3,491
社区成员
发帖
与我相关
我的任务
分享怎么修改“安装检测到系统的主 IP 地址是 DHCP 分配的地址。”这个问题？
我在安装oracle 10.2.0.1的时候，出现了如下一个警告：
检查完成。此次检查的总体结果为: 失败 <<<<
问题: 安装检测到系统的主 IP 地址是 DHCP 分配的地址。
建议案: Oracle 支持在具有 DHCP 分配的 IP 地址的系统上进行安装。但在安装之前, 必须将
Microsoft LoopBack Adapter 配置为系统的主网络适配器。有关在配置有 DHCP 的系统上安装软件的
详细信息, 请参阅 Installation Guide。
我看了半天也不知道是什么意思，
更不知道怎么去修改，
哪位告诉我一下啊？
检查完成。此次检查的总体结果为: 失败 <<<<
问题: 安装检测到系统的主 IP 地址是 DHCP 分配的地址。
建议案: Oracle 支持在具有 DHCP 分配的 IP 地址的系统上进行安装。但在安装之前, 必须将
Microsoft LoopBack Adapter 配置为系统的主网络适配器。有关在配置有 DHCP 的系统上安装软件的
详细信息, 请参阅 Installation Guide。
我看了半天也不知道是什么意思，
更不知道怎么去修改，
哪位告诉我一下啊？
...全文
请发表友善的回复…
发表回复
xiafan 2006-03-28
- 打赏
- 举报
DHCP 是指动态 IP 地址分配.
就是你的 IP 地址不是固定的,而是由服务器随机分配一个 IP 地址给你.如果不是服务器端有要求,你可以直接在你的网络属性里填上一个 IP 地址.
就是你的 IP 地址不是固定的,而是由服务器随机分配一个 IP 地址给你.如果不是服务器端有要求,你可以直接在你的网络属性里填上一个 IP 地址.
bersagliere005 2006-03-27
- 打赏
- 举报
学习
匆匆岁月 2006-03-26
- 打赏
- 举报
“DHCP 分配的地址”这是啥意思啊？
匆匆岁月 2006-03-26
- 打赏
- 举报
我现在的ＩＰ地址是172.17.xxx.xxx开头的，这个可以吧应该
匆匆岁月 2006-03-26
- 打赏
- 举报
现在用的机器都是有固定ＩＰ的，并且现在配置的时候都是用机器名来配置的。
humanity 2006-03-26
- 打赏
- 举报
我想只有 通一台机器的 Oracle 配置都用 机器名 或是 127.0.0.1 来配置就不会出问题。
怕只怕没有一个固定的 IP , 那些涉及到 TCP/IP 的配置就只能用 机器名/域名/127.0.0.1/localhost 这样的代替了。 如果用机器名就要保证及其改名配置也要手工改。
怕只怕没有一个固定的 IP , 那些涉及到 TCP/IP 的配置就只能用 机器名/域名/127.0.0.1/localhost 这样的代替了。 如果用机器名就要保证及其改名配置也要手工改。
追寻梦中人 2006-03-25
- 打赏
- 举报
我也没理会它直接继续安装了，到现在没发现什么异常，
不过不知道以后会不会有影响。。。
关注。。。
不过不知道以后会不会有影响。。。
关注。。。
david_xu322 2006-03-24
- 打赏
- 举报
我也遇到同样的问题，不理会它继续可以安装，没发现什么异常，不知道会不会有什么影响，
关注！
关注！
开发者开聊 2006-03-23
- 打赏
- 举报
http://support.microsoft.com/default.aspx?scid=kb;en-us;839013
How to install the Microsoft Loopback adapter in Windows XP
View products that this article applies to.
Article ID : 839013
Last Review : April 22, 2004
Revision : 1.0
For a Microsoft Windows 2000 version of this article, see 236869 (http://support.microsoft.com/kb/236869/).
On This Page
SUMMARY
Manual installation
Unattended installation
MORE INFORMATION
APPLIES TO
SUMMARY
The Microsoft Loopback adapter is a testing tool for a virtual network environment where network access is not available. Also, you must use the Loopback adapter if there are conflicts with a network adapter or with a network adapter driver. You can bind network clients, protocols, and other network configuration items to the Loopback adapter, and you can install the network adapter driver or network adapter later while retaining the network configuration information. You can also install the Loopback adapter during the unattended installation process.
