安装系统过程BUG：soft lockup - CPU#0 stuck for 23s! [kworker/0:0:4]求大神指导如何解决

dreamorpeak 2019-12-09 04:24:51
以下环境服务器:主板:超微x10drl-i 、cpu:INTEL E5-26200V4 内存：三星DDR4 16G ISO:Rendat7.0
...全文
1457 3 打赏 收藏 转发到动态 举报
写回复
用AI写文章
3 条回复
切换为时间正序
请发表友善的回复…
发表回复
wchbj9861 2020-01-02
  • 打赏
  • 举报
 回复
参考 这个尝试

https://www.supermicro.org.cn/support/faqs/faq.cfm?faq=30162
dreamorpeak 2019-12-30
  • 打赏
  • 举报
 回复
引用 1 楼 wchbj9861的回复:
AST驱动的事 开机加入 nomodeset=o
大佬，可以详细些么
wchbj9861 2019-12-23
  • 打赏
  • 举报
 回复
AST驱动的事 开机加入 nomodeset=o
虚拟网卡驱动源代码（原版）
虚拟网卡驱动源代码（原版）: /* * snull.c -- the Simple Network Utility * * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet * Copyright (C) 2001 O'Reilly & Associates * * The source code in this file can be freely used, adapted, * and redistributed in source or binary form, so long as an * acknowledgment appears in derived source files. The citation * should list that the code comes from the book "Linux Device * Drivers" by Alessandro Rubini and Jonathan Corbet, published * by O'Reilly & Associates. No warranty is attached; * we cannot take responsibility for errors or fitness for use. * * $Id: snull.c,v 1.21 2004/11/05 02:36:03 rubini Exp $ */ #include #include #include #include #include #include /* printk() */ #include /* kmalloc() */ #include /* error codes */ #include /* size_t */ #include /* mark_bh */ #include #include /* struct device, and other headers */ #include /* eth_type_trans */ #include /* struct iphdr */ #include /* struct tcphdr */ #include #include "snull.h" #include #include MODULE_AUTHOR("Alessandro Rubini, Jonathan Corbet"); MODULE_LICENSE("Dual BSD/GPL"); /* * Transmitter lockup simulation, normally disabled. */ static int lockup = 0; module_param(lockup, int, 0); static int timeout = SNULL_TIMEOUT; module_param(timeout, int, 0); /* * Do we run in NAPI mode? */ static int use_napi = 0; module_param(use_napi, int, 0); /* * A structure representing an in-flight packet. */ struct snull_packet { struct snull_packet *next; struct net_device *dev; int datalen; u8 data[ETH_DATA_LEN]; }; int pool_size = 8; module_param(pool_size, int, 0); /* * This structure is private to each device. It is used to
BURNINTEST--硬件检测工具
PassMark BurnInTest V5.3 Copyright (C) 1999-2008 PassMark Software All Rights Reserved http://www.passmark.com Overview ======== Passmark's BurnInTest is a software tool that allows all the major sub-systems of a computer to be simultaneously tested for reliability and stability. Status ====== This is a shareware program. This means that you need to buy it if you would like to continue using it after the evaluation period. Installation ============ 1) Uninstall any previous version of BurnInTest 2) Double click (or Open) the downloaded ".exe" file 3) Follow the prompts UnInstallation ============== Use the Windows control panel, Add / Remove Programs Requirements ============ - Operating System: Windows 2000, XP, 2003 server, Vista (*) - RAM: 32 Meg - Disk space: 6 Meg of free hard disk space (plus an additional 10Meg to run the Disk test) - DirectX 9.0c or above software for 3D graphics and video tests (plus working DirectX drivers for your video card) - SSE compatible CPU for SSE tests - A printer to run the printer test, set-up as the default printer in Windows. - A CD ROM + 1 Music CD or Data CD to run the CD test. - A CD-RW to run the CD burn test. - A network connection and the TCP/IP networking software installed for the Network Tests Pro version only: - A serial port loop back plug for the serial port test. - A parallel port loop back plug for the parallel port test. - A USB port loop back plug for the USB port test. - A USB 2.0 port loop back plug for the USB 2.0 port test. - PassMark ModemTest V1.3 1010 (or higher) for Plugin Modem testing. - PassMark KeyboardTest V2.2 1011 (or higher) for Plugin Keyboard testing. - PassMark Firewire Plugin V1.0 1000 (or higher) and a 揔anguru FireFlash?drive for Plugin Firewire testing. (*) Windows 2000 does not support the CD-RW burn test. The advanced RAM test is only available under Windows 2000 and Windows XP professional (the other RAM tests are supported under the other OS's). Users must have administrator privileges. Windows 98 and Windows ME ========================= Windows 98 and ME are not supported in BurnInTest version 5.3 and above. Use a version of BurnInTest prior to 5.2 for compatibility with W98 and ME. Windows 95 and Windows NT ========================= Windows 95 and NT are not supported in BurnInTest version 4.0 and above. Use a version of BurnInTest prior to 3.1 for compatibility with W95 and NT. Version History =============== Here is a summary of all changes that have been made in each version of BurnInTest. Release 5.3 build 1035 revision 4 WIN32 release 10 November 2008 - Lenovo China specific build. Lenovo system detection changes. Release 5.3 build 1035 revision 3 WIN32 release 7 November 2008 - Lenovo China specific build. Lenovo system detection changes. Release 5.3 build 1035 revision 2 WIN32 release 6 November 2008 - Lenovo China specific build. Lenovo logo and Lenovo system detection changes. Release 5.3 build 1035 WIN32 release 5 November 2008 - Lenovo China specific build. Changes include: Lenovo logo added, Lenovo system support only, 32-bit BurnInTest restricted to 32-bit Windows and BurnInTest run as administrator. Release 5.3 build 1034 WIN32 release 3 October 2008 - Correction to setting the CD burn test drive in preferences. - Changed the mechanism to check for the required DirectX Direct3D as the previous method did not work on some system (some W2003 servers). - Enhanced the mechanism to report memory hardware errors in the Memory torture test. Release 5.3 build 1033 WIN32 release 1 October 2008 - Changes to correct a BurnInTest crash problem on some systems. When the disk and standard RAM tests are run for many hours, BurnInTest may have disappeared with no error message. Release 5.3 build 1030 WIN32 release 25 September 2008 - Changes to investigate a BurnInTest crash problem on XP SP3. Release 5.3 build 1028 WIN32 release 11 September 2008 - Two 2D Video memory test crash bug workarounds implemented. Crashes in (i) DirectX DirectShow and (ii) ATI atiumdag.dll library. - A hang on startup has been corrected. A 2 minute timeout has been added to the collection of system information. - Video playback, Hard disk and CD/DVD test 'no operations' error reporting changed. - When BurnInTest crashes, it will not generate a "minidump" file. Minidumps will need to be sent to Microsoft as per the normal process. However, a log entry will be added to the normal BurnInTest log. - Changes to trace logging to reduce activity when trace logging is not turned on. - Note: We have seen a report of the Video Playback failing (crash) due to a faulty video codec, ffdshow.ax. If you are using this we suggest you try a different Video file and codec. Release 5.3 build 1027 revision 0003 WIN32 release 19 August 2008 - Changed the 2D test to wait for the Video Playback test in order to allow memory allocation for the Video playback test. - Changed the Memory test to wait for the Video Playback test and 3D test to allow memory allocation for these tests. - Minor changes to the No operation error watchdog timer for the CD and Hard disk tests. - Minor correction to the Butterfly seek test. - Video playback trace logging increased. Release 5.3 build 1027 revision 0002 WIN32 release 19 August 2008 - Video playback trace logging increased. Release 5.3 build 1027 WIN32 release 31 July 2008 - Corrected a bug where BurnInTest would fail to start if Activity trace level 2 logging (debug level logging) was turned on and the Logging Summarize option was also selected. - Minor change to the serial port test where, if "Disable RTS/CTS and DSR/DTR test phase" was selected the DTR and RTS lines would be explicitly disabled to prevent any toggling of these lines. Previously these where enabled, but not explicitly toggled. Release 5.3 build 1026 WIN32 release 17 July 2008 - Updated Level 2 and Level 3 CPU cache information for newer Intel CPU's. - Updated the detection of Hyperthreading and the number of logical CPUs for a new Intel CPU. Release 5.3 build 1025 WIN32 release 11 July 2008 - Corrected a Disk test bug where on rare occasions a verification error is incorrectly displayed. This is during the random seeking phase of the "Random data with random seeking" test mode and only occurs with some specific test settings. Release 5.3 build 1024 WIN32 release 10 July 2008 - Workaround for the rare crash bug in Vista in atklumdisp.dll at address 0x730676ae. - Added trace debug information for BurnInTest startup and the 3D test. Release 5.3 build 1022 WIN32 release 12 June 2008 - Corrected a bug where the 2D video memory test in BurnInTest v5.3.1020 and v5.3.1021 would report a "Not enough video memory available for test" error if the test was run a couple of times (without closing BurnInTest). Release 5.3 build 1021 WIN32 release 5 June 2008 - 32-bit BurnInTest PRO 5.3.1020 would not start on Windows 2000. This has been corrected. Release 5.3 build 1020 WIN32 release 29 May 2008 - BurnInTest could have crashed on accessing bad video memory hardware in the 2D test. This problem is now just reported as an error (and BurnInTest) continues. - When BurnInTest crashes, it should now generate a "minidump" file to help debug which system component caused the failure (32-bit Pro version only). - Other minor changes. Release 5.3 build 1019 WIN32 release 16 May 2008 - Corrected rare crash bugs in the 2D and Video tests. - Added a hot Key, F4, to set the auto run flag and run the tests (i.e. set "-r" and then run the tests). - Other minor changes. Release 5.3 build 1018 WIN32 release 16 April 2008 - Added an operation watchdog timer for all tests. In rare cases, a single test can stop in the operating system - i.e. there is a problem in the operating system/ device driver that prevents control being returned to the BurnInTest for that test. This was added for specialized serial port hardware that could lockup after several hours of testing. Release 5.3 build 1017 WIN32 release 3 April 2008 - Corrected the Advanced Network test to run on non-English Operating Systems. Release 5.3 build 1016 WIN32 release 17 March 2008 - Added additional USB 2.0 Loopback plug test initialization to ensure plugs are in a 'clean' state when starting the USB tests. This was added due to reported USB data verification errors after scripted USB testing across multiple reboots. Release 5.3 build 1015 WIN32 release 27 February 2008 - Increased error reporting detail for the standard RAM test, when the -v command line option is used. Release 5.3 build 1014 WIN32 release 30 January 2008 - Corrected a problem where the loopback sound test could run out of memory if run for several days. Release 5.3 build 1013 WIN32 release 31 December 2007 - Improved the reporting of COM port errors such that in the rare case a COM port locks up in the Operating System, the error is still reported. - Corrected a bug, where in rare cases, the result summary could be duplicated in a log file. - Updated license management, in an attempt to remove a rare crash on startup. Release 5.3 build 1012.0002 WIN32 release 31 October 2007 - New build of Rebooter (64-bit Windows correction). - Clarifications in the help file. Release 5.3 build 1012 WIN32 release 17 October 2007 - Changed the Standard Network Test, "Test all available NICs" such that the number of Network Addresses specified in Preferences->Network will be the number of NICs tested. This will error faulty NICs that are not detected by the BurnInTest auto NIC detection mechanism. - Minor change to the 2D memory test when run with the 3D test (multiple large windows) and the RAM test. Aimed at correcting sympton: Access Violation 0x00404CF9. - Corrections to the mapping of paths with ".