应用程序日志中一直报错：Unable to start ldleConnectionChecker: System error: Connection reset

Emma 2023-06-28 14:22:32

你好，我们使用了OFTP端口，OFTP连接测试是成功的，但是在知行之桥的应用程序日志中一直在频繁的报错：Unable to start ldleConnectionChecker: System error: Connection reset Stack TraceNoteat XcoreXarcesbX210X8131.nzc.b(Unknown Source) at arcesb.connectors.oftp.g.d(UnknownSource) at java.lang.Thread.run(Thread,java:750) lnner Exception: System error: Connectionreset Inner Stack Trace   这个是什么问题呢，会影响OFTP的传输吗？

...全文
401 2 打赏 收藏 转发到动态 举报
AI 作业
写回复
用AI写文章
2 条回复
切换为时间正序
请发表友善的回复…
发表回复
CSDN-Ada助手 2023-06-28
精选
  • 打赏
  • 举报
 回复
您的问题已经帮您同步至问答, 链接: https://ask.csdn.net/questions/7971001, 请您保持关注, 如果回答有帮助解决此问题, 麻烦您动动小手给相关的回答点赞, Ada会在评论区为您更新结题状态
泡沫o0 2023-06-29
  • 打赏
  • 举报
 回复

"Connection reset"的错误通常是由于TCP连接异常关闭，比如网络问题、远程主机崩溃或重启等原因造成的。

"Unable to start ldleConnectionChecker: System error: Connection reset"这个错误可能意味着你的应用在尝试建立一个连接，用于检查空闲连接(idle connections)的状态，但是由于某种原因，这个连接被重置了。

至于这个问题会不会影响到OFTP的传输，这取决于你的程序如何处理这个错误。如果你的程序在遇到这个错误后重新尝试建立连接，并且在后续的重试中成功建立了连接，那么可能不会有太大影响。但是，如果这个错误持续出现并且无法成功建立连接，那么可能会影响到OFTP的传输。

为了解决这个问题，你可以尝试以下几种方法：

  1. 检查网络连接：确保你的服务器可以访问到目标地址，并且网络连接是稳定的。
  2. 重启应用或服务器：有时候，重启可以解决一些网络问题。
  3. 查看详细的错误日志：错误日志可能会提供更多的信息，帮助你定位问题。
  4. 检查防火墙设置：确保你的防火墙没有阻止应用与目标地址的连接。
  5. 联系技术支持：如果以上方法都不能解决问题，你可能需要联系你的应用供应商或网络服务提供商的技术支持。

