如何获得硬盘序列号？

[hazimao]

同标题。

[goodloop]

procedure TForm1.Button1Click(Sender: TObject);
var SerialNum : pdword; a, b : dword; Buffer : array [0..255] of char;
begin
if GetVolumeInformation('c:\', Buffer, SizeOf(Buffer), SerialNum, a, b, nil, 0) then Label1.Caption := IntToStr(SerialNum^);

end;

[RamjetZhang]

忘了，不过dir就行，记得msdn里有篇如何改序列号的（曾经想过要改实验室90台机的vol c，结果ghost了事），用汇编的

[linx88]

错了吧？我在两台机子上试，结果一样

[swordsmith]

不用那么麻烦吧，这样绝对没问题（试过100块IBM T32的硬盘）：

function GetIDESN: Cardinal;
Var
cSN:Cardinal;
MaxNameLength:Cardinal;
FSFlag:Cardinal;
begin
GetVolumeInformation('C:\',nil,0,@cSN,MaxNameLength,FSFlag,nil,0);
Result:=cSN;
end;

上面 goodloop(小志)的程序好像指针（SerialNum : pdword）没有分配空间，不知道会不会出问题。

[TechnoFantasy]

swordsmith(贱客)
获得的不是序列号，而是卷标

[TechnoFantasy]

用VC编写的DLL，可以获得硬盘的型号、序列号以及计算机 ID，带Delphi的源程序，在Win2K下通过，但是没有在Win9X下试过，感兴趣的朋友可以在Win9X 下试一下，或者编写一个VB的范例。
函数以及定义：
function ReadPhysicalDrive(driveID:integer;buffer:Pointer;bufLen:integer):integer; stdcall; external 'DiskID.dll' name 'ReadPhysicalDriveInNT';
获得WinNT下的硬盘型号以及序列号。参数driveID为硬盘的位置，IDE1上的主盘为0，类推到IDE2上的从盘的driveID为3。
function ReadPhysicalDrive9X(driveID:integer;buffer:Pointer;bufLen:integer):integer; stdcall; external 'DiskID.dll' name 'ReadDrivePortsInWin9X';
获得Win9X下的硬盘型号以及序列号。参数同上
function getHardDriveComputerID:int64; stdcall; external 'DiskID.dll' name 'getHardDriveComputerID';
获得计算机的ID

http://www.applevb.com/lib/diskio.rar

[realist]

你试试这个吧！

取Ide硬盘序列号函数
作者： 评价： 内容说明：
来源：

--------------------------------------------------------------------------------

function GetIdeDiskSerialNumber : String;
type
TSrbIoControl = packed record
HeaderLength : ULONG;
Signature : Array[0..7] of Char;
Timeout : ULONG;
ControlCode : ULONG;
ReturnCode : ULONG;
Length : ULONG;
end;
SRB_IO_CONTROL = TSrbIoControl;
PSrbIoControl = ^TSrbIoControl;

TIDERegs = packed record
bFeaturesReg : Byte; // Used for specifying SMART "commands".
bSectorCountReg : Byte; // IDE sector count register
bSectorNumberReg : Byte; // IDE sector number register
bCylLowReg : Byte; // IDE low order cylinder value
bCylHighReg : Byte; // IDE high order cylinder value
bDriveHeadReg : Byte; // IDE drive/head register
bCommandReg : Byte; // Actual IDE command.
bReserved : Byte; // reserved. Must be zero.
end;
IDEREGS = TIDERegs;
PIDERegs = ^TIDERegs;

TSendCmdInParams = packed record
cBufferSize : DWORD;
irDriveRegs : TIDERegs;
bDriveNumber : Byte;
bReserved : Array[0..2] of Byte;
dwReserved : Array[0..3] of DWORD;
bBuffer : Array[0..0] of Byte;
end;
SENDCMDINPARAMS = TSendCmdInParams;
PSendCmdInParams = ^TSendCmdInParams;