\". Release 5.3 build 1011 rev 2 WIN32 release 17 September 2007 - Modified the Multi-Process torture test to better describe a new error message introduced in V5.3.1010. Release 5.3 build 1011 - Public release WIN32 release 11 September 2007 - Corrected a bug where "Limited Evaluation Version" could be displayed even after BUrnInTest is licensed (problem introduced in 32-bit BITPRO V5.3.1010). - Changed the Sound test to allow any of the tests (Wave, Midi or MP3) to be excluded from testing by blanking the filename. - The Command line parameter "-j" (cycle disk test patterns after each test file) could fail during the Random data test due to the mechanism used in BurnInTest. The Random data test is now excluded from the test when (and only when) the "-j" command line parameter is specified. - In rare circumstances, the 2D test number of operations could potentially overflow and become negative. This has been corrected. - In rare circumstances, BurnInTest could hang if there was a system problem in rebooting the system (ie. it failed to shutdown) using PassMark Rebooter. This has been corrected. Release 5.3 build 1010 - Public release WIN32 release 28 August 2007 WIN64 release 28 August 2007 - As BurnInTest exercises system components, it is possible for faulty hardware or device drivers to cause software exceptions. These are normally seen as Windows reporting an "Access Violation". Changes have been made to handle these errors for the memory tests (for faulty RAM) and direct device driver access (for some device driver errors), as well as overarching more generic handling of these types of errors. - Corrected a software failure bug on startup (particularly Vista) where a DirectX function was causing software failures in "dsetup.dll". - Updated the "Activity Event" generated with the periodic results summary report to be numbered (from 1 upwards) such that when "Logging->Summarize", these events are not summarized. - Corrected a bug where the HTML log name could include a duplicate of the filename prefix. - Updated to the Common Errors section of help. Release 5.3 build 1009 - Public release WIN32 release 16 August 2007 - Corrected a 'zip' version cleanup problem. Release 5.3 build 1008 - Komputer Swiat Expert magazine version WIN32 STD release 14 August 2007 Release 5.3 build 1007 - Public release WIN32 release 7 August 2007 - Corrected a disk test startup problem for some large RAID systems when SMART testing is selected. - Added additional logging for the disk test when an error occurs. - Changed the 3D test when run with the 2D EMC test to be 'behind' the EMC scrolling H's test. Allowed the test to be easily exited when running the 3D test in Fullscreen mode. - Minor corrections to the Advanced Network test. - Changed the log file reference of "Network Name" to "Computer Name". WIN64 specific: - MMX and 3DNow! are obsolete for native 64-bit applications. BurnInTest has been changed to show "NA" (Not applicable) in the test window for these tests. Release 5.3 build 1006 - Limited release WIN32 release 17 July 2007 - Standard Network Test changes: - Increased the number of destination IP addresses from 4 to 6. - Added an option (default) "Test all available NICs", which will force traffic down every system NIC with a basic algorithm of NIC1 to IP Address 1, NIC2 to IP Address 2 etc. - Advanced Network test changes: - Simplified the test. - Removed the UDP and FTP options. The Standard Network test can be used as a UDP test. - Removed the Advanced Network test specific logging, and included all relevant logging in the standard BurnInTest logging mechanism. - Replaced the complicated dynamic balancing of any system NIC to any Endpoint NIC with a simpler static allocation on test startup. - Changed the error detection mechanism to detect errors much more quickly. - Re-worked the errors reported. - Changed the CPU throttling mechanism to reduce the CPU load. - Updated endpoint.exe. - Removed checkend.exe (now obsolete). - Changed the logging rollover to work with the output of interim results (e.g. per 1 minute). Previously rollover only occurred on error events written to the log. This also corrected an issue where interim results summary logging could be written to the physical disk with some delay (based on Windows disk caching). - Corrected the "Unknown" reporting of some operating systems. - Added the skipping of the Butterfly seek disk test when run on Vista and insufficient privileges. A notification of this is logged. - Intel Quad core L2 cache size reporting has been added. - Added new SMART threshold descriptions. - Added new disk test options, accessed via command line parameters: /ka: keep disk test files in all cases (c.f. /k keep disk test files on error). /j: cycle patterns between test files. Note: Random seeking will be skipped in this case. This option has been added to allow multiple test patterns to be used across very large disks. - Added an option to make some test settings unavailable to the user. An example configuration file available on request. Release 5.3 build 1005 0001 (STD only) - Public release WIN32 release 29 June 2007 - Corrected a bug introduced in v5.3.1005.0000 STD (only) where the disk test would use up more and more system resources, thus causing test failures. Release 5.3 build 1005 rev 0003 (PRO only) - Limited public release WIN32 release 21 June 2007 - Correction to the behavior of a static RAM test pattern (rather than the default Cyclic pattern). Release 5.3 build 1005 rev 0002 (PRO only) - Limited public release WIN32 release 15 June 2007 - The "Select all CD/DVD drives" preferences option has been made user configurable, rather than using pre-defined test settings. Release 5.3 build 1005 rev 0001 (PRO only) - Limited public release WIN32 release 13 June 2007 - Bug correction for the CD auto selection feature. Release 5.3 build 1005 - Public release WIN32 release 18 May 2007 WIN64 release 18 May 2007 - In a number of cases, such as when specifying the post test application, uppercase application names were not accepted. This has been corrected. - The default font height in the 2D scrolling H's test should have been Arial 9. This has been changed. - The BurnInTest Video playback test incompatibility with Nero 6 and Nero 7 has been resolved. - The BurnInTest disk test throughput for dual core systems has been improved. Release 5.3 build 1004 rev2 - Limited release WIN32 release 8 May 2007 - Changed the Standard Network Test to better report packet error ratios. In addition, a new warning has been added to indicate that errors have been detected but not enough packets have been attempted to be sent to determine accurately whether the configured error ratio has been exceeded. - Corrected a bug where the "append to existing" logging option did not work across scripted reboots, and a new log file was created instead of appending to the existing log file. - If the 3D test was running, then BurnInTest blocked a forced close of BurnInTest, this blocking has been removed. - Changed the PASS and FAIL windows so they can now also be closed by selecting the Windows Close "X" button. Release 5.3 build 1004 - Public release WIN32 release 10 April 2007 WIN64 release 10 April 2007 - Corrected a problem introduced in BurnInTest v5.2 where BurnInTest could run out of memory (the main symptom) when tests where run for long periods (> 12hours). WIN64 specific: - Corrected a bug where the number of cores reported on a Quad core system was incorrectly reported as CPU packages. Release 5.3 build 1003 - Limited release WIN32 release 3 April 2007 - A new 2D GUI (Graphical User Interface) test has been added to the standard 2D graphics test. - Resolved an issue where BurnInTest would fail to start on Vista systems with DEP enabled for all programs. - On some systems, the Disk test could pause momentarily even when a duty cycle of 100% was specified. This pause has been removed. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipped as they are unavailable for testing. - Minor bug corrections. Release 5.3 build 1002 rev 0001 - Limited release WIN32 release 16 March 2007 - Changes to the new 3D test: - Added a Full screen non-windowed test for the primary monitor, where the resolution can be selected from those supported by the Graphics card. - Added the user option of changes the vertical sync in the full screen non-windowed test to be either the Maximum rate of the graphics card, or to be the rate of the monitor (this may prevent some flicker). - Added a more complex water texture using DirectX Vertex Shader 2.0 and Pixel Shader 2.0 effects (if supported by the graphics card). This applies to 3D test windows that are 800x600 or larger. - Changed some error messages from window displays (that require user intervention) to standard error reporting. Added new 3D error messages and more detail in the error reporting. - Changed the definition of an operation to be a successfully displayed frame. - Changed the definition of a cycle to be 2000 frames. - Changed 2D video memory test to wait until the 3D test starts (as per V5.2 and earlier). - A new version of rebooter has been included. - If BurnInTest is started with the -p command line parameter (to use the bit.exe directory for files such as the configuration file), then BurnInTest will start rebooter with the -p option. This can be useful when running BurnInTest and Rebooter from a USB drive. Release 5.3 build 1002 - Limited release WIN32 release 19 March 2007 - Corrected a bug introduced in V5.2 where selecting accumulated logging could lead to rebooter failing to launch. Release 5.3 build 1001 - Limited release WIN32 release 16 March 2007 - The 3D test has been improved. The 3D ball test has been replaced with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been changed to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been added for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. Release 5.3 build 1001 - Limited release WIN32 release 16 March 2007 - The 3D test has been improved. The 3D ball test has been replaced with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been