Windows CE OSDesign 设置好了之后build就是不通过，求指导！

[viagragu]

NMAKE : U1073: don't know how to make 'D:\osdesigns\OSDesign4\OSDesign4\Wince600\DevKit8500_ARMV4I\cesysgen\oak\lib\ARMV4I\retail\sdcardlib.lib'
BUILD: [01:0000002271:ERRORE] NMAKE.EXE TargetLibFiles -i -c BUILDMSG=Stop. BUILDROOT=C:\WINCE600\PLATFORM\DevKit8500 CLEANBUILD=1 LINKONLY=1 NOPASS0=1 failed - rc = 2
以上是报错信息，在网上搜了些办法，修改ATL的好像也不好用。

[loongembedded]

这个错误是SD卡驱动sources文件的SOURCELIBS中只是SD卡驱动要包含sdcardlib.lib，但是系统中没有找到此lib引起的，无法找到sdcardlib.lib，原因是我们在系统组件中的设备驱动中没有选上SD卡驱动.
我记得选择device drives—SD—SD bus driver

或是device drives->smart card

[viagragu]

多谢！过编译了，不过Attach Device 时候又出错了...
PB Debugger Warning: Debugger service map is set to none. If your image has debugging support it may not boot properly.
PB Debugger Cannot initialize the Kernel Debugger.
PB Debugger The Kernel Debugger is waiting to connect with target.
PB Debugger Debugger could not initialize connection.
PB Debugger The Kernel Debugger has been disconnected successfully.
自己在查，求指点！