Directory Listing For / Filename Size Last Modified

hy2003fly 2005-11-10 12:14:15
我下载了一个lomboz-eclipse-emf-gef-jem-3.1RC2.zip,解压后按照http://blog.csdn.net/rickhunterchen/archive/2005/09/11/477386.aspx
的步骤来做,一直到Run on Server才出错。
出错信息如下:
http://localhost:8080/Test/

Directory Listing For /

--------------------------------------------------------------------------------
Filename Size Last Modified

--------------------------------------------------------------------------------
Apache Tomcat/5.0.28

改成
http://localhost:8080/Test/test.jsp
出错信息如下:

HTTP Status 404 - /test.jsp

--------------------------------------------------------------------------------

type Status report

message /test.jsp

description The requested resource (/test.jsp) is not available.


--------------------------------------------------------------------------------

Apache Tomcat/5.0.28

望各位仁兄指点一下迷津,先谢了。

...全文
302 2 打赏 收藏 转发到动态 举报
写回复
用AI写文章
2 条回复
切换为时间正序
请发表友善的回复…
发表回复
hy2003fly 2005-11-10
  • 打赏
  • 举报
回复
第一次出错为右击工程->Run On Server出现的错误,在浏览器的地址为http://localhost:8080/Test/

但是我觉得可能是这个地址出错,所以改成http://localhost:8080/Test/test.jsp
刷新就出现了第二次的出错信息。
「已注销」 2005-11-10
  • 打赏
  • 举报
回复
找不到页面啊...你的WEB应用根本就没有发布吧
v3.17 * updated libFLAC to version 1.2.1 * added a flush after every log line to help GUIs * "eac3to some.mpls" now also works if the stream files aren't there, anymore * fixed: number of subtitles was not appended to demuxed subtitles' file name * fixed: dialnorm removal (for Nero decoder) failed with some 2.0 TrueHD files v3.16 * added undocumented "-no2ndpass" switch to turn off 2nd pass processing * fixed: two pass processing sometimes produced superfluous sup files * fixed: MPG/EVO/VOB audio tracks with "PES extension 2" were not detected * fixed: very small W64/RF64 files were not detected correctly * fixed: when processing was aborted, log file was sometimes not created * fixed: sometimes specifying a title number addressed the wrong HD DVD title v3.15 * "24.975" is now interpreted as "25.000/1.001" * Blu-Ray "sup" are demuxed with DTS set to 0 again, proper fix will come later * fixed: error code not set for "source file format could not be detected" * fixed: audio resampling from/to 24.975 didn't work properly * fixed: WAV files beginning with lots of zeroes were sometimes not accepted v3.14 * WAV reading was broken for all but very small files (introduced in v3.13) v3.13 * fields and frames are counted and displayed separately now * added DIRAC bitstream parser * added support for "-24.975" and "-changeto24.975" * Blu-Ray subtitle demuxing: PTS value is now written to both PTS + DTS * joining MKV files is now declined with a proper error message * last chapter is now removed, if it's less than 10 seconds from end of movie * fixed: "-normalize" didn't work with stdout, anymore * fixed: audio delay was incorrect when 1st m2ts part contained no audio data * fixed: very small WAV files were not detected correctly * fixed: "eac3to source.eac3 dest.dts -core" crashed v3.12 * fixed: track languages for HD DVD discs were not shown * fixed: MLP channel order was wrong for some specific channel configurations * fixed: "DirectShow reported 255 channels" happened sometimes v3.11 * fixed: MKV subtitle track language wasn't shown v3.10 * Blu-Ray title listing now includes chapter information * fixed: v3.09 didn't show track languages for Blu-Rays v3.09 * added support for MKV "SRT/UTF8", "SRT/ASCII", "ASS" and "SSA" subtitles * increased some internal buffers to avoid AC3 overflow in the "thd ac3 joiner" * fixed: frame counting didn't work for MKV video tracks * fixed: video track FPS change was sometimes declined * fixed: video tracks with "strange" FPS were sometimes handled incorrectly * fixed: clipping removal 2nd pass was executed even for "stdout" * fixed: "eac3to -test" displayed an outdated Nero download link * fixed: specifying a specific playlist still used default playlist's chapters v3.08 * fixed: reading physical disc speed was abysmal (introduced in v3.07) * fixed: read error from physical drive resulted in crash v3.07 * added support for MKV video tracks without sequence headers in bitstream * added support for old style MKV AAC tracks * added support for various MKV "A_MS/ACM" audio formats * added support for various MKV "V_MS/VFW/FOURCC" video formats * added warning for tracks where bitstream parsing failed * demuxing a video track now also complains about video gaps/overlaps * the "-check" option now also complains about video gaps/overlaps * optimized memory allocation * fixed: adding subtitle caption count to filenames sometimes didn't work * fixed: subtitle caption counts in log sometimes had wrong track numbers * fixed: all non-supported MKV tracks shared the same description * fixed: incorrect framerate mismatch complaint was shown for pulldown sources * fixed: FLAC tracks in MKV files don't slow down detection, anymore * fixed: source file detection read 300MB from every source file v3.06 * added MKV reading/parsing support * added demux support for MKV (E-)AC3, DTS(-HD), AAC, MPx, FLAC and WAV tracks * added demux support for MKV "modern style" MPEG2, VC-1 and h264/AVC tracks * reading from (HD) DVD and Blu-Ray drives uses different reading APIs now * empty tracks in TS/m2ts container are not listed, anymore * for 24.000 fps video tracks a little warning is displayed now * when demuxing subtitle files, the number of captions is added to the filename * timestamp derived FPS is used for gap checking instead of video bitstream FPS * fixed: 44.1khz AC3 encoding was still broken * fixed: zero byte stripping pass was done for true 24bit TrueHD tracks * fixed: downconverting WAV files with 0x3f channel mask didn't work * fixed: log output "remaining delay [...]" was sometimes wrong for AC3 tracks * fixed: silent frame creation was tried for E-AC3 although it can't work v3.05 * warning is shown if h264 video bitstream contains "full range" flag * h264 video bitstream "full range" flag is automatically removed * you can disable removal of the "full range" flag by doing "-keepFullRange" * added reader for external DVD, HD DVD and Blu-Ray SUP files * external SUP files can be delayed now * number of HD DVD and DVD subtitles in SUP track is counted and displayed * number of forced and non-forced Blu-Ray subtitles in SUP track is displayed * "-check" option now also works for demuxed audio, video and subtitle tracks * when reading from physical disc drive, 2KB (instead of 1MB) blocks are read * improved automatic skipping over damaged first 5MB of TS/m2ts files * fixed: resampling and Surcode encoding didn't work in one step * fixed: TRP detection crashed * fixed: track listing sometimes contained tracks without description * fixed: h264 with missing framerate in 1st sequence header made eac3to crash * fixed: some AC3WAV files were not detected correctly * fixed: video frame count was not displayed when 2nd pass was executed v3.04 * video track framerates are now shown with up to 3 decimals, if necessary * m2ts/TS framerate is determined by interpreting video track timestamps * m2ts/TS framerate is displayed in the format description (if available) * warning is shown if container timestamps don't match video framerate * warning is shown if video bitstream has a non-standard framerate * video without framerate information: container framerate is used * video without framerate information: framerate can be set (e.g. "-23.976") * video without framerate information: new framerate is written to bitstream * remaining non-fixed audio delay is now shown in log * command prompt colors are restored after eac3to has run through * fixed: 2-pass processing for stripping zero bytes sometimes crashed * fixed: CA (Conditional Access) tracks were shown as "Unknown audio track" v3.03 * fixed: MPEG2 1088 to 1080 cropping was still incomplete v3.02 * fixed: VC-1 stream handling was broken * fixed: destination file extension "*.lpcm" didn't work with 2pass processing * fixed: MPEG2 1088 to 1080 cropping was incomplete * fixed: no log was being created when "temp file could not be interpreted" v3.01 * fixed: m2ts LCPM demuxing didn't work with v3.00 * fixed: TrueHD -> TrueHD+AC3 conversion didn't work with v3.00 v3.00 * broken AC3, DTS, AAC and MPx streams are now automatically repaired * errors in TS/m2ts files are now reported (with runtime) and ignored * damaged first max 5MB and max 5% of a TS/m2ts file are automatically skipped * video/audio tracks which can't be parsed, are now demuxed in raw form * added support for "line 21" closed captions in ATSC/NTSC broadcasts and DVDs * added reading of movie / network name from "line 21" XDS information * for gaps, edits & repairs > 1000ms eac3to now inserts silence by default * for gaps, edits & repairs < 1000ms eac3to now loops audio by default * option "-silence" forces eac3to to insert silence instead of looping audio * option "-loop" forces eac3to to loop audio instead of inserting silence * newly encoded AC3 frame is now used for "silence" instead of file's 1st frame * increased reading block size (might improve reading performance) * optimized TS/m2ts demuxing performance * optimized MPEG2, VC-1 and h264 parsing performance * command line output is colored now (e.g. errors drawn in red) * MPEG2 1920x1088 bitstream is now automatically patched/cropped to 1920x1080 * log file now contains "ING>" and "" indicators * workaround for movie playlists which want the same m2ts file played twice * added version check for eac3to (doh!) * when a read error occurs, reading is tried again up to 3 times * (E-)AC3 frames with -0db dialnorm are now automatically patched to -31db * updated to newer libAften build -> fixes 44.1khz encoding * fixed: sometimes "The last DTS frame is incomplete" was a false alarm * fixed: mkvtoolnix version check didn't work, anymore * fixed: errors were meant to be output to stderr, but they weren't * fixed: automatic gap/overlap fixing with AAC targets aborted processing * fixed: positive edit began a bit too early * fixed: two ID3 tags after each other made eac3to fail detecting the format * fixed: some VOB files were not detected properly v2.87 * fixed: negative edit was done too late (introduced in v2.86) v2.86 * fixed: "1:some.ac3" instead of "1: some.ac3" failed for 2 digit track numbers * fixed: "eac3to source movie.mkv" demuxed video instead of muxing to MKV * negative edit now begins at the specified runtime instead of ending there v2.85 * using "eac3to source video.h264" doesn't demux audio/subtitle tracks, anymore * using "eac3to source movie.*" demuxes video, audio and subtitle tracks * using "eac3to source 1: video.* 2: audio.*" demuxes the specified tracks * AC3 and E-AC3 dialnorm removal now uses "-31db" instead of "-0db" * workaround for DTS files where last byte is missing in each audio frame * fixed: v2.84 sometimes crashed when parsing HD DVD XML files * fixed: v2.84 sometimes chose incorrect XML file * fixed: v2.84 sometimes chose wrong m2ts playlist file * fixed: some actions were eventually applied twice when "-2pass" was used * fixed: AAC encoding quality "quality=0.0x" was passed to Nero as "0.x" v2.84 * fixed: 2nd pass gap removal was tried (and failed) for TrueHD+AC3 targets * fixed: processing aborted when trying to fix gaps in PCM destination files * fixed: more than one RAW/PCM overlaps resulted in lost sync (since v2.81) * fixed: demuxing TrueHD+AC3 stream by title number didn't renew the AC3 part * new option for removing or looping audio data, e.g. "-edit=0:20:47,-100ms" * title sorting criteria changed: resolution is more important than runtime * new option "-lowPriority" sets eac3to to background/idle priority * libav warnings are now assigned to the affected audio track * fixed: "lossless check failed" false alarms for seamless branching movies * fixed: spike removal filter was not active for the very last overlap/gap * improved muxing h264 streams which begin with double sequence headers * source files are now opened with "share read + write access" * destination files are now opened with "share read access" v2.83 * fixed: gap/overlap correction didn't work for FLAC and WAV files * fixed: when clipping was detected, 2nd pass was not always executed correctly v2.82 * fixed: sometimes eac3to stalled before processing (introduced in v2.81) v2.81 * audio gap/overlap fixing is now automatically done in a 2nd pass * option "-normalize" maximizes the volume of the audio data, needs 2 passes * audio clipping is detected and automatically removed in a 2nd pass * "-2pass" activates 2 pass mode (can speedup seamless branching processing) * superfluous zero bytes are now automatically removed in 2nd pass * "-phaseShift" shifts surround channel phase by 90?for DPL II downmixing * spike removal post processing filter now always produces 16bit samples * empty channels are now reported by the bitdepth analyzer as "no audio data" * option "-shutdown" shuts the PC down automatically after processing is done * the HD DVD XPL with the longest title is now loaded instead of VPLST000.XPL * eac3to can now open selected XPL files (e.g. "eac3to ADV_OBJ\VPLS002.XPL") * eac3to can now open selected mpls files (e.g. "eac3to PLAYLIST\00002.mpls") * fixed: TrueHD streams starting with a non-major header failed to decode * fixed: WAV files created by eac3to with empty channels had incorrect header * fixed: RAW/PCM gap/overlap remover sometimes didn't work correctly v2.80 * fixed: FLAC files with missing runtime information were not accepted * gone back to old VOB/EVO auto delay calculation method, more reliable for me * improved TS broadcast audio delay detection * added support for constant bitrate AAC encoding * added support for AAC encoding 0.00 and 1.00 quality v2.79 * improved m2ts file joining overlap detection (mainly for interlaced video) * vob/evo audio delay detection now uses "vobu start presentation time" * program streams which are neither VOB nor EVO are now reported as "MPG" * resampling is now automatically activated for AC3/DTS encoding, if necessary * "Mersenne Twister" random number generator is used for dithering now * zero padded DTS tracks are now displayed as such * fixed: 32bit PCM conversion to floating point was broken * fixed: with some (rare) movies first subtitle began after 50 minutes runtime * only plugins with the extension *.dll are loaded now v2.78 * fixed: h264 interlaced muxing to MKV could result in too long runtime * fixed: transcoding DTS-HD/E-AC3 core sometimes failed to work correctly * improved TS/m2ts audio delay detection * added filter to remove spikes when fixing gaps/overlaps in RAW/PCM audio * each eac3to instance has its own log file now * playlist output now also works with "-log" option * default bitrate for mono & stereo AC3 encodes lowered to 448kbps * default bitrate for mono & stereo DTS encodes lowered to 768kbps * it should be possible to handle TsSplitter splitted TS files via "+" now v2.77 * pcm/raw audio delay is now applied before resampling and fps change * parsing of command line with multiple sources files sometimes failed v2.76 * "-slowdown" now works to convert 24.000 movies to 23.976 * "-speedup" now works to convert 24.000 movies to 25.000 * option "-xx.xxx" (e.g. "-24.000") sets the FPS of the source track * option "-changeToXx.xxx" (e.g. "-changeTo23.976") changes video/audio FPS * modified FPS information is written to video bitstream (VC-1, MPEG2, h264) * demuxing with FPS change option now activates audio track transcoding * SSRC resampling parameters modified slightly to reduce steepness and ringing * fixed incorrect h264 movie slowdown gap/overlap complaints * fixed DTS-HD High Resolution bitrate calculation * dithering is now done differently per channel v2.75 * added (E-)AC3 5.1 "EX" detection * added (E-)AC3 2.0 "Surround" detection * added (E-)AC3 2.0 "Headphone" detection * NeroAacEnc is now fed with up to 32bit float (if available) * resampling option "-quality=low|high|ultra" not supported, anymore * new option "-fast" switches SSRC resampler to fast, but low quality mode * new option "-r8brain" forces use of r8brain resampler instead of SSRC * added support for AES3 PCM streams in TS container * started working on encoder plugin interface v2.74 * "-demux" failed to work for DTS-HD and "TrueHD/AC3" tracks in v2.73 * fixed: DTS-HD tracks could make processing abort at the very end of the movie v2.73 * changed TS demuxing logic to make the broken (!) new SkyHD broadcasts work * DTS core and "TrueHD/AC3" AC3 parameters are displayed separately now * when using "-core" option, eac3to now bases its decisions on core parameters * added WAV/W64/RF64 read/write support for 32bit PCM and 32/64 bit float * option "-full" allows WAV/W64/RF64 output to be native (default <= 24bit PCM) * Surcode DTS encoding is now done with up to 32bit float (if available) * Aften AC3 encoding is now done with up to 64bit float (if available) v2.72 * fixed: per channel bitdepth analyzation didn't work correctly v2.71 * fixed: v2.70 detected Blu-Rays as "TS" without chapters and track languages * fixed: TrueHD downmixing to 2.0 didn't work v2.70 * added floating point support to the complete audio processing chain * added gain functionality, e.g. "-3db" or "+1db" * bitdepth analyzation is now done separately for each channel * fixed: when decoding lossy audio with libav, peaks were clipped incorrectly * fixed: libav MP1/2/3 decoder output was cut down to 24bit * fixed: with some EVO sources the AC3 track was not listed * fixed: if no key frame was found, h264 track in m2(ts) was not listed * fixed: video/audio data before first PAT/PMT was discarded * Blu-Ray chapters now don't contain link points, anymore, unless necessary * added 10db boost to LFE channel, when "-down2" and "-mixlfe" are used * ArcSoft output can now be overwritten to "-2", "-6", "-7" or "-8" channels v2.69 * added high precision SSRC resampler * resampling "-quality" now allows "low", "high" (SSRC) or "ultra" (r8brain) * resampling quality now defaults to "high" (SSRC) * bitdepth is now analyzed separately for original vs. processed