Back to the top
Manual installation
To manually install the Microsoft Loopback adapter in Windows XP, follow these steps: 1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.
After the adapter is installed successfully, you can manually configure its options, as with any other adapter. If the TCP/IP properties are configured to use DHCP, the adapter will eventually use an autonet address (169.254.x.x/16) because the adapter is not actually connected to any physical media.
Note By default, TCP/IP properties are configured to use DHCP.
Back to the top
Unattended installation
To install the Microsoft Loopback adapter, use the following sample Unattend.txt file as a model for your Unattend.txt file: [NetAdapters]
Adapter01=Params.Adapter01
[Params.Adapter01]
InfID="*msloop"
; Microsoft Loopback Adapter
ConnectionName ="MS Loopback Adapter"
[NetProtocols]
MS_TCPIP=Params.MS_TCPIP
; TCP/IP parameters
; Use parameter values specific to your network
[Params.MS_TCPIP]
AdapterSections=params.TCPIP.Adapter01
DNS=yes
DNSSuffixSearchOrder=mycorp.com
EnableLMHosts=No
; Adapter Specific TCP/IP parameters
; Use parameter values specific to your network
[params.TCPIP.Adapter01]
SpecificTo=Adapter01
DNSDomain=mycorp.com
DNSServerSearchOrder=192.168.5.251
WINS=no
DHCP=no
IPAddress=192.168.5.10
SubnetMask=255.255.255.0
DefaultGateway=192.168.5.254
How to install the Microsoft Loopback adapter in Windows XP
View products that this article applies to.
Article ID : 839013
Last Review : April 22, 2004
Revision : 1.0
For a Microsoft Windows 2000 version of this article, see 236869 (http://support.microsoft.com/kb/236869/).
On This Page
SUMMARY
Manual installation
Unattended installation
MORE INFORMATION
APPLIES TO
SUMMARY
The Microsoft Loopback adapter is a testing tool for a virtual network environment where network access is not available. Also, you must use the Loopback adapter if there are conflicts with a network adapter or with a network adapter driver. You can bind network clients, protocols, and other network configuration items to the Loopback adapter, and you can install the network adapter driver or network adapter later while retaining the network configuration information. You can also install the Loopback adapter during the unattended installation process.
Back to the top
Manual installation
To manually install the Microsoft Loopback adapter in Windows XP, follow these steps: 1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.
After the adapter is installed successfully, you can manually configure its options, as with any other adapter. If the TCP/IP properties are configured to use DHCP, the adapter will eventually use an autonet address (169.254.x.x/16) because the adapter is not actually connected to any physical media.
Note By default, TCP/IP properties are configured to use DHCP.
Back to the top
Unattended installation
To install the Microsoft Loopback adapter, use the following sample Unattend.txt file as a model for your Unattend.txt file: [NetAdapters]
Adapter01=Params.Adapter01
[Params.Adapter01]
InfID="*msloop"
; Microsoft Loopback Adapter
ConnectionName ="MS Loopback Adapter"
[NetProtocols]
MS_TCPIP=Params.MS_TCPIP
; TCP/IP parameters
; Use parameter values specific to your network
[Params.MS_TCPIP]
AdapterSections=params.TCPIP.Adapter01
DNS=yes
DNSSuffixSearchOrder=mycorp.com
EnableLMHosts=No
; Adapter Specific TCP/IP parameters
; Use parameter values specific to your network
[params.TCPIP.Adapter01]
SpecificTo=Adapter01
DNSDomain=mycorp.com
DNSServerSearchOrder=192.168.5.251
WINS=no
DHCP=no
IPAddress=192.168.5.10
SubnetMask=255.255.255.0
DefaultGateway=192.168.5.254
开发者开聊 2006-03-23
- 打赏
- 举报
http://support.microsoft.com/?kbid=236869
How To Install Microsoft Loopback Adapter in Windows 2000
View products that this article applies to.
Article ID : 236869
Last Review : July 14, 2004
Revision : 3.1
This article was previously published under Q236869
On This Page
SUMMARY
Manual Installation
Unattended Installation
APPLIES TO
SUMMARY
The Microsoft Loopback adapter is a tool for testing in a virtual network environment where access to a network is not feasible. Also, the Loopback adapter is essential if there are conflicts with a network adapter or a network adapter driver. Network clients, protocols, and so on, can be bound to the Loopback adapter, and the network adapter driver or network adapter can be installed at a later time while retaining the network configuration information. The Loopback adapter can also be installed during the unattended installation process.