changed to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been added for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. - BurnInTest uses DirectX 9.0c. This version of BurnInTest uses a more recent version of the Microsoft DirectX Direct3D component, October 2006. BurnInTest has been modified to detect and install this component (file) if it does not exist. - A command line parameter -X has been added to skip the DirectX version checking on BurnInTest start-up. - With the recent introduction of multi-monitor support for the Video Playback test, it is now more likely that the system will run out of memory when running multiple video tests simultaneously, particularly when more memory intensive codecs are used. A specific Insufficient resources to complete test message has been added in this case, rather than the previous more generic unrecoverable error message. The video test have been changed to attempt recovery from this and the more generic unrecoverable error, by closing the current video and opening the next. The logging detail has been increased. - Note: The BurnIntest sample video pack has been altered with the DivX Compressed Video file being removed due to the DivX codec failing with this Video file when used with multiple simultaneous Video playbacks. Access Violation: 0x69756e65. See: http://www.passmark.com/download/bit_download.htm - The video description is now collected for a larger range of Vista systems. - Windows 98 and ME are no longer supported. Please see www.passmark.com for a link to an older version of BurnInTest that will support W98/ME. Release 5.3 build 1000 rev2 - Limited release WIN32 release 9 March 2007 - A command line parameter -P has been added to allow the BurnInTest directory to be used rather than the User's personal directory. This may be useful when running BurnInTest from a USB drive for example. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipped as they are unavailable for testing. - A change has been made to support Hmonitor temperature monitoring on Vista. - A number of undocumented command line parameters have been documented: -B: BurnInTest will generate additional Serial port test information when activity trace level 2 logging is set. -E [data]: Specifies the test data to use in the serial port test. -M: Automatically display the Machine ID Window when BurnInTest is started. -U: Force BurnInTest to set logging on at startup. Release 5.3 build 1000 - Limited release WIN32 release 8 March 2007 - Changed the 2D and Video playback tests to support multi-monitor testing. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipped as they are unavailable for testing. Release 5.2 build 1006 - Limited release WIN32 release 1 March 2007 - Corrected a bug where BurnInTest would fail to start on certain Vista systems. - Corrected a bug where some files where the full path was not specified would be incorrectly referenced in the Program Files directory, rather than the user personal directory. Release 5.2 build 1005 - Public release WIN32 release 21 February 2007 WIN64 release 21 February 2007 - Updated the Graphics card description for Windows Vista systems. - Updated the Advanced Network test to indicate that elevated administrator privileges are required when running on Vista. - Moved files from the Program files directory for the Advanced Network Test (BurnInTest, EndPoint and CheckEnd). Specifically, the User Application directory is now used for the temporary test FTP files and the User Personal directory is now used for the log and configuration files. - Updated the cleanup process for when running the "zip" version of BurnInTest Professional from a CD or flash drive. - Updated the help link from the Windows Start, All Programs, BurnInTest menu for the browser based help. - Corrected a bug where Disk preferences displayed in the Preferences window would be incorrect when the system had no Floppy drive. - Corrected a bug where the Advanced Network test might not have been displayed until after entering the Duty Cycle selection (ie. just chaning from the standard network test to the advanced test). - Corrected a USB bug in Beta 5.2.1003 where the test would not run if there where there insufficient USB loopback plugs attached to the system. - Included a new version of PassMark Rebooter that supports Windows Vista. Release 5.2 build 1004 - Public Pre-release WIN32 release 13 February 2007 - Updated the reported Operating system for the various Vista product editions. - Disk test settings can be configured for "Automatically Select all Hard Disks", rather than using defaults. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipped as they are unavailable for testing. - Corrected a bug where temperature information could be duplicated in the HTML report. - Corrected a bug certain 'save report' warning messages could be truncated. - Help file updated. Release 5.2 build 1003 - BETA RELEASE ONLY WIN32 release 23 January 2007 - Changed the USB preferences and test to more completely check for the PassMark USB Loopback plugs and ignore any device that is not a PassMark USB Loopback plug (due to reported incorrect detection with another hardware device). - Increased Trace level debugging for Intel temperature monitoring. - Corrected a bug with the disk test introduced in 5.2.1001 Release 5.2 build 1002 - BETA RELEASE ONLY WIN32 release 22 January 2007 - Increased the number of disks that can be tested from 20 to 26. - Updated BurnInTest to reflect that Temperature monitoring with Intel Desktop utilities is supported. Intel Desktop utilities essentially is a replacement for Intel Active Monitor for newer Intel motherboards. - Increased Trace level debugging for Intel temperature monitoring. Release 5.2 build 1001 - BETA RELEASE ONLY WIN32 release 19 January 2007 - Windows Vista support. - The Block size used in the disk test is now configurable per disk. The default block size has been increased from 16KB to 32KB. - An option has been added to automatically detect all of the CD and DVD drives for the CD test (as per the disk test). This may be useful when testing across many systems with different optical drive configurations. - Increased Trace level debugging for Intel temperature monitoring. - Bugs corrected: - Disk preferences - in rare cases invalid default values could be set for a disk, an invalid value error would occur and the values would need to be manually corrected. Release 5.2 build 1000 - limited release WIN32 release 8 January 2007 - Windows Vista support. - Reduced the need for elevated administrator privileges: - Changed the location of the disk test files from the root directory of the test volume to a BurnInTest data files subdirectory (e.g from "C:\" to "C:\BurnInTest test files\") - Moved many of the files from the Program Files directory to the User directory for Windows 2000, XP and Vista. When running BurnInTest on Windows 98, ME or from a key.dat file (e.g. from a USB drive with a licensed key.dat) BurnInTest will store these files in the BurnInTest program directory. Specifically, the following files have been moved from the Program Files directory to the User Personal directory, e.g. Vista - "C:\Users\\Documents\PassMark\BurnInTest\" XP - "My Documents\PassMark\BurnInTest\" Files: Configuration file, Configuration load/save default directory, Save log file and image default directory, parallel port override "ioports.dat" directory, default command line script directory, log file directory, video file directory, Plugin directory, machine id file directory, Run as script default directory, CD burn image, Advanced network FTP temp files. - Replaced the Help system with Browser based help. - Changed the Disk test block size from 16KB to 256KB. It is planned to make this user configurable in the next build. Release 5.1 build 1014 WIN32 release 2 November 2006 WIN64 release 2 November 2006 - Corrected a bug when running on Vista, where the Standard network test would report a checksum error when the transmitted data was correct. - Corrected a bug where BurnInTest would not stop the tests based on the number of test cycles for the Plugin test or the Advanced Network test. - Made the "Could not set USB2Test mode" USB error message more specific by adding an error for insufficient system resources. - Changed the preferences Window to fit on an 800x600 resolution screen. - Corrected a minor bug in Activity level 2 trace logging with the 'hide duplicate' preference setting. - Corrected a minor memory leak if the 2D test failed to initialize (such as due to a DirectX problem). - The Parallel port test may now be used on Windows Vista. Specifically, the PassMark device driver used for the parallel port test could not be loaded on 64-bit Windows Vista as it was not digitally signed. It is now digitally signed. Release 5.1 build 1013 revision 0002 WIN32 release 19 September 2006 WIN64 release 19 September 2006 - Corrected an Access Violation problem reported by a customer on a particular MB. Release 5.1 build 1013 WIN32 release 7 September 2006 WIN64 release 7 September 2006 - The "Notes" section has been added to the Customer results certificate. - Some additional configuration range validation has been added. Release 5.1 build 1012 WIN32 release 15 August 2006 - Corrected a false report of a "Unable to get disk volume extent information" for the disk butterfly seek test. - Advanced Network test changes for errors: "Corrupt header - packet discarded" and "Advanced Network test timed out" - Advanced Network test Endpoint changes for problems on non-English Operating Systems and systems with the Windows "Network Interface" performance statistics disabled. - SMART parameters on a Samsung Hard Disk caused BurnInTest to fail when running the disk test with SMART thresholds enabled. This has been corrected. - The 2D scrolling H's test could display corrupt characters on the second and subsequent test run. This has been corrected. - A problem with the Integer maths test where the results could display a negative number of operations has been resolved. - Minor improvements to the help file. - HTML help file added for Windows Vista and Longhorn Server. - Minor improvements to the Error Classification file (error descriptions). - Some CD Trace level 1 logging has been moved to trace level 2. - Trace level 1 logging has been added to the test closing software. - New build of Endpoint.exe (1.0 1010). Release 5.1 build 1011 WIN32 release 6 July 2006 - New Advanced Network test error reporting added in the previous build V5.1 1010 has been removed. - A broader range of USB 2.0 Loopback plugs can now be used with BurnInTest. Release 5.1 build 1010 WIN32 release 4 July 2006 - Corrected the HTML report description of the L2/L3 CPU cache when the L3 cache size could not be determined. Advanced network changes: - Endpoints ran at 100% CPU load as they contained no throttling. This impacted their ability to effectively handle multiple threads handling TCP/UDP messaging. Throttling