data * fixed: downmixing 16 bit DTS tracks to 5.1 or 2.0 didn't work * fixed: Sonic Decoder was incorrectly assumed to decode XXCh DTS files to 6.1 * for movies the Haali Muxer can't handle "-seekToIFrames" is suggested now v2.68 * fixed crash when transcoding Blu-Ray/HD DVD track to FLAC v2.67 * information about HDCD and real bitdepth is now stored into FLAC metadata * information about real bitdepth is now read from FLAC metadata * PTS break: PTS is increased by 1 frame (fixes some false overlap warnings) * fixed: video gap log text was sometimes not correct (runtime information) * added undocumented switch "-neroaacenc="c:\whatever\neroaacenc.exe"" * error log messages are now output to stderr instead of stdout * improved "which mkvtoolnix is currently installed?" check * fixed: mkvtoolnix version check "Oct" date was not interpreted correctly v2.66 * changed eac3to to allow AAC encoding with 7.1 channels (for new Nero encoder) * fixed AGM creation for files bigger than 4GB * added support for Nero's new AAC Encoder download URL * lowered volume of error/success sounds * when there are 2 similar playlists the one with less chapters is ignored now v2.65 * automatic channel remapping for 6.1 tracks with wrong channel mask * automatic channel remapping for ArcSoft DTS decoder 6.1 tracks * fixed: TrueHD -> Surcode encoding didn't work, anymore * fixed: MPEG2 + h264 video gap/overlap removal didn't work properly v2.64 * added channel mask reading support to Blu-Ray PCM track parser * added channel mask reading support to TrueHD parser * added channel mask reading & writing support to FLAC decoder / encoder * changed 5.x channel mask from $03x to $60x * changed 6.x channel mask from $13x to $70x * mono wavs output now creates correct names for some channel masks * when transcoding 6.1 sources to PCM, 7 channel doubling is activated now * fixed: DTS channelmask detection was incorrect for very strange configs * fixed: sometimes the h264 video stream of a Blu-Ray m2ts was not detected v2.63 * fixed: incorrect detection of 6.0 DTS tracks as 5.0 * fixed: incorrect libav DTS channel remapping for 6.x or 7.x tracks * fixed: incorrect ArcSoft DTS channel remapping for "6.0" and "2/2.1" tracks * fixed: v2.61+62 incorrectly decoded 16bit TrueHD tracks to 24bit FLAC/WAV/RAW * fixed: some DTSWAV files made HDCD decoder crash * fixed: DTSWAV and AC3WAV samplerate and bitdepth were reported incorrectly * improved DirectShow channel configuration reporting * undocumented option -progressnumbers now outputs "analyze:" and "process:" v2.62 * fixed: downmixing 16 bit 7.1 DTS tracks to 5.1 stopped working in v2.61 v2.61 * option "-no7doubling" is not supported anymore * option "-double7" added which upconverts 6.1 to 7.1 * added read/write support for Sony wave64 (*.w64) format * added read/write support for RF64 wave64 (*.rf64) format * added write support for AGM format * true bitdepth (e.g. 18 bits) is written to extensible wav header now * when reading 16/24 (true/storage) WAV files, zero bytes are stripped now * added HDCD detection for WAV and FLAC files * added HDCD detection for PCM tracks in VOB/EVO/m2ts containers * added HDCD decoder written by Christopher Key * added new option "-decodeHdcd" to decode HDCD information * HDCD track -> lossy format: HDCD decoding is automatically activated * when DTS-MA and TrueHD tracks are decoded, a check for HDCD is done * fixed some incorrect DTS channel masks * added automatic libav DTS channel remapping * added automatic ArcSoft DTS channel remapping * added channel map manipulation to make funny DTS tracks decode with Sonic * added channel map manipulation to make funny DTS tracks decode with ArcSoft * added channel volume modification to undo ArcSoft mono surround splitting * for TrueHD+AC3 creation AC3 delay and gap correction are disabled now * fixed: DTSWAV and DTSAC3 readers reported too long runtime * fixed: sometimes processing aborted with a "bitdepth reducer" complaint v2.60 * fixed: in v2.59 "-analyzeBitdepth" stopped working for Blu-Ray TrueHD tracks v2.59 * extension ".thd+ac3" is supported now to define destination format * TrueHD tracks without AC3 core can be converted to TrueHD/AC3 now * demuxing a single-part Blu-Ray title keeps the original "TrueHD/AC3" data * demuxing a multi-part Blu-Ray title automatically redoes the AC3 substream * added workaround for Blu-Ray playlists with multiple last "invalid" parts * fixed: "-check" didn't work for LPCM tracks v2.58 * h264 parser rewritten: framerate, pulldown etc is detected reliably now * h264 pulldown is automatically removed from progressive movie sources now * h264 pulldown removal can be disabled by using "-keepPulldown" * h264 muxing now fully supports streams with mixed 23.976 and 29.970 content * h264 1920x1088 bitstream is now automatically patched/cropped to 1920x1080 * h264 filler data is now already removed during demuxing * h264 sources with funny framerates (e.g. Luxe.tv HD) are patched to 25fps now * mixed video/movie h264 streams are now always muxed with 29.970 timestamps * speedup/slowdown now changes framerate information in the h264 bitstream * options "-24p", "-60i" and "-30p" are no longer supported * fixed Blu-Ray seamless branching subtitle remuxing * added workaround for Blu-Ray playlists with a last small "invalid" m2ts part * bitdepth analyzation is now done for decoded FLAC, WAV, PCM, DTS MA, too * bitrate is now also reported for FLAC, WAV and PCM tracks * when encoding AC3, DTS or AAC, the encoding bitrate is reported * fixed: v2.57 incorrectly decoded 16bit TrueHD tracks to 24bit FLAC/WAV/RAW * (M2)TS discontinuities before the first unit start are ignored now * new option "-progressnumbers" replaces progress bar with percentage numbers v2.57 * added automated support for Nero AAC command line encoder * added "quality=0.xx" (0.00 - 0.99) parameter to control AAC encoder quality * added Nero AAC encoder check to the "-test" list * "-test" checks whether a new Haali Matroska Muxer version is available * "-test" checks whether a new MkvToolnix release build is available * "-test" checks whether a new MkvToolnix beta build is available * "-test" checks whether a new Nero AAC encoder version is available * added TRP container support (TS files without PMT/PAT) * parameter "-extensible" is no longer supported (it's default now) * new parameter "-simple" can be used to disable the "-extensible" wav header * decoded TrueHD tracks: bitdepth is now automatically analyzed in more detail * option "-analyzeBitdepth" manually activates extended bitdepth analyzation * DVB subtitle tracks are listed now - can't be demuxed, though * option "-check" doesn't fail on DTS Express tracks, anymore v2.56 * fixed: processing aborted when a VC-1 sequence end code was found v2.55 * AAC bitstream parser added * AAC auto detection added * AAC bitstream delay added * AAC bitstream gap/overlap correction added * AAC decoding (Nero & Sonic) added * old MP2 parser now "officially" and properly supports MP1, MP2 and MP3 * MP3 decoding (libav & Nero) added * added support for MPEG Audio version 2 and version 2.5 * added (limited) support for ID3, APE and LYRICS tags in MP3 and AAC tracks * improved VOB/EVO audio delay detection algorithm * detection and automatic skipping of invalid vob units * options "-60i" and "-24p" are no longer supported for MPEG2 video * improved detection of MPEG2 framerate / pulldown state / mode * improved MPEG2 muxing warnings * several bugs in MPEG2 video muxing fixed * fixed interlaced VC-1 muxing with user data (Nine Inch Nails) v2.54 * VC-1 pulldown removal rewritten (comparable to vc1conv 0.4, but faster) * VC-1 pulldown removal is activated by default * VC-1 pulldown removal can be manually deactivated by "-keepPulldown" option * VC-1 pulldown removal is also available and activated when muxing to MKV now * fixed Blu-Ray subtitle demuxing for seamless branching movies * better task separation when doing multiple operations with an audio track v2.53 * Blu-Ray PGS subtitle demuxing support added * added support for EVO/VOB subtitles which begin very late in the file * MPEG2 video muxing doesn't rely on GOP headers, anymore * all (M2)TS discontinuities are now reported with exact file position * fixed: reading language information from TS files didn't work correctly v2.52 * fixed muxing of MPEG2 broadcasts where "temporal_reference" overruns * MPEG2 bitstream headers are now updated correctly when speedup is performed * MPEG2 bitstream headers are now updated correctly when slowdown is performed * MPEG2 bitstream headers are now updated correctly when pulldown is removed * pulldown removal is now automatically disabled for MPEG2 broadcasts * AC3WAV (SPDIF formatted) support added v2.51 * DTS Express bitstream parser added * DTS Express auto detection added * DTS Express bitstream delay added * DTS Express bitstream gap/overlap correction added * DTS Express decoding (Nero & ArcSoft) added * fixed: 6.1 -> 7.1 channel doubling resulted in wrong channel order * added (undocum.) option "-no7doubling" to disable 6.1 -> 7.1 channel doubling * DTS tracks with funny speaker settings are displayed as "7.1 (strange setup)" * warning is displayed when decoding "7.1 (strange setup)" tracks with ArcSoft v2.50 * ArcSoft DTS Decoder DLL is now directly accessed instead of using DirectShow v2.49 * DTS parser sets correct channel mask now * DTS-HD parser now properly detects format, channels and samplerate * added support for ArcSoft DTS(-HD) Decoder * added several tweaks to make ArcSoft Decoder behave correctly * added ArcSoft test to the "-test" processing * made ArcSoft Decoder default for DTS and DTS-HD decoding v2.48 * 96kHz LPCM tracks in (M2)TS and EVO/VOB containers didn't work correctly * "Applying (E-)AC3 delay" now only shows if the bitstream is actually modified * fixed crash in MP2 reader when checking some PCM tracks * added support for MLP formats 13 - 16 * improved/corrected MLP channel descriptions * MLP parser sets correct channel mask * added proper channel remaps for libav MLP decoding of "funny" channel formats * added proper channel remaps for Nero MLP decoding of "funny" channel formats * added proper channel remaps for Nero AC3 decoding of "funny" channel formats * when doubling 7th channel the channel mask is set correctly now * channel mask is corrected if a decoder doesn't output all channels * channel mask is corrected if channel downmixing is performed v2.47 * improved detection of AC3/DTS tracks in TS/M2TS container * added support for Blu-Ray style LPCM tracks in TS container * fixed 44.1kHz AC3 tracks * fixed crazy audio delay values when no video track was detected * sometimes video/audio tracks were not properly detected in (M2)TS container * MPEG2 demuxing/remuxing incorrectly output the first sequence headers twice * sequence end codes are removed when demuxing video now, too * MPEG2 pulldown removal is automatically activated only for EVO HD sources now * MPEG2 pulldown removal can be manually activated by using "-stripPulldown" * MPEG2 pulldown removal can be disabled by using "-keepPulldown" v2.46 * MPEG2 muxing now fully supports streams with mixed 23.976 and 29.970 content * mixed video/movie MPEG2 streams are now always muxed with 29.970 timestamps * if a movie MPEG2 stream goes video, processing is automatically restarted * MPEG2 pulldown is now automatically removed whenever an MPEG2 stream is read * new option "-keepPulldown" can be used to disable MPEG2 pulldown removal * corrected default WAV channel masks for 4.0, 6.1 and 7.1 * added proper channel remaps for libav AC3 decoding of "funny" channel formats * added general channel mask support * WAV parser reads channel mask from extensible header * (E-)AC3 parser sets correct channel mask v2.45 * Blu-Ray angles are now reported as separate titles * duplicate playlists are not listed in the "folder view", anymore * reduced TrueHD and RAW/PCM gap/overlap threshold to 7ms * reduced (E-)AC3 gap/overlap threshold to 60% of the runtime of one audio frame * reduced MP2 gap/overlap threshold to 60% of the runtime of one MP2 frame * reduced DTS threshold to 60% of the runtime of one DTS frame, but at least 7ms * fixed: Blu-Ray chapter export sometimes wrote incorrect "00:00:00.000" items * improved handling of MPEG2 streams (changes from interlaced to progressive) * video information now shows "with pulldown flags", if applicable * removed "-ignoreDiscon" from help; hint is shown when a discontinuity occurs * added "-ignoreEncrypt" option; hint is shown when a source is encrypted * new option "-extensible" creates WAV files with a slightly different header * fixed some smaller bugs v2.44 * libav is now automatically used when Nero/Sonic decoders are not working * gap/overlap correction of RAW/PCM tracks sometimes aborted * rerunning de/remuxing to correct gaps/overlaps ignored RAW/PCM tracks * "lossless check failed" messages are surpressed on join points now v2.43 * added automatic Blu-Ray playlist parsing * added support for multi part (e.g. seamless branching) Blu-Ray titles * audio gap/overlap detection rewrite completed * added audio gap/overlap correction functionality * added Blu-Ray chapter support * log lines are now prefixed with a track identifier * RAW/PCM delay is used instead of bitstream delay, if possible * fixed: video framecount was missing v2.42 * added support for 16bit DTSWAV files * fixed: Blu-Ray TrueHD support was broken v2.41 * added full MP2 (MPEG2 audio) support including decoding + bitstream delay * added TS/M2TS runtime detection * improved VOB/EVO runtime detection * added TrueHD gap/overlap detection * audio gap/overlap detection logic rewritten (not complete yet) * fixed: log file option didn't work correctly * fixed: some DTS tracks in PAL TS broadcasts weren't detected correctly * fixed: some E-AC3 tracks in PAL TS broadcasts weren't detected correctly v2.40 * video framecount is now also shown for TS/M2TS demuxing/remuxing * "-check" option added to check container for corruption * TS/M2TS: discontinuity check sometimes fired false alarms * HD DVD subtitle language/description was not always correct * title listing is only shown if there are at least 2 titles * if there is only one title, the title is automatically selected * TS/M2TS audio delay detection was broken * improved audio delay detection for broadcasts and badly mastered discs * TS/M2TS video demuxing could eventually add some invalid data * new option "log=c:\whatever\log.txt" specifies the log file path/name v2.39 * simple audio transcoding was broken v2.38 * fixed file path handling bug v2.37 * added HD DVD chapter support * added HD DVD subtitle demuxing support * added pre-freeze detection for Haali Matroska Muxer bug * invalid characters are removed from file names now * log file is copied to destination path (of first destination file) v2.36 * TS/M2TS: discontinuity is only checked for tracks which are de- or remuxed * TS/M2TS: "-demux" creates both a "thd" and an "ac3" file for "thd/ac3" tracks * TS/M2TS: "eac3to source.m2ts movie.mkv" transcodes "thd/ac3" tracks to FLAC * M2TS: track language is displayed (if the file "xxxxx.clpi" is available) * TS: track language is displayed (if the source file contains this info) * video gaps/overlaps in the last 5 seconds of the movie are ignored now v2.35 * fixed broken EVO support v2.34 * TS/M2TS: fixed PAT/PMT reading bug * TS/M2TS: new "-ignoreDiscon" option makes eac3to ignore discontinuity errors v2.33 * added full TS and M2TS support (file joining not supported yet, though) * further improved "-demux" file names * help text and HD DVD track listing is now also written to the log v2.32 * added automatic "VPLST000.XPL" and "HVA00001.VTI" parsing * "eac3to" or "eac3to ." inside of a HD DVD folder lists all title sets * "eac3to someHdDvdMovieFolder" lists all title sets * "eac3to someHdDvdMovieFolder whatever.mkv" converts the longest title set * "eac3to someHdDvdMovieFolder x) whatever.mkv" converts the selected title set * EVO report now contains the EVO display name (if "VPLST000.XPL" is available) * added language to EVO audio track listing (if "VPLST000.XPL" is available) * added EVO audio track display names (if "VPLST000.XPL" is available) * sequence end codes are stripped from VC-1, MPEG2 and h264/AVC * put "-stripPulldown" option back in on request * option "-demux" now writes to "current directory" instead of source directory * option "-demux" now creates files with meaningful names * doing "eac3to src.evo dst.mkv" now creates audio files with meaningful names * doing "eac3to src.evo dst.mkv" writes the audio files to same path as the MKV * after successful (erroneous) processing "success.wav" (error.wav) is played v2.31 * DTSWAV input support added * fixed bitstream delaying of 96khz DTS tracks * improved DTS runtime calculation * fixed DTS audio gap/overlap correction for strange DTS formats * fixed E-AC3 audio gap/overlap correction for strange bitrates * fixed incorrect MKV "default duration" when using "-24p" or "-30p" * fixed incorrect MKV "default duration" when using "-slowdown" or "-speedup" * improved support for "open bitrate" DTS files * slightly improved automatic (E-)AC3 delaying exactness v2.30 * fixed wrong MPEG2 framerate (bug introduced in v2.29) v2.29 * added automatic audio gap/overlap correction for (E-)AC3, DTS(-HD) and LPCM * options "-slowdown" and "-speedup" can now also be used for video muxing * added support for muxing of EVO's secondary video track to MKV * added "-24p", "-30p" and "-60i" options to overwrite detected h264 framerate * fixed some MPEG2 muxing problems * temporarily disabled "-stripPulldown" because vc1conv 0.3 is better v2.28 * new "-seekToIFrames" switch makes Basic Instinct (h264) muxing work v2.27 * fixed h264/AVC muxing crash with some movies (due to too high RAM usage) * fixed missing frames at the end of the movie when doing h264/AVC muxing * fixed non-working "eac3to -test" v2.26 * Haali Splitter replaced with internal splitter for EVO h264/AVC tracks * external raw h264/AVC