Back to the top
Manual Installation
1. Click Start, point to Settings, click Control Panel, and then double-click Add/Remove Hardware.
2. Click Add/Troubleshoot a device, and then click Next.
3. Click Add a new device, and then click Next.
4. Click No, I want to select the hardware from a list, and then click Next.
5. Click Network adapters, and then click Next.
6. In the Manufacturers box, click Microsoft.
7. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
8. Click Finish.
After the adapter is installed successfully, you can configure its options manually, as with any other adapter. Note that if the TCP/IP properties are configured to use DHCP (the default), the adapter will eventually use an autonet address (169.254.x.x/16) because it is not actually connected to any physical media.
Back to the top
Unattended Installation
Modify the Unattend.txt file using the following example as a guide to install the Microsoft Loopback adapter: [NetAdapters]
Adapter01=Params.Adapter01
[Params.Adapter01]
InfID="*msloop" ; Microsoft Loopback Adapter
ConnectionName = "MS Loopback Adapter"
[NetProtocols]
MS_TCPIP=Params.MS_TCPIP
; TCP/IP parameters
; Use parameter values specific to your network
[Params.MS_TCPIP]
AdapterSections=params.TCPIP.Adapter01
DNS=yes
DNSSuffixSearchOrder=mycorp.com
EnableLMHosts=No
; Adapter Specific TCP/IP parameters
; Use parameter values specific to your network
[params.TCPIP.Adapter01]
SpecificTo=Adapter01
DNSDomain=mycorp.com
DNSServerSearchOrder=192.168.5.251
WINS=no
DHCP=no
IPAddress=192.168.5.10
SubnetMask=255.255.255.0
DefaultGateway=192.168.5.254
Back to the top
How To Install Microsoft Loopback Adapter in Windows 2000
View products that this article applies to.
Article ID : 236869
Last Review : July 14, 2004
Revision : 3.1
This article was previously published under Q236869
On This Page
SUMMARY
Manual Installation
Unattended Installation
APPLIES TO
SUMMARY
The Microsoft Loopback adapter is a tool for testing in a virtual network environment where access to a network is not feasible. Also, the Loopback adapter is essential if there are conflicts with a network adapter or a network adapter driver. Network clients, protocols, and so on, can be bound to the Loopback adapter, and the network adapter driver or network adapter can be installed at a later time while retaining the network configuration information. The Loopback adapter can also be installed during the unattended installation process.
Back to the top
Manual Installation
1. Click Start, point to Settings, click Control Panel, and then double-click Add/Remove Hardware.
2. Click Add/Troubleshoot a device, and then click Next.
3. Click Add a new device, and then click Next.
4. Click No, I want to select the hardware from a list, and then click Next.
5. Click Network adapters, and then click Next.
6. In the Manufacturers box, click Microsoft.
7. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
8. Click Finish.
After the adapter is installed successfully, you can configure its options manually, as with any other adapter. Note that if the TCP/IP properties are configured to use DHCP (the default), the adapter will eventually use an autonet address (169.254.x.x/16) because it is not actually connected to any physical media.
Back to the top
Unattended Installation
Modify the Unattend.txt file using the following example as a guide to install the Microsoft Loopback adapter: [NetAdapters]
Adapter01=Params.Adapter01
[Params.Adapter01]
InfID="*msloop" ; Microsoft Loopback Adapter
ConnectionName = "MS Loopback Adapter"
[NetProtocols]
MS_TCPIP=Params.MS_TCPIP
; TCP/IP parameters
; Use parameter values specific to your network
[Params.MS_TCPIP]
AdapterSections=params.TCPIP.Adapter01
DNS=yes
DNSSuffixSearchOrder=mycorp.com
EnableLMHosts=No
; Adapter Specific TCP/IP parameters
; Use parameter values specific to your network
[params.TCPIP.Adapter01]
SpecificTo=Adapter01
DNSDomain=mycorp.com
DNSServerSearchOrder=192.168.5.251
WINS=no
DHCP=no
IPAddress=192.168.5.10
SubnetMask=255.255.255.0
DefaultGateway=192.168.5.254
Back to the top