TIdSector = packed record
wGenConfig : Word;
wNumCyls : Word;
wReserved : Word;
wNumHeads : Word;
wBytesPerTrack : Word;
wBytesPerSector : Word;
wSectorsPerTrack : Word;
wVendorUnique : Array[0..2] of Word;
sSerialNumber : Array[0..19] of Char;
wBufferType : Word;
wBufferSize : Word;
wECCSize : Word;
sFirmwareRev : Array[0..7] of Char;
sModelNumber : Array[0..39] of Char;
wMoreVendorUnique : Word;
wDoubleWordIO : Word;
wCapabilities : Word;
wReserved1 : Word;
wPIOTiming : Word;
wDMATiming : Word;
wBS : Word;
wNumCurrentCyls : Word;
wNumCurrentHeads : Word;
wNumCurrentSectorsPerTrack : Word;
ulCurrentSectorCapacity : ULONG;
wMultSectorStuff : Word;
ulTotalAddressableSectors : ULONG;
wSingleWordDMA : Word;
wMultiWordDMA : Word;
bReserved : Array[0..127] of Byte;
end;
PIdSector = ^TIdSector;

const
IDE_ID_FUNCTION = $EC;
IDENTIFY_BUFFER_SIZE = 512;
DFP_RECEIVE_DRIVE_DATA = $0007c088;
IOCTL_SCSI_MINIPORT = $0004d008;
IOCTL_SCSI_MINIPORT_IDENTIFY = $001b0501;
DataSize = sizeof(TSendCmdInParams)-1+IDENTIFY_BUFFER_SIZE;
BufferSize = SizeOf(SRB_IO_CONTROL)+DataSize;
W9xBufferSize = IDENTIFY_BUFFER_SIZE+16;
var
hDevice : THandle;
cbBytesReturned : DWORD;
pInData : PSendCmdInParams;
pOutData : Pointer; // PSendCmdOutParams
Buffer : Array[0..BufferSize-1] of Byte;
srbControl : TSrbIoControl absolute Buffer;

procedure ChangeByteOrder( var Data; Size : Integer );
var ptr : PChar;
i : Integer;
c : Char;
begin
ptr := @Data;
for i := 0 to (Size shr 1)-1 do
begin
c := ptr^;
ptr^ := (ptr+1)^;
(ptr+1)^ := c;
Inc(ptr,2);
end;
end;

begin
Result := '';
FillChar(Buffer,BufferSize,#0);
if Win32Platform=VER_PLATFORM_WIN32_NT then
begin // Windows NT, Windows 2000
// Get SCSI port handle
hDevice := CreateFile( '\\.\Scsi0:',
GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE,
nil, OPEN_EXISTING, 0, 0 );
if hDevice=INVALID_HANDLE_VALUE then Exit;
try
srbControl.HeaderLength := SizeOf(SRB_IO_CONTROL);
System.Move('SCSIDISK',srbControl.Signature,8);
srbControl.Timeout := 2;
srbControl.Length := DataSize;
srbControl.ControlCode := IOCTL_SCSI_MINIPORT_IDENTIFY;
pInData := PSendCmdInParams(PChar(@Buffer)
+SizeOf(SRB_IO_CONTROL));
pOutData := pInData;
with pInData^ do
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do
begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl( hDevice, IOCTL_SCSI_MINIPORT,
@Buffer, BufferSize, @Buffer, BufferSize,
cbBytesReturned, nil ) then Exit;
finally
CloseHandle(hDevice);
end;
end
else
begin // Windows 95 OSR2, Windows 98
hDevice := CreateFile( '\\.\SMARTVSD', 0, 0, nil,
CREATE_NEW, 0, 0 );
if hDevice=INVALID_HANDLE_VALUE then Exit;
try
pInData := PSendCmdInParams(@Buffer);
pOutData := @pInData^.bBuffer;
with pInData^ do
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do
begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl( hDevice, DFP_RECEIVE_DRIVE_DATA,
pInData, SizeOf(TSendCmdInParams)-1, pOutData,
W9xBufferSize, cbBytesReturned, nil ) then Exit;
finally
CloseHandle(hDevice);
end;
end;
with PIdSector(PChar(pOutData)+16)^ do
begin
ChangeByteOrder(sSerialNumber,SizeOf(sSerialNumber));
SetString(Result,sSerialNumber,SizeOf(sSerialNumber));
end;
end;

