求救懂分区参数编辑的一流高手！thanks

[sinotao1]

我的分区结构是这样的：
(win2k)c:6G (backup)d:10G (winxp)e:10G (win2003)f:10G (csdn)g:15G
(work)h:6G
问题出现在我将最后两个分区中的数据移走后用pqmagic合并，(work)h:作为(csdn)g:的一个文件夹，但是进行过程缓慢，强行重新启动后，在(win2003)中最后两个分区不可见，但在(winxp)中仅能看到容量较小的(work)h:,由于大量资料已经在合并分区之前已经存放在(csdn)g:中，因此一心想恢复(csdn)g:分区。
通过网络上的文章介绍，使用了深山红叶的cdxprun超酷系统维护工具盘中的diskgen工具尝试重建分区表，问题严重了，系统不能正常启动，用dos命令发现只有(winxp)e:可以访问，存放重要启动文件的c: 无法访问 ,从硬盘启动提示：ntldr is missing。现在用cdxprun系统启动盘启动电脑，发现能够识别已有的几个分区，用无损数据的分区工具partition manger 出现帖子中附件列出的分区信息。用pqmagic出现#108分区参数错误 ， 用kv3000自动重建分区表，出现分区表无误，没有任何更新分区表的动作；用diskman出现2号分区参数错误，是否更正，退出重新启动后，问题依旧，多次尝试仍然提示2号分区参数错误，更新不了分区表。
问题的关键出现在使用diskgen工具重建分区表导致的分区参数错误，现在我想通过分区表编辑器修正分区错误，因此希望谁能提供关于60G(6G,10G,10G,10G,15G,and rest)硬盘的分区表参数，以进行分区编辑。谢谢！


======================================================================
Disk Geometry Information for Disk 1: 2491 Cylinders, 255 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
======================================================================
0 0 80 0 1 1 07 764 254 63 63 12,289,662
0 1 00 765 0 1 0F 1023 254 63 12,289,725 27,728,190
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 1 00 765 0 1 0F 2490 254 63 12289725 27728190
12,289,725 0 00 765 1 1 07 1023 254 63 12,289,788 12,289,662
Info: End C,H,S values were large drive placeholders.
Actual values are:
12289725 0 00 765 1 1 07 1529 254 63 12289788 12289662
12,289,725 1 00 1023 0 1 05 1023 254 63 24,579,450 15,438,465
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
12289725 1 00 1530 0 1 05 2490 254 63 24579450 15438465
24,579,450 0 00 1023 1 1 07 1023 254 63 24,579,513 15,438,402
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
24579450 0 00 1530 1 1 07 2490 254 63 24579513 15438402

[sinotao1]

用工具显示的分区信息及部分关键错误图片：
http://www.downfirst.com/attachments/5dnC_partitioninfo_disk2_info.jpg
文本显示如下：
======================================================================Disk Geometry Information for Disk 2: 7753 Cylinders, 240 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
======================================================================
0 0 80 0 1 1 07 812 194 58 63 12,289,657
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 239, not 194.
Error #108: Partition didn't end on cylinder boundary.
ucEndSector expected to be 63, not 58.
0 1 00 812 195 1 0F 1023 17 63 12,289,725 66,411,009
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 1 00 812 195 1 0F 5205 17 63 12289725 66411009
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 195.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 239, not 17.
0 2 00 1023 18 63 17 1023 112 63 78,700,734 117,231,345
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 2 00 5205 18 1 17 12958 112 63 78700734 117231345
Error #105: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 18.
Error #109: Partition ends after end of disk.
ucEndCylinder (12958) must be less than 7753.
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 239, not 112.
12,289,725 0 00 812 196 1 07 1023 119 63 12,289,788 20,482,812
Info: End C,H,S values were large drive placeholders.
Actual values are:
12289725 0 00 812 196 1 07 2167 119 63 12289788 20482812
Error #105: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 196.
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 239, not 119.
12,289,725 1 00 1023 120 1 05 1023 239 63 32,772,600 20,495,160
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
12289725 1 00 2167 120 1 05 3522 239 63 32772600 20495160
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 120.
SOFT
32,772,600 0 00 1023 121 1 0C 1023 44 63 32,772,663 20,482,812
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
32772600 0 00 2167 121 1 0C 3522 44 63 32772663 20482812
Error #105: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 121.
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 239, not 44.
32,772,600 1 00 1023 45 1 05 1023 239 63 53,255,475 8,207,325
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
32772600 1 00 3522 45 1 05 4064 239 63 53255475 8207325
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 45.
53,255,475 0 00 1023 46 1 07 1023 14 63 53,255,538 8,193,087
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
53255475 0 00 3522 46 1 07 4064 14 63 53255538 8193087
Error #105: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 46.
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 239, not 14.
53,255,475 1 00 1023 15 1 05 1023 239 63 61,448,625 12,291,615
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
53255475 1 00 4064 15 1 05 4876 239 63 61448625 12291615
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 15.
61,448,625 0 00 1023 16 1 07 1023 209 63 61,448,688 12,289,662
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
61448625 0 00 4064 16 1 07 4876 209 63 61448688 12289662
Error #105: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 16.
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 239, not 209.
61,448,625 1 00 1023 90 1 05 1023 239 63 74,380,950 4,333,770
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
61448625 1 00 4919 90 1 05 5205 239 63 74380950 4333770
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 90.
74,380,950 0 00 1023 202 63 99 1023 17 63 74,388,006 4,312,728
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
74380950 0 00 4919 202 1 99 5205 17 63 74388006 4312728
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 202.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 239, not 17.