注意：以上提到的方法都需要一定的技术知识，并可能需要服务器管理员的权限。如果你对这些不熟悉，建议寻找一个有经验的IT专业人员来帮助你。

BURNINTEST--硬件检测工具
PassMark BurnInTest V5.3 Copyright (C) 1999-2008 PassMark Software All Rights Reserved http://www.passmark.com Overview ======== Passmark's BurnInTest is a software tool that allows all the major sub-systems of a computer to be simultaneously tested for reliability and stability. Status ====== This is a shareware program. This means that you need to buy it if you would like to continue using it after the evaluation period. Installation ============ 1) Uninstall any previous version of BurnInTest 2) Double click (or Open) the downloaded ".exe" file 3) Follow the prompts UnInstallation ============== Use the Windows control panel, Add / Remove Programs Requirements ============ - Operating System: Windows 2000, XP, 2003 server, Vista (*) - RAM: 32 Meg - Disk space: 6 Meg of free hard disk space (plus an additional 10Meg to run the Disk test) - DirectX 9.0c or above software for 3D graphics and video tests (plus working DirectX drivers for your video card) - SSE compatible CPU for SSE tests - A printer to run the printer test, set-up as the default printer in Windows. - A CD ROM + 1 Music CD or Data CD to run the CD test. - A CD-RW to run the CD burn test. - A network connection and the TCP/IP networking software installed for the Network Tests Pro version only: - A serial port loop back plug for the serial port test. - A parallel port loop back plug for the parallel port test. - A USB port loop back plug for the USB port test. - A USB 2.0 port loop back plug for the USB 2.0 port test. - PassMark ModemTest V1.3 1010 (or higher) for Plugin Modem testing. - PassMark KeyboardTest V2.2 1011 (or higher) for Plugin Keyboard testing. - PassMark Firewire Plugin V1.0 1000 (or higher) and a 揔anguru FireFlash?drive for Plugin Firewire testing. (*) Windows 2000 does not support the CD-RW burn test. The advanced RAM test is only available under Windows 2000 and Windows XP professional (the other RAM tests are supported under the other OS's). Users must have administrator privileges. Windows 98 and Windows ME ========================= Windows 98 and ME are not supported in BurnInTest version 5.3 and above. Use a version of BurnInTest prior to 5.2 for compatibility with W98 and ME. Windows 95 and Windows NT ========================= Windows 95 and NT are not supported in BurnInTest version 4.0 and above. Use a version of BurnInTest prior to 3.1 for compatibility with W95 and NT. Version History =============== Here is a summary of all changes that have been made in each version of BurnInTest. Release 5.3 build 1035 revision 4 WIN32 release 10 November 2008 - Lenovo China specific build. Lenovo system detection changes. Release 5.3 build 1035 revision 3 WIN32 release 7 November 2008 - Lenovo China specific build. Lenovo system detection changes. Release 5.3 build 1035 revision 2 WIN32 release 6 November 2008 - Lenovo China specific build. Lenovo logo and Lenovo system detection changes. Release 5.3 build 1035 WIN32 release 5 November 2008 - Lenovo China specific build. Changes include: Lenovo logo added, Lenovo system support only, 32-bit BurnInTest restricted to 32-bit Windows and BurnInTest run as administrator. Release 5.3 build 1034 WIN32 release 3 October 2008 - Correction to setting the CD burn test drive in preferences. - Changed the mechanism to check for the required DirectX Direct3D as the previous method did not work on some system (some W2003 servers). - Enhanced the mechanism to report memory hardware errors in the Memory torture test. Release 5.3 build 1033 WIN32 release 1 October 2008 - Changes to correct a BurnInTest crash problem on some systems. When the disk and standard RAM tests are run for many hours, BurnInTest may have disappeared with no error message. Release 5.3 build 1030 WIN32 release 25 September 2008 - Changes to investigate a BurnInTest crash problem on XP SP3. Release 5.3 build 1028 WIN32 release 11 September 2008 - Two 2D Video memory test crash bug workarounds implemented. Crashes in (i) DirectX DirectShow and (ii) ATI atiumdag.dll library. - A hang on startup has been corrected. A 2 minute timeout has been added to the collection of system information. - Video playback, Hard disk and CD/DVD test 'no operations' error reporting changed. - When BurnInTest crashes, it will not generate a "minidump" file. Minidumps will need to be sent to Microsoft as per the normal process. However, a log entry will be added to the normal BurnInTest log. - Changes to trace logging to reduce activity when trace logging is not turned on. - Note: We have seen a report of the Video Playback failing (crash) due to a faulty video codec, ffdshow.ax. If you are using this we suggest you try a different Video file and codec. Release 5.3 build 1027 revision 0003 WIN32 release 19 August 2008 - Changed the 2D test to wait for the Video Playback test in order to allow memory allocation for the Video playback test. - Changed the Memory test to wait for the Video Playback test and 3D test to allow memory allocation for these tests. - Minor changes to the No operation error watchdog timer for the CD and Hard disk tests. - Minor correction to the Butterfly seek test. - Video playback trace logging increased. Release 5.3 build 1027 revision 0002 WIN32 release 19 August 2008 - Video playback trace logging increased. Release 5.3 build 1027 WIN32 release 31 July 2008 - Corrected a bug where BurnInTest would fail to start if Activity trace level 2 logging (debug level logging) was turned on and the Logging Summarize option was also selected. - Minor change to the serial port test where, if "Disable RTS/CTS and DSR/DTR test phase" was selected the DTR and RTS lines would be explicitly disabled to prevent any toggling of these lines. Previously these where enabled, but not explicitly toggled. Release 5.3 build 1026 WIN32 release 17 July 2008 - Updated Level 2 and Level 3 CPU cache information for newer Intel CPU's. - Updated the detection of Hyperthreading and the number of logical CPUs for a new Intel CPU. Release 5.3 build 1025 WIN32 release 11 July 2008 - Corrected a Disk test bug where on rare occasions a verification error is incorrectly displayed. This is during the random seeking phase of the "Random data with random seeking" test mode and only occurs with some specific test settings. Release 5.3 build 1024 WIN32 release 10 July 2008 - Workaround for the rare crash bug in Vista in atklumdisp.dll at address 0x730676ae. - Added trace debug information for BurnInTest startup and the 3D test. Release 5.3 build 1022 WIN32 release 12 June 2008 - Corrected a bug where the 2D video memory test in BurnInTest v5.3.1020 and v5.3.1021 would report a "Not enough video memory available for test" error if the test was run a couple of times (without closing BurnInTest). Release 5.3 build 1021 WIN32 release 5 June 2008 - 32-bit BurnInTest PRO 5.3.1020 would not start on Windows 2000. This has been corrected. Release 5.3 build 1020 WIN32 release 29 May 2008 - BurnInTest could have crashed on accessing bad video memory hardware in the 2D test. This problem is now just reported as an error (and BurnInTest) continues. - When BurnInTest crashes, it should now generate a "minidump" file to help debug which system component caused the failure (32-bit Pro version only). - Other minor changes. Release 5.3 build 1019 WIN32 release 16 May 2008 - Corrected rare crash bugs in the 2D and Video tests. - Added a hot Key, F4, to set the auto run flag and run the tests (i.e. set "-r" and then run the tests). - Other minor changes. Release 5.3 build 1018 WIN32 release 16 April 2008 - Added an operation watchdog timer for all tests. In rare cases, a single test can stop in the operating system - i.e. there is a problem in the operating system/ device driver that prevents control being returned to the BurnInTest for that test. This was added for specialized serial port hardware that could lockup after several hours of testing. Release 5.3 build 1017 WIN32 release 3 April 2008 - Corrected the Advanced Network test to run on non-English Operating Systems. Release 5.3 build 1016 WIN32 release 17 March 2008 - Added additional USB 2.0 Loopback plug test initialization to ensure plugs are in a 'clean' state when starting the USB tests. This was added due to reported USB data verification errors after scripted USB testing across multiple reboots. Release 5.3 build 1015 WIN32 release 27 February 2008 - Increased error reporting detail for the standard RAM test, when the -v command line option is used. Release 5.3 build 1014 WIN32 release 30 January 2008 - Corrected a problem where the loopback sound test could run out of memory if run for several days. Release 5.3 build 1013 WIN32 release 31 December 2007 - Improved the reporting of COM port errors such that in the rare case a COM port locks up in the Operating System, the error is still reported. - Corrected a bug, where in rare cases, the result summary could be duplicated in a log file. - Updated license management, in an attempt to remove a rare crash on startup. Release 5.3 build 1012.0002 WIN32 release 31 October 2007 - New build of Rebooter (64-bit Windows correction). - Clarifications in the help file. Release 5.3 build 1012 WIN32 release 17 October 2007 - Changed the Standard Network Test, "Test all available NICs" such that the number of Network Addresses specified in Preferences->Network will be the number of NICs tested. This will error faulty NICs that are not detected by the BurnInTest auto NIC detection mechanism. - Minor change to the 2D memory test when run with the 3D test (multiple large windows) and the RAM test. Aimed at correcting sympton: Access Violation 0x00404CF9. - Corrections to the mapping of paths with ".\". Release 5.3 build 1011 rev 2 WIN32 release 17 September 2007 - Modified the Multi-Process torture test to better describe a new error message introduced in V5.3.1010. Release 5.3 build 1011 - Public release WIN32 release 11 September 2007 - Corrected a bug where "Limited Evaluation Version" could be displayed even after BUrnInTest is licensed (problem introduced in 32-bit BITPRO V5.3.1010). - Changed the Sound test to allow any of the tests (Wave, Midi or MP3) to be excluded from testing by blanking the filename. - The Command line parameter "-j" (cycle disk test patterns after each test file) could fail during the Random data test due to the mechanism used in BurnInTest. The Random data test is now excluded from the test when (and only when) the "-j" command line parameter is specified. - In rare circumstances, the 2D test number of operations could potentially overflow and become negative. This has been corrected. - In rare circumstances, BurnInTest could hang if there was a system problem in rebooting the system (ie. it failed to shutdown) using PassMark Rebooter. This has been corrected. Release 5.3 build 1010 - Public release WIN32 release 28 August 2007 WIN64 release 28 August 2007 - As BurnInTest exercises system components, it is possible for faulty hardware or device drivers to cause software exceptions. These are normally seen as Windows reporting an "Access Violation". Changes have been made to handle these errors for the memory tests (for faulty RAM) and direct device driver access (for some device driver errors), as well as overarching more generic handling of these types of errors. - Corrected a software failure bug on startup (particularly Vista) where a DirectX function was causing software failures in "dsetup.dll". - Updated the "Activity Event" generated with the periodic results summary report to be numbered (from 1 upwards) such that when "Logging->Summarize", these events are not summarized. - Corrected a bug where the HTML log name could include a duplicate of the filename prefix. - Updated to the Common Errors section of help. Release 5.3 build 1009 - Public release WIN32 release 16 August 2007 - Corrected a 'zip' version cleanup problem. Release 5.3 build 1008 - Komputer Swiat Expert magazine version WIN32 STD release 14 August 2007 Release 5.3 build 1007 - Public release WIN32 release 7 August 2007 - Corrected a disk test startup problem for some large RAID systems when SMART testing is selected. - Added additional logging for the disk test when an error occurs. - Changed the 3D test when run with the 2D EMC test to be 'behind' the EMC scrolling H's test. Allowed the test to be easily exited when running the 3D test in Fullscreen mode. - Minor corrections to the Advanced Network test. - Changed the log file reference of "Network Name" to "Computer Name". WIN64 specific: - MMX and 3DNow! are obsolete for native 64-bit applications. BurnInTest has been changed to show "NA" (Not applicable) in the test window for these tests. Release 5.3 build 1006 - Limited release WIN32 release 17 July 2007 - Standard Network Test changes: - Increased the number of destination IP addresses from 4 to 6. - Added an option (default) "Test all available NICs", which will force traffic down every system NIC with a basic algorithm of NIC1 to IP Address 1, NIC2 to IP Address 2 etc. - Advanced Network test changes: - Simplified the test. - Removed the UDP and FTP options. The Standard Network test can be used as a UDP test. - Removed the Advanced Network test specific logging, and included all relevant logging in the standard BurnInTest logging mechanism. - Replaced the complicated dynamic balancing of any system NIC to any Endpoint NIC with a simpler static allocation on test startup. - Changed the error detection mechanism to detect errors much more quickly. - Re-worked the errors reported. - Changed the CPU throttling mechanism to reduce the CPU load. - Updated endpoint.exe. - Removed checkend.exe (now obsolete). - Changed the logging rollover to work with the output of interim results (e.g. per 1 minute). Previously rollover only occurred on error events written to the log. This also corrected an issue where interim results summary logging could be written to the physical disk with some delay (based on Windows disk caching). - Corrected the "Unknown" reporting of some operating systems. - Added the skipping of the Butterfly seek disk test when run on Vista and insufficient privileges. A notification of this is logged. - Intel Quad core L2 cache size reporting has been added. - Added new SMART threshold descriptions. - Added new disk test options, accessed via command line parameters: /ka: keep disk test files in all cases (c.f. /k keep disk test files on error). /j: cycle patterns between test files. Note: Random seeking will be skipped in this case. This option has been added to allow multiple test patterns to be used across very large disks. - Added an option to make some test settings unavailable to the user. An example configuration file available on request. Release 5.3 build 1005 0001 (STD only) - Public release WIN32 release 29 June 2007 - Corrected a bug introduced in v5.3.1005.0000 STD (only) where the disk test would use up more and more system resources, thus causing test failures. Release 5.3 build 1005 rev 0003 (PRO only) - Limited public release WIN32 release 21 June 2007 - Correction to the behavior of a static RAM test pattern (rather than the default Cyclic pattern). Release 5.3 build 1005 rev 0002 (PRO only) - Limited public release WIN32 release 15 June 2007 - The "Select all CD/DVD drives" preferences option has been made user configurable, rather than using pre-defined test settings. Release 5.3 build 1005 rev 0001 (PRO only) - Limited public release WIN32 release 13 June 2007 - Bug correction for the CD auto selection feature. Release 5.3 build 1005 - Public release WIN32 release 18 May 2007 WIN64 release 18 May 2007 - In a number of cases, such as when specifying the post test application, uppercase application names were not accepted. This has been corrected. - The default font height in the 2D scrolling H's test should have been Arial 9. This has been changed. - The BurnInTest Video playback test incompatibility with Nero 6 and Nero 7 has been resolved. - The BurnInTest disk test throughput for dual core systems has been improved. Release 5.3 build 1004 rev2 - Limited release WIN32 release 8 May 2007 - Changed the Standard Network Test to better report packet error ratios. In addition, a new warning has been added to indicate that errors have been detected but not enough packets have been attempted to be sent to determine accurately whether the configured error ratio has been exceeded. - Corrected a bug where the "append to existing" logging option did not work across scripted reboots, and a new log file was created instead of appending to the existing log file. - If the 3D test was running, then BurnInTest blocked a forced close of BurnInTest, this blocking has been removed. - Changed the PASS and FAIL windows so they can now also be closed by selecting the Windows Close "X" button. Release 5.3 build 1004 - Public release WIN32 release 10 April 2007 WIN64 release 10 April 2007 - Corrected a problem introduced in BurnInTest v5.2 where BurnInTest could run out of memory (the main symptom) when tests where run for long periods (> 12hours). WIN64 specific: - Corrected a bug where the number of cores reported on a Quad core system was incorrectly reported as CPU packages. Release 5.3 build 1003 - Limited release WIN32 release 3 April 2007 - A new 2D GUI (Graphical User Interface) test has been added to the standard 2D graphics test. - Resolved an issue where BurnInTest would fail to start on Vista systems with DEP enabled for all programs. - On some systems, the Disk test could pause momentarily even when a duty cycle of 100% was specified. This pause has been removed. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipped as they are unavailable for testing. - Minor bug corrections. Release 5.3 build 1002 rev 0001 - Limited release WIN32 release 16 March 2007 - Changes to the new 3D test: - Added a Full screen non-windowed test for the primary monitor, where the resolution can be selected from those supported by the Graphics card. - Added the user option of changes the vertical sync in the full screen non-windowed test to be either the Maximum rate of the graphics card, or to be the rate of the monitor (this may prevent some flicker). - Added a more complex water texture using DirectX Vertex Shader 2.0 and Pixel Shader 2.0 effects (if supported by the graphics card). This applies to 3D test windows that are 800x600 or larger. - Changed some error messages from window displays (that require user intervention) to standard error reporting. Added new 3D error messages and more detail in the error reporting. - Changed the definition of an operation to be a successfully displayed frame. - Changed the definition of a cycle to be 2000 frames. - Changed 2D video memory test to wait until the 3D test starts (as per V5.2 and earlier). - A new version of rebooter has been included. - If BurnInTest is started with the -p command line parameter (to use the bit.exe directory for files such as the configuration file), then BurnInTest will start rebooter with the -p option. This can be useful when running BurnInTest and Rebooter from a USB drive. Release 5.3 build 1002 - Limited release WIN32 release 19 March 2007 - Corrected a bug introduced in V5.2 where selecting accumulated logging could lead to rebooter failing to launch. Release 5.3 build 1001 - Limited release WIN32 release 16 March 2007 - The 3D test has been improved. The 3D ball test has been replaced with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been changed to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been added for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. Release 5.3 build 1001 - Limited release WIN32 release 16 March 2007 - The 3D test has been improved. The 3D ball test has been replaced with a more complex 3D terrain test. This will more thoroughly exercise modern graphics cards. Further, the 3D test has been changed to support multi- monitor testing (up to 4 monitors). Accordingly, a new preferences section has been added for the 3D test. The multi-monitor test options are only available in BurnInTest Professional. - BurnInTest uses DirectX 9.0c. This version of BurnInTest uses a more recent version of the Microsoft DirectX Direct3D component, October 2006. BurnInTest has been modified to detect and install this component (file) if it does not exist. - A command line parameter -X has been added to skip the DirectX version checking on BurnInTest start-up. - With the recent introduction of multi-monitor support for the Video Playback test, it is now more likely that the system will run out of memory when running multiple video tests simultaneously, particularly when more memory intensive codecs are used. A specific Insufficient resources to complete test message has been added in this case, rather than the previous more generic unrecoverable error message. The video test have been changed to attempt recovery from this and the more generic unrecoverable error, by closing the current video and opening the next. The logging detail has been increased. - Note: The BurnIntest sample video pack has been altered with the DivX Compressed Video file being removed due to the DivX codec failing with this Video file when used with multiple simultaneous Video playbacks. Access Violation: 0x69756e65. See: http://www.passmark.com/download/bit_download.htm - The video description is now collected for a larger range of Vista systems. - Windows 98 and ME are no longer supported. Please see www.passmark.com for a link to an older version of BurnInTest that will support W98/ME. Release 5.3 build 1000 rev2 - Limited release WIN32 release 9 March 2007 - A command line parameter -P has been added to allow the BurnInTest directory to be used rather than the User's personal directory. This may be useful when running BurnInTest from a USB drive for example. - When running the CD test under BartPE (Pre-install environment) 4 additional specific files are skipped as they are unavailable for testing. - A change has been made to support Hmonitor temperature monitoring on Vista. - A number of undocumented command line parameters have been documented: -B: BurnInTest will generate additional Serial port test information when activity trace level 2 logging is set. -E [data]: Specifies the test data to use in the serial port test. -M: Automatically display the Machine ID Window when BurnInTest is started. -U: Force BurnInTest to set logging on at startup. Release 5.3 build 1000 - Limited release WIN32 release 8 March 2007 - Changed the 2D and Video playback tests to support multi-monitor testing. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipped as they are unavailable for testing. Release 5.2 build 1006 - Limited release WIN32 release 1 March 2007 - Corrected a bug where BurnInTest would fail to start on certain Vista systems. - Corrected a bug where some files where the full path was not specified would be incorrectly referenced in the Program Files directory, rather than the user personal directory. Release 5.2 build 1005 - Public release WIN32 release 21 February 2007 WIN64 release 21 February 2007 - Updated the Graphics card description for Windows Vista systems. - Updated the Advanced Network test to indicate that elevated administrator privileges are required when running on Vista. - Moved files from the Program files directory for the Advanced Network Test (BurnInTest, EndPoint and CheckEnd). Specifically, the User Application directory is now used for the temporary test FTP files and the User Personal directory is now used for the log and configuration files. - Updated the cleanup process for when running the "zip" version of BurnInTest Professional from a CD or flash drive. - Updated the help link from the Windows Start, All Programs, BurnInTest menu for the browser based help. - Corrected a bug where Disk preferences displayed in the Preferences window would be incorrect when the system had no Floppy drive. - Corrected a bug where the Advanced Network test might not have been displayed until after entering the Duty Cycle selection (ie. just chaning from the standard network test to the advanced test). - Corrected a USB bug in Beta 5.2.1003 where the test would not run if there where there insufficient USB loopback plugs attached to the system. - Included a new version of PassMark Rebooter that supports Windows Vista. Release 5.2 build 1004 - Public Pre-release WIN32 release 13 February 2007 - Updated the reported Operating system for the various Vista product editions. - Disk test settings can be configured for "Automatically Select all Hard Disks", rather than using defaults. - When running the CD test under BartPE (Pre-install environment) 4 specific files are skipped as they are unavailable for testing. - Corrected a bug where temperature information could be duplicated in the HTML report. - Corrected a bug certain 'save report' warning messages could be truncated. - Help file updated. Release 5.2 build 1003 - BETA RELEASE ONLY WIN32 release 23 January 2007 - Changed the USB preferences and test to more completely check for the PassMark USB Loopback plugs and ignore any device that is not a PassMark USB Loopback plug (due to reported incorrect detection with another hardware device). - Increased Trace level debugging for Intel temperature monitoring. - Corrected a bug with the disk test introduced in 5.2.1001 Release 5.2 build 1002 - BETA RELEASE ONLY WIN32 release 22 January 2007 - Increased the number of disks that can be tested from 20 to 26. - Updated BurnInTest to reflect that Temperature monitoring with Intel Desktop utilities is supported. Intel Desktop utilities essentially is a replacement for Intel Active Monitor for newer Intel motherboards. - Increased Trace level debugging for Intel temperature monitoring. Release 5.2 build 1001 - BETA RELEASE ONLY WIN32 release 19 January 2007 - Windows Vista support. - The Block size used in the disk test is now configurable per disk. The default block size has been increased from 16KB to 32KB. - An option has been added to automatically detect all of the CD and DVD drives for the CD test (as per the disk test). This may be useful when testing across many systems with different optical drive configurations. - Increased Trace level debugging for Intel temperature monitoring. - Bugs corrected: - Disk preferences - in rare cases invalid default values could be set for a disk, an invalid value error would occur and the values would need to be manually corrected. Release 5.2 build 1000 - limited release WIN32 release 8 January 2007 - Windows Vista support. - Reduced the need for elevated administrator privileges: - Changed the location of the disk test files from the root directory of the test volume to a BurnInTest data files subdirectory (e.g from "C:\" to "C:\BurnInTest test files\") - Moved many of the files from the Program Files directory to the User directory for Windows 2000, XP and Vista. When running BurnInTest on Windows 98, ME or from a key.dat file (e.g. from a USB drive with a licensed key.dat) BurnInTest will store these files in the BurnInTest program directory. Specifically, the following files have been moved from the Program Files directory to the User Personal directory, e.g. Vista - "C:\Users\\Documents\PassMark\BurnInTest\" XP - "My Documents\PassMark\BurnInTest\" Files: Configuration file, Configuration load/save default directory, Save log file and image default directory, parallel port override "ioports.dat" directory, default command line script directory, log file directory, video file directory, Plugin directory, machine id file directory, Run as script default directory, CD burn image, Advanced network FTP temp files. - Replaced the Help system with Browser based help. - Changed the Disk test block size from 16KB to 256KB. It is planned to make this user configurable in the next build. Release 5.1 build 1014 WIN32 release 2 November 2006 WIN64 release 2 November 2006 - Corrected a bug when running on Vista, where the Standard network test would report a checksum error when the transmitted data was correct. - Corrected a bug where BurnInTest would not stop the tests based on the number of test cycles for the Plugin test or the Advanced Network test. - Made the "Could not set USB2Test mode" USB error message more specific by adding an error for insufficient system resources. - Changed the preferences Window to fit on an 800x600 resolution screen. - Corrected a minor bug in Activity level 2 trace logging with the 'hide duplicate' preference setting. - Corrected a minor memory leak if the 2D test failed to initialize (such as due to a DirectX problem). - The Parallel port test may now be used on Windows Vista. Specifically, the PassMark device driver used for the parallel port test could not be loaded on 64-bit Windows Vista as it was not digitally signed. It is now digitally signed. Release 5.1 build 1013 revision 0002 WIN32 release 19 September 2006 WIN64 release 19 September 2006 - Corrected an Access Violation problem reported by a customer on a particular MB. Release 5.1 build 1013 WIN32 release 7 September 2006 WIN64 release 7 September 2006 - The "Notes" section has been added to the Customer results certificate. - Some additional configuration range validation has been added. Release 5.1 build 1012 WIN32 release 15 August 2006 - Corrected a false report of a "Unable to get disk volume extent information" for the disk butterfly seek test. - Advanced Network test changes for errors: "Corrupt header - packet discarded" and "Advanced Network test timed out" - Advanced Network test Endpoint changes for problems on non-English Operating Systems and systems with the Windows "Network Interface" performance statistics disabled. - SMART parameters on a Samsung Hard Disk caused BurnInTest to fail when running the disk test with SMART thresholds enabled. This has been corrected. - The 2D scrolling H's test could display corrupt characters on the second and subsequent test run. This has been corrected. - A problem with the Integer maths test where the results could display a negative number of operations has been resolved. - Minor improvements to the help file. - HTML help file added for Windows Vista and Longhorn Server. - Minor improvements to the Error Classification file (error descriptions). - Some CD Trace level 1 logging has been moved to trace level 2. - Trace level 1 logging has been added to the test closing software. - New build of Endpoint.exe (1.0 1010). Release 5.1 build 1011 WIN32 release 6 July 2006 - New Advanced Network test error reporting added in the previous build V5.1 1010 has been removed. - A broader range of USB 2.0 Loopback plugs can now be used with BurnInTest. Release 5.1 build 1010 WIN32 release 4 July 2006 - Corrected the HTML report description of the L2/L3 CPU cache when the L3 cache size could not be determined. Advanced network changes: - Endpoints ran at 100% CPU load as they contained no throttling. This impacted their ability to effectively handle multiple threads handling TCP/UDP messaging. Throttling has been added to the EndPoint side to reduce CPU load. This does not greatly impact Network load. - Throttling on the BurnInTest side contained a sleep that was not insignificant. This could have impacted the BurnInTest data test thread to to handle incoming TCP and particularly UDP messages. This sleep has been reduced and other throttling parameters changed to suit. (ie. smaller sleeps more often). - EndPoint systems with x NICs (where x > 1), reported themselves as an Endpoint with x NICs, x times. Effectively registering with BurnInTest as x * x EndPoint NICS. This impacted the effectiveness of the load distribution to EndPoint NICs. An Endpoint system now only registers the once with BurnInTest. - The BurnInTest side did not report data verification Checksum errors for full duplex testing. This error determination has been corrected and reporting added. - The Test statistics sent from the Endpoint to BurnInTest could fail if the statistics block is split across 2 lower level TCP send packets. This could lead to problems like incorrect reporting of Endpoint determined checksum errors, Endpoint load and load balancing. Further it would lead to an Endpoint testthread being put into an endless TCP send loop. This would eventually bring the Endpoint system to its knees as more and more of these test threads go into this state. This has been corrected. - The Data Received reported by BurnInTest was double counted. This has been corrected. Release 5.1 build 1009 WIN32 release 23 June 2006 - Plugin test error classifications were incorrect in the log file detailed description. - Corrections to the advanced network test (BurnInTest and EndPoint). Release 5.1 build 1008 - limited release WIN32 release 20 June 2006 - Advanced network changes corrections. Most notably, a bug where part of the payload data could be lost if the payload block (eg. 1000 bytes) was split across 2 (or more) lower level TCP packets. - Added version reporting for Endpoints. Release 5.1 build 1007 - limited release WIN32 release 16 June 2006 Advanced network changes: - Corrected a BurnInTest access Violation introduced in V5.1 1006. - The Endpoint now reports its version and build to BurnInTest and BurnInTest reports this in the log file if it is an earlier version than expected. This is to help avoid the situation where old Endpoints are run on the Network, that may not be compatible with the version of BurnInTest being run by the user. - Removed a timeout report in a specific instance where a timeout is not an error. - Changed the Endpoint rebalancing and polling to occur less often after the test has been running 3 minutes. This is to help allowing the handling of polling from a larger number of multiple copies of BurnInTest on the Network. - Added a connection retries on failure for the Endpoint. - Corrected a memory leak in the Endpoint. - Increased the number of sockets supported. - Corrected some Advanced Network error classifications. Release 5.1 build 1006 - limited release WIN32 release 14 June 2006 - Improvements to the Advanced Network test (both BurnInTest V5.1 1006 and EndPoint V1.0 1004) to remove corrupted false packet corruption errors. Improved the timeout recovery mechanism. Added some validation to the Windows Network performance data used for NIC utilization. - Changes to the collection of Disk drive information on startup to try to resolve a startup issue on Systems with a large number of physical drives and 'unusual' WMI namings. Release 5.1 build 1005 WIN32 release 2 June 2006 - Corrected a bug in the Advanced network test where the test would not recover from timeout errors. The test appears to be running, but the results are 0 and the number of connected End Points are 0. Also improved the retry on timeout mechanism. - Removed some duplication in error reporting in the Advanced Network test. - Changed the Advanced Network display of Utilization to ensure a maximum of 100% displayed. - Corrected an Advanced Network test bug where the number of Errors reported in the test window would not take into account the corrupt packet threshold, and an error would be added for each occurrence of the corrupt packet (rather than when the user set threshold was reached). Release 5.1 build 1004b WIN32 release 25 May 2006 (not publicly released) - Corrected the default Advanced network corrupt packet threshold value. - Updated the data entry fields in the CD preferences when a different CD drive is selected. - The Advanced Network specific log files should be concatenated for a script run. This was only occurring for the first NIC under test. The concatenation will now occur for each NIC under test, when run from a script. - Corrected a bug where a log file name specified with no directory path could be incorrect. - Corrected a bug where the customer "Test Certificate" report incorrectly translated the "%" character from a customer specific HTML template. eg would be translated to . - The "Advanced Network test error" (215) has been removed and replaced with other existing error messages 214, 219, 220, 221 or 222. - Added the Customer name and Technician name to the text and HTMl reports. Previously, this information was only included in the "Test Certificate" report. - We have added a commandline option to specify the Serial port test data as a constant value. To specify specific data for the Serial port test you should specify e.g. "bit.exe /E 23" from the command line where 23 is in decimal and will be used for all test data (instead of random data). The vales should be between 0 and 255. Release 5.1 build 1004 WIN32 release 19 April 2006 (not publicly released) - Added the COM port speed of 921600 Kbits/s for RS 422/RS485 testing. - Changed the CD test to ensure that the entire test CD data is not cached on systems with a large amount of RAM. - Added a -M command line option to display the Machine ID window automatically when BurninTest starts. - Changed the 2D EMC scrolling H's test to work on multiple monitors were the resolution on each is different. - Changed log files such the syntax "..\" could be used for files in the directory up a level. - Minor correction to the advanced network test. Release 5.1 build 1003 WIN32 release 18 April 2006 WIN64 release 18 April 2006 - Changed the Advanced network test to allow a corrupt packet threshold value up to 1 million. - Bundled a new version of rebooter. Release 5.1 build 1002 WIN32 release 11 April 2006 WIN64 release 11 April 2006 - Corrections to the translation of V4.0 to V5 configuration files. Note: Configuration files in V5.x builds prior to V5.1 1002 could become corrupted if a V4.0 configuration file is loaded. - Corrected a bug where the main Window size and location were not restored on restarting BurnInTest. - Changes to the SMART attribute logging to support a greater range of Disk drive device drivers. Added additional Activity Level 2 trace logging. - Added an option to use CTS (Clear To Send) flow control in the loop back stage of the COM port test. - Corrected a bug where the CPU L3 cache could be reported as -1. - Help file updates. Release 5.1 build 1001 WIN32 release 30/March/2006 - Digitally signed the BurnInTest application to allow it to run under Windows Server "Longhorn". Note, previously only the installation package was digitally signed. - Updated the reported Operating system descriptions, including: - Windows Vista - Windows Server "Longhorn" - Corrected a bug where the Advanced network information was not displayed on the main window when it was run from a script. - The Advanced Network Corrupt threshold packet has been changed to produce an error every time the error is received after the threshold is reached. - Corrected the reporting of "Network, Packet discarded due to corrupt header" as a Network test error. - Corrected a bug where a new log file was not created if (only) the log prefix changed during the running of a script file. - Split the "Network, Advanced Network test error" error into 6 errors: "Network, Advanced Network test error" "Advanced Network Socket error" "Advanced Network Send error" "Advanced Network Send error - no data sent" "Advanced Network Receive error" "Advanced Network Receive error - no data received" Added either activity trace 1 or trace 2 logging for each of the errors, with additional information where available. - Added additional Serial port activity trace 2 logging. Including the logging of all transmit buffer data when the /B command line is used. Release 5.1 build 1000 WIN32 release 27/March/2006 (not a public release) Added the following features: - Create the log file directory specified in the Logging Options if it does not exist. - Condense the Advanced Network Test log files to one log file per IP address per script run, when run from a script. - Added an option to summarize duplicate errors in the log file. - Color coded errors based on severity in the Detailed event log Window and the HTML log file. - Added an option to only create a log file when BurnIn actually runs a test as opposed to every time BurnIn is executed. - Added a warning if a test thread completes with 0 cycles and 0 operations. - In the results summary html file, inserted more spacing between the 揘otes? and 揇etailed Event Log? - Changed the Activity Trace file format to be the same as the log file, ie. text or HTML, rather than always text. - The 2D 揝crolling H抯?test will now display across multiple screens/displays ?i.e. all active displays. - A threshold has been added for the 揷orrupt header ?packet discarded?event in the advanced network options so that a 揊ail?is not produced when that is the only thing that produces errors. - Added looping capability in scripting. LOOP n { ? } where n is the number of times to repeat the commands in the brackets. - Corrected a bug where PASS could be displayed if the Advanced Network test was the only test running, but it failed. Release 5.0 build 1001 WIN32 release 9/March/2006 - Corrected a bug where Network directory paths were not accepted, eg. for the log file name and post test application file name. - The CPU maths test has been improved to better load up all CPU's. Previously BurnInTest started a maths test thread per physical CPU package. BurnInTest has been changed to start a maths test thread per CPU (= num. physical CPU packages x num. CPU cores x num. logical CPUs). - The CPU preferences have been changed to allow the CPU maths test to be locked to any CPU (ie. select a CPU from a list of CPU's where the number of CPU's = num. physical CPU packages x num. CPU cores x num. logical CPUs). - The Parallel and Serial port error message have been modified in the case where a test plug may not have been connected to indicate that the user should check this. - Corrected a bug where a licenced version could display the message "[limited evaluation version]" Release 5.0 build 1000 WIN32 release 24/February/2006 WIN64 release 24/February/2006 NEW TESTS & IMPROVEMENTS TO EXISTING TESTS BurnInTest Standard and Professional versions. - Added a customer style results certificate. This will save the log file in HTML format but from the perspective of a end customer. This report style can be tailored by the user (through changing an HTML template). - An MP3 playback test has been added to the Sound test. - A color printer test has been added. - A new post test option to allow the results to be printed automatically at the end of a test has been added. - Added new Post-test action options of: - Optionally allow the user to "run an external program & exit" after BIT has been manually stopped. Modify the $RESULT variable to "PASS (manual abort)" or "FAIL (manual abort)" for this case. - Allow the results window to be displayed for all post test options (except Reboot). - Added new Pre-test actions to allow an external application to be run and have BIT wait for the application to exit. On continuing, BIT will run the subscript file (of scripting commands) if it has been created. - Changed the manual Stop buttons, to abort the running of a script (rather than just the current test). BurnInTest Professional specific. - Added a "Plugin" test that allows users to develop their own BurnInTest test modules for specialized hardware. Three external plugins may be specified at once. - A Modem test has been added to BurnInTest as a Plugin. PassMark's ModemTest Version V1.3 (latest build) is required. - A KeyBoard Test has been added to BurnInTest as a Plugin. PassMark's KeyboardTest Version V2.2 (latest build) is required. - A Firewire Test has been added to BurnInTest as a Plugin. PassMark's free Firewire plugin is required and a "Kanguru FireFlash" drive is required. - A new advanced network test has been added. BurnInTest Professional only. - The Memory test now allows the user to specify the type of test pattern to be used. - Testing with the USB 2.0 Loopback plug has been improved. When used with USB 2.0 Loopback device driver V2.0.1002, error details will now be reported for: CRC error reported by USB Host controller BIT STUFF error reported by USB Host controller DATA TOGGLE MISMATCH error reported by USB Host controller STALL PID error reported by USB Host controller DEVICE NOT RESPONDING error reported by USB Host controller PID CHECK FAILURE error reported by USB Host controller UNEXPECTED PID error reported by USB Host controller DATA OVERRUN error reported by USB Host controller DATA UNDERRUN error reported by USB Host controller BUFFER OVERRUN error reported by USB Host controller BUFFER UNDERRUN error reported by USB Host controller NOT ACCESSED error reported by USB Host controller FIFO error reported by USB Host controller TRANSACTION (XACT) ERROR reported by USB Host controller BABBLE DETECTED error reported by USB Host controller DATA BUFFER ERROR reported by USB Host controller In the case of these errors, BurnInTest will re-attempt the operation. The user can set the Error reporting to be skipped for the initial recovery attempt. IMPROVEMENTS TO TESTING