问，谁有 ActiveReport 2.0 Professional 的软件下载及破解方法？

wangjunpenyou 2004-09-05 07:03:04
我的邮箱是 yklcsoft@yahoo.com.cn
谢谢
...全文
95 1 打赏 收藏 转发到动态 举报
AI 作业
写回复
用AI写文章
1 条回复
切换为时间正序
请发表友善的回复…
发表回复
RUKYO 2004-09-06
  • 打赏
  • 举报
 回复
http://www.ytd18.cn/aspnet/show.aspx?id=3367&cid=118

jinesc.6600.org/myweb/main.asp?room=10&page=1
BURNINTEST--硬件检测工具
PassMark BurnInTest V5.3 Copyright (C) 1999-2008 PassMark Software All Rights Reserved http://www.passmark.com Overview ======== Passmark's BurnInTest is a software tool that allows all the major sub-systems of a computer to be simultaneously tested for reliability and stability. Status ====== This is a shareware program. This means that you need to buy it if you would like to continue using it after the evaluation period. Installation ============ 1) Uninstall any previous version of BurnInTest 2) Double click (or Open) the downloaded ".exe" file 3) Follow the prompts UnInstallation ============== Use the Windows control panel, Add / Remove Programs Requirements ============ - Operating System: Windows 2000, XP, 2003 server, Vista (*) - RAM: 32 Meg - Disk space: 6 Meg of free hard disk space (plus an additional 10Meg to run the Disk test) - DirectX 9.0c or above software for 3D graphics and video tests (plus working DirectX drivers for your video card) - SSE compatible CPU for SSE tests - A printer to run the printer test, set-up as the default printer in Windows. - A CD ROM + 1 Music CD or Data CD to run the CD test. - A CD-RW to run the CD burn test. - A network connection and the TCP/IP networking software installed for the Network Tests Pro version only: - A serial port loop back plug for the serial port test. - A parallel port loop back plug for the parallel port test. - A USB port loop back plug for the USB port test. - A USB 2.0 port loop back plug for the USB 2.0 port test. - PassMark ModemTest V1.3 1010 (or higher) for Plugin Modem testing. - PassMark KeyboardTest V2.2 1011 (or higher) for Plugin Keyboard testing. - PassMark Firewire Plugin V1.0 1000 (or higher) and a 揔anguru FireFlash?drive for Plugin Firewire testing. (*) Windows 2000 does not support the CD-RW burn test. The advanced RAM test is only available under Windows 2000 and Windows XP professional (the other RAM tests are supported under the other OS's). Users must have administrator privileges. Windows 98 and Windows ME ========================= Windows 98 and ME are not supported in BurnInTest version 5.3 and above. Use a version of BurnInTest prior to 5.2 for compatibility with W98 and ME. Windows 95 and Windows NT ========================= Windows 95 and NT are not supported in BurnInTest version 4.0 and above. Use a version of BurnInTest prior to 3.1 for compatibility with W95 and NT. Version History =============== Here is a summary of all changes that have been made in each version of BurnInTest. Release 5.3 build 1035 revision 4 WIN32 release 10 November 2008 - Lenovo China specific build. Lenovo system detection changes. Release 5.3 build 1035 revision 3 WIN32 release 7 November 2008 - Lenovo China specific build. Lenovo system detection changes. Release 5.3 build 1035 revision 2 WIN32 release 6 November 2008 - Lenovo China specific build. Lenovo logo and Lenovo system detection changes. Release 5.3 build 1035 WIN32 release 5 November 2008 - Lenovo China specific build. Changes include: Lenovo logo added, Lenovo system support only, 32-bit BurnInTest restricted to 32-bit Windows and BurnInTest run as administrator. Release 5.3 build 1034 WIN32 release 3 October 2008 - Correction to setting the CD burn test drive in preferences. - Changed the mechanism to check for the required DirectX Direct3D as the previous method did not work on some system (some W2003 servers). - Enhanced the mechanism to report memory hardware errors in the Memory torture test. Release 5.3 build 1033 WIN32 release 1 October 2008 - Changes to correct a BurnInTest crash problem on some systems. When the disk and standard RAM tests are run for many hours, BurnInTest may have disappeared with no error message. Release 5.3 build 1030 WIN32 release 25 September 2008 - Changes to investigate a BurnInTest crash problem on XP SP3. Release 5.3 build 1028 WIN32 release 11 September 2008 - Two 2D Video memory test crash bug workarounds implemented. Crashes in (i) DirectX DirectShow and (ii) ATI atiumdag.dll library. - A hang on startup has been corrected. A 2 minute timeout has been added to the collection of system information. - Video playback, Hard disk and CD/DVD test 'no operations' error reporting changed. - When BurnInTest crashes, it will not generate a "minidump" file. Minidumps will need to be sent to Microsoft as per the normal process. However, a log entry will be added to the normal BurnInTest log. - Changes to trace logging to reduce activity when trace logging is not turned on. - Note: We have seen a report of the Video Playback failing (crash) due to a faulty video codec, ffdshow.ax. If you are using this we suggest you try a different Video file and codec. Release 5.3 build 1027 revision 0003 WIN32 release 19 August 2008 - Changed the 2D test to wait for the Video Playback test in order to allow memory allocation for the Video playback test. - Changed the Memory test to wait for the Video Playback test and 3D test to allow memory allocation for these tests. - Minor changes to the No operation error watchdog timer for the CD and Hard disk tests. - Minor correction to the Butterfly seek test. - Video playback trace logging increased. Release 5.3 build 1027 revision 0002 WIN32 release 19 August 2008 - Video playback trace logging increased. Release 5.3 build 1027 WIN32 release 31 July 2008 - Corrected a bug where BurnInTest would fail to start if Activity trace level 2 logging (debug level logging) was turned on and the Logging Summarize option was also selected. - Minor change to the serial port test where, if "Disable RTS/CTS and DSR/DTR test phase" was selected the DTR and RTS lines would be explicitly disabled to prevent any toggling of these lines. Previously these where enabled, but not explicitly toggled. Release 5.3 build 1026 WIN32 release 17 July 2008 - Updated Level 2 and Level 3 CPU cache information for newer Intel CPU's. - Updated the detection of Hyperthreading and the number of logical CPUs for a new Intel CPU. Release 5.3 build 1025 WIN32 release 11 July 2008 - Corrected a Disk test bug where on rare occasions a verification error is incorrectly displayed. This is during the random seeking phase of the "Random data with random seeking" test mode and only occurs with some specific test settings. Release 5.3 build 1024 WIN32 release 10 July 2008 - Workaround for the rare crash bug in Vista in atklumdisp.dll at address 0x730676ae. - Added trace debug information for BurnInTest startup and the 3D test. Release 5.3 build 1022 WIN32 release 12 June 2008 - Corrected a bug where the 2D video memory test in BurnInTest v5.3.1020 and v5.3.1021 would report a "Not enough video memory available for test" error if the test was run a couple of times (without closing BurnInTest). Release 5.3 build 1021 WIN32 release 5 June 2008 - 32-bit BurnInTest PRO 5.3.1020 would not start on Windows 2000. This has been corrected. Release 5.3 build 1020 WIN32 release 29 May 2008 - BurnInTest could have crashed on accessing bad video memory hardware in the 2D test. This problem is now just reported as an error (and BurnInTest) continues. - When BurnInTest crashes, it should now generate a "minidump" file to help debug which system component caused the failure (32-bit Pro version only). - Other minor changes. Release 5.3 build 1019 WIN32 release 16 May 2008 - Corrected rare crash bugs in the 2D and Video tests. - Added a hot Key, F4, to set the auto run flag and run the tests (i.e. set "-r" and then run the tests). - Other minor changes. Release 5.3 build 1018 WIN32 release 16 April 2008 - Added an operation watchdog timer for all tests. In rare cases, a single test can stop in the operating system - i.e. there is a problem in the operating system/ device driver that prevents control being returned to the BurnInTest for that test. This was added for specialized serial port hardware that could lockup after several hours of testing. Release 5.3 build 1017 WIN32 release 3 April 2008 - Corrected the Advanced Network test to run on non-English Operating Systems. Release 5.3 build 1016 WIN32 release 17 March 2008 - Added additional USB 2.0 Loopback plug test initialization to ensure plugs are in a 'clean' state when starting the USB tests. This was added due to reported USB data verification errors after scripted USB testing across multiple reboots. Release 5.3 build 1015 WIN32 release 27 February 2008 - Increased error reporting detail for the standard RAM test, when the -v command line option is used. Release 5.3 build 1014 WIN32 release 30 January 2008 - Corrected a problem where the loopback sound test could run out of memory if run for several days. Release 5.3 build 1013 WIN32 release 31 December 2007 - Improved the reporting of COM port errors such that in the rare case a COM port locks up in the Operating System, the error is still reported. - Corrected a bug, where in rare cases, the result summary could be duplicated in a log file. - Updated license management, in an attempt to remove a rare crash on startup. Release 5.3 build 1012.0002 WIN32 release 31 October 2007 - New build of Rebooter (64-bit Windows correction). - Clarifications in the help file. Release 5.3 build 1012 WIN32 release 17 October 2007 - Changed the Standard Network Test, "Test all available NICs" such that the number of Network Addresses specified in Preferences->Network will be the number of NICs tested. This will error faulty NICs that are not detected by the BurnInTest auto NIC detection mechanism. - Minor change to the 2D memory test when run with the 3D test (multiple large windows) and the RAM test. Aimed at correcting sympton: Access Violation 0x00404CF9. - Corrections to the mapping of paths with ".\". Release 5.3 build 1011 rev 2 WIN32 release 17 September 2007 - Modified the Multi-Process torture test to better describe a new error message introduced in V5.3.1010. Release 5.3 build 1011 - Public release WIN32 release 11 September 2007 - Corrected a bug where "Limited Evaluation Version" could be displayed even after BUrnInTest is licensed (problem introduced in 32-bit BITPRO V5.3.1010). - Changed the Sound test to allow any of the tests (Wave, Midi or MP3) to be excluded from testing by blanking the filename. - The Command line parameter "-j" (cycle disk test patterns after each test file) could fail during the Random data test due to the mechanism used in BurnInTest. The Random data test is now excluded from the test when (and only when) the "-j" command line parameter is specified. - In rare circumstances, the 2D test number of operations could potentially overflow and become negative. This has been corrected. - In rare circumstances, BurnInTest could hang if there was a system problem in rebooting the system (ie. it failed to shutdown) using PassMark Rebooter. This has been corrected. Release 5.3 build 1010 - Public release WIN32 release 28 August 2007 WIN64 release 28 August 2007 - As BurnInTest exercises system components, it is possible for faulty hardware or device drivers to cause software exceptions. These are normally seen as Windows reporting an "Access Violation". Changes have been made to handle these errors for the memory tests (for faulty RAM) and direct device driver access (for some device driver errors), as well as overarching more generic handling of these types of errors. - Corrected a software failure bug on startup (particularly Vista) where a DirectX function was causing software failures in "dsetup.dll". - Updated the "Activity Event" generated with the periodic results summary report to be numbered (from 1 upwards) such that when "Logging->Summarize", these events are not summarized. - Corrected a bug where the HTML log name could include a duplicate of the filename prefix. - Updated to the Common Errors section of help. Release 5.3 build 1009 - Public release WIN32 release 16 August 2007 - Corrected a 'zip' version cleanup problem. Release 5.3 build 1008 - Komputer Swiat Expert magazine