求助volume manager!

[weixin_38052002]

我的系统有两个磁盘控制器，c0,c1，系统安装solaris8在c0t0d0上，现在安装volume manager3.4，想封装系统盘c0t0d0，但是我再我安装的时候，一切都正常，就是封装的时候提示，没有发现在控制器c0上有磁盘。我的系统盘的分区只有3个/ 、 /swap  , /export/home,并且剩余13m空间留给封装用，请问，这是什么问题，怎么解决？（VM安装：自定义，封装rootdg）报错如下： Volume Manager Installation Menu: VolumeManager/Install   The Volume Manager names disks on your system using the controller   and disk number of the disk, substituting them into the following   pattern:         c<controller>;t<disk>;d<disk>;   If the Multipathing driver is installed on the system then for the   disk devices with multiple access paths, the controller number   represents a multipath pseudo controller number. For example, if a   disk has 2 paths from controllers c0 and c1, then the Volume Manager   displays only one of them such as c0 to represent both the   controllers.   Some examples would be:         c0t0d0  - first controller, first target, first disk         c1t0d0  - second controller, first target, first disk         c1t1d0  - second controller, second target, first disk   The Volume Manager has detected the following controllers on your system:         c0:         c1: Hit RETURN to continue. Volume Manager Installation Menu: VolumeManager/Install   You will now be asked if you wish to use Quick Installation or   Custom Installation.  Custom Installation allows you to select how   the Volume Manager will handle the installation of each disk   attached to your system.   Quick Installation examines each disk attached to your system and   attempts to create volumes to cover all disk partitions that might   be used for file systems or for other similar purposes.   If you do not wish to use some disks with the Volume Manager, or if   you wish to reinitialize some disks, use the Custom Installation   option Otherwise, we suggest that you use the Quick Installation   option. Hit RETURN to continue. Volume Manager Installation Options Menu: VolumeManager/Install 1      Quick Installation 2      Custom Installation ?      Display help about menu ??     Display help about the menuing system q      Exit from menus Select an operation to perform: 2 Volume Manager Custom Installation Menu: VolumeManager/Install/Custom   The c0t0d0 disk is your Boot Disk.  You can not add it as a new   disk.  If you encapsulate it, you will make your root file system   and other system areas on the Boot Disk into volumes.  This is   required if you wish to mirror your root file system or system   swap area. Encapsulate Boot Disk [y,n,q,?] (default: n) y Enter disk name for  [<name>;,q,?] (default: rootdisk)   The c0t0d0 disk has been configured for encapsulation. Hit RETURN to continue. Volume Manager Custom Installation Menu: VolumeManager/Install/Custom/c0 Generating list of attached disks on c0.... <excluding root disk c0t0d0>; No disks were found attached to controller c0 ! Hit RETURN to continue. Volume Manager Custom Installation Menu: VolumeManager/Install/Custom/c1 Generating list of attached disks on c1....   The Volume Manager has detected the following disks on controller c1:   c1t0d0 c1t10d0 c1t16d0 c1t17d0 c1t18d0 c1t19d0 c1t1d0 c1t20d0 c1t21d0   c1t22d0 c1t23d0 c1t24d0 c1t25d0 c1t26d0 c1t2d0 c1t3d0 c1t4d0 c1t5d0   c1t6d0 c1t7d0 c1t8d0 c1t9d0 Hit RETURN to continue.