qt5.6移植到S3C2440编译报错，qmake.conf问题

[sanye8879cd]

使用网上教程，qtbase/mkspecs/linux-arm-gnueabi-g++/qmake.conf设置为
#
# qmake configuration for building with arm-linux-gnueabi-g++
#

MAKEFILE_GENERATOR = UNIX
CONFIG += incremental
QMAKE_INCREMENTAL_STYLE = sublib

QT_QPA_DEFAULT_PLATFORM = linuxfb
QMAKE_CFLAGS += -msoft-float -D__GCC_FLOAT_NOT_NEEDED -march=armv4t -mtune=arm920t
QMAKE_CXXFLAGS += -msoft-float -D__GCC_FLOAT_NOT_NEEDED -march=armv4t -mtune=arm920t

include(../common/linux.conf)
include(../common/gcc-base-unix.conf)
include(../common/g++-unix.conf)
#include(../common/qws.conf)

# modifications to g++.conf
QMAKE_CC = arm-none-linux-gnueabi-gcc -lts
QMAKE_CXX = arm-none-linux-gnueabi-g++ -lts
QMAKE_LINK = arm-none-linux-gnueabi-g++ -lts
QMAKE_LINK_SHLIB = arm-none-linux-gnueabi-g++ -lts

# modifications to linux.conf
QMAKE_AR = arm-none-linux-gnueabi-ar cqs
QMAKE_OBJCOPY = arm-none-linux-gnueabi-objcopy
QMAKE_NM = arm-none-linux-gnueabi-nm -P
QMAKE_STRIP = arm-none-linux-gnueabi-strip

但是会报错qt-everywhere-opensource-src-5.6.0/qtbase/mkspecs/features/qt_helper_lib.prf:27: 'qt5LibraryTarget' is not a recognized replace function


但是如果把-lts去掉的话，编译就是通过的，但是我要用到tslib的.....求大神帮助

[zarelaky]

去掉了编，tslibplugin可以在qt编译通过后，手动编译
单独配置连接器参数就可以如在LIBS=-lts -L<path_to_your_tslib>