tracks can now be muxed directly to Matroska * timestamps for h264/AVC MKV videos don't need to be rewritten, anymore * gaps/overlaps in h264/AVC track of EVO files are detected now * h264 aspect ratio is detected and written into MKV now * Haali Media Splitter is not being used at all, anymore * mkvtoolnix is not being used at all, anymore * added detection for MPEG2 interlaced -> progressive mode change * workaround for eacGui bug v2.25 * fixed MPEG2 muxing for interlaced content v2.24 * Haali Splitter replaced with internal splitter for EVO MPEG2 tracks * external raw MPEG2 tracks can now be muxed directly to Matroska * timestamps for MPEG2 MKV videos don't need to be rewritten, anymore * gaps/overlaps in MPEG2 track of EVO files are detected now * VC-1 and MPEG2 aspect ratios are detected and written into MKV now * fixed bug with "-down2" option v2.23 * fixed bug which made some DTS tracks appear dirty although they weren't * fixed extremely big gap detection with Fantastic Four 2 * fixed non cleaned up gaps file bug v2.22 * gap/overlap logic changed completely (optional two pass muxing now) * "-ignoreGaps" parameter is gone v2.21 * latest libav MLP/TrueHD decoder fixes "lossless check failed" bug * latest libav MLP/TrueHD decoder supports & decodes 7.1 TrueHD tracks * Matroska muxing speed dramatically improved * eac3to now detects and handles E-AC3 7.1 tracks correctly * option "-core" extracts 5.1 core from E-AC3 7.1 tracks * added support for small DTS files (< 300kb) v2.20 * changed VC-1 muxing method to fix problems with several movies, e.g. - Unforgiven - Phantom of the Opera - Million Dollar Baby - Fantastic Four 2 * fps value is now also added to MKV header when muxing raw VC-1 stream * added new "-skip" option to skip corruption in the beginning of an EVO file * added extra handling which fixes some EVO authoring bugs v2.19 * fixed h264 bitstream parsing of framerate information format * fixed (again) muxing of some rare VC-1 titles like e.g. POTO USA v2.18 * fixed bug which stopped eac3to v2.15-17 from working on some PCs * fixed h264 bitstream parsing bug (Sum of all Fears) * fps value is added to MKV header now * relaxed VC-1 gap detection once more * TrueHD decoding to stdout fixed (always output as 24 bit now) v2.17 * fixed VC-1 pulldown removal * VC-1 pulldown removal must now be activated by the new option "-stripPulldown" * improved VC-1 gap/overlap detection * new option "-ignoreGaps" disables VC-1 gap/overlap detection * libav E-AC3 decoder background decoding removed again v2.16 * fixed "eac3to -test" crash * fixed "eac3to some.ddp some.wav" crash * made video gap/overlap detection a little more relaxed * WAV header is initialized to 4GB instead of 0GB (for stdout) * fixed incorrect "primary/secondary" text v2.15 * Haali Splitter replaced with internal splitter for EVO VC-1 tracks * external raw VC-1 tracks can now be muxed directly to Matroska * timestamps for VC-1 MKV videos don't need to be rewritten, anymore * some problematic VC-1 movies should mux fine to MKV now (e.g. POTO USA) * gaps/overlaps in VC-1 track of EVO files are detected and displayed now * pulldown can be removed from external raw VC-1 tracks now * pulldown is automatically removed when demuxing EVO VC-1 tracks now * updated to the latest revision of the libav E-AC3 decoder * some minor changes and bugfixes v2.14 * libav TrueHD decoder "end of stream" bug should be fixed now * fixed libav DTS decoder - subwoofer channels is properly decoded now, too * patched libav DTS decoder to output full 24 bit * updated to the latest revision of the libav E-AC3 decoder * when decoding E-AC3 with Nero, libav decoding is also executed at the same time v2.13 * added option to downmix multi channel audio to stereo * added support for VC-1 custom aspect ratios * added stdout output support v2.12 (thanks to Ron/drmpeg for all his help) * video resolution, framerate and mode (progressive/interlaced) are displayed * rewriting timestamps should now always write the correct framerate * after a full EVO/VOB processing the number of video frames is shown * EVO 16 bit and 24 bit LPCM demuxing supported now (need samples for 20 bit) * (E-)AC3 bitstream can be delayed now (similar to delaycut) * DTS bitstream can be delayed now (similar to delaycut) * DTS-HD High-Res and Master Audio bitstream can be delayed now * when demuxing bitstream audio tracks from EVO delay is automatically applied * some little bugs fixed v2.11 * libav E-AC3 decoding is without DRC now * libav AC3 decoding added (without DRC) * libav E-AC3 and AC3 decoding hacked to return full 24 bit * fixed: delay was not applied for lossless audio tracks * fixed crash when parsing PCM files without doing any conversion * TrueHD dialnorm was displayed incorrectly * changed 23.976 to 24/1.001 * fixed some more minor bugs v2.10 * fixed crash which occurred when doing "EVO/VOB -> Surcode DTS encoding" * "eac3to source.evo movie.mkv" syntax replaces "-auto" option * "eac3to 1.evo+2.evo movie.evo" syntax supported now for simple EVO/VOB joining v2.09 * EVO demuxing added with proper delays for all audio tracks * EVO file joining/rebuilding added * automated EVO video remuxing (Matroska) added * automated rewriting of Matroska timestamps to 24p via mkvtoolnix added * multiple operations on the source file can now be run at the same time * switch "-test" tests all external DirectShow filters and tools * latest ffmpeg/libav TrueHD and E-AC3 decoder patches included * latest libAften build included * libav TrueHD decoder is now the default decoder for TrueHD/MLP * support for libav DTS decoding added * fixed a whole lot of bugs (and might have added a few new ones) v2.08 * fixed: bitdepth reducer sometimes crashed when being fed a PCM file * fixed: FLAC encoder sometimes crashed when delay was applied * fixed: some TrueHD files were dithered/processed by Nero when they shouldn't * fixed: Surcode 1.0.29 encoding automation * fixed: source file was deleted when source and dest file names were identical * eac3to output is now always written to "log.txt" * when a crash occurs, "log.txt" is added to the bug report * improved help text + hints slightly * undocumented switch "-check16bit" added * undocumented switch "-mono" added v2.07 * fixed libAV MLP decoding support * added automatic MLP ID20 channel remapping * Surcode 1.0.29 (or newer) home directory detection added v2.06 * doing FLAC -> FLAC now copies metadata from source to destination file * MLP files are correctly decoded now (by both Nero and libav/ffmpeg) * runtime for padded DTS files is shown correctly now v2.05 * added support for libav/ffmpeg decoding of TrueHD/MLP and E-AC3 * added "-libav" switch to force libav decoding v2.04 * don't need dtsac3source.ax, anymore * don't need Nero Splitter, anymore * don't need Sonic HD Demuxer, anymore * replaced hacked DirectShow feeding with a cleaner approach * added support for DTS-HD Master Audio 7.1 tracks (only 5.1 decoding) * little performance boost for PAL speedup/down on DualCore CPUs * fixed some bugs v2.03 * new "-debug" switch added v2.02 * fixed: automatic registering of the dtsac3source filter crashed v2.01 * fixed: AC3 encoding sometimes crashed when being fed 24 bit audio data * fixed: AC3 encoded files were invalid when being fed 24 bit audio data * eac3toGUI didn't work with eac3to v2.0 * "eac3to source.ac3 dest.ac3 -slowdown" didn't do anything useful * when a crash occurs, the bug report is automatically copied to clipboard now * some minor cosmetic improvements v2.00 totally new features * AC3 decoding support (Nero's decoder without DRC/dialnorm) * resampling to 44.1/48/96 kHz (by using "r8brain") * apply/reverse PAL speedup (by using "r8brain") * "eac3to sourceFile" will print out source file details strongly enhanced features * dramatically improved performance (no intermediate files, anymore!) * proper 6.1/7.1 downmixing to 5.1 instead of just dropping the back surround channels * RAW/PCM file detection now auto detects channels, bitdepth and endian * WAV is now fully supported as source file format * destination file extension "PCM" creates Blu-Ray style LPCM tracks * bitdepth can be reduced to anything between 14 bits and 23 bits DTS related improvements/changes * DTS-96/24 support added * "open bitrate" support added * strange channel configuration support added * removal of zero padding from DTS files added * eac3to can fix broken DTS-ES files (they decode to 5.1 instead of 6.1 without the fix) * dialog normalization can be removed without removing the additional DTS-HD data now * core extraction must be specifically asked for now (see "-core" switch) AC3 related improvements * did I mention that eac3to can decode AC3 now? * strange channel configuration support added TrueHD related improvements * delay problem (hopefully) solved * fixed: sometimes some audio data in the middle of a track was lost * TrueHD/AC3 interweaved file can be stripped to TrueHD only now various minor improvements/changes * progress bar added * eac3to detects file format independently of file extension * multiple input files can be treated as one big file * "sox" is not needed, anymore * "dump" filter not needed, anymore * "aften.exe" replaced by "libAften.dll" * "flac.exe" replaced by "libFlac.dll" * DTS/DD+/AC3 source filter ships with eac3to now * 8bit support added * crash analyzer and bug reporting added v1.23 * bugfix: sometimes TrueHD decoding resulted in incorrect sampling rate v1.22 * 6.1 -> 7.1 channel doubling was sometimes incorrectly skipped * OS speaker settings now don't have to be 7.1, anymore * added detection of 5.1 output when 6.1 was expected * DTS and DTS-ES files are now forcefully patched to 24 bit by eac3to (workaround for Sonic decoder) * Sonic Audio Decoder is now always used by default for DTS decoding v1.21 * bugfix: 2 channel DTS files were not accepted * added: DTS-ES 6.1 support * added: DTS-HD High Resolution Matrix 5.1 support * added: DTS-HD Master Audio 6.1 support v1.20 * bugfix: some Blu-Ray TrueHD tracks were not accepted * change: eac3to output text slightly improved v1.19 * bugfix: still some TrueHD files were not accepted ("The source file format is unknown") * added: FLAC supported as source/input file format now * added: full delay functionality v1.18 * bugfix: some TrueHD files were not accepted ("The source file format is unknown") * change: EVO files are not accepted as source files, anymore * added: detection and repacking of 16 bit TrueHD tracks * added: proper detection of "DTS-HD Master Audio" and "DTS-HD High Resolution" tracks * added: runtime information for "DTS-HD High Resolution" tracks * bugfix: bitrate information for "DTS-HD High Resolution" tracks * added: decoding of "DTS-HD Master Audio" tracks (Sonic) * added: decoding of "DTS-HD High Resolution" tracks (Sonic) * added: decoding of conventional DTS tracks (Sonic/Nero) v1.17 * TrueHD dialog normalization removal added v1.16 * added decoding support for Blu-Ray TrueHD files v1.15 * bugfixes v1.14 * DTS dialog normalization can be removed now * DTS core can be extracted from DTS-HD track now v1.13 * "eac3to src.ac3 dst.ac3" removes dialog normalization from AC3 files * "eac3to src.eac3 dst.eac3" removes dialog normalization from E-AC3 files * "eac3to src.thd dst.ac3" extracts the AC3 frames from a Blu-Ray TrueHD track and removes dialog normalization v1.12 * tools "flac.exe", "aften.exe" and "sox.exe" are now distributed in the eac3to zip * correct channel mapping for 7.1 LPCM tracks is default now * new option "-down6" allows downconverting of 7.1 tracks to 5.1 * modded "flac.exe" ships with eac3to now, which has no problems with 2GB file output, anymore v1.11 * bugfix: (L)PCM -> DTS encoding automation failed when source and destination folders differed * added: new "-allowDnr" switch allows Nero's audio decoder to apply DNR * added: new "-keepDialnorm" switch disables removal of E-AC3 dialnorm information v1.10 * E-AC3 dialog normalization detection and removal * DRC turned off for Nero E-AC3 decoder * Surcode automation improved * Nero is now the default E-AC3 and TrueHD decoder * the flag "/nero" is no more * there is a flag "/sonic" now to force the use of the Sonic filters v1.09 * multi channel mono wav output added * automated SurCode DTS encoding added * 24bit PCM handling works now (was buggy before) * "-blu-ray" option removed * with PCM input files "bigendian" is default now * with 5.1 PCM input blu-ray style channel remapping is default now * switches "-16" and "-24" are valid for both TrueHD and PCM input now * eac3to now creates the WAV files on its own instead of using sox * target extension ".wavs" results in one mono wav for each channel being created * SurCode DVD DTS encoding automation added * new options "-768" and "-1536" for DTS encoding * TrueHD output is not downconverted to 16bit by default, anymore * new option "-down16" downconverts the raw data from 24 -> 16 bit (not limited to TrueHD input) v1.08 * added PCM input support * automatic detection of PCM bitdepth added (16bit or 24bit) * "-blu-ray" switch remaps PCM channels correctly v1.07 * added "-8" switch for 8 channel support v1.06 * mono E-AC3 support added v1.05 * support for 5.1 TrueHD audio tracks added v1.04 * E-AC3 files bigger than 4GB are supported now v1.03 * AC3 files bigger than 2GB are supported now v1.02 * FLAC encoding works now without any input/output size limits v1.01 * support for FLAC encoding added * bitrate can be specified via command line parameter * ffdshow removed from the filter chain * "ddp" and "ec3" file extensions are accepted now, too * fix: "dd+" file extension didn't work correctly. v1.00 * initial release * can convert a 2.0 or 5.1 channel E-AC3 file to AC3.
笔记本的风扇控制 ---------------------------------------- 09 November 2006. Summary of changes for version 20061109: 1) ACPI CA Core Subsystem: Optimized the Load ASL operator in the case where the source operand is an operation region. Simply map the operation region memory, instead of performing a bytewise read. (Region must be of type SystemMemory, see below.) Fixed the Load ASL operator for the case where the source operand is a region field. A buffer object is also allowed as the source operand. BZ 480 Fixed a problem where the Load ASL operator allowed the source operand to be an operation region of any type. It is now restricted to regions of type SystemMemory, as per the ACPI specification. BZ 481 Additional cleanup and optimizations for the new Table Manager code. AcpiEnable will now fail if all of the required ACPI tables are not loaded (FADT, FACS, DSDT). BZ 477 Added #pragma pack(8/4) to acobject.h to ensure that the structures in this header are always compiled as aligned. The ACPI_OPERAND_OBJECT has been manually optimized to be aligned and will not work if it is byte-packed. Example Code and Data Size: These are the sizes for the OS- independent acpica.lib produced by the Microsoft Visual C++ 6.0 32- bit compiler. The debug version of the code includes the debug output trace mechanism and has a much larger code and data size. Previous Release: Non-Debug Version: 78.1K Code, 17.1K Data, 95.2K Total Debug Version: 155.4K Code, 63.1K Data, 218.5K Total Current Release: Non-Debug Version: 77.9K Code, 17.0K Data, 94.9K Total Debug Version: 155.2K Code, 63.1K Data, 218.3K Total 2) iASL Compiler/Disassembler and Tools: Fixed a problem where the presence of the _OSI predefined control method within complex expressions could cause an internal compiler error. AcpiExec: Implemented full region support for multiple address spaces. SpaceId is now part of the REGION object. BZ 429 ---------------------------------------- 11 Oc
