请yonyon(小墨) 和goodboy1881(三井) 笑纳!!---进来接分!!

wandou999 2004-04-22 04:17:19

我刚来不久,希望大家多照顾!!

我会根据题的难易程度给分,"另起帖"表示请大家多帮忙!!

...全文

35 3 打赏收藏转发到动态举报

写回复

3 条回复

切换为时间正序

请发表友善的回复…

发表回复

晨星 2004-04-22

打赏
举报

回复

以后不要这样做了，另起帖在这里并不被提倡。如果认为自己的问题有一定难度，那么一开始就应该将分数设得高一些。

已转移帖子到非技术区。

积木 2004-04-22

打赏
举报

回复

:)

yonyon 2004-04-22

打赏
举报

回复

不客气

w25n01gv revg 032116.pdf The W25N01GV (1G-bit) Serial SLC NAND Flash Memory provides a storage solution for systems with limited space, pins and power. The W25N SpiFlash family incorporates the popular SPI interface and the traditional large NAND non-volatile memory space. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 25mA active and 10µA for standby. All W25N SpiFlash family devices are offered in space-saving packages which were impossible to use in the past for the typical NAND flash memory.

1.二相步进电机细分驱动源码 STM32F103VCT6 2.STM32 + DMX512 接收程序或（RS485） 3.光电编码器程序（没有可开环控制） 4.FSMC TFT驱动程序带菜单功能 5.步进电机细分驱动程序矢量控制加减速控制，PWM斩波驱动方式。

uint8_t Program_verify(uint8_t* buff1, uint8_t* buff2, uint32_t count); void WB_Serial_NAND_Pageprogram_Pattern(uint8_t addh, uint8_t addl, uint8_t* program_buffer, uint32_t count); void WB_Serial_NAND_Program_Excute(uint8_t addh, uint8_t addl); /* status check */ uint8_t WB_Check_Embedded_ECC(); uint8_t WB_Check_Program_Erase_Fail_Flag(); uint8_t WB_Read_Serial_NAND_StatusRegister(uint8_t sr_sel); void WB_Serial_NAND_ReadyBusy_Check(); uint32_t WB_NAND_Read_JEDEC_ID(); uint8_t WB_Serial_NAND_bad_block_check(uint32_t page_address); void WB_Serial_NAND_LUT_Read(uint16_t* LBA, uint16_t* PBA); /* Stack function for W25M series */ void WB_Die_Select(uint8_t select_die); /* status set */ void WB_Enable_Embedded_ECC(); void WB_Disable_Embedded_ECC(); void WB_Enable_Buffer_mode(); void WB_Disable_Buffer_mode(); void WB_Serial_NAND_StatusRegister_Write_SR1(uint8_t SR1); void WB_Serial_NAND_StatusRegister_Write_SR2(uint8_t SR2); void WB_Serial_NAND_StatusRegister_Write_SR3(uint8_t SR3); void WB_NAND_Reset(); void WB_Protect(); void WB_Unprotect(); void WB_Serial_NAND_LUT_Set(uint16_t LBA, uint16_t PBA); /* erase function */ void WB_Serial_NAND_BlockErase(uint8_t PA_H, uint8_t PA_L); /* read function */ void WB_Serial_NAND_PageDataRead(uint8_t PA_H, uint8_t PA_L); void WB_Serial_NAND_Normal_Read(uint8_t addh, uint8_t addl, uint8_t* buff, uint32_t count); void WB_Serial_NAND_Continuous_Normal_Read(uint8_t* buff, uint32_t count);

下面一章概述了在目标系统上设置和配置 emWin 的基础步骤，其中还包括简单的程序示例。如果有不确定的地方请参阅以后部分，后面章节中对大多数主题进行了更为详细的探讨。在您开始更复杂的编程之前，您最有可能需要参考手册的其它部分。

官网没找到模拟器自己搭建了一个 ,找了很久要么版本对不上, 要么没有UI 建立器

15,440

社区成员

58,167

社区内容

发帖

与我相关

我的任务

社区管理员

加入社区

近7日
近30日
至今

加载中

查看更多榜单

社区公告

暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章