version WIN32 STD release 14 August 2007 Release 5.3 build 1007 - Public release WIN32 release 7 August 2007 - Corrected a disk test startup problem for some large RAID systems when SMART testing is selected. - Added additional logging for the disk test when an error occurs. - Changed the 3D test when run with the 2D EMC test to be 'behind' the EMC scrolling H's test. Allowed the test to be easily exited when running the 3D test in Fullscreen mode. - Minor corrections to the Advanced Network test. - Changed the log file reference of "Network Name" to "Computer Name". WIN64 specific: - MMX and 3DNow! are obsolete for native 64-bit applications. BurnInTest has been changed to show "NA" (Not applicable) in the test window for these tests. Release 5.3 build 1006 - Limited release WIN32 release 17 July 2007 - Standard Network Test changes: - Increased the number of destination IP addresses from 4 to 6. - Added an option (default) "Test all available NICs", which will force traffic down every system NIC with a basic algorithm of NIC1 to IP Address 1, NIC2 to IP Address 2 etc. - Advanced Network test changes: - Simplified the test. - Removed the UDP and FTP options. The Standard Network test can be used as a UDP test. - Removed the Advanced Network test specific logging, and included all relevant logging in the standard BurnInTest logging mechanism. - Replaced the complicated dynamic balancing of any system NIC to any Endpoint NIC with a simpler static allocation on test startup. - Changed the error detection mechanism to detect errors much more quickly. - Re-worked the errors reported. - Changed the CPU throttling mechanism to reduce the CPU load. - Updated endpoint.exe. - Removed checkend.exe (now obsolete). - Changed the logging rollover to work with the output of interim results (e.g. per 1 minute). Previously rollover only occurred on error events written to the log. This also corrected an issue where interim results summary logging could be written to the physical disk with some delay (based on Windows disk caching). - Corrected the "Unknown" reporting of some operating systems. - Added the skipping of the Butterfly seek disk test when run on Vista and insufficient privileges. A notification of this is logged. - Intel Quad core L2 cache size reporting has been added. - Added new SMART threshold descriptions. - Added new disk test options, accessed via command line parameters: /ka: keep disk test files in all cases (c.f. /k keep disk test files on error). /j: cycle patterns between test files. Note: Random seeking will be skipped in this case. This option has been added to allow multiple test patterns to be used across very large disks. - Added an option to make some test settings unavailable to the user. An example configuration file available on request. Release 5.3 build 1005 0001 (STD only) - Public release WIN32 release 29 June 2007 - Corrected a bug introduced in v5.3.1005.0000 STD (only) where the disk test would use up more and more system resources, thus causing test failures. Release 5.3 build 1005 rev 0003 (PRO only) - Limited public release WIN32 release 21 June 2007 - Correction to the behavior of a static RAM test pattern (rather than the default Cyclic pattern). Release 5.3 build 1005 rev 0002 (PRO only) - Limited public release WIN32 release 15 June 2007 - The "Select all CD/DVD drives" preferences option has been made user configurable, rather than using pre-defined test settings. Release 5.3 build 1005 rev 0001 (PRO only) - Limited public release WIN32 release 13 June 2007 - Bug correction for the CD auto selection feature. Release 5.3 build 1005 - Public release WIN32 release 18 May 2007 WIN64 release 18 May 2007 - In a number of cases, such as when specifying the post test application, uppercase application names were not accepted. This has been corrected. - The default font height in the 2D scrolling H's test should have been Arial 9. This has been changed. - The BurnInTest Video playback test incompatibility with Nero 6 and Nero 7 has been resolved. - The BurnInTest disk test throughput for dual core systems has been improved. Release 5.3 build 1004 rev2 - Limited release WIN32 release 8 May 2007 - Changed the Standard Network Test to better report packet error ratios. In addition, a new warning has been added to indicate that errors have been detected but not enough packets have been attempted to be sent to determine accurately whether the configured error ratio has been exceeded. - Corrected a bug where the "append to existing" logging option did not work across scripted reboots, and a new log file was created instead of appending to the existing log file. - If the 3D test was running, then BurnInTest blocked a forced close of BurnInTest, this blocking has been removed. - Changed the PASS and FAIL windows so they can now also be closed by selecting the Windows Close "X" button. Release 5.3 build 1004 - Public release WIN32 release 10 April 2007 WIN64 release 10 April 2007 - Corrected a problem introduced in BurnInTest v5.2 where BurnInTest could run out of memory (the main symptom) when tests where run for long periods (> 12hours). WIN64 specific: - Corrected a bug where the number of cores reported on a Quad core system was incorrectly reported as CPU packages. Release 5.3 build 1003 - Limited release WIN32 release 3 April 2007 - A new 2D GUI (Graphical User Interface) test has been added to the standard 2D graphics test. - Resolved an issue where BurnInTest would fail to start on Vista systems with DEP enabled for all programs. - On some systems, the Disk test could pause momentarily even when a duty cycle of 100% was specified. This pause has been removed. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipped as they are unavailable for testing. - Minor bug corrections. Release 5.3 build 1002 rev 0001 - Limited release WIN32 release 16 March 2007 - Changes to the new 3D test: - Added a Full screen non-windowed test for the primary monitor, where the resolution can be selected from those supported by the Graphics card. - Added the user option of changes the vertical sync in the full screen non-windowed test to be either the Maximum rate of the graphics card, or to be the rate of the monitor (this may prevent some flicker). - Added a more complex water texture using DirectX Vertex Shader 2.0 and Pixel Shader 2.0 effects (if supported by the graphics card). This applies to 3D test windows that are 800x600 or larger. - Changed some error messages from window displays (that require user intervention) to standard error reporting. Added new 3D error messages and more detail in the error reporting. - Changed the definition of an operation to be a successfully displayed frame. - Changed the definition of a cycle to be 2000 frames. - Changed 2D video memory test to wait until the 3D test starts (as per V5.2 and earlier). - A new version of rebooter has been included. - If BurnInTest is started with the -p command line parameter (to use the bit.exe directory for files such as the configuration file), then BurnInTest will start rebooter with the -p option. This can be useful when running BurnInTest and Rebooter from a USB drive. Release 5.3 build 1002 - Limited release WIN32 release 19 March 2007 - Corrected a bug introduced in V5.2 where selecting accumulated logging could lead to rebooter failing to launch. Release 5.3 build 1001 - Limited release WIN32 release 16 March 2007 - The 3D test has been improved. The 3D ball test has been replaced with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been changed to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been added for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. Release 5.3 build 1001 - Limited release WIN32 release 16 March 2007 - The 3D test has been improved. The 3D ball test has been replaced with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been changed to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been added for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. - BurnInTest uses DirectX 9.0c. This version of BurnInTest uses a more recent version of the Microsoft DirectX Direct3D component, October 2006. BurnInTest has been modified to detect and install this component (file) if it does not exist. - A command line parameter -X has been added to skip the DirectX version checking on BurnInTest start-up. - With the recent introduction of multi-monitor support for the Video Playback test, it is now more likely that the system will run out of memory when running multiple video tests simultaneously, particularly when more memory intensive codecs are used. A specific Insufficient resources to complete test message has been added in this case, rather than the previous more generic unrecoverable error message. The video test have been changed to attempt recovery from this and the more generic unrecoverable error, by closing the current video and opening the next. The logging detail has been increased. - Note: The BurnIntest sample video pack has been altered with the DivX Compressed Video file being removed due to the DivX codec failing with this Video file when used with multiple simultaneous Video playbacks. Access Violation: 0x69756e65. See: http://www.passmark.com/download/bit_download.htm - The video description is now collected for a larger range of Vista systems. - Windows 98 and ME are no longer supported. Please see www.passmark.com for a link to an older version of BurnInTest that will support W98/ME. Release 5.3 build 1000 rev2 - Limited release WIN32 release 9 March 2007 - A command line parameter -P has been added to allow the BurnInTest directory to be used rather than the User's personal directory. This may be useful when running BurnInTest from a USB drive for example. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipped as they are unavailable for testing. - A change has been made to support Hmonitor temperature monitoring on Vista. - A number of undocumented command line parameters have been documented: -B: BurnInTest will generate additional Serial port test information when activity trace level 2 logging is set. -E [data]: Specifies the test data to use in the serial port test. -M: Automatically display the Machine ID Window when BurnInTest is started. -U: Force BurnInTest to set logging on at startup. Release 5.3 build 1000 - Limited release WIN32 release 8 March 2007 - Changed the 2D and Video playback tests to support multi-monitor testing. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipped as they are unavailable for testing. Release 5.2 build 1006 - Limited release WIN32 release 1 March 2007 - Corrected a bug where BurnInTest would fail to start on certain Vista systems. - Corrected a bug where some files where the full path was not specified would be incorrectly referenced in the Program Files directory, rather than the user personal directory. Release 5.2 build 1005 - Public release WIN32 release 21 February 2007 WIN64 release 21 February 2007 - Updated the Graphics card description for Windows Vista systems. - Updated the Advanced Network test to indicate that elevated administrator privileges are required when running on Vista. - Moved files from the Program files directory for the Advanced Network Test (BurnInTest, EndPoint and CheckEnd). Specifically, the User Application directory is now used for the temporary test FTP files and the User Personal directory is now used for the log and configuration files. - Updated the cleanup process for when running the "zip" version of BurnInTest Professional from a CD or flash drive. - Updated the help link from the Windows Start, All Programs, BurnInTest menu for the browser based help. - Corrected a bug where Disk preferences displayed in the Preferences window would be incorrect when the system had no Floppy drive. - Corrected a bug where the Advanced Network test might not have been displayed until after entering the Duty Cycle selection (ie. just chaning from the standard network test to the advanced test). - Corrected a USB bug in Beta 5.2.1003 where the test would not run if there where there insufficient USB loopback plugs attached to the system. - Included a new version of PassMark Rebooter that supports Windows Vista. Release 5.2 build 1004 - Public Pre-release WIN32 release 13 February 2007 - Updated the reported Operating system for the various Vista product editions. - Disk test settings can be configured for "Automatically Select all Hard Disks", rather than using defaults. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipped as they are unavailable for testing. - Corrected a bug where temperature information could be duplicated in the HTML report. - Corrected a bug certain 'save report' warning messages could be truncated. - Help file updated. Release 5.2 build 1003 - BETA RELEASE ONLY WIN32 release 23 January 2007 - Changed the USB preferences and test to more completely check for the PassMark USB Loopback plugs and ignore any device that is not a PassMark USB Loopback plug (due to reported incorrect detection with another hardware device). - Increased Trace level debugging for Intel temperature monitoring. - Corrected a bug with the disk test introduced in 5.2.1001 Release 5.2 build 1002 - BETA RELEASE ONLY WIN32 release 22 January 2007 - Increased the number of disks that can be tested from 20 to 26. - Updated BurnInTest to reflect that Temperature monitoring with Intel Desktop utilities is supported. Intel Desktop utilities essentially is a replacement for Intel Active Monitor for newer Intel motherboards. - Increased Trace level debugging for Intel temperature monitoring. Release 5.2 build 1001 - BETA RELEASE ONLY WIN32 release 19 January 2007 - Windows Vista support. - The Block size used in the disk test is now configurable per disk. The default block size has been increased from 16KB to 32KB. - An option has been added to automatically detect all of the CD and DVD drives for the CD test (as per the disk test). This may be useful when testing across many systems with different optical drive configurations. - Increased Trace level debugging for Intel temperature monitoring. - Bugs corrected: - Disk preferences - in rare cases invalid default values could be set for a disk, an invalid value error would occur and the values would need to be manually corrected. Release 5.2 build 1000 - limited release WIN32 release 8 January 2007 - Windows Vista support. - Reduced the need for elevated administrator privileges: - Changed the location of the disk test files from the root directory of the test volume to a BurnInTest data files subdirectory (e.g from "C:\" to "C:\BurnInTest test files\") - Moved many of the files from the Program Files directory to the User directory for Windows 2000, XP and Vista. When running BurnInTest on Windows 98, ME or from a key.dat file (e.g. from a USB drive with a licensed key.dat) BurnInTest will store these files in the BurnInTest program directory. Specifically, the following files have been moved from the Program Files directory to the User Personal directory, e.g. Vista - "C:\Users\\Documents\PassMark\BurnInTest\" XP - "My Documents\PassMark\BurnInTest\" Files: Configuration file, Configuration load/save default directory, Save log file and image default directory, parallel port override "ioports.dat" directory, default command line script directory, log file directory, video file directory, Plugin directory, machine id file directory, Run as script default directory, CD burn image, Advanced network FTP temp files. - Replaced the Help system with Browser based help. - Changed the Disk test block size from 16KB to 256KB. It is planned to make this user configurable in the next build. Release 5.1 build 1014 WIN32 release 2 November 2006 WIN64 release 2 November 2006 - Corrected a bug when running on Vista, where the Standard network test would report a checksum error when the transmitted data was correct. - Corrected a bug where BurnInTest would not stop the tests based on the number of test cycles for the Plugin test or the Advanced Network test. - Made the "Could not set USB2Test mode" USB error message more specific by adding an error for insufficient system resources. - Changed the preferences Window to fit on an 800x600 resolution screen. - Corrected a minor bug in Activity level 2 trace logging with the 'hide duplicate' preference setting. - Corrected a minor memory leak if the 2D test failed to initialize (such as due to a DirectX problem). - The Parallel port test may now be used on Windows Vista. Specifically, the PassMark device driver used for the parallel port test could not be loaded on 64-bit Windows Vista as it was not digitally signed. It is now digitally signed. Release 5.1 build 1013 revision 0002 WIN32 release 19 September 2006 WIN64 release 19 September 2006 - Corrected an Access Violation problem reported by a customer on a particular MB. Release 5.1 build 1013 WIN32 release 7 September 2006 WIN64 release 7 September 2006 - The "Notes" section has been added to the Customer results certificate. - Some additional configuration range validation has been added. Release 5.1 build 1012 WIN32 release 15 August 2006 - Corrected a false report of a "Unable to get disk volume extent information" for the disk butterfly seek test. - Advanced Network test changes for errors: "Corrupt header - packet discarded" and "Advanced Network test timed out" - Advanced Network test Endpoint changes for problems on non-English Operating Systems and systems with the Windows "Network Interface" performance statistics disabled. - SMART parameters on a Samsung Hard Disk caused BurnInTest to fail when running the disk test with SMART thresholds enabled. This has been corrected. - The 2D scrolling H's test could display corrupt characters on the second and subsequent test run. This has been corrected. - A problem with the Integer maths test where the results could display a negative number of operations has been resolved. - Minor improvements to the help file. - HTML help file added for Windows Vista and Longhorn Server. - Minor improvements to the Error Classification file (error descriptions). - Some CD Trace level 1 logging has been moved to trace level 2. - Trace level 1 logging has been added to the test closing software. - New build of Endpoint.exe (1.0 1010). Release 5.1 build 1011 WIN32 release 6 July 2006 - New Advanced Network test error reporting added in the previous build V5.1 1010 has been removed. - A broader range of USB 2.0 Loopback plugs can now be used with BurnInTest. Release 5.1 build 1010 WIN32 release 4 July 2006 - Corrected the HTML report description of the L2/L3 CPU cache when the L3 cache size could not be determined. Advanced network changes: - Endpoints ran at 100% CPU load as they contained no throttling. This impacted their ability to effectively handle multiple threads handling TCP/UDP messaging. Throttling has been added to the EndPoint side to reduce CPU load. This does not greatly impact Network load. - Throttling on the BurnInTest side contained a sleep that was not insignificant. This could have impacted the BurnInTest data test thread to to handle incoming TCP and particularly UDP messages. This sleep has been reduced and other throttling parameters changed to suit. (ie. smaller sleeps more often). - EndPoint systems with x NICs (where x > 1), reported themselves as an Endpoint with x NICs, x times. Effectively registering with BurnInTest as x * x EndPoint NICS. This impacted the effectiveness of the load distribution to EndPoint NICs. An Endpoint system now only registers the once with BurnInTest. - The BurnInTest side did not report data verification Checksum errors for full duplex testing. This error determination has been corrected and reporting added. - The Test statistics sent from the Endpoint to BurnInTest could fail if the statistics block is split across 2 lower level TCP send packets. This could lead to problems like incorrect reporting of Endpoint determined checksum errors, Endpoint load and load balancing. Further it would lead to an Endpoint testthread being put into an endless TCP send loop. This would eventually bring the Endpoint system to its knees as more and more of these test threads go into this state. This has been corrected. - The Data Received reported by BurnInTest was double counted. This has been corrected. Release 5.1 build 1009 WIN32 release 23 June 2006 - Plugin test error classifications were incorrect in the log file detailed description. - Corrections to the advanced network test (BurnInTest and EndPoint). Release 5.1 build 1008 - limited release WIN32 release 20 June 2006 - Advanced network changes corrections. Most notably, a bug where part of the payload data could be lost if the payload block (eg. 1000 bytes) was split across 2 (or more) lower level TCP packets. - Added version reporting for Endpoints. Release 5.1 build 1007 - limited release WIN32 release 16 June 2006 Advanced network changes: - Corrected a BurnInTest access Violation introduced in V5.1 1006. - The Endpoint now reports its version and build to BurnInTest and BurnInTest reports this in the log file if it is an earlier version than expected. This is to help avoid the situation where old Endpoints are run on the Network, that may not be compatible with the version of BurnInTest being run by the user. - Removed a timeout report in a specific instance where a timeout is not an error. - Changed the Endpoint rebalancing and polling to occur less often after the test has been running 3 minutes. This is to help allowing the handling of polling from a larger number of multiple copies of BurnInTest on the Network. - Added a connection retries on failure for the Endpoint. - Corrected a memory leak in the Endpoint. - Increased the number of sockets supported. - Corrected some Advanced Network error classifications. Release 5.1 build 1006 - limited release WIN32 release 14 June 2006 - Improvements to the Advanced Network test (both BurnInTest V5.1 1006 and EndPoint V1.0 1004) to remove corrupted false packet corruption errors. Improved the timeout recovery mechanism. Added some validation to the Windows Network performance data used for NIC utilization. - Changes to the collection of Disk drive information on startup to try to resolve a startup issue on Systems with a large number of physical drives and 'unusual' WMI namings. Release 5.1 build 1005 WIN32 release 2 June 2006 - Corrected a bug in the Advanced network test where the test would not recover from timeout errors. The test appears to be running, but the results are 0 and the number of connected End Points are 0. Also improved the retry on timeout mechanism. - Removed some duplication in error reporting in the Advanced Network test. - Changed the Advanced Network display of Utilization to ensure a maximum of 100% displayed. - Corrected an Advanced Network test bug where the number of Errors reported in the test window would not take into account the corrupt packet threshold, and an error would be added for each occurrence of the corrupt packet (rather than when the user set threshold was reached). Release 5.1 build 1004b WIN32 release 25 May 2006 (not publicly released) - Corrected the default Advanced network corrupt packet threshold value. - Updated the data entry fields in the CD preferences when a different CD drive is selected. - The Advanced Network specific log files should be concatenated for a script run. This was only occurring for the first NIC under test. The concatenation will now occur for each NIC under test, when run from a script. - Corrected a bug where a log file name specified with no directory path could be incorrect. - Corrected a bug where the customer "Test Certificate" report incorrectly translated the "%" character from a customer specific HTML template. eg would be translated to . - The "Advanced Network test error" (215) has been removed and replaced with other existing error messages 214, 219, 220, 221 or 222. - Added the Customer name and Technician name to the text and HTMl reports. Previously, this information was only included in the "Test Certificate" report. - We have added a commandline option to specify the Serial port test data as a constant value. To specify specific data for the Serial port test you should specify e.g. "bit.exe /E 23" from the command line where 23 is in decimal and will be used for all test data (instead of random data). The vales should be between 0 and 255. Release 5.1 build 1004 WIN32 release 19 April 2006 (not publicly released) - Added the COM port speed of 921600 Kbits/s for RS 422/RS485 testing. - Changed the CD test to ensure that the entire test CD data is not cached on systems with a large amount of RAM. - Added a -M command line option to display the Machine ID window automatically when BurninTest starts. - Changed the 2D EMC scrolling H's test to work on multiple monitors were the resolution on each is different. - Changed log files such the syntax "..