社区
下载资源悬赏专区
帖子详情
test-toolbutton测试代码下载
weixin_39822095
2023-11-18 23:30:23
test-toolbutton测试代码 , 相关下载链接:
https://download.csdn.net/download/m0_46577050/88498908?utm_source=bbsseo
...全文
浏览
回复
打赏
收藏
test-toolbutton测试代码下载
test-toolbutton测试代码 , 相关下载链接:https://download.csdn.net/download/m0_46577050/88498908?utm_source=bbsseo
复制链接
扫一扫
分享
转发到动态
举报
写回复
配置赞助广告
用AI写文章
回复
切换为时间正序
请发表友善的回复…
发表回复
打赏红包
test
-
tool
button
测试代码
test
-
tool
button
测试代码
test
-
tool
button
.rar qt 测试
tool
button
代码
test
_
tool
button
.rar qt 测试
tool
button
代码
基恩士条码枪
基恩士条码枪设置,加载直接使用COGNEX DM3V Verify SOP-Woodland Online V1.0 2 | Confidential © 2013 Cognex Corporation 硬件清单-Hardware list DM3V Verifier 1 根 light cable Ethernet Stand cable Power cable 红色低角度环光-Low Angle Red Ring Light 2X远心镜头 2X Telecentric Lens 3 | Confidential © 2013 Cognex Corporation 连接相机,镜头和线缆 Connecting camera, lens and cables 连接相机和镜头,旋转到位。连接三条电缆到相机上,如上图,从上 到下分别是以太网电缆、光源电缆和供电电缆。 Connect the lens to the camera firm. Connect 3 cables to the camera shown as the above image. From the top to bottom, they are Ethernet cable, lighting cable and power supply cable. 4 | Confidential © 2013 Cognex Corporation 固定镜头光圈- Fix lens aperture 置 固定镜头光圈到指定位置 - Fix lens aperture to required position 并锁紧光圈锁 - Tightening aperture lock 5 | Confidential © 2013 Cognex Corporation 调整相机和光源的高度 Adjust camera and light height 安装相机和光源时,保证它 们要同轴(+/-3mm) ,并且和 码的高度相同。当拍照时, 代码应该在图像的较中心的 位置。 Keep the camera and the light are coaxial (+/-3mm) when mounting on the machine. Their center should be at the same height as the code. When capture an image, the code should be around the image center. 6 | Confidential © 2013 Cognex Corporation 调整相机和光源工作距离 Adjust camera and light working distance 镜头右端面距离代码表面约为75mm, , 光源右端面距离产品约为10mm 。 。 如上图所示 。这些距离会由支架来保证 The distance between lens right end face and code surface is 75mm. The distance between light right end face and code surface is 10mm. Shown as the above image. Bracket designed has taken this in the design 10mm 75mm 7 | Confidential © 2013 Cognex Corporation 供电电缆 Power supply cable 8 | Confidential © 2013 Cognex Corporation 连接相机电源和RS232通讯 Connect the power and RS232 connection TxD RxD 24V DC GND 24V 0V 红(Red) 黑(Black) 棕(Brown) 白/黄(White/Yellow) 按照下图来连接电源和RS232 通讯。 Connect the power and RS232 communication according to below diagram. 9 | Confidential © 2013 Cognex Corporation 软件安装-Software Installation 求 系统需求 System Requirements The PC you use must meet the minimum hardware and software requirements. At least 600MB free disk spac
【乌拉喵.教程】编写
Test
Bench,quartus与modelsim时序仿真
假设现在已经写好了一个电路vhdl,编译也没问题了,什么都没问题了,就差仿真了。 设置
test
bench语言 这里使用Verilog语言,因为从网上看的,说VHDL的
test
bench比较难,所以这里就用Verilog吧,确认。 生成
test
bench 点击之后,quartus会自动生成以.vt为扩展名的
test
bench文件。 添加
test
bench文件到工程中 找到
button
.vt添加工程中,现在
test
bench就是这个.vt文件了。 编译工程 调用modelsim仿真
android studio instrumentation
test
case,Android Studio单元测试 Instrumentation框架-Espresso UI测试...
这里也有eclipese的配置,详情参考eclipese单元测试参考文档官网关于Espresso的学习链接Android Studio 1.5创建的工程,会生成两个默认的测试目录:
test
,android
Test
,其中,
test
目录为在本机执行单元
测试代码
的目录, android
Test
为在Android设备上执行单元
测试代码
的目录。目录如下图所示:右击 android
Test
目录下的 Appl...
下载资源悬赏专区
12,447
社区成员
11,907,155
社区内容
发帖
与我相关
我的任务
下载资源悬赏专区
CSDN 下载资源悬赏专区
复制链接
扫一扫
分享
社区描述
CSDN 下载资源悬赏专区
其他
技术论坛(原bbs)
社区管理员
加入社区
获取链接或二维码
近7日
近30日
至今
加载中
查看更多榜单
社区公告
暂无公告
试试用AI创作助手写篇文章吧
+ 用AI写文章