华为AR18-20S 路由器PPPOE接入小区局域网上INTERNET,中如何配置? 请朋友给个具体配置清单吧.

[delphibs]

现有条件是:只有电信小区宽带网接入的PPPOE 帐号:bbs7612222 口令:12345678,没有公网地址和DNS服务器IP.

要求:
1.RA18-20S 的E2/0(WAN)端口通过PPPOE拨号接入小区宽带上INTERNET;
2.RA18-20S 的E1/1 (LAN0)端口下接华为S2403H交换机的LINK口,S2403H的E0- E15-E24的PC机由一台安装的DHCP的服务器动态分配给地址.
3.要求每台PC机能登陆服务器(域名为:LOCAL.COM)并且能工巧匠通过AR18-20S上INTERNET.

[delphibs]

本人第一次接触路由器配置,请诸位援手呀!

[delphibs]

谁来帮助我??

[delphibs]

超级终端登陆.system_view 就可以改路由的.问题是应怎样才能成功配置pppoe 拨号上internet?

[LivermoreXx]

试试 telnet 进路由 按键盘上的break键看能不能改密码？或者试试密码看是不是，huawei或者cisco。如果能改路由就OK了

[delphibs]

?????

[delphibs]

#
sysname Quidway
#
dialer-rule 1 ip permit
#
radius scheme system
#
domain system
#
local-user name
password cipher 123456
service-type telnet terminal
level 3
#
acl number 2000
rule 0 permit source 192.168.1.0 0.0.0.255
rule 1 deny
#
interface Dialer1
link-protocol ppp
ppp chap user bbs7712824001
ppp chap password simple 123456
ppp pap local-user bbs7712824001 password simple 123456
tcp mss 1024
ip address ppp-negotiate
dialer user mypppoe
dialer-group 1
dialer bundle 1
nat outbound 2000
#
interface Ethernet1/0
ip address 192.168.1.1 255.255.255.0
#
interface Ethernet1/1
#
interface Ethernet1/2
#
interface Ethernet1/3
#
interface Ethernet1/4
#
interface Ethernet2/0
speed 10
duplex full
pppoe-client dial-bundle-number 1
ip address dhcp-alloc
#
interface NULL0

#
ip route-static 0.0.0.0 0.0.0.0 Dialer 1 preference 60
#
user-interface con 0
user-interface vty 0 4
authentication-mode scheme
#
return