在win2000下，d5 d6都通过　

[Mercedes]

用取序列号作为程序加密并不是完全可行的。有的IDE硬盘并不具有序列号，而SCSI硬盘更是没有序列号一说，我试过三块SCSI硬盘，都不能取得序列号，不过，如果软件是装在某一台固定的机器上的话，用这个方法还是很不错的。

[quark]

//==============================================================================
//获得硬盘序列号****************************************************************
//==============================================================================
function GetHardDiskSerial(Drive: string): string;
var VolumeSerialNumber: DWORD;
MaximumComponentLength: DWORD;
FileSystemFlags: DWORD;
begin
if Drive[Length(Drive)]=':' then Drive := Drive + '\';
GetVolumeInformation(PChar(Drive), nil, 0, @VolumeSerialNumber, MaximumComponentLength, FileSystemFlags, nil, 0);
Result := IntToHex(HiWord(VolumeSerialNumber), 4) + '-' + IntToHex(LoWord(VolumeSerialNumber), 4);
end;

[qiqi97]

function GetIdeSerialNumber: pchar;
const IDENTIFY_BUFFER_SIZE = 512;
type
TIDERegs = packed record
bFeaturesReg: BYTE; // Used for specifying SMART "commands".
bSectorCountReg: BYTE; // IDE sector count register
bSectorNumberReg: BYTE; // IDE sector number register
bCylLowReg: BYTE; // IDE low order cylinder value
bCylHighReg: BYTE; // IDE high order cylinder value
bDriveHeadReg: BYTE; // IDE drive/head register
bCommandReg: BYTE; // Actual IDE command.
bReserved: BYTE; // reserved for future use. Must be zero.
end;
TSendCmdInParams = packed record
// Buffer size in bytes
cBufferSize: DWORD;
// Structure with drive register values.
irDriveRegs: TIDERegs;
// Physical drive number to send command to (0,1,2,3).
bDriveNumber: BYTE;
bReserved: array[0..2] of Byte;
dwReserved: array[0..3] of DWORD;
bBuffer: array[0..0] of Byte; // Input buffer.
end;
TIdSector = packed record
wGenConfig: Word;
wNumCyls: Word;
wReserved: Word;
wNumHeads: Word;
wBytesPerTrack: Word;
wBytesPerSector: Word;
wSectorsPerTrack: Word;
wVendorUnique: array[0..2] of Word;
sSerialNumber: array[0..19] of CHAR;
wBufferType: Word;
wBufferSize: Word;
wECCSize: Word;
sFirmwareRev: array[0..7] of Char;
sModelNumber: array[0..39] of Char;
wMoreVendorUnique: Word;
wDoubleWordIO: Word;
wCapabilities: Word;
wReserved1: Word;
wPIOTiming: Word;
wDMATiming: Word;
wBS: Word;
wNumCurrentCyls: Word;
wNumCurrentHeads: Word;
wNumCurrentSectorsPerTrack: Word;
ulCurrentSectorCapacity: DWORD;
wMultSectorStuff: Word;
ulTotalAddressableSectors: DWORD;
wSingleWordDMA: Word;
wMultiWordDMA: Word;
bReserved: array[0..127] of BYTE;
end;
PIdSector = ^TIdSector;
TDriverStatus = packed record
// 驱动器返回的错误代码，无错则返回0
bDriverError: Byte;
// IDE出错寄存器的内容，只有当bDriverError 为 SMART_IDE_ERROR 时有效
bIDEStatus: Byte;
bReserved: array[0..1] of Byte;
dwReserved: array[0..1] of DWORD;
end;
TSendCmdOutParams = packed record
