新手求教 CCS 5.5.0模拟器连接失败
环境:win7 + CCS5.5.0, 没有其他任何硬件连接,使用CCS自带的模拟仿真。
本来是用CCS6做的工程,用于DSP 28335,但是看网上文章说CCS6不带有模拟器,所以又安装了CCS5.5.0。我按照步骤将CCS5的模拟器放在CCS6里面,也有后面同样的问题,所以就以CCS5为例说明目前的问题。
CCS5里新建向导建立helloworld工程,配置工程设置,Device Family配置为C2000, Variant为2833x Delfino: TMS320F28335, 配置Connection为Texas Instruments XDS100v1 USB Emulator。再新建Test Configuration file.打开新建的测试配置文件,选择Connection设置为“Texas Instruments XDS100v1 USB Emulator, 选择Borad or Device设置为"TMS320F28335",点击Test Connection按钮,连接失败,输出如下
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
-----[Print the board config pathname(s)]------------------------------------
C:\Users\ADMINI~1\AppData\Local\.TI\693494126\
0\0\BrdDat\testBoard.dat
-----[Print the reset-command software log-file]-----------------------------
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'jioserdesusb.dll'.
An error occurred while soft opening the controller.
-----[An error has occurred and this utility has aborted]--------------------
This error is generated by TI's USCIF driver or utilities.
The value is '-600' (0xfffffda8).
The title is 'SC_ERR_LIB_ANY_LOCATE'.
The explanation is:
A required dynamic library could not be located.
The library isn't on the search path.
[End]
---------------------------------------------------------------------------
文件jioserdesusb.dll存在于C:\ti\ccsv5\ccs_base\common\uscif目录下,知道者请指教下该怎么解决这个问题,环境是否存在问题。谢谢