急求助:CEPC的启动问题~~~~~~
小弟按照PB4.2的help上的说明制作了CEPC的启动盘,并将一台PC作为目标机引导,可是光出现“Jump 0x0013A420”的错误,并且从PC机COM1传回的信息如下:
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 1
2003 16:06:58
Microsoft Windows CE Ethernet Bootloader 3.3 for CE/PC (Mar 1 2003)
Boot Args @ 0x1DBC6 and ucLoaderFlags is 1
FlashInit
FMD_Init
-FlashInit:Fails!!!!
PCI Device Configurations (2 PCI bus(es) present)...
========================================================
Bus, Device, Function = 0, 10, 0
Vendor ID, Device ID = 0x1106, 0x3065
Base Class, Subclass = 2, 0 => NETWORK_CTLR
Interrupt = 11
BaseAddress[0] = 0xE800 (I/O)
BaseAddress[1] = 0xE9001000 (Memory)
========================================================
Bus, Device, Function = 1, 0, 0
Vendor ID, Device ID = 0x10DE, 0x0028
Base Class, Subclass = 3, 0 => DISPLAY_CTLR
Interrupt = 5
BaseAddress[0] = 0xE6000000 (Memory)
BaseAddress[1] = 0xE4000000 (Memory)
========================================================
FindAllPCINetCard: Searching for PCI Ethernet NIC ...
FindALLPCINetCard(0): Found Ethernet NIC (IRQ=11, IOBase=0xE801, Type=2).
FindPCINetCard:Argument IOBASE=E801, IRQ=B,TYPE=2
FindPCINetCard:Found 1 PCI Ethernet NIC ...
FindPCINetCard: E801 != E800 The IO base not match...
FindPCINetCard: Cannot Found any supported Ethernet NIC
+EDBG:NE2000Init
EDBG:NE2000Init using I/O range at 0x0000E801
EDBG:NE2000:HWRamTest fail. srambase = 0x00010000, ramEnd = 0x00000000
EDBG:NE2000Init:HWInit HWRamTest failed
-EDBG:NE2000Init
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
---------------------------------------------
Failed to initialize Ethernet board!
Please check that the Ethernet card is
properly installed and configured.
PS:启动盘里Autoexec.bat中的NET_IRQ我设为了11,NET_IOBASE设为了0xe801,NET_IP设为我装PB的PC的IP.请大侠们指教,是我的网卡不行还是配置的不对或是其他什么原因呢?谢谢了:)