\" could be used for files in the directory up a level. - Minor correction to the advanced network test. Release 5.1 build 1003 WIN32 release 18 April 2006 WIN64 release 18 April 2006 - Changed the Advanced network test to allow a corrupt packet threshold value up to 1 million. - Bundled a new version of rebooter. Release 5.1 build 1002 WIN32 release 11 April 2006 WIN64 release 11 April 2006 - Corrections to the translation of V4.0 to V5 configuration files. Note: Configuration files in V5.x builds prior to V5.1 1002 could become corrupted if a V4.0 configuration file is loaded. - Corrected a bug where the main Window size and location were not restored on restarting BurnInTest. - Changes to the SMART attribute logging to support a greater range of Disk drive device drivers. Added additional Activity Level 2 trace logging. - Added an option to use CTS (Clear To Send) flow control in the loop back stage of the COM port test. - Corrected a bug where the CPU L3 cache could be reported as -1. - Help file updates. Release 5.1 build 1001 WIN32 release 30/March/2006 - Digitally signed the BurnInTest application to allow it to run under Windows Server "Longhorn". Note, previously only the installation package was digitally signed. - Updated the reported Operating system descriptions, including: - Windows Vista - Windows Server "Longhorn" - Corrected a bug where the Advanced network information was not displayed on the main window when it was run from a script. - The Advanced Network Corrupt threshold packet has been changed to produce an error every time the error is received after the threshold is reached. - Corrected the reporting of "Network, Packet discarded due to corrupt header" as a Network test error. - Corrected a bug where a new log file was not created if (only) the log prefix changed during the running of a script file. - Split the "Network, Advanced Network test error" error into 6 errors: "Network, Advanced Network test error" "Advanced Network Socket error" "Advanced Network Send error" "Advanced Network Send error - no data sent" "Advanced Network Receive error" "Advanced Network Receive error - no data received" Added either activity trace 1 or trace 2 logging for each of the errors, with additional information where available. - Added additional Serial port activity trace 2 logging. Including the logging of all transmit buffer data when the /B command line is used. Release 5.1 build 1000 WIN32 release 27/March/2006 (not a public release) Added the following features: - Create the log file directory specified in the Logging Options if it does not exist. - Condense the Advanced Network Test log files to one log file per IP address per script run, when run from a script. - Added an option to summarize duplicate errors in the log file. - Color coded errors based on severity in the Detailed event log Window and the HTML log file. - Added an option to only create a log file when BurnIn actually runs a test as opposed to every time BurnIn is executed. - Added a warning if a test thread completes with 0 cycles and 0 operations. - In the results summary html file, inserted more spacing between the 揘otes? and 揇etailed Event Log? - Changed the Activity Trace file format to be the same as the log file, ie. text or HTML, rather than always text. - The 2D 揝crolling H抯?test will now display across multiple screens/displays ?i.e. all active displays. - A threshold has been added for the 揷orrupt header ?packet discarded?event in the advanced network options so that a 揊ail?is not produced when that is the only thing that produces errors. - Added looping capability in scripting. LOOP n { ? } where n is the number of times to repeat the commands in the brackets. - Corrected a bug where PASS could be displayed if the Advanced Network test was the only test running, but it failed. Release 5.0 build 1001 WIN32 release 9/March/2006 - Corrected a bug where Network directory paths were not accepted, eg. for the log file name and post test application file name. - The CPU maths test has been improved to better load up all CPU's. Previously BurnInTest started a maths test thread per physical CPU package. BurnInTest has been changed to start a maths test thread per CPU (= num. physical CPU packages x num. CPU cores x num. logical CPUs). - The CPU preferences have been changed to allow the CPU maths test to be locked to any CPU (ie. select a CPU from a list of CPU's where the number of CPU's = num. physical CPU packages x num. CPU cores x num. logical CPUs). - The Parallel and Serial port error message have been modified in the case where a test plug may not have been connected to indicate that the user should check this. - Corrected a bug where a licenced version could display the message "[limited evaluation version]" Release 5.0 build 1000 WIN32 release 24/February/2006 WIN64 release 24/February/2006 NEW TESTS & IMPROVEMENTS TO EXISTING TESTS BurnInTest Standard and Professional versions. - Added a customer style results certificate. This will save the log file in HTML format but from the perspective of a end customer. This report style can be tailored by the user (through changing an HTML template). - An MP3 playback test has been added to the Sound test. - A color printer test has been added. - A new post test option to allow the results to be printed automatically at the end of a test has been added. - Added new Post-test action options of: - Optionally allow the user to "run an external program & exit" after BIT has been manually stopped. Modify the $RESULT variable to "PASS (manual abort)" or "FAIL (manual abort)" for this case. - Allow the results window to be displayed for all post test options (except Reboot). - Added new Pre-test actions to allow an external application to be run and have BIT wait for the application to exit. On continuing, BIT will run the subscript file (of scripting commands) if it has been created. - Changed the manual Stop buttons, to abort the running of a script (rather than just the current test). BurnInTest Professional specific. - Added a "Plugin" test that allows users to develop their own BurnInTest test modules for specialized hardware. Three external plugins may be specified at once. - A Modem test has been added to BurnInTest as a Plugin. PassMark's ModemTest Version V1.3 (latest build) is required. - A KeyBoard Test has been added to BurnInTest as a Plugin. PassMark's KeyboardTest Version V2.2 (latest build) is required. - A Firewire Test has been added to BurnInTest as a Plugin. PassMark's free Firewire plugin is required and a "Kanguru FireFlash" drive is required. - A new advanced network test has been added. BurnInTest Professional only. - The Memory test now allows the user to specify the type of test pattern to be used. - Testing with the USB 2.0 Loopback plug has been improved. When used with USB 2.0 Loopback device driver V2.0.1002, error details will now be reported for: CRC error reported by USB Host controller BIT STUFF error reported by USB Host controller DATA TOGGLE MISMATCH error reported by USB Host controller STALL PID error reported by USB Host controller DEVICE NOT RESPONDING error reported by USB Host controller PID CHECK FAILURE error reported by USB Host controller UNEXPECTED PID error reported by USB Host controller DATA OVERRUN error reported by USB Host controller DATA UNDERRUN error reported by USB Host controller BUFFER OVERRUN error reported by USB Host controller BUFFER UNDERRUN error reported by USB Host controller NOT ACCESSED error reported by USB Host controller FIFO error reported by USB Host controller TRANSACTION (XACT) ERROR reported by USB Host controller BABBLE DETECTED error reported by USB Host controller DATA BUFFER ERROR reported by USB Host controller In the case of these errors, BurnInTest will re-attempt the operation. The user can set the Error reporting to be skipped for the initial recovery attempt. IMPROVEMENTS TO TESTING FACILITIES - Added a disk autoconfig, such that when tests are started, the disk drives and settings will be defaults to all disks (exc. CD/DVD). This may be useful when testing multiple systems with different hard disk drive letters. - Store the position of the Main window on exiting BurnInTest. On starting BurnInTest, position the main window as saved; on starting tests, position the test windows as saved. - Allow a "drag & drop" of the Configuration file directly on the BurnInTest program icon. - Allow testing 99.5% to 100% of disk, instead of 94%, for disks that do not contain the Windows directory and do not contain a swap file. - Added the ability to log interim results, which may be useful for unstable systems. - AMD and Intel Dual core reporting added. - New L2 CPU cache sizes added to reports. - CPU support for SSE3, DEP and PAE added to reports. - Shortcut of "F1" for contextual help added to all Windows. - Improve the flexibility in specifying the EXECUTEWAIT scripting command for sleeper. - Updated logging header information with the hard and optical drive model. - The 2D and 3D tests have been updated to use DirectX 9.0c. - User interface updated. - The HTML report format has been improved. - The BurnInTest configuration file extension has been renamed from .cfg to use .bitcfg, to ensure the configuration file is associated with BurnInTest. - An error message indicating that accumulated log files are not supported when run from CD or DVD has been added. - To allow smaller test files with very large disks, the minimum disk test file size has been reduced from 0.1% to 0.01% of the disk space. - Log events were previously shown as "INFORMATION" if they were low level errors, or simply additional information (not errors). "INFORMATION" now refers to a low level error, and "LOG NOTE" now refers to additional information (that is not in the error count). - Improved the specific detail of the Serial Port errors detected. BurnInTest now reports framing errors, buffer overrun errors, input buffer overflow errors, parity errors and Transmit buffer full errors as specific error messages (rather than a broader error description). - Added the /k command line so the user can specify not to delete HDD test files if an error occurs. - Increased Activity trace level 1 error logging for Serial port testing. - Increased Activity trace level 1 error logging for Hyper threading detection. - Bundled a new version of the Rebooter program. - Improved the Serial port error logging (displaying baud rate) and increased Activity trace level 1 error logging (displaying erroneous data). - Modified the Window sizes to help improve navigation on smaller displays (i.e. 640x480). - The CPU load for the Standard and Torture RAM tests has been made more linear with the duty cycle setting. Note: This means that compared to the previous build of BurnInTest, less RAM test operations will be run per second (when the duty cycle is less than 100). - Additional debug code and very minor changes in the Loopback sound test. - The Post test option of "Run external application and exit" has been modified such that if no external file is specified, this Post test option will just exit BurnInTest. - Allowed the full range of PassMark USB1 loopback plugs to be used with BurnInTest Professional. - Added additional Activity Trace level 2 logging. - The delay inserted between packets in the USB2 test, when the duty cycle is less than 50, has been changed from at least 1ms to at least 1ms to 50ms (for a Duty Cycle of 49 down to 0). - The subscript commands to configure BurnInTest from an external application (i.e. specified in the bit-script-input.txt file and run by specifying either a pre-test or EXECUTEWAIT application) has been changed to allow "LOAD" commands (in addition to "SET" scripting commands). - Renamed the "Error" log to "Event" log. - Changed the order of the items in an Event log