社区
系统维护与使用区
帖子详情
RedHat9的安装光盘无法拷贝吗??急!!
acai
2003-10-27 11:50:07
我从网上down了9的3张光盘,刻录好后发现无法引导,后来朋友买了一套正版的9,7张盘的,我又把正版的第一张盘刻录了,结果还是无法引导系统!!而用正版的引导盘就可以正常启动系统,为何??难道光盘防拷贝吗??
...全文
31
5
打赏
收藏
RedHat9的安装光盘无法拷贝吗??急!!
我从网上down了9的3张光盘,刻录好后发现无法引导,后来朋友买了一套正版的9,7张盘的,我又把正版的第一张盘刻录了,结果还是无法引导系统!!而用正版的引导盘就可以正常启动系统,为何??难道光盘防拷贝吗??
复制链接
扫一扫
分享
转发到动态
举报
写回复
配置赞助广告
用AI写文章
5 条
回复
切换为时间正序
请发表友善的回复…
发表回复
打赏红包
ayiiq180
2003-10-28
打赏
举报
回复
你的刻录方式不对把?需要直接光盘对拷才行
回炉重造,学习编程中。。。
2003-10-28
打赏
举报
回复
直接用复制光盘刻录一张
acai
2003-10-28
打赏
举报
回复
原来是这样啊!!我试试先!!
sungod8
2003-10-28
打赏
举报
回复
光盘对拷才行
skyyjl
2003-10-28
打赏
举报
回复
不是,估计你考盘的时候不是选择复制光盘,你选择了考光盘文件
新上网行为管理系统
安装
调试手册.doc
系统平台:
RedHat
Linux Enterprise 4;
安装
方式: 自定义
安装
;
安装
前设置: 启用防火墙(允许ssh服务和ftp服务) 软件包选择: 只勾选 ftp服务器、内核开发工具; 准备工作: 将随机
光盘
中的programlinux文件夹
拷贝
到系统根(/)目录下。
RedHat
Linux配置yum本地资源
安装
个linux平台的oracle数据库,在oracle检测的时候发现有些系统补丁包没有
安装
,手动rpm
安装
报有些关联包也没有
安装
,想想如果一个一个rpm的话累死人了要,所以想起用yum来进行
安装
,但是系统上的yum没有配置好,上网辛勤的搜索了下经过九曲十八弯后终于搞定,现在和大家分享下具体过程。 1.创建个目录 mkdir /var/yum 并从
光盘
介质中把Server目录下的所有文件
拷贝
到刚创建的目录里(/var/yum)。 cp -r /media/cdrom /var/yum ps:/media/cdrom是mount光驱的目录 2.
安装
crea
U6
Redhat
系统的U盘
安装
本课程是《U盘分区与启动》课程的深化,聚焦于企业中广泛应用的
Redhat
系统,介绍用U盘来启动和
安装
Redhat
系统,课程内容包括:
Redhat
系统有什么特点? 如何制作
Redhat
的
安装
U盘? 如何利用
安装
U盘来
安装
Redhat
系统...
rhel5.6yum源配置
本地yum配置(
光盘
)、网络yum配置(centsos源) 先试试将对应版本目录下的yum-centos.repo
拷贝
至/etc/yum.repos.d/下,运行yum makecache,若不能缓冲数据库,再看README。
vmtools-linux.iso
过程: 1.在虚拟机上
安装
了vmware,
安装
完成后,默认vm tools是没有
安装
的,启动后在下方提示没有
安装
虚拟工具,
安装
过程省略; 2.
安装
redhat
,这个
安装
过程就省略,没安过的可以也去G一下; 3.
