如何获得鼠标中键上滚和下滚的消息?

citywolf 2004-10-14 12:49:08
如何获得鼠标中键上滚和下滚的消息?
...全文
100 3 打赏 收藏 转发到动态 举报
写回复
用AI写文章
3 条回复
切换为时间正序
请发表友善的回复…
发表回复
DentistryDoctor 2004-10-14
  • 打赏
  • 举报
回复
WM_MOUSEWHEEL Notification

--------------------------------------------------------------------------------


The WM_MOUSEWHEEL message is sent to the focus window when the mouse wheel is rotated. The DefWindowProc function propagates the message to the window's parent. There should be no internal forwarding of the message, since DefWindowProc propagates it up the parent chain until it finds a window that processes it.

A window receives this message through its WindowProc function.


Syntax

WM_MOUSEWHEEL

WPARAM wParam
LPARAM lParam;

Parameters

wParam
The high-order word indicates the distance the wheel is rotated, expressed in multiples or divisions of WHEEL_DELTA, which is 120. A positive value indicates that the wheel was rotated forward, away from the user; a negative value indicates that the wheel was rotated backward, toward the user.

The low-order word indicates whether various virtual keys are down. This parameter can be one or more of the following values.
MK_CONTROL
The CTRL key is down.
MK_LBUTTON
The left mouse button is down.
MK_MBUTTON
The middle mouse button is down.
MK_RBUTTON
The right mouse button is down.
MK_SHIFT
The SHIFT key is down.
MK_XBUTTON1
Windows 2000/XP: The first X button is down.
MK_XBUTTON2
Windows 2000/XP: The second X button is down.
lParam
The low-order word specifies the x-coordinate of the pointer, relative to the upper-left corner of the screen.

The high-order word specifies the y-coordinate of the pointer, relative to the upper-left corner of the screen.
Return Value

If an application processes this message, it should return zero.


Remarks

Use the following code to get the information in the wParam parameter:

fwKeys = GET_KEYSTATE_WPARAM(wParam);
zDelta = GET_WHEEL_DELTA_WPARAM(wParam);

Use the following code to obtain the horizontal and vertical position:

xPos = GET_X_LPARAM(lParam);
yPos = GET_Y_LPARAM(lParam);

You can also use the MAKEPOINTS macro to convert the lParam parameter to a POINTS structure.

The wheel rotation will be a multiple of WHEEL_DELTA, which is set at 120. This is the threshold for action to be taken, and one such action (for example, scrolling one increment) should occur for each delta.

The delta was set to 120 to allow Microsoft or other vendors to build finer-resolution wheels in the future, including perhaps a freely-rotating wheel with no notches. The expectation is that such a device would send more messages per rotation, but with a smaller value in each message. To support this possibility, you should either add the incoming delta values until WHEEL_DELTA is reached (so for a delta-rotation you get the same response), or scroll partial lines in response to the more frequent messages. You could also choose your scroll granularity and accumulate deltas until it is reached.

Windows 95, Windows NT 3.51: Support for the mouse wheel is provided through a separately-running module, MSWheel, that generates a MSH_MOUSEWHEEL message. The MSWheel module, which consists of MSWheel.exe and MSWheel.dll, is installed with the IntelliPoint software that is shipped with the IntelliMouse® pointing device. In addition, MSH_MOUSEWHEEL is defined in the header file (ZMouse.h) that an application must use to implement support for the wheel via the MSWheel module.

MSH_MOUSEWHEEL
zDelta = (int) wParam; // wheel rotation
xPos = LOWORD(lParam); // horizontal position of pointer
yPos = HIWORD(lParam); // vertical position of pointer

Note, there is no fwKeys for MSH_MOUSEWHEEL. Otherwise, the parameters are exactly the same as for WM_MOUSEWHEEL.

It is up to the application to forward MSH_MOUSEWHEEL to any embedded objects or controls. The application is required to send the message to an active embedded OLE application. It is optional that the application sends it to a wheel-enabled control with focus. If the application does send the message to a control, it can check the return value to see if the message was processed. Controls are required to return a value of TRUE if they process the message.

Notification Requirements

Minimum DLL Version None
Header Declared in Winuser.h, include Windows.h
Minimum operating systems Windows 98, Windows NT 4.0

See Also

Mouse Input Overview, GET_KEYSTATE_WPARAM, GET_X_LPARAM, GET_Y_LPARAM, GetSystemMetrics, GET_WHEEL_DELTA_WPARAM, HIWORD, LOWORD, MAKEPOINTS, mouse_event, POINTS, SystemParametersInfo

--------------------------------------------------------------------------------

© 2003 Microsoft Corporation. All rights reserved.
  • 打赏
  • 举报
回复
BOOL CDlgcsdn20Dlg::OnMouseWheel(UINT nFlags, short zDelta, CPoint pt)
{
//向上sDelta为正,向下为负
return CDialog::OnMouseWheel(nFlags, zDelta, pt);
}
lixiaosan 2004-10-14
  • 打赏
  • 举报
回复
基本上同意

WM_MOUSEWHEEL

15,980

社区成员

发帖
与我相关
我的任务
社区描述
VC/MFC 界面
社区管理员
  • 界面
加入社区
  • 近7日
  • 近30日
  • 至今
社区公告
暂无公告

试试用AI创作助手写篇文章吧