FACILITIES - Added a disk autoconfig, such that when tests are started, the disk drives and settings will be defaults to all disks (exc. CD/DVD). This may be useful when testing multiple systems with different hard disk drive letters. - Store the position of the Main window on exiting BurnInTest. On starting BurnInTest, position the main window as saved; on starting tests, position the test windows as saved. - Allow a "drag & drop" of the Configuration file directly on the BurnInTest program icon. - Allow testing 99.5% to 100% of disk, instead of 94%, for disks that do not contain the Windows directory and do not contain a swap file. - Added the ability to log interim results, which may be useful for unstable systems. - AMD and Intel Dual core reporting added. - New L2 CPU cache sizes added to reports. - CPU support for SSE3, DEP and PAE added to reports. - Shortcut of "F1" for contextual help added to all Windows. - Improve the flexibility in specifying the EXECUTEWAIT scripting command for sleeper. - Updated logging header information with the hard and optical drive model. - The 2D and 3D tests have been updated to use DirectX 9.0c. - User interface updated. - The HTML report format has been improved. - The BurnInTest configuration file extension has been renamed from .cfg to use .bitcfg, to ensure the configuration file is associated with BurnInTest. - An error message indicating that accumulated log files are not supported when run from CD or DVD has been added. - To allow smaller test files with very large disks, the minimum disk test file size has been reduced from 0.1% to 0.01% of the disk space. - Log events were previously shown as "INFORMATION" if they were low level errors, or simply additional information (not errors). "INFORMATION" now refers to a low level error, and "LOG NOTE" now refers to additional information (that is not in the error count). - Improved the specific detail of the Serial Port errors detected. BurnInTest now reports framing errors, buffer overrun errors, input buffer overflow errors, parity errors and Transmit buffer full errors as specific error messages (rather than a broader error description). - Added the /k command line so the user can specify not to delete HDD test files if an error occurs. - Increased Activity trace level 1 error logging for Serial port testing. - Increased Activity trace level 1 error logging for Hyper threading detection. - Bundled a new version of the Rebooter program. - Improved the Serial port error logging (displaying baud rate) and increased Activity trace level 1 error logging (displaying erroneous data). - Modified the Window sizes to help improve navigation on smaller displays (i.e. 640x480). - The CPU load for the Standard and Torture RAM tests has been made more linear with the duty cycle setting. Note: This means that compared to the previous build of BurnInTest, less RAM test operations will be run per second (when the duty cycle is less than 100). - Additional debug code and very minor changes in the Loopback sound test. - The Post test option of "Run external application and exit" has been modified such that if no external file is specified, this Post test option will just exit BurnInTest. - Allowed the full range of PassMark USB1 loopback plugs to be used with BurnInTest Professional. - Added additional Activity Trace level 2 logging. - The delay inserted between packets in the USB2 test, when the duty cycle is less than 50, has been changed from at least 1ms to at least 1ms to 50ms (for a Duty Cycle of 49 down to 0). - The subscript commands to configure BurnInTest from an external application (i.e. specified in the bit-script-input.txt file and run by specifying either a pre-test or EXECUTEWAIT application) has been changed to allow "LOAD" commands (in addition to "SET" scripting commands). - Renamed the "Error" log to "Event" log. - Changed the order of the items in an Event log line, such that the Severity is the first item. - The EXECUTEWAIT script command has been modified such that the external application may provide an input script file (of SET... commands) to be run after the EXECUTEWAIT application closes. This allows external applications to define test environment parameters (such as the serial number and machine type). - Added scripting commands: SETSERIAL "1234-shdfgdhs-GHGHG" SETMACHINETYPE "HP XPS800" SETNOTES "Test notes defined by the external application." SETLOG "\Program Files\Plugin\plugin_log" SETPLUGIN "\Program Files\Plugin\plugin.exe" - Added POST TEST application parameter substitution to allow values to be passed to an external application at the end of a test. These are: $RESULT - "PASS" or "FAIL" will be substituted. $SERIAL - The serial number will be substituted. $MACHINETYPE - The machine type will be substituted. $NOTES - The notes will be substituted. - Added extra logging for memory allocation errors in the disk test - Added "log bad sector increase" and "bad sector threshold" options to disk test. This resulted in a change to the configuration file format and required additional code to automatically convert from old formats. - Modified the user interface in the preferences window for the disk test and the CD test - Improved the handling of USB 2.0 loopback plugs recovery from sleep states. BUG CORRECTIONS - Corrected a bug where the System and Application events logged in the BurnInTest Trace logs were wrong if the event log had reached its maximum size. - Checks that the Sound test files (WAV and MIDI) exist have been added. - The continuous auto updating of the USB image (USB Loopback plug vs. USB 2.0 Loopback plug) on the main window has been removed. This is now updated on BIT startup, selecting Refresh in USB preferences or on starting a test. If there is a serious USB problem, this (together with the USB 2.0 Loopback device driver, V2.0.1002) will avoid the possibility of BurnInTest locking up. - Corrected a bug with the Butterfly seek mode of the Disk test. This was found to occur with FAT32 disks where the Cylinder size was relatively small and the Sector size relatively large. - Reset Defaults on the Configuration Page now resets the Auto Stop Value. - Reset Defaults on the Configuration Page now resets the color indicators. - The CD test has been modified to skip invalid files either with "?"'s , to avoid reporting errors that are due to the CD test media filenames. - The Network test results window scroll bar has been corrected. - The Memory torture test could fail on some systems with a small amount of RAM and relatively high memory fragmentation. This has been corrected. - Scripting correction for .cmd files. - Corrected a bug that caused problems when running the disk test with SMART monitoring turned on. This problem only occurs on a small number of HDD's. - Corrected memory leaks - On occasion, the measured waveform from the loopback sound test may have been slightly altered on starting or stopping all tests, possibly enough to trigger an error. This has been resolved. - If an error occurred in the final second of a test, the error may have been logged but not included in the big PASS/FAIL results window. This has been corrected. - After running a script file that loaded a configuration file, that had a full path specified, the Save and Load configuration menu options no longer worked. This has been corrected. - Previously, the Version of BurnInTest was only written in the First log file after starting BurnInTest. This log line is now written in all log files. - For USB2 tests that have read or write failures, the Windows error codes are now included in the level 2 Activity trace log. - Command line parameters may now be passed to a PreTest application. - Log files may now use a single static filename. This may be useful when the log file is to be parsed by an external program. - Corrected a bug where the Plugin test would stop prematurely. - Corrected the specification of the Scripting EXECUTEWAIT filename. - Changed Script processing such that a script is aborted if a scripting error is encountered and Stop on error is selected. - Added an indication on the main window that a script is currently running ("Script currently running"). - Corrected the serial port test to identify non-existing plugs when the Disable RTS/CTS and DSR/DTR testing has been selected. - Corrected the display of strange results (666666) reported by a user, related to copy protection. - Fixed a memory leak bug in the MBM interface which caused memory allocation errors. - Added BIT version number to the ASCII log file. - Fixed a bug with the 3D Test that was causing it to stop before the autostop timer period - Changed an error in the tape drive test to a warning if tape drive doesn't support setting drive parameters. History of earlier releases: Please see http://passmark.com/products/bit_history.htm Documentation ============= All the documentation is included in the help file. It can be accessed from the help menu. There is also a PDF format Users guide available for download from the PassMark web site. Support ======= For technical support, questions, suggestions, please check the help file for our email address or visit our web page at http://www.passmark.com Ordering / Registration ======================= All the details are in the help file documentation or you can visit our sales information page http://www.passmark.com/sales Compatibility issues with the Network & Parallel Port Tests =========================================================== If you are running Windows 2000 or XP, you need to have administrator privileges to run this test. Enjoy.. The PassMark Development team
S7A驱动720版本
S7A驱动，7.20版本， Version history S7A OPC server and FIX driver for Siemens S7/S5 communication via Ethernet TCP/IP, MPI or Profibus Version 7.20 Date: 26.02.2007 Version history ================================================================================================================== Build 224 New Functions: Solved problems: - The setup program created a wrong e-doc link in Windows start menu. Now the proper link to S7A.CHM will be installed - From the S7A power tool it wasn't possible to open the online help file. Now it can be opened and also the context-sensitive help works properly. - When the signal conditioning function "S&M" was used for a byte value, the driver wrote wrong values to the PLC. Build 223 : New Functions: - The number of supported NetLinks has been increased from 4 to 64 - Communication error messages will be now displayed in the alarm history of iFIX. This helps to detect, trace and solve communication issues. - Support for MATRIX licence key added. This key does not require a special key driver. It simply needs a PC and a windows version which supports USB ports. - When using the driver in conjunction with NetLink adapter, the licensing now can take place by a license code in the NetLink. In this case a separate licence key (dongle) is not needed. Note: If the connection to the NetLink is disturbed, the driver starts in demo mode, because it can't read out the licence code. If afterwards the connection to the Netlink can be established, the driver automatically changes from demo mode to the licenced mode as long as the demo time has not yet expired. - Support for S7-200 with CP 243-1 was added. Solved problems: - Passing of invalid OPC Item IDs caused a memory leak of the driver's global memory. After the global memory was exhausted, the driver crashed. - Writing of string values failed when using hardware options NULLTERM or SPACEFILL - Wrong OPC timestamp occured when driver was running in NIO Simulation Mode - The driver could crash when the driver was stopped (either by hand or when the demo time was expired) and in the same moment the NetLink connection was disturbed. - Improvements on the seamless switching between primary and backup devices and vice versa. - The passing of invalid OPC Item IDs caused a memory leak in the driver's global memory. After the global memory was exhausted, the driver crashed. - The writing of strings failed when using the hardware options NULLTERM or SPACEFILL Build 222 : New Functions: - The driver can now be registered as a service with the local system account as the log-on account. For more information see the document "S7A_as_Service.PDF" on the installation CD . - The driver now switches "seamless" between primary and backup device and vice versa. Solved problems: - The field "Default Gateway" has been added to the NetLink's configuration property page - The string write from the OPC Server sometimes failed . This bug has been fixed - After driver uninstall, not all of the S7A-related registry entries were deleted. Now the registry will be completely cleaned from S7A registry entries after uninstall. - The Netlink module generated trace messages to debug window. These trace outputs has been removed. Build 221 : New Functions: - The information field "Runtime Mode" has been added to the system statistic display. This shows whether the driver is running in the demo mode or in the licenced mode (with a valid key). - New control tag: "!RuntimeMode:S7A". A digital (i.e. DI) or analog (i.e. AI) block with the I/O address "!RuntimeMode:S7A" delivers the value 0 (in the F_CV property), when the driver is running in the demo mode, or the value 1, when the driver has found a valid key, and therefore is licenced. This function is also available via the OPC server interface. The same item-ID address format has to be used as with the tag-I/O address, thus "!RuntimeMode:S7A" - The information field "Device in use" has been added to the device statistic display. This shows which device (primary or backup-device) is currently active. This state can also be requested via the "!switch" control tag. A digital (i.e. DI) or analog (i.e. AI) block with the I/O address "!switch: delivers the value 0, when the primary device is active and the value 1 when the backup device is active. For the place holder in the I/O address the logical name of the driver device, which is requested, must be entered . Example: "!switch:D11" delivers the state of the driver device with the name "D11". This function is also available via the OPC server interface. The same address format has to be used for the tag-I/O address as for the item-ID, thus "!switch:" - At the channel parameter dialog for the communicatiomn way "S7 TCP/IP" and "MPI/PB CIF", the combo box "Conn.Type" has been added, which now enables the selection of the connection types "PG", "OP" and "other". Until now, a PG connection was used. - In the device dialog of the communication way "MPI/PB CIF", the input fields "Rack:" and "slot no. of CPU" have been added. This extension now allows the connection to "external" Profibus- CPs (CP 342/443-5 or 343/443-5). The Profibus station address of the Profibus CP is stated in the MPI/PB address field. The rack and slot number of the S7-CPU must be stated in the corresponding fields. Please make sure that slot number of the CPU is entered and not of the Profibus-CP!! - The driver now supports the different date and time data types of the S7 PLC. See Topic "Hardware Options for OPC String and TX-Blocks to support S7 date and time data types" in the S7A online help for detailed information. Build 220 : Solved problems: - The own address of CIF50 MPI/PB communication way was limited to 31. Now the limit is 126. - Bug-fix in PG-PC Interface (CP5611) communication way. Device could be disabled from polling, after CP5611 sent a specific sequence of communication errors. Build 219 : Solved problems: Improvements and new functions: - New Parameter "Max Gap (Bytes)" on Setup parameter property page "Advanced". This parameter defines the maximum address gap between an existing and a new block at which the driver automatically appends the new block to the existing. If the address gap is greater, then the driver creates a new data block. This functionality is active, when the data block auto create option is set on. - New Radio Button selection "Show Window" on Setup parameter property page "Advanced" The driver automatically opens its window which shows trace log messages useful for trouble shooting, when the "Yes" Radio button is on. - New HTML Help Build 218 : Solved problems: - Problems with datablocks which have a length between 180 and 200 bytes. - Unsufficient exception handling in S7AMemory.Dll caused blocking of driver and all other clients (WSACTASK, Workspace, etc.) which reads data from the driver. - Error in MIX Read function could cause blocking of data blocks Build 217 : Solved problems: - In configurations with data blocks which have a primary rate of zero (as fast as possible), it sometimes happened that write requests were "stuck" in the write queue. - Sporadic locks of data blocks after the driver was switched from the primary device to the backup device Improvements and new functions: - Improved error and timeout handling on communication faults. The reply timeout on the device configuration page can no longer be configured. Instead it will be derived from the TCP/IP timeout value, configured on the channel configuration page. The value (in seconds) of reply timeout always is 1 second higher than the TCP/IP timeout. This ensures, that the logical read/write request (time-limited by reply timeout value) will not be cancelled (by timeout) before the physical request (time-limited by TCP/IP timeout value) is finished regulary or through the timeout. - The NIO Simulation mode has been expanded. If it is set "ON" the polling of data blocks will be disabled, due to which no communication errors will arise, as long as a PLC hardware is not connected to the driver. In this mode the iFix data base blocks reads the value of zero or respectively, the last value written to the driver`s output data area. - "!SyncPoll" and "!SyncSend" have been added to allow e.g. an EDA application to read/write a data block synchronously Build 216 : Solved problems: (06.06.05) - Reset of statistic counters failed Build 215 : Solved problems: (31.05.05) - An error in the OLE interface methods ReadValue ()and WriteValue() was corrected. These functions can now be used for example,within the Excel program, to access data block values. - Datablocks stopped polling after an 'unknown error' was returned by CP5611 Build 214 : Solved problems: - Syncronous reads/writes from concurrent OPC clients now work properly New function: - Performance has been improved, especially in configuration with a lot of short data blocks. - system, channel, driver and data block static display has been extended Build 213 : Solved problems: - No reconnect after the MPI/Profibus connection between CP5611 and the PLC was aborted. - S7ADRV.EXE could crash on Multi Processor Systems or Systems with Hyperthreading when error messages (e.g. "Unable to connect to MPI station") were put to driver's log window from different threads concurrently. Build 212 : Solved problems: - The AGLink error code -1268 (Unknown error message of the PLC) caused a blocking of the device. Now the device will be closed and re-opened to recover the error. - under very seldom conditions a AGLink error caused a crash of S7ADRV.EXE Build 211 : Solved problems: - Setup of TCP/IP parameters failed with error -510. Problem has been solved. - Problems in configurations with more than 8 devices within a channel have been solved - Import of CSV file from S7A Version 7.16 failed - Failed to read the AG State - Configuration of a backup IP address caused a driver crash when it tried to switch from primary to backup device Build 210 : New functions: - Communication way MPI/Profibus using Siemens CPs (CP5611, 5613) added - Communication way MPI/Profibus using Hilscher CIF50 PB added - Communication to "old" S5 series via TCP/IP added - The old Sentinel Keys will not supported any longer - Check Box "Disable comm alarming" in datablock configuration allows to suppress the COMM alarms of Tags which addresses a driver datablock which is in communication error state. - Now the OPC server is OPC DA 2.05 complient Build 210 : Solved problems: - Under Windows XP the driver crashed when the network cable was not connected to ethernet card and the driver started. - A communication error on a single device caused comm errors on all other devices of the channel Build 201 : Solved problems: - CSV Import/export works now even for the new communication ways. Build 200 : Solved problems: - Handle leakage when using asynchron read mode of OPC server. This problem was fixed by migration to OPC server toolkit version 7.20 New functions: - The driver now supports additional communication ways (serial adapter, NetLink adapter and Siemens CPs (eg. CP5611). It's no longer a pure TCP/IP driver but a general driver for Siemens S7 which allows to connect via TCP/IP, MPI bus or Profibus using different interface hardware (CPs). Build 128 : Solved problems: - In big configurations with a lot of data blocks when a data block has been written it took too long until this data block was read back. Thus between the write and the read the clients (OPC or FIX) read the old data. Now after a write the driver reads the data block priorized. Build 127 : Solved problems: - The addressing range for PLC's input area and output area has been extended from 0..255 bytes to 0..4095 bytes. Build 126 : Solved problems: - Errors in manual and automatic block write functions has been fixed Build 125 : Solved problems: - Very fast consecutive analog writes to the same data block caused a crash of the S7ADRV.EXE process. This problem has been solved. Build 124 : Solved problems: - Different communication problems has been solved. - Design of message passing to driver window has changed to prevent the driver dead locks which occored under a very seldom conditions. Build 123 : Solved problems: - Changing of the IP-Address while the driver was running had no effect. This problem has been solved. Build 122 : New functions: - Now the devices within a channel processing in parallel mode - Added "Bytes per Second" to device and channel statistics - Logging of read/write requests/responses into a log file is now configurable for individual data blocks. File logging can basically be switched on/off at register page "advanced" in power tool's setup screen. - This version is already prepared to support the S7T loadable database block which will allow to work with the S7 TIME and TIME_OF_DAY data types in iFIX database. - Shared memory management has been changed to fix problems with large configurations and multi