求助!我的桌面分辨率只有800*600,如何设置为1024*768

[jerrykeating]

今天刚刚重装了Red Hat 9,以前一直没装图形界面
开始安装的时候,只有屏幕中间大概800*600的区域显示,周围一圈都是黑的,无法使用
我以为到时候安装显卡驱动,设置好XF86Config就行了
我后来安装了NVIDIA-Linux-x86-1.0-6111-pkg1.run驱动
并按照要求修改XF86Config文件
一下是我的XF86Config文件:

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
#Load "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "未探测过的显示器"
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "nVidia GeForce 2 Go"
VideoRam 16384
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024*768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

其中在section screen 里面的Modes,1024*768是我自己加上的,原来没有

然后startx,显示nvidia公司标志,然后进入图形界面,但是分辨率是800*600

后来我试着把modes里面的800*600 和 640*480都删掉,
这样就完全不能进图形界面了,说no screen,还有一个 fatal IO error

我用XF86Config.backup恢复原来的设置,进入图形界面
想通过 系统设置->显示 来设置显示分辨率
但是 系统设置->显示 根本打不开!

请问该怎么设置才能使用1024*768的分辨率呢?
谢谢!!!

[buyi027]

兄弟，咱们俩的情况一模一样，我也不知道怎么弄呢！

[tengulre]

up

[liutianyu]

我再装的时候，根本就进不去图形界面，叫人着急呀！

[jerrykeating]

我自己解决了!
运行redhat-config-xfree86
如果是笔记本,而且无法辨认监视器,则选择Generic Loptop 1024*768就行了
不选这个,默认的是unknown monitor
这样在screen section里面就只有一个Depth 16的section

只有nvidia 驱动装好了就应该没问题了
今晚搞了一晚上,连同声卡的问题一块解决了!
现在就剩一个上网的问题了.

[jerrykeating]

散分!!!!

[jerrykeating]

开始安装的时候说显示器无法辨认

[jerrykeating]

还有,我用的是笔记本