has been added to the EndPoint side to reduce CPU load. This does not greatly impact Network load. - Throttling on the BurnInTest side contained a sleep that was not insignificant. This could have impacted the BurnInTest data test thread to to handle incoming TCP and particularly UDP messages. This sleep has been reduced and other throttling parameters changed to suit. (ie. smaller sleeps more often). - EndPoint systems with x NICs (where x > 1), reported themselves as an Endpoint with x NICs, x times. Effectively registering with BurnInTest as x * x EndPoint NICS. This impacted the effectiveness of the load distribution to EndPoint NICs. An Endpoint system now only registers the once with BurnInTest. - The BurnInTest side did not report data verification Checksum errors for full duplex testing. This error determination has been corrected and reporting added. - The Test statistics sent from the Endpoint to BurnInTest could fail if the statistics block is split across 2 lower level TCP send packets. This could lead to problems like incorrect reporting of Endpoint determined checksum errors, Endpoint load and load balancing. Further it would lead to an Endpoint testthread being put into an endless TCP send loop. This would eventually bring the Endpoint system to its knees as more and more of these test threads go into this state. This has been corrected. - The Data Received reported by BurnInTest was double counted. This has been corrected. Release 5.1 build 1009 WIN32 release 23 June 2006 - Plugin test error classifications were incorrect in the log file detailed description. - Corrections to the advanced network test (BurnInTest and EndPoint). Release 5.1 build 1008 - limited release WIN32 release 20 June 2006 - Advanced network changes corrections. Most notably, a bug where part of the payload data could be lost if the payload block (eg. 1000 bytes) was split across 2 (or more) lower level TCP packets. - Added version reporting for Endpoints. Release 5.1 build 1007 - limited release WIN32 release 16 June 2006 Advanced network changes: - Corrected a BurnInTest access Violation introduced in V5.1 1006. - The Endpoint now reports its version and build to BurnInTest and BurnInTest reports this in the log file if it is an earlier version than expected. This is to help avoid the situation where old Endpoints are run on the Network, that may not be compatible with the version of BurnInTest being run by the user. - Removed a timeout report in a specific instance where a timeout is not an error. - Changed the Endpoint rebalancing and polling to occur less often after the test has been running 3 minutes. This is to help allowing the handling of polling from a larger number of multiple copies of BurnInTest on the Network. - Added a connection retries on failure for the Endpoint. - Corrected a memory leak in the Endpoint. - Increased the number of sockets supported. - Corrected some Advanced Network error classifications. Release 5.1 build 1006 - limited release WIN32 release 14 June 2006 - Improvements to the Advanced Network test (both BurnInTest V5.1 1006 and EndPoint V1.0 1004) to remove corrupted false packet corruption errors. Improved the timeout recovery mechanism. Added some validation to the Windows Network performance data used for NIC utilization. - Changes to the collection of Disk drive information on startup to try to resolve a startup issue on Systems with a large number of physical drives and 'unusual' WMI namings. Release 5.1 build 1005 WIN32 release 2 June 2006 - Corrected a bug in the Advanced network test where the test would not recover from timeout errors. The test appears to be running, but the results are 0 and the number of connected End Points are 0. Also improved the retry on timeout mechanism. - Removed some duplication in error reporting in the Advanced Network test. - Changed the Advanced Network display of Utilization to ensure a maximum of 100% displayed. - Corrected an Advanced Network test bug where the number of Errors reported in the test window would not take into account the corrupt packet threshold, and an error would be added for each occurrence of the corrupt packet (rather than when the user set threshold was reached). Release 5.1 build 1004b WIN32 release 25 May 2006 (not publicly released) - Corrected the default Advanced network corrupt packet threshold value. - Updated the data entry fields in the CD preferences when a different CD drive is selected. - The Advanced Network specific log files should be concatenated for a script run. This was only occurring for the first NIC under test. The concatenation will now occur for each NIC under test, when run from a script. - Corrected a bug where a log file name specified with no directory path could be incorrect. - Corrected a bug where the customer "Test Certificate" report incorrectly translated the "%" character from a customer specific HTML template. eg would be translated to . - The "Advanced Network test error" (215) has been removed and replaced with other existing error messages 214, 219, 220, 221 or 222. - Added the Customer name and Technician name to the text and HTMl reports. Previously, this information was only included in the "Test Certificate" report. - We have added a commandline option to specify the Serial port test data as a constant value. To specify specific data for the Serial port test you should specify e.g. "bit.exe /E 23" from the command line where 23 is in decimal and will be used for all test data (instead of random data). The vales should be between 0 and 255. Release 5.1 build 1004 WIN32 release 19 April 2006 (not publicly released) - Added the COM port speed of 921600 Kbits/s for RS 422/RS485 testing. - Changed the CD test to ensure that the entire test CD data is not cached on systems with a large amount of RAM. - Added a -M command line option to display the Machine ID window automatically when BurninTest starts. - Changed the 2D EMC scrolling H's test to work on multiple monitors were the resolution on each is different. - Changed log files such the syntax "..\" could be used for files in the directory up a level. - Minor correction to the advanced network test. Release 5.1 build 1003 WIN32 release 18 April 2006 WIN64 release 18 April 2006 - Changed the Advanced network test to allow a corrupt packet threshold value up to 1 million. - Bundled a new version of rebooter. Release 5.1 build 1002 WIN32 release 11 April 2006 WIN64 release 11 April 2006 - Corrections to the translation of V4.0 to V5 configuration files. Note: Configuration files in V5.x builds prior to V5.1 1002 could become corrupted if a V4.0 configuration file is loaded. - Corrected a bug where the main Window size and location were not restored on restarting BurnInTest. - Changes to the SMART attribute logging to support a greater range of Disk drive device drivers. Added additional Activity Level 2 trace logging. - Added an option to use CTS (Clear To Send) flow control in the loop back stage of the COM port test. - Corrected a bug where the CPU L3 cache could be reported as -1. - Help file updates. Release 5.1 build 1001 WIN32 release 30/March/2006 - Digitally signed the BurnInTest application to allow it to run under Windows Server "Longhorn". Note, previously only the installation package was digitally signed. - Updated the reported Operating system descriptions, including: - Windows Vista - Windows Server "Longhorn" - Corrected a bug where the Advanced network information was not displayed on the main window when it was run from a script. - The Advanced Network Corrupt threshold packet has been changed to produce an error every time the error is received after the threshold is reached. - Corrected the reporting of "Network, Packet discarded due to corrupt header" as a Network test error. - Corrected a bug where a new log file was not created if (only) the log prefix changed during the running of a script file. - Split the "Network, Advanced Network test error" error into 6 errors: "Network, Advanced Network test error" "Advanced Network Socket error" "Advanced Network Send error" "Advanced Network Send error - no data sent" "Advanced Network Receive error" "Advanced Network Receive error - no data received" Added either activity trace 1 or trace 2 logging for each of the errors, with additional information where available. - Added additional Serial port activity trace 2 logging. Including the logging of all transmit buffer data when the /B command line is used. Release 5.1 build 1000 WIN32 release 27/March/2006 (not a public release) Added the following features: - Create the log file directory specified in the Logging Options if it does not exist. - Condense the Advanced Network Test log files to one log file per IP address per script run, when run from a script. - Added an option to summarize duplicate errors in the log file. - Color coded errors based on severity in the Detailed event log Window and the HTML log file. - Added an option to only create a log file when BurnIn actually runs a test as opposed to every time BurnIn is executed. - Added a warning if a test thread completes with 0 cycles and 0 operations. - In the results summary html file, inserted more spacing between the 揘otes? and 揇etailed Event Log? - Changed the Activity Trace file format to be the same as the log file, ie. text or HTML, rather than always text. - The 2D 揝crolling H抯?test will now display across multiple screens/displays ?i.e. all active displays. - A threshold has been added for the 揷orrupt header ?packet discarded?event in the advanced network options so that a 揊ail?is not produced when that is the only thing that produces errors. - Added looping capability in scripting. LOOP n { ? } where n is the number of times to repeat the commands in the brackets. - Corrected a bug where PASS could be displayed if the Advanced Network test was the only test running, but it failed. Release 5.0 build 1001 WIN32 release 9/March/2006 - Corrected a bug where Network directory paths were not accepted, eg. for the log file name and post test application file name. - The CPU maths test has been improved to better load up all CPU's. Previously BurnInTest started a maths test thread per physical CPU package. BurnInTest has been changed to start a maths test thread per CPU (= num. physical CPU packages x num. CPU cores x num. logical CPUs). - The CPU preferences have been changed to allow the CPU maths test to be locked to any CPU (ie. select a CPU from a list of CPU's where the number of CPU's = num. physical CPU packages x num. CPU cores x num. logical CPUs). - The Parallel and Serial port error message have been modified in the case where a test plug may not have been connected to indicate that the user should check this. - Corrected a bug where a licenced version could display the message "[limited evaluation version]" Release 5.0 build 1000 WIN32 release 24/February/2006 WIN64 release 24/February/2006 NEW TESTS & IMPROVEMENTS TO EXISTING TESTS BurnInTest