processor systems. Solved problems: - In previous versions the S7 rack number had no effect. Now it will be mapped into the right bit positions of the "called TSAP" field when opening the ISO connection within the TCP connection. - An error in output simulations mode was fixed. - An error in auto creation of data blocks was fixed. Build 121 : Solved problems: - When the slot and rack number in the device setings has been changed, the new values wasn't used when the connection has been re-established. Now the change of these parameters take place immediately. Fixed wrong display of Transmitted and Received counters of mission control's driver statistics Build 120 : Solved problems: - The OPC Server now supports read/write of Control-Tags (eg. !Send or !PollRate). Address syntax is equal to Tag I/O Address within FIX-Database. - Driver doesn't work when a channel with 8 devices was configured Build 119 : Solved problems: - Timeout value of channel template was not stored, thus it had no effect when a new channel was added. - IP-Address of device template was not stored, thus it had no effect when a new device was added. - To avoid duplicate Connection Numbers in Driver Device config, now these Connection Numbers are assigned automatically. The "Connection No" Field in Powertool's device configuration dialog is no longer enabled for input but for displaying the assigned Connection Number. - The driver devices are now limited to 8 per channel. - When running S7A driver on W2K without hardlock key (Sentinel or HASP) the Power Tool displayed an exception message box and the driver didn't start in demo mode. This problem has been solved. Build 118 : New function: - Additionaly to the Rainbow Sentinel Key the driver now supports new Aladdin HASP Key. It detects either Sentinel or HASP Key. Solved problems: - The OPC Server now supports String addresses Build 117 : Solved problems: - Now the Input Data Area of S7 can be read. That was not possible in build version 115 and 116. - The I/O address in data base builder now accepts inputs of adresses without blank between data area identifier and adress index (e.g. D11:Q1.7 or D11:I10.0). - Under a certain condidtion the S7ADrv process runs into a deadlock situation This problem has been solved. Build 116 : Solved problems: - Now the switching between primary and backup device can be configured and used. If the communication to the primary device fails, the driver automatically switches to the device configured as backup device. If the connection to the backup device fails, it switches back to the primary device. The switching even can be done by "hand" using a DI Block with I/O address "!switch:. A F_CV value of 0 means primary device is active, F_CV value 1 means backup device is active. To change the active device just assign the corresponding value to blocks F_CV property. Build 115 : Solved problems: none New functions: - To make troubleshooting easier, the driver now allowes to log messages to a log file. To enable file logging, set the following registry key value to 1: "HKLM\Software\Intellution\Drivers\S7A\DriverDefaults\WriteLogToFile" By default this value is set to 0 which disables the file logging. The log file is named S7ADrv.log and located in the drivers default config file path. All messages dispatched to the driver server window will be logged in the file as well. Caution: The log file will "not" be deleted and re-created when driver starts. It's in the users responsibility to watch the size of the log file. If you enable the dispatching of debug level 1 to 3 messages, the log file can become a huge size in a short time!! Build 114 : Solved problems: - If SAC writes faster to the driver's image table than the driver can write to the PLC, after a while the write queue filled up to 100%. This version of the driver no longer queues write requests to PLC addresses which already in the queue, but uses the already queued request by just replacing the old write value by the new value. - In configurations with more than 1 channel, the driver sometimes crashed since This problem has been solved. - The Send and Receive counts in mission control was swapped. New functions: - Driver now runs with dongle RN-4BDNBH-B (S7A) and RN-4CKEBH-B (S7A+S7B) Build 113 : Solved problems: - Error in S7AMemory.dll caused problem in applications with very large configurations (where the shared memory "S7A_InputArea" exceeded 64k). The data type information stored in the Input Area was overwritten to WORD. Thus the SAC Task interpreted the block values always as an integer no matter what data type was set for the data block in power tool. New functions: - none Build 112 : Solved problems: - CSV File import now works fine - When choosed S7M 1.x compatible address syntax, the data type combo box was been set to a data type other that saved before. New functions: - The S7-TIME format now is supported. Use a TX-blocks and the data type identifier 'T' in the Tag's I/O address to address a double word which contains a value in S7-TIME format (e.g. D11.DB100.DBT 10). Write is also possible. Build 111 : Solved problems: - Sometimes the CPU load raised to 100% when writing values. - Read/write of the last byte of a data block failed. - Block write in manaul or auto mode failed - In data block statistics sreen sometimes "stats error windows" occured because some error codes could not be found in AGLink_Error.txt file. New functions: - none Build 110 : Solved problems: - none New functions: - Added hardware options NULLTERM and SPACEFILL to control string write. Build 109 : Solved problems: - Sometimes driver hangs after communication failed. Occured when a lot of data blocks with a very short poll time has been configured and processed. New functions: - none
JLink_Windows_V648.zip
Version V6.48 (2019-07-26) Added flash programming support for AmbiqMicro's AMA2B1KK (Apollo2 Blue; AMA2BEVB). Added flash programming support for AmbiqMicro's AMA2B1KK (Apollo2 Blue; AMA2BEVB). Added unlocking support for Microchip SAML10 series devices. Added unlocking support for Microchip SAML10 series devices. Analog Devices ADUCM355: Reset could not be overwritten using a J-Link script file. Fixed. CCS plugin: Added a new option which allows configuring a J-Link script file (project dependent). Commander: "erase" did not use the EraseChip command to erase the entire flash but the EraseSector command. Changed. Commander: "erase" did not use the EraseChip command to erase the entire flash but the EraseSector command. Changed. DLL Updater (internal): Added Infineons Micro Inspector. DLL Updater (internal): Added Infineons Micro Inspector. DLL: STM32WB55 added support for Co-Processor Wireless stack upgrade. DLL: Added Flash programming support for CYT2B9 series devices. DLL: Added Flash programming support for CYT2B9 series devices. DLL: Added Flash programming support for Cypress Traveo2 CYT2B and CYT4B series devices. DLL: Added Flash programming support for Cypress Traveo2 CYT2B and CYT4B series devices. DLL: Added OTP flash programming support for TI's RM42L device family. DLL: Added OTP flash programming support for TI's RM44L device family. DLL: Added OTP flash programming support for TI's RM46L device family. DLL: Added OTP flash programming support for TI's RM48L device family. DLL: Added flash programming support for Panasonic MN1M7BFxx and MN1M7AFxx series devices. DLL: Added flash programming support for Panasonic MN1M7BFxx and MN1M7AFxx series devices. DLL: Added flash programming support for ST STM32G47xx series devices. DLL: Added flash programming support for ST STM32G4xx series devices. DLL: Added flash programming support for ST STM32G4xx series devices. DLL: Added flash programming support for STM32H745, STM32H755, STM32H747 and STM32H757 series devices. DLL: Added flash programming support for STM32H745, STM32H755, STM32H747 and STM32H757 series devices. DLL: Added flash programming support for WIZnet W7500 series device. DLL: Added flash programming support for WIZnet W7500 series device. DLL: Added native trace buffer support for Renesas RZ/A2M series. DLL: Added support for Cypress CYT2B series devices Cortex-M4. DLL: Added support for Cypress CYT4B series devices Cortex-M7_0 and Cortex-M7_1. DLL: Added support for Cypress MB9DF / MB9EF series (FCR4) devices. DLL: Added support for RISC-V behind a DAP as setup. DLL: Added support for RISC-V via SWD for RISC-V behind a DAP setups. DLL: Added support for SPI FLash Adesto ATXP128/ATXP128R to SPIFI-Lib for indirect flash programming. DLL: Added support for SPI FLash Adesto ATXP128/ATXP128R to SPIFI-Lib for indirect flash programming. DLL: Added support for command string "CORESIGHT_SetCoreBaseAddr" DLL: Cypress PSoC4 family: Under special circumstances, unlock did not work. Fixed. DLL: Cypress PSoC4 family: Under special circumstances, unlock did not work. Fixed. DLL: Flash programming sector sizes corrected for Traveo2 CYT4B series devices. DLL: Flash programming sector sizes corrected for Traveo2 CYT4B series devices. DLL: For the MPC560xx devices, the ECC SRAM was not initialized after connect. Fixed. DLL: Hilscher NetX90 flash bank size, fixed. DLL: Infineon TLE98xx: Some J-Link LITEs could not connect establish a successful target connection due to missing firmware functionality. Fixed. DLL: JTAG: When only having 1 TAP in the JTAG chain and its matches the one for the configured CPU core but the TAP-ID was unknown, connect did not work. Fixed. DLL: Linux: Delayed / slowed execution of certain API functions when using J-Link via USB (e.g. on Close()). Introduced in V6.46. Fixed. DLL: Linux: When calling a J-Link application via the global symlink (e.g. "JLinkExe" instead of "./JLinkExe"), sometimes the JLinkDevices.xml file was not found. Fixed. DLL: Linux: When calling a J-Link application via the global symlink (e.g. "JLinkExe" instead of "./JLinkExe"), sometimes the libjlink* shared library was not found. Fixed. DLL: Microchip J-32 OEM probes could not support legacy Atmel devices. Fixed. DLL: Minor bug in flash programming algorithm for STM32G0xx series devices, fixed. DLL: NXP KW34: Added flash programming support for the program and data flash area. DLL: NXP KW34: Added flash programming support for the program and data flash area. DLL: NXP KW35 / KW36 / KW38 / KW39: Added flash programming support for the data flash area. DLL: NXP KW35 / KW36 / KW38 / KW39: Added flash programming support for the data flash area. DLL: NXP KW38: Corrected device names showen in the device selection dialog. DLL: NXP KW38: Corrected device names showen in the device selection dialog. DLL: NXP KW3x family: Improved flash programming speed significantly. DLL: NXP KW3x family: Improved flash programming speed significantly. DLL: NXP LPC18xx / LPC43xx: After QSPI flash programming, the QSPI flash memory was no longer memory mapped accessible. Introduced in V6.41. Fixed. DLL: Open flash loaders for RISC-V did not work properly anymore (introduced with V6.46). Fixed. DLL: Programming issue while another application is already running on Hilscher NetX90, fixed. DLL: QSPI flash programming: When the QE bit was set before flash programming, it has been cleared but not restored by the DLL. Introduced in V6.46h. Fixed. DLL: Qorvo GP570 / UE878 / QPG6 family: Flash programming did not work in recent silicon revisions. Fixed. DLL: Qorvo GPxxx: Under special circumstances, flash programming did not work. Fixed. DLL: RAM size of ST STM32F412 series devices, fixed. DLL: RISC-V behind a DAP: Setting system variables , , from J-Link script files did not have any effect for RISC-V behind a DAP. Fixed. DLL: RISC-V behind a DAP: Setting system variables , , from J-Link script files did not have any effect for RISC-V behind a DAP. Fixed. DLL: RISC-V: Added reset type "Reset Pin" to explicitly allow resetting the target via the reset pin, instead of the bit DLL: RISC-V: Changed default reset type from reset pin to to support reset on almost all systems, also ones that do not populate a reset pin DLL: RISC-V: Interrupts were not disabled correctly during flash programming for built-in flash algos (works well for open flash loaders). Fixed. DLL: RISC-V: Reset could fail with "core did not halt after reset" even if the core halted correctly. Fixed. DLL: Re-attaching to existing debug session after connecting and disconnecting once via TELNET (e.g. used by RTTClient and RTTViewer) did not work properly. Fixed. DLL: Renesas R5F51306 (RX130) devices were not detected by the J-Link DLL. Fixed. DLL: Renesas RX231: OFS1 could not be modified. Fixed. DLL: Renesas RX: Added support for RX66N series devices DLL: Renesas RX: Added support for RX72M series devices DLL: Renesas RX: Added support for RX72M series devices DLL: Renesas RX: Added support for RX72N series devices DLL: Renesas RX: Added support for RX72T series devices DLL: Renesas RX: Added support for RX72T series devices DLL: Renesas RX: RX66T: Programming of option-setting memory (OSIS) did not work properly. Fixed. DLL: Renesas RX: When connecting to locked RX devices via JTAG (does not affect FINE!), 16-byte IDCODE (OSIS) could be rejected even though the correct code was given. Fixed. DLL: Renesas S7G2: QSPI flash programming did not work for QSPI flashes >= 16MB. Fixed. DLL: Resets during halt of TI RM57L843ZWT device, due to running watchdog, fixed. Enabled cross trigger interfaces to forward debug acknowledge signal to Watchdog. DLL: SPI-Flash programming for Spansion S25FL256L, fixed. DLL: STM32L031K6 secure chip did not work. Fixed. DLL: STM32WB55 added support for Co-Processor Wireless stack upgrade. DLL: TI RM42L420 added EEPROM support. DLL: TI RM44L520/RM44L920 added flash and EEPROM support DLL: TI RM57L843ZWT added EEPROM support. DLL: TI RM57L843ZWT added EEPROM support. DLL: Under some circumstances Flash Cache was not cleaned after erase operations. DLL: Unsecure read protection for STM32L151xx series devices, fixed. DLL: Unsecure write protection for STM32L151xxx series devices, fixed. DLL: When using J-Trace PRO with IAR EWARM a "failed to allocate x bytes of memory" error could occur. Fixed. DLL: Windows: Renesas RX: When using FINE interface and disabling ongoining debug mode on debug session close, it could happen that a thread was not exited gracefully, causing handle leaks. Fixed. DLL: macOS: When calling a J-Link application via the global symlink (e.g. "JLinkExe" instead of "./JLinkExe"), sometimes the libjlink* shared library was not found. Fixed. Firmware: Flasher ARM / PRO / Portable PLUS: Chip erase could fail in stand-alone mode. Fixed. Firmware: Flasher ARM / PRO / Portable PLUS: Parallel CFI NOR Flash memory programming could fail under special circumstances. Fixed. Firmware: Flasher ARM / PRO / Portable PLUS: Stand-alone mode did not work for some devices from Analog Devices (e.g. ADuCM7023). Fixed. Firmware: Flasher ARM / PRO: FWrite command was unable to receive 512 bytes via UART at once. Fixed. Firmware: Flasher ARM V4: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: Flasher ARM/PPC/RX/PRO: Target power supply monitoring could erroneously detect an over-current. Fixed. Firmware: Flasher PRO: Open flash loaders for RISC-V did not work properly anymore (introduced with V6.46). Fixed. Firmware: Flasher PRO: Universal Flash Loader mode detection in batch mode did not work. Fixed. Firmware: Flasher PRO: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: Flasher Portable PLUS did not show the correct status under special circumstances. Fixed. Firmware: Flasher Portable PLUS did not work in J-Link Mode while showing "OK" message. Fixed. Firmware: Flasher Portable PLUS: Universal Flash Loader mode detection in batch mode did not work. Fixed. Firmware: Flasher Portable PLUS: Number of bytes to program was not calculate correctly, progress bar showed wrong percentage. Fixed. Firmware: Flasher Portable PLUS: Open flash loaders for RISC-V did not work properly anymore (introduced with V6.46). Fixed. Firmware: Flasher Portable PLUS: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: J-Link EDU Mini: RISC-V: On implementations that do not populate a "program buffer" CSRs could not be accessed correctly, resulting in non-functional debug sessions. Fixed. Firmware: J-Link EDU Mini: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link EDU/BASE/PLUS V10: Added support for RISC-V behind a DAP as setup. Firmware: J-Link EDU/BASE/PLUS V10: Increased heap size of firmware (Added support for heap over multiple memory ranges with gaps between them) Firmware: J-Link EDU/BASE/PLUS V10: RISC-V: On implementations that do not populate a "program buffer" CSRs could not be accessed correctly, resulting in non-functional debug sessions. Fixed. Firmware: J-Link EDU/BASE/PLUS V10: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link EDU/BASE/PLUS V10: SWO: Under very special circumstances it could happen that the 1st byte received on SWO was swallowed. Only happened, if SWO pin was used for something else between SWO_Stop() and SWO_Start(). Fixed. Firmware: J-Link EDU/BASE/PLUS V10: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: J-Link OB-K22-SiFive: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link PRO V4: Added support for RISC-V behind a DAP as setup. Firmware: J-Link PRO V4: RISC-V: On implementations that do not populate a "program buffer" CSRs could not be accessed correctly, resulting in non-functional debug sessions. Fixed. Firmware: J-Link PRO V4: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link PRO V4: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: J-Link PRO V4: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Firmware: J-Link ULTRA+ V4: Added support for RISC-V behind a DAP as setup. Firmware: J-Link ULTRA+ V4: RISC-V: On implementations that do not populate a "program buffer" CSRs could not be accessed correctly, resulting in non-functional debug sessions. Fixed. Firmware: J-Link ULTRA+ V4: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link ULTRA+ V4: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: J-Link ULTRA+ V4: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Firmware: J-Link-OB-K22-SiFive: Linux: When using both VCOM ports extensively under special circumstances it could happen that the USB communication locked up. Fixed. Firmware: J-Trace PRO V1 Cortex-M: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Firmware: J-Trace PRO V2 Cortex-M: Corrected typo on th webserver trace configuration page. Firmware: J-Trace PRO V2 Cortex-M: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Firmware: J-Trace PRO V2 Cortex: Corrected typo on th webserver trace configuration page. Firmware: J-Trace PRO V2 Cortex: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Flasher ARM / PRO / Portable PLUS: Init/Exit step BNE and BEQ could jump to #step + 1. Fixed. Flasher ARM / PRO / Portable PLUS: Open Flashloader RAMCodes in stand-alone-mode can be >12kB now. Flasher ARM / PRO / Portable PLUS: Stand-alone mode did not work for some ARM devices. Introduced in V6.47b. Fixed. Flasher ARM / PRO: Reading or writing memory in J-Link mode via JTAG caused the firmware to hang and report a USB timeout. Fixed. Flasher: Added stand-alone mode support for Traveo2 CYT2B and CYT4B devices. Flasher: Added stand-alone mode support for Traveo2 CYT2B and CYT4B devices. GDBServer: Under special circumstances, a remote "g" packet error popped up when using the GDBServer with Cortex-AR or MIPS. Fixed. GUI applications (Linux): The directory the application was executed from affected the behavior of the application. Fixed. J-Flash Lite: Updated to select the flash base address of the selected device by default as "Prog. Addr." instead of always 0x00000000. J-Flash Lite: Updated to select the flash base address of the selected device by default as "Prog. Addr." instead of always 0x00000000. J-Flash SPI: Added flash programming support for ISSI IS25LP016D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25LP016D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25LP080D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25LP080D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP016D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP016D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP080D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP080D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP128D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP128D SPI Flash. J-Flash SPI: Licenses that have been burned into J-Link via J-Link Commander "license add" command were not detected properly. Fixed. J-Flash: Generated data files could be unnecessarily big. Fixed. J-Flash: Generated data files could be unnecessarily big. Fixed. J-Flash: Improved error messages during the check, if the data fits into the flash memory. J-Flash: Improved error messages during the check, if the data fits into the flash memory. J-Flash: Licenses that have been burned into J-Link via J-Link Commander "license add" command were not detected properly. Fixed. J-Link BASE/EDU/PLUS: SPI flash programming with J-Flash SPI was very slow. Fixed. J-Link Commander: RISC-V: Added to the list of suggested/available interfaces JFlash: Added command line parameter "?" (Same functionality as "-?"). JFlash: Added command line parameter "?" (Same functionality as "-?"). JFlashSPI: Added SPI flash programming support for ISSI IS25LP016D SPI flash. JFlashSPI: Added SPI flash programming support for ISSI IS25LP016D SPI flash. JFlashSPI_CL: Added command line parameter "?" (Same functionality as "-?"). JFlashSPI_CL: Added command line parameter "?" (Same functionality as "-?"). JLinkRTTClient: Added command line parameter "?" (Same functionality as "-?"). JLinkRTTClient: Added command line parameter "?" (Same functionality as "-?"). JLinkRTTLogger: Added command line parameter "?" (Same functionality as "-?"). JLinkRTTLogger: Added command line parameter "?" (Same functionality as "-?"). JLinkSTR91x: Added command line parameter "?" (Same functionality as "-?") and implemented "help" functionality which returns the available command line parameters. JLinkSTR91x: Added command line parameter "?" (Same functionality as "-?") and implemented "help" functionality which returns the available command line parameters. JTAGLoad: Added command line parameters "?" and "-?" (Same functionality as "/?"). JTAGLoad: Added command line parameters "?" and "-?" (Same functionality as "/?"). PCodes: Changed an ambiguous J-Link report output. PCodes: Resolved an issue where some Cypress PSoC4 devices would not unlock automatically when connecting to them. Fixed. Package: USB driver for VCOM: Under very special circumstances bluescreens could occur when using VCOM. Fixed. (Driver update only applies to Windows Vista and later. Windows XP still uses the old driver as the new one is not compatible to Windows XP anymore) RTTClient: Connecting to existing session did not work correctly on MacOS. Fixed. RTTClient: Linux: Ubuntu: Attaching to existing debug session did not work properly. Fixed. RTTLogger (Linux): Using logrotate lead to null characters being printed before RTT data. Fixed., RTTViewer: Added 'All terminals' message in case of connection loss. RTTViewer: Added information display on how to correctly enter RTT control block search range. RTTViewer: Echo to Terminal 0 / 'All terminals' was not working correctly. Fixed. RTTViewer: Fixed 'Attach to existing session' mode for Windows, MacOS and Linux. RTTViewer: Fixed typo. RTTViewer: Improved J-Link connect/ disconnect sequence. RTTViewer: Improved handling for data logging. RTTViewer: Improved handling for terminal logging. RTTViewer: Improved log messages when connecting to J-Link. RTTViewer: Improved log output. RTTViewer: Improved reconnecting for attach mode. RTTViewer: Improved the handling in case reading of RTT data failed. RTTViewer: In some occasions, the CL option '--autoconnect' did not work. Fixed. RTTViewer: In some rare occasions, clearing a terminal could crash the application. Fixed. RTTViewer: Linux: Ubuntu: Option "Attaching to existing debug session" did not work properly. Fixed. RTTViewer: Some ANSI CSI sequences caused the application to crash. Fixed. RTTViewer: The '--autoconnect' CL option caused the application to crash. Fixed. RemoteServer: Command line options '-select USB=' and '-SelectEmuBySN ' did not work correctly. Fixed. SDK (Windows): Linking against the *.lib files with MinGW did throw errors reg. undefined references to "__security_check_cookie" and "__GSHandlerCheck". Fixed. SDK: JLINKARM_EraseChip() did not use the EraseChip command to erase the entire flash but the EraseSector command. Changed. SDK: JLINKARM_EraseChip() did not use the EraseChip command to erase the entire flash but the EraseSector command. Changed. Trace: Under certain circumstances backtrace was not showing for targets with PTM. Fixed. UM08002: Chapter "Python support" added. UM08002: Chapter "Python support" updated. Section "API Functions": Added "FlashDownload" description