集合了 所有的 Unix命令大全 登陆服务器时输入 公帐号 openlab-open123 telnet 192.168.0.23 自己帐号 sd08077-you0 ftp工具 192.168.0.202 tools-toolss 老师测评网址 http://172.16.0.198:8080/poll/ 各个 shell 可互相切换 ksh:$ sh:$ csh:guangzhou% bash:bash-3.00$ 一、注意事项 命令和参数之间必需用空格隔开,参数和参数之间也必需用空格隔开。 一行不能超过256个字符;大小写有区分。 二、特殊字符含义 文件名以“.”开头的都是隐藏文件/目录,只需在文件/目录名前加“.”就可隐藏它。 ~/ 表示主目录。 ./ 当前目录(一个点)。 ../ 上一级目录(两个点)。 ; 多个命令一起用。 > >> 输出重定向 。将一个命令的输出内容写入到一个文件里面。如果该文件存在, 就将该文件的内容覆盖; 如果不存在就先创建该文件, 然后再写入内容。 输出重定向,意思就是说,将原来屏幕输出变为文件输出,即将内容输到文件中。 < << 输入重定向。 本来命令是通过键盘得到输入的,但是用小于号,就能够使命令从文件中得到输入。 \ 表示未写完,回车换行再继续。 * 匹配零个或者多个字符。 ? 匹配一个字符。 [] 匹配中括号里的内容[a-z][A-Z][0-9]。 ! 事件。 $ 取环境变量的值。 | 管道。把前一命令的输出作为后一命令的输入,把几个命令连接起来。 |经常跟tee连用,tee 把内容保存到文档并显示出来。 三、通用后接命令符 -a 所有(all)。 -e 所有(every),比a更详细。 -f 取消保护。 -i 添加提示。 -p 强制执行。 -r 目录管理。 分屏显示的中途操作 空格 继续打开下一屏; 回车 继续打开下一行; b 另外开上一屏; f 另外开下一屏; h 帮助; q或Ctrl+C 退出; /字符串 从上往下查找匹配的字符串; ?字符串 从下往上查找匹配的字符串; n 继续查找。 四、退出命令 exit 退出; DOS内部命令 用于退出当前的命令处理器(COMMAND.COM) 恢复前一个命令处理器。 Ctrl+d 跟exit一样效果,表中止本次操作。 logout 当csh时可用来退出,其他shell不可用。 clear 清屏,清除(之前的内容并未删除,只是没看到,拉回上面可以看回)。 五、目录管理命令 pwd 显示当前所在目录,打印当前目录的绝对路径。 cd 进入某目录,DOS内部命令 显示或改变当前目录。 cd回车/cd ~ 都是回到自己的主目录。 cd . 当前目录(空格再加一个点)。 cd .. 回到上一级目录(空格再加两个点)。 cd ../.. 向上两级。 cd /user/s0807 从绝对路径去到某目录。 cd ~/s0807 直接进入主目录下的某目录(“cd ~"相当于主目录的路径的简写)。 ls 显示当前目录的所有目录和文件。 用法 ls [-aAbcCdeEfFghHilLmnopqrRstux1@] [file...] ls /etc/ 显示某目录下的所有文件和目录,如etc目录下的。 ls -l (list)列表显示文件(默认按文件名排序), 显示文件的权限、硬链接数(即包含文件数,普通文件是1,目录1+)、用户、组名、大小、修改日期、文件名。 ls -t (time)按修改时间排序,显示目录和文件。 ls -lt 是“-l”和“-t”的组合,按时间顺序显示列表。 ls -F 显示文件类型,目录“/ ”结尾;可执行文件“*”结尾;文本文件(none),没有结尾。 ls -R 递归显示目录结构。即该目录下的文件和各个副目录下的文件都一一显示。 ls -a 显示所有文件,包括隐藏文件。 文件权限 r 读权限。对普通文件来说,是读取该文件的权限;对目录来说,是获得该目录下的文件信息。 w 写权限。对文件,是修改;对目录,是增删文件与子目录。 (注 删除没有写权限的文件可以用 rm -f ,这是为了操作方便,是人性化的设计)。 x 执行权限;对目录,是进入该目录 - 表示没有权限 形式 - rw- r-- r-- 其中 第一个是文件类型(-表普通文件,d表目录,l表软链接文件) 第2~4个是属主,生成文件时登录的人,权限最高,用u表示 第5~7个是属组,系统管理员分配的同组的一个或几个人,用g表示 第8~10个是其他人,除属组外的人,用o表示 所有人,包括属主、属组及其他人,用a表示 chmod 更改权限; 用法 chmod [-fR] <绝对模式> 文件 ... chmod [-fR] <符号模式列表> 文件 ... 其中 <符号模式列表> 是一个用逗号分隔的表 [ugoa]{+|-|=}[rwxXlstugo] chmod u+rw 给用户加权限。同理,u-rw也可以减权限。 chmod u=rw 给用户赋权限。与加权限不一样,赋权限有覆盖的效果。 主要形式有如下几种 chmod u+rw chmod u=rw chmod u+r, u+w chmod u+rw,g+w, o+r chmod 777( 用数字的方式设置权限是最常用的) 数字表示权限时,各数位分别表示属主、属组及其他人; 其中,1是执行权(Execute),2是写权限(Write),4是读权限(Read), 具体权限相当于三种权限的数相加,如7=1+2+4,即拥有读写和执行权。 另外,临时文件/目录的权限为rwt,可写却不可删,关机后自动删除;建临时目录:chmod 777 目录名,再chmod +t 目录名。 id 显示用户有效的uid(用户字)和gid(组名) 用法 id [-ap] [user] id 显示自己的。 id root 显示root的。 id -a root 显示用户所在组的所有组名(如root用户,是所有组的组员) df 查看文件系统,查看数据区 用法 df [-F FSType] [-abeghklntVvZ] [-o FSType 特定选项] [目录 | 块设备 | 资源] df -k 以kbytes显示文件大小的查看文件系统方式 六、显示文件内容 more 分屏显示文件的内容。 用法 more [-cdflrsuw] [-行] [+行号] [+/模式] [文件名 ...]。 显示7个信息:用户名 密码 用户id(uid) 组id(gid) 描述信息(一般为空) 用户主目录 login shell(登录shell) cat 显示文件内容,不分屏(一般用在小文件,大文件显示不下);合并文件,仅在屏幕上合并,并不改变原文件。 用法 cat [ -usvtebn ] [-|文件] ... tail 实时监控文件,一般用在日志文件,可以只看其中的几行。 用法 tail [+/-[n][lbc][f]] [文件] tail [+/-[n][l][r|f]] [文件] 七、文件/目录的增删 echo 显示一行内容。 touch 如果文件/目录不存在,则创建新文件/目录;如果文件存在,那么就是更新该文件的最后访问时间, 用法 touch [-acm] [-r ref_file] 文件... touch [-acm] [MMDDhhmm[yy]] 文件... touch [-acm] [-t [[CC]YY]MMDDhhmm[.SS]] file... mkdir 创建目录(必须有创建目录的权限) 用法 mkdir [-m 模式] [-p] dirname ... mkdir dir1/dir2 在dir1下建dir2 mkdir dir13 dir4 dir5 连建多个 mkdir ~/games 用户主目录下建(默认在当前目录下创建) mkdir -p dir6/dir7/dir8 强制创建dir8;若没有前面的目录,会自动创建dir6和dir7。 不用-p时,若没有dir6/dir7,则创建失败。 cp 复制文件/目录 cp 源文件 目标文件 复制文件;若已有文件则覆盖 cp -r 源目录 目标目录 复制目录;若已有目录则把源目录复制到目标目录下, 没有目标目录时,相当于完全复制源目录,只是文件名不同。 cp beans apple dir2 把beans、apple文件复制到dir2目录下 cp -i beans apple 增加是否覆盖的提示 mv 移动或重命名文件/目录 用法 mv [-f] [-i] f1 f2 mv [-f] [-i] f1 ... fn d1 mv [-f] [-i] d1 d2 mv 源文件名 目标文件名 若目标文件名还没有,则是源文件重命名为目标文件;若目标文件已存在,则源文件覆盖目标文件。 mv 源文件名 目标目录 移动文件 mv 源目录 目标目录 若目标目录不存在,则源目录重命名;若目标目录已存在,则源目录移动到目标目录下。 rm 删除文件/目录 用法 rm [-fiRr] 文件 ... rm 文件名 删除文件。 rm -r 目录名 删除目录。 rm –f 文件 只要是该文件或者目录的拥有者,无论是否有权限删除,都可以用这个命令参数强行删除。 rm -rf * 删除所有文件及目录 rmdir 删除空目录。只可以删除空目录。 ln 创建硬链接或软链接,硬链接=同一文件的多个名字;软链接=快捷方式 用法 ln [-f] [-n] [-s] f1 [f2] ln [-f] [-n] [-s] f1 ... fn d1 ln [-f] [-n] -s d1 d2 ln file1 file1.ln 创建硬链接。感觉是同一文件,删除一个,对另一个没有影响;须两个都删除才算删除。 ln -s file1 file1.sln 创建软链接。可跨系统操作,冲破操作权限;也是快捷方式。 八、时间显示 date 显示时间,精确到秒 用法 date [-u] mmddHHMM[[cc]yy][.SS] date [-u] [+format] date -a [-]sss[.fff] cal 显示日历 cal 9 2008 显示2008年9月的日历; cal 显示当月的 用法 cal [ [月] 年 ] 九、帮助 man 帮助( format and display the on-line manual pages) 用法 man [-] [-adFlrt] [-M 路径] [-T 宏软件包] [-s 段] 名称 ... man [-] [-adFlrt] [-M path] [-T macro-package] [-s section] name... man [-M 路径] -k 关键字 ... man [-M 路径] -f 文件 ... awk 按一定格式输出(pattern scanning and processing language) 用法 awk [-Fc] [-f 源代码 | 'cmds'] [文件] 十、vi 底行模式 /? 命令模式 i a o 输入模式 vi 的使用方法 1、光标 h 左 j 下 k 上 l 右 set nu 显示行号(set nonu) 21 光标停在指定行 21G 第N行 (G到文件尾,1G到文件头) 如果要将光标移动到文件第一行,那么就按 1G H 屏幕头 M 屏幕中间 L 屏幕底 ^ 或 shift+6 行首 $ 或 shift+4 行尾 Ctrl+f 下翻 Ctrl+b 上翻 2、输入 (输入模式) o 光标往下换一行 O (大写字母o)在光标所在行上插入一空行 i 在光标所在位置的前面插入字母 a 在光标所在位置的后面插入一个新字母 退出插入状态。 3、修改替换 r 替换一个字符 dd 删除行,剪切行 (5dd删除5行) 5,10d 删除 5 至 10 行(包括第 5行和第 10 行) x 删除一个字符 dw 删除词,剪切词。 ( 3dw删除 3 单词) cw 替换一个单词。 (cw 和 dw 的区别 cw 删除某一个单词后直接进入编辑模式,而dw删除词后仍处于命令模式) cc 替换一行 C 替换从光标到行尾 yy 复制行 (用法同下的 Y ,见下行) Y 将光标移动到要复制行位置,按yy。当你想粘贴的时候,请将光标移动到你想复制的位置的前一个位置,然后按 p yw 复制词 p 当前行下粘贴 1,2co3 复制行1,2在行3之后 4,5m6 移动行4,5在行6之后 u 当你的前一个命令操作是一个误操作的时候,那么可以按一下 u键,即可复原。只能撤销一次 r file2 在光标所在处插入另一个文件 ~ 将字母变成大写 J 可以将当前行与下一行连接起来 /字符串 从上往下找匹配的字符串 ?字符串 从下往上找匹配的字符串 n 继续查找 1,$s/旧串/新串/g 替换全文(或者 %s/旧串/新串/g) (1表示从第一行开始) 没有g则只替换一次,加g替换所有 3、存盘和退出 w 存盘 w newfile 存成新文件 wq 存盘再退出VI(或者ZZ或 X) q! 强行退出不存盘 查看用户 users 显示在线用户(仅显示用户名)。 who 显示在线用户,但比users更详细,包括用户名、终端号、登录时间、IP地址。 who am i 仅显示自己,(但包括用户名、端口、登录时间、IP地址;信息量=who)。 whoami 也仅显示自己,但只有用户名(仅显示自己的有效的用户名)。 w 显示比who更多内容,还包括闲置时间、占CPU、平均占用CPU、执行命令。 用法 w [ -hlsuw ] [ 用户 ] su 改变用户,需再输入密码。 用法 su [-] [ username [ arg ... ] ] su - 相当于退出再重新登录。 查找 find 查找文件 用法 find [-H | -L] 路径列表 谓词列表 find / -name perl 从根目录开始查找名为perl的文件。 find . -mtime 10 -print 从当前目录查找距离现在10天时修改的文件,显示在屏幕上。 (注 “10”表示第10天的时候;如果是“+10”表示10天以外的范围;“-10”表示10天以内的范围。) grep 文件中查找字符;有过滤功能,只列出想要的内容 用法 grep -hblcnsviw 模式 文件 . . . 如 grep abc /etc/passwd 在passwd文件下找abc字符 wc 统计 -l 统计行数; -w统计单词数; -c 统计字符数 如 grep wang /etc/passwd|wc -l 统计passwd文件含“wang”的行数 du 查看目录情况 如 du -sk * 不加-s会显示子目录,-k按千字节排序 用法 du [-a] [-d] [-h|-k] [-r] [-o|-s] [-H|-L] [文件...] 进程管理 ps 显示进程。 用法 ps [ -aAdeflcjLPyZ ] [ -o 格式 ] [ -t 项列表 ] [ -u 用户列表 ] [ -U 用户列表 ] [ -G 组列表 ] [ -p 进程列表 ] [ -g 程序组列表 ] [ -s 标识符列表 ] [ -z 区域列表 ] ps 显示自己的进程。 ps -e 显示每个进程,包括空闲进程。 ps -f 显示详情。 ps -ef 组合-e和-f,所有进程的详情。 ps -U uidlist(用户列表) 具体查看某人的进程。 kill pkill sleep jobs 用法 jobs [-l ] fg %n bg %n stop %n 挂起(仅csh能用) Ctrl+C Ctrl+Z 网络链接 ping usage ping host [timeout] usage ping -s [-l | U] [adLnRrv] [-A addr_family] [-c traffic_class] [-g gateway [-g gateway ...]] [-F flow_label] [-I interval] [-i interface] [-P tos] [-p port] [-t ttl] host [data_size] [npackets] ifconfig -a /sbin/ifconfig 查看本机的IP地址 netstat -rn rlogin ftp 帮助文件 [sd0807@localhost ~]$ help GNU bash, version 3.1.17(1)-release (i686-redhat-linux-gnu) These shell commands are defined internally. Type `help' to see this list. Type `help name' to find out more about the function `name'. Use `info bash' to find out more about the shell in general. Use `man -k' or `info' to find out more about commands not in this list. A star (*) next to a name means that the command is disabled. JOB_SPEC [&] (( expression )) . filename [arguments] [ arg... ] [[ expression ]] alias [-p] [name[=value] ... ] bg [job_spec ...] bind [-lpvsPVS] [-m keymap] [-f fi break [n] builtin [shell-builtin [arg ...]] caller [EXPR] case WORD in [PATTERN [| PATTERN]. cd [-L|-P] [dir] command [-pVv] command [arg ...] compgen [-abcdefgjksuv] [-o option complete [-abcdefgjksuv] [-pr] [-o continue [n] declare [-afFirtx] [-p] [name[=val dirs [-clpv] [+N] [-N] disown [-h] [-ar] [jobspec ...] echo [-neE] [arg ...] enable [-pnds] [-a] [-f filename] eval [arg ...] exec [-cl] [-a name] file [redirec exit [n] export [-nf] [name[=value] ...] or false fc [-e ename] [-nlr] [first] [last fg [job_spec] for NAME [in WORDS ... ;] do COMMA for (( exp1; exp2; exp3 )); do COM function NAME { COMMANDS ; } or NA getopts optstring name [arg] hash [-lr] [-p pathname] [-dt] [na help [-s] [pattern ...] history [-c] [-d offset] [n] or hi if COMMANDS; then COMMANDS; [ elif jobs [-lnprs] [jobspec ...] or job kill [-s sigspec | -n signum | -si let arg [arg ...] local name[=value] ... logout popd [+N | -N] [-n] printf [-v var] format [arguments] pushd [dir | +N | -N] [-n] pwd [-LP] read [-ers] [-u fd] [-t timeout] [ readonly [-af] [name[=value] ...] return [n] select NAME [in WORDS ... ;] do CO set [--abefhkmnptuvxBCHP] [-o option] [arg ...] shift [n] shopt [-pqsu] [-o long-option] opt source filename [arguments] suspend [-f] test [expr] time [-p] PIPELINE times trap [-lp] [arg signal_spec ...] true type [-afptP] name [name ...] typeset [-afFirtx] [-p] name[=valu ulimit [-SHacdfilmnpqstuvx] [limit umask [-p] [-S] [mode] unalias [-a] name [name ...] unset [-f] [-v] [name ...] until COMMANDS; do COMMANDS; done variables - Some variable names an wait [n] while COMMANDS; do COMMANDS; done { COMMANDS ; } 输入 man help BASH_BUILTINS(1) BASH_BUILTINS(1) NAME bash, :, ., [, alias, bg, bind, break, builtin, cd, command, compgen, complete, continue, declare, dirs, disown, echo, enable, eval, exec, exit, export, fc, fg, getopts, hash, help, history, jobs, kill, let, local, logout, popd, printf, pushd, pwd, read, readonly, return, set, shift, shopt, source, suspend, test, times, trap, type, typeset, ulimit, umask, una- lias, unset, wait - bash built-in commands, see bash(1) BASH BUILTIN COMMANDS Unless otherwise noted, each builtin command documented in this section as accepting options preceded by - accepts -- to signify the end of the options. For example, the :, true, false, and test builtins do not accept options. : [arguments] No effect; the command does nothing beyond expanding arguments and performing any specified redirections. A zero exit code is returned. . filename [arguments] source filename [arguments] Read and execute commands from filename in the current shell environment and return the exit status of the last command executed from filename. If filename does not contain a slash, file names in PATH are used to find the directory containing file- name. The file searched for in PATH need not be executable. When bash is not in posix mode, the current directory is searched if no file is found in PATH. If the sourcepath option to the shopt builtin command is turned off, the PATH is not searched. If any arguments are supplied, they become the positional parameters when filename is executed. Otherwise the positional parameters are unchanged. The return status is the status of the last command exited within the script (0 if no commands are executed), and false if filename is not found or cannot be read. alias [-p] [name[=value] ...] Alias with no arguments or with the -p option prints the list of aliases in the form alias name=value on standard output. When arguments are supplied, an alias is defined for each name whose value is given. A trailing space in value causes the next word to be checked for alias substitution when the alias is expanded. For each name in the argument list for which no value is supplied, the name and value of the alias is printed. Alias returns true unless a name is given for which no alias has been defined. bg [jobspec ...] Resume each suspended job jobspec in the background, as if it had been started with &. If jobspec is not present, the shell’s notion of the current job is used. bg jobspec returns 0 unless run when job control is disabled or, when run with job con- trol enabled, any specified jobspec was not found or was started without job control. bind [-m keymap] [-lpsvPSV] bind [-m keymap] [-q function] [-u function] [-r keyseq] bind [-m keymap] -f filename bind [-m keymap] -x keyseq:shell-command bind [-m keymap] keyseq:function-name bind readline-command Display current readline key and function bindings, bind a key sequence to a readline function or macro, or set a readline variable. Each non-option argument is a command as it would appear in .inputrc, but each binding or command must be passed as a sepa- rate argument; e.g., ’"\C-x\C-r": re-read-init-file’. Options, if supplied, have the following meanings: -m keymap Use keymap as the keymap to be affected by the subsequent bindings. Accept- able keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. vi is equivalent to vi-command; emacs is equivalent to emacs-standard. -l List the names of all readline functions. -p Display readline function names and bindings in such a way that they can be re-read. -P List current readline function names and bindings. -v Display readline variable names and values in such a way that they can be re- read. -V List current readline variable names and values. -s Display readline key sequences bound to macros and the strings they output in such a way that they can be re-read. -S Display readline key sequences bound to macros and the strings they output. -f filename Read key bindings from filename. -q function Query about which keys invoke the named function. -u function Unbind all keys bound to the named function. -r keyseq Remove any current binding for keyseq. -x keyseq:shell-command Cause shell-command to be executed whenever keyseq is entered. The return value is 0 unless an unrecognized option is given or an error occurred. break [n] Exit from within a for, while, until, or select loop. If n is specified, break n levels. n must be ≥ 1. If n is greater than the number of enclosing loops, all enclosing loops are exited. The return value is 0 unless the shell is not executing a loop when break is executed. builtin shell-builtin [arguments] Execute the specified shell builtin, passing it arguments, and return its exit sta- tus. This is useful when defining a function whose name is the same as a shell builtin, retaining the functionality of the builtin within the function. The cd builtin is commonly redefined this way. The return status is false if shell-builtin is not a shell builtin command. cd [-L|-P] [dir] Change the current directory to dir. The variable HOME is the default dir. The variable CDPATH defines the search path for the directory containing dir. Alterna- tive directory names in CDPATH are separated by a colon (:). A null directory name in CDPATH is the same as the current directory, i.e., ‘‘.’’. If dir begins with a slash (/), then CDPATH is not used. The -P option says to use the physical directory structure instead of following symbolic links (see also the -P option to the set builtin command); the -L option forces symbolic links to be followed. An argument of - is equivalent to $OLDPWD. If a non-empty directory name from CDPATH is used, or if - is the first argument, and the directory change is successful, the absolute path- name of the new working directory is written to the standard output. The return value is true if the directory was successfully changed; false otherwise. caller [expr] Returns the context of any active subroutine call (a shell function or a script exe- cuted with the . or source builtins. Without expr, caller displays the line number and source filename of the current subroutine call. If a non-negative integer is supplied as expr, caller displays the line number, subroutine name, and source file corresponding to that position in the current execution call stack. This extra information may be used, for example, to print a stack trace. The current frame is frame 0. The return value is 0 unless the shell is not executing a subroutine call or expr does not correspond to a valid position in the call stack. command [-pVv] command [arg ...] Run command with args suppressing the normal shell function lookup. Only builtin com- mands or commands found in the PATH are executed. If the -p option is given, the search for command is performed using a default value for PATH that is guaranteed to find all of the standard utilities. If either the -V or -v option is supplied, a description of command is printed. The -v option causes a single word indicating the command or file name used to invoke command to be displayed; the -V option produces a more verbose description. If the -V or -v option is supplied, the exit status is 0 if command was found, and 1 if not. If neither option is supplied and an error occurred or command cannot be found, the exit status is 127. Otherwise, the exit status of the command builtin is the exit status of command. compgen [option] [word] Generate possible completion matches for word according to the options, which may be any option accepted by the complete builtin with the exception of -p and -r, and write the matches to the standard output. When using the -F or -C options, the vari- ous shell variables set by the programmable completion facilities, while available, will not have useful values. The matches will be generated in the same way as if the programmable completion code had generated them directly from a completion specification with the same flags. If word is specified, only those completions matching word will be displayed. The return value is true unless an invalid option is supplied, or no matches were generated. complete [-abcdefgjksuv] [-o comp-option] [-A action] [-G globpat] [-W wordlist] [-P prefix] [-S suffix] [-X filterpat] [-F function] [-C command] name [name ...] complete -pr [name ...] Specify how arguments to each name should be completed. If the -p option is sup- plied, or if no options are supplied, existing completion specifications are printed in a way that allows them to be reused as input. The -r option removes a completion specification for each name, or, if no names are supplied, all completion specifica- tions. The process of applying these completion specifications when word completion is attempted is described above under Programmable Completion. Other options, if specified, have the following meanings. The arguments to the -G, -W, and -X options (and, if necessary, the -P and -S options) should be quoted to protect them from expansion before the complete builtin is invoked. -o comp-option The comp-option controls several aspects of the compspec’s behavior beyond the simple generation of completions. comp-option may be one of: bashdefault Perform the rest of the default bash completions if the compspec gen- erates no matches. default Use readline’s default filename completion if the compspec generates no matches. dirnames Perform directory name completion if the compspec generates no matches. filenames Tell readline that the compspec generates filenames, so it can per- form any filename-specific processing (like adding a slash to direc- tory names or suppressing trailing spaces). Intended to be used with shell functions. nospace Tell readline not to append a space (the default) to words completed at the end of the line. plusdirs After any matches defined by the compspec are generated, directory name completion is attempted and any matches are added to the results of the other actions. -A action The action may be one of the following to generate a list of possible comple- tions: alias Alias names. May also be specified as -a. arrayvar Array variable names. binding Readline key binding names. builtin Names of shell builtin commands. May also be specified as -b. command Command names. May also be specified as -c. directory Directory names. May also be specified as -d. disabled Names of disabled shell builtins. enabled Names of enabled shell builtins. export Names of exported shell variables. May also be specified as -e. file File names. May also be specified as -f. function Names of shell functions. group Group names. May also be specified as -g. helptopic Help topics as accepted by the help builtin. hostname Hostnames, as taken from the file specified by the HOSTFILE shell variable. job Job names, if job control is active. May also be specified as -j. keyword Shell reserved words. May also be specified as -k. running Names of running jobs, if job control is active. service Service names. May also be specified as -s. setopt Valid arguments for the -o option to the set builtin. shopt Shell option names as accepted by the shopt builtin. signal Signal names. stopped Names of stopped jobs, if job control is active. user User names. May also be specified as -u. variable Names of all shell variables. May also be specified as -v. -G globpat The filename expansion pattern globpat is expanded to generate the possible completions. -W wordlist The wordlist is split using the characters in the IFS special