Standard and Professional versions. - Added a customer style results certificate. This will save the log file in HTML format but from the perspective of a end customer. This report style can be tailored by the user (through changing an HTML template). - An MP3 playback test has been added to the Sound test. - A color printer test has been added. - A new post test option to allow the results to be printed automatically at the end of a test has been added. - Added new Post-test action options of: - Optionally allow the user to "run an external program & exit" after BIT has been manually stopped. Modify the $RESULT variable to "PASS (manual abort)" or "FAIL (manual abort)" for this case. - Allow the results window to be displayed for all post test options (except Reboot). - Added new Pre-test actions to allow an external application to be run and have BIT wait for the application to exit. On continuing, BIT will run the subscript file (of scripting commands) if it has been created. - Changed the manual Stop buttons, to abort the running of a script (rather than just the current test). BurnInTest Professional specific. - Added a "Plugin" test that allows users to develop their own BurnInTest test modules for specialized hardware. Three external plugins may be specified at once. - A Modem test has been added to BurnInTest as a Plugin. PassMark's ModemTest Version V1.3 (latest build) is required. - A KeyBoard Test has been added to BurnInTest as a Plugin. PassMark's KeyboardTest Version V2.2 (latest build) is required. - A Firewire Test has been added to BurnInTest as a Plugin. PassMark's free Firewire plugin is required and a "Kanguru FireFlash" drive is required. - A new advanced network test has been added. BurnInTest Professional only. - The Memory test now allows the user to specify the type of test pattern to be used. - Testing with the USB 2.0 Loopback plug has been improved. When used with USB 2.0 Loopback device driver V2.0.1002, error details will now be reported for: CRC error reported by USB Host controller BIT STUFF error reported by USB Host controller DATA TOGGLE MISMATCH error reported by USB Host controller STALL PID error reported by USB Host controller DEVICE NOT RESPONDING error reported by USB Host controller PID CHECK FAILURE error reported by USB Host controller UNEXPECTED PID error reported by USB Host controller DATA OVERRUN error reported by USB Host controller DATA UNDERRUN error reported by USB Host controller BUFFER OVERRUN error reported by USB Host controller BUFFER UNDERRUN error reported by USB Host controller NOT ACCESSED error reported by USB Host controller FIFO error reported by USB Host controller TRANSACTION (XACT) ERROR reported by USB Host controller BABBLE DETECTED error reported by USB Host controller DATA BUFFER ERROR reported by USB Host controller In the case of these errors, BurnInTest will re-attempt the operation. The user can set the Error reporting to be skipped for the initial recovery attempt. IMPROVEMENTS TO TESTING FACILITIES - Added a disk autoconfig, such that when tests are started, the disk drives and settings will be defaults to all disks (exc. CD/DVD). This may be useful when testing multiple systems with different hard disk drive letters. - Store the position of the Main window on exiting BurnInTest. On starting BurnInTest, position the main window as saved; on starting tests, position the test windows as saved. - Allow a "drag & drop" of the Configuration file directly on the BurnInTest program icon. - Allow testing 99.5% to 100% of disk, instead of 94%, for disks that do not contain the Windows directory and do not contain a swap file. - Added the ability to log interim results, which may be useful for unstable systems. - AMD and Intel Dual core reporting added. - New L2 CPU cache sizes added to reports. - CPU support for SSE3, DEP and PAE added to reports. - Shortcut of "F1" for contextual help added to all Windows. - Improve the flexibility in specifying the EXECUTEWAIT scripting command for sleeper. - Updated logging header information with the hard and optical drive model. - The 2D and 3D tests have been updated to use DirectX 9.0c. - User interface updated. - The HTML report format has been improved. - The BurnInTest configuration file extension has been renamed from .cfg to use .bitcfg, to ensure the configuration file is associated with BurnInTest. - An error message indicating that accumulated log files are not supported when run from CD or DVD has been added. - To allow smaller test files with very large disks, the minimum disk test file size has been reduced from 0.1% to 0.01% of the disk space. - Log events were previously shown as "INFORMATION" if they were low level errors, or simply additional information (not errors). "INFORMATION" now refers to a low level error, and "LOG NOTE" now refers to additional information (that is not in the error count). - Improved the specific detail of the Serial Port errors detected. BurnInTest now reports framing errors, buffer overrun errors, input buffer overflow errors, parity errors and Transmit buffer full errors as specific error messages (rather than a broader error description). - Added the /k command line so the user can specify not to delete HDD test files if an error occurs. - Increased Activity trace level 1 error logging for Serial port testing. - Increased Activity trace level 1 error logging for Hyper threading detection. - Bundled a new version of the Rebooter program. - Improved the Serial port error logging (displaying baud rate) and increased Activity trace level 1 error logging (displaying erroneous data). - Modified the Window sizes to help improve navigation on smaller displays (i.e. 640x480). - The CPU load for the Standard and Torture RAM tests has been made more linear with the duty cycle setting. Note: This means that compared to the previous build of BurnInTest, less RAM test operations will be run per second (when the duty cycle is less than 100). - Additional debug code and very minor changes in the Loopback sound test. - The Post test option of "Run external application and exit" has been modified such that if no external file is specified, this Post test option will just exit BurnInTest. - Allowed the full range of PassMark USB1 loopback plugs to be used with BurnInTest Professional. - Added additional Activity Trace level 2 logging. - The delay inserted between packets in the USB2 test, when the duty cycle is less than 50, has been changed from at least 1ms to at least 1ms to 50ms (for a Duty Cycle of 49 down to 0). - The subscript commands to configure BurnInTest from an external application (i.e. specified in the bit-script-input.txt file and run by specifying either a pre-test or EXECUTEWAIT application) has been changed to allow "LOAD" commands (in addition to "SET" scripting commands). - Renamed the "Error" log to "Event" log. - Changed the order of the items in an Event log line, such that the Severity is the first item. - The EXECUTEWAIT script command has been modified such that the external application may provide an input script file (of SET... commands) to be run after the EXECUTEWAIT application closes. This allows external applications to define test environment parameters (such as the serial number and machine type). - Added scripting commands: SETSERIAL "1234-shdfgdhs-GHGHG" SETMACHINETYPE "HP XPS800" SETNOTES "Test notes defined by the external application." SETLOG "\Program Files\Plugin\plugin_log" SETPLUGIN "\Program Files\Plugin\plugin.exe" - Added POST TEST application parameter substitution to allow values to be passed to an external application at the end of a test. These are: $RESULT - "PASS" or "FAIL" will be substituted. $SERIAL - The serial number will be substituted. $MACHINETYPE - The machine type will be substituted. $NOTES - The notes will be substituted. - Added extra logging for memory allocation errors in the disk test - Added "log bad sector increase" and "bad sector threshold" options to disk test. This resulted in a change to the configuration file format and required additional code to automatically convert from old formats. - Modified the user interface in the preferences window for the disk test and the CD test - Improved the handling of USB 2.0 loopback plugs recovery from sleep states. BUG CORRECTIONS - Corrected a bug where the System and Application events logged in the BurnInTest Trace logs were wrong if the event log had reached its maximum size. - Checks that the Sound test files (WAV and MIDI) exist have been added. - The continuous auto updating of the USB image (USB Loopback plug vs. USB 2.0 Loopback plug) on the main window has been removed. This is now updated on BIT startup, selecting Refresh in USB preferences or on starting a test. If there is a serious USB problem, this (together with the USB 2.0 Loopback device driver, V2.0.1002) will avoid the possibility of BurnInTest locking up. - Corrected a bug with the Butterfly seek mode of the Disk test. This was found to occur with FAT32 disks where the Cylinder size was relatively small and the Sector size relatively large. - Reset Defaults on the Configuration Page now resets the Auto Stop Value. - Reset Defaults on the Configuration Page now resets the color indicators. - The CD test has been modified to skip invalid files either with "?"'s , to avoid reporting errors that are due to the CD test media filenames. - The Network test results window scroll bar has been corrected. - The Memory torture test could fail on some systems with a small amount of RAM and relatively high memory fragmentation. This has been corrected. - Scripting correction for .cmd files. - Corrected a bug that caused problems when running the disk test with SMART monitoring turned on. This problem only occurs on a small number of HDD's. - Corrected memory leaks - On occasion, the measured waveform from the loopback sound test may have been slightly altered on starting or stopping all tests, possibly enough to trigger an error. This has been resolved. - If an error occurred in the final second of a test, the error may have been logged but not included in the big PASS/FAIL results window. This has been corrected. - After running a script file that loaded a configuration file, that had a full path specified, the Save and Load configuration menu options no longer worked. This has been corrected. - Previously, the Version of BurnInTest was only written in the First log file after starting BurnInTest. This log line is now written in all log files. - For USB2 tests that have read or write failures, the Windows error codes are now included in the level 2 Activity trace log. - Command line parameters may now be passed to a PreTest application. - Log files may now use a single static filename. This may be useful when the log file is to be parsed by an external program. - Corrected a bug where the Plugin test would stop prematurely. - Corrected the specification of the Scripting EXECUTEWAIT filename. - Changed