TC3X_ATC_01_V03.10 Page 128 of 192 11.01.2002
<mode> 0 Buffer unsolicited result codes in the TA. If TA result code
buffer is full, indications can be buffered in some other place or
the oldest indications may be discarded and replaced with the
new received indications.
1 Discard indication and reject new received message
unsolicited result codes when TA-TE link is reserved (e.g. in
on-line data mode). Otherwise forward them directly to the TE.
2 Buffer unsolicited result codes in the TA when TA-TE link is reserved
(e.g. in on-line data mode) and flush them to the TE
after reservation. Otherwise forward them directly to the TE.
3 Forward unsolicited result codes directly to the TE. TA-TE link
specific inband technique used to embed result codes and data
when TA is in on-line data mode.
<mt> Rules for storing received SMS depend on the relevant data coding
method (refer to GSM 03.38 [2]), preferred memory storage (+CPMS)
setting and this value
Note: If AT command interface is acting as the only display device, the
ME must support storage of class 0 messages and messages in the
message waiting indication group (discard message)
0 No SMS-DELIVER indications are routed to the TE.
1 If SMS-DELIVER is stored in ME/TA, indication of the memory
location is routed to the TE using unsolicited result code:
+CMTI: <mem>,<index>
AT Command Set
2 SMS-DELIVERs, except class 2 messages and messages in
the message waiting indication group (store message) are
routed directly to the TE using unsolicited result code:
+CMT: ,<length><CR><LF><pdu> (PDU mode enabled)
+CMT: <oa>,, <scts> [,<tooa>, <fo>, <pid>, <dcs>, <sca>, <tosca>,
<length>] <CR> <LF> <data> (text mode enabled)
3 Class 3 SMS-DELIVERs are routed directly to the TE using
unsolicited result codes defined in <mt>=2. Messages of other
data coding schemes result in indication as defined in <mt>=1.
<bm> Rules for storing received CBMs depend on the relevant data coding
method (refer to GSM 03.38 [2]), the setting of Select CBM Types
(+CSCB) and this value:
0 No CBM indications are routed to the TE.
2 New CBMs are routed directly to the TE using unsolicited result
code: +CBM: <length><CR><LF><pdu> (PDU mode enabled)
or +CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR>
<LF><data> (text mode enabled).
3 Class 3 CBMs are routed directly to TE using unsolicited result
codes defined in <bm>=2.
<ds> 0 No SMS-STATUS-REPORTs are routed to the TE.
1 SMS-STATUS-REPORTs are routed to the TE using unsolicited
result code: +CDS: <length><CR><LF><pdu> (PDU mode
enabled) or +CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>, <st>
(text mode enabled)
2 If SMS-STATUS-REPORT is routed into ME/TA, indication of
the memory location is routed to the TE using unsolicited result
code: +CDSI: <mem>,<index>
<bfr> 1 TA buffer of unsolicited result codes defined within this command
is cleared when <mode> 1...3 is entered.