line, such that the Severity is the first item. - The EXECUTEWAIT script command has been modified such that the external application may provide an input script file (of SET... commands) to be run after the EXECUTEWAIT application closes. This allows external applications to define test environment parameters (such as the serial number and machine type). - Added scripting commands: SETSERIAL "1234-shdfgdhs-GHGHG" SETMACHINETYPE "HP XPS800" SETNOTES "Test notes defined by the external application." SETLOG "\Program Files\Plugin\plugin_log" SETPLUGIN "\Program Files\Plugin\plugin.exe" - Added POST TEST application parameter substitution to allow values to be passed to an external application at the end of a test. These are: $RESULT - "PASS" or "FAIL" will be substituted. $SERIAL - The serial number will be substituted. $MACHINETYPE - The machine type will be substituted. $NOTES - The notes will be substituted. - Added extra logging for memory allocation errors in the disk test - Added "log bad sector increase" and "bad sector threshold" options to disk test. This resulted in a change to the configuration file format and required additional code to automatically convert from old formats. - Modified the user interface in the preferences window for the disk test and the CD test - Improved the handling of USB 2.0 loopback plugs recovery from sleep states. BUG CORRECTIONS - Corrected a bug where the System and Application events logged in the BurnInTest Trace logs were wrong if the event log had reached its maximum size. - Checks that the Sound test files (WAV and MIDI) exist have been added. - The continuous auto updating of the USB image (USB Loopback plug vs. USB 2.0 Loopback plug) on the main window has been removed. This is now updated on BIT startup, selecting Refresh in USB preferences or on starting a test. If there is a serious USB problem, this (together with the USB 2.0 Loopback device driver, V2.0.1002) will avoid the possibility of BurnInTest locking up. - Corrected a bug with the Butterfly seek mode of the Disk test. This was found to occur with FAT32 disks where the Cylinder size was relatively small and the Sector size relatively large. - Reset Defaults on the Configuration Page now resets the Auto Stop Value. - Reset Defaults on the Configuration Page now resets the color indicators. - The CD test has been modified to skip invalid files either with "?"'s , to avoid reporting errors that are due to the CD test media filenames. - The Network test results window scroll bar has been corrected. - The Memory torture test could fail on some systems with a small amount of RAM and relatively high memory fragmentation. This has been corrected. - Scripting correction for .cmd files. - Corrected a bug that caused problems when running the disk test with SMART monitoring turned on. This problem only occurs on a small number of HDD's. - Corrected memory leaks - On occasion, the measured waveform from the loopback sound test may have been slightly altered on starting or stopping all tests, possibly enough to trigger an error. This has been resolved. - If an error occurred in the final second of a test, the error may have been logged but not included in the big PASS/FAIL results window. This has been corrected. - After running a script file that loaded a configuration file, that had a full path specified, the Save and Load configuration menu options no longer worked. This has been corrected. - Previously, the Version of BurnInTest was only written in the First log file after starting BurnInTest. This log line is now written in all log files. - For USB2 tests that have read or write failures, the Windows error codes are now included in the level 2 Activity trace log. - Command line parameters may now be passed to a PreTest application. - Log files may now use a single static filename. This may be useful when the log file is to be parsed by an external program. - Corrected a bug where the Plugin test would stop prematurely. - Corrected the specification of the Scripting EXECUTEWAIT filename. - Changed Script processing such that a script is aborted if a scripting error is encountered and Stop on error is selected. - Added an indication on the main window that a script is currently running ("Script currently running"). - Corrected the serial port test to identify non-existing plugs when the Disable RTS/CTS and DSR/DTR testing has been selected. - Corrected the display of strange results (666666) reported by a user, related to copy protection. - Fixed a memory leak bug in the MBM interface which caused memory allocation errors. - Added BIT version number to the ASCII log file. - Fixed a bug with the 3D Test that was causing it to stop before the autostop timer period - Changed an error in the tape drive test to a warning if tape drive doesn't support setting drive parameters. History of earlier releases: Please see http://passmark.com/products/bit_history.htm Documentation ============= All the documentation is included in the help file. It can be accessed from the help menu. There is also a PDF format Users guide available for download from the PassMark web site. Support ======= For technical support, questions, suggestions, please check the help file for our email address or visit our web page at http://www.passmark.com Ordering / Registration ======================= All the details are in the help file documentation or you can visit our sales information page http://www.passmark.com/sales Compatibility issues with the Network & Parallel Port Tests =========================================================== If you are running Windows 2000 or XP, you need to have administrator privileges to run this test. Enjoy.. The PassMark Development team
EurekaLog_7.5.0.0_Enterprise
EurekaLog 7.5 (18-August-2016) 1)..Important: Installation layout was changed. All packages now have version suffix (e.g. EurekaLogCore240.bpl). No files are copied to \bin folder of IDE. Run-time package (EurekaLogCore) is copied to Windows\System32 folder. Refer to help for more info. 2)....Added: RAD Studio 10.1 Berlin support 3)....Added: IDE F1 help integration (on CHM-based IDEs only, i.e. XE8+) 4)....Added "--el_injectjcl", "--el_createjcl", and "--el_createdbg" command-line options for ecc32/emake to inject JEDI/JCL debug info, create .jdbg file, and create .dbg file (Microsoft debug format). Later is supported when map2dbg.exe tool is placed in \Bin folder of EurekaLog installation (separate download is required) 5)....Added: Exception2HRESULT in EAppDLL to simplify developing DLLs with "DLL" profile 6)....Added: Use ShellExecute option for mailto send method 7)....Added: "Mandatory e-mail only when sending" option 8)....Added: Exception line highlighting in disassember view in EurekaLog exception dialog and Viewer 9)....Added: Detection/logging Delphi objects in disassembly view 10)..Added: Support for multi-monitor info 11)..Added: Support for detection of Windows 10 updates 12)..Added: OS edition detection 13)..Added: "User" and "Session" columns to processes list, processes list is also sorted by session first 14)..Added: Support for showing current user processes only 15)..Added: Expanding environment variables for "Support URL" 16)..Fixed: Range-check error on systems with MBCS ACP 17)..Fixed: 64-bit shared memory manager may not work 18)..Fixed: Possible "Unit XYZ was compiled with a different version of ABC" when using packages 19)..Fixed: FastMM shared MM compatibility 20)..Fixed: Minor bugs in stack tracing (which usually affected stacks for leaks) 21)..Fixed: Rare deadlocks in multi-threaded applications 22)..Fixed: Taking screenshot of minimized window 23)..Fixed: NT service may not log all exceptions 24)..Fixed: SSL port number for Bugzilla 25)..Fixed: Disabling "Activate Exception Filters" option was ignored 26)..Fixed: Missing FTP proxy settings 27)..Fixed: IntraWeb support is updated up to 14.0.64 28)..Fixed: Retrieving some process paths in processes list 29)..Fixed: CPU view rendering in EurekaLog exception dialog and Viewer 30)..Fixed: Some issues in naming threads 31)..Fixed: Removed exported helper _462EE689226340EAA982C5E8307B3F9E function (replaced with mapped file) 32)..Changed: Descriptions of EurekaLog project options now list corresponding property names of TEurekaModuleOptions class. 33)..Changed: Default template of HTML/web dialog now includes call stack by default 34)..Changed: EurekaLog 7 now can be installed over EurekaLog 6 automatically, with no additional actions/tools EurekaLog 7.4 (7.4.0.0), 26-January-2016 1)....Fixed: Performance issue in DLL exports debug information provider 2)....Fixed: Range-check error in Send dialog 3)....Fixed: Possible FPU control word unexpected change 4)....Fixed: JIRA sending to project with no version info 5)....Fixed: Viewer sorting affected by local region settings 6)....Fixed: Exception filters ignore settings for restart/terminate EurekaLog 7.3 Hotfix 2 (7.3.2.0), 20-October-2015 1)....Fixed: Added workaround for codegen bug in Delphi 7 (possibly - other), bug manifests itself as wrong date-time in reports or integer overflows 2)....Fixed: Some MAPI DLLs may not be loaded correctly 3)....Fixed: Handling SEC_I_INCOMPLETE_CREDENTIALS in SSPI code (added searching client certificate) 4)....Fixed: Range-check error when closing WinAPI dialog EurekaLog 7.3 Hotfix 1 (7.3.1.0), 2-October-2015 1)....Fixed: Long startup time on terminal services servers EurekaLog 7.3 (7.3.0.0), 24-September-2015 1)....Added: RAD Studio 10 Seattle support 2)....Added: Performance counters for run-time (internal logging with --el_debug) 3)....Fixed: spawned by ecc32/emake processes now start with the same priority 4)....Fixed: ThreadID = 0 in StandardEurekaNotify 5)....Fixed: Dialog auto-close timer may reset without user input 6)....Fixed: Possible hang when quickly loading/unloading EurekaLog-enabled DLL 7)....Fixed: Possible hang in COM DLLs 8)....Fixed: Removed some unnecessary file system access on startup 9)....Fixed: Possible wrong font size in EurekaLog tools 10)..Fixed: Ignore timeouts from Shell_NotifyIcon 11)..Fixed: Possible failure to handle/process stack overflow exceptions 12)..Changed: VCL/CLX/FMX now will assign Application.OnException handler when low-level hooks are disabled EurekaLog 7.2 Hotfix 6 (7.2.6.0), 14-July-2015 1)....Added: csoCaptureDelphiExceptions option 2)....Fixed: Handling of SECBUFFER_EXTRA in SSPI code 3)....Fixed: Several crashes in sending code for very old Delphi versions 4)....Fixed: Regression (from hotfix 5) crash in some IDEs EurekaLog 7.2 Hotfix 5 (7.2.5.0), 1-July-2015 1)....Added: HKCU\Software\EurekaLab\Viewer\4.0\UI\Statuses registry key to allow status customizations in Viewer 2)....Added: "Disable hang detection under debugger" option 3)....Fixed: Wrong button caption in standalone "Steps to reproduce" dialog 4)....Fixed: Wrong passing of Boolean parameters in JSON (affects JIRA) 5)....Fixed: Wrong sorting of BugID, Count and DateTime columns in Viewer 6)....Fixed: Empty "Count" field/column is now displayed as "1" in Viewer 7)....Fixed: Generic names with "," could not be decoded in Viewer 8)....Fixed: Updated Windows 10 detection for latest builds of Windows 10 9)....Fixed: Sleep and hybernation no longer trigger false-positive "application freeze" 10)..Fixed: Wrong function codes for hooking (affects ISAPI application type) 11)..Fixed: Wrong button caption in "Steps to Reproduce" dialog 12)..Fixed: Crash when taking snapshot of some proccesses by Threads Snapshot tool 13)..Fixed: Minor improvements in leak detection EurekaLog 7.2 Hotfix 4 (7.2.4.0), 10-June-2015 1)....Added "ECC32TradeSpeedForMemory" option - defaults to 0/False, could be changed to 1 via Custom/Manual tab. This option will switch from fast-methods to slower methods, but which take less memory. Use 0 (default) for small projects, use 1 for large projects (if ecc32 runs out of memory). 