Bochs - The cross platform IA-32 (x86) emulator
Changes in 2.4.6 (February 22, 2011): Brief summary : - Support more host OS to run on: - Include win64 native binary in the release. - Fixed failures on big endian hosts. - BIOS: Support for up to 2M ROM BIOS images. - GUI: select mouse capture toggle method in .bochsrc. - Ported most of Qemu's 'virtual VFAT' block driver (except runtime write support, but plus FAT32 suppport) - Added write protect option for floppy drives. - Bugfixes / improved internal debugger + instrumentation. Detailed change log : - CPU and internal debugger - Implemented Process Context ID (PCID) feature - Implemented FS/GS BASE access instructions support (according to document from http://software.intel.com/en-us/avx/) - Rewritten from scratch SMC detection algorithm - Implemented fine-grained SMC detection (on 128 byte granularity) - Bugfixes for CPU emulation correctness and stability - Fixed failures on Big Endian hosts ! - Print detailed page walk information and attributes in internal debugger 'page' command - Updated/Fixed instrumentation callbacks - Configure and compile - Bochs now can be compiled as native Windows x86-64 application (tested with Mingw gcc 4.5.1 and Microsoft Visual Studio Express 2010) - Added ability to configure CPUID stepping through .bochsrc. The default stepping value is 3. - Added ability to disable MONITOR/MWAIT support through .bochsrc CPUID option. The option is available only if compiled with --enable-monitor-mwait configure option. - Determine and select max physical address size automatically at configure time: - 32-bit physical address for 386/486 guests - 36-bit physical address for PSE-36 enabled Pentium guest - 40-bit physical address for PAE enabled P6 or later guests - Update config.guess/config.sub scripts to May 2010 revisions. - Update Visual Studio 2008 project files in build/win32/vs2008ex-workspace.zip - Added Bochs compilation timestamp after Bochs version string. - GUI and display libraries (Volker) - Added new .bochsrc option to select mouse capture toggle method. In addition to the default Bochs method using the CTRL key and the middle mouse button there are now the choices: - CTRL+F10 (like DOSBox) - CTRL+ALT (like QEMU) - F12 (replaces win32 'legacyF12' option) - display library 'x' now uses the desktop size for the maximum guest resolution - ROM BIOS - Support for up to 2M ROM BIOS images - I/O Devices - 3 new 'pseudo device' plugins created by plugin separation (see below) - Fixes for emulated DHCP in eth_vnet (patch from @SF tracker) - Added support for VGA graphics mode with 400 lines (partial fix for SF bug #2948724) - NE2K: Fixed "send buffer" command issue on big endian hosts - USB - converted common USB code plus devices to the new 'usb_common' plugin Now the USB device classes no longer exist twice if both HC plugins are loaded. - added 'pseudo device' in common USB code for the device creation. This makes the HCs independent from the device specific code. - USB MSD: added support for disk image modes (like ATA disks) - USB printer: output file creation failure now causes a disconnect - re-implemented "options" parameter for additional options of connected devices (currently only used to set the speed reported by device and to specify an alternative redolog file of USB MSD disk image modes) - hard drive - new disk image mode 'vvfat' - ported the read-only part of Qemu's 'virtual VFAT' block driver - additions: configurable disk geometry, FAT32 support, read MBR and/or boot sector from file, volatile write support using hdimage redolog_t class, optional commit support on Bochs exit, save/restore file attributes, 1.44 MB floppy support, set file modification date/time - converted the complete hdimage stuff to the new 'hdimage' plugin - new hdimage method get_capabilities() that can return special flags - vmware3, vmware4 and vvfat classes now return HDIMAGE_HAS_GEOMETRY flag - other disk image modes by default return HDIMAGE_AUTO_GEOMETRY if cylinder value is set to 0 - multiple sector read/write support for some image modes - new log prefix "IMG" for hdimage messages - floppy - added write protect option for floppy drives (based on @SF patch by Ben Lunt) - vvfat support - bugfix: close images on exit - SB16 - converted the sound output module stuff to the new 'soundmod' plugin - SF patches applied [3164945] hack to compile under WIN64 by Darek Mihocka and Stanislav [3164073] Fine grain SMC invalidation by Stanislav [1539417] write protect for floppy drives by Ben Lunt [2862322] fixes for emulated DHCP in eth_vnet - these S.F. bugs were closed/fixed [2588085] Mouse capture [3140332] typo in mf3/ps2 mapping of BX_KEY_CTRL_R [3111577] No "back" option in log settings [3108422] Timing window in NE2K emulation [3084390] Bochs won't load floppy plugin right on startup [3043174] Docbook use of '_' build failure [3085140] Ia_arpl_Ew_Rw definition of error [3078995] ROL/ROR/SHL/SHR modeling wrong when dest reg is 32 bit [2864794] BX_INSTR_OPCODE in "cpu_loop" causes crash in x86_64 host [2884071] [AIX host] prefetch: EIP [00010000] > CS.limit [0000ffff] [3053542] 64 bit mode: far-jmp instruction is error [3011112] error compile vs2008/2010 with X2APIC [3002017] compile error with vs 2010 [3009767] guest RFLAGS.IF blocks externel interrupt in VMX guest mode [2964655] VMX not enabled in MSR IA32_FEATURE_CONTROL [3005865] IDT show bug [3001637] CMOS MAP register meaning error [2994370] Cannot build with 3DNow support - these S.F. feature requests were closed/implemented [1510142] Native Windows XP x64 Edition binary [1062553] select mouse (de)activation in bochsrc [2930633] legacy mouse capture key : not specific enough [2930679] Let user change mouse capture control key [2803538] Show flags for pages when using "info tab" ------------------------------------------------------------------------- Changes in 2.4.5 (April 25, 2010): Brief summary : - Major configure/cpu rework allowing to enable/disable CPU options at runtime through .bochsrc (Stanislav) - Bugfixes for CPU emulation correctness and stability - Implemented X2APIC extensions (Stanislav) - Implemented Intel VMXx2 extensions (Stanislav) - Extended VMX capability MSRs, APIC Virtualization, X2APIC Virtualization, Extended Page Tables (EPT), VPID, Unrestricted Guests, new VMX controls. - Implemented PCLMULQDQ AES instruction - Extended Bochs internal debugger functionality - USB HP DeskJet 920C printer device emulation (Ben Lunt) Detailed change log : - Configure rework - Deprecate --enable-popcnt configure option. POPCNT instruction will be enabled automatically iff SSE4_2 is supported (like in hardware). - Make --ignore-bad-msrs runtime option in .bochsrc. Old --ignore-bad-msrs configure option is deprecated and should not be used anymore. - Enable changing part of CPU functionality at runtime through .bochsrc. - Now you could enable/disable any of SSEx/AES/MOVBE/SYSENTER_SYSEXIT/XSAVE instruction sets using new CPUID option in .bochsrc. - When x86-64 support is compiled in, you could enable/disable long mode 1G pages support without recompile using new CPUID option in .bochsrc. Configure options: --enable-mmx, --enable-sse, --enable-movbe, --enable-xsave, --enable-sep, --enable-aes, --enable-1g-pages are deprecated and should not be used anymore. - Local APIC configure option --enable-apic is deprecated and should not be used anymore. The LAPIC option now automatically determined from other configure options. XAPIC functionality could be enabled using new CPUID .bochsrc option. - Changed default CPU configuration (generated by configure script with default options) to BX_CPU_LEVEL=6 with SSE2 enabled. - CPU - Implemented PCLMULQDQ AES instruction - Implemented X2APIC extensions / enable extended topology CPUID leaf (0xb), in order to enable X2APIC configure with --enable-x2apic - Implemented Intel VMXx2 extensions: - Enabled extended VMX capability MSRs - Implemented VMX controls for loading/storing of MSR_PAT and MSR_EFER - Enabled/Implemented secondary proc-based vmexec controls: - Implemented APIC virtualization - Implemented Extended Page Tables (EPT) mode - Implemented Descriptor Table Access VMEXIT control - Implemented RDTSCP VMEXIT control - Implemented Virtualize X2APIC mode control - Implemented Virtual Process ID (VPID) - Implemented WBINVD VMEXIT control - Implemented Unrestricted Guest mode In order to enable emulation of VMXx2 extensions configure with --enable-vmx=2 option (x86-64 must be enabled) - Bugfixes for CPU emulation correctness - Fixed Bochs crash when accessing the first byte above emulated memory size - Internal Debugger - Introduced range read/write physical watchpoints - Allow reloading of segment registers from internal debugger - Improved verbose physical memory access tracing - BIOS - Fix MTRR configuration (prevented boot of modern Linux kernels) - Fix interrupt vectors for INT 60h-66h (reserved for user interrupt) by setting them to zero - Fix BIOS INT13 function 08 when the number of cylinders on the disk = 1 - I/O Devices - USB HP DeskJet 920C printer device emulation (Ben Lunt) - Misc - Updated Bochs TESTFORM to version 0.5 - SF patches applied [2864402] outstanding x2apic patches by Stanislav [2960379] Fix build with -Wformat -Werror=format-security by Per Oyvind Karlsen [2938273] allow instrumentation to change execute by Konrad Grochowski [2926072] Indirection operators in expressions by Derek Peschel [2914433] makesym.perl misses symbols by John R. Jackson [2908481] USB Printer by Ben Lunt - these S.F. bugs were closed/fixed [2861662] dbg_xlate_linear2phy needs to be updated [2956217] INT13 AH=8 returns wrong values when cylinders=1 [2981161] Allow DMA transfers to continue when CPU is in HALT state [2795115] NX fault could be missed [2964824] bad newline sequence in aspi-win32.h [913419] configure options and build process needs some work [2938398] gdbstub compile error with x86_64 enabled [2734455] shutdown/reset type 05 should reinit the PICs [1921294] extended memory less than 1M wrong size [1947249] BX_USE_EBDA_TABLES and MP table placement [1933859] BX_USE_EBDA_TABLES and memory overlapping [2923680] "help dregs" is a syntax error [2919661] CPU may fail to do 16bit near call [2790768] Memory corruption with SMP > 32, Panic BIOS Keyboard Error [2902118] interrupts vectors 0x60 to 67 should be NULL ! [2912502] Instruction Pointer behaving erratically [2901047] Bochs crashed, closed by guest os [2905385] Bochs crash [2901481] Instruction SYSRET and SS(PL) [2900632] Broken long mode RETF to outer priviledge with null SS [1429011] Use bx_phyaddr_t for physaddr vars and bx_adress for lin adr - these S.F. feature requests were closed/implemented [2955911] RPM preuninstall scriptlet removes /core [2947863] don't abort on unrecognised options [2878861] numerics in the disassembler output [2900619] make more CPU state changeable ------------------------------------------------------------------------- Changes in 2.4.2 (November 12, 2009): - CPU and internal debugger - VMX: Implemented TPR shadow VMEXIT - Bugfixes for CPU emulation correctness (mostly for VMX support). - Bugfixes and updates for Bochs internal debugger - On SMP system stepN command now affects only current processor - Memory - Bugfixes for > 32-bit physical address space. - Allow to emulate more physical memory than host actually could or would like to allocate. For more details look for new .bochsrc 'memory' option. - Cleanup configure options - All paging related options now will be automatically determined according to --enable-cpu-level option. Related configure options --enable-global-pages, --enable-large-pages, --enable-pae, --enable-mtrr are deprecated now. Only 1G paging option still remaining unchanged. - Deprecate --enable-daz configure option. Denormals-are-zeros MXCSR control will be enabled automatically iff SSE2 is supported (like in hardware). - Deprecate --enable-vme configure option, now it will be supported iff CPU_LEVEL >= 5 (like in hardware). - I/O Devices - Bugfixes for 8254 PIT, VGA, Cirrus-Logic SVGA, USB UCHI - SF patches applied [2817840] Make old_callback static by Mark Marshall [2874004] fix for VMWRITE instruction by Roberto Paleari [2873999] fix CS segment type during fast syscall invocation by Roberto Paleari [2864389] Debugger gui maximize on startup by Thomas Nilsen [2817868] Rework loops in the memory code by Mark Marshall [2812948] PIT bug by Derek - these S.F. bugs were closed/fixed [2833504] GUI debugger bug-about GDT display [2872244] BIOS writes not allowed value to MTRR MSR causing #GP [2885383] SDL GUI memory leak [2872290] compilation in AIX5.3 ML10 failes [2867904] crash with cirrus bx_vga_c::mem_write [2851495] BIOS PCI returns with INT flag = 0 [2860333] vista 64 guest STOP 109 (GDT modification) [2849745] disassembler bug for 3DNow and SSE opcodes [1066748] Wrong registers values after #RESET, #INIT [2836893] Regression: Windows XP installer unable to format harddrive [2812239] VMX: VM-Exit: Incorrect instruction length on software int [2814130] bx_debug lex/yacc files incorrectly generated [2813199] MP Tables Missing From BIOS [2824093] VMX exception bug [2811909] VMX : CS Access-rights Type.Accessed stays 0 [2810571] Compile Errors on OSX [2823749] GCC regression or VM_EXIT RDMSR/WRMSR bug [2815929] Vista/XP64 unnecessary panic [2803519] Wrong example in man page bochsrc - these S.F. feature requests were closed/implemented [422766] Large Memory configurations [1311287] Idea for a better GUI [455971] USB support [615363] debugger shortcut for repeat last cmd ------------------------------------------------------------------------- Changes in 2.4.1 (June 7, 2009): - Fixed bunch of CPUID issues - Bochs is now able to install and boot 64-bit Windows images! (special thanks to Mark Ebersole for his patch) - Several bugfixes in CPU emulation (mostly for x87 instructions) - Fixed two critical deadlock bugs in the Win32 gui (patches from @SF tracker) - Fixes related to the 'show ips' feature - removed conflicting win32-specific alarm() functions ('win32' and 'sdl' gui) - feature now works in wx on win32 - Added support for gdb stub on big endian machine (patch by Godmar Back) - Rewritten obsolete hash_map code in dbg symbols module (patch from @SF) - BIOS: implemented missing INT 15h/89h (patch by Sebastian Herbszt) ------------------------------------------------------------------------- Changes in 2.4 (May 3, 2009): Brief summary : - Added graphical Bochs debugger frontend for most of the supported platforms. - Thanks for Chourdakis Michael and Bruce Ewing. - Many new CPU features in emulation - Support for > 32 bit physical address space and configurable MSRs - VMX, 1G pages in long mode, MOVBE instruction - Bugfixes for CPU emulation correctness, debugger and CPU instrumentation. - New config interface 'win32config' with start and runtime menu - USB: added OHCI support, external hub and cdrom - Added user plugin interface support. Detailed change log : - CPU and internal debugger - Support for VMX hardware emulation in Bochs CPU, to enable configure with --enable-vmx option Nearly complete VMX implementation, with few exceptions: - Dual-monitor treatment of SMIs and SMM not implemented yet - NMI virtualization, APIC virtualization not implemented yet - VMENTER to not-active state not supported yet - No advanced features like Extended Page Tables or VPID - Support for configurable MSR registers emulation, to enable configure with --enable-configurable-msrs option Look for configuration example in .bochsrc and msrs.def - Support new Intel Atom(R) MOVBE instruction, to enable configure with --enable-movbe option - Support for 1G pages in long mode, to enable configure with --enable-1g-pages option - Support for > 32 bit physical address space in CPU. Up to 36 bit could be seen in legacy mode (PAE) and up to 40 bit in x86-64 mode. Still support the same amount of the physical memory in the memory object, so system with > 4Gb of RAM yet cannot be emulated. To enable configure with --enable-long-phy-address option. - Implemented modern BIOSes mode limiting max reported CPUID function to 3 using .bochsrc CPU option. The mode is required in order to correctly install and boot WinNT. - Added ability to configure CPUID vendor/brand strings through .bochsrc (patch from @SF by Doug Reed). - Many bugfixes for CPU emulation correctness (both x86 and x86-64). - Updated CPU instrumentation callbacks. - Fixed Bochs internal debugger breakpoints/watchpoints handling. - Configure and compile - Added ability to choose Bochs log file name and Bochs debugger log file name from Bochs command line (using new -log and -dbglog options) - Removed Peter Tattam's closed source external debugger interface from the code. - Removed --enable-guest2host-tlb configure option. The option is always enabled for any Bochs configuration. - Removed --enable-icache configure option. The option is always enabled for any Bochs configuration. Trace cache support still remains optional and could be configured off. - Added configure option to compile in GUI frontend for Bochs debugger, to enable configure with --enable-debugger-gui option. The GUI debugger frontend is enabled by default with Bochs debugger. - Removed --enable-port-e9-hack configure option. The feature now could be configured at runtime through .bochsrc. - Added configure option to enable/disable A20 pin support. Disabling the A20 pin support slightly speeds up the emulation. - reduced dependencies between source files for faster code generation - BIOS - Added S3 (suspend to RAM) ACPI state to BIOS (patch by Gleb Natapov) - Implemented MTRR support in the bios (patches by Avi Kivity and Alex Williamsion with additions by Sebastian Herbszt) - Bug fixes - I/O Devices - Added user plugin support - remaining devices converted to plugins: pit, ioapic, iodebug - added 'plugin_ctrl' bochsrc option to control the presence of optional device plugins without a separate option. By default all plugins are enabled. - added register mechanism for removable mouse and keyboard devices - Hard drive / cdrom - PACKET-DMA feature now supported by all ATAPI commands - ATAPI command 0x1A added (based on the Qemu implementation) - sb16 - Added ALSA sound support on Linux (PCM/MIDI output) - FM synthesizer now usable with MIDI output (simple piano only) - Fixed OPL frequency to MIDI note translation - Fixed MIDI output command - keyboard - added keyboard controller commands 0xCA and 0xCB - USB - USB code reorganized to support more HC types and devices - added USB OHCI support written by Ben Lunt - added external USB hub support (initial code ported from Qemu) - added USB cdrom support (SCSI layer ported from Qemu) - added status bar indicators to show data transfer - VGA - VBE video memory increased to 16 MB - implemented changeable VBE LFB base address (PCI only, requires latest BIOS and VGABIOS images) - I/O APIC - implemented I/O APIC device hardware reset - Config interface - new config interface 'win32config' with start and runtime menu is now the default on Windows ('textconfig' is still available) - win32 device config dialogs are now created dynamicly from a parameter list (works like the wx ParamDialog) - changes in textcofig and the wx ParamDialog for compatibility with the new win32 dialog behaviour - Bochs param tree index keys are case independent now - some other additions / bugfixes in the simulator interface code - Misc - updated LGPL'd VGABIOS to version 0.6c - Updated Bochs TESTFORM to version 0.4 - SF patches applied [2784858] IO Handler names are not compared properly [2712569] Legacy bios serial data buffer timeout bug by grybranix [2655090] 64 bit BSWAP with REX.W broken by M. Eby [2645919] CR8 bug when reading by M. Eby [1895665] kvm: bios: add support to memory above the pci hole by Izik Eidus [2403372] rombios: check for valid cdrom before using it by Sebastian [2307269] acpi: handle S3 by Sebastian [2354134] TAP networking on Solaris/Sparc repaired [2144692] The scsi device can not complete its writing data command by naiyue [1827082] [PATCH] Configurable CPU vendor by Marcel Sondaar [2217229] Panic on EBDA overflow in rombios32 by Sebastian [2210194] Log pci class code by Sebastian [1984662] red led for disk write and titlebar mod by ggbsf [2142955] Fix for monitor/mwait by Doug Gibson [2137774] Patch to fix bug: cdrom: read_block: lseek returned error by Gabor Olah [2134642] Fix scan_to_scanascii table for F11 and F12 by Ben Guthro & Steve Ofsthun [2123036] sdl fullscreen fix by ggbsf [2073039] Remove CMOS accsess from AML code by Gleb Natapov [2072168] smbios: add L1-L3 cache handle to processor information by Sebastian [2055416] bochsrc cpu options for cpuid vendor and brand string by Doug Reed [2035278] rombios: Fix return from BEV via retf by Sebastian [2035260] rombios: El Torito load segment fix by Sebastian [2031978] Fix VMware backdoor command 0Ah by Jamie Lokier [2015277] Remove obsolete comment about DATA_SEG_DEFS_HERE hack by Sebastian [2011268] Set new default format and unit only if both are supported by Sebastian [2001919] gdbstub: fix qSupported reply by Sebastian [2001912] gdbstub: enclose packet data by apostrophes by Sebastian [1998071] fix missing SIGHUP and SIGQUIT with term ui on mingw by Sebastian [1998063] fix wrong colors with term ui by Sebastian [1995064] Compile fix needed for --enable-debugger and gcc 4.3 by Hans de Goede [1994564] Fix typo in RDMSR BX_MSR_MTRRFIX16K_A0000 by Sebastian [1994396] Change hard_drive_post #if by Sebastian [1993235] TESTFORM email address update by Sebastian [1992322] PATCH: fix compilation of bochs 2.3.7 on bigendian machines by Hans de Goede [1991280] Shutdown status code 0Ch handler by Sebastian [1990108] Shutdown status code 0Bh handler by Sebastian [1988907] Shutdown status code 0Ah handler by Sebastian [1984467] two typos in a release! (2.3.7) [1981505] Init PIIX4 PCI to ISA bridge and IDE by Sebastian - these S.F. bugs were closed/fixed [2784148] an integer overflow BUG of Bochs-2.3.7 source code [2695273] MSVC cpu.dsp failure in 2.3.7.zip [616114] Snapshot/Copy crash on Win2K [2628318] 'VGABIOS-latest' bug [1945055] can't 'make install' lastest bochs on loepard [2031993] Mac OS X Makefile bug [1843199] install error on mac osx [2710931] Problem compiling both instrumentation and debugger [2617003] ExceptionInfo conflicts with OS X api [2609432] stepping causes segfault (CVS) [2605861] compile error with --enable-smp [1757068] current cvs(Jul19, 07) failed to boot smp [2426271] cannot get correct symbol entry [2471982] VGA character height glitches [1659659] wrong behaviour a20 at boot [1998027] minwg + --with-term + --with-out-win32 = link failure [1871936] bochs-2.3.6 make fails on wx.cc [1684666] info idt for long mode [2105989] could not read() hard drive image file at byte 269824 [1173093] Debugger totally not supports x86-64 [1803018] new win32debug dialog problems [2141679] windows vcc build broken [2162824] latest cvs fails to compile [2164506] latest bochs fails to start [2129223] MOV reg16, SS not working in real mode due to dead code [2106514] RIS / startrom.com install ALMOST works [2123358] SMP (HTT): wbinvd executed by CPU1 crashes CPU0 [2002758] Arch Linux: >>PANIC<< ATAPI command with zero byte count [2026501] El Torito incorrect boot segment:offset [2029758] BEV can return via retf instead of int 18h [2010173] x command breaks after one error about x/s or x/i [1830665] harddrv PANIC: ATAPI command with zero byte count [1985387] fail to make using gcc4 with --enable-debugger [1990187] testform feedback [1992138] Misspell in cpu/ia_opcodes.h - these S.F. feature requests were closed/implemented [2175153] Update MSVC project files [658800] front end program and bios [1883370] Make cd and floppy images more usable [422783] change floppy size without restarting [2552685] param tree names should be case insensitive [1214659] PC Speaker emu turnoff. Plugin Controll. [1977045] support 40 bit physical address [1506385] Intel Core Duo VT features [1429015] Support for user plugins [1488136] debugger access to floppy controller [1363136] Full debugger SMP and 64 bit support [2068304] Support for ACPI [431032] debugger "x" command [423420] profiling ideas (SMF) [445342] Add FM support? [928439] alsa ------------------------------------------------------------------------- Changes in 2.3.7 (June 3, 2008): Brief summary : + More optimizations in CPU code - Bochs 2.3.7 is more than 2x faster than Bochs 2.3.5 build ! - Implemented LBA48 support in BIOS - Added memory access tracing for Bochs internal debugger - Implemented Intel(R) XSAVE/XRSTOR and AES instruction set extensions - Many fixes in CPU emulation and internal debugger - MenuetOS64 floppy images booting perfect again ! - updated LGPL'd VGABIOS to version 0.6b Detailed change log : - CPU - Support of XSAVE/XRSTOR CPU extensions, to enable configure with --enable-xsave option - Support of AES CPU extensions, to enable configure with --enable-aes option - Fixed Bochs failure on RISC host machines with BxRepeatSpeedups optimization enabled - Implemented SYSENTER/SYSEXIT instructions in long mode - More than 100 bugfixes for CPU emulation correctness (both x86 and x86-64) - MenuetOS64 floppy images booting perfect again ! - Updated CPU instrumentation callbacks - Bochs Internal Debugger and Disassembler - Added memory access tracing for Bochs internal debugger, enable by typing 'trace-mem on' in debugger command line - Many bug fixes in Bochs internal debugger and disassembler - System BIOS (Volker) - Implemented LBA48 support - Added generation of SSDT ACPI table that contains definitions for available processors - Added RTC device to ACPI DSDT table - Added implementation of SMBIOS - I/O devices (Volker) - VGA - Implemented screen disable bit in sequencer register #1 - Implemented text mode cursor blinking - Serial - new serial modes 'pipe-server' and 'pipe-client' for win32 - new serial mode 'socket-server' - Configure and compile - Fixed configure bug with enabling of POPCNT instruction, POPCNT instruction should be enabled by default when SSE4.2 is enabled. - Removed --enable-magic-breakpoint configure option. The option is automatically enabled if Bochs internal debugger is compiled in. It is still possible to turn on/off the feature through .bochsrc. - Allow boot from network option in .bochsrc - Added Bochs version info for Win32 - Display libraries - implemented text mode character blinking in some guis - improved 'X' gui runtime dialogs - SF patches applied [1980833] Fix shutdown status code 5h handler by Kevin O'Connor [1928848] "pipe" mode for serial port (win32 only) by Eugene Toder [1956843] Set the compatible pci interrupt router back to PIIX by Sebastian [1956366] Do not announce C2 & C3 cpu power state support by Igor Lvovsky [1921733] support for LBA48 by Robert Millan [1938185] Fix link problem with --enable-debugger by Sebastian [1938182] Makefile.in - use @IODEV_LIB_VAR@ by Sebastian [1928945] fix for legacy rombios - e820 map and ACPI_DATA_SIZE by Sebastian [1925578] rombios32.c - fix ram_size in ram_probe for low memory setup by Sebastian [1908921] rombios32.c - move uuid_probe() call by Sebastian [1928902] improvements to load-symbols by Eugene Toder [1925568] PATCH: msvc compilation by Eugene Toder [1913150] rombios.c - e820 cover full size if memory <= 16 mb by Alexander van Heukelum [1919804] rombios.c - fix and add #ifdef comments by Sebastian [1909782] rombios.c - remove segment values from comment by Sebastian [1908918] SMBIOS - BIOS characteristics fix by Sebastian [1901027] BIOS boot menu support (take 3) [1902579] rombios32.c - define pci ids by Sebastian [1859447] Pass segment:offset to put_str and introduce %S by Sebastian [1889057] rombios.c - boot failure message by Sebastian [1891469] rombios.c - print BEV product string by Sebastian [1889851] Win32 version information FILEVERSION for bochs.exe by Sebastian [1889042] rombios.c - fix comment by Sebastian [1881500] bochsrc, allow boot: network by Sebastian [1880755] Win32 version information for bochs.exe by Sebastian [1880471] SMBIOS fix type 0 by Sebastian [1878558] SMBIOS fixes by Sebastian [1864692] SMBIOS support by Filip Navara [1865105] Move bios_table_area_end to 0xcc00 by Sebastian [1875414] Makefile.in - change make use by Sebastian [1874276] Added instrumentation for sysenter/sysexit by Lluis [1873221] TLB page flush: add logical address to instrumentation by Lluis [1830626] lba32 support by Samuel Thibault [1861839] Move option rom scan after floppy and hard drive post by Sebastian [1838283] Early vga bios init by Sebastian [1838272] rom_scan range parameter by Sebastian [1864680] Save CPUID signature by Filip Navara - these S.F. bugs were closed [1976171] Keyboard missing break code for enter (0x9C) [666433] physical read/write breakpoint sometimes fails [1744820] info gdt and info idt shows the entire tables [1755652] graphics: MenuetOS64 shows black screen [1782207] Windows Installer malfunction, Host=Linux, Guest=Win98SE [1697762] OS/2 Warp Install Failed [1952548] String to char * warnings [1940714] SYSENTER/SYSEXIT doesn't work in long mode [1422342] SYSRET errors [1923803] legacy rombios - e820 map and ACPI_DATA_SIZE [1936132] Link problem with --enable-debugger & --enable-disasm [1934477] Linear address wrap is not working [1424984] virtual machine freezes in Bochs 2.2.6 [1902928] with debugger cpu_loop leaves CPU with unstable state [1898929] Bochs VESA BIOS violates specs (banks == 1) [1569256] bug in datasegment change in long mode [1830662] ACPI: no DMI BIOS year, acpi=force is required [1868806] VGA blink enable & screen disable [1875721] Bit "Accessed" in LDT/GDT descriptors & #PF [1874124] bx_Instruction_c::ilen() const [1873488] bochs-2.3.6 make fails on dbg_main.cc - these S.F. feature requests were implemented [1422769] SYSENTER/SYSEXIT support in x86-64 mode [1847955] Version information for bochs(dbg).exe [939797] SMBIOS support ------------------------------------------------------------------------- Changes in 2.3.6 (December 24, 2007): Brief summary : + More than 25% emulation speedup vs Bochs 2.3.5 release! - Thanks to Darek Mihocka (http://www.emulators.com) for providing patches and ideas that made the speedup possible! + Up to 40% speedup vs Bochs 2.3.5 release with trace cache optimization! - Lots of bugfixes in CPU emulation - Bochs benchmarking support - Added emulation of Intel SSE4.2 instruction set Detailed change log : - CPU - Added emulation of SSE4.2 instruction set, to enable use --enable-sse=4 --enable-sse-extension configure options to enable POPCNT instruction only use configure option --enable-popcnt - Implemented MTRR emulation, to enable use --enable-mtrr configure option. MTRRs is enabled by default when cpu-level >= 6. - Implemented experimental MONITOR/MWAIT support including optimized MWAIT CPU state and hardware monitoring of physical address range, to enable use --enable-monitor-mwait configure option. - Removed hostasm optimizations, after Bochs rebenchmarking it was found that the feature bringing no speedup or even sometimes slows down emulation! - Merged trace cache optimization patch, the trace cache optimization is enabled by default when configure with --enable-all-optimizations option, to disable trace cache optimization configure with --disable-trace-cache - Many minor bugfixes in CPU emulation (both ia32 and x86-64) - Updated CPU instrumentation callbacks - Bochs Internal Debugger and Disassembler - Many fixes in Bochs internal debugger and disassembler, some debugger interfaces significantly changed due transition to the param tree architecture - Added support for restoring of the CPU state from external file directly from Bochs debugger - Configure and compile - Renamed configure option --enable-4meg-pages to --enable-large-pages. The option enables page size extensions (PSE) which refers to 2M pages as well. - Removed --enable-save-restore configure option, save/restore feature changed to be one of the basic Bochs features and compiled by default for all configurations. - Added new Bochs benchmark mode. To run Bochs in benchmark mode execute it with new command line option 'bochs -benchmark time'. The emulation will be automatically stopped after 'time' millions of emulation cycles executed. - Another very useful option for benchmarking of Bochs could be enabled using new 'print_timestamps' directive from .bochsrc: print_timestamps: enable=1 - Added --enable-show-ips option to all configuration scripts used to build release binaries, so all future releases will enjoy IPS display. - Enable alignment check in the CPU and #AC exception by default for --cpu-level >= 4 (like in real hardware) - SF patches applied [1491207] Trace Cache Speedup patch by Stanislav [1857149] Define some IPL values by Sebastian [1850183] Get memory access mode in BX_INSTR_LIN_READ by Lluis Vilanova [1841421] pic: keep slave_pic.INT and master_pic.IRQ_in bit 2 in sync by Russ Cox [1841420] give segment numbers in exception logs by Russ Cox [1801696] Allow Intel builds on Mac OS X [1830658] Fix >32GB disk banner by Samuel Thibault [1813314] Move #define IPL_* and typedef ipl_entry by Sebastian [1809001] Save PnP Option ROM Product Name string in IPL Boot Table by Sebastian [1821242] Fix for #1801285, Niclist.exe broken by Sebastian [1819567] Code warning cleanup [1816162] Update comment on bios_printf() by Sebastian [1811139] Trivial Fix when BX_PCIBIOS and BX_ROMBIOS32 not defined by Myles Watson [1811190] Improve HD recognition and CD boot by Myles Watson [1811860] Implement %X in bios_printf by Sebastian [1809649] printf %lx %ld %lu by Myles Watson [1809651] move BX_SUPPORT_FLOPPY by Myles Watson [1809652] dpte and Int13DPT fixes by Myles Watson [1809669] clip cylinders to 16383 in hard drive by Myles Watson [1799903] Build BIOS on amd64 by Robert Millan [1799877] Fix for parallel build (make -j2) by Robert Millan - these S.F. bugs were closed [1837354] website bug: View the Source link broken [1801268] Reset from real mode no longer working [1843250] Using forward slashes gives invalid filename [1823446] BIOS bug, local APIC #0 not detected [1801285] Niclist.exe broken [1364472] breakpoints sometimes don't work [994451] breakpoint bug [1801295] NSIS installer vs Windows Notepad [1715328] Unreal mode quirk [1503972] debugger doesn't debug first instruction on exception [1069071] div al, byte ptr [ds:0x7c18] fails to execute [1800080] Wrong "BX_MAX_SMP_THREADS_SUPPORTED" assertion - these S.F. feature requests were implemented [1662687] Download for Win32-exe with x64 Mode and debugging [604221] Debugger command: query lin->phys mapping ------------------------------------------------------------------------- Changes in 2.3.5 (September 16, 2007): Brief summary : - Critical problems fixed for x86-64 support in CPU and Bochs internal debugger - ACPI support - The release compiled with x86-64 and ACPI - Hard disk emulation supports ATA-6 (LBA48 addressing, UDMA modes) - Added emulation of Intel SSE4.1 instruction set Detailed change log : - CPU - Fixed critical bug with 0x90 opcode (NOP) handling in x86-64 mode - implied stack references where the stack address is not in canonical form should causes a stack exception (#SS) - Added emulation of SSE4.1 instruction set (Stanislav) - Do not save and restore XMM8-XMM15 registers when not in x86-64 mode - Fixed zero upper 32-bit part of GPR in x86-64 mode - CMOV_GdEd should zero upper 32-bit part of GPR register even if the 'cmov' condition was false ! - Implemented CLFLUSH instruction, report non-zero cache size in CPUID - Fixed PUSHA/POPA instructions behavior in real mode - Fixed detection of inexact result by FPU - Fixed denormals-are-zero (DAZ) handling by SSE convert instructions - Implemented Misaligned Exception Mask support for SSE (MXCSR[17]) - Implemented Alignment Check in the CPU and #AC exception, to enable use --enable-alignment-check configure option - General - 2nd simulation support in wxBochs now almost usable (simulation cleanup code added and memory leaks fixed) - Configure and compile - several fixes for MacOSX, OpenBSD and Solaris 10 - enable save/restore feature by default for all configurations - reorganized SSE configure options to match Intel(R) Programming Reference Manual, new option introduced for SSE extensions enabling. To enable Intel Core Duo 2 new instructions use --enable-sse=3 --enable-sse-extension enabling of SSE4.1 (--enable-sse=4) will enable SSE3 extensions as well - removed old PIT, always use new PIT written by Greg Alexander, removed configure option --enable-new-pit - I/O devices (Volker) - Floppy - partial non-DMA mode support (patch by John Comeau) - Hard drive / cdrom - hard disk emulation now supports ATA-6 (LBA48 addressing, UDMA modes) - VMWare version 4 disk image support added (patch by Sharvil Nanavati) - PCI - initial support for the PIIX4 ACPI controller - Serial - added support for 3-button mouse with Mousesystems protocol - USB - experimental USB device change support added - rewrite of the existing USB devices code - new USB devices 'disk' and 'tablet' (ported from the Qemu project) - Bochs internal debugger - fixed broken debugger "rc file" option (execute debugger command from file) - implementation of a gui frontend ("windebug") for win32 started - gdbstub now accepts connection from any host - several documentation updates - a lot of disasm and internal debugger x86_64 support fixes - Configuration interface - fixes and improvements to the save state dialog handling - Display libraries - text mode color handling improved in some guis - win32 fullscreen mode (patch by John Comeau) - System BIOS (Volker) - 32-bit PM BIOS init code for ACPI, PCI, SMP and SMM (initial patches by Fabrice Bellard) - PCI BIOS function "find class code" implemented - SF patches applied [1791000] 15h 8600h is reading the wrong stack frame by Sebastian [1791016] rombios32.c, ram_probe(), BX_INFO missing value by Sebastian [1786429] typo in bochsrc.5 by Sebastian [1785204] Extend acpi_build_table_header to accept a revision number by Sebastian [1766536] Partial Patch for Bug Report 1549873 by Ben Lunt [1763578] ACPI Table Revision 0 -> 1 [1642490] implement alignment check and #AC exception by Stanislav Shwartsman [1695652] [PATCH] .pcap pktlog and vnet PXE boot by Duane Voth [1741153] Add expansion-ROM boot support to the ROMBIOS [1734159] Implemented INT15h, fn 0xC2 (mouse), subfn 3, set resolution [1712970] bios_printf %s fix [1573297] PUSHA/POPA real mode fix by Stanislav Shwartsman [1641816] partial support for non-DMA access to floppy by John Comeau [1624032] shows where write outside of memory occurred by John Comeau [1607793] allow fullscreen when app requests it by John Comeau [1603013] Bugfix for major NOP problem on x64 by mvysin [1600178] Make tap and tuntap compile on OpenBSD by Jonathan Gray [1149659] improve gdbstub network efficiency by Avi Kivity [1554502] Trivial FPU exception handling fix - these S.F. bugs were closed [1316008] Double faults when it shouldn't - gcc 4.0.2 [1787289] broken ABI for redolog class when enable-compressed-hd [1787500] tftp_send_optack not 64bit clean [1264540] Security issue with Bochs website [1767217] Debugger Faults including ud2 [1729822] Various security issues in io device emulation [1675202] mptable hosed (bad entry count in header) [1197141] 'make install' installs to bad location [1157623] x86Solaris10 cannot recoginize ACPI RSD PTR [1768254] large HDD in Bochs/bximage [1496157] Windows Vista Beta2 dosn't boot [1755915] Illegal Hard Disk Signature Output [1717790] info gdt and info idt scrolls away, too long result [1726640] Debugger displays incorrect segment for mov instruction [1719156] Typo in misc_mem.cpp [1715270] Debugger broken in/beyond 2.3 [1689107] v8086 mode priviledge check failed [1704484] A few checks when CPU_LEVEL < 4 [1678395] Problem with zero sector... [876990] SA-RTL OS fails on PIC configuration [1673582] save/restore didn't restore simulation correctly [1586662] EDD int 13h bug, modify eax [666618] POP_A Panic in DOS EMU [1001485] panic: not enough bytes on stack [1667336] delay times an order of magnitude slow [1665601] crash disassembling bootcode [1657065] CVS sources won't compile [1653805] bochs's gdbstub uses incorrect protocol [1640737] ASM sti command frezzes guest OS [1636439] latest CVS sources don't compile under Cygwin [1634357] disasm incorrect (no sign ext) displacement in 64-bit mode [1376453] pcidev segfaults bochs [1180890] IOAPIC in BOCHS - WinXP 64 in MP version [1597528] 2.3 fails to compile on amd64 [1526255] FLD1 broken when compaling with gcc 4.0.x [1597451] eth_fbsd is broken under FreeBSD [1571949] Bochs will not compile under Solaris [1500216] Bochs fails to boot BeOs CD [1458339] bochs-2.2.6 WinXP Binary ACPI error installing FreeBSD 6.0 [1440011] patches needed for FreeBSD 6.0 to compile Bochs [431674] some devices don't have a prefix [458150] QNX demo disk crashes with new pit [818322] Bochs 2.1 cvs: OS/2 - read verify on non disk [906840] KBD: bogus scan codes generated in set 3 [1005053] No keyboard codes translation [1109374] Problem with Scancodeset 2 [1572345] Bochs won't continue [1568153] Bochs looks for (and loads?) unspecified display libraries [1563462] Errors in /iodev/harddrv.h [1562172] TLB_init() fails to initialize priv_check array if USE_TLB 0 [1385303] debugger crashes after panic [1438227] crc.cpp missing in bx_debug version 2.2.6 [1501825] debugger crashes on to high input [1420959] Memory leak + buffer overflow in Bochs debugger [1553289] Error in Dis-assembler [542464] I cannot use FLAT [1548270] Bochs won't die with its pseudo terminal [1545588] roundAndPackFloatx80 does not detect round up correctly ------------------------------------------------------------------------- Changes in 2.3 (August 27, 2006): Brief summary : - limited save/restore support added (config + log options, hardware state) - configuration parameter handling rewritten to a parameter tree - lots of cpu and internal debugger fixes - hard disk geometry autodetection now supported by most of the image types - hard disk emulation now supports ATA-3 (multiple sector transfers) - VBE memory size increased to 8MB and several VGA/VBE fixes - updated LGPL'd VGABIOS to version 0.6a Detailed change log : - CPU and internal debugger fixes - Fixed bug in FSTENV instruction (Stanislav Shwartsman) - Recognize #XF exception (19) when SSE is enabled - Fixed bug in PSRAW/PSRAD MMX and SSE instructions - Save and restore RIP/RSP only for FAULT-type exceptions, not for traps - Correctly decode, disassemble and