ce 6 eboot 下载NK 启动后挂了

sphink10 2009-04-06 01:16:29

平台2440 使用NBOOT+EBOOT 下载NK
DNW信息如下：

Enter your selection: d
INFO: Probe: DM9000 is detected.
DM9000: MAC Address: 0:11:22:33:44:55
System ready!
Preparing for download...
INFO: *** Device Name 'SMDK244017493' ***
INFO: Using static IP address 1218113.
INFO: Using subnet mask 2525250.
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Packet has the following data:
boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.1.173 Port 03D4 Dest IP 192.168.1.175 Port 085C
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN

Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x80200000 Length=0xabbcac
-----------------------------------------------------
RAM image
TFTP: Desktop losing ACK, block number = 12167, Ack again
TFTP: Desktop losing ACK, block number = 15635, Ack again
rom_offset=0x0.
TFTP: Desktop losing ACK, block number = 21614, Ack again
ImageStart = 0x80200000, ImageLength = 0xABBCAC, LaunchAddr = 0x8022A73C

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x80200000 Length=0xABBCAC Name="" Target=RAM
ROMHDR at Address 80200044h
waitforconnect
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
INFO: OEMLaunch: Jumping to Physical Address 0x3022A73Ch (Virtual Address 0x8022A73Ch)...

CWindows CE Kernel for ARM (Thumb Enabled) Built on Sep 30 2007 at 22:37:06
DCache: 8 sets, 64 ways, 32 line size, 16384 size
ICache: 8 sets, 64 ways, 32 line size, 16384 size
Exception 'Prefetch Abort' (3): Thread-Id=005c0002(pth=83f8d264), Proc-Id=00400002(pprc=82008308) 'NK.EXE', VM-active=00400002(pprc=82008308) 'NK.EXE'
PC=00000000(???+0x00000000) RA=c0572990(smflash.dll+0x00002990) SP=d00bec54, BVA=00000000
Exception 'Raised Exception' (-1): Thread-Id=005c0002(pth=83f8d264), Proc-Id=00400002(pprc=82008308) 'NK.EXE', VM-active=00400002(pprc=82008308) 'NK.EXE'
PC=c0035940(k.coredll.dll+0x00015940) RA=8023849c(kernel.dll+0x0000649c) SP=d00be4d0, BVA=ffffffff
PWR: Process Attach
>PWR_Init(D039ECF0)
HW_Init : HW_InitRegisters
HW_Init : CreateEvent
HW_Init : IOCTL_HAL_REQUEST_SYSINTR
INFO: PwrButton: Mapped Irq 0x0 to SysIntr 0x13.
HW_Init : CreateThread
HW_Init : CeSetThreadPriority
HW_Init : Done
<PWR_Init:0xd004df60
>PWR_Open(0xd004df60, 0x0, 0x3)
PCF: HW_Open
<PWR_Open:1
>PWR_IOControl(0x321000, 0x0, 0, 0xd004dce8)
<PWR_IOControl:1
>PWR_Open(0xd004df60, 0x0, 0x3)
PCF: HW_Open
<PWR_Open:2
PWR_Close(0xd004df60)
PCF: HW_Close
就卡这不动了对NK信息不是很了解麻烦大虾们帮忙看看问题出哪了