Script processing such that a script is aborted if a scripting error is encountered and Stop on error is selected. - Added an indication on the main window that a script is currently running ("Script currently running"). - Corrected the serial port test to identify non-existing plugs when the Disable RTS/CTS and DSR/DTR testing has been selected. - Corrected the display of strange results (666666) reported by a user, related to copy protection. - Fixed a memory leak bug in the MBM interface which caused memory allocation errors. - Added BIT version number to the ASCII log file. - Fixed a bug with the 3D Test that was causing it to stop before the autostop timer period - Changed an error in the tape drive test to a warning if tape drive doesn't support setting drive parameters. History of earlier releases: Please see http://passmark.com/products/bit_history.htm Documentation ============= All the documentation is included in the help file. It can be accessed from the help menu. There is also a PDF format Users guide available for download from the PassMark web site. Support ======= For technical support, questions, suggestions, please check the help file for our email address or visit our web page at http://www.passmark.com Ordering / Registration ======================= All the details are in the help file documentation or you can visit our sales information page http://www.passmark.com/sales Compatibility issues with the Network & Parallel Port Tests =========================================================== If you are running Windows 2000 or XP, you need to have administrator privileges to run this test. Enjoy.. The PassMark Development team
LockUp-基于Android的Cellebrite UFED自卫应用程序-Android开发
LockUp是一个Android应用程序，它将使用Cellebrite UFED LockUp等已知的取证工具来监视设备是否有将其成像的迹象。基于Android的Cellebrite UFED自卫应用程序LockUp是Android的应用程序，它将监视设备中是否存在尝试迹象。使用Cellebrite UFED等已知的取证工具对其进行成像。 这是我写的博客。 概念验证。 不代表深度防御Android API 28，不需要root依赖RECEIVE_BOOT_COMPLETED来启动服务和AccessibilityService通过ACTION_USB_DEVICE，程序包安装和已知漏洞利用程序监视USB事件
Lockup.LSP
Lockup.LSP 一个非常好的CAD加密程序，使用后程序可以查看、打印，不能被编辑、复制。 使用方法见说明。
WPTools.v6.29.1.Pro
******************************************* ************ WPTOOLS 6 History ************ ********** http://www.wpcubed.com ********* **** Copyright (C) 2012 J. Ziersch and **** **** WPCubed GmbH, Munich, Germany ******** ******************************************* * - = bug fix * + = new feature * * = changed, expanded feature ******************************************* * IMPORTANT: Please edit file WPINC.INC to * activate WPREPORTER, WPSPELL, wPDF, TBX * and GraphicEx / PNGImage support! * Delphi 2009 and later as inbuilt PNGImage ******************************************* * THE MANUAL (PDF) AND REFERENCE (HLP,CHM) * ARE PROVIDED AS SEPERATE DOWNLOADS! ******************************************* ~~~~~~~~~~ Important Notes ~~~~~~~~~~~~ - With Delphi XE2 or XE3 it is possible to compile WPTools into a 64 bit applications. You need WPTools 6 PRO or WPTools 6 Premium for this. - Localization and Inch/CM selection see http://www.wpcubed.com/manuals/wp5man/index.html?localization.htm Also see demo\tasks\localization. There are the required XML files. - if flag wpDontAddExternalFontLeading is active in property FormatOptionsEx the text will be formatted more like WPTools4/MS-Word. You can alternatively set global variable WPDoNotAddExternalFontLeading := TRUE and select the Printer WYSIWYG mode: TWPRichText1.HeaderFooter.UpdateReformatMode(true) - The FormatOption wpDisableAutosizeTables can be required for good display of tables. wpNoMinimumCellPadding for narrow layout, too. - If you plan to use DBWPRichText please check http://www.wpcubed.com/forum/viewtopic.php?p=3456 - The reader/writer receive their options through "FormatStrings" please see list at http://www.wpcubed.com/manuals/formatstrings.htm - WPTools is configured using the file WPINC.INC, here WPREPORTER is activated and the optional WPShared, WPSPell and wPDF can be selected to be compiled into main WPTools package. - also see FAQ: http://www.wpcubed.com/forum/viewforum.php?f=15 - and support forum: http://www.wpcubed.com/forum/ - WPTools 6 PRO and PREMIUM will be compiled as Version 5 if $define "WP6" is not set ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We recommend to use TMS components to create modern user interfaces, toolbars and ribbons. 19.2.2013 - WPTools 6.29.1 - fix in rtf writing code to solve problem with merged cells - fix possible rangecheck error - fix problem with TextObject.LoadFromFile and Delphi XE3 * RTF reader now handles UNC file links which use "\\" in the path * the cursor was not painted if DoubleBuffered was set to true for the parent of the editor + WPTools Premium: Saves and loads \column * improved theming of TWPToolbar and TWPToolPanel + new event: OnPaintDesktopBackground. It can be used to draw the parent of the editor, for example if it is a TMS panel or pager control. Example: procedure TForm1.WPRichText1PaintDesktopBackground(Sender: TObject; Canvas: TCanvas; R: TRect); begin // This would paint the TWPRichText, too - but TWPRichText is locked for repaint during this event AdvOfficePager1.PaintTo(Canvas, -WPRichText1.Left, -WPRichText1.Top); end; - HighlightTextColor can now also be used if 2Pass Painting is used 21.12.2012 - WPTools 6.29 - images in RTF label were not painted when label was moved + added support for XE3 to WPTools STD edition * stream RTFvariables were not loaded from WPT format. They are loaded now. 9.11.2012 - WPTools 6.28 - Update to RTF reader to load landscape flag for sections better - when page mirror was used, after a page break the text indentation was sometimes wrong - hyphenation code was broken - workaround for word files which have space characters in table definitions 16.10.2012 - WPTools 6.27'' * some additions to the PRO edition for XE3 26.9.2012 - WPTools 6.27' * The PRO Version now supports Delphi XE3 3.8.2012 - WPTools 6.27 - fix for wrong display of tables with header and footer rows. Sometimes both were painted without any data. + to load old Hiedit templates as RTF code use the formatstring -HiEditFields. This will create merge fields for ALL fields. - NL sign was not shown right after CTRL+ENTER was pressed (requires ShowNL) - fix for rangecheck exception with paintpages array - fix for footer and page mirror - doubleclick word selection now stops at NL - Workaround for Windows Spooler problems - some images would get lost - sections use footer and header of previous section, not general - ASetBorder did change all border types 12.3.2012 - WPTools 6.25.4 * allows changing of column width in redonly editors. Can be switchoed off in EditOptions or set compiler define TOTALREADONLY + wpDisableSelectAll in EditOptionsEx2 * changed reformat/repaint after Undo/Redo - pro and premium: Due to a problem with precompiler cursoir selection did not work correctly 8.3.2012 - WPTools 6.25.3' - borders for paragraphs with multiple lines were not drawn correctly - change in DBWPRich.pas to use LoadFromString instead of Text - fix possible range check error - change in WPTbar.pas to use different default for BevelOuter - change in WPIOHTML to use default charattr of paragraph is a paragraph is empty 9.2.2012 - WPTools 6.25.2 * new 2-pass painting triggers CustomPaint event only on second loop (when the text is painted) * changed protection of empty paragraph to WPTools 5 way + inside of the OnPrepareImageForSaving event it is now possible to set Writer.CurrentImageName to the name of the file which should be saved. This is only useful if ObjRef = nil and so no ObjRef.Filename can be set. + TParagraph.GetSubText now has optional parameter to disable the object reference char codes #1, #2 and #3 * HTML writer ignores #13 codes when writing the text. * additional savety code in HTML writer * HTML reader sets image width and height to contents, (if possible) * HTML reader: changes UTF8 handling for UTF8Sequence=1 * HTML reader does not stop on \0 anymore * HTML writer writes img tag also for empty images IF a name is provided in event PrepareImageforSaving * HTML reader does not add space at end anymore - the UNICODE reader uses attribute of current paragraph. This is important for consistent behaviour between ANSI and UNICODE version - when writing HTML background color is not set to white when shading is 0. 0 is treated as default value. - image align center and right now works in HTML - fix an endless loop when image was too large - improvement of table border drawing - improvement for right align in table cells + numbering will be used when wpFormatAsWebpage was set in AsWebpage 10.1.2012 - WPTools 6.25 + HTML reader reads cell heighs - RTF writer writes background color easier to understand by Word * improved XML reader/writer (unit WPIOXml1) * improved word wise cursor movement when fields are used + new "paint attributes" mode. Use WPRichText1.BrushStart to select this mode. - dashes were not painted using the current font color - some stability improvements 7.11.2011 - WPTools 6.22 + procedure TParagraph.CellSelectionAdd; + procedure CellSelectionRemove; + EditOptionsEx2: wpCellMultiSelect - allows multiselection in tables when CTRL is pressed + improved XML import/export (unit WPIOXML1.PAS) - some smaller bugs fixed 3.11.2011 - WPTools 6.21.2 - fix problem with TWPToolButton - improved HTML writer to write parameters in "" - improved display of arabic text 24.10.2011 - WPTools 6.21.1 - fix problem when painting insertpoints after tab stops. They were painted two times. - fix in XML and HTML writer. Close tags when extracting text from fields 19.10.2011 - WPTools 6.21 + CodeLocate can now also accessed in non-visual TWPRTFDataCollection and not just TWPCustomRtfEdit + CodeSelect can now also accessed in non-visual TWPRTFDataCollection and not just TWPCustomRtfEdit + TWPRTFDataCollection.CodeLocatePair( FormatName : String; var spar, epar : TParagraph; var spos, epos, : Integer ) :Integer; - solves problem with integrated Bin64 decoder + DeleteField now has optional "Contents" parameter to delete a certain field with contents + the text writer now understand the option -softlinebreaks to create a \n at the end of every line. In fact all soft line breaks will be handled like the #10 code. + CodeLoadSaveEmbeddedText - load or save text in fields, bookmarks, hyperlinks + the regular save and load methods (LoadFromFile, SaveToFile) can now access text wrapped by paired objects. specify the fieldname in the format string, i.e. "f:name=RTF" to save or load the contents of the field "name". + There is an overloaded LoadFromString which expects a WideString as parameter (Delphi 6+) - The Setup named the Delphi 2009 files "Delphi 2005" due to a typo. (Delphi 2005 units are not included anymore) - fix probable range check error in WPRTEDEFS 13.10.2011 - WPTools 6.20 + completely new setup procedure. The PRO and Premium releases don't include object files which makes them much smaller. * compiled new WPTools 6 Reference (CHM file) * Delphi XE2: several small changes to improve theming support * Delphi XE2: several small changes to provide compatibilty to 64bit compiler (requires WPTools PRO) + new demo developed with Delphi XE2, showcases actions, splitscreen, simulated MDI and property dialogs (Demos\XE2\WPWord) + wpDeleteAtEOFRemovesSpaceAfter in EditOptionsEx2 - TextObjectsGetList did not work * WPRuler uses Delphi XE2 VCL Theme plus * added defaults to properties TWPRichText - change in RTF reader to let section inherit the default layout, not the current page layout - fix of problem with table borders when also PageMirror was used. * change to DeleteMarkedChar. It now has additional parameter DeleteEmptyParAndTables : Boolean * change in unit WPWordConv to handle RTF as DOC files if they do not start with "{\rtf" * updated border dialog TWPParagraphBorderDlgEx * updated border drawing code - now supports dotted lines with wider lines. * modified method DeleteColumn * modified WPT reading code to repair table width which were negative + improved image rendering code for transparent (PNG) images. They will be drawn transparently also when scaled and also in high resolution rendering mode. + new code to draw dotted lines which also supports wider lines + new function WPReplaceTokens (unit WPUtils.PAS). It is a ReplaceTokens function to be used on a TWPRTFDataCollection, not TWPRichText - WPPremium - fix problem when there were too columns * MergeText now restores before Merge Cursor position and selection (except for cell selection) * resizing a table column does not move the cursor to the nearby cell anymore * different frame line when resizing columns and rows + InsertColumn now also works if wpAllowSplitOfCombinedCellsOnly was used in EditOptionsEx + new event OnPaintTextFrameRect let you paint background and borders for text frames, i.e. the text body or, with WPTools Premium, custom frames. + WPPREMIUM: In OnMeasureTextPage it is possible to set columns for certain pages. Using PageInfo.colflags=1 it is possible to activate a line between the columns It is also possible to add custom frames using PageInfo.rtfpage.AddFrameRect. + new ViewOptionEx: wpHideParBordersBeforAndAfterPageBreaks + improved paint routine now avoids clipping of characters which were overlapping their bounding box, such as italic letters or "f". The improvement is especially visible when selecting text or using character background colors + WPPREMIUM: it is now possible to print a line between columns using wpShowColumnCenterLine in ViewOptionsEx + With WPTools Premium it is now possible to print a line between certain colums - use par.ASet(WPAT_COLFLAGS, WPCOLUM_LINE); + paragraph styles can now contain border definion for paragraphs + TWPTextObjList now has a IndexOfSource function and a Source[] string array to access the objects * revised code to draw double borders - always draws twou lines on screen even when zoomed * improved saving of numbering attributes with styles * style dialog can now apply number level even if style does not have numbering yet. * revised wpNoEditOutsideTable - was not checked for keyboard input * fix problem with - - - - - at end of line - fix problem with spell-as-you go after hyperlinks - fix problem with page numbers in sections when tables were spanning pages - fix problem with right aligned negative numbers in merge fields * automatic text attribute was not inherited to tables inserted in fields * images with mode "under text " can now be also clicked at positiones where there is no text. - WPLngCtr now defines DONT_OVERRIDE_COM, that fixes the IDE problem with DevExpress Toolbar controls 18.7.2011 - WPTools 6.16.2 * ObjectMode wpobjPositionAtCenter can be used to aligh character based images to the center line. (Other RTF reader will not understand this feature) * some changes to prepare 64bit compatibility (requires WPTools 6 PRO) 7.7.2011 - WPTools 6.16.1 * change to avoid flickering when doing auto scroll * message strings are now loaded from resource strings - modified DBCS support for RTF reader * outerborder action now works for sinle cells and paragraphs 15.6.2011 - WPTools 6.16 + Many improvements to new Border Dialog. It is now possible to apply borders and colors to odd and even rows only. * RTF reader defines symbol IGNORE_AUTOWIDTH_TBL. This disable the Word2010 auto width columns which are not read correctly. Reason: Word 2010 seem to always add an empty column to the end. + using WPRichText1.Caret.Blink:=true it is possible to activate the blinking caret (0.5sec interval). * updated actions to apply inner and outer borders to selected cells * update to ExSymbolDialog, Tab and Table dialog - improved WPTOOLS reader to read and apply outline properties to current outline setting (unless wpLoadDoesNotOverride is used) - wpsec_ResetPageNumber flag is now saved in WPTOOLS format * tripple click in margin selects paragraph + double click in margin selects current cell + tripple click in margin selects current row - change for PaintEngine and TWPRichTextLabel to not shrink tables which are small enough to fit the page This solves a problem with dissapearing text in WPRichTextLabel - fix selection problem when several images were linked to same paragraph - when moving images the Z order will not be reset - HTML Writer: A style with name "DIV" will be added to the style sheet to save the default font - HTML Writer: BaseFont tag will now be written with font size (requires -writebasefont option) - improved display of character background color for fields and other special code - Saving a style sheet did not work with Unicode Compiler 8.5.2011 - WPTools 6.15 * updated border painting * updated Inner/Outer Border Action * new object sizing routine lets the user make the size larger than the page - update in WPTools reader to overwrite outline styles when loading tzhe same group 9.3.2011 - WPTools 6.14.6 * change in format routine to fix problem when a nested table cell caused a page break. 14.12.2010 - WPTools 6.14 * fix for SetAsString code (Unicode Delphi) * several fixes and updates in editor * WPTools Premium: $define DONT_AUTOENTER_TEXTBOXES in WPINC.INC to switch of the behavior, that when editing a textbox the user can click on any other and edit that. 22.9.2010 - WPTools 6.13.3 * WPCtrMemo.PAS now defines TEXT_IS_UNICODE fro Delphi 2009 and later. Now the property Text and SelText reads and writes unicode strigs * change in RTF reader to read ANSI characters in the range 128..255 * Tables and rows can now be hidden. (TParagraph.Hidden) * The Lines property now supports unicode strings (Delphi 2009 and later) + HTML reader and writer now use the entitly ­ as soft hyphen 27.8.2010 - WPTools 6.13.2a + new ViewOptionEx wpUnderlineWebLinks. If active links like http://www.wptools.de will be drawn using the attributes for hyperlinks The HyperlinkCursor will be selected and the hyperlink event will be triggered * other fixes in RTF engine - Memo._OverrideCharset was not set to -1 27.7.2010 - WPTools 6.13.1 + WPRichText1.Memo.ColorGridLines can be used to change the color of the grid lines (ViewOptions) 23.7.2010 - WPTools 6.13 * several improvements of editor * improvement to RTF writer to when writing table cells * improved right aligned text * fixed problem with line heights of lines which are empty except for new line character 22.6.2010 - WPTools 6.12.1b - fix for problem when pressing Accent + Backspace - fix for WPReporter to assign default attribute to destination - fix for WPReporter to move images when converting templates 18.6.2010 - WPTools 6.12.1a * the new border dialog now reads the current border attributes from table cells, tables or selections - Premium: fix problem when loading columns which started on first line - fix in wpfUseKerning mode (FormatOptionsEx2) - it did not work as expected with some texts (We recommend to use wpfUseKerning - it produces better print quality on screen) * Pasting of HTML now works better - fix for right tabs when also borders were used 13.6.2010 - WPTools 6.12 + all new, powerful yet intuitive Border dialog. The border dialog can modify a range of selected cells, columns, rows, tables and also only modify certain properties while leaving the others unchanged. You need to activate the compiler symbol NEWBORDER to use it by default + new method: procedure SetBorderProperties(Inner, Outer: TWPTextStyle; ApplyMode : TWPParagraphBordApply; Mode : TWPUpdateBorderProperties = [wpSetBorderFlags, wpSetBorderType, wpSetBorderWidth, wpSetBorderColor, wpSetParColor, wpSetParShading]); This method is mainly used by the new border dialog. + new flags in ViewOptionsEx: wpShowCurrentCellAsSelected, // Displays current cell to be selected. Disables current selection wpShowCurrentRowAsSelected, // Displays current table row to be selected. Disables current selection wpShowCurrentTableAsSelected // Displays current table to be selected. Disables current selection + new property YOffsetNormal to defined an upper border for normal and wordwrap view. * feature Header.MarginMirror changed to work like MS Word new flag: wpMarginMirrorBookPrint in FormatOptionsEx2 to enable the previous logic * workaround for MouseWheel UP beeing triggered too often (10 mms check) + ClipboardOption wpcoDontPasteHTML to disable HTML pasting completely (avoid problems with firefox) + it is now possible to load base64 embedded JPEGs from HTML * it is now possible to change width of tables which exceed right margin - fix bug in HTML writer for lists in table cells - fix in RTF writer to write character colors also for text which is using a character style - fix: numbering was not always updated - fix: better use fonts in certain RTF files written by MS Word + Update to WPLanguageControl to make Localization easier to use. Only< this code is not required: procedure TForm1.WPLanguageControl1Loaded(Sender: TObject); begin WPLangInterface := TWPLocalizationInterface.Create(WPLanguageControl1); WPLocalizeAllStrings; end; 6.5.2010 - WPTools 6.11.2 * improvement to border rendering * improvement to XML unit WPIOXML1 (Premium) 5.5.2010 - WPTools 6.11.1 + ConvertTableToText now supports option to also handle soft line breaks - fix problems with underlines at end of line - fix problem when loading hyperlinks in RTF - fix problem when saving attributes to XML (WPTools Premium) - fix problem with text rendering - fix problem with tables which habe header row and pages with different header margin 19.4.2010 - WPTools 6.11 + EditOptionEx: wpRowMultiSelect + new event: OnInternPaintPar + new event: RTFDataCollection AfterApplyUndoObject 14.4.2010 - WPTools 6.10.6 * fields are now passed as unicode strings to PDF exporter * Delphi 2010/2009 import has been improved to load unicode values which are stroed in fields. 