// bBuffer的大小
cBufferSize: DWORD;
// 驱动器状态
DriverStatus: TDriverStatus;
// 用于保存从驱动器读出的数据的缓冲区，实际长度由cBufferSize决定
bBuffer: array[0..0] of BYTE;
end;
var
hDevice: Thandle;
cbBytesReturned: DWORD;
SCIP: TSendCmdInParams;
aIdOutCmd: array[0..(SizeOf(TSendCmdOutParams) + IDENTIFY_BUFFER_SIZE - 1) - 1] of Byte;
IdOutCmd: TSendCmdOutParams absolute aIdOutCmd;
procedure ChangeByteOrder(var Data; Size: Integer);
var
ptr: Pchar;
i: Integer;
c: Char;
begin
ptr := @Data;
for I := 0 to (Size shr 1) - 1 do begin
c := ptr^;
ptr^ := (ptr + 1)^;
(ptr + 1)^ := c;
Inc(ptr, 2);
end;
end;
begin
Result := ''; // 如果出错则返回空串
if SysUtils.Win32Platform = VER_PLATFORM_WIN32_NT then
begin // Windows NT, Windows 2000
// 提示! 改变名称可适用于其它驱动器，如第二个驱动器： '\\.\PhysicalDrive1\'
hDevice := CreateFile('\\.\PhysicalDrive0', GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE, nil, OPEN_EXISTING, 0, 0);
end
else // Version Windows 95 OSR2, Windows 98
hDevice := CreateFile('\\.\SMARTVSD', 0, 0, nil, CREATE_NEW, 0, 0);
if hDevice = INVALID_HANDLE_VALUE then Exit;
try
FillChar(SCIP, SizeOf(TSendCmdInParams) - 1, #0);
FillChar(aIdOutCmd, SizeOf(aIdOutCmd), #0);
cbBytesReturned := 0;
// Set up data structures for IDENTIFY command.
with SCIP do begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
// bDriveNumber := 0;
with irDriveRegs do begin
bSectorCountReg := 1;
bSectorNumberReg := 1;
// if Win32Platform=VER_PLATFORM_WIN32_NT then bDriveHeadReg := $A0
// else bDriveHeadReg := $A0 or ((bDriveNum and 1) shl 4);
bDriveHeadReg := $A0;
bCommandReg := $EC;
end;
end;
if not DeviceIoControl(hDevice, $0007C088, @SCIP, SizeOf(TSendCmdInParams) - 1,
@aIdOutCmd, SizeOf(aIdOutCmd), cbBytesReturned, nil) then Exit;
finally
CloseHandle(hDevice);
end;
with PIdSector(@IdOutCmd.bBuffer)^ do begin
ChangeByteOrder(sSerialNumber, SizeOf(sSerialNumber));
(Pchar(@sSerialNumber) + SizeOf(sSerialNumber))^ := #0;
Result := Pchar(@sSerialNumber);
end;
end;


这是取硬盘ID的，我的2K Server下可以工作

[roshui]

要获取win98系统上的硬盘序列号，上面的方法都不行啊？
有谁有解决之道。

[quark]

//==============================================================================
//获得硬盘序列号****************************************************************
//==============================================================================
function GetHardDiskSerial(Drive: string): string;
var VolumeSerialNumber: DWORD;
MaximumComponentLength: DWORD;
FileSystemFlags: DWORD;
begin
if Drive[Length(Drive)]=':' then Drive := Drive + '\';
GetVolumeInformation(PChar(Drive), nil, 0, @VolumeSerialNumber, MaximumComponentLength, FileSystemFlags, nil, 0);
Result := IntToHex(HiWord(VolumeSerialNumber), 4) + '-' + IntToHex(LoWord(VolumeSerialNumber), 4);
end;

[roshui]

??

