<em>Unable</em> to <em>open</em> this <em>project</em> beca<em>use</em> the <em>add-on</em> <em>software</em> that was <em>use</em>d to create it could not be foun
pb12.5<em>编译</em>生成exe的时候，弹出对话框错误，如下： <em>Unable</em> to <em>open</em> this <em>project</em> beca<em>use</em> the <em>add-on</em> <em>software</em> that was <em>use</em>d t
今天新建Maven工程，突然就不好使了。报如下错误：
<em>Unable</em> to create <em>project</em> from archetype [org.apache.maven.archetypes:maven-archetype-quickstart:1.1]
<em>Unable</em> to add module to the current <em>project</em> as it is n...
今天用<em>PB</em>9打开pbw时<em>提示</em>“Attempt to <em>open</em> datawindow failed”的错误信息，经研究发现是pb9程序指向的打印语句有问题。
原有的指向路径：
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Applications\pb90.exe\shell\<em>open</em>\command]
@="C:\Prog
<em>PB</em>打包时，报出<em>project</em>错误！ <em>Unable</em> to <em>open</em> this <em>project</em> beca<em>use</em> the <em>add-on</em> <em>software</em> that was <em>use</em>d to create i
创建工程的时候报一个错误，郁闷，什么原因呢？？软件版本是<em>Unable</em> to <em>open</em> this <em>project</em> beca<em>use</em> the <em>add-on</em> <em>software</em> that was <em>use</em>d to create it could not be found. Perhaps this <em>project</em> was built on another system? powber
当初买电脑的时候too young, too naive. 注册了一个中文的windows用户名，后面踩的坑我真是。。。这又是一个哲学问题。。。
好了，正式开始：
出现这个问题，是因为Sourch Insight软件的初始配置路径包含中文字符，出现了编码不一致的问题，所以无法正常打开软件。解决方案如下：
打开注册表编辑器
windows + r 打开运行窗口
输入:regedit, en...
我用D版pb8 在<em>编译</em>时，连续<em>编译</em>几次后；就再也<em>编译</em>不了了，连<em>project</em>工程也打不开了 请问各位大侠,知道是怎么回事吗？我明天要交活；帮帮忙吧 错误<em>提示</em> unable to <em>open</em> this p
本人在生成新PROJECT，想要<em>编译</em>工程的可执行文件时遇到一个错误<em>提示</em>，如下： <em>Unable</em> to <em>open</em> this <em>project</em> beca<em>use</em> the <em>add-on</em> <em>software</em> that
事情是这样，我用<em>PB</em>编写了个小系统，生成EXE文件后，误删掉了EXE文件，再次生成时就出现了<em>Unable</em> to <em>open</em> this <em>project</em> beca<em>use</em> the <em>add-on</em> softwar
如题，原先一直可以的，但昨天突然发现不能打开或新建工程了。错误信息为“<em>Unable</em> to <em>open</em> this <em>project</em> beca<em>use</em> the <em>add-on</em> <em>software</em> that was
我在<em>PB</em>8.0中创建一个<em>project</em>项目时，<em>提示</em> ‘<em>Unable</em> to <em>open</em> this <em>project</em> ,Beca<em>use</em> the add_on <em>software</em> that was <em>use</em>d to
我在<em>PB</em>8.0中创建一个<em>project</em>项目时，<em>提示</em> ‘<em>Unable</em> to <em>open</em> this <em>project</em> ,Beca<em>use</em> the add_on <em>software</em> that was <em>use</em>d to
I think the list shows as following:
But the correct list is :
MFC.h:
#define BOOL int
#define TRUE 1
#define FALSE 0
#define LPCSTR LPSTR
typedef char* LPSTR;
#define UINT int
#define
创建工程的时候报一个错误，郁闷，什么原因呢？？软件版本是
<em>Unable</em> to <em>open</em> this <em>project</em> beca<em>use</em> the <em>add-on</em> <em>software</em> that was <em>use</em>d to create it could not be found. Perhaps this <em>project</em> was built on another system?
powber...