2)....Added: --el_DisableDebuggerPresent command-line option for compatibility with 3rd party debuggers (AQTime, etc.) 3)....Added: AQTime auto-detect 4)....Fixed: Performance optimizations 5)....Fixed: Windows 8+ App Menu shortcuts 6)....Fixed: Unmangling on x64 EurekaLog 7.2 Hotfix 3 (7.2.3.0), 20-May-2015 1)....Added: Support for token auth in Bugzilla (latest 4.x builds) 2)....Added: Support for API key auth in Bugzilla (5.x) 3)....Added: Support for /EL_DisableMemoryFilter command-line option 4)....Added: Asking e-mail when user switches to "details" from MS Classic without entering e-mail 5)....Fixed: Compatibility issues with older Bugzilla versions (3.x) 6)....Fixed: Passing settings between dialogs 7)....Fixed: "Ask for steps to reproduce" dialog is now DPI-aware 8)....Fixed: Silently ignore and fix invalid values in project options EurekaLog 7.2 Hotfix 2 (7.2.2.0), 30-April-2015 1)....Fixed: Confusing message in Manage tool when using with Trial/Pro 2)....Fixed: Range check error in processes information for x64 machines (affects startup of any EurekaLog-enabled module) 3)....Fixed: Auto-detect personality by project extension if --el_mode switch is missing 4)....Fixed: More details for diagnostic sending 5)....Fixed: Wrong settings for MAP files in C++ Builder 6)....Fixed: Wrong code page was used to decode ANSI bug reports 7)....Fixed: Attaching .PAS files instead of .OBJ in C++ Builder 2006+ Pro/Trial EurekaLog 7.2 Hotfix 1 (7.2.1.0), 3-April-2015 1)....Fixed: Wrong float-str convertion when ThousandSeparator is '.' EurekaLog 7.2 (7.2.0.0), 1-April-2015 1)....Important: TEurekaLogV7 component was renamed to TEurekaLogEvents. Please, update your projects by renaming or recreating the component 2)....Important: File layout was changed for BDS 2006+. Delphi and C++ Builder files are now located in StudioNum folders instead of old DelphiNum and CBuilderNum folders. Update your search paths if needed 3)....Added: Major improvements in DumpAllocationsToFile function (EMemLeaks unit) 4)....Added: MemLeaksSetParentBlock, MemLeaksOwn, EurekaTryGetMem functions (EMemLeaks unit) 5)....Added: Improvements for call stack of dynarrays/strings allocations (leaks) 6)....Added: "Elem size" when reporting leaks in dynarrays 7)....Added: Streaming unpacked debug info into temporal files instead of memory - this greatly reduces run-time application memory usage at cost of slightly slower exception processing. This also reduces memory footprint for ecc32/emake 8)....Added: Showing call stacks for 2 new types of fatal memory errors 9)....Added: EMemLeaks._ReserveOutOfMemory to control reserve size of out of memory errors (default is 50 Mb) 10)..Added: "MinLeaksLimitObjs" option (EMemLeaks unit) 11)..Added: Fatal memory problem now pauses all threads in application 12)..Added: Fatal memory problem now change thread name (to simplify debugging) 13)..Added: boPauseELThreads and boDoNotPauseELServiceThread options (currently not visible in UI) 14)..Added: Support for texts collections out of default path 15)..Added: Support for relative file paths to text collections and external settings 16)..Added: Support for environment variables in project option's paths 17)..Added: Support for relative file paths and environment variables for events and various module paths 18)..Added: Logging in Manage tool 19)..Added: Windows 10 version detection 20)..Added: Stack overflow tracing 21)..Added: Major improvements in removal of recursive areas from call stack 22)..Added: Statistics collection 23)..Added: Support for uploading multiple files in JIRA 24)..Added: EResLeaks improvements (new funcs: ResourceAdd, ResourceDelete, ResourceName; support for realloc-like functions) 25)..Fixed: Added workaround for bug in JIRA 5.x 26)..Fixed: Rare EurekaLog internal error 27)..Fixed: Ignored unhandled thread exceptions (when EurekaLog is disabled) now triggers default OS processing (WER) 28)..Fixed: Irnored exceptions (via per-exception/events) now bring up default RTL handler 29)..Fixed: Format error in Viewer 30)..Fixed: Leak of EurekaLog exception information object 31)..Fixed: Wrong chaining exceptions inside GetMem/FreeMem 32)..Fixed: Memory leak after low-level unhook of function 33)..Fixed: Re-parenting after ReallocMem 34)..Fixed: Editing SMTP server options 35)..Fixed: SMTP server not using real user e-mail in FROM field 36)..Fixed: Some multi-threading crashes 37)..Fixed: Fixed crashes in Manage tool 38)..Fixed: Range-check error in Viewer 39)..Fixed: EurekaLog error dialog appearing under other windows 40)..Fixed: AV when parsing TDS (emake/C++ Builder specific) 41)..Fixed: Unable to build call stacks for other threads due to insufficient rights 42)..Fixed: Version checks for BugZilla and JIRA 43)..Fixed: Not catching out-of-module AVs when "Capture exceptions only from current module" option is checked 44)..Fixed: Checking for remaining exceptions at shutdown (C++ Builder specific, AcquireExceptionObject returns wrong info) 45)..Fixed: "get call stack of ... threads" / "suspend ... threads" options (avoid rare multithreading race conditions) 46)..Fixed: Crash when naming thread without EurekaLog thread info 47)..Fixed: Detection of immediate caller for memory funcs 48)..Fixed: Non-working Assign for options 49)..Fixed: Handling of explicitly chained exceptions 50)..Fixed: Various exception/threading fixes for MS debug provider 51)..Fixed: Processing hardware unhandled exceptions (QC #55007) 52)..Fixed: Unchecking dialog options when export/import 53)..Fixed: BSTR leak 54)..Fixed: JIRA decimal separator bug 55)..Changed: Now unhandled exceptions will be handled by EurekaLog even if EurekaLog is disabled in the thread - only global EurekaLog-enabled status is respected 56)..Changed: Viewer version now matches version of EurekaLog 57)..Changed: DeleteServiceFilesOption now always False by default 58)..Changed: Speed improvements for known memory leaks (reserved leaks) 59)..Changed: Improved logging for sending 60)..Changed: Switching to detailed mode without entering (mandatory) e-mail: now EL will not block this 61)..Changed: .ToString for exception info now uses compact stack formatter 62)..Removed: Custom field editor (replaced it with link to "Custom" page) 63)..Removed: EurekaLog 7 no longer could be installed over EurekaLog 6. Manage tool from EurekaLog 7 will no longer work with EurekaLog 6. EurekaLog 7.1 update 1 (7.1.1.0), 19-October-2014 1)....Added: "Send in separated thread" option 2)....Added: Hang detection will now use Wait Chain Traversal (WCT) on Vista+ systems to detect deadlocks in any EurekaLog-enabled threads 3)....Added: OS install language and UI language fields in bug report 4)....Fixed: Viewer is not able to decrypt reports with generics 5)....Fixed: EVariantTypeCastError in Viewer when changing status of some bug reports 6)....Fixed: EcxInvalidDataControllerOperation in Viewer 7)....Fixed: Stack overflow at run-time for certain combination of project options 8)....Fixed: BMP re-draw bug in UI dialogs 9)....Fixed: Rogue "corrupted" error message for valid ZIPs of certain structure 10)..Fixed: Various range check errors in Viewer 11)..Fixed: Possible encoding errors for non-ASCII reports in Viewer on certain environments 12)..Fixed: Wrong count in Viewer when importing reports without proper "count" field 13)..Fixed: Duplicate reports may appear in bug report file when "Do not save duplicate errors" option is checked 14)..Fixed: False-positive detection of some virtual machines 15)..Fixed: Processing of exceptions from message handlers during message pumping cycle inside exception dialogs 16)..Fixed: Access Violation if exception dialog was terminated by exception 17)..Fixed: Hardware exceptions from unit's initialization/finalization may be unprocessed 18)..Changed: "VIEW" action for Viewer now will open ALL bug reports inside bug report file; reports will not be merged by BugID. "IMPORT" action remains the same: duplicate reports are merged, "count" is increased 19)..Changed: Charset field in bug report now shows both charset and code page EurekaLog 7.1 (7.1.0.00), 23-September-2014 1)....Added: XE7 support 2)....Added: XE6 support 3)....Added: New DLL demo 4)....Added: Custom profiles are now shown in "Application type" combo-box 5)....Added: Non-empty "steps to reproduce" will be added to existing bug tracker issues with empty "steps to reproduce" 6)....Added: Support for custom fields in FogBugz (API version 8 and above) 7)....Added: Support for unsequenced line numbers in PDB/DBG files (--el_source switch) 8)....Fixed: XML bug report were generated wrong 9)....Fixed: Strip relocations code for Win64 10)..Fixed: EurekaLog conditional symbols removed improperly when deactivating EurekaLog 11)..Fixed: Sending reports to non-default port numbers (affects web-based methods) 12)..Fixed: SSL validation check may reject valid SSL certificate (SMTP Client/Server) 13)..Fixed: SSL errors may be not reported 14)..Fixed: Viewer did not consider empty bug reports as corrupted 15)..Fixed: "DLL" profile now can be used with packages properly 16)..Fixed: Few rare memory leaks 17)..Fixed: Possible deadlock when using MS debug info provider 18)..Fixed: C++ Builder project files was saved incorrectly (RAD Studio 2007+) 19)..Fixed: "Show restart checkbox after N errors" counts handled exceptions 20)..Fixed: IDE expert's DPR parser (added support for multi-part idents) 21)..Fixed: Rare access violation in hook code 22)..Fixed: Thread handle leaks (added _NotifyThreadGone/_CleanupFinishedThreads functions to be called manually - only when low-level hooks are not installed) 23)..Fixed: EurekaLog's installer hang 24)..Fixed: Bug in object/class validation 25)..Fixed: Bug when using TThreadEx without EurekaLog 26)..Fixed: Leaks detection may not work with certain combination of options 27)..Fixed: Deadlock in some cases when using EurekaLog threading option set to "enabled in RTL threads, disabled in Windows threads". 28)..Changed: TEurekaExceptionInfo.CallStack will be nil until exception is actually raised 29)..Changed: FogBugz and BugZilla: changed bugs identification within project (to allow two bugs exists with same BugID in different projects) 30)..Changed: Blocked manual creation/destruction of ExceptionManager class and EurekaExceptionInfo 31)..Changed: ECC32/EMAKE runs from IDE without changing priority, added ECC32PriorityClass option 32)..Improved: Minor help and text improvements EurekaLog 7.0.07 Hotfix 2 (7.0.7.2), 11-December-2013 1)....Fixed: Delphi compiler code generation bug (Delphi 2007 and below) 2)....Fixed: Code hooks may rarely be set incorrectly (code stub relocation fails) 3)....Fixed: Win64 call stacks functions now work more similar to 32 bit call stacks EurekaLog 7.0.07 Hotfix 1 (7.0.7.1), 2-December-2013 1)....Added: Alternative caption for e-mail input control when e-mail is mandatory 2)....Fixed: Rare range check error in WinAPI visual dialogs 3)....Fixed: Wrong error detection for OnExceptionError event 4)....Fixed: Wrong TResponce processing 5)....Fixed: Problems with encrypted call stack decoding 6)....Fixed: OnPasswordRequest event may have no effect EurekaLog 7.0.07 (7.0.7.0), 25-November-2013 1)....Added: Ability to use Assign between call stack and TStrings 2)....Added: 64-bit disassembler 3)....Added: Support for variables and relative file paths in "Additional Files" send option 4)....Added: --el_source switch for ecc32/emake compilers 5)....Added: support for post-processing non-Embarcadero executables 6)....Added: EOTL.pas unit for better OmniThreadLibrary integration 7)....Added: RAD Studio XE5 support 8)....Added: New "Capture call stacks of EurekaLog-enabled threads" option 9)....Added: "Deferred call stacks" option for 64-bit 10)..Added: Copy report to clipboard now copies both report text and report file 11)..Added: "AttachBothXMLAndELReports" option to include both .elx and .el files into bug report 12)..Added: EMemLeaks.MemLeaksErrorsToIgnore option to exclude certain memory errors from being considered as fatal 13)..Added: Call stack with any encrypted entry will be fully encrypted now 14)..Added: Option to exclude certain memory errors from being considered as fatal (EMemLeaks.MemLeaksErrorsToIgnore) 15)..Added: New "HTTP Error Code" option for all web-based dialogs (CGI, ISAPI, etc.) 16)..Added: Support for Unicode in Simple MAPI send method (requires Windows 8 or latest Microsoft Office) 17)..Added: New value for call stack detalization option (show any addresses, including those not belonging to any executable module) 18)..Fixed: Wrong JSON escaping for strings (affects JIRA send method) 