安装
vm tools: 1)以ROOT身份进入LINUX 2)按下 CTRL ALT组合键,进入主操作系统,点击VMWARE状态栏
安装
提示,或者点击 虚拟菜单下的
安装
虚拟机工具子菜单. 3)确认
安装
VMWARE TOOLS. 这时我们并没有真正的
安装
上了VMWARE TOOLS软件包,如果您点击菜单:DEVICES,您就会发现光驱的菜单文字变为:ide1:0-> C:\Program Files\VMware\VMware Workstation\Programs\linux.iso,这表示VMWARE将LINUX的ISO映象文件作为了虚拟机的
光盘
4)鼠标点击LINUX界面,进入LINUX. 5)运行如下命令,注意大小写. mount -t iso9660 /dev/cdrom /mnt 加载CDROM设备,这时如果进入 /mnt 目录下,你将会 发现多了一个文件:vmware-linux-tools.tar.gz.这就是WMWARE TOOLS的LINUX软件包,也就是我们刚才使用WINISO 打开LINUX.ISO文件所看到的. cp /mnt/vmware-linux-tools.tar.gz /tmp 将该软件包
拷贝
到LINUX的 TMP目录下. umount /dev/cdrom 卸载CDROM. cd /tmp 进入TMP目录 tar zxf vmware-linux-tools.tar.gz 解压缩该软件包,默认解压到vmware-tools-distrib 目录下(与文件名同名). cd vmware-linux-tools 进入解压后的目录 这时要进入文本模式下运行下面的命令 ./install.pl 这时install提示你是否需要备份以前的配置文件,建议选择"y". 等待INSTALL运行完成后,这时键入 STARTX 命令,启动LINUX图形界面,vm中不再提示没有
安装
虚拟机工具了 在Ubuntu下
安装
VMware-Tools不像在Windows下
安装
容易,昨晚整了挺长时间终于安上了.方法在下面. 感谢提供方法的大侠! VMware Tools位置:VMware的
安装
路径\VMware\VMware Workstation\linux.iso 启动后按Esc选择recovery mode登陆.然后点击"虚拟机"→"
安装
VMware Tools". [root@rd01 ~]# mount /cdrom # 有时可能加载不了,这时就要先将系统关闭,再手动指定 ISO 映像: [root@rd01 ~]# cd /cdrom [root@rd01 ~]# ls -a [root@rd01 ~]# cp VMwareTools-5.5.1-19175.tar.gz /tmp [root@rd01 ~]# cd /tmp [root@rd01 ~]# tar zxpf VMwareTools-5.5.1-19175.tar.gz [root@rd01 ~]# cd vmware-tools-distrib [root@rd01 vmware-tools-distrib]# ./vmware-install.pl Creating a new installer database using the tar3 format. Installing the content of the package. #
安装
过程的画面,全部使用默认值,一直按 Enter 就对了 In which directory do you want to install the binary files? [/usr/bin] What is the directory that contains the init directories (rc0.d/ to rc6.d/)? [/etc/rc.d] What is the directory that contains the init scripts? [/etc/rc.d/init.d] In which directory do you want to install the daemon files? [/usr/sbin] In which directory do you want to install the library files? [/usr/lib/vmware-tools] Thepath "/usr/lib/vmware-tools" does not exist currently. This programisgoingto create it, including needed parent directories. Is thiswhatyou want? [yes] In which directory do you want to install the documentation files? [/usr/share/doc/vmware-tools] Thepath "/usr/share/doc/vmware-tools" does not exist currently.Thisprogram isgoing to create it, including needed parent directories.Isthis what you want? [yes] The installation of VMware Tools 5.5.1 build-19175 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl". Before running VMware Tools for the first time, you need to configure it by invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want this program to invoke the command for you now? [yes] Stopping VMware Tools services in the virtual machine: Guest operating system daemon: [ 确定 ] Trying to find a suitable vmhgfs module for your running kernel. The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel. pcnet32 30153 0 Unloading pcnet32 module Trying to find a suitable vmxnet module for your running kernel. The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel. Detected X.org version 6.8. 关闭控制台鼠标服务: [ 确定 ] 启动控制台鼠标服务: [ 确定 ] Please choose one of the following display sizes (1 - 13): # 显示分辨率,这里是以 1024x768 为例 # VMware Tools