...全文

575 13 打赏收藏转发到动态举报

写回复

用AI写文章

13 条回复

切换为时间正序

请发表友善的回复…

发表回复

sphink10 2009-04-06

打赏
举报

FSREG: Taking down boot registry. Any open keys will be invalid.
FILESYS: Registry in place.
FSREG: Unable to read value "RegistryFlags" under HKEY_LOCAL_MACHINE\init\BootVars
Failure on copy of \Windows\camtest.exe
Failure on copy of \Windows\regedit.exe
FSVOL: Using system database volume "\Documents and Settings\default.vol"
BuildPath: Documents and Settings
FSVOL: Creating new volume (size=28672 bytes)
FSVOL: Initializing volume heap
FSREG: Unable to read value "RequireCertMod" under HKEY_LOCAL_MACHINE\init\BootVars
FSDMGR!PNPThread: Using PNPUnloadDelay of 4096
FSDMGR!PNPThread: PNPThread starting!
FSREG: Unable to read value "NoDefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars
FSREG: Logging in default user.
FSREG: Unable to read value "DefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars
SetCurrentUser: Logging out (nobody), logging in default
BuildPath: Documents and Settings
BuildPath: Documents and Settings\default
FSREG: Mounting ROM portion of user hive
FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
Mounting user hive from \Documents and Settings\default\user.hv
FSREG: Mounting clean user hive
FSVOL: Creating new volume (size=28672 bytes)
FSVOL: Initializing volume heap
FSREG: Unable to read value "RegistryFlags" under HKEY_LOCAL_MACHINE\init\BootVars
FSDMGR!STOREMGR_StartBootPhase BootPhase=2 (PrevBootPhase=1)
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=2, LoadFlags=1
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=2, LoadFlags=2

Initializing Database
DB:Validation: Name already exists DB_notify_events
DB:CeCreateDatabase failed
Filesystem initialized!
FILESYS: Waiting for kernel to be ready to launch apps
InitMUI: Langs=409 0 0 0 0 0
FS: Creating signal event SYSTEM/DevMgrApiSetReady
FILESYS: Launching apps
FILESYS: Launching device.dll
OSAXST1: >>> Loading Module 'device.dll' (0x83F2A450) at address 0xC0230000-0xC0235000 in Process 'NK.EXE' (0x82008AA0)
OSAXST1: >>> Loading Module 'devmgr.dll' (0x83F2A5C8) at address 0xC0240000-0xC0265000 in Process 'NK.EXE' (0x82008AA0)
OSAXST1: >>> Loading Module 'k.ceddk.dll' (0x83F2A700) at address 0xC02F0000-0xC02FE000 in Process 'NK.EXE' (0x82008AA0)
*** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x400002 ***
Filesys: Loaded device.dll
FILESYS: Done launching apps
This device has booted 1 times !!!
+InitDeviceFileSystems
FSDMGR!MountTable_t::RegisterVolumeName: Registered "$device" at index 5FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 5 (Name="$device", MountFlags=0x1)FSDMGR!MountTable_t::RegisterVolumeName: Registered "$bus" at index 6FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 6 (Name="$bus", MountFlags=0x1)-InitDeviceFileSystems: status is 1
Ceddk!CalibrateStallCounter: Enter
Ceddk!CalibrateStallCounter: Could not find stall counter
Ceddk!BeginCalibration: min(171) max(189)
Ceddk!BeginCalibration: Elapsed is 183
Ceddk!BeginCalibration: Delay is 6
DEVICE!DevloadInit
DEVICE!InitDevices: Root Key is Drivers\BuiltIn.
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Prefix) returned 2
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\BusPrefix) returned 2
OSAXST1: >>> Loading Module 'busenum.dll' (0x83F1C364) at address 0xC0280000-0xC028B000 in Process 'NK.EXE' (0x82008AA0)
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\SDBusDriver\BusPrefix) returned 2
OSAXST1: >>> Loading Module 'sdbus.dll' (0x83F1C640) at address 0xC0320000-0xC035A000 in Process 'NK.EXE' (0x82008AA0)
SDBusDriver: PROCESS_ATTACH
SDBusDriver: +SDC_Init
SDBusDriver: Initialize: Using request list depth of 48 entries
SDBusDriver: BusRequestCompleteDispatch Work Item Starting Up
SDBusDriver: Bus Driver instance created : 0xD0048690 ! -SDC_Init
DeviceFolder::LoadDevice(Drivers\BuiltIn\SDBusDriver) last 61 Ticks
完了
我想知道OS是否正常启动了
找不到DISPLAY 是因为我把驱动都没有加载加载驱动时有很多错误所以就不加了确定这个正常后再一个个驱动加上去

sphink10 2009-04-06

打赏
举报

sphink10 2009-04-06

打赏
举报

再看这个：
Packet has the following data:
boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.1.173 Port 03D4 Dest IP 192.168.1.175 Port 0D24
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN

Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x80200000 Length=0x3ea668
-----------------------------------------------------
RAM image
rom_offset=0x0.
ImageStart = 0x80200000, ImageLength = 0x3EA668, LaunchAddr = 0x8022A96C

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x80200000 Length=0x3EA668 Name="" Target=RAM
ROMHDR at Address 80200044h
waitforconnect
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
INFO: OEMLaunch: Jumping to Physical Address 0x3022A96Ch (Virtual Address 0x8022A96Ch)...