variable as delimiters, and each resultant word is expanded. The possible completions are the members of the resultant list which match the word being completed. -C command command is executed in a subshell environment, and its output is used as the possible completions. -F function The shell function function is executed in the current shell environment. When it finishes, the possible completions are retrieved from the value of the COMPREPLY array variable. -X filterpat filterpat is a pattern as used for filename expansion. It is applied to the list of possible completions generated by the preceding options and argu- ments, and each completion matching filterpat is removed from the list. A leading ! in filterpat negates the pattern; in this case, any completion not matching filterpat is removed. -P prefix prefix is added at the beginning of each possible completion after all other options have been applied. -S suffix suffix is appended to each possible completion after all other options have been applied. The return value is true unless an invalid option is supplied, an option other than -p or -r is supplied without a name argument, an attempt is made to remove a comple- tion specification for a name for which no specification exists, or an error occurs adding a completion specification. continue [n] Resume the next iteration of the enclosing for, while, until, or select loop. If n is specified, resume at the nth enclosing loop. n must be ≥ 1. If n is greater than the number of enclosing loops, the last enclosing loop (the ‘‘top-level’’ loop) is resumed. The return value is 0 unless the shell is not executing a loop when con- tinue is executed. declare [-afFirtx] [-p] [name[=value] ...] typeset [-afFirtx] [-p] [name[=value] ...] Declare variables and/or give them attributes. If no names are given then display the values of variables. The -p option will display the attributes and values of each name. When -p is used, additional options are ignored. The -F option inhibits the display of function definitions; only the function name and attributes are printed. If the extdebug shell option is enabled using shopt, the source file name and line number where the function is defined are displayed as well. The -F option implies -f. The following options can be used to restrict output to variables with the specified attribute or to give variables attributes: -a Each name is an array variable (see Arrays above). -f Use function names only. -i The variable is treated as an integer; arithmetic evaluation (see ARITHMETIC EVALUATION ) is performed when the variable is assigned a value. -r Make names readonly. These names cannot then be assigned values by subsequent assignment statements or unset. -t Give each name the trace attribute. Traced functions inherit the DEBUG and RETURN traps from the calling shell. The trace attribute has no special mean- ing for variables. -x Mark names for export to subsequent commands via the environment. Using ‘+’ instead of ‘-’ turns off the attribute instead, with the exception that +a may not be used to destroy an array variable. When used in a function, makes each name local, as with the local command. If a variable name is followed by =value, the value of the variable is set to value. The return value is 0 unless an invalid option is encountered, an attempt is made to define a function using ‘‘-f foo=bar’’, an attempt is made to assign a value to a readonly variable, an attempt is made to assign a value to an array variable without using the compound assignment syntax (see Arrays above), one of the names is not a valid shell variable name, an attempt is made to turn off readonly status for a readonly variable, an attempt is made to turn off array status for an array variable, or an attempt is made to display a non-exis- tent function with -f. dirs [-clpv] [+n] [-n] Without options, displays the list of currently remembered directories. The default display is on a single line with directory names separated by spaces. Directories are added to the list with the pushd command; the popd command removes entries from the list. +n Displays the nth entry counting from the left of the list shown by dirs when invoked without options, starting with zero. -n Displays the nth entry counting from the right of the list shown by dirs when invoked without options, starting with zero. -c Clears the directory stack by deleting all of the entries. -l Produces a longer listing; the default listing format uses a tilde to denote the home directory. -p Print the directory stack with one entry per line. -v Print the directory stack with one entry per line, prefixing each entry with its index in the stack. The return value is 0 unless an invalid option is supplied or n indexes beyond the end of the directory stack. disown [-ar] [-h] [jobspec ...] Without options, each jobspec is removed from the table of active jobs. If the -h option is given, each jobspec is not removed from the table, but is marked so that SIGHUP is not sent to the job if the shell receives a SIGHUP. If no jobspec is present, and neither the -a nor the -r option is supplied, the current job is used. If no jobspec is supplied, the -a option means to remove or mark all jobs; the -r option without a jobspec argument restricts operation to running jobs. The return value is 0 unless a jobspec does not specify a valid job. echo [-neE] [arg ...] Output the args, separated by spaces, followed by a newline. The return status is always 0. If -n is specified, the trailing newline is suppressed. If the -e option is given, interpretation of the following backslash-escaped characters is enabled. The -E option disables the interpretation of these escape characters, even on systems where they are interpreted by default. The xpg_echo shell option may be used to dynamically determine whether or not echo expands these escape characters by default. echo does not interpret -- to mean the end of options. echo interprets the following escape sequences: \a alert (bell) \b backspace \c suppress trailing newline \e an escape character \f form feed \n new line \r carriage return \t horizontal tab \v vertical tab \\ backslash \0nnn the eight-bit character whose value is the octal value nnn (zero to three octal digits) \nnn the eight-bit character whose value is the octal value nnn (one to three octal digits) \xHH the eight-bit character whose value is the hexadecimal value HH (one or two hex digits) enable [-adnps] [-f filename] [name ...] Enable and disable builtin shell commands. Disabling a builtin allows a disk command which has the same name as a shell builtin to be executed without specifying a full pathname, even though the shell normally searches for builtins before disk commands. If -n is used, each name is disabled; otherwise, names are enabled. For example, to use the test binary found via the PATH instead of the shell builtin version, run ‘‘enable -n test’’. The -f option means to load the new builtin command name from shared object filename, on systems that support dynamic loading. The -d option will delete a builtin previously loaded with -f. If no name arguments are given, or if the -p option is supplied, a list of shell builtins is printed. With no other option arguments, the list consists of all enabled shell builtins. If -n is supplied, only disabled builtins are printed. If -a is supplied, the list printed includes all builtins, with an indication of whether or not each is enabled. If -s is supplied, the output is restricted to the POSIX special builtins. The return value is 0 unless a name is not a shell builtin or there is an error loading a new builtin from a shared object. eval [arg ...] The args are read and concatenated together into a single command. This command is then read and executed by the shell, and its exit status is returned as the value of eval. If there are no args, or only null arguments, eval returns 0. exec [-cl] [-a name] [command [arguments]] If command is specified, it replaces the shell. No new process is created. The arguments become the arguments to command. If the -l option is supplied, the shell places a dash at the beginning of the zeroth arg passed to command. This is what login(1) does. The -c option causes command to be executed with an empty environ- ment. If -a is supplied, the shell passes name as the zeroth argument to the exe- cuted command. If command cannot be executed for some reason, a non-interactive shell exits, unless the shell option execfail is enabled, in which case it returns failure. An interactive shell returns failure if the file cannot be executed. If command is not specified, any redirections take effect in the current shell, and the return status is 0. If there is a redirection error, the return status is 1. exit [n] Cause the shell to exit with a status of n. If n is omitted, the exit status is that of the last command executed. A trap on EXIT is executed before the shell termi- nates. export [-fn] [name[=word]] ... export -p The supplied names are marked for automatic export to the environment of subsequently executed commands. If the -f option is given, the names refer to functions. If no names are given, or if the -p option is supplied, a list of all names that are exported in this shell is printed. The -n option causes the export property to be removed from each name. If a variable name is followed by =word, the value of the variable is set to word. export returns an exit status of 0 unless an invalid option is encountered, one of the names is not a valid shell variable name, or -f is sup- plied with a name that is not a function. fc [-e ename] [-nlr] [first] [last] fc -s [pat=rep] [cmd] Fix Command. In the first form, a range of commands from first to last is selected from the history list. First and last may be specified as a string (to locate the last command beginning with that string) or as a number (an index into the history list, where a negative number is used as an offset from the current command number). If last is not specified it is set to the current command for listing (so that ‘‘fc -l -10’’ prints the last 10 commands) and to first otherwise. If first is not speci- fied it is set to the previous command for editing and -16 for listing. The -n option suppresses the command numbers when listing. The -r option reverses the order of the commands. If the -l option is given, the commands are listed on standard output. Otherwise, the editor given by ename is invoked on a file contain- ing those commands. If ename is not given, the value of the FCEDIT variable is used, and the value of EDITOR if FCEDIT is not set. If neither variable is set, is used. When editing is complete, the edited commands are echoed and executed. In the second form, command is re-executed after each instance of pat is replaced by rep. A useful alias to use with this is ‘‘r="fc -s"’’, so that typing ‘‘r cc’’ runs the last command beginning with ‘‘cc’’ and typing ‘‘r’’ re-executes the last command. If the first form is used, the return value is 0 unless an invalid option is encoun- tered or first or last specify history lines out of range. If the -e option is sup- plied, the return value is the value of the last command executed or failure if an error occurs with the temporary file of commands. If the second form is used, the return status is that of the command re-executed, unless cmd does not specify a valid history line, in which case fc returns failure. fg [jobspec] Resume jobspec in the foreground, and make it the current job. If jobspec is not present, the shell’s notion of the current job is used. The return value is that of the command placed into the foreground, or failure if run when job control is dis- abled or, when run with job control enabled, if jobspec does not specify a valid job or jobspec specifies a job that was started without job control. getopts optstring name [args] getopts is used by shell procedures to parse positional parameters. optstring con- tains the option characters to be recognized; if a character is followed by a colon, the option is expected to have an argument, which should be separated from it by white space. The colon and question mark characters may not be used as option char- acters. Each time it is invoked, getopts places the next option in the shell vari- able name, initializing name if it does not exist, and the index of the next argument to be processed into the variable OPTIND. OPTIND is initialized to 1 each time the shell or a shell script is invoked. When an option requires an argument, getopts places that argument into the variable OPTARG. The shell does not reset OPTIND auto- matically; it must be manually reset between multiple calls to getopts within the same shell invocation if a new set of parameters is to be used. When the end of options is encountered, getopts exits with a return value greater than zero. OPTIND is set to the index of the first non-option argument, and name is set to ?. getopts normally parses the positional parameters, but if more arguments are given in args, getopts parses those instead. getopts can report errors in two ways. If the first character of optstring is a colon, silent error reporting is used. In normal operation diagnostic messages are printed when invalid options or missing option arguments are encountered. If the variable OPTERR is set to 0, no error messages will be displayed, even if the first character of optstring is not a colon. If an invalid option is seen, getopts places ? into name and, if not silent, prints an error message and unsets OPTARG. If getopts is silent, the option character found is placed in OPTARG and no diagnostic message is printed. If a required argument is not found, and getopts is not silent, a question mark (?) is placed in name, OPTARG is unset, and a diagnostic message is printed. If getopts is silent, then a colon (:) is placed in name and OPTARG is set to the option charac- ter found. getopts returns true if an option, specified or unspecified, is found. It returns false if the end of options is encountered or an error occurs. hash [-lr] [-p filename] [-dt] [name] For each name, the full file name of the command is determined by searching the directories in $PATH and remembered. If the -p option is supplied, no path search is performed, and filename is used as the full file name of the command. The -r option causes the shell to forget all remembered locations. The -d option causes the shell to forget the remembered location of each name. If the -t option is supplied, the full pathname to which each name corresponds is printed. If multiple name arguments are supplied with -t, the name is printed before the hashed full pathname. The -l option causes output to be displayed in a format that may be reused as input. If no arguments are given, or if only -l is supplied, information about remembered commands is printed. The return status is true unless a name is not found or an invalid option is supplied. help [-s] [pattern] Display helpful information about builtin commands. If pattern is specified, help gives detailed help on all commands matching pattern; otherwise help for all the builtins and shell control structures is printed. The -s option restricts the infor- mation displayed to a short usage synopsis. The return status is 0 unless no command matches pattern. history [n] history -c history -d offset history -anrw [filename] history -p arg [arg ...] history -s arg [arg ...] With no options, display the command history list with line numbers. Lines listed with a * have been modified. An argument of n lists only the last n lines. If the shell variable HISTTIMEFORMAT is set and not null, it is used as a format string for strftime(3) to display the time stamp associated with each displayed history entry. No intervening blank is printed between the formatted time stamp and the history line. If filename is supplied, it is used as the name of the history file; if not, the value of HISTFILE is used. Options, if supplied, have the following meanings: -c Clear the history list by deleting all the entries. -d offset Delete the history entry at position offset. -a Append the ‘‘new’’ history lines (history lines entered since the beginning of the current bash session) to the history file. -n Read the history lines not already read from the history file into the current history list. These are lines appended to the history file since the begin- ning of the current bash session. -r Read the contents of the history file and use them as the current history. -w Write the current history to the history file, overwriting the history file’s contents. -p Perform history substitution on the following args and display the result on the standard output. Does not store the results in the history list. Each arg must be quoted to disable normal history expansion. -s Store the args in the history list as a single entry. The last command in the history list is removed before the args are added. If the HISTTIMEFORMAT is set, the time stamp information associated with each history entry is written to the history file. The return value is 0 unless an invalid option is encountered, an error occurs while reading or writing the history file, an invalid offset is supplied as an argument to -d, or the history expansion supplied as an argument to -p fails. jobs [-lnprs] [ jobspec ... ] jobs -x command [ args ... ] The first form lists the active jobs. The options have the following meanings: -l List process IDs in addition to the normal information. -p List only the process ID of the job’s process group leader. -n Display information only about jobs that have changed status since the user was last notified of their status. -r Restrict output to running jobs. -s Restrict output to stopped jobs. If jobspec is given, output is restricted to information about that job. The return status is 0 unless an invalid option is encountered or an invalid jobspec is sup- plied. If the -x option is supplied, jobs replaces any jobspec found in command or args with the corresponding process group ID, and executes command passing