[ly_liuyang]

的却，上面的方法，在Win98下不行的，2000／XP都可以
// Version Windows 95 OSR2, Windows 98
hDevice := CreateFile('\\.\SMARTVSD', 0, 0, nil, CREATE_NEW, 0, 0); 对于Win98，是无效句柄！Win98SE没有对象\\.\SMARTVSD的
。。。。
Up

[diruser]

如像realist(现实) 提供的方法可以，但不知在win95,winMe中是否可用？

[kuchong]

98下不能取道硬盘序列号
我也很想知道这个问题
有知道的和我联系
[e-mail]

[fsunrise]

#include <windows.h>
#include <stdio.h>

WORD pw[256];

static DWORD idt, int_idt;
static DWORD Base;
static WORD Entry;

#pragma warning (disable:4035)
static int inp(WORD rdx)
{
_asm xor eax, eax
_asm mov dx, rdx
_asm in al, dx
}

static WORD inpw(WORD rdx)
{
_asm xor eax, eax
_asm mov dx, rdx
_asm in ax, dx
}

static void outp(WORD rdx, int ral)
{
_asm mov dx, rdx
_asm mov eax, ral
_asm out dx, al
}

static int WaitIde()
{
int al;

while ((al=inp(0x1F7))>=0x80) ;
return al;
}

static void ReadIDE()
{
int al;
int i;

WaitIde();
outp(0x1F6,0xA0);
al = WaitIde();
if ((al&0x50)!=0x50) return;

outp(0x1F6,0xA0);
outp(0x1F7,0xEC);
al = WaitIde();
if ((al&0x58)!=0x58) return;

for (i=0;i<256;i++) {
pw[i] = inpw(0x1F0);
}
}

static void __declspec( naked ) NowInRing0()
{
_asm {
push ebp
mov ebp,esp

call ReadIDE

cli
mov ebx, int_idt
mov ax, Entry
mov word ptr [ebx-4], ax
mov eax, Base
shr eax, 16
mov [ebx+2], ax
sti
leave
iretd
}
}

void GetIDEInfo()
{
DWORD dwExcept;

dwExcept = (DWORD)NowInRing0;

_asm {
mov eax, fs:[0]
push eax
sidt [esp-02h]
pop ebx
mov idt, ebx
add ebx, 0x1C
mov int_idt, ebx

mov eax, [ebx]
mov [Base], eax
mov ax, [ebx-4]
mov [Entry], ax

cli
mov esi, dwExcept
push esi
mov [ebx-4], si
shr esi, 16
mov [ebx+2], si
pop esi
sti

int 3
}
}

main()
{
char s[80];
register i,j;

GetIDEInfo();

for (i=0,j=0;i<10;i++) {
s[j++]=pw[10+i]>>8;
s[j++]=pw[10+i]&0xFF;
}
s[j] = 0;

printf("Serial=%s\n", s);

return 0;
}



Win9X的代码有问题，详情如下。感谢这位大哥的指点。

NowCan: 你的FOR 9x的代码有问题，读从盘要么死机、要么读不出，应该象BCB_FAN的代码那样根据是主盘还是从盘调整参数。

你的有问题的代码如下
static void ReadIDE()
{
int al;
int i;

WaitIde();
outp(0x1F6,0xA0); <=========主盘是0xA0，从盘是0xB0，
al = WaitIde();
if ((al&0x50)!=0x50) return;

outp(0x1F6,0xA0); <========= 但这里却不进行区分，直接使用0xA0
outp(0x1F7,0xEC); <========= 这个也有可能有问题
对于ATA设备，是0xEC，
但对于ATAPI设备，则为0xA1
al = WaitIde();
if ((al&0x58)!=0x58) return;

for (i=0;i<256;i++) {
pw[i] = inpw(0x1F0);
}

　

[fsunrise]

上面的程序是从老侃那里转来的！我也想搞清这个问题！