CWindows CE Kernel for ARM (Thumb Enabled) Built on Sep 30 2007 at 22:35:41
ProcessorType=0920 Revision=0
OEMAddressTable = 8022a828
DCache: 8 sets, 64 ways, 32 line size, 16384 size
ICache: 8 sets, 64 ways, 32 line size, 16384 size
Error Reporting Memory Reserved, dump size = 00020000
Setting up softlog at 0x83fbc000 for 0x800 entries
Booting Windows CE version 6.00 for (ARM)
&pTOC = 8200ac1c, pTOC = 805e23fc, pTOC->ulRamFree = 8200f000, MemForPT = 00001000

Old or invalid version stamp in kernel structures - starting clean!
Configuring: Primary pages: 8103, Secondary pages: 0, Filesystem pages = 4051

Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 82011000, extension: 00004000, length: 01fa7000
NKStartup done, starting up kernel.
Windows CE KernelInit
Reserve VM for kernel XIP DLls, first = c0010000, last = c0370000
g_pprcNK == 0x82008aa0
Updated eptr->e32_vsize to = 00036000
Initializing Memory Mapped File Support
Scheduling the first thread.
Detecting VFP... VFP Not Found!
LoaderInit: Initialing loader
Updated eptr->e32_vsize to = 00036000
Updated eptr->e32_vsize to = 000a2000
PGPOOL: Reserved 768 pages for Loader pool
PGPOOL: Reserved 256 pages for File pool
OSAXST0: Platform Name = PLATFORM_TYPE
OSAXST1: >>> Loading Module 'kd.dll' (0x83FA0744) at address 0xC0010000-0xC0045000 in Process 'NK.EXE' (0x82008AA0)
KD: Starting kernel debugger software probe (KdStub) - KD API version 22
OSAXST1: >>> Loading Module 'NK.EXE' (0x82008AA0) at address 0x80200000-0x80236000 in Process 'NK.EXE' (0x82008AA0)
Message Queue support initialized, g_hMsgQHeap = d0040770
OSAXST1: >>> Loading Module 'filesys.dll' (0x83FA0E88) at address 0xC0180000-0xC0216000 in Process 'NK.EXE' (0x82008AA0)
OSAXST1: >>> Loading Module 'k.fpcrt.dll' (0x83F7C574) at address 0xC0160000-0xC0178000 in Process 'NK.EXE' (0x82008AA0)
OSAXST1: >>> Loading Module 'fsdmgr.dll' (0x83F7C6BC) at address 0xC02A0000-0xC02E5000 in Process 'NK.EXE' (0x82008AA0)
FSDMGR!DllMain: DLL_PROCESS_ATTACH
CertMod.dll not found, using old OEM Trust Model
FileSystem Starting - starting with clean file system
FSDMGR!STOREMGR_Initialize
FSDMGR!InitializeStoreAPI
FSDMGR!MountTable_t::RegisterVolumeName: Registered "StoreMgr" at index 2FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 2 (Name="StoreMgr", MountFlags=0x1)FSDMGR!InitializeROMFileSystem: File System=ROM
OSAXST1: >>> Loading Module 'romfsd.dll' (0x83F5E930) at address 0xC0220000-0xC0227000 in Process 'NK.EXE' (0x82008AA0)
FSDMGR!MountTable_t::RegisterVolumeName: Registered "ROM" at index 3FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 3 (Name="ROM", MountFlags=0x71)FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of boot registry
FSVOL: Creating clean virtual volume
FSVOL: Initializing volume heap
FSREG: Mounted RAM portion of boot registry
FS: Creating signal event SYSTEM/DevMgrApiSetReady
FSREG: Unable to read value "Start DevMgr" under HKEY_LOCAL_MACHINE\init\BootVars
FILESYS: Starting boot phase 0.
FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1)
FSDMGR: File security disabled.
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1
FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System\StorageManager\AutoLoad, FileSystem_t=ObjectStore
FILESYS: RAM File System FSD_MountDisk registering folder "Object Store"
FSDMGR!MountTable_t::RegisterVolumeName: Registered "Object Store" at index 4FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 4 (Name="", MountFlags=0x46)FILESYS: Starting boot phase 1.
FSDMGR!STOREMGR_StartBootPhase BootPhase=1 (PrevBootPhase=0)
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=1, LoadFlags=1
FILESYS: Waiting for bootable file system to be mounted.
FILESYS: Device started. Boot file system ready.
FSREG: Unable to read value "SystemHiveInitialSize" under HKEY_LOCAL_MACHINE\init\BootVars
FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of system hive
FILESYS: Loading system hive from \Documents and Settings\system.hv.
FSREG: Mounting clean system hive
BuildPath: Documents and Settings
FSVOL: Creating new volume (size=28672 bytes)
FSVOL: Initializing volume heap