it args, returning its exit status. kill [-s sigspec | -n signum | -sigspec] [pid | jobspec] ... kill -l [sigspec | exit_status] Send the signal named by sigspec or signum to the processes named by pid or jobspec. sigspec is either a case-insensitive signal name such as SIGKILL (with or without the SIG prefix) or a signal number; signum is a signal number. If sigspec is not present, then SIGTERM is assumed. An argument of -l lists the signal names. If any arguments are supplied when -l is given, the names of the signals corresponding to the arguments are listed, and the return status is 0. The exit_status argument to -l is a number specifying either a signal number or the exit status of a process termi- nated by a signal. kill returns true if at least one signal was successfully sent, or false if an error occurs or an invalid option is encountered. let arg [arg ...] Each arg is an arithmetic expression to be evaluated (see ARITHMETIC EVALUATION). If the last arg evaluates to 0, let returns 1; 0 is returned otherwise. local [option] [name[=value] ...] For each argument, a local variable named name is created, and assigned value. The option can be any of the options accepted by declare. When local is used within a function, it causes the variable name to have a visible scope restricted to that function and its children. With no operands, local writes a list of local variables to the standard output. It is an error to use local when not within a function. The return status is 0 unless local is used outside a function, an invalid name is sup- plied, or name is a readonly variable. logout Exit a login shell. popd [-n] [+n] [-n] Removes entries from the directory stack. With no arguments, removes the top direc- tory from the stack, and performs a cd to the new top directory. Arguments, if sup- plied, have the following meanings: +n Removes the nth entry counting from the left of the list shown by dirs, start- ing with zero. For example: ‘‘popd +0’’ removes the first directory, ‘‘popd +1’’ the second. -n Removes the nth entry counting from the right of the list shown by dirs, starting with zero. For example: ‘‘popd -0’’ removes the last directory, ‘‘popd -1’’ the next to last. -n Suppresses the normal change of directory when removing directories from the stack, so that only the stack is manipulated. If the popd command is successful, a dirs is performed as well, and the return status is 0. popd returns false if an invalid option is encountered, the directory stack is empty, a non-existent directory stack entry is specified, or the directory change fails. printf [-v var] format [arguments] Write the formatted arguments to the standard output under the control of the format. The format is a character string which contains three types of objects: plain charac- ters, which are simply copied to standard output, character escape sequences, which are converted and copied to the standard output, and format specifications, each of which causes printing of the next successive argument. In addition to the standard printf(1) formats, %b causes printf to expand backslash escape sequences in the cor- responding argument (except that \c terminates output, backslashes in \', \", and \? are not removed, and octal escapes beginning with \0 may contain up to four digits), and %q causes printf to output the corresponding argument in a format that can be reused as shell input. The -v option causes the output to be assigned to the variable var rather than being printed to the standard output. The format is reused as necessary to consume all of the arguments. If the format requires more arguments than are supplied, the extra format specifications behave as if a zero value or null string, as appropriate, had been supplied. The return value is zero on success, non-zero on failure. pushd [-n] [dir] pushd [-n] [+n] [-n] Adds a directory to the top of the directory stack, or rotates the stack, making the new top of the stack the current working directory. With no arguments, exchanges the top two directories and returns 0, unless the directory stack is empty. Arguments, if supplied, have the following meanings: +n Rotates the stack so that the nth directory (counting from the left of the list shown by dirs, starting with zero) is at the top. -n Rotates the stack so that the nth directory (counting from the right of the list shown by dirs, starting with zero) is at the top. -n Suppresses the normal change of directory when adding directories to the stack, so that only the stack is manipulated. dir Adds dir to the directory stack at the top, making it the new current working directory. If the pushd command is successful, a dirs is performed as well. If the first form is used, pushd returns 0 unless the cd to dir fails. With the second form, pushd returns 0 unless the directory stack is empty, a non-existent directory stack element is specified, or the directory change to the specified new current directory fails. pwd [-LP] Print the absolute pathname of the current working directory. The pathname printed contains no symbolic links if the -P option is supplied or the -o physical option to the set builtin command is enabled. If the -L option is used, the pathname printed may contain symbolic links. The return status is 0 unless an error occurs while reading the name of the current directory or an invalid option is supplied. read [-ers] [-u fd] [-t timeout] [-a aname] [-p prompt] [-n nchars] [-d delim] [name ...] One line is read from the standard input, or from the file descriptor fd supplied as an argument to the -u option, and the first word is assigned to the first name, the second word to the second name, and so on, with leftover words and their intervening separators assigned to the last name. If there are fewer words read from the input stream than names, the remaining names are assigned empty values. The characters in IFS are used to split the line into words. The backslash character (\) may be used to remove any special meaning for the next character read and for line continuation. Options, if supplied, have the following meanings: -a aname The words are assigned to sequential indices of the array variable aname, starting at 0. aname is unset before any new values are assigned. Other name arguments are ignored. -d delim The first character of delim is used to terminate the input line, rather than newline. -e If the standard input is coming from a terminal, readline (see READLINE above) is used to obtain the line. -n nchars read returns after reading nchars characters rather than waiting for a com- plete line of input. -p prompt Display prompt on standard error, without a trailing newline, before attempt- ing to read any input. The prompt is displayed only if input is coming from a terminal. -r Backslash does not act as an escape character. The backslash is considered to be part of the line. In particular, a backslash-newline pair may not be used as a line continuation. -s Silent mode. If input is coming from a terminal, characters are not echoed. -t timeout Cause read to time out and return failure if a complete line of input is not read within timeout seconds. This option has no effect if read is not reading input from the terminal or a pipe. -u fd Read input from file descriptor fd. If no names are supplied, the line read is assigned to the variable REPLY. The return code is zero, unless end-of-file is encountered, read times out, or an invalid file descriptor is supplied as the argument to -u. readonly [-apf] [name[=word] ...] The given names are marked readonly; the values of these names may not be changed by subsequent assignment. If the -f option is supplied, the functions corresponding to the names are so marked. The -a option restricts the variables to arrays. If no name arguments are given, or if the -p option is supplied, a list of all readonly names is printed. The -p option causes output to be displayed in a format that may be reused as input. If a variable name is followed by =word, the value of the vari- able is set to word. The return status is 0 unless an invalid option is encountered, one of the names is not a valid shell variable name, or -f is supplied with a name that is not a function. return [n] Causes a function to exit with the return value specified by n. If n is omitted, the return status is that of the last command executed in the function body. If used outside a function, but during execution of a script by the . (source) command, it causes the shell to stop executing that script and return either n or the exit status of the last command executed within the script as the exit status of the script. If used outside a function and not during execution of a script by ., the return status is false. Any command associated with the RETURN trap is executed before execution resumes after the function or script. set [--abefhkmnptuvxBCHP] [-o option] [arg ...] Without options, the name and value of each shell variable are displayed in a format that can be reused as input for setting or resetting the currently-set variables. Read-only variables cannot be reset. In posix mode, only shell variables are listed. The output is sorted according to the current locale. When options are specified, they set or unset shell attributes. Any arguments remaining after the options are processed are treated as values for the positional parameters and are assigned, in order, to $1, $2, ... $n. Options, if specified, have the following meanings: -a Automatically mark variables and functions which are modified or created for export to the environment of subsequent commands. -b Report the status of terminated background jobs immediately, rather than before the next primary prompt. This is effective only when job control is enabled. -e Exit immediately if a simple command (see SHELL GRAMMAR above) exits with a non-zero status. The shell does not exit if the command that fails is part of the command list immediately following a while or until keyword, part of the test in an if statement, part of a && or ││ list, or if the command’s return value is being inverted via !. A trap on ERR, if set, is executed before the shell exits. -f Disable pathname expansion. -h Remember the location of commands as they are looked up for execution. This is enabled by default. -k All arguments in the form of assignment statements are placed in the environ- ment for a command, not just those that precede the command name. -m Monitor mode. Job control is enabled. This option is on by default for interactive shells on systems that support it (see JOB CONTROL above). Back- ground processes run in a separate process group and a line containing their exit status is printed upon their completion. -n Read commands but do not execute them. This may be used to check a shell script for syntax errors. This is ignored by interactive shells. -o option-name The option-name can be one of the following: allexport Same as -a. braceexpand Same as -B. emacs Use an emacs-style command line editing interface. This is enabled by default when the shell is interactive, unless the shell is started with the --noediting option. errtrace Same as -E. functrace Same as -T. errexit Same as -e. hashall Same as -h. histexpand Same as -H. history Enable command history, as described above under HISTORY. This option is on by default in interactive shells. ignoreeof The effect is as if the shell command ‘‘IGNOREEOF=10’’ had been exe- cuted (see Shell Variables above). keyword Same as -k. monitor Same as -m. noclobber Same as -C. noexec Same as -n. noglob Same as -f. nolog Currently ignored. notify Same as -b. nounset Same as -u. onecmd Same as -t. physical Same as -P. pipefail If set, the return value of a pipeline is the value of the last (rightmost) command to exit with a non-zero status, or zero if all command
Table of Contents Summary of gdb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Free Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Free Software Needs Free Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Contributors to gdb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 A Sample gdb Session . . . . . . . . . . . . . . . . . . . . . . 7 2 Getting In and Out of gdb . . . . . . . . . . . . . . . . 11 2.1 Invoking gdb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.1 Choosing Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.2 Choosing Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.3 What gdb Does During Startup . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Quitting gdb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Shell Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 Logging Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 11 12 13 15 16 16 16 gdb Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3.1 Command Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3.2 Command Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3.3 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4 Running Programs Under gdb . . . . . . . . . . . . . 25 4.1 Compiling for Debugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Starting your Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 Your Program’s Arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 Your Program’s Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 Your Program’s Working Directory . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 Your Program’s Input and Output . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 Debugging an Already-running Process . . . . . . . . . . . . . . . . . . . . . . 4.8 Killing the Child Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 Debugging Programs with Multiple Threads . . . . . . . . . . . . . . . . . . 4.10 Debugging Programs with Multiple Processes. . . . . . . . . . . . . . . . 4.11 Setting a Bookmark to Return to Later . . . . . . . . . . . . . . . . . . . . . 4.11.1 A Non-obvious Benefit of Using Checkpoints . . . . . . . . . . . . 5 25 26 28 28 29 29 30 31 31 34 36 37 Stopping and Continuing . . . . . . . . . . . . . . . . . . 39 5.1 Breakpoints, Watchpoints, and Catchpoints . . . . . . . . . . . . . . . . . . 5.1.1 Setting Breakpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.2 Setting Watchpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.3 Setting Catchpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.4 Deleting Breakpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 40 45 47 49 ii Debugging with gdb 5.1.5 Disabling Breakpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.6 Break Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.7 Breakpoint Command Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.8 “Cannot insert breakpoints” . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.9 “Breakpoint address adjusted...” . . . . . . . . . . . . . . . . . . . . . . . . 5.2 Continuing and Stepping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Stopping and Starting Multi-thread Programs . . . . . . . . . . . . . . . . 6 Examining the Stack . . . . . . . . . . . . . . . . . . . . . . 61 6.1 6.2 6.3 6.4 7 Stack Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Backtraces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting a Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information About a Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 62 64 65 Examining Source Files . . . . . . . . . . . . . . . . . . . 67 7.1 Printing Source Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2 Specifying a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.3 Editing Source Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.3.1 Choosing your Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.4 Searching Source Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5 Specifying Source Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6 Source and Machine Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 49 50 52 53 53 54 57 59 67 68 69 69 70 70 72 Examining Data . . . . . . . . . . . . . . . . . . . . . . . . . . 75 8.1 Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2 Ambiguous Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3 Program Variables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.4 Artificial Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 Output Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.6 Examining Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7 Automatic Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.8 Print Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.9 Value History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.10 Convenience Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.11 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.12 Floating Point Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.13 Vector Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.14 Operating System Auxiliary Information . . . . . . . . . . . . . . . . . . . . 8.15 Memory Region Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.15.1 Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.15.1.1 Memory Access Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.15.1.2 Memory Access Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.15.1.3 Data Cache . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.15.2 Memory Access Checking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.16 Copy Between Memory and a File . . . . . . . . . . . . . . . . . . . . . . . . . . 8.17 How to Produce a Core File from Your Program . . . . . . . . . . . . . 75 76 77 79 79 81 82 84 90 90 92 93 94 94 94 95 95 96 96 96 96 97 iii 8.18 Character Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 8.19 Caching Data of Remote Targets . . . . . . . . . . . . . . . . . . . . . . . . . . 100 8.20 Search Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 9 C Preprocessor Macros . . . . . . . . . . . . . . . . . . 103 10 Tracepoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 10.1 Commands to Set Tracepoints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1.1 Create and Delete Tracepoints . . . . . . . . . . . . . . . . . . . . . . . . 