790
社区成员
发帖
与我相关
我的任务
分享请发表友善的回复…
发表回复
tommyhuanglei 2003-12-31
- 打赏
- 举报
晕
chrislois 2003-12-11
- 打赏
- 举报
up
moming123 2003-09-04
- 打赏
- 举报
这下子绝对详细了：）
moming123 2003-09-04
- 打赏
- 举报
TC3X_ATC_01_V03.10 Page 128 of 192 11.01.2002
<mode> 0 Buffer unsolicited result codes in the TA. If TA result code
buffer is full, indications can be buffered in some other place or
the oldest indications may be discarded and replaced with the
new received indications.
1 Discard indication and reject new received message
unsolicited result codes when TA-TE link is reserved (e.g. in
on-line data mode). Otherwise forward them directly to the TE.
2 Buffer unsolicited result codes in the TA when TA-TE link is reserved
(e.g. in on-line data mode) and flush them to the TE
after reservation. Otherwise forward them directly to the TE.
3 Forward unsolicited result codes directly to the TE. TA-TE link
specific inband technique used to embed result codes and data
when TA is in on-line data mode.
<mt> Rules for storing received SMS depend on the relevant data coding
method (refer to GSM 03.38 [2]), preferred memory storage (+CPMS)
setting and this value
Note: If AT command interface is acting as the only display device, the
ME must support storage of class 0 messages and messages in the
message waiting indication group (discard message)
0 No SMS-DELIVER indications are routed to the TE.
1 If SMS-DELIVER is stored in ME/TA, indication of the memory
location is routed to the TE using unsolicited result code:
+CMTI: <mem>,<index>
AT Command Set
2 SMS-DELIVERs, except class 2 messages and messages in
the message waiting indication group (store message) are
routed directly to the TE using unsolicited result code:
+CMT: ,<length><CR><LF><pdu> (PDU mode enabled)
+CMT: <oa>,, <scts> [,<tooa>, <fo>, <pid>, <dcs>, <sca>, <tosca>,
<length>] <CR> <LF> <data> (text mode enabled)
3 Class 3 SMS-DELIVERs are routed directly to the TE using
unsolicited result codes defined in <mt>=2. Messages of other
data coding schemes result in indication as defined in <mt>=1.
<bm> Rules for storing received CBMs depend on the relevant data coding
method (refer to GSM 03.38 [2]), the setting of Select CBM Types
(+CSCB) and this value:
0 No CBM indications are routed to the TE.
2 New CBMs are routed directly to the TE using unsolicited result
code: +CBM: <length><CR><LF><pdu> (PDU mode enabled)
or +CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR>
<LF><data> (text mode enabled).
3 Class 3 CBMs are routed directly to TE using unsolicited result
codes defined in <bm>=2.
<ds> 0 No SMS-STATUS-REPORTs are routed to the TE.
1 SMS-STATUS-REPORTs are routed to the TE using unsolicited
result code: +CDS: <length><CR><LF><pdu> (PDU mode
enabled) or +CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>, <st>
(text mode enabled)
2 If SMS-STATUS-REPORT is routed into ME/TA, indication of
the memory location is routed to the TE using unsolicited result
code: +CDSI: <mem>,<index>
<bfr> 1 TA buffer of unsolicited result codes defined within this command
is cleared when <mode> 1...3 is entered.
<mode> 0 Buffer unsolicited result codes in the TA. If TA result code
buffer is full, indications can be buffered in some other place or
the oldest indications may be discarded and replaced with the
new received indications.
1 Discard indication and reject new received message
unsolicited result codes when TA-TE link is reserved (e.g. in
on-line data mode). Otherwise forward them directly to the TE.
2 Buffer unsolicited result codes in the TA when TA-TE link is reserved
(e.g. in on-line data mode) and flush them to the TE
after reservation. Otherwise forward them directly to the TE.
3 Forward unsolicited result codes directly to the TE. TA-TE link
specific inband technique used to embed result codes and data
when TA is in on-line data mode.