paul_chao 2009-04-06

打赏
举报

1. 樓主的問題是
Exception 'Prefetch Abort' (3): Thread-Id=005c0002(pth=83f8d264), Proc-Id=00400002(pprc=82008308) 'NK.EXE', VM-active=00400002(pprc=82008308) 'NK.EXE'
PC=00000000(???+0x00000000) RA=c0572990(smflash.dll+0x00002990) SP=d00bec54, BVA=00000000
Exception 'Raised Exception' (-1): Thread-Id=005c0002(pth=83f8d264), Proc-Id=00400002(pprc=82008308) 'NK.EXE', VM-active=00400002(pprc=82008308) 'NK.EXE'
PC=c0035940(k.coredll.dll+0x00015940) RA=8023849c(kernel.dll+0x0000649c) SP=d00be4d0, BVA=ffffffff

看起來跟 smflash 有關

2. 7 樓的問題是
*** ATTEMPTING TO LOAD DISPLAY DRIVER DDI.DLL! ***
*** COULD NOT LOAD DISPLAY DRIVER (DDI.DLL)! ***
*** ATTEMPTING TO LOAD DISPLAY DRIVER DDI_NOP.DLL! ***
*** COULD NOT LOAD DISPLAY DRIVER (DDI_NOP.DLL)! ***

看起來是沒有 display driver.

所以, 樓主在 build debug mode 時, 不知為何 display driver 不見了.

Paul, Chao @ Techware

sphink10 2009-04-06

打赏
举报

FILESYS已经起来了后面不知道怎么就挂了不知道我理解的对不对看的不是很懂

xqhrs232 2009-04-06

打赏
举报

出错了,把错误解决先

sphink10 2009-04-06

打赏
举报

DEBUG版本的DNW信息如下：（比较长）
RAM image
TFTP: Desktop losing ACK, block number = 3452, Ack again
TFTP: Desktop losing ACK, block number = 5204, Ack again
rom_offset=0x0.
ImageStart = 0x80200000, ImageLength = 0x131EC54, LaunchAddr = 0x8022A96C
Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x80200000 Length=0x131EC54 Name="" Target=RAM
ROMHDR at Address 80200044h
waitforconnect
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
INFO: OEMLaunch: Jumping to Physical Address 0x3022A96Ch (Virtual Address 0x8022A96Ch)...
CWindows CE Kernel for ARM (Thumb Enabled) Built on Sep 30 2007 at 22:35:41
ProcessorType=0920 Revision=0
OEMAddressTable = 8022a828
DCache: 8 sets, 64 ways, 32 line size, 16384 size
ICache: 8 sets, 64 ways, 32 line size, 16384 size
Error Reporting Memory Reserved, dump size = 00020000
Setting up softlog at 0x83fbc000 for 0x800 entries
Booting Windows CE version 6.00 for (ARM)
&pTOC = 8200ac1c, pTOC = 8151dc34, pTOC->ulRamFree = 8200f000, MemForPT = 00001000
Old or invalid version stamp in kernel structures - starting clean!
Configuring: Primary pages: 8103, Secondary pages: 0, Filesystem pages = 4051
Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 82011000, extension: 00004000, length: 01fa7000
NKStartup done, starting up kernel.
Windows CE KernelInit
Reserve VM for kernel XIP DLls, first = c0010000, last = c0920000
g_pprcNK == 0x82008aa0
Updated eptr->e32_vsize to = 00036000
Initializing Memory Mapped File Support
Scheduling the first thread.
Detecting VFP... VFP Not Found!
LoaderInit: Initialing loader
Updated eptr->e32_vsize to = 00036000
Updated eptr->e32_vsize to = 000a2000
PGPOOL: Reserved 768 pages for Loader pool
PGPOOL: Reserved 256 pages for File pool
Message Queue support initialized, g_hMsgQHeap = d0040770
FSDMGR!DllMain: DLL_PROCESS_ATTACH
CertMod.dll not found, using old OEM Trust Model
FileSystem Starting - starting with clean file system
.............................
FSREG: Mounted ROM portion of boot registry
FSVOL: Creating clean virtual volume
FSVOL: Initializing volume heap
FSREG: Mounted RAM portion of boot registry
FS: Creating signal event SYSTEM/DevMgrApiSetReady
FS: Creating signal event SYSTEM/PowerManagerReady
FS: Creating signal event SYSTEM/GweApiSetReady
FSREG: Unable to read value "Start DevMgr" under HKEY_LOCAL_MACHINE\init\BootVars
FILESYS: Starting boot phase 0.
FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1)
FSDMGR: File security disabled.
.....................
FSDMGR!STOREMGR_StartBootPhase BootPhase=1 (PrevBootPhase=0)
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=1, LoadFlags=1
FILESYS: Waiting for bootable file system to be mounted.