execute multi-byte NOP '0F F1' opcode - Raise A20 line after system reset (Stanislav Shwartsman) - Implemented SMI and NMI delivery (APIC) and handling in CPU (Stanislav) - Experimental implementation of System Management Mode (Stanislav) - Added emulation of SSE3E instructions (Stanislav Shwarstman) - Save and restore FPU opcode, FIP and FDP in FXSAVE/FRSTOR instructions - Fixed bug in MOVD_EdVd opcode (always generated #UD exception) - Fixed critical issue, Bochs was not supporting > 16 bit LDT.LIMIT values - Many fixes in Bochs internal debugger and disassembler - CPU x86-64 fixes - Fixed SYSRET instruction implementation - Fixed bug in CALL/JMP far through 64-bit callgate in x86-64 mode - Correctly decode, disassemble and execute 'XCHG R8, rAX' instruction - Correctly decode and execute 'BSWAP R8-R15' instructions - Fixed ENTER and LEAVE instructions in x86-64 mode (Stanislav) - Fixed CR4 exception condition (No Name) - Fixed x86 debugger to support x86-64 mode (Stanislav) - APIC and SMP - Support for Dual Core and Intel(R) HyperThreading Technology. Now you could choose amount of cores per processor and amount of HT threads per core from .bochsrc for SMP simulation (Stanislav Shwartsman) - Allow to control SMP quantum value through .bochsrc CPU option parameter. Previous Bochs versions used hardcoded quantum=5 value. - Fixed interrupt priority bug in service_local_apic() - Fixed again reading of APIC IRR/ISR/TMR registers. Finally it becomes fully correct :-) - Configure and compile - Moved configure time --enable-reset-on-triple-fault option to runtime, the 'cpu' option in .bochsrc is extended and the old configure option is deprecated (Stanislav Shwartsman) - Removed --enable-pni configure option, to compile with PNI use --enable-sse=3 instead (Stanislav Shwartsman) - enable SEP (SYSENTER/SYSEXIT) support by default for Penitum II+ processor emulation (i.e. if cpu-level >= 6 and MMX is enabled) - general - Limited save/restore support added. The state of CPU, memory and all devices can be saved now (state of harddisk images not handled yet). - Fixed several memory leaks - configuration interface - Configuration parameter handling rewritten to a parameter tree. This is required for dynamic menus/dialogs, user-defined options and save/restore. - Support for user-defined bochsrc options added - help support at the parameter prompt in textconfig added - I/O devices (Volker) - Floppy - partial sector transfers fixed - Hard drive / cdrom - several fixes to the IDE register behaviour (e.g. in case of a channel with only one drive connected) - fixed data alignment of 'growing' hard drive images (sharing images between Windows and Linux now possible) - disk geometry autodetection now supported by most of the image types (unsupported: external, dll and compressed modes) - multi sector read/write commands implemented - hard disk now reporting ATA-3 supported - ATAPI 'inquiry' now returns a unique device name - Keyboard - reset sent to keyboard has no effect on the 8042 (scancode translation) - PCI - forward PIRQ register changes to the I/O APIC (if present) - attempt to fix and update the emulation part of 'pcidev' (untested) - VGA - VBE memory size increased to 8MB and several VBE fixes - VGA memory read access fixed (bit plane access and read mode) - VGA memory is now a part of the common video memory - System BIOS (Volker) - enable interrupts before executing INT 19h - fixed ATA device detection in case of one drive only connected to controller - improved INT 15h function AX=E820h - real mode PCI BIOS now returns IRQ routing information (function 0Eh) - keyboard LED flags handling fixed and improved - fixed handling of extended keys in INT 09h - Updated LGPL'd VGABIOS to version 0.6a - SF patches applied [1340111] fixes and updates to usb support by Ben Lunt [1539420] minor addition to pci_usb code by Ben Lunt [1455958] call/jmp through call gate in 64-bit mode [1433107] PATCH: fix compile with wxwindows 2.6 (unicode / utf8) by jwrdegoede [1386671] Combined dual core and hyper-threading patch - these S.F. bugs were closed [833927] TTD: System Error TNT.40025: Unexpected processor exception [789230] Sending code that shows lock up when setting idt [909670] Problems with Symantec Ghost [1540241] include missing in osdep.cc [1539373] Incorrect disasm for "mov moffset,bla" in 64bit [1538419] incorrect disassembly of [rip+disp] with rex.b [1535432] shift+cursor key maps to a digit [1504891] Knoopix 5.0.1 error [1424355] bochs-2.2.6 ata failure in windoze 98se [1533979] wrong disassembly of IN instruction [620059] paste won't stop [1164904] status bar doesn't show num/caps/scroll lock status [1061720] ATA Support level for HD [1522196] Broken CHANGES link in main page [1438415] crash if screen scrolled downwards [778441] Shouldn't interrupts be enable after BIOS? [1514949] I got a problem with the 8253 timer [1513544] disasm of 0xec (in AL,DX) returns ilen of 2 instead of 1 [1508947] APIC interrupt priority checking and interrupt delivery [766286] Debugger halts after any GPF exception [639143] va_list is not a pointer on linuxppc [1501815] debugger examines memory over page-boundary wrong [1503978] movsb/w/d doesn't work when direction is stored [1499405] WinPCap has changed URL hosting [1498519] APIC IRR bits not set while interrupts disabled [1498193] Bochs segfaults on LTR instruction [787140] Guest2HostTLB optimization bug [1492070] instrument stop [1487772] No SEP on P4 [1488335] Growing hard disk images severe interoperability errors! [1076312] Shadow RAM and TLB [1282249] The real i440FX chipset Award bios hangs [1479763] mistake "mov ax,[es:di]" for "mov ax,[ds:di]" [1453575] Misconfigured floppy DMA transfers do not terminate. [1460068] Incorrect handling for the Options Menu Item [910203] bochs-2.1.1 wx.lo failed [1438654] PANIC when trying to run install-amd64-minimal-2005.0.iso [1458320] compile hdimage.h fails [1455880] bochs-2.2.6,2: make error on FreeBSD [696890] Network wouldn't run under W2k hosting MSDOS [673391] SMP timer problems [1291059] wxWindows GUI on non-windows/configure issue [1356450] bochs 2.2.1 errors-omittions [1178017] Win98 guest cannot receive network packets from host [1076315] a20_mask after restarting [1436323] real hw does not panic when bad Ib in CMPSS_VssWssIb [1435269] cdrom_amigaos is not compilable [1433314] disasm issues [1170614] relative jumps/calls wrong in debugger [758121] user might get confused when interrupt handler invoked [1170622] You cannot toggle OFF "show" flags [1406387] JMP instruction should display absolute address [1428813] PANIC: ROM address space out of range [1426288] DR-DOSs EMM386 problem [1412036] Bochs cannot recognize PCI NIC correctly [435115] dbg: modebp broken and no docs [1419366] disasm cs:eip does not work anymore [1419393] SSE's #XF exception -> "exception(19): bad vector" [1419429] disassembly of "260f6f00" show DS: instead of ES: prefix [1417583] Interrupt behaviour changed from 2.2.1 to 2.2.5 [1418281] 'push' (6A) incorrectly disassembled [1417791] FLDENV generating exception when real hw does not. [1264583] OS/2 1.1 doesn't run ------------------------------------------------------------------------- Changes in 2.2.6 (January 29, 2006): - First major SMP release ! - several APIC and I/O APIC fixes make SMP Bochs booting Windows NT4.0 or Knoppix 4.0.2 without noapic kernel option in SMP configuration. - critical APIC timer bug fixed - obsolete SMP BIOS images removed (MP tables created dynamicaly) - determine number of processors in SMP configuration through .bochsrc new .bochsrc option 'CPU' allows to choose number of processors to emulate - new configure option --enable-smp to configure Bochs for SMP support, the old --enable-processors=N option is deprecated - CPU and internal debugger fixes - enabled #PCE bit in CR4 register, previosly setting of this bit generated #GP(0) fault - enabled LAHF/SAHF instructions in x86-64 mode - fixed bug in PMULUDQ SSE2 instruction - fixes in Bochs debugger - Configure and compile - enable VME (virtual 8086 mode extensions) by default if cpu-level >= 5 - enable Bochs disassembler by default for all configurations - win32 installer script improvements - ips parameter moved to new 'CPU' option - show IPS value in status bar if BX_SHOW_IPS is enabled - Other - several fixes in the hard drive, keyboard, timer, usb and vga code - new user button shortcut "bksl" (backslash) - updated Bochs instrumentation examples - user and development documentation improved ------------------------------------------------------------------------- Changes in 2.2.5 (December 30, 2005): Brief summary : - added virtual 8086 mode extensions (VME) implementation - several fixes/improvements in x86-64 emulation, debugger and disassembler - new serial mode 'socket' connects a network socket - IDE busmaster DMA feature for harddisks and cdroms completed and enabled - many improvements in Bochs emulated I/O devices (e.g. floppy, cdrom) - Updated LGPL'd VGABIOS to version 0.5d Detailed change log : - CPU - fixed XMM registers restore in FXRSTOR instruction (Andrej Palkovsky) - print registers dump to the log if tripple fault occured - fixed PANIC in LTR instruction (Stanislav) - added virtual 8086 mode extensions (VME) implementation, to enable configure with --enable-vme (Stanislav) - flush caches and TLBs when executing WBINVD and INVD instructions - do not modify segment limit and AR bytes when modifying segment register in real mode (support for unreal mode) - fixed init/reset values for LDTR and TR registers - reimplemented hardware task switching mechanism (Stanislav) - generate #GP(0) when fetching instruction cross segment boundary - CPU (x86-64) (Stanislav Shwartsman) - implemented call_far/ret_far/jmp_far instructions in long mode - fixed IRET operation in long mode - fixed bug prevented setting of NXE/FFXSR bits in MSR.EFER register - implemented RDTSCP instruction - do not check CS.limit when prefetching instructions in long mode - fixed masked write instructions (MASKMOVQ/MASKMOVDQU) in long mode - fetchdecode fixes for x86-64 - APIC - Fixed bug in changing local APIC id (Stanislav) - Fixed reading of IRR/ISR/TMR registers (patch by wmrieker) - Implemented spurious interrupt register (Stanislav, patch by wmrieker) - Fixed interrupt delivery bug (anonymous #SF patch) - Correctly implemented ESR APIC register (Stanislav) - Bochs debugger - Fixed bug in bochs debugger caused breakpoints doesn't fire sometimes (Alexander Krisak) - watchpoints in device memory fixed (Nickolai Zeldovich) - new debug interface to access Bochs CPU general purpose registers with support for x86-64 - Disassembler (Stanislav Shwartsman) - Fixed disassembly for FCOMI/FUCOMI instructions - Full x86-64 support in disassembler. The disassembler module extended to support x86-64 extensions. Still limited by Bochs debugger which is not supporting x86-64 at all ;( - I/O devices (Volker) - general - memory management prepared for large BIOS images (up to 512k) - slowdown timer sleep rate fixed (now using 1 msec on all platforms) - some device specific parameter handlers moved into the device code - serial - new serial mode 'socket' connects a network socket (#SF patch by Andrew Backer) - hard drive / cdrom - assign a unique serial number to each drive (fixes harddrive detection problems with Linux kernels 2.6.x: "ignoring undecoded slave") - geometry autodetection for 'flat' hard disk images added. Works with images created with bximage (heads = 16, sectors per track = 63) - ATAPI command 'read cd' implemented, some other commands improved - cdrom read block function now tries up to 3 times before giving up - emulation of raw cdrom reads added, some other lowlevel cdrom fixes - IDE busmaster DMA feature for harddisks and cdroms completed and enabled - disk image size limit changed from 32 to 127 GB - split ATA/ATAPI emulation code and image handling code - floppy - fixes for OS/2 (patch by Robin Kay) - disk change line behaviour fixed (initial patch by Ben Lunt) - end-of-track (EOT) condition handling implemented - more accurate timing for read/write data and format track commands using a motor speed of 300 RPM - timing of recalibrate and seek commands now depends on the step rate, date rate and the steps to do - floppy controller type changed to 82077AA - cmos - RTC 12-hour and binary mode implemented - number of CMOS registers changed from 64 to 128 - bochsrc option 'cmosimage' improved - save cmos image on exit if enabled - speaker - simple speaker support for OS X added (patch by brianonn@telus.net) - pci - BeOS boot failure fix in the PCI IDE code - don't register i/o and memory regions during PCI probe - vga - memory allocation for vga extensions fixed - usb - some bugfixes by Ben Lunt (mouse and keypad are usable now) - networking modules - VDE networking module now enabled on Linux - display libraries - general - new syntax for the userbutton shortcut string and more keys supported - win32 - fixed keycode generation for right alt/ctrl/shift keys - runtime dialog is now a property sheet - x11 - simple dialog boxes for the "ask" and "user shortcut" feature implemented - Slovenian keymap added (contributed by Mitja Ursic) - configuration interface - ask dialog is now enabled by default for win32, wx and x display libraries - bochsrc option floppy_command_delay is obsolete now (floppy timing now based on hardware specs) - floppy image size detection now available in the whole config interface - some device specific parameter handlers moved into the device code - calculate BIOS ROM start address from image if not specified - System BIOS (Volker) - PCI i/o and memory base address initialization added - several keyboard interrupt handler fixes (e.g. patch by japheth) - several floppy fixes (e.g. OS/2 works with patch by Robin Kay) - some more APM functions added - Updated LGPL'd VGABIOS to version 0.5d - generate SMP specific tables dynamicly by the Bochs memory init code - SF patches applied [1389776] Disk sizes over 64 Gbytes by Andrzej Zaborowski [1359162] disasm support for x86-64 by Stanislav Shwartsman [857235] task priority and other APIC bugs, etc by wmrieker [1359011] build breaks for 386 + debugger + disasm by shirokuma [1352761] Infinite loop when trying to debug a triple exception [1311170] small APIC bug fix (interrupt sent to the wrong CPU) [1309763] Watchpoints don't work in device memory by Nickolai Zeldovich [1294930] change line status on floppy by Ben Lunt [1282033] SSE FXRESTORE not working correctly by Ondrej Palkovsky [816979] wget generalizations by Lyndon Nerenberg [1214886] No more pageWriteStamp / unified icache by H. Johansson [1107945] com->socket redirection support by Andrew Backer - these S.F. bugs were closed [669180] win95 install : unknown SET FEATURES subcommand 0x03 [1346692] bochs 2.2.1 VGA BIOS error [1354963] floppy in KolibriOS [1378204] error: bochs-2.2.1, --enable-sb16, --disable-gameport [1368412] VDE problems in BOCHS [533446] CPU and APIC devices appear twice [1000796] bximage fails to create image of specified size [1170793] Quarterdeck QEMM doesn't work [923704] Multiple opcode prefixes don't reflect Trap 13 [1166392] DocBook/documentation issues [1368239] broken grater than 4GB size of sparse type hd image [1365830] i386 compile breaks on paging [427550] Incomplete IRETD implementation [1215081] MSVC workspace STILL not fixed [736279] Jump to Task [1356488] FD change fail & occur error [957615] [CPU ] prefetch: RIP > CS.limit [1353866] not booting linux-2.6.14 [1351667] load32bitOSImage does not work with --enable-x86-debugger [1217476] Incorrect (?) handling of segment registers in real mode [1184711] OS2 DOS crash [2.2.pre2] [624330] support for disks > 32GiB [1348368] bochs 2.2.1 bximage error [1342081] Configuration Menu option failed [1138616] OS/2 Warp 4 hangs when booting [1049840] mouse and video conflict [1164570] Unable to perform Fedora Core 4 test 1 installation [1183201] Windows 2000 (MSDN build 2150?) does not completely install [1194284] Can't boot from CD-ROM (Windows NT) [962969] Windows NT crashes while trying to intall them. [1054594] WinXP install halts (redo) [1153107] Windows XP fails with BSOD on 'vga' [938518] Win XP installation fails [645420] getHostMemAddr vetoed direct read [1179985] MS XENIX: >>PANIC<< VGABIOS panic at vgabios.c, line 0 [1329600] WBINVD and INVD should flush caches and TLB [638924] eliminate BX_USE_CONFIG_INTERFACE [1048711] Funny behaviour with CTRL [1288450] keyboard BIOS error [1310706] Keyboard - about key SHIFT [1295981] Ubuntu 5.04 Live-CD won't boot in Bochs [879047] APIC timer behavior different before reset and after [1188506] I still can't install the german Windows XP! [1301847] Windows XP dosn't boot - FXRSTOR problem ? [661259] does not boot QNX under WinX [924412] Keyboard lock states all whacked [681127] MIPSpro compiler (IRIX) is allergic to ^M [1285923] BIOS keyboard handler [516639] ATA controller revisited... [657918] does not boot BeOS under WinX [649245] BeOS CD locks halfway on boot [1094385] Attachment for bug 1090339 (beos failure) [1183196] BeOS 4.5 developer CD does not install [1090339] BeOS fails to boot [639484] panics when int 13 is called [711701] divide by zero [704295] ATAPI/BIOS call missing [682856] hard drive problems [627691] Cursor keys problem [588011] keyboard not working [542260] os/2 warp crashes with floppy handling [1273878] SB16 doesn't work in pure DOS [542254] OS/2 FDC driver dies [1099610] Windows 98 SE Does not install [875479] cr3 problem on task switch [731423] NE2000 causing PANIC on Win2K detection [1156155] bochs fails to boot plan9 iso [1251979] --enable-cpu-level=3 should assume --without-fpu [1257538] Interupt 15h 83h - set wait event interval [658396] Panic for DR DOS emm386 [679339] /? doesn't divulge Bochs command-line syntax [1167016] call/jump/return_protected doesn't support x86-64 [1252432] Mac OS X compile bug [881442] Bochs 2.1 PANIC when loading DOS Turbo Pascal protected mode [1249324] Boch2.2.1 Buffer Overfollow in void bx_local_apic_c::init () [1197144] 'make install' has dependency on wget [1079595] LTR:386TSS: loading tr.limit < 103 [1244070] Compilation Error in gui/rfb.cc [761707] CPU error when trying to start Privateer [517281] Crash running Privateer in DOS... ------------------------------------------------------------------------- Changes in 2.2.1 (July 8, 2005): - Fixed several compilation warnings and errors for different platforms (Volker) - Fixed FPU tag word restore in FXRSTOR instruction (Stanislav) - Added missing scancodes for F11 and F12 to BIOS translation table (Volker) - Bochs disassembler bugfixes (h.johansson) - About 5% emulation speed improvement (h.johansson) - Handle writing of zero to APIC timer initial count register (Stanislav) - Enable Idle-Hack for 'TERM' GUI (h.johansson) - Reduced overhead of BX_SHOW_IPS option to minimum. Now every simulation could run with --enable-show-ips without significant performance penalty. (Stanislav) - Fixed pcipnic register access (Volker) - Limited write support for TFTP server in 'vnet' networking module added (Volker) - Changed some timing defaults to more useful values (Volker) - WinXP/2003 style common controls now supported (Vitaly Vorobyov) - Updated LGPL'd VGABIOS to version 0.5c (Volker) - Added new BX_INSTR_HLT callback to instrumentation (Stanislav) ------------------------------------------------------------------------- Changes in 2.2 (May 28, 2005): Brief summary : - New floating point emulator based on SoftFloat floating point emulation library. - improved x86-64 emulation - Cirrus SVGA card emulation added - status bar with indicators for keyboard, floppy, cdrom and disk (gui dependant) - many improvements in Bochs emulated I/O devices (e.g. PCI subsystem) Detailed change log : - CPU - fixes for booting OS/2 by Dmitri Froloff - fixed v8086 priveleged instruction processing bug (was also reported by LightCone Aug 7 2003) - exception process bug (was reported by Diego Henriquez Sat Nov 15 01:16:51 CET 2003) - segment validation with IRET instruction - CS segment not present exception processing with IRET - several fixes by Kevin Lawton - add MSVC host asm instructions (patch by suzu) - fixed bug in HADDPD/HSUBP
Delphi7.1 Update
Delphi 7.1 Update Release Notes=======================================================This file contains important supplemental and late-breakinginformation that may not appear in the main productdocumentation, and supersedes information contained in otherdocuments, including previously installed release notes.Borland recommends that you read this file in its entirety.NOTE: If you are updating a localized version of Delphi 7, visit the Borland Registered User web site to obtain a localized readme file that may contain important late- breaking information not included in this readme file.IMPORTANT: Delphi must be closed before installing this update. =====================================================CONTENTS * INSTALLING THIS UPDATE * UPDATING LOCALIZED VERSIONS OF DELPHI 7 * KNOWN ISSUES * ISSUES ADDRESSED BY THIS UPDATE - IDE - CORE DATABASE - DATASNAP - DBGO (ADO COMPONENTS) - dbExpress - dbExpress COMPONENTS AND DB VCL - dbExpress CORE DRIVER AND METADATA - dbExpress VENDOR ISSUES - dbExpress CERTIFICATION - WEB SNAP - ACTIVEX - COMPILER - RTL - VCL - THIRD PARTY - BOLD FOR DELPHI * VERIFYING THAT THE UPDATE WAS SUCCESSFUL * FILES INSTALLED BY THIS UPDATE =======================================================INSTALLING THIS UPDATE* This update can not be applied to Delphi 7 Architect Trial version. * This update can not be removed after it is installed.* You will need the original Delphi 7 installation CD available to install this update.* To install this update from the CD, insert the CD, and launch the d7_ent_upd1.exe file appropriate for your locale.* To install this update from the Web, double-click the self-executing installation file and follow the prompts. * The Delphi 7 documentation PDF files are available on the update CD.========================================================UPDATING LOCALIZED VERSIONS OF DELPHI 7* This update can be applied only to the English version of Delphi 7. There are separate updates for the German, French and Japanese ver
知行EDI

296

社区成员

311

社区内容

发帖
与我相关
我的任务
社区描述
西安知行软件有限公司官方账号。知行 EDI 社区是一个线上公开交流平台，期待与社区成员，一起探索 EDI 价值！基于知行之桥EDI系统，搭建企业级EDI解决方案，助力企业整合供应链、降低库存等。
中间件网络协议团队开发 企业社区 陕西省·西安市
社区管理员
  • 知行EDI
  • 知行EDI顾问Alisa
加入社区
  • 近7日
  • 近30日
  • 至今

加载中

查看更多榜单
社区公告
暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章