5.4.2010 - WPTools 6.10.5 + flag: wpDontExtendSelectionToRightMargin. Do not extend selection to end of line + wpInvertActiveRow in ViewOptionsEx - some fixes for Delphi 2009 and Delphi 2010 - fix for section support - WPTools premium: Fix for images in text boxes - workwaround to load RTF which use emfblib for pngblib 28.2.2010 - WPTools 6.10 - improve word left/right movement to skip hidden text - improve http load of images - improve support for numbering - improve saving of character style attributes 11.2.2010 - WPTools 6.09.1 + LoadFromString now has a "WithClear" parameter - fix in RTF reader to better load files which do not define codepage - fix in paint routine to solve a rare lockup - fix in format routine to improve section support 6.2.2010 - WPTools 6.09.1 - fix of problem in save routine when footnotes were used (WPTools premium) - fix in HTML writer - Image optiions now have a Rotation property which allows 90, 180 and 270 setting. - HTML reader and writer now support different colors for left,right,top, bottom lines 1.2.2010 - WPTools 6.09 - HTML writer will write 8 hard spaces for TAB stops at the start of a paragraph - HTML writer will write page information only if -PageInfo was used in format string - fix problem with left aligned text and image wrap around (wrong alignment) - fix problem with sometimes duplicated images in PDF export - fix problem with black rectangle in first line under Windows 7, 64 bit - Improvment to RTF reader to ignore section properties which are not followed by \sect 14.12.2009 - WPTools 6.08 - graphics are resized to fill text area - fixed problems in numbering - fixed problem with one word paragraphs in justified paragraphs - other improvements in editor 27.10.2009 - WPTools 6.07 - fixed one leaking TList per TWPRichText * improved layout of most important dialogs * improved extended insert symbol dialog - fix in RTF reader to load sections and header+footer written by Word 2003 - don't add unwanted cell padding when loading table cells - fix in WPTools reader to read custom number styles - if paragraph styles use number styles the indent defined in the style has priority over numberstyle - LabelDef now also works for one row and one column - better handling of mousewheel event - fix for tabs in tables + GIF animation (requires GifImage) library (not threaded) to use it You need to set ViewOption wpUseOwnDoubleBuffer and call the method RefreshAniImages using a timer object. - fix problem when sections were used with LabeDef.Active = true * change in HTML writer to close tags before paragraph end 4.10.2009 - WPTools 6.06 - fix problem with Delphi 2010 support (language control) - fix problem with PDF export to reduce PDF size - improve support for IME * improve AsWebPage format mode. Now WordWrap propery is supported. - fix searching text upwards with "Whole Word" selected + RTF writer now can use format option "-writehighlight" to writh \highlight instead of \cb 14.9.2009 - WPTools 6.05.9 + added Delphi 2010 Support - problem when pasting from "The Bat" - fix problem in Delphi 2009 (Assign Method) 3.8.2009 - WPTools 6.05.8' * when using "Delete All" in the tabstop dialog, all tabs will be cleared added to manual: Tabstop Category - fixed problem when deleting text in a paragraph. The alignment was cleared unexpectedly. - fix problem with installer, WPMangeHeaderFooter.DFM was not included - fix for IPara in mail merge field objects - improved handling of hoover effect for hyperlinks - improved text rendering for wPDF output (CID Mode) - add correct WPManHeadFoot.dfm 23.7.2009 - WPTools 6.05.7 + WRITE_PROP_WPTOOLSOBJ $define in WPIOWriteRTF. Avoid problems when saving RTF and opting in Word In case of special objects, such as SPAN codes, \*\wpfldinst is beeing written what is ignored by WOrd + Dialog HeaderFooter can optionally create and manage header&footer for the current section + new KeepN Handling. This is by default activated in FormatOptionsEx2 + new wpfHideParagraphWithHiddenText in FormatOptionsEx2. Now paragraphs will be hidden if empty or only contain hidden text. + new format option -zap1 will remove the every first byte to convert a two byte stream into singly byte -zap2 will remove every second byte. Usie this option when loading data from unicode data sets - bugfix for table loading in RTF 15.7.2009 - WPTools 6.05 + TParagraph.Trim method to remove white spaces at start and end + Vertical Scrolling by pressing the middle mouse button now works. + improved auto thumbnail mode * enhancement to HTML reader / writer to handle embedded SPAN objects + new method: ApplySPANStyles(and_remove : Boolean=false; ignore_charattr : Boolean = false); can be used to apply SPAN styles to the text which it embeds + The function InputSpanObjects( Attributes : TWPAbstractCharAttrInterface ) : TWPTextObj; can be used to wrap the selected text into SPAN objects + method LoadCSSheet can be used to load paragraph styles in CSS format from a string - fix problem with Wordrwap and centered text + new even OnTextObjectMovePosition (move event) - OnTextObjectMove is still used for resize (unchanged) 28.6.2009 - WPTools 6.04 + WPTools Premium: Column Balancing * many improvements in RTF reader. Word documents are now understood better * Improvement in check for protected text (ppMergedText) + new ViewOptionsEx property - auto hyperlinks were not working + TWPComboBox has an event OnUpdateItems which will be triggered after the items had been automatically assigned. 24.6.2009 - WPTools 6.03.6 * thinner page borders in thumbnail mode. ViewOptionsEx: wpAutoThumbnailMode will show pagenumbers only when in thubmbnail mode (= wpShowPageNRinGap in ViewOptions) + property ColorDesktop and DeskGradientHorizontal to render the background with a gradient fill * fix for protected text handling (CR after a field) * fix for text alignment near a movable image - EditOption AutoDetectHyperlinks was not working anymore * WPReporter: SuperMerge.Stack.PageBreakAFterGroup := true was ot working when footers were used 1.6.2009 - WPTools 6.03.5 - fix problem with display of character attributes when attributes were inherited from paragraph styles - fix problems with selection deletion in single column, single row tables - improvement of RTF writer when writing sections 11.5.2009 - WPTools 6.03.3 - improved report band dialog, new ShowOptions property - fix in RTF reader to load header/footer - change in HTML writer to save SPAN instead of FONT tag - several fixes in editor * WPTools Premium: better column support. Fixed column height now splits correctly on 2 pages. 28.4.2009 - WPTools 6.03.2 - fix problem with justified text in PDF 21.4.2009 - WPTools 6.03.1 - fix problem with images when used in Delphi 2009 - better support for header/footer in RTF files created by word. (Ignore bogus header/footer) - soome stability fixes 25.3.2009 - WPTools 6.03 + improved text rendering - optimation for character distances on screen to provide better display + improvement on ShowMergeFieldNames to improve cursor movement and drag and drop + automatic disable dragging of fields inside of fields + improved merge field selection. TextObject.SelectedObject now returns the mergefield if it was completely selected + change in HTML saving code to save src in after width adn height (for outlook) * various bugfixes 17.1.2009 - WPTools 6.02 - WPPREMIUM: Text after Columns initialized with WPAT_COLUMNS_Y is now allowed + TWPToolBar FontName drop down now lists fonts used by document first - fix for tables which use a fixed row height and are splitted on different pages + improvements necessary for Delphi 2009 - the Locaization demo now works + EditOptionEx wpDontPreserveObjectsAgainstDeletion - fix problem in ImageObject LoadFromStream when GraphicEx is used - fix problem with Delphi 2009 when loading WPReporter templates - fix problem with HTML reader with paragraph style of first paragraph + GetFontUnicodeRanges dynamically linked to avoid Win98 problem 26.10.2008 - WPTools 6.01 * updated HTTP Demo, now with "Source View" + DELETE/BACKSPC at start of line removes right/center alignment + loads background images for paragraphs, tables and styles * improvement to text protection (empty lines) - improvements to HTML and CSS reader - improved HTML format routine - improved MIME loading - now supports binary data despite Synapse does not) + MIME reader capturesHTML body for SourceVIew * DataProvider now uses MergeText('',true) instead of MergeText + boolean wphttp_Disable to disconnect HTTP temporarily * several changes to improve compatibility with Delphi 2009 17.10.2008 - WPTools 6.00.1 - several changes to fix problems which occured with use of Delphi 2009 * update to WPIO_MIME to also load binary encoded GIFS and JPEGS from EML files 16.10.2008 - WPTools 6.00 * new installer + VCL demo * fixed problem with TWPComboBox and default attributes * updated "Tasks\Mini" demo project - fix in default actions 3.10.2008 - WPTools 6 Beta c - remove not required unit reference form WPRTEReport * update to manual 2.10.2008 - WPTools 6 Beta b - fix in Installation script 30.9.2008 - WPTools 6 Beta a 1) Application-Server-Mode WPTools 6 introduces a feature which is called "Application-Server-Mode". This is only available when you have the PREMIUM version. This mode is activated when true is assigned to the global boolean variable WPAppServerMode. When this mode is activated the editor does not use the double buffered output anymore. While this can cause some flickering the network traffic is reduced when the application runs on an application server, such as Citrix. Please note, effective with WPTools 6, software which was written for application servers (such as clinic software) may only be distributed when a TEAM or SITE license of WPTools was acquired.END 2) Integrated Label Printing When activated the integrated label printing shows multiple labels on one virtual sheet of paper. The cursor can move from label to label freely. The user can so edit the labels, add new or delete unwanted labels before the complete sheet is printed. This is a very unique and versatile feature. 3) Additions to the PDF export with wPDF V3 Create embedded data objects Create edit / memo fields Create a check box field Also the creation of PDF tags was enhanced. So now hints to paragraph styles will be also exported. 4) Additional Control over Clipboard Actions a) properties to select the format b) added security 5) Added Section API + WPRichText1.ActiveSection + WPRichText1.InputSection + TWPPagePropDlg has new method ExecuteEx. Use it to change current page size or Section WPPagePropDlg1.ExecuteEx(WPRichText1.ActiveSection); 6) Load over HTTP connections (requires Synapse) 7) Load and save MIME encoded HTML with embedded images (requires Synapse) 8) Integrated XML syntax highlighting (non destructive) 9) WPReporter: Token to Template conversion with syntax highlighting 10) Additions to paragraph API 11) Special mode to format HTML documents
CPU和硬件区

1,025

社区成员

562

社区内容

发帖
与我相关
我的任务
社区描述
Linux /Unix kernel支持不同的硬件体系，X86, ARM, MIPS, 等等
社区管理员
  • CPU和硬件区社区
加入社区
  • 近7日
  • 近30日
  • 至今

加载中

查看更多榜单
社区公告
暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章