.........

NDIS:: CE_DeleteBusFriendlyNames() failed deleting [HKLM\Comm\BusFriendlyNames]
DeviceFolder::LoadDevice(Drivers\BuiltIn\NDIS) last 81 TicksDEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\AFD\Prefix) returned 2
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\AFD\BusPrefix) returned 2
AFD:Init Can't load library ppp.dll
*** New TcpStack ***
[NOTIFY] Module loaded
[NOTIFY] Initializing.
DB:OpenDB fail: DB DB_notify_queue not found
[NOTIFY] Initialization completed successfully
DEVICE!RegReadActivationValues RegQueryValueEx(Comm\Devices\TCPIP\IPDevice\BusPrefix) returned 2
DEVICE!RegReadActivationValues RegQueryValueEx(Comm\Devices\TCPIP\TCPDevice\BusPrefix) returned 2
+TCP_Init(d038d5b4)
!AFD: Unable to load library 'tcpip6.dll'
!AFD: Unable to load library 'irdastk.dll'
!AFD: Unable to load library 'btd.dll'
[NOTIFY] ProcessDatabase::started at local time 03/06/1994 23:34:27
[NOTIFY] HandleSystemEvent 7 /ADD WAM1:
[NOTIFY] HandleSystemEvent 7 /ADD CRD0:
...................................
RdrMain: DLL_PROCESS_ATTACH, hInst:0x83E8BA5C
+RDR:Redir helper func: Ctxt:0x0, OpCode:1
+RDR:InitRedir
Rdrofgt:ntaieeiCni:
ClearTextPasswordAllowed: FALSE
ServerTimeoutMs: 10000
FindCacheMaxSize: 8192
ResourceExpiryInt: 600
ReceiveBufferSize: 9000
RegisterFileSystemRoot: TRUE
ReceiveThreadPriority: 251
AllowedAuthMethods: 3
TimeZoneBias: 480
+RDR:InitNetBIOS
NETBIOS: NB_NET_NOTIFY for callback at address 0xc082e138Browser initialized
+RDR:FSAPIInit
FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 1 (Name="Network", MountFlags=0x80) -RDR:FSAPIInit
DEVICE!RegReadActivationValues RegQueryValueEx(Comm\Devices\Redir\BusPrefix) returned 2
-RDR:InitRedir: initialization successful
!AFD: Unable to load library 'IPNat.dll'
Ws2Instl dllentry() -2081967324
[NOTIFY] HandleSystemEvent 7 /ADD RDR0:
IPDispatchDeviceControl returned Status 103
Ws2Instl:IsStackInstalled - LoadLibrary(irdastk) failed 126
Ws2Instl:IsStackInstalled - LoadLibrary(btd) failed 126
Ws2Instl:IsStackInstalled - LoadLibrary(tcpip6) failed 126
!AFD: Unable to load library 'DhcpV6L.dll'
!AFD: Unable to load library 'tcpip6.dll'
!AFD: Unable to load library 'irdastk.dll'
!AFD: Unable to load library 'btd.dll'
!AFD: Unable to load library 'IPNat.dll'
!AFD: Unable to load library 'DhcpV6L.dll'
-AFD:Init Complete
