. 静态修改地点 (locale) 38.25. 获得当前设置的地点 39.1. 一个基本的XML-RPC请求 39.2. 用类型提示来调用一个XML-RPC服务

87,955

社区成员

发帖
与我相关
我的任务
社区描述
Web 开发 JavaScript
社区管理员
  • JavaScript
  • 无·法
加入社区
  • 近7日
  • 近30日
  • 至今
社区公告
暂无公告

试试用AI创作助手写篇文章吧