19)..Fixed: Range-check error in Viewer when viewing bug reports with high addresses 20)..Fixed: Selecting Win32 service application type is no longer resets to custom/unsupported 21)..Fixed: Possible hang when testing dialogs from EurekaLog project options dialog 22)..Fixed: Rare resetting of some options when saving .eof file 23)..Fixed: Exception pointer could be removed from call stack due to debug details filtering 24)..Fixed: Rare case when LastThreadException returned nil while there was active thread exception 25)..Fixed: Rare case when ShowLastThreadException do nothing 26)..Fixed: Improved compatibility for OmniThreadLibrary and AsyncCalls 27)..Fixed: Included fix for QC #72147 28)..Fixed: 64-bit MS Debug Info Provider (please, re-setup cache options using configuration dialog) 29)..Fixed: "Deferred call stacks" option failed to capture call stack when exception is re-raised between threads 30)..Fixed: "Deferred call stacks" option may produce cutted call stack in rare cases 31)..Fixed: Several minor call stacks improvements and optimizations 32)..Fixed: Several 64-bit Pointer Integer convertion issues 33)..Fixed: Multi-threading deadlock issue 34)..Fixed: Black screenshots in 64 bit applications 35)..Fixed: Copying to clipboard hot-key was registered globally 36)..Fixed: Shell (mailto) send method may fail (64 bit) 37)..Fixed: Possible wrong file paths for attaches in (S)MAPI send methods 38)..Fixed: Environment variables were not expanded in MAPI send method 39)..Fixed: (non-Unicode IDE) EurekaLog is not activated when application started from folder with Unicode characters 40)..Fixed: Encrypted call stacks may be encrypted partially by EurekaLog Viewer in rare cases 41)..Fixed: Crash when sending leak report with visual progress dialog (only some IDEs are affected) 42)..Fixed: ecc32/emake could not see external configuration file with the same name as project (e.g. Project1.eof for Project1.dpr) 43)..Fixed: Added missed RTL implementation for ExternalProps in Delphi 6 (affects Mantis sending) 44)..Fixed: IDE crash when switching to threads window 45)..Changed: Removed temporal solution which was used before option to defer call stack creation was introduced 46)..Changed: "Default EurekaLog state in new threads" option is changed from Boolean flag into enum. You need to re-setup this option 47)..Changed: Disable EurekaLog for thread when creating call stack or handle exception - this increases stability and performance 48)..Changed: LastException property is remove from exception manager as not thread safe. Use LastThreadException property instead 49)..Changed: Lock/Unlock from thread manager and exception manager are removed to avoid deadlocks 50)..Changed: ThreadsSnapshot tool now tries to capture call stack without injecting DLL 51)..Changed: Build events now runs with CREATE_NO_WINDOW flag (console window is hidden) 52)..Improved: More articles in help EurekaLog 7.0.06 (7.0.6.0), 1-June-2013 1)....Added: Experimental 64 bit C++ Builder support 2)....Added: New tab in EurekaLog project options: "External tools" 3)....Added: Option to catch all IDE errors (to debug your own IDE packages) 4)....Added: Option to catch only exceptions from current module 5)....Added: Option to defer building call stack 6)....Added: RAD Studio XE4 support 7)....Added: Support for AppWave 8)....Fixed: Fixed event handlers declarations for the EurekaLog component 9)....Fixed: Infinite recursive calls when using ToString from EndReport event handler 10)..Fixed: UPX compatibility issue 11)..Fixed: Range check errors for system error codes 12)..Fixed: Rare IDE stack overflow 13)..Fixed: JIRA unit was not added automatically 14)..Fixed: EurekaLog no longer tries to check for leaks when memory manager filter is disabled 15)..Fixed: Possible deadlock on shutdown with freeze checks active 16)..Fixed: Issues with settings dialog and Win32 Service application type 17)..Fixed: ThreadSnapshot tool was not able to take snapshots of Win64 processes 18)..Fixed: WCT is disabled for leaks 19)..Fixed: TContext declarations for Win64 20)..Fixed: Check for updates now correctly sets time of last check 21)..Fixed: (Win64) Several Pointer Integer convertion errors 22)..Fixed: Internal error when exception info object was deleted while it was still used by SysUtils exception object 23)..Fixed: Semeral problems with "EurekaLog look & feel" style for EurekaLog error dialog 24)..Fixed: Using text collection resets exception filters 25)..Fixed: Rare access violation if registering event handlers is placed too early 26)..Fixed: SMTP RFC date formatting 27)..Fixed: Rare empty call stack bug 28)..Fixed: Hang detection was not working if EurekaLog was disabled in threads 29)..Fixed: AV for double-free TEncoding 30)..Changed: ecc32/emake no longer alters arguments for dcc32/make unless new options --el_add_default_options is specified 31)..Changed: Save/load options methods was moved to TEurekaModuleOptions class 32)..Changed: Saving options to EOF file now adds hidden options and removes obsolete options (only when compatibility mode is off) 33)..Changed: Compiling installed packages now silently ignores EurekaLog instead of showing "File is in use" error message 34)..Improved: More readable disk/memory sizes in bug reports 35)..Improved: More descriptive settings dialog when using external configuration 36)..Improved: ThreadSnapshot tool now aquired DEBUG priviledge for taking snapshot. This allows it to bypass security access checks when opening target process. 37)..Improved: Changed BugID default generation to include error code for OS errors and error message for DB errors 38)..Improved: Mantis API (WSDL) was updated to the latest version (1.2.14) 39)..Improved: IntraWeb compatibility (old and new versions) 40)..Improved: COM applications compatibility 41)..Improved: Build events now accept shell commands 42)..Improved: More articles in help EurekaLog 7.0.05 (7.0.5.0), 7-February-2013 1)....Added: JIRA support 2)....Added: Virtual machine detection (new field in bug reports) 3)....Fixed: "Use Main Module options" option was loading empty options for some cases 4)....Fixed: Wrong record declarations for Simple MAPI on Win64 5)....Fixed: Performance issues with batch module options updating 6)....Fixed: Wrong leaks report with both MemLeaks/ResLeaks options active 7)....Fixed: Wrong info for nested exceptions in some cases 8)....Fixed: AV under debugger for Win64 (added support for _TExitDllException) 9)....Fixed: Wrong record declarations for process/thread info on Win64 10)..Fixed: Support for FinalBuilder on XE2/XE3 with spaces in file paths 11)..Fixed: Rare double-free of module information (ModuleInfoList) 12)..Fixed: Rare External Exception C000071C on shutdown (only under debuggger) 13)..Fixed: Added large addresses support in Viewer 14)..Fixed: Counter options in memory leaks category is now working properly 15)..Fixed: Rare range-check error in TEurekaModulesList.AddModuleFromFileName 16)..Fixed: FTP force directories dead lock 17)..Fixed: Fixed wrong index being used when clearing compatibility mode (EurekaLog project options dialog) 18)..Fixed: Default thread state do not affect main thread now 19)..Fixed: Sometimes wrong thread may be used when altering EurekaLog active state for external thread 20)..Fixed: Wrong DNS lookup on ANSI 21)..Fixed: Problems with IDE expert and projects on network paths 22)..Fixed: Added support for arguments in URLs (HTTP sending) 23)..Fixed: Possible deadlock in multithreaded applications 24)..Fixed: Problems with unicode characters in project files on non-Unicode IDEs 25)..Fixed: Infinite recursive calls when using ToString from EndReport event handler 26)..Fixed: Win64 GetCaller now returns pointer to call instruction, not return address 27)..Improved: Standalone Editor do not force save/load folder by default 28)..Improved: DLL profile now can use additional application type hooks automatically 29)..Improved: EurekaLog now able to work with read-only projects (see help for more info) EurekaLog 7.0.04 (7.0.4.0), 2-December-2012 1)....Added: Support for nested exceptions in DLLs 2)....Fixed: Options bug in EurekaLogSendEmail function 3)....Fixed: Weird behaviour for steps to reproduce and custom fields 4)....Fixed: Installation for single personality (BDS) 5)....Fixed: Range check error in EModules 6)....Fixed: Bug in exception destroy hook 7)....Fixed: OnExceptionNotify event is no longer called for handled exceptions without option checked 8)....Fixed: DEP checks on startup no longer cause exception 9)....Fixed: Invalid declaration for MS Debug API 10)..Fixed: OLE mode change error for "Test" send button 11)..Fixed: Fixes for multiply loading of the same DLL 12)..Fixed: Removed PNG compression from icons (tools) 13)..Fixed: Range-check error in dialogs with EurekaLog style enabled 14)..Fixed: Send progress dialog may keep busy forever processing window messages (message flood from rapid application GUI updates) 15)..Fixed: Thread pausing options now work correctly 16)..Improved: New features in exception filters - marking exceptions as "expected", filtering by properties (RTTI) 17)..Improved: Recovery from memory errors without debugging memory manager 18)..Improved: Viewer's password edit now hides password with asterisks 19)..Updated: Changed names of .inc files to avoid name conflicts with other libraries 20)..Updated: Help EurekaLog 7.0.03 (7.0.3.0), 6-October-2012 1)....Fixed: Removed some consts keywords for event handlers, so now C++ Builder can alter arguments (this change may require you to adjust your custom code) 2)....Fixed: Fallback code for false-positive results on memory probing 3)....Fixed: Range check errors in SSL/TLS implementation 4)....Fixed: "EurekaLog is not active" error message during send testing 5)....Fixed: Incorrect memory probing when DEP is off (old systems) 6)....Fixed: Installation of 64-bit BPLs 7)....Fixed: Dialog preview 8)....Fixed: Win64 fixes for XE3 9)....Fixed: Support for project groups (mixed project types) 10)..Fixed: Windows 2000 hooks compatibility 11)..Fixed: mailto double quotes escaping 12)..Fixed: Simple MAPI WOW compatibility 13)..Fixed: Simple MAPI modal issues 14)..Fixed: Various range check errors 15)..Changed: Removed minor version number from program group name 16)..Updated: Help EurekaLog 7.0.02 hot-fix 1 (7.0.2.1), 12-September-2012 1)....Fixed: Range check error in Viewer 2)....Fixed: Bug in hooking code EurekaLog 7.0.02 (7.0.2.0), 11-September-2012 1)....Added: Improved memory problems detection 2)....Added: Minor IDE Expert usability improvements 3)....Added: Auto-size feature for detailed error dialog 4)....Added: Workaround for QC #106935 5)....Added: Workaround for bug in InvokeRegistry (SOAP/Mantis) 6)....Fixed: Nested OS exceptions 7)....Fixed: Multiply Win64 fixes 8)....Fixed: Compatibility mode fixes 9)....Fixed: Altered behaviour of "Add BugID/Date/ComputerName" options 10)..Fixed: Blank screenshots 11)..Fixed: Check file for corruptions 12)..Fixed: Viewer is unable to decrypt certain bug reports 13)..Fixed: Internal DoNoTouch option now works for post-processing and condtionals 14)..Fixed: Possible out of memory error for "Do not store class/procedure names" option 15)..Fixed: EurekaLog did not properly install itself when there is only Delphi installed, but no C++ Builder of the same version (or visa versa) 16)..Fixed: Wrong argument for OnRaise event 17)..Fixed: Handling memory errors in initialization/finalization sections 18)..Fixed: Updating steps to reproduce and user e-mail in bug report 19)..Fixed: Proper Success/Failure for some errors during SMTP send 20)..Added: Workaround for wrong GUI fonts 21)..Added: Delphi XE3 support 22)..Added: Individual options for each exception EurekaLog 7.0.01 (7.0.1.0), 28-June-2012 1)....Added: New "Modal window" option (MS Classic and EurekaLog dialogs) 2)....Added: New "Owned window" option (MS Classic and EurekaLog dialogs) 3)....Added: New "Catch EurekaLog IDE Expert errors" option 4)....Added: Backup memory manager to recover from critical errors 5)....Added: Alternative methods to provide additional features when memory filter is not set 6)....Fixed: Contains fixes from hotfixes 1-3 7)....Fixed: Performance improvements 8)....Fixed: Improved IDE Expert's speed, stability and compatibility with other 3rd party extensions 9)....Fixed: MS Classic dialog size adjustments for large "click here" translations 10)..Fixed: Fixed resetting few EurekaLog project options to defaults 11)..Fixed: Multiplying exception filters when options are assigned (for example: when switching to/from "Custom" page in project options) 12)..Fixed: (Compatibility mode) Fixed send options merging 13)..Fixed: Updated help EurekaLog 7.0 hot-fix 3 (7.0.0.273), 20-June-2012 --------------------------- 1)....Fixed: ERangeError in EResLeaks (THandle Integer) 2)....Fixed: C++ Builder breakpoints for large projects 3)....Fixed: Help (updates policy changed) 4)....Fixed: Text collections applying 5)....Fixed: Build events are now called for unlocked file 6)....Fixed: Proper handling of C++ Builder project options files from Delphi code (settings editor and IDE expert) 7)....Fixed: Terminate/Checked sub-option for MS Classic dialog 8)....Fixed: Confusing message for already post-processed executables 9)....Fixed: Access violation for some EurekaLog IDE menu items when no project was loaded 10)..Fixed: Invoking help for "Variables" window 11)..Fixed: EurekaLog Viewer version info 12)..Fixed: Events in components 13)..Added: Retry option for "Sorry, you must close all running IDE instances before installation" 14)..Added: Italian translation 15)..Added: Actual change log is now included into installer 16)..Added: Even more setup logging 17)..Added: New help articles (recompilation and manual installation) EurekaLog 7.0 hot-fix 2 (7.0.0.261), 10-June-2012 --------------------------- 1)....Fixed: Wrong version info reporting to IDE 2)....Added: Workaround for Delphi 2005 TListView bug 3)....Added: Workaround for possible invalid FPU state in exception handlers 4)....Added: Missed declarations for ExceptionLog (compatibility mode) 5)....Fixed: Work for unsaved projects 6)....Added: Escaping for '--' in options (confuses IDE's XML parsing) 7)....Added: Storing thread's class/name in call stack for terminated threads 8)....Added: More setup logging 9)....Fixed: Help (broken links) 10)..Added: "Upgrade to EurekaLog 7" help topic 11)..Fixed: Clean up installed files EurekaLog 7.0 hot-fix 1 (7.0.0.256), 6-June-2012 --------------------------- 1)....Fixed: Invalid Format() arguments in ELogBuilder. EurekaLog 7.0, 1-June-2012 --------------------------- 1)....Improved: Main change - EurekaLog's core was rewritten (refactored) to allow more easy modification and remove hacks. 2)....Improved: New plugin-like architecture now allows you to exclude unused code. 3)....Improved: New plugin-like architecture now allows you to easily extends EurekaLog. 4)....Improved: Greatly extended documentation. 5)....Improved: Installer is now localized. 6)....Improved: Greatly speed ups creation of minimal bug report (with most information disabled). 7)....Changed: EurekaLog's root IDE menu was relocated to under Tools and extended with new items. 8)....Added: New examples. 9)....Added: New tools (address lookup, error lookup, threads snapshot, standalone settings editor). 10)..Added: Support for DBG/PDB formats of debug information (including symbol server support and auto-downloading). 11)..Added: Support for madExcept debug information (experimental). 12)..Added: WER (Windows Error Reporting) support. 13)..Added: Full unicode support. 14)..Added: Professional and Trial editions: added source code (interface sections only) 15)..Improved: Dialogs - new options and new customization possibilities: 16)..Added: All GUI dialogs: ability to test dialog directly from configuration dialog by displaying a sample window with currently specified settings. 17)..Improved: All GUI dialogs: dialogs are DPI-awared now (auto-scale for different DPI). 18)..Added: MessageBox dialog: added detailed mode (shows a compact call stack). 19)..Added: MessageBox dialog: added ability for asking a send consent. 20)..Added: MessageBox dialog: added support to switch to "native" message box for application. 21)..Added: MS Classic dialog: added control over "user e-mail" edit's visibility. 22)..Added: MS Classic dialog: added ability to personalize dialog view with application's name and icon. 23)..Added: MS Classic dialog: added ability to show terminate/restart checkbox initially checked. 24)..Added: EurekaLog dialog: added ability to personalize dialog view with application's name and icon. 25)..Added: EurekaLog dialog: added ability to show terminate/restart checkbox initially checked. 26)..Added: EurekaLog dialog: added ability to switch back to non-detailed view. 27)..Added: WEB dialog: added new tags to customize bug report page. 28)..Improved: WEB dialog: improved support for unicode and charset. 29)..Added: New dialog type: RTL dialog. 30)..Added: New dialog type: console output. 31)..Added: New dialog type: system logging. 32)..Added: New dialog type: Windows Error Reporting. 33)..Improved: Sending - new options and new customization possibilities: 34)..Added: All send methods: added ability to setup multiply send methods. 35)..Added: All send methods: added ability to change send method order. 36)..Added: All send methods: added separate settings for each send method. 37)..Added: All send methods: ability to test send method directly from configuration dialog by sending a demo bug report. 38)..Added: SMTP client send method: added SSL support. 39)..Added: SMTP client send method: added TLS support. 40)..Added: SMTP client send method: added option for using real e-mail address. 41)..Added: SMTP server send method: added option for using real e-mail address. 42)..Added: HTTP upload send method: added support for custom backward feedback messages. 43)..Added: FTP upload send method: added creating folders on FTP (like remote ForceDirectories). 44)..Added: Mantis send method: added API support (MantisConnect, out-of-the-box since Mantis 1.1.0, available as add-on for previous versions). 45)..Added: Mantis send method: added support for custom "Count" field. 46)..Added: Mantis send method: added options for controlling duplicates. 47)..Added: Mantis send method: added support for SSL/TLS. 48)..Added: FogBugz send method: added API support (out-of-the-box since ForBugz 7, available as add-on for FogBugz 6). 49)..Added: FogBugz send method: EurekaLog will update "Occurrences" field (count of bugs). 50)..Added: FogBugz send method: EurekaLog will respect "Stop reporting" option (BugzScout's setting). 51)..Added: FogBugz send method: EurekaLog will respect "Scout message" option (BugzScout's setting). 52)..Added: FogBugz send method: EurekaLog will store client's e-mail as issue's correspondent. 53)..Added: FogBugz send method: added options for controlling duplicates. 54)..Added: FogBugz send method: added support for "Area" field. 55)..Added: FogBugz send method: added support for SSL/TLS. 56)..Added: BugZilla send method: added API support. 57)..Added: BugZilla send method: added support for custom "Count" field. 58)..Added: BugZilla send method: added options for controlling duplicates. 59)..Added: BugZilla send method: added support for SSL/TLS. 60)..Added: New send method: Shell (mailto protocol). 61)..Added: New send method: extended MAPI. 62)..Added: Support for separate code and debug info injection. 63)..Added: Ability to use custom units before EurekaLog's units. 64)..Added: Support for external configuration file in IDE expert. 65)..Added: Now EurekaLog stores only those project options which are different from defaults (to save disk space and reduce noise in project file). 66)..Added: Now EurekaLog stores project options sorted (alphabet order). 67)..Added: Separate settings for saving modules and processes lists to bug report. 68)..Added: Support for taking screenshots of multiply monitors. 69)..Added: More screenshot customization options. 70)..Added: More control over bug report's file names. 71)..Added: New environment variables. 72)..Added: Deleting .map file after compilation. 73)..Added: Support for different .dpr and .dproj file names. 74)..Improved: memory leaks detection feature - new options and new customization possibilities: 75)..Added: Ability to track memory problems without activation of leaks checking. 76)..Added: Support for sharing memory manager. 77)..Added: Support for tracking leaks in applications built with run-time packages. 78)..Added: Option to zero-fill freed memory. 79)..Added: Option to enable leaks detection only when running under debugger. 80)..Added: Option for manual activation control for leaks detection (via command-line switches). 81)..Added: Option to select stack tracing method for memory problems. 82)..Added: Option to trigger memory leak reporting only for large leaked memory's size. 83)..Added: Option to control limit of number of reported leak. 84)..Added: CheckHeap function to force check of heap's consistency. 85)..Added: DumpAllocationsToFile function to save information about allocated memory to log file. 86)..Added: Registered leaks feature. 87)..Added: Run-time control over memory leak registering. 88)..Added: New recognized leak type: String (both ANSI and Unicode are supported). 89)..Added: Memory features support for C++ Builder. 90)..Added: Resource leaks detection feature. 91)..Improved: Compilation speed increased. 92)..Added: Support for generics in debug information. 93)..Added: Chained/nested exceptions support. 94)..Added: Wait Chain Traversal support. 95)..Added: Support for named threads. 96)..Added: Additional information for threads in call stack. 97)..Improved: EurekaLog Viewer Tool: 98)..Added: Now Viewer has its own help file 99)..Added: Viewer now supports a FireBird based database on local file or remote server. 100).Added: You can have more that one user account for FireBird based database. 101).Added: Viewer now can be launched in View mode (Viewer can be configured to any DB or View mode). 102).Added: Viewer's database now supports storing files, associated with the report (you can also add and remove files manually). 103).Added: Viewer supports "Import" and "View" commands for report files. 104).Improved: Extended support for more log formats (XML, packed ELF, etc). 105).Added: Columns in report's list now can be configured (you can hide and show them). 106).Added: There are a plenty of new columns added to report's list. 107).Added: Ability of auto-download reports from e-mail account. 108).Improved: printing - now you can print the entire report (including screenshots). Old behaviour of printing just one tab (call stack only, for example) also remains. 109).Added: Viewer can now have more that one run-time instance . 110).Added: File import status dialog is now configurable (you can disable it, if you want to). 111).Added: There is a preview area for screenshots, available in reports. 112).Improved: Now Viewer is more Vista-friendly (i.e. file associations are managed in HKCU, rather that in HKLM, storing configuration in user's Application Data, etc, etc). 113).Added: Report's list now supports multi-select, so operations can be performed on many reports at time. 114).Added: There are plenty of new command line abilities, like specifying several files and new switches. 115).Improved: Bunch of minor changes and improvements. WARNING: -------- There are many changes in this release. See the "Changed from the old 6.x version" help topic for further information! EurekaLog 7 also have "EurekaLog 6 backward compatibility mode". Please, refer to help file for more information. We also have the detailed "Upgrade guide" in our help system.
日语版：ActiveReports for .NET 18.0J Crack
ActiveReports for .NET 18.0J（以下简称本产品）是一款与 Visual Studio 完全集成的成熟报表创建工具。图表、条码、子报表等多种功能满足您的所有报表需求，导出功能提供更大便利。
ActiveReports for .NET 简单使用
转自 http://www.cnblogs.com/eugenewu0808/archive/2006/10/26/activereports.htmlActiveReports for .NET 简单使用 ActiveReports for .NET 一. ActiveReports for .net的主要功能介绍     支持ASP.NET-ActiveReports在We
计算机缩写术语完全介绍
计算机缩写术语完全介绍 在使用计算机的过程中，你可能会碰到各种各样的专业术语， 特别是那些英文缩写常让我们不知所云，下面收集了各方面的词组， 希望对大家有帮助。 一、港台术语与内地术语之对照 由
数据库(包含打印，安装，报表)

1,217

社区成员

55,952

社区内容

发帖
与我相关
我的任务
社区描述
VB 数据库(包含打印，安装，报表)
社区管理员
  • 数据库(包含打印，安装，报表)社区
加入社区
  • 近7日
  • 近30日
  • 至今

加载中

查看更多榜单
社区公告
暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章