DeviceFolder::LoadDevice(Drivers\BuiltIn\AFD) last 652 TicksDEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Ws2Serv\BusPrefix) returned 2
udevice.exe $udevice_1002
FSDMGR!MountTable_t::RegisterVolumeName: Registered "$udevice_1002" at index 9APISCreateAPIHandle: pvData == NULL
FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 9 (Name="$udevice_1002", MountFlags=0x101)DeviceFolder::LoadDevice(Drivers\BuiltIn\Ws2Serv) last 92 Ticks[NOTIFY] HandleSystemEvent 7 /ADD WSS1:
FILESYS: SignalStarted loop = 1
FILESYS: Launching gwes.dll
Filesys: Loaded gwes.dll
Ceddk!CalibrateStallCounter: Enter
Ceddk!CalibrateStallCounter: Stall counter loaded from registry(6)
System Default HKL value set to 00000409
Grow Gdi handle table from 0 to 64
LogFontFromRegistry(SYSTEM\GDI\SysFnt), lfHeight = -12*** FAILED TO FIND SPECIFIED DISPLAY DRIVER! ***
*** ATTEMPTING TO LOAD DISPLAY DRIVER DDI.DLL! ***
*** COULD NOT LOAD DISPLAY DRIVER (DDI.DLL)! ***
*** ATTEMPTING TO LOAD DISPLAY DRIVER DDI_NOP.DLL! ***
*** COULD NOT LOAD DISPLAY DRIVER (DDI_NOP.DLL)! ***
*** GWES FAILED TO LOAD A DISPLAY DRIVER!!! PREPARE FOR MAYHEM!!! ***
Unknown: DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\gwe\mgdi\base\.\gdi.cpp at line 2635
DEBUG_BREAK @c024fe94 Ignored.
Coredll: DEBUGCHK failed in file d:\yamafp-1\private\winceos\coreos\core\dll\cscode.c at line 169
DEBUG_BREAK @c0055110 Ignored.
Exception 'Data Abort' (4): Thread-Id=02310002(pth=83e50894), Proc-Id=0040000(pprc=82008aa0) 'NK.EXE', VM-active=00400002(pprc=82008aa0) 'NK.EXE'
PC=c02a19e4(gwes.dll+0x000c19e4) RA=c02a19a0(gwes.dll+0x000c19a0) SP=d059fc64, BVA=00000104
RtlDispatchException: returning failure. Flags=0
NK Kernel: DEBUGCHK failed in file D:\yamafp-1\private\winceos\COREOS\nk\kernel\nknormal\..\exdsptch.c at line 333
DEBUG_BREAK @8025235c Ignored.

Unhandled exception c0000005:
Terminating thread 83e50894
Secondary thread in proc 00400002 faulted, Exception code = c0000005, Exception Address = c02a19e4!
Terminating Thread 02310002

sphink10 2009-04-06

打赏
举报

谢谢shuiyan的耐心回答回一个帖子里就好了发帖时卡了下多点了下我把驱动都不加了用DEBUG版本马上贴上新信息

sphink10 2009-04-06

打赏
举报

谢谢shuiyam的耐心回答正在编译DEBUG版本的等会贴上来回一个帖就好了发帖的时候卡了下我还是先不加驱动了

shuiyan 2009-04-06

打赏
举报

Exception 'Prefetch Abort' (3): Thread-Id=005c0002(pth=83f8d264), Proc-Id=00400002(pprc=82008308) 'NK.EXE', VM-active=00400002(pprc=82008308) 'NK.EXE'
这个在之前的版本有吗？

你看到Powerbutton仅仅是release版本的信息。最好用debug信息看一下出错的具体地方。

sphink10 2009-04-06