安装
的时候,会自动修改 X server 的配置文件 [1] "640x480" [2]< "800x600" [3] "1024x768" [4] "1152x864" [5] "1280x800" [6] "1152x900" [7] "1280x1024" [8] "1376x1032" [9] "1400x1050" [10] "1680x1050" [11] "1600x1200" [12] "1920x1200" [13] "2364x1773" Please enter a number between 1 and 13: [2] 3 X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.9-34.EL i686 [ELF] Current Operating System: Linux rd01.domain 2.6.9-34.EL #1 Wed Mar 8 00:07:35 CST 2006 i686 Build Date: 04 May 2006 Build Host: x8664-build.centos.org Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present OSKernel: Linux version 2.6.9-34.EL (buildcentos@build-i386) (gccversion3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Wed Mar 8 00:07:35 CST 2006P Markers: (--) probed, (**) from config file, (==) default setting, ( ) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. ( ) Log file: "/tmp/vmware-config0/XF86ConfigLog.3131", Time: Mon Jun 12 20:57:34 2006 ( ) Using config file: "/tmp/vmware-config0/XF86Config.3131" (WW) VMWARE(0): Failed to set up write-combining range (0xf0000000,0x1000000) X is running fine with the new config file. Starting VMware Tools services in the virtual machine: Switching to guest configuration: [ 确定 ] Guest filesystem driver: [ 确定 ] DMA setup: [ 确定 ] Guest operating system daemon: [ 确定 ] The configuration of VMware Tools 5.5.1 build-19175 for Linux for this running kernel completed successfully. You must restart your X session before any mouse or graphics changes take effect. You can now run VMware Tools by invoking the following command: "/usr/bin/vmware-toolbox" during an XFree86 session. To use the vmxnet driver, restart networking using the following commands: /etc/init.d/network stop rmmod pcnet32 rmmod vmxnet depmod -a modprobe vmxnet /etc/init.d/network start Enjoy, --the VMware team [root@rd01 vmware-tools-distrib]# shutdown -r now # 修改完成之后,重新启动计算机,让 VMware Tools 生效. == 重启后,你可能会发现还是要按"Ctrl Alt"释放鼠标(VM6.0没这问题了),我用的是5.5.3,要手动执行才有效果. 通过终端运行VMware-Tools: 点击Ubuntu桌面左上角的Applications→附件→终端,会打开一个类似Windows中记事本的程序,在里面输入以下内容($是自带的,不用专门输入): $ /usr/bin/vmware-toolbox 但如果你嫌麻烦,我们就需要让vmware-toolbox实现开机自动运行.点击 Ubuntu菜单:System→首选项→会话→Startup Programs,Add一个Name叫"vmware-toolbox",Command是"/usr/bin/vmware-toolbox"的启动 程序.这样每次开机后就能自动运行VMware Tools了.重启Ubuntu看看效果吧!(注意:vmware-toolbox并不是在后台隐藏运行的,启动后不要关闭). VMware Tools固然是个好东西,但也有副作用,比如说:虚拟机中的鼠标的滚轮不好使了.我们这样解决这个问题,还是打开终端,输入: $ sudo gedit /etc/X11/xorg.conf 这个命令使系统以root权限打开鼠标配置文件/etc/X11/xorg.conf.把文件中的 Option "Protocol" "ps/2" 改成 Option "Protocol" "IMPS/2" 重启Ubuntu搞定
系统维护与使用区
19,613
社区成员
74,602
社区内容
发帖
与我相关
我的任务
系统维护与使用区
系统使用、管理、维护问题。可以是Ubuntu, Fedora, Unix等等
复制链接
扫一扫
分享
社区描述
系统使用、管理、维护问题。可以是Ubuntu, Fedora, Unix等等
社区管理员
加入社区
获取链接或二维码
近7日
近30日
至今
加载中
查看更多榜单
社区公告
暂无公告
试试用AI创作助手写篇文章吧
+ 用AI写文章