我的硬盘引导区。。。。
每次开机时显示:
Floppy disk(s) fail(40)
当插入系统盘时显示:
Disk I/O error:status=00000100
Failed to ArcRead the Root partition to check for a signature
接着进行操作系统初始化,有时系统正常,出现装机提示(选择装系统的盘)这时重启就可以
进入系统了,有时出现于下界面,按复位键重启照样可以进入
***stop: 0x0000007F(0x00000000,0x00000000,0x00000000,0x00000000)
UNEXPECTED_KERNEL_MODE_TRAP
If this is the first time you've seen this Stop error screen,restart your compute
r,If this screen appears again,follow these steps:
Run a system diagnostic utility supplied by your hardware manufacturer,In particu
lar,run a menory check,and check for faulty or Mismatiched memory .Try changing v
ideo adapters.
Disable or remove any newly installed hardware and drivers,Disable or remove any
newly installed Softward .If you need to use Safe Mode to remove or drivers compu
ters, restart your computers ,press F8 to Select Advanced startup Options and the
m Select Safe Mode.
Refer to your Getting Started Manual for more information on troubleshooting stop
error.
每次开机都要这样,由于我的机子没有软驱,每次都要这样花费了好多时间,我把硬盘格式化
,对BIOS、cmos进行了相应的设置,都没有用。我都不知道怎么做才可以解决这个问题,求求各位高
手化解。
在下深表谢意!!