10.1.2 Enable and Disable Tracepoints . . . . . . . . . . . . . . . . . . . . . . . 10.1.3 Tracepoint Passcounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1.4 Tracepoint Action Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1.5 Listing Tracepoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1.6 Starting and Stopping Trace Experiments . . . . . . . . . . . . . 10.2 Using the Collected Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2.1 tfind n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2.2 tdump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2.3 save-tracepoints filename . . . . . . . . . . . . . . . . . . . . . . . . 10.3 Convenience Variables for Tracepoints . . . . . . . . . . . . . . . . . . . . . 11 Debugging Programs That Use Overlays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 11.1 11.2 11.3 11.4 12 107 107 108 108 109 110 110 111 111 113 114 114 How Overlays Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overlay Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic Overlay Debugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overlay Sample Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 116 118 119 Using gdb with Different Languages . . . . . 121 12.1 Switching Between Source Languages . . . . . . . . . . . . . . . . . . . . . . 12.1.1 List of Filename Extensions and Languages . . . . . . . . . . . . 12.1.2 Setting the Working Language . . . . . . . . . . . . . . . . . . . . . . . . 12.1.3 Having gdb Infer the Source Language . . . . . . . . . . . . . . . . 12.2 Displaying the Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.3 Type and Range Checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.3.1 An Overview of Type Checking . . . . . . . . . . . . . . . . . . . . . . . 12.3.2 An Overview of Range Checking . . . . . . . . . . . . . . . . . . . . . . 12.4 Supported Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.1 C and C++ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.1.1 C and C++ Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.1.2 C and C++ Constants . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.1.3 C++ Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.1.4 C and C++ Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.1.5 C and C++ Type and Range Checks . . . . . . . . . . . . . . 12.4.1.6 gdb and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.1.7 gdb Features for C++ . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.1.8 Decimal Floating Point format . . . . . . . . . . . . . . . . . . . 12.4.2 Objective-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 121 122 122 122 123 123 124 125 125 126 127 128 129 129 129 130 131 131 iv Debugging with gdb 12.4.2.1 Method Names in Commands . . . . . . . . . . . . . . . . . . . . 12.4.2.2 The Print Command With Objective-C . . . . . . . . . . . 12.4.3 Fortran . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.3.1 Fortran Operators and Expressions . . . . . . . . . . . . . . . 12.4.3.2 Fortran Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.3.3 Special Fortran Commands . . . . . . . . . . . . . . . . . . . . . . 12.4.4 Pascal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.5 Modula-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.5.1 Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.5.2 Built-in Functions and Procedures . . . . . . . . . . . . . . . . 12.4.5.3 Constants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.5.4 Modula-2 Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.5.5 Modula-2 Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.5.6 Deviations from Standard Modula-2 . . . . . . . . . . . . . . 12.4.5.7 Modula-2 Type and Range Checks . . . . . . . . . . . . . . . 12.4.5.8 The Scope Operators :: and . . . . . . . . . . . . . . . . . . . . 12.4.5.9 gdb and Modula-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.6 Ada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.6.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.6.2 Omissions from Ada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.6.3 Additions to Ada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4.6.4 Stopping at the Very Beginning . . . . . . . . . . . . . . . . . . 12.4.6.5 Known Peculiarities of Ada Mode . . . . . . . . . . . . . . . . 12.5 Unsupported Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 132 132 132 133 133 133 133 133 135 136 136 138 138 138 139 139 139 139 140 141 143 143 143 13 Examining the Symbol Table . . . . . . . . . . . . 145 14 Altering Execution . . . . . . . . . . . . . . . . . . . . . 151 14.1 14.2 14.3 14.4 14.5 14.6 15 Assignment to Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuing at a Different Address . . . . . . . . . . . . . . . . . . . . . . . . . Giving your Program a Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Returning from a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Calling Program Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Patching Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 152 153 153 154 154 gdb Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 15.1 Commands to Specify Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 15.2 Debugging Information in Separate Files . . . . . . . . . . . . . . . . . . . 163 15.3 Errors Reading Symbol Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 16 Specifying a Debugging Target . . . . . . . . . . 169 16.1 Active Targets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 16.2 Commands for Managing Targets . . . . . . . . . . . . . . . . . . . . . . . . . . 170 16.3 Choosing Target Byte Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 v 17 Debugging Remote Programs . . . . . . . . . . . 173 17.1 Connecting to a Remote Target . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.2 Sending files to a remote system . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.3 Using the gdbserver Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.3.1 Running gdbserver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.3.1.1 Attaching to a Running Program . . . . . . . . . . . . . . . . . 17.3.1.2 Multi-Process Mode for gdbserver . . . . . . . . . . . . . . . 17.3.1.3 Other Command-Line Arguments for gdbserver . . 17.3.2 Connecting to gdbserver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.3.3 Monitor Commands for gdbserver . . . . . . . . . . . . . . . . . . . . 17.4 Remote Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.5 Implementing a Remote Stub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.5.1 What the Stub Can Do for You . . . . . . . . . . . . . . . . . . . . . . . 17.5.2 What You Must Do for the Stub . . . . . . . . . . . . . . . . . . . . . . 17.5.3 Putting it All Together. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 173 175 175 175 176 176 177 177 177 178 181 182 183 184 Configuration-Specific Information . . . . . . . 185 18.1 Native. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.1.1 HP-UX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.1.2 BSD libkvm Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.1.3 SVR4 Process Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.1.4 Features for Debugging djgpp Programs . . . . . . . . . . . . . . 18.1.5 Features for Debugging MS Windows PE Executables . . 18.1.5.1 Support for DLLs without Debugging Symbols . . . . 18.1.5.2 DLL Name Prefixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.1.5.3 Working with Minimal Symbols . . . . . . . . . . . . . . . . . . 18.1.6 Commands Specific to gnu Hurd Systems . . . . . . . . . . . . . 18.1.7 QNX Neutrino . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.2 Embedded Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.2.1 Using gdb with VxWorks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.2.1.1 Connecting to VxWorks . . . . . . . . . . . . . . . . . . . . . . . . . 18.2.1.2 VxWorks Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.2.1.3 Running Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3 Embedded Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.1 ARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.2 Renesas M32R/D and M32R/SDI . . . . . . . . . . . . . . . . . . . . . 18.3.3 M68k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.4 MIPS Embedded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.5 OpenRISC 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.6 PowerPC Embedded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.7 HP PA Embedded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.8 Tsqware Sparclet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.8.1 Setting File to Debug . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.8.2 Connecting to Sparclet . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.8.3 Sparclet Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.8.4 Running and Debugging . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.9 Fujitsu Sparclite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.10 Zilog Z8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 185 185 185 187 189 190 190 191 192 194 194 194 195 195 196 196 196 198 199 199 201 203 204 204 204 205 205 205 205 205 vi Debugging with gdb 18.3.11 Atmel AVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.12 CRIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3.13 Renesas Super-H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.4 Architectures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.4.1 x86 Architecture-specific Issues . . . . . . . . . . . . . . . . . . . . . . . 18.4.2 A29K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.4.3 Alpha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.4.4 MIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.4.5 HPPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.4.6 Cell Broadband Engine SPU architecture . . . . . . . . . . . . . . 18.4.7 PowerPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Controlling gdb . . . . . . . . . . . . . . . . . . . . . . . . 211 19.1 19.2 19.3 19.4 19.5 19.6 19.7 19.8 20 206 206 207 207 207 207 207 208 209 209 210 Prompt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Command Editing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Command History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuring the Current ABI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Warnings and Messages . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Messages about Internal Happenings . . . . . . . . . . . . . . 211 211 211 213 214 214 215 217 Canned Sequences of Commands . . . . . . . . 221 20.1 20.2 20.3 20.4 User-defined Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User-defined Command Hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Command Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Commands for Controlled Output . . . . . . . . . . . . . . . . . . . . . . . . . 221 222 223 224 21 Command Interpreters . . . . . . . . . . . . . . . . . . 227 22 gdb Text User Interface . . . . . . . . . . . . . . . . . 229 22.1 22.2 22.3 22.4 22.5 23 TUI Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TUI Key Bindings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TUI Single Key Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TUI-specific Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TUI Configuration Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 230 231 231 233 Using gdb under gnu Emacs . . . . . . . . . . . . 235 vii 24 The gdb/mi Interface . . . . . . . . . . . . . . . . . . . 237 Function and Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notation and Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.3 gdb/mi Command Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.3.1 gdb/mi Input Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.3.2 gdb/mi Output Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.4 gdb/mi Compatibility with CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.5 gdb/mi Development and Front Ends . . . . . . . . . . . . . . . . . . . . . 24.6 gdb/mi Output Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.6.1 gdb/mi Result Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.6.2 gdb/mi Stream Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.6.3 gdb/mi Async Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.7 Simple Examples of gdb/mi Interaction. . . . . . . . . . . . . . . . . . . . 24.8 gdb/mi Command Description Format . . . . . . . . . . . . . . . . . . . . 24.9 gdb/mi Breakpoint Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.10 gdb/mi Program Context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.11 gdb/mi Thread Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.12 gdb/mi Program Execution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.13 gdb/mi Stack Manipulation Commands . . . . . . . . . . . . . . . . . . 24.14 gdb/mi Variable Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.15 gdb/mi Data Manipulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.16 gdb/mi Tracepoint Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.17 gdb/mi Symbol Query Commands . . . . . . . . . . . . . . . . . . . . . . . 24.18 gdb/mi File Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.19 gdb/mi Target Manipulation Commands . . . . . . . . . . . . . . . . . 24.20 gdb/mi File Transfer Commands . . . . . . . . . . . . . . . . . . . . . . . . . 24.21 Miscellaneous gdb/mi Commands . . . . . . . . . . . . . . . . . . . . . . . . 25 gdb Annotations . . . . . . . . . . . . . . . . . . . . . . . 293 25.1 25.2 25.3 25.4 25.5 25.6 25.7 26 237 237 237 237 238 240 240 240 240 241 241 242 243 244 251 254 255 261 265 271 277 277 280 283 287 288 What is an Annotation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Server Prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Annotation for gdb Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Invalidation Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Running the Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Displaying Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293 294 294 294 295 295 296 Reporting Bugs in gdb . . . . . . . . . . . . . . . . . . 297 26.1 Have You Found a Bug? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 26.2 How to Report Bugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 viii Debugging with gdb 27 Command Line Editing . . . . . . . . . . . . . . . . . 301 27.1 Introduction to Line Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.2 Readline Interaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.2.1 Readline Bare Essentials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.2.2 Readline Movement Commands . . . . . . . . . . . . . . . . . . . . . . . 27.2.3 Readline Killing Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 27.2.4 Readline Arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.2.5 Searching for Commands in the History . . . . . . . . . . . . . . . 27.3 Readline Init File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.3.1 Readline Init File Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.3.2 Conditional Init Constructs . . . . . . . . . . . . . . . . . . . . . . . . . . 27.3.3 Sample Init File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.4 Bindable Readline Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.4.1 Commands For Moving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.4.2 Commands For Manipulating The History . . . . . . . . . . . . . 27.4.3 Commands For Changing Text . . . . . . . . . . . . . . . . . . . . . . . 27.4.4 Killing And Yanking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.4.5 Specifying Numeric Arguments . . . . . . . . . . . . . . . . . . . . . . . 27.4.6 Letting Readline Type For You . . . . . . . . . . . . . . . . . . . . . . . 27.4.7 Keyboard Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.4.8 Some Miscellaneous Commands . . . . . . . . . . . . . . . . . . . . . . . 27.5 Readline vi Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 301 301 301 302 302 303 303 304 304 309 310 313 313 313 315 316 317 317 317 318 319 Using History Interactively . . . . . . . . . . . . . . 321 28.1 History Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.1.1 Event Designators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.1.2 Word Designators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.1.3 Modifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 321 321 322 Appendix A Formatting Documentation . . . . 325 Appendix B Installing gdb . . . . . . . . . . . . . . . . 327 B.1 B.2 B.3 B.4 B.5 Requirements for Building gdb . . . . . . . . . . . . . . . . . . . . . . . . . . . . Invoking the gdb ‘configure’ Script . . . . . . . . . . . . . . . . . . . . . . . Compiling gdb in Another Directory . . . . . . . . . . . . . . . . . . . . . . . Specifying Names for Hosts and Targets . . . . . . . . . . . . . . . . . . . . ‘configure’ Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Appendix C 327 327 329 330 330 Maintenance Commands . . . . . . 333 ix Appendix D gdb Remote Serial Protocol . . . 339 D.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.2 Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.3 Stop Reply Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.4 General Query Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.5 Register Packet Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.6 Tracepoint Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.7 Host I/O Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.8 Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.9 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10 File-I/O Remote Protocol Extension . . . . . . . . . . . . . . . . . . . . . . D.10.1 File-I/O Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10.2 Protocol Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10.3 The F Request Packet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10.4 The F Reply Packet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10.5 The ‘Ctrl-C’ Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10.6 Console I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10.7 List of Supported Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lseek . