怎样将Peer Web Services 2.0升到3.0?

zgz2000 2000-05-30 03:14:00

小弟用的是NT 4.0 Workstation(service pack 6),最近装了一个Peer Web Services 2.0，故Visual InterDev 6.0无法工作，听说3.0支持ASP功能，请问如何安装或升级为Peer Web Services 3.0? please mailto zgz@eastcom.com! Thanks.

...全文

81 回复打赏收藏转发到动态举报

写回复

回复

切换为时间正序

请发表友善的回复…

发表回复

诊断是HCIE考试中重要的一板块，本课程围绕这一板块进行讲解，其中范文展示如下：关于“AR29 loopback 0不能访问AR28 loopback0”的诊断报告一、故障根因。经过分析，“AR29 loopback 0不能访问AR28 loopback0”的原因是，LSW6连接AR29和AR28的接口错误划分进不同的vlan，导致AR29和AR28不在一个广播域。二、故障分析。步骤2-1：故障现象重现，AR29使用loopback0作为源IP地址去ping AR28的loopback0,命令： ping -a 10.5.1.29 10.5.1.28 PING 10.5.1.28: 56 data bytes, press CTRL_C to break Request time out Request time out Request time out Request time out Request time out --- 10.5.1.28 ping statistics --- 5 packet(s) transmitted 0 packet(s) received 100.00% packet loss 上面结果表明，确实存在故障，由于AR29和AR28之间运行OSPF协议，所以下一步将在AR29进一步查看路由表以确定是否存在AR28 loopback0接口的ip地址的路由信息。步骤2-2：在AR29上检查路由表，以确定是否存在AR28 loopback0接口的ip地址的路由信息。查看命令及结果如下： display ip routing-table Route Flags: R - relay, D - download to fib------------------------------------------------------------------------------Routing Tables: Public Destinations : 12 Routes : 12 Destination/Mask Proto Pre Cost Flags NextHop Interface 10.5.1.29/32 Direct 0 0 D 127.0.0.1 LoopBack0 10.5.1.33/32 OSPF 10 1 D 10.5.233.33 GigabitEthernet0/0/1 10.5.128.0/24 Direct 0 0 D 10.5.128.29 GigabitEthernet0/0/0 10.5.128.29/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/0 10.5.128.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/0 10.5.233.0/24 Direct 0 0 D 10.5.233.29 GigabitEthernet0/0/1 10.5.233.29/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/1 10.5.233.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/1 127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0 127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0 上面结果表明，AR29没有去往AR28 loopback0的路由。所以下一步将检查AR29和AR28的OSPF邻居关系。步骤2-3：在AR29上检查AR29和AR28的OSPF邻居关系。检查命令及结果如下： display ospf peer brief OSPF Process 1 with Router ID 10.5.1.29 Peer Statistic Information ---------------------------------------------------------------------------- Area Id Interface Neighbor id State 0.0.0.2 GigabitEthernet0/0/1 10.5.1.33 Full ---------------------------------------------------------------------------- 上面结果表明，AR29与AR28不存在OSPF邻居关系。所以初步判断OSPF配置错误，需要进一步检查确认。步骤2-4：由于AR27与AR28 AR29处于同一OSPF区域中，所以可以通过AR27的测试结果来判断AR28配置是否正确，测试及结果如下：[AR27]display ospf peer brief //查看OSPF邻居 OSPF Process 1 with Router ID 10.5.1.27 Peer Statistic Information ---------------------------------------------------------------------------- Area Id Interface Neighbor id State 0.0.0.0 GigabitEthernet0/0/0 10.5.1.28 Full ----------------------------------------------------------------------------[AR27]dis ip routing-table | in 10.5.1.28 //查看OSPF路由Route Flags: R - relay, D - download to fib------------------------------------------------------------------------------Routing Tables: Public Destinations : 19 Routes : 19 Destination/Mask Proto Pre Cost Flags NextHop Interface 10.5.1.28/32 OSPF 10 1 D 10.5.128.28 GigabitEthernet0/0/0 [AR27] 上面结果表明，AR27与AR28之间正常建立OSPF邻居，并且AR27能学习到AR28 loopback0的路由，说明AR28的OSPF配置正确，下一步将对比AR27与AR29的OSPF配置，来进一步判断AR29的OSPF配置是否正确。步骤2-5：在AR27和AR29上使用命令display ospf brief检查对比AR29的OSPF配置是否正确，结果如下：[AR27]dis ospf brief //查看AR27 OSPF协议简要信息 OSPF Process 1 with Router ID 10.5.1.27 OSPF Protocol Information RouterID: 10.5.1.27 Border Router: ......(此处省略部分内容) Area: 0.0.0.0 (MPLS TE not enabled) Authtype: MD5 Area flag: Normal SPF scheduled Count: 15 ExChange/Loading Neighbors: 0 Router ID conflict state: Normal Area interface up count: 3.......

Questions or comments for Tim about this article? Ask them here. You must be logged in to the OReilly Network to post a talkback. Showing messages 1 through 137 of 137.

http://www.ibm.com/developerworks/web/library/wa-aj-web2jee/?S_CMP=cn-a-wa&S_TACT=105AGX52 Summary: Web 2.0 applications developed using standard Java™ Platform, Enterprise Edition 5 (Jav...

28,390

社区成员

357,068

社区内容

发帖

与我相关

我的任务

社区管理员

加入社区

近7日
近30日
至今

加载中

查看更多榜单

社区公告

暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章