<mt> Rules for storing received SMS depend on the relevant data coding
method (refer to GSM 03.38 [2]), preferred memory storage (+CPMS)
setting and this value
Note: If AT command interface is acting as the only display device, the
ME must support storage of class 0 messages and messages in the
message waiting indication group (discard message)
0 No SMS-DELIVER indications are routed to the TE.
1 If SMS-DELIVER is stored in ME/TA, indication of the memory
location is routed to the TE using unsolicited result code:
+CMTI: <mem>,<index>
AT Command Set
2 SMS-DELIVERs, except class 2 messages and messages in
the message waiting indication group (store message) are
routed directly to the TE using unsolicited result code:
+CMT: ,<length><CR><LF><pdu> (PDU mode enabled)
+CMT: <oa>,, <scts> [,<tooa>, <fo>, <pid>, <dcs>, <sca>, <tosca>,
<length>] <CR> <LF> <data> (text mode enabled)
3 Class 3 SMS-DELIVERs are routed directly to the TE using
unsolicited result codes defined in <mt>=2. Messages of other
data coding schemes result in indication as defined in <mt>=1.
<bm> Rules for storing received CBMs depend on the relevant data coding
method (refer to GSM 03.38 [2]), the setting of Select CBM Types
(+CSCB) and this value:
0 No CBM indications are routed to the TE.
2 New CBMs are routed directly to the TE using unsolicited result
code: +CBM: <length><CR><LF><pdu> (PDU mode enabled)
or +CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR>
<LF><data> (text mode enabled).
3 Class 3 CBMs are routed directly to TE using unsolicited result
codes defined in <bm>=2.
<ds> 0 No SMS-STATUS-REPORTs are routed to the TE.
1 SMS-STATUS-REPORTs are routed to the TE using unsolicited
result code: +CDS: <length><CR><LF><pdu> (PDU mode
enabled) or +CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>, <st>
(text mode enabled)
2 If SMS-STATUS-REPORT is routed into ME/TA, indication of
the memory location is routed to the TE using unsolicited result
code: +CDSI: <mem>,<index>
<bfr> 1 TA buffer of unsolicited result codes defined within this command
is cleared when <mode> 1...3 is entered.
fengshachen 2003-09-04
- 打赏
- 举报
有的设置你需要先使用：
AT+CSMS = 1
再设置CNMI
AT+CSMS = 1
再设置CNMI
applewheal 2003-09-04
- 打赏
- 举报
短信息积压?收还是发?
stone921 2003-08-27
- 打赏
- 举报
请问各位高手:如何避免短信积压现象?
lin6194 2003-08-25
- 打赏
- 举报
AT+CNMI：New message indications to TE
Selects the procedure,for how the receiving of new messages from network is indicated to TE when TE is active.
这条指令应该是针对短信、广播、发送报告接收的指令，与发送无关！
AT+CMGS直接发送，不存SIM卡。
AT+CMGW不发送，写到SIM卡。
AT+CMSS从SIM卡发送。
Selects the procedure,for how the receiving of new messages from network is indicated to TE when TE is active.
这条指令应该是针对短信、广播、发送报告接收的指令，与发送无关！
AT+CMGS直接发送，不存SIM卡。
AT+CMGW不发送，写到SIM卡。
AT+CMSS从SIM卡发送。
zhi_liu6 2003-08-24
- 打赏
- 举报
不存的话就是直接发送
电脑里也不会存
除非你纪录at命令
电脑里也不会存
除非你纪录at命令
lin6194 2003-08-22
- 打赏
- 举报
CNMI指令各个手机支持的范围都不一样，
用AT+CNMI=?看一下。
短信不存SIM的话，要是你的电脑关机什么的不就丢了吗？就算保存在手机内存，太多也会丢失，所以还是让它保存到卡上吧，打开新到短信通知，读取以后直接删除，也不会太麻烦啊！
用AT+CNMI=?看一下。
短信不存SIM的话，要是你的电脑关机什么的不就丢了吗？就算保存在手机内存，太多也会丢失，所以还是让它保存到卡上吧，打开新到短信通知，读取以后直接删除，也不会太麻烦啊！
SmallBigCat 2003-08-21
- 打赏
- 举报
呵呵，我这手机不支持at+cnmi=2,2,0,0,0啊
回你的邮件收到了吗？
回你的邮件收到了吗？
yezi7 2003-08-20
- 打赏
- 举报
楼主看到信息请回呀，谢谢了
yezi7 2003-08-20
- 打赏
- 举报
呵呵，楼主，是你呀，我正找你呢
yezi7 2003-08-20
- 打赏
- 举报
at+cnmi=2,1,0,0,0 //短信存入SIM卡
at+cnmi=2,2,0,0,0 //短信直接串口输出，不存SIM卡
怎么用？？？
直接写到串口就可以了
at+cnmi=2,2,0,0,0 //短信直接串口输出，不存SIM卡
怎么用？？？
直接写到串口就可以了