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . rename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . stat/fstat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . gettimeofday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . isatty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10.8 Protocol-specific Representation of Datatypes . . . . . . . . . Integral Datatypes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pointer Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Memory Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . struct stat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . struct timeval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10.9 Constants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Open Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mode t Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Errno Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lseek Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.10.10 File-I/O Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.11 Library List Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.12 Memory Map Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339 340 347 348 358 358 360 362 362 363 363 363 364 364 365 365 365 366 367 367 367 368 368 369 369 370 370 370 371 371 371 372 372 372 373 373 373 373 374 374 374 375 376 x Debugging with gdb Appendix E The GDB Agent Expression Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377 E.1 E.2 E.3 E.4 E.5 E.6 General Bytecode Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bytecode Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Agent Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Varying Target Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tracing on Symmetrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Appendix F 377 379 383 384 384 386 Target Descriptions . . . . . . . . . . . 389 F.1 Retrieving Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.2 Target Description Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.2.1 Inclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.2.2 Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.2.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.2.4 Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.2.5 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.3 Predefined Target Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.4 Standard Target Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.4.1 ARM Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.4.2 MIPS Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.4.3 M68K Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F.4.4 PowerPC Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389 390 390 390 391 391 391 392 393 393 393 394 394 Appendix G GNU GENERAL PUBLIC LICENSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395 Preamble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395 TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION . . . . . . . . . . . . . . . . . . . 396 How to Apply These Terms to Your New Programs . . . . . . . . . . . . . . . 400 Appendix H GNU Free Documentation License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401 H.1 ADDENDUM: How to use this License for your documents . . 407 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409 1 Summary of gdb The purpose of a debugger such as gdb is to allow you to see what is going on “inside” another program while it executes—or what another program was doing at the moment it crashed. gdb can do four main kinds of things (plus other things in support of these) to help you catch bugs in the act: • Start your program, specifying anything that might affect its behavior. • Make your program stop on specified conditions. • Examine what has happened, when your program has stopped. • Change things in your program, so you can experiment with correcting the effects of one bug and go on to learn about another. You can use gdb to debug programs written in C and C++. For more information, see Section 12.4 [Supported Languages], page 125. For more information, see Section 12.4.1 [C and C++], page 125. Support for Modula-2 is partial. [Modula-2], page 133. For information on Modula-2, see Section 12.4.5 Debugging Pascal programs which use sets, subranges, file variables, or nested functions does not currently work. gdb does not support entering expressions, printing values, or similar features using Pascal syntax. gdb can be used to debug programs written in Fortran, although it may be necessary to refer to some variables with a trailing underscore. gdb can be used to debug programs written in Objective-C, using either the Ap- ple/NeXT or the GNU Objective-C runtime. Free Software gdb is free software, protected by the gnu General Public License (GPL). The GPL gives you the freedom to copy or adapt a licensed program—but every person getting a copy also gets with it the freedom to modify that copy (which means that they must get access to the source code), and the freedom to distribute further copies. Typical software companies use copyrights to limit your freedoms; the Free Software Foundation uses the GPL to preserve these freedoms. Fundamentally, the General Public License is a license which says that you have these freedoms and that you cannot take these freedoms away from anyone else. Free Software Needs Free Documentation The biggest deficiency in the free software community today is not in the software—it is the lack of good free documentation that we can include with the free software. Many of our most important programs do not come with free reference manuals and free introductory texts. Documentation is an essential part of any software package; when an important free software package does not come with a free manual and a free tutorial, that is a major gap. We have many such gaps today. 2 Debugging with gdb Consider Perl, for instance. The tutorial manuals that people normally use are non-free. How did this come about? Because the authors of those manuals published them with restrictive terms—no copying, no modification, source files not available—which exclude them from the free software world. That wasn’t the first time this sort of thing happened, and it was far from the last. Many times we have heard a GNU user eagerly describe a manual that he is writing, his intended contribution to the community, only to learn that he had ruined everything by signing a publication contract to make it non-free. Free documentation, like free software, is a matter of freedom, not price. The problem with the non-free manual is not that publishers charge a price for printed copies—that in itself is fine. (The Free Software Foundation sells printed copies of manuals, too.) The problem is the restrictions on the use of the manual. Free manuals are available in source code form, and give you permission to copy and modify. Non-free manuals do not allow this. The criteria of freedom for a free manual are roughly the same as for free software. Redistribution (including the normal kinds of commercial redistribution) must be permitted, so that the manual can accompany every copy of the program, both on-line and on paper. Permission for modification of the technical content is crucial too. When people mod- ify the software, adding or changing features, if they are conscientious they will change the manual too—so they can provide accurate and clear documentation for the modified program. A manual that leaves you no choice but to write a new manual to document a changed version of the program is not really available to our community. Some kinds of limits on the way modification is handled are acceptable. For example, requirements to preserve the original author’s copyright notice, the distribution terms, or the list of authors, are ok. It is also no problem to require modified versions to include notice that they were modified. Even entire sections that may not be deleted or changed are acceptable, as long as they deal with nontechnical topics (like this one). These kinds of restrictions are acceptable because they don’t obstruct the community’s normal use of the manual. However, it must be possible to modify all the technical content of the manual, and then distribute the result in all the usual media, through all the usual channels. Otherwise, the restrictions obstruct the use of the manual, it is not free, and we need another manual to replace it. Please spread the word about this issue. Our community continues to lose manuals to proprietary publishing. If we spread the word that free software needs free reference manuals and free tutorials, perhaps the next person who wants to contribute by writing documentation will realize, before it is too late, that only free manuals contribute to the free software community. If you are writing documentation, please insist on publishing it under the GNU Free Documentation License or another free documentation license. Remember that this deci- sion requires your approval—you don’t have to let the publisher decide. Some commercial publishers will use a free license if you insist, but they will not propose the option; it is up to you to raise the issue and say firmly that this is what you want. If the publisher you are dealing with refuses, please try other publishers. If you’re not sure whether a proposed license is free, write to licensing@gnu.org. 3 You can encourage commercial publishers to sell more free, copylefted manuals and tutorials by buying them, and particularly by buying copies from the publishers that paid for their writing or for major improvements. Meanwhile, try to avoid buying non-free documentation at all. Check the distribution terms of a manual before you buy it, and insist that whoever seeks your business must respect your freedom. Check the history of the book, and try to reward the publishers that have paid or pay the authors to work on it. The Free Software Foundation maintains a list of free documentation published by other publishers, at http://www.fsf.org/doc/other-free-books.html. Contributors to gdb Richard Stallman was the original author of gdb, and of many other gnu programs. Many others have contributed to its development. This section attempts to credit major contrib- utors. One of the virtues of free software is that everyone is free to contribute to it; with regret, we cannot actually acknowledge everyone here. The file ‘ChangeLog’ in the gdb distribution approximates a blow-by-blow account. Changes much prior to version 2.0 are lost in the mists of time. Plea: Additions to this section are particularly welcome. If you or your friends (or enemies, to be evenhanded) have been unfairly omitted from this list, we would like to add your names! So that they may not regard their many labors as thankless, we particularly thank those who shepherded gdb through major releases: Andrew Cagney (releases 6.3, 6.2, 6.1, 6.0, 5.3, 5.2, 5.1 and 5.0); Jim Blandy (release 4.18); Jason Molenda (release 4.17); Stan Shebs (release 4.14); Fred Fish (releases 4.16, 4.15, 4.13, 4.12, 4.11, 4.10, and 4.9); Stu Grossman and John Gilmore (releases 4.8, 4.7, 4.6, 4.5, and 4.4); John Gilmore (releases 4.3, 4.2, 4.1, 4.0, and 3.9); Jim Kingdon (releases 3.5, 3.4, and 3.3); and Randy Smith (releases 3.2, 3.1, and 3.0). Richard Stallman, assisted at various times by Peter TerMaat, Chris Hanson, and Richard Mlynarik, handled releases through 2.8. Michael Tiemann is the author of most of the gnu C++ support in gdb, with significant additional contributions from Per Bothner and Daniel Berlin. James Clark wrote the gnu C++ demangler. Early work on C++ was by Peter TerMaat (who also did much general update work leading to release 3.0). gdb uses the BFD subroutine library to examine multiple object-file formats; BFD was a joint project of David V. Henkel-Wallace, Rich Pixley, Steve Chamberlain, and John Gilmore. David Johnson wrote the original COFF support; Pace Willison did the original support for encapsulated COFF. Brent Benson of Harris Computer Systems contributed DWARF 2 support. Adam de Boor and Bradley Davis contributed the ISI Optimum V support. Per Bothner, Noboyuki Hikichi, and Alessandro Forin contributed MIPS support. Jean-Daniel Fekete contributed Sun 386i support. Chris Hanson improved the HP9000 support. Noboyuki Hikichi and Tomoyuki Hasei contributed Sony/News OS 3 support. David Johnson con- tributed Encore Umax support. Jyrki Kuoppala contributed Altos 3068 support. Jeff Law contributed HP PA and SOM support. Keith Packard contributed NS32K support. 4 Debugging with gdb Doug Rabson contributed Acorn Risc Machine support. Bob Rusk contributed Harris Nighthawk CX-UX support. Chris Smith contributed Convex support (and Fortran de- bugging). Jonathan Stone contributed Pyramid support. Michael Tiemann contributed SPARC support. Tim Tucker contributed support for the Gould NP1 and Gould Powern- ode. Pace Willison contributed Intel 386 support. Jay Vosburgh contributed Symmetry support. Marko Mlinar contributed OpenRISC 1000 support. Andreas Schwab contributed M68K gnu/Linux support. Rich Schaefer and Peter Schauer helped with support of SunOS shared libraries. Jay Fenlason and Roland McGrath ensured that gdb and GAS agree about several machine instruction sets. Patrick Duval, Ted Goldstein, Vikram Koka and Glenn Engel helped develop remote debugging. Intel Corporation, Wind River Systems, AMD, and ARM contributed remote debugging modules for the i960, VxWorks, A29K UDI, and RDI targets, respectively. Brian Fox is the author of the readline libraries providing command-line editing and command history. Andrew Beers of SUNY Buffalo wrote the language-switching code, the Modula-2 sup- port, and contributed the Languages chapter of this manual. Fred Fish wrote most of the support for Unix System Vr4. He also enhanced the command-completion support to cover C++ overloaded symbols. Hitachi America (now Renesas America), Ltd. H8/500, and Super-H processors. sponsored the support for H8/300, NEC sponsored the support for the v850, Vr4xxx, and Vr5xxx processors. Mitsubishi (now Renesas) sponsored the support for D10V, D30V, and M32R/D proces- sors. Toshiba sponsored the support for the TX39 Mips processor. Matsushita sponsored the support for the MN10200 and MN10300 processors. Fujitsu sponsored the support for SPARClite and FR30 processors. Kung Hsu, Jeff Law, and Rick Sladkey added support for hardware watchpoints. Michael Snyder added support for tracepoints. Stu Grossman wrote gdbserver. Jim Kingdon, Peter Schauer, Ian Taylor, and Stu Grossman made nearly innumerable bug fixes and cleanups throughout gdb. The following people at the Hewlett-Packard Company contributed support for the PA- RISC 2.0 architecture, HP-UX 10.20, 10.30, and 11.0 (narrow mode), HP’s implementation of kernel threads, HP’s aC++ compiler, and the Text User Interface (nee Terminal User Interface): Ben Krepp, Richard Title, John Bishop, Susan Macchia, Kathy Mann, Satish Pai, India Paul, Steve Rehrauer, and Elena Zannoni. Kim Haase provided HP-specific information in this manual. DJ Delorie ported gdb to MS-DOS, for the DJGPP project. Robert Hoehne made significant contributions to the DJGPP port. Cygnus Solutions has sponsored gdb maintenance and much of its development since 1991. Cygnus engineers who have worked on gdb fulltime include Mark Alexander, Jim 5 Blandy, Per Bothner, Kevin Buettner, Edith Epstein, Chris Faylor, Fred Fish, Martin Hunt, Jim Ingham, John Gilmore, Stu Grossman, Kung Hsu, Jim Kingdon, John Metzler, Fernando Nasser, Geoffrey Noer, Dawn Perchik, Rich Pixley, Zdenek Radouch, Keith Seitz, Stan Shebs, David Taylor, and Elena Zannoni. In addition, Dave Brolley, Ian Carmichael, Steve Chamberlain, Nick Clifton, JT Conklin, Stan Cox, DJ Delorie, Ulrich Drepper, Frank Eigler, Doug Evans, Sean Fagan, David Henkel-Wallace, Richard Henderson, Jeff Holcomb, Jeff Law, Jim Lemke, Tom Lord, Bob Manson, Michael Meissner, Jason Merrill, Catherine Moore, Drew Moseley, Ken Raeburn, Gavin Romig-Koch, Rob Savoye, Jamie Smith, Mike Stump, Ian Taylor, Angela Thomas, Michael Tiemann, Tom Tromey, Ron Unrau, Jim Wilson, and David Zuhn have made contributions both large and small. Andrew Cagney, Fernando Nasser, and Elena Zannoni, while working for Cygnus Solu- tions, implemented the original gdb/mi interface. Jim Blandy added support for preprocessor macros, while working for Red Hat. Andrew Cagney designed gdb’s architecture vector. Many people including Andrew Cagney, Stephane Carrez, Randolph Chung, Nick Duffek, Richard Henderson, Mark Ket- tenis, Grace Sainsbury, Kei Sakamoto, Yoshinori Sato, Michael Snyder, Andreas Schwab, Jason Thorpe, Corinna Vinschen, Ulrich Weigand, and Elena Zannoni, helped with the migration of old architectures to this new framework. Andrew Cagney completely re-designed and re-implemented gdb’s unwinder framework, this consisting of a fresh new design featuring frame IDs, independent frame sniffers, and the sentinel frame. Mark Kettenis implemented the dwarf 2 unwinder, Jeff Johnston the libunwind unwinder, and Andrew Cagney the dummy, sentinel, tramp, and trad unwinders. The architecture-specific changes, each involving a complete rewrite of the architecture’s frame code, were carried out by Jim Blandy, Joel Brobecker, Kevin Buettner, Andrew Cagney, Stephane Carrez, Randolph Chung, Orjan Friberg, Richard Henderson, Daniel Jacobowitz, Jeff Johnston, Mark Kettenis, Theodore A. Roth, Kei Sakamoto, Yoshinori Sato, Michael Snyder, Corinna Vinschen, and Ulrich Weigand. Christian Zankel, Ross Morley, Bob Wilson, and Maxim Grigoriev from Tensilica, Inc. contributed support for Xtensa processors. Others who have worked on the Xtensa port of gdb in the past include Steve Tjiang, John Newlin, and Scott Foehner.

58,454

社区成员

发帖
与我相关
我的任务
社区描述
Java Eclipse
社区管理员
  • Eclipse
加入社区
  • 近7日
  • 近30日
  • 至今
社区公告
暂无公告

试试用AI创作助手写篇文章吧